From 049c6b4e8f85d9ef5f26c8a974e5e9fb084f8ce0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 14 Sep 2012 16:30:23 -0700 Subject: [PATCH] USB: serial: keyspan: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the keyspan driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 290 ++++++++++++++++++----------------- drivers/usb/serial/keyspan.h | 17 +- 2 files changed, 159 insertions(+), 148 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index f0d4f3fcf4f7..0d37581fabb1 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -165,7 +165,7 @@ static void keyspan_set_termios(struct tty_struct *tty, so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, don't change */ - if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ /* FIXME - calcuate exact rate from divisor ? */ @@ -241,8 +241,8 @@ static int keyspan_write(struct tty_struct *tty, dataOffset = 1; } - dbg("%s - for port %d (%d chars), flip=%d", - __func__, port->number, count, p_priv->out_flip); + dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n", + __func__, port->number, count, p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -255,11 +255,11 @@ static int keyspan_write(struct tty_struct *tty, this_urb = p_priv->out_urbs[flip]; if (this_urb == NULL) { /* no bulk out, so return 0 bytes written */ - dbg("%s - no output urb :(", __func__); + dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); return count; } - dbg("%s - endpoint %d flip %d", + dev_dbg(&port->dev, "%s - endpoint %d flip %d\n", __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { @@ -282,7 +282,7 @@ static int keyspan_write(struct tty_struct *tty, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("usb_submit_urb(write bulk) failed (%d)", err); + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); p_priv->tx_start_time[flip] = jiffies; /* Flip for next time if usa26 or usa28 interface @@ -305,8 +305,8 @@ static void usa26_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, endpoint); + dev_dbg(&urb->dev->dev,"%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -325,7 +325,7 @@ static void usa26_indat_callback(struct urb *urb) tty_insert_flip_char(tty, data[i], err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -345,7 +345,7 @@ static void usa26_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* Outdat handling is common for all devices */ @@ -356,7 +356,7 @@ static void usa2x_outdat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); usb_serial_port_softint(port); } @@ -374,7 +374,7 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -394,20 +394,22 @@ static void usa26_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != 9) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } msg = (struct keyspan_usa26_portStatusMessage *)data; #if 0 - dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, - msg->_txXoff, msg->rxEnabled, msg->controlResponse); + dev_dbg(&urb->dev->dev, + "%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", + __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, + msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, + msg->controlResponse); #endif /* Now do something useful with the data */ @@ -415,7 +417,7 @@ static void usa26_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -438,7 +440,7 @@ static void usa26_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -465,8 +467,8 @@ static void usa28_indat_callback(struct urb *urb) do { if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, usb_pipeendpoint(urb->pipe)); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, usb_pipeendpoint(urb->pipe)); return; } @@ -484,7 +486,7 @@ static void usa28_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); p_priv->in_flip ^= 1; @@ -505,7 +507,7 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -526,25 +528,28 @@ static void usa28_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10], data[11]);*/ + /* + dev_dbg(&urb->dev->dev, + "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, + data[0], data[1], data[2], data[3], data[4], data[5], + data[6], data[7], data[8], data[9], data[10], data[11]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa28_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -567,7 +572,7 @@ static void usa28_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -589,7 +594,7 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -613,27 +618,29 @@ static void usa49_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10]);*/ + /* + dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x", + __func__, data[0], data[1], data[2], data[3], data[4], + data[5], data[6], data[7], data[8], data[9], data[10]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg("%s - Unexpected port number %d", - __func__, msg->portNumber); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; @@ -656,7 +663,7 @@ static void usa49_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -676,8 +683,8 @@ static void usa49_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", __func__, - status, endpoint); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -710,7 +717,7 @@ static void usa49_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa49wg_indat_callback(struct urb *urb) @@ -725,7 +732,7 @@ static void usa49wg_indat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } @@ -738,7 +745,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { - dbg("%s - Unexpected port number %d", + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, data[i]); return; } @@ -778,7 +785,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* not used, usa-49 doesn't have per-port control endpoints */ @@ -799,7 +806,7 @@ static void usa90_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", __func__, status, endpoint); return; } @@ -828,7 +835,7 @@ static void usa90_indat_callback(struct urb *urb) err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -850,7 +857,7 @@ static void usa90_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } @@ -868,11 +875,11 @@ static void usa90_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length < 14) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } @@ -900,7 +907,7 @@ static void usa90_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -914,7 +921,7 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -935,13 +942,13 @@ static void usa67_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); return; } @@ -951,7 +958,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); return; } @@ -973,7 +980,7 @@ static void usa67_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa67_glocont_callback(struct urb *urb) @@ -989,7 +996,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1068,8 +1075,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(urb->dev, urb->pipe); err = usb_submit_urb(urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit urb %d failed (%d)", - __func__, i, err); + dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); } /* Reset low level data toggle on out endpoints */ @@ -1092,7 +1098,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, leave as default */ if (baud_rate >= 0 - && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { p_priv->baud = baud_rate; } @@ -1142,7 +1148,7 @@ static void keyspan_close(struct usb_serial_port *port) } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dbg("%s - urb in progress", __func__); + dev_dbg(&port->dev, "%s - urb in progress\n", __func__); }*/ p_priv->out_flip = 0; @@ -1167,13 +1173,13 @@ static int keyspan_fake_startup(struct usb_serial *serial) char *fw_name; const struct firmware *fw; - dbg("Keyspan startup version %04x product %04x", - le16_to_cpu(serial->dev->descriptor.bcdDevice), - le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", + le16_to_cpu(serial->dev->descriptor.bcdDevice), + le16_to_cpu(serial->dev->descriptor.idProduct)); if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) != 0x8000) { - dbg("Firmware already loaded. Quitting."); + dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); return 1; } @@ -1238,7 +1244,7 @@ static int keyspan_fake_startup(struct usb_serial *serial) return 1; } - dbg("Uploading Keyspan %s firmware.", fw_name); + dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); /* download the firmware image */ response = ezusb_set_reset(serial->dev, 1); @@ -1296,10 +1302,10 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg("%s - alloc for endpoint %d.