From 070ed7335961825f6c1a137b929c67627c31c907 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:19:35 +0100 Subject: [PATCH] ARM i.MX35 pcm043: put usbh1 outside CONFIG_USB_ULPI The usbh1 port of the pcm043 does not use ulpi, so put it outside the corresponding ifdefs. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-pcm043.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index a27022d15c27..a515290f15fc 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -310,13 +310,13 @@ static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +#endif static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -382,9 +382,9 @@ static void __init mxc_board_init(void) imx35_add_mxc_ehci_otg(&otg_pdata); } - - imx35_add_mxc_ehci_hs(&usbh1_pdata); #endif + imx35_add_mxc_ehci_hs(&usbh1_pdata); + if (!otg_mode_host) imx35_add_fsl_usb2_udc(&otg_device_pdata); -- 2.20.1