From 064bff1c9f70ba495f83668a3ee2f10ea3f1c99c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 4 Jul 2012 13:50:00 +0000 Subject: [PATCH] net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer Signed-off-by: David S. Miller --- arch/m68k/include/asm/mcf8390.h | 129 +------- drivers/net/ethernet/8390/Kconfig | 14 + drivers/net/ethernet/8390/Makefile | 1 + drivers/net/ethernet/8390/mcf8390.c | 480 ++++++++++++++++++++++++++++ 4 files changed, 504 insertions(+), 120 deletions(-) create mode 100644 drivers/net/ethernet/8390/mcf8390.c diff --git a/arch/m68k/include/asm/mcf8390.h b/arch/m68k/include/asm/mcf8390.h index bf3d97baeae2..a72a20819a54 100644 --- a/arch/m68k/include/asm/mcf8390.h +++ b/arch/m68k/include/asm/mcf8390.h @@ -37,6 +37,7 @@ #if defined(CONFIG_ARN5206) #define NE2000_ADDR 0x40000300 #define NE2000_ODDOFFSET 0x00010000 +#define NE2000_ADDRSIZE 0x00020000 #define NE2000_IRQ_VECTOR 0xf0 #define NE2000_IRQ_PRIORITY 2 #define NE2000_IRQ_LEVEL 4 @@ -46,6 +47,7 @@ #if defined(CONFIG_M5206eC3) #define NE2000_ADDR 0x40000300 #define NE2000_ODDOFFSET 0x00010000 +#define NE2000_ADDRSIZE 0x00020000 #define NE2000_IRQ_VECTOR 0x1c #define NE2000_IRQ_PRIORITY 2 #define NE2000_IRQ_LEVEL 4 @@ -54,6 +56,7 @@ #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) #define NE2000_ADDR 0x30000300 +#define NE2000_ADDRSIZE 0x00001000 #define NE2000_IRQ_VECTOR 25 #define NE2000_IRQ_PRIORITY 1 #define NE2000_IRQ_LEVEL 3 @@ -63,6 +66,7 @@ #if defined(CONFIG_M5307C3) #define NE2000_ADDR 0x40000300 #define NE2000_ODDOFFSET 0x00010000 +#define NE2000_ADDRSIZE 0x00020000 #define NE2000_IRQ_VECTOR 0x1b #define NE2000_BYTE volatile unsigned short #endif @@ -70,6 +74,7 @@ #if defined(CONFIG_M5272) && defined(CONFIG_NETtel) #define NE2000_ADDR 0x30600300 #define NE2000_ODDOFFSET 0x00008000 +#define NE2000_ADDRSIZE 0x00010000 #define NE2000_IRQ_VECTOR 67 #undef BSWAP #define BSWAP(w) (w) @@ -82,6 +87,7 @@ #define NE2000_ADDR0 0x30600300 #define NE2000_ADDR1 0x30800300 #define NE2000_ODDOFFSET 0x00008000 +#define NE2000_ADDRSIZE 0x00010000 #define NE2000_IRQ_VECTOR0 27 #define NE2000_IRQ_VECTOR1 29 #undef BSWAP @@ -94,6 +100,7 @@ #if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) #define NE2000_ADDR 0x30600300 #define NE2000_ODDOFFSET 0x00008000 +#define NE2000_ADDRSIZE 0x00010000 #define NE2000_IRQ_VECTOR 27 #undef BSWAP #define BSWAP(w) (w) @@ -105,6 +112,7 @@ #if defined(CONFIG_ARN5307) #define NE2000_ADDR 0xfe600300 #define NE2000_ODDOFFSET 0x00010000 +#define NE2000_ADDRSIZE 0x00020000 #define NE2000_IRQ_VECTOR 0x1b #define NE2000_IRQ_PRIORITY 2 #define NE2000_IRQ_LEVEL 3 @@ -114,129 +122,10 @@ #if defined(CONFIG_M5407C3) #define NE2000_ADDR 0x40000300 #define NE2000_ODDOFFSET 0x00010000 +#define NE2000_ADDRSIZE 0x00020000 #define NE2000_IRQ_VECTOR 0x1b #define NE2000_BYTE volatile unsigned short #endif -/****************************************************************************/ - -/* - * Side-band address space for odd address requires re-mapping - * many of the standard ISA access functions. - */ -#ifdef NE2000_ODDOFFSET - -#undef outb -#undef outb_p -#undef inb -#undef inb_p -#undef outsb -#undef outsw -#undef insb -#undef insw - -#define outb ne2000_outb -#define inb ne2000_inb -#define outb_p ne2000_outb -#define inb_p ne2000_inb -#define outsb ne2000_outsb -#define outsw ne2000_outsw -#define insb ne2000_insb -#define insw ne2000_insw - - -#ifndef COLDFIRE_NE2000_FUNCS - -void ne2000_outb(unsigned int val, unsigned int addr); -int ne2000_inb(unsigned int addr); -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); - -#else - -/* - * This macro converts a conventional register address into the - * real memory pointer of the mapped NE2000 device. - * On most NE2000 implementations on ColdFire boards the chip is - * mapped in kinda funny, due to its ISA heritage. - */ -#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) -#define NE2000_DATA_PTR(addr) (addr) - - -void ne2000_outb(unsigned int val, unsigned int addr) -{ - NE2000_BYTE *rp; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - *rp = RSWAP(val); -} - -int ne2000_inb(unsigned int addr) -{ - NE2000_BYTE *rp, val; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - val = *rp; - return((int) ((NE2000_BYTE) RSWAP(val))); -} - -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *rp; - *buf++ = RSWAP(val); - } -} - -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *rp; - *buf++ = BSWAP(w); - } -} - -void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *buf++; - *rp = RSWAP(val); - } -} - -void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *buf++; - *rp = BSWAP(w); - } -} - -#endif /* COLDFIRE_NE2000_FUNCS */ -#endif /* NE2000_OFFOFFSET */ - /****************************************************************************/ #endif /* mcf8390_h */ diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 2e538676924d..e1219e037c04 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -162,6 +162,20 @@ config MAC8390 and read the Ethernet-HOWTO, available from . +config MCF8390 + tristate "ColdFire NS8390 based Ethernet support" + depends on COLDFIRE + select CRC32 + ---help--- + This driver is for Ethernet devices using an NS8390-compatible + chipset on many common ColdFire CPU based boards. Many of the older + Freescale dev boards use this, and some other common boards like + some SnapGear routers do as well. + + If you have one of these boards and want to use the network interface + on them then choose Y. To compile this driver as a module, choose M + here, the module will be called mcf8390. + config NE2000 tristate "NE2000/NE1000 support" depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index d13790b7fd27..f43038babf86 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o obj-$(CONFIG_HYDRA) += hydra.o 8390.o obj-$(CONFIG_LNE390) += lne390.o 8390.o +obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c new file mode 100644 index 000000000000..230efd6fa5d5 --- /dev/null +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -0,0 +1,480 @@ +/* + * Support for ColdFire CPU based boards using a NS8390 Ethernet device. + * + * Derived from the many other 8390 drivers. + * + * (C) Copyright 2012, Greg Ungerer + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of the Linux + * distribution for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const char version[] = + "mcf8390.c: (15-06-2012) Greg Ungerer "; + +#define NE_CMD 0x00 +#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset */ +#define NE_RESET 0x1f /* Issue a read to reset ,a write to clear */ +#define NE_EN0_ISR 0x07 +#define NE_EN0_DCFG 0x0e +#define NE_EN0_RSARLO 0x08 +#define NE_EN0_RSARHI 0x09 +#define NE_EN0_RCNTLO 0x0a +#define NE_EN0_RXCR 0x0c +#define NE_EN0_TXCR 0x0d +#define NE_EN0_RCNTHI 0x0b +#define NE_EN0_IMR 0x0f + +#define NESM_START_PG 0x40 /* First page of TX buffer */ +#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ + +#ifdef NE2000_ODDOFFSET +/* + * A lot of the ColdFire boards use a separate address region for odd offset + * register addresses. The following functions convert and map as required. + * Note that the data port accesses are treated a