From 06892f2ea2bd6b146707e4ab367aa5b20eac0ba7 Mon Sep 17 00:00:00 2001 From: Tomer Tayar Date: Tue, 23 May 2017 09:41:24 +0300 Subject: [PATCH] qed: Flush slowpath tasklet on stop Today, driver has a synchronization point while closing the device which synchronizes its slowpath interrupt line. However, that's insufficient as that ISR would schedule the slowpath-tasklet - so even after ISR is over it's possible the handling of the interrupt has not completed. By doing a disable/enable on the taskelt we guarantee that all HW events that should no longer be genereated from that point onward in the flow are truly behind us. Signed-off-by: Tomer Tayar Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index f286daa59bbc..3043dcce125c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -606,6 +606,18 @@ int qed_slowpath_irq_req(struct qed_hwfn *hwfn) return rc; } +static void qed_slowpath_tasklet_flush(struct qed_hwfn *p_hwfn) +{ + /* Calling the disable function will make sure that any + * currently-running function is completed. The following call to the + * enable function makes this sequence a flush-like operation. + */ + if (p_hwfn->b_sp_dpc_enabled) { + tasklet_disable(p_hwfn->sp_dpc); + tasklet_enable(p_hwfn->sp_dpc); + } +} + void qed_slowpath_irq_sync(struct qed_hwfn *p_hwfn) { struct qed_dev *cdev = p_hwfn->cdev; @@ -617,6 +629,8 @@ void qed_slowpath_irq_sync(struct qed_hwfn *p_hwfn) synchronize_irq(cdev->int_params.msix_table[id].vector); else synchronize_irq(cdev->pdev->irq); + + qed_slowpath_tasklet_flush(p_hwfn); } static void qed_slowpath_irq_free(struct qed_dev *cdev) -- 2.20.1