From 0ce88b34ea5a1b48438848739a72da6b4fe7a5fa Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Mon, 7 Mar 2011 11:45:07 +0100 Subject: [PATCH] mach-mx31_3ds: Add support for the MMC slot of the personality board Signed-off-by: Alberto Panizzo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31_3ds.c | 99 +++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index f1dbb9d4a84d..cff920696e79 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "devices-imx31.h" #include "devices.h" @@ -99,6 +100,85 @@ static int mx31_3ds_pins[] = { /* I2C1 */ MX31_PIN_I2C_CLK__I2C1_SCL, MX31_PIN_I2C_DAT__I2C1_SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */ + MX31_PIN_GPIO3_0__GPIO3_0, /* OE */ +}; + +/* + * Support for SD card slot in personality board + */ +#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) + +static struct gpio mx31_3ds_sdhc1_gpios[] = { + { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" }, + { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" }, +}; + +static int mx31_3ds_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + if (ret) { + pr_warning("Unable to request the SD/MMC GPIOs.\n"); + return ret; + } + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + detect_irq, IRQF_DISABLED | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "sdhc1-detect", data); + if (ret) { + pr_warning("Unable to request the SD/MMC card-detect IRQ.\n"); + goto gpio_free; + } + + return 0; + +gpio_free: + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + return ret; +} + +static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data); + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); +} + +static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd) +{ + /* + * While the voltage stuff is done by the driver, activate the + * Buffer Enable Pin only if there is a card in slot to fix the card + * voltage issue caused by bi-directional chip TXB0108 on 3Stack. + * Done here because at this stage we have for sure a debounced value + * of the presence of the card, showed by the value of vdd. + * 7 == ilog2(MMC_VDD_165_195) + */ + if (vdd > 7) + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1); + else + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx31_3ds_sdhc1_init, + .exit = mx31_3ds_sdhc1_exit, + .setpower = mx31_3ds_sdhc1_setpower, }; /* @@ -137,6 +217,21 @@ static struct regulator_init_data gpo_init = { } }; +static struct regulator_consumer_supply vmmc2_consumers[] = { + REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"), +}; + +static struct regulator_init_data vmmc2_init = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers), + .consumer_supplies = vmmc2_consumers, +}; + static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ @@ -151,6 +246,9 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { }, { .id = MC13783_REG_GPO3, /* Turn on 3.3V */ .init_data = &gpo_init, + }, { + .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */ + .init_data = &vmmc2_init, }, }; @@ -362,6 +460,7 @@ static void __init mx31_3ds_init(void) "devices on the debug board are unusable.\n"); imx31_add_imx2_wdt(NULL); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); + imx31_add_mxc_mmc(0, &sdhc1_pdata); } static void __init mx31_3ds_timer_init(void) -- 2.20.1