little differently, and + * always accessed via the insX/outsX functions. + */ +static inline u32 NE_PTR(u32 addr) +{ + if (addr & 1) + return addr - 1 + NE2000_ODDOFFSET; + return addr; +} + +static inline u32 NE_DATA_PTR(u32 addr) +{ + return addr; +} + +void ei_outb(u32 val, u32 addr) +{ + NE2000_BYTE *rp; + + rp = (NE2000_BYTE *) NE_PTR(addr); + *rp = RSWAP(val); +} + +#define ei_inb ei_inb +u8 ei_inb(u32 addr) +{ + NE2000_BYTE *rp, val; + + rp = (NE2000_BYTE *) NE_PTR(addr); + val = *rp; + return (u8) (RSWAP(val) & 0xff); +} + +void ei_insb(u32 addr, void *vbuf, int len) +{ + NE2000_BYTE *rp, val; + u8 *buf; + + buf = (u8 *) vbuf; + rp = (NE2000_BYTE *) NE_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *rp; + *buf++ = RSWAP(val); + } +} + +void ei_insw(u32 addr, void *vbuf, int len) +{ + volatile u16 *rp; + u16 w, *buf; + + buf = (u16 *) vbuf; + rp = (volatile u16 *) NE_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *rp; + *buf++ = BSWAP(w); + } +} + +void ei_outsb(u32 addr, const void *vbuf, int len) +{ + NE2000_BYTE *rp, val; + u8 *buf; + + buf = (u8 *) vbuf; + rp = (NE2000_BYTE *) NE_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *buf++; + *rp = RSWAP(val); + } +} + +void ei_outsw(u32 addr, const void *vbuf, int len) +{ + volatile u16 *rp; + u16 w, *buf; + + buf = (u16 *) vbuf; + rp = (volatile u16 *) NE_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *buf++; + *rp = BSWAP(w); + } +} + +#else /* !NE2000_ODDOFFSET */ + +#define ei_inb inb +#define ei_outb outb +#define ei_insb insb +#define ei_insw insw +#define ei_outsb outsb +#define ei_outsw outsw + +#endif /* !NE2000_ODDOFFSET */ + +#define ei_inb_p ei_inb +#define ei_outb_p ei_outb + +#include "lib8390.c" + +/* + * Hard reset the card. This used to pause for the same period that a + * 8390 reset command required, but that shouldn't be necessary. + */ +static void mcf8390_reset_8390(struct net_device *dev) +{ + unsigned long reset_start_time = jiffies; + u32 addr = dev->base_addr; + + if (ei_debug > 1) + netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); + + ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); + + ei_status.txing = 0; + ei_status.dmaing = 0; + + /* This check _should_not_ be necessary, omit eventually. */ + while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RESET) == 0) { + if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) { + netdev_warn(dev, "%s: did not complete\n", __func__); + break; + } + } + + ei_outb(ENISR_RESET, addr + NE_EN0_ISR); +} + +/* + * This *shouldn't* happen. + * If it does, it's the last thing you'll see + */ +static void mcf8390_dmaing_err(const char *func, struct net_device *dev, + struct ei_device *ei_local) +{ + netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + func, ei_local->dmaing, ei_local->irqlock); +} + +/* + * Grab the 8390 specific header. Similar to the block_input routine, but + * we don't need to be concerned with ring wrap as the header will be at + * the start of a page, so we optimize accordingly. + */ +static void mcf8390_get_8390_hdr(struct net_device *dev, + struct e8390_pkt_hdr *hdr, int ring_page) +{ + struct ei_device *ei_local = netdev_priv(dev); + u32 addr = dev->base_addr; + + if (ei_local->dmaing) { + mcf8390_dmaing_err(__func__, dev, ei_local); + return; + } + + ei_local->dmaing |= 0x01; + ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD); + ei_outb(ENISR_RDC, addr + NE_EN0_ISR); + ei_outb(sizeof(struct e8390_pkt_hdr), addr + NE_EN0_RCNTLO); + ei_outb(0, addr + NE_EN0_RCNTHI); + ei_outb(0, addr + NE_EN0_RSARLO); /* On page boundary */ + ei_outb(ring_page, addr + NE_EN0_RSARHI); + ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD); + + ei_insw(addr + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr) >> 1); + + outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ + ei_local->dmaing &= ~0x01; + + hdr->count = cpu_to_le16(hdr->count); +} + +/* + * Block input and output, similar to the Crynwr packet driver. + * If you are porting to a new ethercard, look at the packet driver source + * for hints. The NEx000 doesn't share the on-board packet memory -- + * you have to put the packet out through the "remote DMA" dataport + * using z_writeb. + */ +static void mcf8390_block_input(struct net_device *dev, int count, + struct sk_buff *skb, int ring_offset) +{ + struct ei_device *ei_local = netdev_priv(dev); + u32 addr = dev->base_addr; + char *buf = skb->data; + + if (ei_local->dmaing) { + mcf8390_dmaing_err(__func__, dev, ei_local); + return; + } + + ei_local->dmaing |= 0x01; + ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD); + ei_outb(ENISR_RDC, addr + NE_EN0_ISR); + ei_outb(count & 0xff, addr + NE_EN0_RCNTLO); + ei_outb(count >> 8, addr + NE_EN0_RCNTHI); + ei_outb(ring_offset & 0xff, addr + NE_EN0_RSARLO); + ei_outb(ring_offset >> 8, addr + NE_EN0_RSARHI); + ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD); + + ei_insw(addr + NE_DATAPORT, buf, count >> 1); + if (count & 1) + buf[count - 1] = ei_inb(addr + NE_DATAPORT); + + ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ + ei_local->dmaing &= ~0x01; +} + +static void mcf8390_block_output(struct net_device *dev, int count, + const unsigned char *buf, + const int start_page) +{ + struct ei_device *ei_local = netdev_priv(dev); + u32 addr = dev->base_addr; + unsigned long dma_start; + + /* Make sure we transfer all bytes if 16bit IO writes */ + if (count & 0x1) + count++; + + if (ei_local->dmaing) { + mcf8390_dmaing_err(__func__, dev, ei_local); + return; + } + + ei_local->dmaing |= 0x01; + /* We should already be in page 0, but to be safe... */ + ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, addr + NE_CMD); + + ei_outb(ENISR_RDC, addr + NE_EN0_ISR); + + /* Now the normal output. */ + ei_outb(count & 0xff, addr + NE_EN0_RCNTLO); + ei_outb(count >> 8, addr + NE_EN0_RCNTHI); + ei_outb(0x00, addr + NE_EN0_RSARLO); + ei_outb(start_page, addr + NE_EN0_RSARHI); + ei_outb(E8390_RWRITE + E8390_START, addr + NE_CMD); + + ei_outsw(addr + NE_DATAPORT, buf, count >> 1); + + dma_start = jiffies; + while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { + if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ + netdev_err(dev, "timeout waiting for Tx RDC\n"); + mcf8390_reset_8390(dev); + __NS8390_init(dev, 1); + break; + } + } + + ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ + ei_local->dmaing &= ~0x01; +} + +static const struct net_device_ops mcf8390_netdev_ops = { + .ndo_open = __ei_open, + .ndo_stop = __ei_close, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_rx_mode = __ei_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = __ei_poll, +#endif +}; + +static int mcf8390_init(struct net_device *dev) +{ + static u32 offsets[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + }; + struct ei_device *ei_local = netdev_priv(dev); + unsigned char SA_prom[32]; + u32 addr = dev->base_addr; + int start_page, stop_page; + int i, ret; + + mcf8390_reset_8390(dev); + + /* + * Read the 16 bytes of station address PROM. + * We must first initialize registers, + * similar to NS8390_init(eifdev, 0). + * We can't reliably read the SAPROM address without this. + * (I