From 082717ead9f5836fac1b2757aad38f652cc63636 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 25 Jun 2014 22:01:51 +0300 Subject: [PATCH] drm/i915: Move the SPLL enabling into hsw_crt_pre_enable The call to intel_ddi_pll_enable in haswell_crtc_mode_set is the only function that still touches the hardware state from the crtc mode_set callback on hsw. Since the SPLL isn't ever shared we can easily take it out into the hsw crt encoder functions. Temporarily we'll loose a bit of WARN_ON coverage with this, but once the WRPLLs are switched over that will be restored. For the SPLL selection add a WARN in the hsw fdi link training code. Signed-off-by: Daniel Vetter [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 13 +++++++++++++ drivers/gpu/drm/i915/intel_ddi.c | 19 +------------------ 2 files changed, 14 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 5a045d3bd77e..d312cf89c00a 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -137,6 +137,18 @@ static void hsw_crt_get_config(struct intel_encoder *encoder, pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder); } +static void hsw_crt_pre_enable(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL already enabled\n"); + I915_WRITE(SPLL_CTL, + SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC); + POSTING_READ(SPLL_CTL); + udelay(20); +} + /* Note: The caller is required to filter out dpms modes not supported by the * platform. */ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode) @@ -860,6 +872,7 @@ void intel_crt_init(struct drm_device *dev) if (HAS_DDI(dev)) { crt->base.get_config = hsw_crt_get_config; crt->base.get_hw_state = intel_ddi_get_hw_state; + crt->base.pre_enable = hsw_crt_pre_enable; } else { crt->base.get_config = intel_crt_get_config; crt->base.get_hw_state = intel_crt_get_hw_state; diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 8c57f9a141db..991ad0b9859c 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -278,6 +278,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) /* Configure Port Clock Select */ I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel); + WARN_ON(intel_crtc->ddi_pll_sel != PORT_CLK_SEL_SPLL); /* Start the training iterating through available voltages and emphasis, * testing each value twice. */ @@ -848,23 +849,6 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc) BUILD_BUG_ON(enable_bit != WRPLL_PLL_ENABLE); switch (crtc->ddi_pll_sel) { - case PORT_CLK_SEL_LCPLL_2700: - case PORT_CLK_SEL_LCPLL_1350: - case PORT_CLK_SEL_LCPLL_810: - /* - * LCPLL should always be enabled at this point of the mode set - * sequence, so nothing to do. - */ - return; - - case PORT_CLK_SEL_SPLL: - new_val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | - SPLL_PLL_SSC; - WARN(I915_READ(SPLL_CTL) & enable_bit, "SPLL already enabled\n"); - I915_WRITE(SPLL_CTL, new_val); - POSTING_READ(SPLL_CTL); - udelay(20); - return; case PORT_CLK_SEL_WRPLL1: case PORT_CLK_SEL_WRPLL2: if (crtc->ddi_pll_sel == PORT_CLK_SEL_WRPLL1) { @@ -889,7 +873,6 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc) WARN(1, "Bad selected pll: PORT_CLK_SEL_NONE\n"); return; default: - WARN(1, "Bad selected pll: 0x%08x\n", crtc->ddi_pll_sel); return; } -- 2.20.1