From 0d2f6fd3ffd5e7a447233a57112246bc00064752 Mon Sep 17 00:00:00 2001 From: Chris Lesiak Date: Mon, 2 Nov 2015 15:45:03 -0600 Subject: [PATCH] iio: si7020: Swap data byte order The Silicon Labs Si7013, Si7020, and Si7021 family of I2C humidity and temperature sensors deliver 16 bit data high byte first. See the datasheet available at: https://www.silabs.com/Support%20Documents%2fTechnicalDocs%2fSi7020-A20.pdf But as documented in Documentation/i2c/smbus-protocol, i2c_smbus_read_word_data() expects the low byte first. Change the driver to use i2c_smbus_read_word_swapped to get correct byte order. Signed-off-by: Chris Lesiak Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/si7020.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index fa3b809aff5e..1b6935d99100 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -50,10 +50,10 @@ static int si7020_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - ret = i2c_smbus_read_word_data(*client, - chan->type == IIO_TEMP ? - SI7020CMD_TEMP_HOLD : - SI7020CMD_RH_HOLD); + ret = i2c_smbus_read_word_swapped(*client, + chan->type == IIO_TEMP ? + SI7020CMD_TEMP_HOLD : + SI7020CMD_RH_HOLD); if (ret < 0) return ret; *val = ret >> 2; -- 2.20.1