learned the hard way!). + */ + { + static const struct { + u32 value; + u32 offset; + } program_seq[] = { + {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD}, + /* Select page 0 */ + {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */ + {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */ + {0x00, NE_EN0_RCNTHI}, + {0x00, NE_EN0_IMR}, /* Mask completion irq */ + {0xFF, NE_EN0_ISR}, + {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */ + {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */ + {32, NE_EN0_RCNTLO}, + {0x00, NE_EN0_RCNTHI}, + {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */ + {0x00, NE_EN0_RSARHI}, + {E8390_RREAD + E8390_START, NE_CMD}, + }; + for (i = 0; i < ARRAY_SIZE(program_seq); i++) { + ei_outb(program_seq[i].value, + addr + program_seq[i].offset); + } + } + + for (i = 0; i < 16; i++) { + SA_prom[i] = ei_inb(addr + NE_DATAPORT); + ei_inb(addr + NE_DATAPORT); + } + + /* We must set the 8390 for word mode. */ + ei_outb(0x49, addr + NE_EN0_DCFG); + start_page = NESM_START_PG; + stop_page = NESM_STOP_PG; + + /* Install the Interrupt handler */ + ret = request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev); + if (ret) + return ret; + + for (i = 0; i < ETH_ALEN; i++) + dev->dev_addr[i] = SA_prom[i]; + + netdev_dbg(dev, "Found ethernet address: %pM\n", dev->dev_addr); + + ei_local->name = "mcf8390"; + ei_local->tx_start_page = start_page; + ei_local->stop_page = stop_page; + ei_local->word16 = 1; + ei_local->rx_start_page = start_page + TX_PAGES; + ei_local->reset_8390 = mcf8390_reset_8390; + ei_local->block_input = mcf8390_block_input; + ei_local->block_output = mcf8390_block_output; + ei_local->get_8390_hdr = mcf8390_get_8390_hdr; + ei_local->reg_offset = offsets; + + dev->netdev_ops = &mcf8390_netdev_ops; + __NS8390_init(dev, 0); + ret = register_netdev(dev); + if (ret) { + free_irq(dev->irq, dev); + return ret; + } + + netdev_info(dev, "addr=0x%08x irq=%d, Ethernet Address %pM\n", + addr, dev->irq, dev->dev_addr); + return 0; +} + +static int mcf8390_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct ei_device *ei_local; + struct resource *mem, *irq; + resource_size_t msize; + int ret; + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (irq == NULL) { + dev_err(&pdev->dev, "no IRQ specified?\n"); + return -ENXIO; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem == NULL) { + dev_err(&pdev->dev, "no memory address specified?\n"); + return -ENXIO; + } + msize = resource_size(mem); + if (!request_mem_region(mem->start, msize, pdev->name)) + return -EBUSY; + + dev = ____alloc_ei_netdev(0); + if (dev == NULL) { + release_mem_region(mem->start, msize); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); + ei_local = netdev_priv(dev); + + dev->irq = irq->start; + dev->base_addr = mem->start; + + ret = mcf8390_init(dev); + if (ret) { + release_mem_region(mem->start, msize); + free_netdev(dev); + return ret; + } + return 0; +} + +static int mcf8390_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct resource *mem; + + unregister_netdev(dev); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem) + release_mem_region(mem->start, resource_size(mem)); + free_netdev(dev); + return 0; +} + +static struct platform_driver mcf8390_drv = { + .driver = { + .name = "mcf8390", + .owner = THIS_MODULE, + }, + .probe = mcf8390_probe, + .remove = mcf8390_remove, +}; + +module_platform_driver(mcf8390_drv); + +MODULE_DESCRIPTION("MCF8390 ColdFire NS8390 driver"); +MODULE_AUTHOR("Greg Ungerer "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mcf8390"); -- 2.20.1