From 02f1175c8737802b5609aa2c0b1fb3ca2c23069f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:39:28 -0800 Subject: [PATCH] [PATCH] Char: cyclades, Lindent the code make the code indented by tabs. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 7750 ++++++++++++++++++++------------------- 1 file changed, 3942 insertions(+), 3808 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index dd8223dc9086..31bc8e41587e 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1,8 +1,7 @@ #undef BLOCKMOVE #define Z_WAKE #undef Z_EXT_CHARS_IN_BUFFER -static char rcsid[] = -"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $"; +static char rcsid[] = "$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $"; /* * linux/drivers/char/cyclades.c @@ -597,14 +596,14 @@ static char rcsid[] = in the definition below. No other change is necessary to support up to eight boards. Beyond that you'll have to extend cy_isa_addresses. */ -#define NR_CARDS 4 +#define NR_CARDS 4 /* If the total number of ports is larger than NR_PORTS, change this constant in the definition below. No other change is necessary to support more boards/ports. */ -#define NR_PORTS 256 +#define NR_PORTS 256 #define ZE_V1_NPORTS 64 #define ZO_V1 0 @@ -663,7 +662,7 @@ static char rcsid[] = do { \ spin_lock_irqsave(&cy_card[info->card].card_lock, flags); \ } while (0) - + #define CY_UNLOCK(info,flags) \ do { \ spin_unlock_irqrestore(&cy_card[info->card].card_lock, flags); \ @@ -676,14 +675,14 @@ static char rcsid[] = #include #include -static void cy_throttle (struct tty_struct *tty); -static void cy_send_xchar (struct tty_struct *tty, char ch); +static void cy_throttle(struct tty_struct *tty); +static void cy_send_xchar(struct tty_struct *tty, char ch); #define IS_CYC_Z(card) ((card).num_chips == -1) #define Z_FPGA_CHECK(card) \ - ((cy_readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) + ((cy_readl(&((struct RUNTIME_9060 __iomem *) \ + ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) #define ISZLOADED(card) (((ZO_V1==cy_readl(&((struct RUNTIME_9060 __iomem *) \ ((card).ctl_addr))->mail_box_0)) || \ @@ -713,27 +712,28 @@ static struct tty_driver *cy_serial_driver; */ static unsigned int cy_isa_addresses[] = { - 0xD0000, - 0xD2000, - 0xD4000, - 0xD6000, - 0xD8000, - 0xDA000, - 0xDC000, - 0xDE000, - 0,0,0,0,0,0,0,0 + 0xD0000, + 0xD2000, + 0xD4000, + 0xD6000, + 0xD8000, + 0xDA000, + 0xDC000, + 0xDE000, + 0, 0, 0, 0, 0, 0, 0, 0 }; + #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) #ifdef MODULE static long maddr[NR_CARDS] = { 0, }; -static int irq[NR_CARDS] = { 0, }; +static int irq[NR_CARDS] = { 0, }; module_param_array(maddr, long, NULL, 0); module_param_array(irq, int, NULL, 0); #endif -#endif /* CONFIG_ISA */ +#endif /* CONFIG_ISA */ /* This is the per-card data structure containing address, irq, number of channels, etc. This driver supports a maximum of NR_CARDS cards. @@ -745,7 +745,7 @@ static struct cyclades_card cy_card[NR_CARDS]; */ static struct cyclades_port cy_port[NR_PORTS]; -static int cy_next_channel; /* next minor available */ +static int cy_next_channel; /* next minor available */ /* * This is used to look up the divisor speeds and the timeouts @@ -757,36 +757,42 @@ static int cy_next_channel; /* next minor available */ * 20 */ static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, - 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000, - 230400, 0}; - -static char baud_co_25[] = { /* 25 MHz clock option table */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, - 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; - -static char baud_bpr_25[] = { /* 25 MHz baud rate period table */ - 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, - 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15}; - -static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, - 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00}; - -static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ - 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, - 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, - 0x21}; - -static char baud_cor3[] = { /* receive threshold */ - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, - 0x07}; + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, + 230400, 0 +}; + +static char baud_co_25[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static char baud_bpr_25[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 +}; + +static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, + 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 +}; + +static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ + 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, + 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, + 0x21 +}; + +static char baud_cor3[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x07 +}; /* * The Cyclades driver implements HW flow control as any serial driver. @@ -799,42 +805,42 @@ static char baud_cor3[] = { /* receive threshold */ * cables. */ -static char rflow_thr[] = { /* rflow threshold */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a}; +static char rflow_thr[] = { /* rflow threshold */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a +}; /* The Cyclom-Ye has placed the sequential chips in non-sequential * address order. This look-up table overcomes that problem. */ -static int cy_chip_offset [] = - { 0x0000, - 0x0400, - 0x0800, - 0x0C00, - 0x0200, - 0x0600, - 0x0A00, - 0x0E00 - }; +static int cy_chip_offset[] = { 0x0000, + 0x0400, + 0x0800, + 0x0C00, + 0x0200, + 0x0600, + 0x0A00, + 0x0E00 +}; /* PCI related definitions */ -static unsigned short cy_pci_nboard; -static unsigned short cy_isa_nboard; -static unsigned short cy_nboard; +static unsigned short cy_pci_nboard; +static unsigned short cy_isa_nboard; +static unsigned short cy_nboard; #ifdef CONFIG_PCI -static unsigned short cy_pci_dev_id[] = { - PCI_DEVICE_ID_CYCLOM_Y_Lo, /* PCI < 1Mb */ - PCI_DEVICE_ID_CYCLOM_Y_Hi, /* PCI > 1Mb */ - PCI_DEVICE_ID_CYCLOM_4Y_Lo, /* 4Y PCI < 1Mb */ - PCI_DEVICE_ID_CYCLOM_4Y_Hi, /* 4Y PCI > 1Mb */ - PCI_DEVICE_ID_CYCLOM_8Y_Lo, /* 8Y PCI < 1Mb */ - PCI_DEVICE_ID_CYCLOM_8Y_Hi, /* 8Y PCI > 1Mb */ - PCI_DEVICE_ID_CYCLOM_Z_Lo, /* Z PCI < 1Mb */ - PCI_DEVICE_ID_CYCLOM_Z_Hi, /* Z PCI > 1Mb */ - 0 /* end of table */ - }; +static unsigned short cy_pci_dev_id[] = { + PCI_DEVICE_ID_CYCLOM_Y_Lo, /* PCI < 1Mb */ + PCI_DEVICE_ID_CYCLOM_Y_Hi, /* PCI > 1Mb */ + PCI_DEVICE_ID_CYCLOM_4Y_Lo, /* 4Y PCI < 1Mb */ + PCI_DEVICE_ID_CYCLOM_4Y_Hi, /* 4Y PCI > 1Mb */ + PCI_DEVICE_ID_CYCLOM_8Y_Lo, /* 8Y PCI < 1Mb */ + PCI_DEVICE_ID_CYCLOM_8Y_Hi, /* 8Y PCI > 1Mb */ + PCI_DEVICE_ID_CYCLOM_Z_Lo, /* Z PCI < 1Mb */ + PCI_DEVICE_ID_CYCLOM_Z_Hi, /* Z PCI > 1Mb */ + 0 /* end of table */ +}; #endif static void cy_start(struct tty_struct *); @@ -842,9 +848,9 @@ static void set_line_char(struct cyclades_port *); static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong); #ifdef CONFIG_ISA static unsigned detect_isa_irq(void __iomem *); -#endif /* CONFIG_ISA */ +#endif /* CONFIG_ISA */ -static int cyclades_get_proc_info(char *, char **, off_t , int , int *, void *); +static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *); #ifndef CONFIG_CYZ_INTR static void cyz_poll(unsigned long); @@ -855,41 +861,40 @@ static long cyz_polling_cycle = CZ_DEF_POLL; static int cyz_timeron = 0; static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); -#else /* CONFIG_CYZ_INTR */ +#else /* CONFIG_CYZ_INTR */ static void cyz_rx_restart(unsigned long); static struct timer_list cyz_rx_full_timer[NR_PORTS]; -#endif /* CONFIG_CYZ_INTR */ +#endif /* CONFIG_CYZ_INTR */ -static inline int -serial_paranoia_check(struct cyclades_port *info, - char *name, const char *routine) +static inline int serial_paranoia_check(struct cyclades_port *info, + char *name, const char *routine) { #ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "cyc Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "cyc Warning: null cyclades_port for (%s) in %s\n"; - static const char *badrange = - "cyc Warning: cyclades_port out of range for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - - if( (long)info < (long)(&cy_port[0]) - || (long)(&cy_port[NR_PORTS]) < (long)info ){ - printk(badrange, name, routine); - return 1; - } - - if (info->magic != CYCLADES_MAGIC) { - printk(badmagic, name, routine); - return 1; - } + static const char *badmagic = + "cyc Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "cyc Warning: null cyclades_port for (%s) in %s\n"; + static const char *badrange = + "cyc Warning: cyclades_port out of range for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + + if ((long)info < (long)(&cy_port[0]) || + (long)(&cy_port[NR_PORTS]) < (long)info) { + printk(badrange, name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk(badmagic, name, routine); + return 1; + } #endif - return 0; -} /* serial_paranoia_check */ + return 0; +} /* serial_paranoia_check */ /* * This routine is used by the interrupt handler to schedule @@ -897,13 +902,11 @@ serial_paranoia_check(struct cyclades_port *info, * (also known as the "bottom half"). This can be called any * number of times for any channel without harm. */ -static inline void -cy_sched_event(struct cyclades_port *info, int event) +static inline void cy_sched_event(struct cyclades_port *info, int event) { - info->event |= 1 << event; /* remember what kind of event and who */ - schedule_work(&info->tqueue); -} /* cy_sched_event */ - + info->event |= 1 << event; /* remember what kind of event and who */ + schedule_work(&info->tqueue); +} /* cy_sched_event */ /* * This routine is used to handle the "bottom half" processing for the @@ -930,41 +933,36 @@ do_softint(struct work_struct *work) { struct cyclades_port *info = container_of(work, struct cyclades_port, tqueue); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; + } + if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) + wake_up_interruptible(&info->open_wait); #ifdef CONFIG_CYZ_INTR - if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event)) { - if (cyz_rx_full_timer[info->line].function == NULL) { - cyz_rx_full_timer[info->line].expires = jiffies + 1; - cyz_rx_full_timer[info->line].function = cyz_rx_restart; - cyz_rx_full_timer[info->line].data = (unsigned long)info; - add_timer(&cyz_rx_full_timer[info->line]); + if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event)) { + if (cyz_rx_full_timer[info->line].function == NULL) { + cyz_rx_full_timer[info->line].expires = jiffies + 1; + cyz_rx_full_timer[info->line].function = cyz_rx_restart; + cyz_rx_full_timer[info->line].data = + (unsigned long)info; + add_timer(&cyz_rx_full_timer[info->line]); + } } - } #endif - if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) { - wake_up_interruptible(&info->delta_msr_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - wake_up_interruptible(&tty->write_wait); - } + if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) + wake_up_interruptible(&info->delta_msr_wait); + tty_wakeup(tty); #ifdef Z_WAKE - if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->shutdown_wait); - } + if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) + wake_up_interruptible(&info->shutdown_wait); #endif } /* do_softint */ @@ -979,82 +977,81 @@ do_softint(struct work_struct *work) This function is only called from inside spinlock-protected code. */ -static int -cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index) +static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) { - volatile int i; + volatile int i; - /* Check to see that the previous command has completed */ - for(i = 0 ; i < 100 ; i++){ - if (cy_readb(base_addr+(CyCCR< 0)? irq : 0; + int irq; + unsigned long irqs, flags; + int save_xir, save_car; + int index = 0; /* IRQ probing is only for ISA */ + + /* forget possible initially masked and pending IRQ */ + irq = probe_irq_off(probe_irq_on()); + + /* Clear interrupts on the board first */ + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + irqs = probe_irq_on(); + /* Wait ... */ + udelay(5000L); + + /* Enable the Tx interrupts on the CD1400 */ + local_irq_save(flags); + cy_writeb(address + (CyCAR << index), 0); + cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); + + cy_writeb(address + (CyCAR << index), 0); + cy_writeb(address + (CySRER << index), + cy_readb(address + (CySRER << index)) | CyTxRdy); + local_irq_restore(flags); + + /* Wait ... */ + udelay(5000L); + + /* Check which interrupt is in use */ + irq = probe_irq_off(irqs); + + /* Clean up */ + save_xir = (u_char) cy_readb(address + (CyTIR << index)); + save_car = cy_readb(address + (CyCAR << index)); + cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); + cy_writeb(address + (CySRER << index), + cy_readb(address + (CySRER << index)) & ~CyTxRdy); + cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); + cy_writeb(address + (CyCAR << index), (save_car)); + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + return (irq > 0) ? irq : 0; } -#endif /* CONFIG_ISA */ +#endif /* CONFIG_ISA */ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, - void __iomem *base_addr, int status, int index) + void __iomem * base_addr, int status, int index) { struct cyclades_port *info; struct tty_struct *tty; @@ -1063,328 +1060,378 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, int save_xir, channel, save_car; char data; - if (status & CySRReceive) { /* reception interrupt */ + if (status & CySRReceive) { /* reception interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip); + printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip); #endif - /* determine the channel & change to that context */ - spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr+(CyRIR<first_line; - info = &cy_port[i]; - info->last_active = jiffies; - save_car = cy_readb(base_addr+(CyCAR<tty == 0){ - j = (cy_readb(base_addr+(CyRIVR<tty; - j = (cy_readb(base_addr+(CyRIVR<icount.brk++; - else if(data & CyFRAME) - info->icount.frame++; - else if(data & CyPARITY) - info->icount.parity++; - else if(data & CyOVERRUN) - info->icount.overrun++; - - if(data & info->ignore_status_mask){ - info->icount.rx++; - return; - } - if (tty_buffer_request_room(tty, 1)) { - if (data & info->read_status_mask){ - if(data & CyBREAK){ - tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<icount.rx++; - if (info->flags & ASYNC_SAK){ - do_SAK(tty); + /* determine the channel & change to that context */ + spin_lock(&cinfo->card_lock); + save_xir = (u_char) cy_readb(base_addr + (CyRIR << index)); + channel = (u_short) (save_xir & CyIRChannel); + i = channel + chip * 4 + cinfo->first_line; + info = &cy_port[i]; + info->last_active = jiffies; + save_car = cy_readb(base_addr + (CyCAR << index)); + cy_writeb(base_addr + (CyCAR << index), save_xir); + + /* if there is nowhere to put the data, discard it */ + if (info->tty == 0) { + j = (cy_readb(base_addr + (CyRIVR << index)) & + CyIVRMask); + if (j == CyIVRRxEx) { /* exception */ + data = cy_readb(base_addr + (CyRDSR << index)); + } else { /* normal character reception */ + char_count = cy_readb(base_addr + + (CyRDCR << index)); + while (char_count--) { + data = cy_readb(base_addr + + (CyRDSR << index)); } - }else if(data & CyFRAME){ - tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<icount.rx++; - info->idle_stats.frame_errs++; - }else if(data & CyPARITY){ - /* Pieces of seven... */ - tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<icount.rx++; - info->idle_stats.parity_errs++; - }else if(data & CyOVERRUN){ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - info->icount.rx++; - /* If the flip buffer itself is - overflowing, we still lose - the next incoming character. - */ - tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<icount.rx++; - info->idle_stats.overruns++; - /* These two conditions may imply */ - /* a normal read should be done. */ - /* }else if(data & CyTIMEOUT){ */ - /* }else if(data & CySPECHAR){ */ - }else { - tty_insert_flip_char(tty, 0, TTY_NORMAL); - info->icount.rx++; - } - }else{ - tty_insert_flip_char(tty, 0, TTY_NORMAL); - info->icount.rx++; } - }else{ - /* there was a software buffer - overrun and nothing could be - done about it!!! */ - info->icount.buf_overrun++; - info->idle_stats.overruns++; - } - } else { /* normal character reception */ - /* load # chars available from the chip */ - char_count = cy_readb(base_addr+(CyRDCR<tty; + j = (cy_readb(base_addr + (CyRIVR << index)) & + CyIVRMask); + if (j == CyIVRRxEx) { /* exception */ + data = cy_readb(base_addr + (CyRDSR << index)); + + /* For statistics only */ + if (data & CyBREAK) + info->icount.brk++; + else if (data & CyFRAME) + info->icount.frame++; + else if (data & CyPARITY) + info->icount.parity++; + else if (data & CyOVERRUN) + info->icount.overrun++; + + if (data & info->ignore_status_mask) { + info->icount.rx++; + return; + } + if (tty_buffer_request_room(tty, 1)) { + if (data & info->read_status_mask) { + if (data & CyBREAK) { + tty_insert_flip_char( + tty, + cy_readb( + base_addr + + (CyRDSR << + index)), + TTY_BREAK); + info->icount.rx++; + if (info->flags & + ASYNC_SAK) { + do_SAK(tty); + } + } else if (data & CyFRAME) { + tty_insert_flip_char( + tty, + cy_readb( + base_addr + + (CyRDSR << + index)), + TTY_FRAME); + info->icount.rx++; + info->idle_stats. + frame_errs++; + } else if (data & CyPARITY) { + /* Pieces of seven... */ + tty_insert_flip_char( + tty, + cy_readb( + base_addr + + (CyRDSR << + index)), + TTY_PARITY); + info->icount.rx++; + info->idle_stats. + parity_errs++; + } else if (data & CyOVERRUN) { + tty_insert_flip_char( + tty, 0, + TTY_OVERRUN); + info->icount.rx++; + /* If the flip buffer itself is + overflowing, we still lose + the next incoming character. + */ + tty_insert_flip_char( + tty, + cy_readb( + base_addr + + (CyRDSR << + index)), + TTY_FRAME); + info->icount.rx++; + info->idle_stats. + overruns++; + /* These two conditions may imply */ + /* a normal read should be done. */ + /* }else if(data & CyTIMEOUT){ */ + /* }else if(data & CySPECHAR){ */ + } else { + tty_insert_flip_char( + tty, 0, + TTY_NORMAL); + info->icount.rx++; + } + } else { + tty_insert_flip_char(tty, 0, + TTY_NORMAL); + info->icount.rx++; + } + } else { + /* there was a software buffer + overrun and nothing could be + done about it!!! */ + info->icount.buf_overrun++; + info->idle_stats.overruns++; + } + } else { /* normal character reception */ + /* load # chars available from the chip */ + char_count = cy_readb(base_addr + + (CyRDCR << index)); #ifdef CY_ENABLE_MONITORING - ++info->mon.int_count; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; #endif - len = tty_buffer_request_room(tty, char_count); - while(len--){ - data = cy_readb(base_addr+(CyRDSR<idle_stats.recv_bytes++; - info->icount.rx++; + len = tty_buffer_request_room(tty, char_count); + while (len--) { + data = cy_readb(base_addr + + (CyRDSR << index)); + tty_insert_flip_char(tty, data, + TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; #ifdef CY_16Y_HACK - udelay(10L); + udelay(10L); #endif - } - info->idle_stats.recv_idle = jiffies; + } + info->idle_stats.recv_idle = jiffies; + } + tty_schedule_flip(tty); } - tty_schedule_flip(tty); - } - /* end of service */ - cy_writeb(base_addr+(CyRIR<card_lock); + /* end of service */ + cy_writeb(base_addr + (CyRIR << index), (save_xir & 0x3f)); + cy_writeb(base_addr + (CyCAR << index), (save_car)); + spin_unlock(&cinfo->card_lock); } - - if (status & CySRTransmit) { /* transmission interrupt */ - /* Since we only get here when the transmit buffer - is empty, we know we can always stuff a dozen - characters. */ + if (status & CySRTransmit) { /* transmission interrupt */ + /* Since we only get here when the transmit buffer + is empty, we know we can always stuff a dozen + characters. */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: xmit intr, chip %d\n\r", chip); + printk("cyy_interrupt: xmit intr, chip %d\n\r", chip); #endif - /* determine the channel & change to that context */ - spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr+(CyTIR<first_line; - save_car = cy_readb(base_addr+(CyCAR<last_active = jiffies; - if(info->tty == 0){ - cy_writeb(base_addr+(CySRER<xmit_fifo_size; - - if(info->x_char) { /* send special char */ - outch = info->x_char; - cy_writeb(base_addr+(CyTDR<icount.tx++; - info->x_char = 0; - } - - if (info->breakon || info->breakoff) { - if (info->breakon) { - cy_writeb(base_addr + (CyTDR<breakon = 0; - char_count -= 2; - } - if (info->breakoff) { - cy_writeb(base_addr + (CyTDR<breakoff = 0; - char_count -= 2; + /* determine the channel & change to that context */ + spin_lock(&cinfo->card_lock); + save_xir = (u_char) cy_readb(base_addr + (CyTIR << index)); + channel = (u_short) (save_xir & CyIRChannel); + i = channel + chip * 4 + cinfo->first_line; + save_car = cy_readb(base_addr + (CyCAR << index)); + cy_writeb(base_addr + (CyCAR << index), save_xir); + + /* validate the port# (as configured and open) */ + if ((i < 0) || (NR_PORTS <= i)) { + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) & + ~CyTxRdy); + goto txend; } - } - - while (char_count-- > 0){ - if (!info->xmit_cnt){ - if (cy_readb(base_addr+(CySRER<last_active = jiffies; + if (info->tty == 0) { + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) & + ~CyTxRdy); + goto txdone; } - if (info->xmit_buf == 0){ - cy_writeb(base_addr+(CySRER<xmit_fifo_size; + + if (info->x_char) { /* send special char */ + outch = info->x_char; + cy_writeb(base_addr + (CyTDR << index), outch); + char_count--; + info->icount.tx++; + info->x_char = 0; } - if (info->tty->stopped || info->tty->hw_stopped){ - cy_writeb(base_addr+(CySRER<breakon || info->breakoff) { + if (info->breakon) { + cy_writeb(base_addr + (CyTDR << index), 0); + cy_writeb(base_addr + (CyTDR << index), 0x81); + info->breakon = 0; + char_count -= 2; + } + if (info->breakoff) { + cy_writeb(base_addr + (CyTDR << index), 0); + cy_writeb(base_addr + (CyTDR << index), 0x83); + info->breakoff = 0; + char_count -= 2; + } } - /* Because the Embedded Transmit Commands have - been enabled, we must check to see if the - escape character, NULL, is being sent. If it - is, we must ensure that there is room for it - to be doubled in the output stream. Therefore - we no longer advance the pointer when the - character is fetched, but rather wait until - after the check for a NULL output character. - This is necessary because there may not be - room for the two chars needed to send a NULL.) - */ - outch = info->xmit_buf[info->xmit_tail]; - if( outch ){ - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - cy_writeb(base_addr+(CyTDR<icount.tx++; - }else{ - if(char_count > 1){ - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - cy_writeb(base_addr+(CyTDR<icount.tx++; - char_count--; - }else{ - } + + while (char_count-- > 0) { + if (!info->xmit_cnt) { + if (cy_readb(base_addr + (CySRER << index)) & + CyTxMpty) { + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + + (CySRER << index)) & + ~CyTxMpty); + } else { + cy_writeb(base_addr + (CySRER << index), + (cy_readb(base_addr + + (CySRER << index)) & + ~CyTxRdy) | CyTxMpty); + } + goto txdone; + } + if (info->xmit_buf == 0) { + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index))& + ~CyTxRdy); + goto txdone; + } + if (info->tty->stopped || info->tty->hw_stopped) { + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index))& + ~CyTxRdy); + goto txdone; + } + /* Because the Embedded Transmit Commands have + been enabled, we must check to see if the + escape character, NULL, is being sent. If it + is, we must ensure that there is room for it + to be doubled in the output stream. Therefore + we no longer advance the pointer when the + character is fetched, but rather wait until + after the check for a NULL output character. + This is necessary because there may not be + room for the two chars needed to send a NULL.) + */ + outch = info->xmit_buf[info->xmit_tail]; + if (outch) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + cy_writeb(base_addr + (CyTDR << index), outch); + info->icount.tx++; + } else { + if (char_count > 1) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1)& + (SERIAL_XMIT_SIZE - 1); + cy_writeb(base_addr + (CyTDR << index), + outch); + cy_writeb(base_addr + (CyTDR << index), + 0); + info->icount.tx++; + char_count--; + } else { + } + } } - } txdone: - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } txend: - /* end of service */ - cy_writeb(base_addr+(CyTIR<card_lock); + /* end of service */ + cy_writeb(base_addr + (CyTIR << index), (save_xir & 0x3f)); + cy_writeb(base_addr + (CyCAR << index), (save_car)); + spin_unlock(&cinfo->card_lock); } - if (status & CySRModem) { /* modem interrupt */ - - /* determine the channel & change to that context */ - spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr+(CyMIR<first_line]; - info->last_active = jiffies; - save_car = cy_readb(base_addr+(CyCAR<tty == 0){/* no place for data, ignore it*/ - ; - }else{ - if (mdm_change & CyANY_DELTA) { - /* For statistics only */ - if (mdm_change & CyDCD) info->icount.dcd++; - if (mdm_change & CyCTS) info->icount.cts++; - if (mdm_change & CyDSR) info->icount.dsr++; - if (mdm_change & CyRI) info->icount.rng++; - - cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); - } + if (status & CySRModem) { /* modem interrupt */ - if((mdm_change & CyDCD) - && (info->flags & ASYNC_CHECK_CD)){ - if(mdm_status & CyDCD){ - cy_sched_event(info, - Cy_EVENT_OPEN_WAKEUP); - }else{ - cy_sched_event(info, - Cy_EVENT_HANGUP); - } - } - if((mdm_change & CyCTS) - && (info->flags & ASYNC_CTS_FLOW)){ - if(info->tty->hw_stopped){ - if(mdm_status & CyCTS){ - /* cy_start isn't used - because... !!! */ - info->tty->hw_stopped = 0; - cy_writeb(base_addr+(CySRER<card_lock); + save_xir = (u_char) cy_readb(base_addr + (CyMIR << index)); + channel = (u_short) (save_xir & CyIRChannel); + info = &cy_port[channel + chip * 4 + cinfo->first_line]; + info->last_active = jiffies; + save_car = cy_readb(base_addr + (CyCAR << index)); + cy_writeb(base_addr + (CyCAR << index), save_xir); + + mdm_change = cy_readb(base_addr + (CyMISR << index)); + mdm_status = cy_readb(base_addr + (CyMSVR1 << index)); + + if (info->tty == 0) { /* no place for data, ignore it */ + ; + } else { + if (mdm_change & CyANY_DELTA) { + /* For statistics only */ + if (mdm_change & CyDCD) + info->icount.dcd++; + if (mdm_change & CyCTS) + info->icount.cts++; + if (mdm_change & CyDSR) + info->icount.dsr++; + if (mdm_change & CyRI) + info->icount.rng++; + + cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); } - }else{ - if(!(mdm_status & CyCTS)){ - /* cy_stop isn't used - because ... !!! */ - info->tty->hw_stopped = 1; - cy_writeb(base_addr+(CySRER<flags & ASYNC_CHECK_CD)) { + if (mdm_status & CyDCD) { + cy_sched_event(info, + Cy_EVENT_OPEN_WAKEUP); + } else { + cy_sched_event(info, Cy_EVENT_HANGUP); + } + } + if ((mdm_change & CyCTS) && + (info->flags & ASYNC_CTS_FLOW)) { + if (info->tty->hw_stopped) { + if (mdm_status & CyCTS) { + /* cy_start isn't used + because... !!! */ + info->tty->hw_stopped = 0; + cy_writeb(base_addr + + (CySRER << index), + cy_readb(base_addr + + (CySRER << + index))| + CyTxRdy); + cy_sched_event(info, + Cy_EVENT_WRITE_WAKEUP); + } + } else { + if (!