From 0bc14d061bd8836eeff956cfbbcb53266af793ef Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 28 Oct 2014 10:32:07 +0100 Subject: [PATCH] ath10k: split reset logic from power up The power up procedure was overly complex due to warm/cold reset workarounds and issues. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/pci.c | 151 ++++++++++++++------------ 1 file changed, 80 insertions(+), 71 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index af36730e95df..117e14d27c62 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1792,10 +1792,86 @@ static int ath10k_pci_warm_reset(struct ath10k *ar) return 0; } -static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset) +static int ath10k_pci_chip_reset(struct ath10k *ar) +{ + int i, ret; + u32 val; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset\n"); + + /* Some hardware revisions (e.g. CUS223v2) has issues with cold reset. + * It is thus preferred to use warm reset which is safer but may not be + * able to recover the device from all possible fail scenarios. + * + * Warm reset doesn't always work on first try so attempt it a few + * times before giving up. + */ + for (i = 0; i < ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS; i++) { + ret = ath10k_pci_warm_reset(ar); + if (ret) { + ath10k_warn(ar, "failed to warm reset attempt %d of %d: %d\n", + i + 1, ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS, + ret); + continue; + } + + /* FIXME: Sometimes copy engine doesn't recover after warm + * reset. In most cases this needs cold reset. In some of these + * cases the device is in such a state that a cold reset may + * lock up the host. + * + * Reading any host interest register via copy engine is + * sufficient to verify if device is capable of booting + * firmware blob. + */ + ret = ath10k_pci_init_pipes(ar); + if (ret) { + ath10k_warn(ar, "failed to init copy engine: %d\n", + ret); + continue; + } + + ret = ath10k_pci_diag_read32(ar, QCA988X_HOST_INTEREST_ADDRESS, + &val); + if (ret) { + ath10k_warn(ar, "failed to poke copy engine: %d\n", + ret); + continue; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset complete (warm)\n"); + return 0; + } + + if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY) { + ath10k_warn(ar, "refusing cold reset as requested\n"); + return -EPERM; + } + + ret = ath10k_pci_cold_reset(ar); + if (ret) { + ath10k_warn(ar, "failed to cold reset: %d\n", ret); + return ret; + } + + ret = ath10k_pci_wait_for_target_init(ar); + if (ret) { + ath10k_warn(ar, "failed to wait for target after cold reset: %d\n", + ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset complete (cold)\n"); + + return 0; +} + +static int ath10k_pci_hif_power_up(struct ath10k *ar) { int ret; + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power up\n"); + /* * Bring the target up cleanly. * @@ -1806,13 +1882,9 @@ static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset) * is in an unexpected state. We try to catch that here in order to * reset the Target and retry the probe. */ - if (cold_reset) - ret = ath10k_pci_cold_reset(ar); - else - ret = ath10k_pci_warm_reset(ar); - + ret = ath10k_pci_chip_reset(ar); if (ret) { - ath10k_err(ar, "failed to reset target: %d\n", ret); + ath10k_err(ar, "failed to reset chip: %d\n", ret); goto err; } @@ -1822,12 +1894,6 @@ static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset) goto err; } - ret = ath10k_pci_wait_for_target_init(ar); - if (ret) { - ath10k_err(ar, "failed to wait for target to init: %d\n", ret); - goto err_ce; - } - ret = ath10k_pci_init_config(ar); if (ret) { ath10k_err(ar, "failed to setup init config: %d\n", ret); @@ -1844,68 +1910,11 @@ static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset) err_ce: ath10k_pci_ce_deinit(ar); - ath10k_pci_warm_reset(ar); -err: - return ret; -} - -static int ath10k_pci_hif_power_up_warm(struct ath10k *ar) -{ - int i, ret; - - /* - * Sometime warm reset succeeds after retries. - * - * FIXME: It might be possible to tune ath10k_pci_warm_reset() to work - * at first try. - */ - for (i = 0; i < ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS; i++) { - ret = __ath10k_pci_hif_power_up(ar, false); - if (ret == 0) - break; - - ath10k_warn(ar, "failed to warm reset (attempt %d out of %d): %d\n", - i + 1, ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS, ret); - } +err: return ret; } -static int ath10k_pci_hif_power_up(struct ath10k *ar) -{ - int ret; - - ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power up\n"); - - /* - * Hardware CUS232 version 2 has some issues with cold reset and the - * preferred (and safer) way to perform a device reset is through a - * warm reset. - * - * Warm reset doesn't always work though so fall back to cold reset may - * be necessary. - */ - ret = ath10k_pci_hif_power_up_warm(ar); - if (ret) { - ath10k_warn(ar, "failed to power up target using warm reset: %d\n", - ret); - - if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY) - return ret; - - ath10k_warn(ar, "trying cold reset\n"); - - ret = __ath10k_pci_hif_power_up(ar, true); - if (ret) { - ath10k_err(ar, "failed to power up target using cold reset too (%d)\n", - ret); - return ret; - } - } - - return 0; -} - static void ath10k_pci_hif_power_down(struct ath10k *ar) { ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n"); -- 2.20.1