From 080e6795cba316663a5eb4f49500937eca4f32cd Mon Sep 17 00:00:00 2001 From: "Spencer E. Olson" Date: Wed, 27 Jan 2016 14:28:27 -0700 Subject: [PATCH] staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd This patch implements ni_ao_cmd much more closely organized like NI MHDDK examples and DAQ-STC pseudo-code. Adds comments with some more specific references to the DAQ-STC. For stop_src==TRIG_NONE (continuous output mode of entire buffer), the count for the UC counter was corrected to represent the maximum count possible (0xffffff). Prior behavior for stop_src=TRIG_NONE did not actually follow the DAQ-STC. Furthermore, stop_src==TRIG_NONE now correctly uses code specialized for either m-series or e-series devices. It should be noted that stop_src==TRIG_NONE does _not_ with this patch (or with prior behavior in ni_mio_common) actually implement true continuous output. Rather, the output is simply configured to operate as a single buffer output, but where the buffer is as large as is possible with NI-STC hardware. Signed-off-by: Spencer E. Olson Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- .../staging/comedi/drivers/ni_mio_common.c | 443 +++++++++++++----- 1 file changed, 318 insertions(+), 125 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 9df20d922d32..8f0fe3a26c73 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -2912,42 +2912,68 @@ static int ni_ao_inttrig(struct comedi_device *dev, return 0; } -static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) +/* + * begin ni_ao_cmd. + * Organized similar to NI-STC and MHDDK examples. + * ni_ao_cmd is broken out into configuration sub-routines for clarity. + */ + +static void ni_ao_cmd_personalize(struct comedi_device *dev, + const struct comedi_cmd *cmd) { const struct ni_board_struct *board = dev->board_ptr; - struct ni_private *devpriv = dev->private; - const struct comedi_cmd *cmd = &s->async->cmd; - int bits; - int i; - unsigned trigvar; - unsigned val; - - if (dev->irq == 0) { - dev_err(dev->class_dev, "cannot run command without an irq\n"); - return -EIO; - } + unsigned bits; ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); - ni_stc_writew(dev, NISTC_AO_CMD1_DISARM, NISTC_AO_CMD1_REG); + bits = + /* fast CPU interface--only eseries */ + /* ((slow CPU interface) ? 0 : AO_Fast_CPU) | */ + NISTC_AO_PERSONAL_BC_SRC_SEL | + 0 /* (use_original_pulse ? 0 : NISTC_AO_PERSONAL_UPDATE_TIMEBASE) */ | + /* + * FIXME: start setting following bit when appropriate. Need to + * determine whether board is E4 or E1. + * FROM MHHDK: + * if board is E4 or E1 + * Set bit "NISTC_AO_PERSONAL_UPDATE_PW" to 0 + * else + * set it to 1 + */ + NISTC_AO_PERSONAL_UPDATE_PW | + /* FIXME: when should we set following bit to zero? */ + NISTC_AO_PERSONAL_TMRDACWR_PW | + (board->ao_fifo_depth ? + NISTC_AO_PERSONAL_FIFO_ENA : NISTC_AO_PERSONAL_DMA_PIO_CTRL) + ; +#if 0 + /* + * FIXME: + * add something like ".has_individual_dacs = 0" to ni_board_struct + * since, as F Hess pointed