(mdm_status & CyCTS)) { + /* cy_stop isn't used + because ... !!! */ + info->tty->hw_stopped = 1; + cy_writeb(base_addr + + (CySRER << index), + cy_readb(base_addr + + (CySRER << + index)) & + ~CyTxRdy); + } + } + } + if (mdm_change & CyDSR) { + } + if (mdm_change & CyRI) { } - } - } - if(mdm_change & CyDSR){ - } - if(mdm_change & CyRI){ } - } - /* end of service */ - cy_writeb(base_addr+(CyMIR<card_lock); + /* end of service */ + cy_writeb(base_addr + (CyMIR << index), (save_xir & 0x3f)); + cy_writeb(base_addr + (CyCAR << index), save_car); + spin_unlock(&cinfo->card_lock); } } @@ -1392,60 +1439,61 @@ txend: whenever the card wants its hand held--chars received, out buffer empty, modem change, etc. */ -static irqreturn_t -cyy_interrupt(int irq, void *dev_id) +static irqreturn_t cyy_interrupt(int irq, void *dev_id) { - int status; - struct cyclades_card *cinfo; - void __iomem *base_addr, *card_base_addr; - int chip; - int index; - int too_many; - int had_work; - - if((cinfo = (struct cyclades_card *)dev_id) == 0){ + int status; + struct cyclades_card *cinfo; + void __iomem *base_addr, *card_base_addr; + int chip; + int index; + int too_many; + int had_work; + + if ((cinfo = (struct cyclades_card *)dev_id) == 0) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: spurious interrupt %d\n\r", irq); + printk("cyy_interrupt: spurious interrupt %d\n\r", irq); #endif - return IRQ_NONE; /* spurious interrupt */ - } - - card_base_addr = cinfo->base_addr; - index = cinfo->bus_index; - - - /* This loop checks all chips in the card. Make a note whenever - _any_ chip had some work to do, as this is considered an - indication that there will be more to do. Only when no chip - has any work does this outermost loop exit. - */ - do{ - had_work = 0; - for ( chip = 0 ; chip < cinfo->num_chips ; chip ++) { - base_addr = cinfo->base_addr + (cy_chip_offset[chip]<card_lock); - cy_writeb(card_base_addr + (Cy_ClrIntr<card_lock); - return IRQ_HANDLED; -} /* cyy_interrupt */ + return IRQ_NONE; /* spurious interrupt */ + } + + card_base_addr = cinfo->base_addr; + index = cinfo->bus_index; + + /* This loop checks all chips in the card. Make a note whenever + _any_ chip had some work to do, as this is considered an + indication that there will be more to do. Only when no chip + has any work does this outermost loop exit. + */ + do { + had_work = 0; + for (chip = 0; chip < cinfo->num_chips; chip++) { + base_addr = cinfo->base_addr + + (cy_chip_offset[chip] << index); + too_many = 0; + while ((status = cy_readb(base_addr + + (CySVRR << index))) != 0x00) { + had_work++; + /* The purpose of the following test is to ensure that + no chip can monopolize the driver. This forces the + chips to be checked in a round-robin fashion (after + draining each of a bunch (1000) of characters). + */ + if (1000 < too_many++) { + break; + } + cyy_intr_chip(cinfo, chip, base_addr, status, + index); + } + } + } while (had_work); + + /* clear interrupts */ + spin_lock(&cinfo->card_lock); + cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + spin_unlock(&cinfo->card_lock); + return IRQ_HANDLED; +} /* cyy_interrupt */ /***********************************************************/ /********* End of block of Cyclom-Y specific code **********/ @@ -1453,643 +1501,656 @@ cyy_interrupt(int irq, void *dev_id) /***********************************************************/ static int -cyz_fetch_msg( struct cyclades_card *cinfo, - uclong *channel, ucchar *cmd, uclong *param) +cyz_fetch_msg(struct cyclades_card *cinfo, + uclong * channel, ucchar * cmd, uclong * param) { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - unsigned long loc_doorbell; - - firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)){ - return (-1); - } - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - - loc_doorbell = cy_readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->loc_doorbell); - if (loc_doorbell){ - *cmd = (char)(0xff & loc_doorbell); - *channel = cy_readl(&board_ctrl->fwcmd_channel); - *param = (uclong)cy_readl(&board_ctrl->fwcmd_param); - cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->loc_doorbell, - 0xffffffff); - return 1; - } - return 0; -} /* cyz_fetch_msg */ + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + unsigned long loc_doorbell; + + firm_id = cinfo->base_addr + ID_ADDRESS; + if (!ISZLOADED(*cinfo)) { + return (-1); + } + zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & + 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + + loc_doorbell = cy_readl(&((struct RUNTIME_9060 __iomem *) + (cinfo->ctl_addr))->loc_doorbell); + if (loc_doorbell) { + *cmd = (char)(0xff & loc_doorbell); + *channel = cy_readl(&board_ctrl->fwcmd_channel); + *param = (uclong) cy_readl(&board_ctrl->fwcmd_param); + cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> + loc_doorbell, 0xffffffff); + return 1; + } + return 0; +} /* cyz_fetch_msg */ static int -cyz_issue_cmd( struct cyclades_card *cinfo, - uclong channel, ucchar cmd, uclong param) +cyz_issue_cmd(struct cyclades_card *cinfo, + uclong channel, ucchar cmd, uclong param) { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - unsigned long __iomem *pci_doorbell; - int index; - - firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)){ - return (-1); - } - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - - index = 0; - pci_doorbell = &((struct RUNTIME_9060 __iomem *) (cinfo->ctl_addr))->pci_doorbell; - while( (cy_readl(pci_doorbell) & 0xff) != 0){ - if (index++ == 1000){ - return((int)(cy_readl(pci_doorbell) & 0xff)); - } - udelay(50L); - } - cy_writel(&board_ctrl->hcmd_channel, channel); - cy_writel(&board_ctrl->hcmd_param , param); - cy_writel(pci_doorbell, (long)cmd); - - return(0); -} /* cyz_issue_cmd */ + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + unsigned long __iomem *pci_doorbell; + int index; + + firm_id = cinfo->base_addr + ID_ADDRESS; + if (!ISZLOADED(*cinfo)) { + return (-1); + } + zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & + 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + + index = 0; + pci_doorbell = + &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; + while ((cy_readl(pci_doorbell) & 0xff) != 0) { + if (index++ == 1000) { + return ((int)(cy_readl(pci_doorbell) & 0xff)); + } + udelay(50L); + } + cy_writel(&board_ctrl->hcmd_channel, channel); + cy_writel(&board_ctrl->hcmd_param, param); + cy_writel(pci_doorbell, (long)cmd); + + return (0); +} /* cyz_issue_cmd */ static void cyz_handle_rx(struct cyclades_port *info, - volatile struct CH_CTRL __iomem *ch_ctrl, - volatile struct BUF_CTRL __iomem *buf_ctrl) + volatile struct CH_CTRL __iomem * ch_ctrl, + volatile struct BUF_CTRL __iomem * buf_ctrl) { - struct cyclades_card *cinfo = &cy_card[info->card]; - struct tty_struct *tty = info->tty; - volatile int char_count; - int len; + struct cyclades_card *cinfo = &cy_card[info->card]; + struct tty_struct *tty = info->tty; + volatile int char_count; + int len; #ifdef BLOCKMOVE - int small_count; + int small_count; #else - char data; + char data; #endif - volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; + volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; - rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get); - rx_put = cy_readl(&buf_ctrl->rx_put); - rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize); - rx_bufaddr = cy_readl(&buf_ctrl->rx_bufaddr); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; + rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get); + rx_put = cy_readl(&buf_ctrl->rx_put); + rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize); + rx_bufaddr = cy_readl(&buf_ctrl->rx_bufaddr); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; - if ( char_count ) { - info->last_active = jiffies; - info->jiffies[1] = jiffies; + if (char_count) { + info->last_active = jiffies; + info->jiffies[1] = jiffies; #ifdef CY_ENABLE_MONITORING - info->mon.int_count++; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; + info->mon.int_count++; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; #endif - if(tty == 0){ - /* flush received characters */ - new_rx_get = (new_rx_get + char_count) & (rx_bufsize - 1); - info->rflush_count++; - }else{ + if (tty == 0) { + /* flush received characters */ + new_rx_get = (new_rx_get + char_count) & + (rx_bufsize - 1); + info->rflush_count++; + } else { #ifdef BLOCKMOVE - /* we'd like to use memcpy(t, f, n) and memset(s, c, count) - for performance, but because of buffer boundaries, there - may be several steps to the operation */ - while(0 < (small_count = - min_t(unsigned int, (rx_bufsize - new_rx_get), - min_t(unsigned int, (TTY_FLIPBUF_SIZE - tty->flip.count), char_count)) - )) { - memcpy_fromio(tty->flip.char_buf_ptr, - (char *)(cinfo->base_addr - + rx_bufaddr + new_rx_get), - small_count); - - tty->flip.char_buf_ptr += small_count; - memset(tty->flip.flag_buf_ptr, TTY_NORMAL, small_count); - tty->flip.flag_buf_ptr += small_count; - new_rx_get = (new_rx_get + small_count) & (rx_bufsize - 1); - char_count -= small_count; - info->icount.rx += small_count; - info->idle_stats.recv_bytes += small_count; - tty->flip.count += small_count; - } + /* we'd like to use memcpy(t, f, n) and memset(s, c, count) + for performance, but because of buffer boundaries, there + may be several steps to the operation */ + while (0 < (small_count = min_t(unsigned int, + rx_bufsize - new_rx_get, + min_t(unsigned int, TTY_FLIPBUF_SIZE - + tty->flip.count, char_count)))){ + memcpy_fromio(tty->flip.char_buf_ptr, + (char *)(cinfo->base_addr + rx_bufaddr + + new_rx_get), + small_count); + + tty->flip.char_buf_ptr += small_count; + memset(tty->flip.flag_buf_ptr, TTY_NORMAL, + small_count); + tty->flip.flag_buf_ptr += small_count; + new_rx_get = (new_rx_get + small_count) & + (rx_bufsize - 1); + char_count -= small_count; + info->icount.rx += small_count; + info->idle_stats.recv_bytes += small_count; + tty->flip.count += small_count; + } #else - len = tty_buffer_request_room(tty, char_count); - while(len--){ - data = cy_readb(cinfo->base_addr + rx_bufaddr + new_rx_get); - new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1); - tty_insert_flip_char(tty, data, TTY_NORMAL); - info->idle_stats.recv_bytes++; - info->icount.rx++; - } + len = tty_buffer_request_room(tty, char_count); + while (len--) { + data = cy_readb(cinfo->base_addr + rx_bufaddr + + new_rx_get); + new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1); + tty_insert_flip_char(tty, data, TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; + } #endif #ifdef CONFIG_CYZ_INTR - /* Recalculate the number of chars in the RX buffer and issue - a cmd in case it's higher than the RX high water mark */ - rx_put = cy_readl(&buf_ctrl->rx_put); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; - if(char_count >= cy_readl(&buf_ctrl->rx_threshold)) { - cy_sched_event(info, Cy_EVENT_Z_RX_FULL); - } + /* Recalculate the number of chars in the RX buffer and issue + a cmd in case it's higher than the RX high water mark */ + rx_put = cy_readl(&buf_ctrl->rx_put); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; + if (char_count >= cy_readl(&buf_ctrl->rx_threshold)) { + cy_sched_event(info, Cy_EVENT_Z_RX_FULL); + } #endif - info->idle_stats.recv_idle = jiffies; - tty_schedule_flip(tty); + info->idle_stats.recv_idle = jiffies; + tty_schedule_flip(tty); + } + /* Update rx_get */ + cy_writel(&buf_ctrl->rx_get, new_rx_get); } - /* Update rx_get */ - cy_writel(&buf_ctrl->rx_get, new_rx_get); - } } static void cyz_handle_tx(struct cyclades_port *info, - volatile struct CH_CTRL __iomem *ch_ctrl, - volatile struct BUF_CTRL __iomem *buf_ctrl) + volatile struct CH_CTRL __iomem * ch_ctrl, + volatile struct BUF_CTRL __iomem * buf_ctrl) { - struct cyclades_card *cinfo = &cy_card[info->card]; - struct tty_struct *tty = info->tty; - char data; - volatile int char_count; + struct cyclades_card *cinfo = &cy_card[info->card]; + struct tty_struct *tty = info->tty; + char data; + volatile int char_count; #ifdef BLOCKMOVE - int small_count; + int small_count; #endif - volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr; + volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr; - if (info->xmit_cnt <= 0) /* Nothing to transmit */ - return; + if (info->xmit_cnt <= 0) /* Nothing to transmit */ + return; - tx_get = cy_readl(&buf_ctrl->tx_get); - tx_put = cy_readl(&buf_ctrl->tx_put); - tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); - tx_bufaddr = cy_readl(&buf_ctrl->tx_bufaddr); - if (tx_put >= tx_get) - char_count = tx_get - tx_put - 1 + tx_bufsize; - else - char_count = tx_get - tx_put - 1; + tx_get = cy_readl(&buf_ctrl->tx_get); + tx_put = cy_readl(&buf_ctrl->tx_put); + tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); + tx_bufaddr = cy_readl(&buf_ctrl->tx_bufaddr); + if (tx_put >= tx_get) + char_count = tx_get - tx_put - 1 + tx_bufsize; + else + char_count = tx_get - tx_put - 1; - if ( char_count ) { + if (char_count) { - if( tty == 0 ){ - goto ztxdone; - } + if (tty == 0) { + goto ztxdone; + } - if(info->x_char) { /* send special char */ - data = info->x_char; + if (info->x_char) { /* send special char */ + data = info->x_char; - cy_writeb((cinfo->base_addr + tx_bufaddr + tx_put), data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - info->x_char = 0; - char_count--; - info->icount.tx++; - info->last_active = jiffies; - info->jiffies[2] = jiffies; - } + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + info->x_char = 0; + char_count--; + info->icount.tx++; + info->last_active = jiffies; + info->jiffies[2] = jiffies; + } #ifdef BLOCKMOVE - while(0 < (small_count = - min_t(unsigned int, (tx_bufsize - tx_put), - min_t(unsigned int, (SERIAL_XMIT_SIZE - info->xmit_tail), - min_t(unsigned int, info->xmit_cnt, char_count))))) { - - memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put), - &info->xmit_buf[info->xmit_tail], - small_count); - - tx_put = (tx_put + small_count) & (tx_bufsize - 1); - char_count -= small_count; - info->icount.tx += small_count; - info->xmit_cnt -= small_count; - info->xmit_tail = - (info->xmit_tail + small_count) & (SERIAL_XMIT_SIZE - 1); - info->last_active = jiffies; - info->jiffies[2] = jiffies; - } + while (0 < (small_count = min_t(unsigned int, + tx_bufsize - tx_put, min_t(unsigned int, + (SERIAL_XMIT_SIZE - info->xmit_tail), + min_t(unsigned int, info->xmit_cnt, + char_count))))) { + + memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + + tx_put), + &info->xmit_buf[info->xmit_tail], + small_count); + + tx_put = (tx_put + small_count) & (tx_bufsize - 1); + char_count -= small_count; + info->icount.tx += small_count; + info->xmit_cnt -= small_count; + info->xmit_tail = (info->xmit_tail + small_count) & + (SERIAL_XMIT_SIZE - 1); + info->last_active = jiffies; + info->jiffies[2] = jiffies; + } #else - while (info->xmit_cnt && char_count){ - data = info->xmit_buf[info->xmit_tail]; - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1); - - cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - char_count--; - info->icount.tx++; - info->last_active = jiffies; - info->jiffies[2] = jiffies; - } + while (info->xmit_cnt && char_count) { + data = info->xmit_buf[info->xmit_tail]; + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + char_count--; + info->icount.tx++; + info->last_active = jiffies; + info->jiffies[2] = jiffies; + } #endif - ztxdone: - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); +ztxdone: + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + /* Update tx_put */ + cy_writel(&buf_ctrl->tx_put, tx_put); } - /* Update tx_put */ - cy_writel(&buf_ctrl->tx_put, tx_put); - } } -static void -cyz_handle_cmd(struct cyclades_card *cinfo) +static void cyz_handle_cmd(struct cyclades_card *cinfo) { - struct tty_struct *tty; - struct cyclades_port *info; - static volatile struct FIRM_ID __iomem *firm_id; - static volatile struct ZFW_CTRL __iomem *zfw_ctrl; - static volatile struct BOARD_CTRL __iomem *board_ctrl; - static volatile struct CH_CTRL __iomem *ch_ctrl; - static volatile struct BUF_CTRL __iomem *buf_ctrl; - uclong channel; - ucchar cmd; - uclong param; - uclong hw_ver, fw_ver; - int special_count; - int delta_count; - - firm_id = cinfo->base_addr + ID_ADDRESS; - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - fw_ver = cy_readl(&board_ctrl->fw_version); - hw_ver = cy_readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->mail_box_0); - - - while(cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { - special_count = 0; - delta_count = 0; - info = &cy_port[channel + cinfo->first_line]; - if((tty = info->tty) == 0) { - continue; - } - ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); - - switch(cmd) { - case C_CM_PR_ERROR: - tty_insert_flip_char(tty, 0, TTY_PARITY); - info->icount.rx++; - special_count++; - break; - case C_CM_FR_ERROR: - tty_insert_flip_char(tty, 0, TTY_FRAME); - info->icount.rx++; - special_count++; - break; - case C_CM_RXBRK: - tty_insert_flip_char(tty, 0, TTY_BREAK); - info->icount.rx++; - special_count++; - break; - case C_CM_MDCD: - info->icount.dcd++; - delta_count++; - if (info->flags & ASYNC_CHECK_CD){ - if ((fw_ver > 241 ? - ((u_long)param) : - cy_readl(&ch_ctrl->rs_status)) & C_RS_DCD) { - cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); - }else{ - cy_sched_event(info, Cy_EVENT_HANGUP); - } + struct tty_struct *tty; + struct cyclades_port *info; + static volatile struct FIRM_ID __iomem *firm_id; + static volatile struct ZFW_CTRL __iomem *zfw_ctrl; + static volatile struct BOARD_CTRL __iomem *board_ctrl; + static volatile struct CH_CTRL __iomem *ch_ctrl; + static volatile struct BUF_CTRL __iomem *buf_ctrl; + uclong channel; + ucchar cmd; + uclong param; + uclong hw_ver, fw_ver; + int special_count; + int delta_count; + + firm_id = cinfo->base_addr + ID_ADDRESS; + zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & + 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + fw_ver = cy_readl(&board_ctrl->fw_version); + hw_ver = cy_readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> + mail_box_0); + + while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { + special_count = 0; + delta_count = 0; + info = &cy_port[channel + cinfo->first_line]; + if ((tty = info->tty) == 0) { + continue; } - break; - case C_CM_MCTS: - info->icount.cts++; - delta_count++; - break; - case C_CM_MRI: - info->icount.rng++; - delta_count++; - break; - case C_CM_MDSR: - info->icount.dsr++; - delta_count++; - break; + ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); + buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); + + switch (cmd) { + case C_CM_PR_ERROR: + tty_insert_flip_char(tty, 0, TTY_PARITY); + info->icount.rx++; + special_count++; + break; + case C_CM_FR_ERROR: + tty_insert_flip_char(tty, 0, TTY_FRAME); + info->icount.rx++; + special_count++; + break; + case C_CM_RXBRK: + tty_insert_flip_char(tty, 0, TTY_BREAK); + info->icount.rx++; + special_count++; + break; + case C_CM_MDCD: + info->icount.dcd++; + delta_count++; + if (info->flags & ASYNC_CHECK_CD) { + if ((fw_ver > 241 ? ((u_long) param) : + cy_readl(&ch_ctrl->rs_status)) & + C_RS_DCD) { + cy_sched_event(info, + Cy_EVENT_OPEN_WAKEUP); + } else { + cy_sched_event(info, Cy_EVENT_HANGUP); + } + } + break; + case C_CM_MCTS: + info->icount.cts++; + delta_count++; + break; + case C_CM_MRI: + info->icount.rng++; + delta_count++; + break; + case C_CM_MDSR: + info->icount.dsr++; + delta_count++; + break; #ifdef Z_WAKE - case C_CM_IOCTLW: - cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP); - break; + case C_CM_IOCTLW: + cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP); + break; #endif #ifdef CONFIG_CYZ_INTR - case C_CM_RXHIWM: - case C_CM_RXNNDT: - case C_CM_INTBACK2: - /* Reception Interrupt */ + case C_CM_RXHIWM: + case C_CM_RXNNDT: + case C_CM_INTBACK2: + /* Reception Interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: rcvd intr, card %d, port %ld\n\r", - info->card, channel); + printk("cyz_interrupt: rcvd intr, card %d, " + "port %ld\n\r", info->card, channel); #endif - cyz_handle_rx(info, ch_ctrl, buf_ctrl); - break; - case C_CM_TXBEMPTY: - case C_CM_TXLOWWM: - case C_CM_INTBACK: - /* Transmission Interrupt */ + cyz_handle_rx(info, ch_ctrl, buf_ctrl); + break; + case C_CM_TXBEMPTY: + case C_CM_TXLOWWM: + case C_CM_INTBACK: + /* Transmission Interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: xmit intr, card %d, port %ld\n\r", - info->card, channel); + printk("cyz_interrupt: xmit intr, card %d, " + "port %ld\n\r", info->card, channel); #endif - cyz_handle_tx(info, ch_ctrl, buf_ctrl); - break; -#endif /* CONFIG_CYZ_INTR */ - case C_CM_FATAL: - /* should do something with this !!! */ - break; - default: - break; + cyz_handle_tx(info, ch_ctrl, buf_ctrl); + break; +#endif /* CONFIG_CYZ_INTR */ + case C_CM_FATAL: + /* should do something with this !!! */ + break; + default: + break; + } + if (delta_count) + cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); + if (special_count) + tty_schedule_flip(tty); } - if(delta_count) - cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); - if(special_count) - tty_schedule_flip(tty); - } } #ifdef CONFIG_CYZ_INTR -static irqreturn_t -cyz_interrupt(int irq, void *dev_id) +static irqreturn_t cyz_interrupt(int irq, void *dev_id) { - struct cyclades_card *cinfo; + struct cyclades_card *cinfo; - if((cinfo = (struct cyclades_card *)dev_id) == 0){ + if ((cinfo = (struct cyclades_card *)dev_id) == 0) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: spurious interrupt %d\n\r", irq); + printk("cyz_interrupt: spurious interrupt %d\n\r", irq); #endif - return IRQ_NONE; /* spurious interrupt */ - } + return IRQ_NONE; /* spurious interrupt */ + } - if (!ISZLOADED(*cinfo)) { + if (!ISZLOADED(*cinfo)) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq); + printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq); #endif - return IRQ_NONE; - } + return IRQ_NONE; + } - /* Handle the interrupts */ - cyz_handle_cmd(cinfo); + /* Handle the interrupts */ + cyz_handle_cmd(cinfo); - return IRQ_HANDLED; -} /* cyz_interrupt */ + return IRQ_HANDLED; +} /* cyz_interrupt */ -static void -cyz_rx_restart(unsigned long arg) +static void cyz_rx_restart(unsigned long arg) { - struct cyclades_port *info = (struct cyclades_port *)arg; - int retval; - int card = info->card; - uclong channel = (info->line) - (cy_card[card].first_line); - unsigned long flags; - - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L); - if (retval != 0){ - printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n", - info->line, retval); - } - cyz_rx_full_timer[info->line].function = NULL; - CY_UNLOCK(info, flags); + struct cyclades_port *info = (struct cyclades_port *)arg; + int retval; + int card = info->card; + uclong channel = (info->line) - (cy_card[card].first_line); + unsigned long flags; + + CY_LOCK(info, flags); + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L); + if (retval != 0) { + printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n", + info->line, retval); + } + cyz_rx_full_timer[info->line].function = NULL; + CY_UNLOCK(info, flags); } -#else /* CONFIG_CYZ_INTR */ +#else /* CONFIG_CYZ_INTR */ -static void -cyz_poll(unsigned long arg) +static void cyz_poll(unsigned long arg) { - struct cyclades_card *cinfo; - struct cyclades_port *info; - struct tty_struct *tty; - static volatile struct FIRM_ID *firm_id; - static volatile struct ZFW_CTRL *zfw_ctrl; - static volatile struct BOARD_CTRL *board_ctrl; - static volatile struct CH_CTRL *ch_ctrl; - static volatile struct BUF_CTRL *buf_ctrl; - int card, port; - - cyz_timerlist.expires = jiffies + (HZ); - for (card = 0 ; card < NR_CARDS ; card++){ - cinfo = &cy_card[card]; - - if (!IS_CYC_Z(*cinfo)) continue; - if (!ISZLOADED(*cinfo)) continue; + struct cyclades_card *cinfo; + struct cyclades_port *info; + struct tty_struct *tty; + static volatile struct FIRM_ID *firm_id; + static volatile struct ZFW_CTRL *zfw_ctrl; + static volatile struct BOARD_CTRL *board_ctrl; + static volatile struct CH_CTRL *ch_ctrl; + static volatile struct BUF_CTRL *buf_ctrl; + int card, port; - firm_id = cinfo->base_addr + ID_ADDRESS; - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &(zfw_ctrl->board_ctrl); + cyz_timerlist.expires = jiffies + (HZ); + for (card = 0; card < NR_CARDS; card++) { + cinfo = &cy_card[card]; + + if (!IS_CYC_Z(*cinfo)) + continue; + if (!ISZLOADED(*cinfo)) + continue; + + firm_id = cinfo->base_addr + ID_ADDRESS; + zfw_ctrl = cinfo->base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &(zfw_ctrl->board_ctrl); /* Skip first polling cycle to avoid racing conditions with the FW */ - if (!cinfo->intr_enabled) { - cinfo->nports = (int) cy_readl(&board_ctrl->n_channel); - cinfo->intr_enabled = 1; - continue; - } + if (!cinfo->intr_enabled) { + cinfo->nports = (int)cy_readl(&board_ctrl->n_channel); + cinfo->intr_enabled = 1; + continue; + } - cyz_handle_cmd(cinfo); + cyz_handle_cmd(cinfo); - for (port = 0 ; port < cinfo->nports ; port++) { - info = &cy_port[ port + cinfo->first_line ]; - tty = info->tty; - ch_ctrl = &(zfw_ctrl->ch_ctrl[port]); - buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); + for (port = 0; port < cinfo->nports; port++) { + info = &cy_port[port + cinfo->first_line]; + tty = info->tty; + ch_ctrl = &(zfw_ctrl->ch_ctrl[port]); + buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); - if (!info->throttle) - cyz_handle_rx(info, ch_ctrl, buf_ctrl); - cyz_handle_tx(info, ch_ctrl, buf_ctrl); + if (!info->throttle) + cyz_handle_rx(info, ch_ctrl, buf_ctrl); + cyz_handle_tx(info, ch_ctrl, buf_ctrl); + } + /* poll every 'cyz_polling_cycle' period */ + cyz_timerlist.expires = jiffies + cyz_polling_cycle; } - /* poll every 'cyz_polling_cycle' period */ - cyz_timerlist.expires = jiffies + cyz_polling_cycle; - } - add_timer(&cyz_timerlist); + add_timer(&cyz_timerlist); - return; -} /* cyz_poll */ + return; +} /* cyz_poll */ -#endif /* CONFIG_CYZ_INTR */ +#endif /* CONFIG_CYZ_INTR */ /********** End of block of Cyclades-Z specific code *********/ /***********************************************************/ - /* This is called whenever a port becomes active; interrupts are enabled and DTR & RTS are turned on. */ -static int -startup(struct cyclades_port * info) +static int startup(struct cyclades_port *info) { - unsigned long flags; - int retval = 0; - void __iomem *base_addr; - int card,chip,channel,index; - unsigned long page; + unsigned long flags; + int retval = 0; + void __iomem *base_addr; + int card, chip, channel, index; + unsigned long page; - card = info->card; - channel = (info->line) - (cy_card[card].first_line); + card = info->card; + channel = (info->line) - (cy_card[card].first_line); - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; - CY_LOCK(info, flags); + CY_LOCK(info, flags); - if (info->flags & ASYNC_INITIALIZED){ - free_page(page); - goto errout; - } + if (info->flags & ASYNC_INITIALIZED) { + free_page(page); + goto errout; + } - if (!info->type){ - if (info->tty){ - set_bit(TTY_IO_ERROR, &info->tty->flags); - } - free_page(page); - goto errout; - } + if (!info->type) { + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + free_page(page); + goto errout; + } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; + if (info->xmit_buf) + free_page(page); + else + info->xmit_buf = (unsigned char *)page; - CY_UNLOCK(info, flags); + CY_UNLOCK(info, flags); - set_line_char(info); + set_line_char(info); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); #ifdef CY_DEBUG_OPEN - printk("cyc startup card %d, chip %d, channel %d, base_addr %lx\n", - card, chip, channel, (long)base_addr);/**/ + printk("cyc startup card %d, chip %d, channel %d, " + "base_addr %lx\n", + card, chip, channel, (long)base_addr); + /**/ #endif + CY_LOCK(info, flags); - CY_LOCK(info, flags); - - cy_writeb(base_addr+(CyCAR<default_timeout - ? info->default_timeout : 0x02)); /* 10ms rx timeout */ + cy_writeb(base_addr + (CyRTPR << index), + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ - cyy_issue_cmd(base_addr,CyCHAN_CTL|CyENB_RCVR|CyENB_XMTR,index); + cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR, + index); - cy_writeb(base_addr+(CyCAR<flags |= ASYNC_INITIALIZED; + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) | CyRxData); + info->flags |= ASYNC_INITIALIZED; - if (info->tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); - } - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - info->breakon = info->breakoff = 0; - memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); - info->idle_stats.in_use = - info->idle_stats.recv_idle = - info->idle_stats.xmit_idle = jiffies; + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + info->breakon = info->breakoff = 0; + memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); + info->idle_stats.in_use = + info->idle_stats.recv_idle = + info->idle_stats.xmit_idle = jiffies; - CY_UNLOCK(info, flags); + CY_UNLOCK(info, flags); - } else { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - int retval; + } else { + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + int retval; - base_addr = cy_card[card].base_addr; + base_addr = cy_card[card].base_addr; - firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])){ - return -ENODEV; - } + firm_id = base_addr + ID_ADDRESS; + if (!ISZLOADED(cy_card[card])) { + return -ENODEV; + } - zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = zfw_ctrl->ch_ctrl; + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = zfw_ctrl->ch_ctrl; #ifdef CY_DEBUG_OPEN - printk("cyc startup Z card %d, channel %d, base_addr %lx\n", - card, channel, (long)base_addr);/**/ + printk("cyc startup Z card %d, channel %d, base_addr %lx\n", + card, channel, (long)base_addr); + /**/ #endif + CY_LOCK(info, flags); - CY_LOCK(info, flags); - - cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE); + cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE); #ifdef Z_WAKE #ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl[channel].intr_enable, - C_IN_TXBEMPTY|C_IN_TXLOWWM|C_IN_RXHIWM|C_IN_RXNNDT| - C_IN_IOCTLW| - C_IN_MDCD); + cy_writel(&ch_ctrl[channel].intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); #else - cy_writel(&ch_ctrl[channel].intr_enable, - C_IN_IOCTLW| - C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ + cy_writel(&ch_ctrl[channel].intr_enable, + C_IN_IOCTLW | C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ #else #ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl[channel].intr_enable, - C_IN_TXBEMPTY|C_IN_TXLOWWM|C_IN_RXHIWM|C_IN_RXNNDT| - C_IN_MDCD); + cy_writel(&ch_ctrl[channel].intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_MDCD); #else - cy_writel(&ch_ctrl[channel].intr_enable, - C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ -#endif /* Z_WAKE */ - - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); - if (retval != 0){ - printk("cyc:startup(1) retval on ttyC%d was %x\n", - info->line, retval); - } + cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ +#endif /* Z_WAKE */ + + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk("cyc:startup(1) retval on ttyC%d was %x\n", + info->line, retval); + } - /* Flush RX buffers before raising DTR and RTS */ - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX, 0L); - if (retval != 0){ - printk("cyc:startup(2) retval on ttyC%d was %x\n", - info->line, retval); - } + /* Flush RX buffers before raising DTR and RTS */ + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX, + 0L); + if (retval != 0) { + printk("cyc:startup(2) retval on ttyC%d was %x\n", + info->line, retval); + } - /* set timeout !!! */ - /* set RTS and DTR !!! */ - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | C_RS_DTR) ; - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM, 0L); - if (retval != 0){ - printk("cyc:startup(3) retval on ttyC%d was %x\n", - info->line, retval); - } + /* set timeout !!! */ + /* set RTS and DTR !!! */ + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | + C_RS_DTR); + retval = cyz_issue_cmd(&cy_card[info->card], channel, + C_CM_IOCTLM, 0L); + if (retval != 0) { + printk("cyc:startup(3) retval on ttyC%d was %x\n", + info->line, retval); + } #ifdef CY_DEBUG_DTR - printk("cyc:startup raising Z DTR\n"); + printk("cyc:startup raising Z DTR\n"); #endif - /* enable send, recv, modem !!! */ + /* enable send, recv, modem !!! */ + + info->flags |= ASYNC_INITIALIZED; + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + info->breakon = info->breakoff = 0; + memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); + info->idle_stats.in_use = + info->idle_stats.recv_idle = + info->idle_stats.xmit_idle = jiffies; - info->flags |= ASYNC_INITIALIZED; - if (info->tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); + CY_UNLOCK(info, flags); } - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - info->breakon = info->breakoff = 0; - memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); - info->idle_stats.in_use = - info->idle_stats.recv_idle = - info->idle_stats.xmit_idle = jiffies; - - CY_UNLOCK(info, flags); - } #ifdef CY_DEBUG_OPEN printk(" cyc startup done\n"); @@ -2099,165 +2160,166 @@ startup(struct cyclades_port * info) errout: CY_UNLOCK(info, flags); return retval; -} /* startup */ +} /* startup */ - -static void -start_xmit( struct cyclades_port *info ) +static void start_xmit(struct cyclades_port *info) { - unsigned long flags; - void __iomem *base_addr; - int card,chip,channel,index; - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = (info->line) - (cy_card[card].first_line); + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); + + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), channel); + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) | CyTxRdy); + CY_UNLOCK(info, flags); + } else { #ifdef CONFIG_CYZ_INTR - int retval; + int retval; - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK, 0L); - if (retval != 0){ - printk("cyc:start_xmit retval on ttyC%d was %x\n", - info->line, retval); - } - CY_UNLOCK(info, flags); -#else /* CONFIG_CYZ_INTR */ - /* Don't have to do anything at this time */ -#endif /* CONFIG_CYZ_INTR */ - } -} /* start_xmit */ + CY_LOCK(info, flags); + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK, + 0L); + if (retval != 0) { + printk("cyc:start_xmit retval on ttyC%d was %x\n", + info->line, retval); + } + CY_UNLOCK(info, flags); +#else /* CONFIG_CYZ_INTR */ + /* Don't have to do anything at this time */ +#endif /* CONFIG_CYZ_INTR */ + } +} /* start_xmit */ /* * This routine shuts down a serial port; interrupts are disabled, * and DTR is dropped if the hangup on close termio flag is on. */ -static void -shutdown(struct cyclades_port * info) +static void shutdown(struct cyclades_port *info) { - unsigned long flags; - void __iomem *base_addr; - int card,chip,channel,index; - - if (!(info->flags & ASYNC_INITIALIZED)){ - return; - } - - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<flags & ASYNC_INITIALIZED)) { + return; + } + + card = info->card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); #ifdef CY_DEBUG_OPEN - printk("cyc shutdown Y card %d, chip %d, channel %d, base_addr %lx\n", - card, chip, channel, (long)base_addr); + printk("cyc shutdown Y card %d, chip %d, channel %d, " + "base_addr %lx\n", + card, chip, channel, (long)base_addr); #endif - CY_LOCK(info, flags); + CY_LOCK(info, flags); + + /* Clear delta_msr_wait queue to avoid mem leaks. */ + wake_up_interruptible(&info->delta_msr_wait); - /* Clear delta_msr_wait queue to avoid mem leaks. */ - wake_up_interruptible(&info->delta_msr_wait); - - if (info->xmit_buf){ - unsigned char * temp; - temp = info->xmit_buf; - info->xmit_buf = NULL; - free_page((unsigned long) temp); - } - cy_writeb(base_addr+(CyCAR<tty || (info->tty->termios->c_cflag & HUPCL)) { - cy_writeb(base_addr+(CyMSVR1<xmit_buf) { + unsigned char *temp; + temp = info->xmit_buf; + info->xmit_buf = NULL; + free_page((unsigned long)temp); + } + cy_writeb(base_addr + (CyCAR << index), (u_char) channel); + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); + cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR); #ifdef CY_DEBUG_DTR - printk("cyc shutdown dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<tty){ - set_bit(TTY_IO_ERROR, &info->tty->flags); - } - info->flags &= ~ASYNC_INITIALIZED; - CY_UNLOCK(info, flags); - } else { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - int retval; - - base_addr = cy_card[card].base_addr; + } + cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ + + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->flags &= ~ASYNC_INITIALIZED; + CY_UNLOCK(info, flags); + } else { + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + int retval; + + base_addr = cy_card[card].base_addr; #ifdef CY_DEBUG_OPEN - printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n", - card, channel, (long)base_addr); + printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n", + card, channel, (long)base_addr); #endif - firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])) { - return; - } + firm_id = base_addr + ID_ADDRESS; + if (!ISZLOADED(cy_card[card])) { + return; + } - zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = zfw_ctrl->ch_ctrl; + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = zfw_ctrl->ch_ctrl; - CY_LOCK(info, flags); + CY_LOCK(info, flags); - if (info->xmit_buf){ - unsigned char * temp; - temp = info->xmit_buf; - info->xmit_buf = NULL; - free_page((unsigned long) temp); - } - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { - cy_writel(&ch_ctrl[channel].rs_control, - (uclong)(cy_readl(&ch_ctrl[channel].rs_control) & - ~(C_RS_RTS | C_RS_DTR))); - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM, 0L); - if (retval != 0){ - printk("cyc:shutdown retval on ttyC%d was %x\n", - info->line, retval); + if (info->xmit_buf) { + unsigned char *temp; + temp = info->xmit_buf; + info->xmit_buf = NULL; + free_page((unsigned long)temp); } + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + cy_writel(&ch_ctrl[channel].rs_control, + (uclong)(cy_readl(&ch_ctrl[channel].rs_control)& + ~(C_RS_RTS | C_RS_DTR))); + retval = cyz_issue_cmd(&cy_card[info->card], channel, + C_CM_IOCTLM, 0L); + if (retval != 0) { + printk("cyc:shutdown retval on ttyC%d was %x\n", + info->line, retval); + } #ifdef CY_DEBUG_DTR - printk("cyc:shutdown dropping Z DTR\n"); + printk("cyc:shutdown dropping Z DTR\n"); #endif - } - - if (info->tty){ - set_bit(TTY_IO_ERROR, &info->tty->flags); - } - info->flags &= ~ASYNC_INITIALIZED; + } - CY_UNLOCK(info, flags); - } + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->flags &= ~ASYNC_INITIALIZED; + + CY_UNLOCK(info, flags); + } #ifdef CY_DEBUG_OPEN - printk(" cyc shutdown done\n"); + printk(" cyc shutdown done\n"); #endif - return; -} /* shutdown */ - + return; +} /* shutdown */ /* * ------------------------------------------------------------ @@ -2266,527 +2328,549 @@ shutdown(struct cyclades_port * info) */ static int -block_til_ready(struct tty_struct *tty, struct file * filp, - struct cyclades_port *info) +block_til_ready(struct tty_struct *tty, struct file *filp, + struct cyclades_port *info) { - DECLARE_WAITQUEUE(wait, current); - struct cyclades_card *cinfo; - unsigned long flags; - int chip, channel,index; - int retval; - void __iomem *base_addr; - - cinfo = &cy_card[info->card]; - channel = info->line - cinfo->first_line; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&info->close_wait); + DECLARE_WAITQUEUE(wait, current); + struct cyclades_card *cinfo; + unsigned long flags; + int chip, channel, index; + int retval; + void __iomem *base_addr; + + cinfo = &cy_card[info->card]; + channel = info->line - cinfo->first_line; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); + } + return ((info-> + flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); } - return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * cy_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); + + /* + * If non-blocking mode is set, then make the check up front + * and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * cy_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready before block: ttyC%d, count = %d\n", - info->line, info->count);/**/ + printk("cyc block_til_ready before block: ttyC%d, count = %d\n", + info->line, info->count); + /**/ #endif - CY_LOCK(info, flags); - if (!tty_hung_up_p(filp)) - info->count--; - CY_UNLOCK(info, flags); + CY_LOCK(info, flags); + if (!tty_hung_up_p(filp)) + info->count--; + CY_UNLOCK(info, flags); #ifdef CY_DEBUG_COUNT - printk("cyc block_til_ready: (%d): decrementing count to %d\n", - current->pid, info->count); + printk("cyc block_til_ready: (%d): decrementing count to %d\n", + current->pid, info->count); #endif - info->blocked_open++; - - if (!IS_CYC_Z(*cinfo)) { - chip = channel>>2; - channel &= 0x03; - index = cinfo->bus_index; - base_addr = cinfo->base_addr + (cy_chip_offset[chip]<termios->c_cflag & CBAUD)){ - cy_writeb(base_addr+(CyCAR<blocked_open++; + + if (!IS_CYC_Z(*cinfo)) { + chip = channel >> 2; + channel &= 0x03; + index = cinfo->bus_index; + base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); + + while (1) { + CY_LOCK(info, flags); + if ((tty->termios->c_cflag & CBAUD)) { + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + cy_writeb(base_addr + (CyMSVR1 << index), + CyRTS); + cy_writeb(base_addr + (CyMSVR2 << index), + CyDTR); #ifdef CY_DEBUG_DTR - printk("cyc:block_til_ready raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<flags & ASYNC_INITIALIZED) ){ - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - break; - } + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { + retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + break; + } - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCAR<flags & ASYNC_CLOSING) - && (C_CLOCAL(tty) - || (cy_readb(base_addr+(CyMSVR1<flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || + (cy_readb(base_addr + + (CyMSVR1 << index)) & CyDCD))) { + CY_UNLOCK(info, flags); + break; + } CY_UNLOCK(info, flags); - break; - } - CY_UNLOCK(info, flags); - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready blocking: ttyC%d, count = %d\n", - info->line, info->count);/**/ + printk("cyc block_til_ready blocking: ttyC%d, " + "count = %d\n", + info->line, info->count); + /**/ #endif - schedule(); - } - } else { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - int retval; - - base_addr = cinfo->base_addr; - firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)){ - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - return -EINVAL; - } - - zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = zfw_ctrl->ch_ctrl; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)){ - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) | - (C_RS_RTS | C_RS_DTR)); - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM, 0L); - if (retval != 0){ - printk("cyc:block_til_ready retval on ttyC%d was %x\n", - info->line, retval); + schedule(); } + } else { + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + int retval; + + base_addr = cinfo->base_addr; + firm_id = base_addr + ID_ADDRESS; + if (!ISZLOADED(*cinfo)) { + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + return -EINVAL; + } + + zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & + 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = zfw_ctrl->ch_ctrl; + + while (1) { + if ((tty->termios->c_cflag & CBAUD)) { + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel]. + rs_control) | (C_RS_RTS | + C_RS_DTR)); + retval = cyz_issue_cmd(&cy_card[info->card], + channel, C_CM_IOCTLM, 0L); + if (retval != 0) { + printk("cyc:block_til_ready retval on " + "ttyC%d was %x\n", + info->line, retval); + } #ifdef CY_DEBUG_DTR - printk("cyc:block_til_ready raising Z DTR\n"); + printk("cyc:block_til_ready raising Z DTR\n"); #endif - } + } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) - || !(info->flags & ASYNC_INITIALIZED) ){ - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - break; - } - if (!(info->flags & ASYNC_CLOSING) - && (C_CLOCAL(tty) - || (cy_readl(&ch_ctrl[channel].rs_status) & C_RS_DCD))) { - break; - } - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { + retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + break; + } + if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || + (cy_readl(&ch_ctrl[channel].rs_status) & + C_RS_DCD))) { + break; + } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready blocking: ttyC%d, count = %d\n", - info->line, info->count);/**/ + printk("cyc block_til_ready blocking: ttyC%d, " + "count = %d\n", + info->line, info->count); + /**/ #endif - schedule(); + schedule(); + } } - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)){ - info->count++; + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) { + info->count++; #ifdef CY_DEBUG_COUNT - printk("cyc:block_til_ready (%d): incrementing count to %d\n", - current->pid, info->count); + printk("cyc:block_til_ready (%d): incrementing count to %d\n", + current->pid, info->count); #endif - } - info->blocked_open--; + } + info->blocked_open--; #ifdef CY_DEBUG_OPEN - printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n", - info->line, info->count);/**/ + printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n", + info->line, info->count); + /**/ #endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} /* block_til_ready */ - + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} /* block_til_ready */ /* * This routine is called whenever a serial port is opened. It * performs the serial-specific initialization for the tty structure. */ -static int -cy_open(struct tty_struct *tty, struct file * filp) +static int cy_open(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (NR_PORTS <= line)){ - return -ENODEV; - } - info = &cy_port[line]; - if (info->line < 0){ - return -ENODEV; - } - - /* If the card's firmware hasn't been loaded, - treat it as absent from the system. This - will make the user pay attention. - */ - if (IS_CYC_Z(cy_card[info->card])) { - struct cyclades_card *cinfo = &cy_card[info->card]; - struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - - if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->mail_box_0)) && - Z_FPGA_CHECK (*cinfo)) && - (ZFIRM_HLT == cy_readl (&firm_id->signature))) - { - printk ("cyc:Cyclades-Z Error: you need an external power supply for this number of ports.\n\rFirmware halted.\r\n"); - } else { - printk("cyc:Cyclades-Z firmware not yet loaded\n"); - } - return -ENODEV; - } -#ifdef CONFIG_CYZ_INTR - else { - /* In case this Z board is operating in interrupt mode, its - interrupts should be enabled as soon as the first open happens - to one of its ports. */ - if (!cinfo->intr_enabled) { - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - - zfw_ctrl = cinfo->base_addr + (cy_readl (&firm_id->zfwctrl_addr) & 0xfffff); + struct cyclades_port *info; + int retval, line; - board_ctrl = &zfw_ctrl->board_ctrl; + line = tty->index; + if ((line < 0) || (NR_PORTS <= line)) { + return -ENODEV; + } + info = &cy_port[line]; + if (info->line < 0) { + return -ENODEV; + } - /* Enable interrupts on the PLX chip */ - cy_writew(cinfo->ctl_addr+0x68, - cy_readw(cinfo->ctl_addr+0x68)|0x0900); - /* Enable interrupts on the FW */ - retval = cyz_issue_cmd(cinfo, - 0, C_CM_IRQ_ENBL, 0L); - if (retval != 0){ - printk("cyc:IRQ enable retval was %x\n", retval); + /* If the card's firmware hasn't been loaded, + treat it as absent from the system. This + will make the user pay attention. + */ + if (IS_CYC_Z(cy_card[info->card])) { + struct cyclades_card *cinfo = &cy_card[info->card]; + struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; + + if (!ISZLOADED(*cinfo)) { + if (((ZE_V1 == cy_readl( + &((struct RUNTIME_9060 __iomem *) + (cinfo->ctl_addr))->mail_box_0)) && + Z_FPGA_CHECK(*cinfo)) && + (ZFIRM_HLT == cy_readl( + &firm_id->signature))) { + printk("cyc:Cyclades-Z Error: you need an " + "external power supply for this number " + "of ports.\n\rFirmware halted.\r\n"); + } else { + printk("cyc:Cyclades-Z firmware not yet " + "loaded\n"); + } + return -ENODEV; + } +#ifdef CONFIG_CYZ_INTR + else { + /* In case this Z board is operating in interrupt mode, its + interrupts should be enabled as soon as the first open + happens to one of its ports. */ + if (!cinfo->intr_enabled) { + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + + zfw_ctrl = cinfo->base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & + 0xfffff); + + board_ctrl = &zfw_ctrl->board_ctrl; + + /* Enable interrupts on the PLX chip */ + cy_writew(cinfo->ctl_addr + 0x68, + cy_readw(cinfo->ctl_addr + + 0x68) | 0x0900); + /* Enable interrupts on the FW */ + retval = cyz_issue_cmd(cinfo, 0, + C_CM_IRQ_ENBL, 0L); + if (retval != 0) { + printk("cyc:IRQ enable retval was %x\n", + retval); + } + cinfo->nports = + (int)cy_readl(&board_ctrl->n_channel); + cinfo->intr_enabled = 1; + } } - cinfo->nports = (int) cy_readl (&board_ctrl->n_channel); - cinfo->intr_enabled = 1; - } +#endif /* CONFIG_CYZ_INTR */ + /* Make sure this Z port really exists in hardware */ + if (info->line > (cinfo->first_line + cinfo->nports - 1)) + return -ENODEV; } -#endif /* CONFIG_CYZ_INTR */ - /* Make sure this Z port really exists in hardware */ - if (info->line > (cinfo->first_line + cinfo->nports - 1)) - return -ENODEV; - } #ifdef CY_DEBUG_OTHER - printk("cyc:cy_open ttyC%d\n", info->line); /* */ + printk("cyc:cy_open ttyC%d\n", info->line); /* */ #endif - tty->driver_data = info; - info->tty = tty; - if (serial_paranoia_check(info, tty->name, "cy_open")){ - return -ENODEV; - } + tty->driver_data = info; + info->tty = tty; + if (serial_paranoia_check(info, tty->name, "cy_open")) { + return -ENODEV; + } #ifdef CY_DEBUG_OPEN - printk("cyc:cy_open ttyC%d, count = %d\n", - info->line, info->count);/**/ + printk("cyc:cy_open ttyC%d, count = %d\n", info->line, info->count); + /**/ #endif - info->count++; + info->count++; #ifdef CY_DEBUG_COUNT - printk("cyc:cy_open (%d): incrementing count to %d\n", - current->pid, info->count); + printk("cyc:cy_open (%d): incrementing count to %d\n", + current->pid, info->count); #endif - /* - * If the port is the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * Start up serial port - */ - retval = startup(info); - if (retval){ - return retval; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef CY_DEBUG_OPEN - printk("cyc:cy_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } + /* + * If the port is the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + return ((info-> + flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); + } - info->throttle = 0; + /* + * Start up serial port + */ + retval = startup(info); + if (retval) { + return retval; + } + retval = block_til_ready(tty, filp, info); + if (retval) { #ifdef CY_DEBUG_OPEN - printk(" cyc:cy_open done\n");/**/ + printk("cyc:cy_open returning after block_til_ready with %d\n", + retval); #endif + return retval; + } - return 0; -} /* cy_open */ + info->throttle = 0; +#ifdef CY_DEBUG_OPEN + printk(" cyc:cy_open done\n"); + /**/ +#endif + return 0; +} /* cy_open */ /* * cy_wait_until_sent() --- wait until the transmitter is empty */ -static void -cy_wait_until_sent(struct tty_struct *tty, int timeout) +static void cy_wait_until_sent(struct tty_struct *tty, int timeout) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - void __iomem *base_addr; - int card,chip,channel,index; - unsigned long orig_jiffies; - int char_time; - - if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) - return; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + void __iomem *base_addr; + int card, chip, channel, index; + unsigned long orig_jiffies; + int char_time; + + if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time <= 0) - char_time = 1; - if (timeout < 0) - timeout = 0; - if (timeout) - char_time = min(char_time, timeout); - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2*info->timeout) - timeout = 2*info->timeout; + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time <= 0) + char_time = 1; + if (timeout < 0) + timeout = 0; + if (timeout) + char_time = min(char_time, timeout); + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); + printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); #endif - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = (info->line) - (cy_card[card].first_line); + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + while (cy_readb(base_addr + (CySRER << index)) & CyTxRdy) { #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("Not clean (jiff=%lu)...", jiffies); + printk("Not clean (jiff=%lu)...", jiffies); #endif - if (msleep_interruptible(jiffies_to_msecs(char_time))) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; + if (msleep_interruptible(jiffies_to_msecs(char_time))) + break; + if (timeout && time_after(jiffies, orig_jiffies + + timeout)) + break; + } + } else { + // Nothing to do! } - } else { - // Nothing to do! - } - /* Run one more char cycle */ - msleep_interruptible(jiffies_to_msecs(char_time * 5)); + /* Run one more char cycle */ + msleep_interruptible(jiffies_to_msecs(char_time * 5)); #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("Clean (jiff=%lu)...done\n", jiffies); + printk("Clean (jiff=%lu)...done\n", jiffies); #endif } /* * This routine is called when a particular tty device is closed. */ -static void -cy_close(struct tty_struct *tty, struct file *filp) +static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_close ttyC%d\n", info->line); + printk("cyc:cy_close ttyC%d\n", info->line); #endif - if (!info || serial_paranoia_check(info, tty->name, "cy_close")){ - return; - } + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { + return; + } - CY_LOCK(info, flags); - /* If the TTY is being hung up, nothing to do */ - if (tty_hung_up_p(filp)) { - CY_UNLOCK(info, flags); - return; - } - + CY_LOCK(info, flags); + /* If the TTY is being hung up, nothing to do */ + if (tty_hung_up_p(filp)) { + CY_UNLOCK(info, flags); + return; + } #ifdef CY_DEBUG_OPEN - printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count); + printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count); #endif - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("cyc:cy_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("cyc:cy_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } #ifdef CY_DEBUG_COUNT - printk("cyc:cy_close at (%d): decrementing count to %d\n", - current->pid, info->count - 1); + printk("cyc:cy_close at (%d): decrementing count to %d\n", + current->pid, info->count - 1); #endif - if (--info->count < 0) { + if (--info->count < 0) { #ifdef CY_DEBUG_COUNT - printk("cyc:cyc_close setting count to 0\n"); + printk("cyc:cyc_close setting count to 0\n"); #endif - info->count = 0; - } - if (info->count) { - CY_UNLOCK(info, flags); - return; - } - info->flags |= ASYNC_CLOSING; - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - CY_UNLOCK(info, flags); - if (info->closing_wait != CY_CLOSING_WAIT_NONE) { - tty_wait_until_sent(tty, info->closing_wait); - } - CY_LOCK(info, flags); - - if (!IS_CYC_Z(cy_card[info->card])) { - int channel = info->line - cy_card[info->card].first_line; - int