From 0ba4887c6329043d6cee5b5b477cfe50c2b57674 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Jan 2009 11:50:23 -0800 Subject: [PATCH] regulator: fix kernel-doc warnings Fix kernel-doc warnings in regulator/driver.h: Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq' Signed-off-by: Randy Dunlap cc: Liam Girdwood cc: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 84c3737c2d26..2dae05705f13 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -29,16 +29,12 @@ struct regulator_init_data; * * @enable: Enable the regulator. * @disable: Disable the regulator. - * @is_enabled: Return 1 if the reguator is enabled, 0 otherwise. + * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. * @get_voltage: Return the currently configured voltage for the regulator. * - * @set_current: Set the current for the regulator within the range specified. - * The driver should select the current closest to min_uA. - * @get_current: Return the currently configured current for the regulator. - * * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the limit for a current-limited regulator. * @@ -111,6 +107,7 @@ enum regulator_type { * @name: Identifying name for the regulator. * @id: Numerical identifier for the regulator. * @ops: Regulator operations table. + * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. */ -- 2.20.1