out, not all in m series have singles. not + * sure if e-series all have duals... + */ - if (devpriv->is_6xxx) { - ni_ao_win_outw(dev, NI611X_AO_MISC_CLEAR_WG, - NI611X_AO_MISC_REG); + /* + * F Hess: windows driver does not set NISTC_AO_PERSONAL_NUM_DAC bit for + * 6281, verified with bus analyzer. + */ + if (devpriv->is_m_series) + bits |= NISTC_AO_PERSONAL_NUM_DAC; +#endif + ni_stc_writew(dev, bits, NISTC_AO_PERSONAL_REG); - bits = 0; - for (i = 0; i < cmd->chanlist_len; i++) { - int chan; + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} - chan = CR_CHAN(cmd->chanlist[i]); - bits |= 1 << chan; - ni_ao_win_outw(dev, chan, NI611X_AO_WAVEFORM_GEN_REG); - } - ni_ao_win_outw(dev, bits, NI611X_AO_TIMED_REG); - } +static void ni_ao_cmd_set_trigger(struct comedi_device *dev, + const struct comedi_cmd *cmd) +{ + struct ni_private *devpriv = dev->private; - ni_ao_config_chanlist(dev, s, cmd->chanlist, cmd->chanlist_len, 1); + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); + /* sync */ if (cmd->stop_src == TRIG_NONE) { devpriv->ao_mode1 |= NISTC_AO_MODE1_CONTINUOUS; devpriv->ao_mode1 &= ~NISTC_AO_MODE1_TRIGGER_ONCE; @@ -2957,179 +2983,346 @@ static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } ni_stc_writew(dev, devpriv->ao_mode1, NISTC_AO_MODE1_REG); - val = devpriv->ao_trigger_select; - switch (cmd->start_src) { - case TRIG_INT: - case TRIG_NOW: - val &= ~(NISTC_AO_TRIG_START1_POLARITY | - NISTC_AO_TRIG_START1_SEL_MASK); - val |= NISTC_AO_TRIG_START1_EDGE | - NISTC_AO_TRIG_START1_SYNC; - break; - case TRIG_EXT: - val = NISTC_AO_TRIG_START1_SEL(CR_CHAN(cmd->start_arg) + 1); - if (cmd->start_arg & CR_INVERT) { - /* 0=active high, 1=active low. see daq-stc 3-24 (p186) */ - val |= NISTC_AO_TRIG_START1_POLARITY; - } - if (cmd->start_arg & CR_EDGE) { - /* 0=edge detection disabled, 1=enabled */ - val |= NISTC_AO_TRIG_START1_EDGE; + { + unsigned int trigsel = devpriv->ao_trigger_select; + + switch (cmd->start_src) { + case TRIG_INT: + case TRIG_NOW: + trigsel &= ~(NISTC_AO_TRIG_START1_POLARITY | + NISTC_AO_TRIG_START1_SEL_MASK); + trigsel |= NISTC_AO_TRIG_START1_EDGE | + NISTC_AO_TRIG_START1_SYNC; + break; + case TRIG_EXT: + trigsel = NISTC_AO_TRIG_START1_SEL( + CR_CHAN(cmd->start_arg) + 1); + if (cmd->start_arg & CR_INVERT) + /* + * 0=active high, 1=active low. + * see daq-stc 3-24 (p186) + */ + trigsel |= NISTC_AO_TRIG_START1_POLARITY; + if (cmd->start_arg & CR_EDGE) + /* 0=edge detection disabled, 1=enabled */ + trigsel |= NISTC_AO_TRIG_START1_EDGE; + break; + default: + BUG(); + break; } + + devpriv->ao_trigger_select = trigsel; ni_stc_writew(dev, devpriv->ao_trigger_select, NISTC_AO_TRIG_SEL_REG); - break; - default: - BUG(); - break; } - devpriv->ao_trigger_select = val; - ni_stc_writew(dev, devpriv->ao_trigger_select, NISTC_AO_TRIG_SEL_REG); + /* AO_Delayed_START1 = 0, we do not support delayed start...yet */ + /* sync */ + /* select DA_START1 as PFI6/AO_START1 when configured as an output */ devpriv->ao_mode3 &= ~NISTC_AO_MODE3_TRIG_LEN; ni_stc_writew(dev, devpriv->ao_mode3, NISTC_AO_MODE3_REG); + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} + +static void ni_ao_cmd_set_counters(struct comedi_device *dev, + const struct comedi_cmd *cmd) +{ + struct ni_private *devpriv = dev->private; + /* Not supporting 'waveform staging' or 'local buffer with pauses' */ + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); + /* + * This relies on ao_mode1/(Trigger_Once | Continuous) being set in + * set_trigger above. It is unclear whether we really need to re-write + * this register with these values. The mhddk examples for e-series + * show writing this in both places, but the examples for m-series show + * a single write in the set_counters function (here). + */ ni_stc_writew(dev, devpriv->ao_mode1, NISTC_AO_MODE1_REG); + + /* sync (upload number of buffer iterations -1) */ + /* indicate that we want to use BC_Load_A_Register as the source */ devpriv->ao_mode2 &= ~NISTC_AO_MODE2_BC_INIT_LOAD_SRC; ni_stc_writew(dev, devpriv->ao_mode2, NISTC_AO_MODE2_REG); - if (cmd->stop_src == TRIG_NONE) - ni_stc_writel(dev, 0xffffff, NISTC_AO_BC_LOADA_REG); - else - ni_stc_writel(dev, 0, NISTC_AO_BC_LOADA_REG); + + /* + * if the BC_TC interrupt is still issued in spite of UC, BC, UI + * ignoring BC_TC, then we will need to find a way to ignore that + * interrupt in continuous mode. + */ + ni_stc_writel(dev, 0, NISTC_AO_BC_LOADA_REG); /* iter once */ + + /* sync (issue command to load number of buffer iterations -1) */ ni_stc_writew(dev, NISTC_AO_CMD1_BC_LOAD, NISTC_AO_CMD1_REG); + + /* sync (upload number of updates in buffer) */ + /* indicate that we want to use UC_Load_A_Register as the source */ devpriv->ao_mode2 &= ~NISTC_AO_MODE2_UC_INIT_LOAD_SRC; ni_stc_writew(dev, devpriv->ao_mode2, NISTC_AO_MODE2_REG); - switch (cmd->stop_src) { - case TRIG_COUNT: + + { + /* + * Current behavior is to configure the maximum update count + * possible when continuous output mode is requested. + */ + unsigned int stop_arg = cmd->stop_src == TRIG_COUNT ? + (cmd->stop_arg & 0xffffff) : 0xffffff; + if (devpriv->is_m_series) { - /* this is how the NI example code does it for m-series boards, verified correct with 6259 */ - ni_stc_writel(dev, cmd->stop_arg - 1, - NISTC_AO_UC_LOADA_REG); + /* + * this is how the NI example code does it for m-series + * boards, verified correct with 6259 + */ + ni_stc_writel(dev, stop_arg - 1, NISTC_AO_UC_LOADA_REG); + + /* sync (issue cmd to load number of updates in MISB) */ ni_stc_writew(dev, NISTC_AO_CMD1_UC_LOAD, NISTC_AO_CMD1_REG); } else { - ni_stc_writel(dev, cmd->stop_arg, - NISTC_AO_UC_LOADA_REG); + ni_stc_writel(dev, stop_arg, NISTC_AO_UC_LOADA_REG); + + /* sync (issue cmd to load number of updates in MISB) */ ni_stc_writew(dev, NISTC_AO_CMD1_UC_LOAD, NISTC_AO_CMD1_REG); - ni_stc_writel(dev, cmd->stop_arg - 1, - NISTC_AO_UC_LOADA_REG); + + /* + * sync (upload number of updates-1 in MISB) + * --eseries only? + */ + ni_stc_writel(dev, stop_arg - 1, NISTC_AO_UC_LOADA_REG); } - break; - case TRIG_NONE: - ni_stc_writel(dev, 0xffffff, NISTC_AO_UC_LOADA_REG); - ni_stc_writew(dev, NISTC_AO_CMD1_UC_LOAD, NISTC_AO_CMD1_REG); - ni_stc_writel(dev, 0xffffff, NISTC_AO_UC_LOADA_REG); - break; - default: - ni_stc_writel(dev, 0, NISTC_AO_UC_LOADA_REG); - ni_stc_writew(dev, NISTC_AO_CMD1_UC_LOAD, NISTC_AO_CMD1_REG); - ni_stc_writel(dev, cmd->stop_arg, NISTC_AO_UC_LOADA_REG); } - devpriv->ao_mode1 &= ~(NISTC_AO_MODE1_UPDATE_SRC_MASK | - NISTC_AO_MODE1_UI_SRC_MASK | - NISTC_AO_MODE1_UPDATE_SRC_POLARITY | - NISTC_AO_MODE1_UI_SRC_POLARITY); + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} + +static void ni_ao_cmd_set_update(struct comedi_device *dev, + const struct comedi_cmd *cmd) +{ + struct ni_private *devpriv = dev->private; + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); + + /* + * zero out these bit fields to be set below. Does an ao-reset do this + * automatically? + */ + devpriv->ao_mode1 &= ~( + NISTC_AO_MODE1_UI_SRC_MASK | + NISTC_AO_MODE1_UI_SRC_POLARITY | + NISTC_AO_MODE1_UPDATE_SRC_MASK | + NISTC_AO_MODE1_UPDATE_SRC_POLARITY + ); + switch (cmd->scan_begin_src) { case TRIG_TIMER: - devpriv->ao_cmd2 &= ~NISTC_AO_CMD2_BC_GATE_ENA; - trigvar = - ni_ns_to_timer(dev, cmd->scan_begin_arg, - CMDF_ROUND_NEAREST); - ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG); - ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, NISTC_AO_CMD1_REG); - ni_stc_writel(dev, trigvar, NISTC_AO_UI_LOADA_REG); + devpriv->ao_cmd2 &= ~NISTC_AO_CMD2_BC_GATE_ENA; + + /* + * NOTE: there are several other ways of configuring internal + * updates, but we'll only support one for now: using + * AO_IN_TIMEBASE, w/o waveform staging, w/o a delay between + * START1 and first update, and also w/o local buffer mode w/ + * pauses. + */ + + /* + * This is already done above: + * devpriv->ao_mode1 &= ~( + * // set UPDATE_Source to UI_TC: + * NISTC_AO_MODE1_UPDATE_SRC_MASK | + * // set UPDATE_Source_Polarity to rising (required?) + * NISTC_AO_MODE1_UPDATE_SRC_POLARITY | + * // set UI_Source to AO_IN_TIMEBASE1: + * NISTC_AO_MODE1_UI_SRC_MASK | + * // set UI_Source_Polarity to rising (required?) + * NISTC_AO_MODE1_UI_SRC_POLARITY + * ); + */ + + /* + * TODO: use ao_ui_clock_source to allow all possible signals + * to be routed to UI_Source_Select. See tSTC.h for + * eseries/ni67xx and tMSeries.h for mseries. + */ + + { + unsigned trigvar = ni_ns_to_timer(dev, + cmd->scan_begin_arg, + CMDF_ROUND_NEAREST); + + /* + * Wait N TB3 ticks after the start trigger before + * clocking(N must be >=2). + */ + /* following line: 2-1 per STC */ + ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG); + ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, + NISTC_AO_CMD1_REG); + /* following line: N-1 per STC */ + ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG); + } break; case TRIG_EXT: - devpriv->ao_mode1 |= - NISTC_AO_MODE1_UPDATE_SRC(cmd->scan_begin_arg); + /* FIXME: assert scan_begin_arg != 0, ret failure otherwise */ + devpriv->ao_cmd2 |= NISTC_AO_CMD2_BC_GATE_ENA; + devpriv->ao_mode1 |= NISTC_AO_MODE1_UPDATE_SRC( + CR_CHAN(cmd->scan_begin_arg)); if (cmd->scan_begin_arg & CR_INVERT) devpriv->ao_mode1 |= NISTC_AO_MODE1_UPDATE_SRC_POLARITY; - devpriv->ao_cmd2 |= NISTC_AO_CMD2_BC_GATE_ENA; break; default: BUG(); break; } + ni_stc_writew(dev, devpriv->ao_cmd2, NISTC_AO_CMD2_REG); ni_stc_writew(dev, devpriv->ao_mode1, NISTC_AO_MODE1_REG); devpriv->ao_mode2 &= ~(NISTC_AO_MODE2_UI_RELOAD_MODE(3) | NISTC_AO_MODE2_UI_INIT_LOAD_SRC); ni_stc_writew(dev, devpriv->ao_mode2, NISTC_AO_MODE2_REG); + /* Configure DAQ-STC for Timed update mode */ + devpriv->ao_cmd1 |= NISTC_AO_CMD1_DAC1_UPDATE_MODE | + NISTC_AO_CMD1_DAC0_UPDATE_MODE; + /* We are not using UPDATE2-->don't have to set DACx_Source_Select */ + ni_stc_writew(dev, devpriv->ao_cmd1, NISTC_AO_CMD1_REG); + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} + +static void ni_ao_cmd_set_channels(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + struct ni_private *devpriv = dev->private; + const struct comedi_cmd *cmd = &s->async->cmd; + unsigned bits = 0; + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); + + if (devpriv->is_6xxx) { + unsigned int i; + + bits = 0; + for (i = 0; i < cmd->chanlist_len; ++i) { + int chan = CR_CHAN(cmd->chanlist[i]); + + bits |= 1 << chan; + ni_ao_win_outw(dev, chan, NI611X_AO_WAVEFORM_GEN_REG); + } + ni_ao_win_outw(dev, bits, NI611X_AO_TIMED_REG); + } + + ni_ao_config_chanlist(dev, s, cmd->chanlist, cmd->chanlist_len, 1); + if (cmd->scan_end_arg > 1) { devpriv->ao_mode1 |= NISTC_AO_MODE1_MULTI_CHAN; - ni_stc_writew(dev, - NISTC_AO_OUT_CTRL_CHANS(cmd->scan_end_arg - 1) | - NISTC_AO_OUT_CTRL_UPDATE_SEL_HIGHZ, - NISTC_AO_OUT_CTRL_REG); - } else { - unsigned bits; + bits = NISTC_AO_OUT_CTRL_CHANS(cmd->scan_end_arg - 1) + | NISTC_AO_OUT_CTRL_UPDATE_SEL_HIGHZ; + } else { devpriv->ao_mode1 &= ~NISTC_AO_MODE1_MULTI_CHAN; bits = NISTC_AO_OUT_CTRL_UPDATE_SEL_HIGHZ; - if (devpriv->is_m_series || devpriv->is_6xxx) { + if (devpriv->is_m_series | devpriv->is_6xxx) bits |= NISTC_AO_OUT_CTRL_CHANS(0); - } else { - bits |= - NISTC_AO_OUT_CTRL_CHANS(CR_CHAN(cmd->chanlist[0])); - } - ni_stc_writew(dev, bits, NISTC_AO_OUT_CTRL_REG); + else + bits |= NISTC_AO_OUT_CTRL_CHANS( + CR_CHAN(cmd->chanlist[0])); } + ni_stc_writew(dev, devpriv->ao_mode1, NISTC_AO_MODE1_REG); + ni_stc_writew(dev, bits, NISTC_AO_OUT_CTRL_REG); - /* Configure DAQ-STC for Timed update mode */ - devpriv->ao_cmd1 |= NISTC_AO_CMD1_DAC1_UPDATE_MODE | - NISTC_AO_CMD1_DAC0_UPDATE_MODE; - /* We are not using UPDATE2-->don't have to set DACx_Source_Select */ - ni_stc_writew(dev, devpriv->ao_cmd1, NISTC_AO_CMD1_REG); + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} + +static void ni_ao_cmd_set_stop_conditions(struct comedi_device *dev, + const struct comedi_cmd *cmd) +{ + struct ni_private *devpriv = dev->private; + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); devpriv->ao_mode3 |= NISTC_AO_MODE3_STOP_ON_OVERRUN_ERR; ni_stc_writew(dev, devpriv->ao_mode3, NISTC_AO_MODE3_REG); + /* + * Since we are not supporting waveform staging, we ignore these errors: + * NISTC_AO_MODE3_STOP_ON_BC_TC_ERR, + * NISTC_AO_MODE3_STOP_ON_BC_TC_TRIG_ERR + */ + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); +} + +static void ni_ao_cmd_set_fifo_mode(struct comedi_device *dev) +{ + struct ni_private *devpriv = dev->private; + + ni_stc_writew(dev, NISTC_RESET_AO_CFG_START, NISTC_RESET_REG); + devpriv->ao_mode2 &= ~NISTC_AO_MODE2_FIFO_MODE_MASK; #ifdef PCIDMA devpriv->ao_mode2 |= NISTC_AO_MODE2_FIFO_MODE_HF_F; #else devpriv->ao_mode2 |= NISTC_AO_MODE2_FIFO_MODE_HF; #endif + /* NOTE: this is where use_onboard_memory=True would be implemented */ devpriv->ao_mode2 &= ~NISTC_AO_MODE2_FIFO_REXMIT_ENA; ni_stc_writew(dev, devpriv->ao_mode2, NISTC_AO_MODE2_REG); - bits = NISTC_AO_PERSONAL_BC_SRC_SEL | - NISTC_AO_PERSONAL_UPDATE_PW | - NISTC_AO_PERSONAL_TMRDACWR_PW; - if (board->ao_fifo_depth) - bits |= NISTC_AO_PERSONAL_FIFO_ENA; - else - bits |= NISTC_AO_PERSONAL_DMA_PIO_CTRL; -#if 0 - /* - * F Hess: windows driver does not set NISTC_AO_PERSONAL_NUM_DAC bit - * for 6281, verified with bus analyzer. - */ - if (devpriv->is_m_series) - bits |= NISTC_AO_PERSONAL_NUM_DAC; -#endif - ni_stc_writew(dev, bits, NISTC_AO_PERSONAL_REG); - /* enable sending of ao dma requests */ + /* enable sending of ao fifo requests (dma request) */ ni_stc_writew(dev, NISTC_AO_START_AOFREQ_ENA, NISTC_AO_START_SEL_REG); ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG); - if (cmd->stop_src == TRIG_COUNT) { - ni_stc_writew(dev, NISTC_INTB_ACK_AO_BC_TC, - NISTC_INTB_ACK_REG); + /* we are not supporting boards with virtual fifos */ +} + +static void ni_ao_cmd_set_interrupts(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + if (s->async->cmd.stop_src == TRIG_COUNT) ni_set_bits(dev, NISTC_INTB_ENA_REG, NISTC_INTB_ENA_AO_BC_TC, 1); - } s->async->inttrig = ni_ao_inttrig; +} +static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) +{ + struct ni_private *devpriv = dev->private; + const struct comedi_cmd *cmd = &s->async->cmd; + + if (dev->irq == 0) { + dev_err(dev->class_dev, "cannot run command without an irq"); + return -EIO; + } + + /* ni_ao_reset should have already been done */ + ni_ao_cmd_personalize(dev, cmd); + /* clearing fifo and preload happens elsewhere */ + + ni_ao_cmd_set_trigger(dev, cmd); + ni_ao_cmd_set_counters(dev, cmd); + ni_ao_cmd_set_update(dev, cmd); + ni_ao_cmd_set_channels(dev, s); + ni_ao_cmd_set_stop_conditions(dev, cmd); + ni_ao_cmd_set_fifo_mode(dev); + ni_ao_cmd_set_interrupts(dev, s); + + /* + * arm(ing) and star(ting) happen in ni_ao_inttrig, which _must_ be + * called for ao commands since 1) TRIG_NOW is not supported and 2) DMA + * must be setup and initially written to before arm/start happen. + */ return 0; } +/* end ni_ao_cmd */ + static int ni_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) { -- 2.20.1