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s - alloc for endpoint %d failed.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint); return NULL; } @@ -1332,7 +1338,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, return NULL; } - dbg("%s - using urb %p for %s endpoint %x", + dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", __func__, urb, ep_type_name, endpoint); return urb; } @@ -1464,14 +1470,15 @@ static void keyspan_setup_urbs(struct usb_serial *serial) } /* usa19 function doesn't require prescaler */ -static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1498,19 +1505,20 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } /* usa19hs function doesn't require prescaler */ -static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div; /* divisor */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1533,13 +1541,14 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } -static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ @@ -1551,7 +1560,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 best_prescaler; int i; - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1596,20 +1605,21 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (prescaler) { *prescaler = best_prescaler; - /* dbg("%s - %d %d", __func__, *prescaler, div); */ + /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ } return KEYSPAN_BAUD_RATE_OK; } /* USA-28 supports different maximum baud rates on each port */ -static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1642,7 +1652,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_low = (u8) (cnt & 0xff); if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); - dbg("%s - %d OK.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); return KEYSPAN_BAUD_RATE_OK; } @@ -1658,7 +1668,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg("%s reset=%d", __func__, reset_port); + dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1668,11 +1678,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; - dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1681,7 +1691,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1692,11 +1702,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -1790,12 +1800,12 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -1821,7 +1831,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1830,7 +1840,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -1838,9 +1848,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); msg.setBaudRate = 1; - if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, - &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate requested %d.", + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, NULL, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ @@ -1915,10 +1926,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed", __func__); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); #if 0 else { - dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__, this_urb->transfer_buffer_length); } #endif @@ -1949,13 +1960,13 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, port->number); + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } - dbg("%s - endpoint %d port %d (%d)", - __func__, usb_pipeendpoint(this_urb->pipe), - port->number, device_port); + dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), + port->number, device_port); /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ @@ -1963,7 +1974,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1977,11 +1988,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2100,12 +2111,12 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, } err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__, + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -2131,7 +2142,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -2140,7 +2151,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -2151,13 +2162,12 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0x01; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); p_priv->baud = 9600; - d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, + d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0); } msg.setRxMode = 1; @@ -2239,7 +2249,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2265,7 +2275,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } @@ -2275,7 +2285,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -2288,11 +2298,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2383,8 +2393,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, - err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2440,8 +2449,7 @@ static int keyspan_startup(struct usb_serial *serial) /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", - __func__); + dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__); return -ENOMEM; } @@ -2454,7 +2462,7 @@ static int keyspan_startup(struct usb_serial *serial) p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); if (!p_priv) { - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); + dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i); return 1; } p_priv->device_details = d_details; @@ -2466,13 +2474,13 @@ static int keyspan_startup(struct usb_serial *serial) if (s_priv->instat_urb != NULL) { err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit instat urb failed %d", __func__, + dev_dbg(&port->dev, "%s - submit instat urb failed %d\n", __func__, err); } if (s_priv->indat_urb != NULL) { err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit indat urb failed %d", __func__, + dev_dbg(&port->dev, "%s - submit indat urb failed %d\n", __func__, err); } @@ -2527,10 +2535,8 @@ static void keyspan_release(struct usb_serial *serial) s_priv = usb_get_serial_data(serial); - /* dbg("Freeing serial->private."); */ kfree(s_priv); - /* dbg("Freeing port->private."); */ /* Now free per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index fe1c5d91692c..0a8a40b5711e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -64,19 +64,23 @@ static int keyspan_tiocmset (struct tty_struct *tty, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); -static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa28_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); @@ -188,8 +192,9 @@ struct keyspan_device_details { /* Endpoint used for global control functions */ int glocont_endpoint; - int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); + int (*calculate_baud_rate) (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); u32 baudclk; }; -- 2.20.1