index = cy_card[info->card].bus_index; - void __iomem *base_addr = cy_card[info->card].base_addr + (cy_chip_offset[channel>>2] << index); - /* Stop accepting input */ - channel &= 0x03; - cy_writeb(base_addr+(CyCAR<flags & ASYNC_INITIALIZED) { - /* Waiting for on-board buffers to be empty before closing - the port */ - CY_UNLOCK(info, flags); - cy_wait_until_sent(tty, info->timeout); - CY_LOCK(info, flags); + info->count = 0; } - } else { -#ifdef Z_WAKE - /* Waiting for on-board buffers to be empty before closing the port */ - void __iomem *base_addr = cy_card[info->card].base_addr; - struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; - struct ZFW_CTRL __iomem *zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl; - int channel = info->line - cy_card[info->card].first_line; - int retval; + if (info->count) { + CY_UNLOCK(info, flags); + return; + } + info->flags |= ASYNC_CLOSING; - if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { - retval = cyz_issue_cmd(&cy_card[info->card], channel, - C_CM_IOCTLW, 0L); - if (retval != 0){ - printk("cyc:cy_close retval on ttyC%d was %x\n", - info->line, retval); - } - CY_UNLOCK(info, flags); - interruptible_sleep_on(&info->shutdown_wait); - CY_LOCK(info, flags); + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + CY_UNLOCK(info, flags); + if (info->closing_wait != CY_CLOSING_WAIT_NONE) { + tty_wait_until_sent(tty, info->closing_wait); } + CY_LOCK(info, flags); + + if (!IS_CYC_Z(cy_card[info->card])) { + int channel = info->line - cy_card[info->card].first_line; + int index = cy_card[info->card].bus_index; + void __iomem *base_addr = cy_card[info->card].base_addr + + (cy_chip_offset[channel >> 2] << index); + /* Stop accepting input */ + channel &= 0x03; + cy_writeb(base_addr + (CyCAR << index), (u_char) channel); + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) & ~CyRxData); + if (info->flags & ASYNC_INITIALIZED) { + /* Waiting for on-board buffers to be empty before closing + the port */ + CY_UNLOCK(info, flags); + cy_wait_until_sent(tty, info->timeout); + CY_LOCK(info, flags); + } + } else { +#ifdef Z_WAKE + /* Waiting for on-board buffers to be empty before closing the port */ + void __iomem *base_addr = cy_card[info->card].base_addr; + struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; + struct ZFW_CTRL __iomem *zfw_ctrl = + base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl; + int channel = info->line - cy_card[info->card].first_line; + int retval; + + if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { + retval = cyz_issue_cmd(&cy_card[info->card], channel, + C_CM_IOCTLW, 0L); + if (retval != 0) { + printk("cyc:cy_close retval on ttyC%d was %x\n", + info->line, retval); + } + CY_UNLOCK(info, flags); + interruptible_sleep_on(&info->shutdown_wait); + CY_LOCK(info, flags); + } #endif - } - - CY_UNLOCK(info, flags); - shutdown(info); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - CY_LOCK(info, flags); - - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { + } + CY_UNLOCK(info, flags); - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); CY_LOCK(info, flags); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); + + tty->closing = 0; + info->event = 0; + info->tty = NULL; + if (info->blocked_open) { + CY_UNLOCK(info, flags); + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs + (info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + CY_LOCK(info, flags); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); #ifdef CY_DEBUG_OTHER - printk(" cyc:cy_close done\n"); + printk(" cyc:cy_close done\n"); #endif - CY_UNLOCK(info, flags); - return; -} /* cy_close */ - + CY_UNLOCK(info, flags); + return; +} /* cy_close */ /* This routine gets called when tty_write has put something into * the write_queue. The characters may come from user space or @@ -2801,50 +2885,49 @@ cy_close(struct tty_struct *tty, struct file *filp) * If the port is already active, there is no need to kick it. * */ -static int -cy_write(struct tty_struct * tty, const unsigned char *buf, int count) +static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - int c, ret = 0; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + int c, ret = 0; #ifdef CY_DEBUG_IO - printk("cyc:cy_write ttyC%d\n", info->line); /* */ + printk("cyc:cy_write ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_write")){ - return 0; - } - - if (!info->xmit_buf) - return 0; + if (serial_paranoia_check(info, tty->name, "cy_write")) { + return 0; + } - CY_LOCK(info, flags); - while (1) { - c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1), - (int)(SERIAL_XMIT_SIZE - info->xmit_head))); - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt += c; - buf += c; - count -= c; - ret += c; - } - CY_UNLOCK(info, flags); - - info->idle_stats.xmit_bytes += ret; - info->idle_stats.xmit_idle = jiffies; - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - start_xmit(info); - } - return ret; -} /* cy_write */ + if (!info->xmit_buf) + return 0; + CY_LOCK(info, flags); + while (1) { + c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1), + (int)(SERIAL_XMIT_SIZE - info->xmit_head))); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + buf += c; + count -= c; + ret += c; + } + CY_UNLOCK(info, flags); + + info->idle_stats.xmit_bytes += ret; + info->idle_stats.xmit_idle = jiffies; + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + start_xmit(info); + } + return ret; +} /* cy_write */ /* * This routine is called by the kernel to write a single @@ -2853,60 +2936,56 @@ cy_write(struct tty_struct * tty, const unsigned char *buf, int count) * done stuffing characters into the driver. If there is no room * in the queue, the character is ignored. */ -static void -cy_put_char(struct tty_struct *tty, unsigned char ch) +static void cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; #ifdef CY_DEBUG_IO - printk("cyc:cy_put_char ttyC%d\n", info->line); + printk("cyc:cy_put_char ttyC%d\n", info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_put_char")) - return; + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return; - if (!info->xmit_buf) - return; + if (!info->xmit_buf) + return; - CY_LOCK(info, flags); - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - CY_UNLOCK(info, flags); - return; - } + CY_LOCK(info, flags); + if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { + CY_UNLOCK(info, flags); + return; + } - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; info->idle_stats.xmit_bytes++; info->idle_stats.xmit_idle = jiffies; - CY_UNLOCK(info, flags); -} /* cy_put_char */ - + CY_UNLOCK(info, flags); +} /* cy_put_char */ /* * This routine is called by the kernel after it has written a * series of characters to the tty device using put_char(). */ -static void -cy_flush_chars(struct tty_struct *tty) +static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + #ifdef CY_DEBUG_IO - printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */ + printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped - || tty->hw_stopped || !info->xmit_buf) - return; + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; - start_xmit(info); -} /* cy_flush_chars */ + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + start_xmit(info); +} /* cy_flush_chars */ /* * This routine returns the numbers of characters the tty driver @@ -2914,75 +2993,70 @@ cy_flush_chars(struct tty_struct *tty) * to change as output buffers get emptied, or if the output flow * control is activated. */ -static int -cy_write_room(struct tty_struct *tty) +static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int ret; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int ret; + #ifdef CY_DEBUG_IO - printk("cyc:cy_write_room ttyC%d\n", info->line); /* */ + printk("cyc:cy_write_room ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} /* cy_write_room */ + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ - -static int -cy_chars_in_buffer(struct tty_struct *tty) +static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, channel; - - if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) - return 0; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int card, channel; - card = info->card; - channel = (info->line) - (cy_card[card].first_line); + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + + card = info->card; + channel = (info->line) - (cy_card[card].first_line); #ifdef Z_EXT_CHARS_IN_BUFFER - if (!IS_CYC_Z(cy_card[card])) { -#endif /* Z_EXT_CHARS_IN_BUFFER */ + if (!IS_CYC_Z(cy_card[card])) { +#endif /* Z_EXT_CHARS_IN_BUFFER */ #ifdef CY_DEBUG_IO - printk("cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt); /* */ + printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */ #endif - return info->xmit_cnt; + return info->xmit_cnt; #ifdef Z_EXT_CHARS_IN_BUFFER - } else { - static volatile struct FIRM_ID *firm_id; - static volatile struct ZFW_CTRL *zfw_ctrl; - static volatile struct CH_CTRL *ch_ctrl; - static volatile struct BUF_CTRL *buf_ctrl; - int char_count; - volatile uclong tx_put, tx_get, tx_bufsize; - - firm_id = cy_card[card].base_addr + ID_ADDRESS; - zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); - - tx_get = cy_readl(&buf_ctrl->tx_get); - tx_put = cy_readl(&buf_ctrl->tx_put); - tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); - if (tx_put >= tx_get) - char_count = tx_put - tx_get; - else - char_count = tx_put - tx_get + tx_bufsize; + } else { + static volatile struct FIRM_ID *firm_id; + static volatile struct ZFW_CTRL *zfw_ctrl; + static volatile struct CH_CTRL *ch_ctrl; + static volatile struct BUF_CTRL *buf_ctrl; + int char_count; + volatile uclong tx_put, tx_get, tx_bufsize; + + firm_id = cy_card[card].base_addr + ID_ADDRESS; + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); + buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); + + tx_get = cy_readl(&buf_ctrl->tx_get); + tx_put = cy_readl(&buf_ctrl->tx_put); + tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); + if (tx_put >= tx_get) + char_count = tx_put - tx_get; + else + char_count = tx_put - tx_get + tx_bufsize; #ifdef CY_DEBUG_IO - printk("cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt + char_count); /* */ + printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */ #endif - return (info->xmit_cnt + char_count); - } -#endif /* Z_EXT_CHARS_IN_BUFFER */ -} /* cy_chars_in_buffer */ - + return (info->xmit_cnt + char_count); + } +#endif /* Z_EXT_CHARS_IN_BUFFER */ +} /* cy_chars_in_buffer */ /* * ------------------------------------------------------------ @@ -2990,178 +3064,179 @@ cy_chars_in_buffer(struct tty_struct *tty) * ------------------------------------------------------------ */ -static void -cyy_baud_calc(struct cyclades_port *info, uclong baud) +static void cyy_baud_calc(struct cyclades_port *info, uclong baud) { - int co, co_val, bpr; - uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : 25000000); + int co, co_val, bpr; + uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : + 25000000); - if (baud == 0) { - info->tbpr = info->tco = info->rbpr = info->rco = 0; - return; - } + if (baud == 0) { + info->tbpr = info->tco = info->rbpr = info->rco = 0; + return; + } - /* determine which prescaler to use */ - for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { - if (cy_clock / co_val / baud > 63) - break; - } + /* determine which prescaler to use */ + for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { + if (cy_clock / co_val / baud > 63) + break; + } - bpr = (cy_clock / co_val * 2 / baud + 1) / 2; - if (bpr > 255) - bpr = 255; + bpr = (cy_clock / co_val * 2 / baud + 1) / 2; + if (bpr > 255) + bpr = 255; - info->tbpr = info->rbpr = bpr; - info->tco = info->rco = co; + info->tbpr = info->rbpr = bpr; + info->tco = info->rco = co; } /* * This routine finds or computes the various line characteristics. * It used to be called config_setup */ -static void -set_line_char(struct cyclades_port * info) +static void set_line_char(struct cyclades_port *info) { - unsigned long flags; - void __iomem *base_addr; - int card,chip,channel,index; - unsigned cflag, iflag; - unsigned short chip_number; - int baud, baud_rate = 0; - int i; - - - if (!info->tty || !info->tty->termios){ - return; - } - if (info->line == -1){ - return; - } - cflag = info->tty->termios->c_cflag; - iflag = info->tty->termios->c_iflag; - - /* - * Set up the tty->alt_speed kludge - */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - chip_number = channel / 4; - - if (!IS_CYC_Z(cy_card[card])) { - - index = cy_card[card].bus_index; - - /* baud rate */ - baud = tty_get_baud_rate(info->tty); - if ((baud == 38400) && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CD1400_MAX_SPEED) { - baud = CD1400_MAX_SPEED; + unsigned long flags; + void __iomem *base_addr; + int card, chip, channel, index; + unsigned cflag, iflag; + unsigned short chip_number; + int baud, baud_rate = 0; + int i; + + if (!info->tty || !info->tty->termios) { + return; } - /* find the baud index */ - for (i = 0; i < 20; i++) { - if (baud == baud_table[i]) { - break; - } + if (info->line == -1) { + return; } - if (i == 20) { - i = 19; /* CD1400_MAX_SPEED */ - } + cflag = info->tty->termios->c_cflag; + iflag = info->tty->termios->c_iflag; - if ((baud == 38400) && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) { - cyy_baud_calc(info, baud_rate); - } else { - if(info->chip_rev >= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[i]; /* Tx BPR */ - info->tco = baud_co_60[i]; /* Tx CO */ - info->rbpr = baud_bpr_60[i]; /* Rx BPR */ - info->rco = baud_co_60[i]; /* Rx CO */ - } else { - info->tbpr = baud_bpr_25[i]; /* Tx BPR */ - info->tco = baud_co_25[i]; /* Tx CO */ - info->rbpr = baud_bpr_25[i]; /* Rx BPR */ - info->rco = baud_co_25[i]; /* Rx CO */ - } - } - if (baud_table[i] == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; - } else if ((baud == 38400) && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) { - info->timeout = (info->xmit_fifo_size*HZ*15/baud_rate) + 2; - } else if (baud_table[i]) { - info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - /* By tradition (is it a standard?) a baud rate of zero - implies the line should be/has been closed. A bit - later in this routine such a test is performed. */ - - /* byte size and parity */ - info->cor5 = 0; - info->cor4 = 0; - info->cor3 = (info->default_threshold - ? info->default_threshold - : baud_cor3[i]); /* receive threshold */ - info->cor2 = CyETC; - switch(cflag & CSIZE){ - case CS5: - info->cor1 = Cy_5_BITS; - break; - case CS6: - info->cor1 = Cy_6_BITS; - break; - case CS7: - info->cor1 = Cy_7_BITS; - break; - case CS8: - info->cor1 = Cy_8_BITS; - break; - } - if(cflag & CSTOPB){ - info->cor1 |= Cy_2_STOP; - } - if (cflag & PARENB){ - if (cflag & PARODD){ - info->cor1 |= CyPARITY_O; - }else{ - info->cor1 |= CyPARITY_E; - } - }else{ - info->cor1 |= CyPARITY_NONE; - } - - /* CTS flow control flag */ - if (cflag & CRTSCTS){ - info->flags |= ASYNC_CTS_FLOW; - info->cor2 |= CyCtsAE; - }else{ - info->flags &= ~ASYNC_CTS_FLOW; - info->cor2 &= ~CyCtsAE; + /* + * Set up the tty->alt_speed kludge + */ + if (info->tty) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; } - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else - info->flags |= ASYNC_CHECK_CD; + + card = info->card; + channel = (info->line) - (cy_card[card].first_line); + chip_number = channel / 4; + + if (!IS_CYC_Z(cy_card[card])) { + + index = cy_card[card].bus_index; + + /* baud rate */ + baud = tty_get_baud_rate(info->tty); + if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CD1400_MAX_SPEED) { + baud = CD1400_MAX_SPEED; + } + /* find the baud index */ + for (i = 0; i < 20; i++) { + if (baud == baud_table[i]) { + break; + } + } + if (i == 20) { + i = 19; /* CD1400_MAX_SPEED */ + } + + if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + cyy_baud_calc(info, baud_rate); + } else { + if (info->chip_rev >= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[i]; /* Tx BPR */ + info->tco = baud_co_60[i]; /* Tx CO */ + info->rbpr = baud_bpr_60[i]; /* Rx BPR */ + info->rco = baud_co_60[i]; /* Rx CO */ + } else { + info->tbpr = baud_bpr_25[i]; /* Tx BPR */ + info->tco = baud_co_25[i]; /* Tx CO */ + info->rbpr = baud_bpr_25[i]; /* Rx BPR */ + info->rco = baud_co_25[i]; /* Rx CO */ + } + } + if (baud_table[i] == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud_table[i]) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_table[i]) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor5 = 0; + info->cor4 = 0; + /* receive threshold */ + info->cor3 = (info->default_threshold ? + info->default_threshold : baud_cor3[i]); + info->cor2 = CyETC; + switch (cflag & CSIZE) { + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & CSTOPB) { + info->cor1 |= Cy_2_STOP; + } + if (cflag & PARENB) { + if (cflag & PARODD) { + info->cor1 |= CyPARITY_O; + } else { + info->cor1 |= CyPARITY_E; + } + } else { + info->cor1 |= CyPARITY_NONE; + } + + /* CTS flow control flag */ + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->cor2 |= CyCtsAE; + } else { + info->flags &= ~ASYNC_CTS_FLOW; + info->cor2 &= ~CyCtsAE; + } + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; /*********************************************** The hardware option, CyRtsAO, presents RTS when @@ -3173,300 +3248,319 @@ set_line_char(struct cyclades_port * info) cable. Contact Marcio Saito for details. ***********************************************/ - chip = channel>>2; - channel &= 0x03; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<> 2; + channel &= 0x03; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCAR<tco); - cy_writeb(base_addr+(CyTBPR<tbpr); - cy_writeb(base_addr+(CyRCOR<rco); - cy_writeb(base_addr+(CyRBPR<rbpr); - - /* set line characteristics according configuration */ - - cy_writeb(base_addr+(CySCHR1<tty)); - cy_writeb(base_addr+(CySCHR2<tty)); - cy_writeb(base_addr+(CyCOR1<cor1); - cy_writeb(base_addr+(CyCOR2<cor2); - cy_writeb(base_addr+(CyCOR3<cor3); - cy_writeb(base_addr+(CyCOR4<cor4); - cy_writeb(base_addr+(CyCOR5<cor5); - - cyy_issue_cmd(base_addr, - CyCOR_CHANGE|CyCOR1ch|CyCOR2ch|CyCOR3ch,index); - - cy_writeb(base_addr+(CyCAR<default_timeout - ? info->default_timeout - : 0x02)); /* 10ms rx timeout */ - - if (C_CLOCAL(info->tty)) { - /* without modem intr */ - cy_writeb(base_addr+(CySRER<0 modem transitions */ - if ((cflag & CRTSCTS) && info->rflow) { - cy_writeb(base_addr+(CyMCOR1<1 modem transitions */ - cy_writeb(base_addr+(CyMCOR2<0 modem transitions */ - if ((cflag & CRTSCTS) && info->rflow) { - cy_writeb(base_addr+(CyMCOR1<1 modem transitions */ - cy_writeb(base_addr+(CyMCOR2<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR1<tco); + cy_writeb(base_addr + (CyTBPR << index), info->tbpr); + cy_writeb(base_addr + (CyRCOR << index), info->rco); + cy_writeb(base_addr + (CyRBPR << index), info->rbpr); + + /* set line characteristics according configuration */ + + cy_writeb(base_addr + (CySCHR1 << index), + START_CHAR(info->tty)); + cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty)); + cy_writeb(base_addr + (CyCOR1 << index), info->cor1); + cy_writeb(base_addr + (CyCOR2 << index), info->cor2); + cy_writeb(base_addr + (CyCOR3 << index), info->cor3); + cy_writeb(base_addr + (CyCOR4 << index), info->cor4); + cy_writeb(base_addr + (CyCOR5 << index), info->cor5); + + cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | + CyCOR3ch, index); + + cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */ + cy_writeb(base_addr + (CyRTPR << index), + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ + + if (C_CLOCAL(info->tty)) { + /* without modem intr */ + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + + (CySRER << index)) | CyMdmCh); + /* act on 1->0 modem transitions */ + if ((cflag & CRTSCTS) && info->rflow) { + cy_writeb(base_addr + (CyMCOR1 << index), + (CyCTS | rflow_thr[i])); + } else { + cy_writeb(base_addr + (CyMCOR1 << index), + CyCTS); + } + /* act on 0->1 modem transitions */ + cy_writeb(base_addr + (CyMCOR2 << index), CyCTS); } else { - cy_writeb(base_addr+(CyMSVR2<0 modem transitions */ + if ((cflag & CRTSCTS) && info->rflow) { + cy_writeb(base_addr + (CyMCOR1 << index), + (CyDSR | CyCTS | CyRI | CyDCD | + rflow_thr[i])); + } else { + cy_writeb(base_addr + (CyMCOR1 << index), + CyDSR | CyCTS | CyRI | CyDCD); + } + /* act on 0->1 modem transitions */ + cy_writeb(base_addr + (CyMCOR2 << index), + CyDSR | CyCTS | CyRI | CyDCD); } + + if (i == 0) { /* baud rate is zero, turn off line */ + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR1 << index), + ~CyRTS); + } else { + cy_writeb(base_addr + (CyMSVR2 << index), + ~CyDTR); + } #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR1<rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR1 << index), + CyRTS); + } else { + cy_writeb(base_addr + (CyMSVR2 << index), + CyDTR); + } #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); - } - CY_UNLOCK(info, flags); + } - } else { - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - struct BUF_CTRL __iomem *buf_ctrl; - uclong sw_flow; - int retval; - - firm_id = cy_card[card].base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])) { - return; - } + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + CY_UNLOCK(info, flags); - zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; - - /* baud rate */ - baud = tty_get_baud_rate(info->tty); - if ((baud == 38400) && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CYZ_MAX_SPEED) { - baud = CYZ_MAX_SPEED; - } - cy_writel(&ch_ctrl->comm_baud , baud); - - if (baud == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; - } else if ((baud == 38400) && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) { - info->timeout = (info->xmit_fifo_size*HZ*15/baud_rate) + 2; - } else if (baud) { - info->timeout = (info->xmit_fifo_size*HZ*15/baud) + 2; - /* this needs to be propagated into the card info */ } else { - info->timeout = 0; - } + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + struct BUF_CTRL __iomem *buf_ctrl; + uclong sw_flow; + int retval; - /* byte size and parity */ - switch(cflag & CSIZE){ - case CS5: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS5); break; - case CS6: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS6); break; - case CS7: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS7); break; - case CS8: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS8); break; - } - if(cflag & CSTOPB){ - cy_writel(&ch_ctrl->comm_data_l, - cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); - }else{ - cy_writel(&ch_ctrl->comm_data_l, - cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); - } - if (cflag & PARENB){ - if (cflag & PARODD){ - cy_writel(&ch_ctrl->comm_parity , C_PR_ODD); - }else{ - cy_writel(&ch_ctrl->comm_parity , C_PR_EVEN); - } - }else{ - cy_writel(&ch_ctrl->comm_parity , C_PR_NONE); - } + firm_id = cy_card[card].base_addr + ID_ADDRESS; + if (!ISZLOADED(cy_card[card])) { + return; + } - /* CTS flow control flag */ - if (cflag & CRTSCTS){ - cy_writel(&ch_ctrl->hw_flow, - cy_readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); - }else{ - cy_writel(&ch_ctrl->hw_flow, - cy_readl(&ch_ctrl->hw_flow) & ~(C_RS_CTS | C_RS_RTS)); - } - /* As the HW flow control is done in firmware, the driver doesn't - need to care about it */ - info->flags &= ~ASYNC_CTS_FLOW; - - /* XON/XOFF/XANY flow control flags */ - sw_flow = 0; - if (iflag & IXON){ - sw_flow |= C_FL_OXX; - if (iflag & IXANY) - sw_flow |= C_FL_OIXANY; - } - cy_writel(&ch_ctrl->sw_flow, sw_flow); + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); + buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; + + /* baud rate */ + baud = tty_get_baud_rate(info->tty); + if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CYZ_MAX_SPEED) { + baud = CYZ_MAX_SPEED; + } + cy_writel(&ch_ctrl->comm_baud, baud); + + if (baud == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); - if (retval != 0){ - printk("cyc:set_line_char retval on ttyC%d was %x\n", - info->line, retval); - } + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); + break; + case CS6: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); + break; + case CS7: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); + break; + case CS8: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); + break; + } + if (cflag & CSTOPB) { + cy_writel(&ch_ctrl->comm_data_l, + cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); + } else { + cy_writel(&ch_ctrl->comm_data_l, + cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); + } + if (cflag & PARENB) { + if (cflag & PARODD) { + cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); + } else { + cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); + } + } else { + cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); + } - /* CD sensitivity */ - if (cflag & CLOCAL){ - info->flags &= ~ASYNC_CHECK_CD; - }else{ - info->flags |= ASYNC_CHECK_CD; - } + /* CTS flow control flag */ + if (cflag & CRTSCTS) { + cy_writel(&ch_ctrl->hw_flow, + cy_readl(&ch_ctrl-> + hw_flow) | C_RS_CTS | C_RS_RTS); + } else { + cy_writel(&ch_ctrl->hw_flow, + cy_readl(&ch_ctrl-> + hw_flow) & ~(C_RS_CTS | C_RS_RTS)); + } + /* As the HW flow control is done in firmware, the driver + doesn't need to care about it */ + info->flags &= ~ASYNC_CTS_FLOW; + + /* XON/XOFF/XANY flow control flags */ + sw_flow = 0; + if (iflag & IXON) { + sw_flow |= C_FL_OXX; + if (iflag & IXANY) + sw_flow |= C_FL_OIXANY; + } + cy_writel(&ch_ctrl->sw_flow, sw_flow); + + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk("cyc:set_line_char retval on ttyC%d was %x\n", + info->line, retval); + } + + /* CD sensitivity */ + if (cflag & CLOCAL) { + info->flags &= ~ASYNC_CHECK_CD; + } else { + info->flags |= ASYNC_CHECK_CD; + } - if(baud == 0){ /* baud rate is zero, turn off line */ - cy_writel(&ch_ctrl->rs_control, - cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR); + if (baud == 0) { /* baud rate is zero, turn off line */ + cy_writel(&ch_ctrl->rs_control, + cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char dropping Z DTR\n"); + printk("cyc:set_line_char dropping Z DTR\n"); #endif - }else{ - cy_writel(&ch_ctrl->rs_control, - cy_readl(&ch_ctrl->rs_control) | C_RS_DTR); + } else { + cy_writel(&ch_ctrl->rs_control, + cy_readl(&ch_ctrl->rs_control) | C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char raising Z DTR\n"); + printk("cyc:set_line_char raising Z DTR\n"); #endif - } + } - retval = cyz_issue_cmd( &cy_card[card], channel, C_CM_IOCTLM, 0L); - if (retval != 0){ - printk("cyc:set_line_char(2) retval on ttyC%d was %x\n", - info->line, retval); - } + retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTLM,0L); + if (retval != 0) { + printk("cyc:set_line_char(2) retval on ttyC%d was %x\n", + info->line, retval); + } - if (info->tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } } - } -} /* set_line_char */ - +} /* set_line_char */ static int -get_serial_info(struct cyclades_port * info, - struct serial_struct __user * retinfo) +get_serial_info(struct cyclades_port *info, + struct serial_struct __user * retinfo) { - struct serial_struct tmp; - struct cyclades_card *cinfo = &cy_card[info->card]; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->card * 0x100 + info->line - cinfo->first_line; - tmp.irq = cinfo->irq; - tmp.flags = info->flags; - tmp.close_delay = info->close_delay; - tmp.baud_base = info->baud; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; /*!!!*/ - return copy_to_user(retinfo,&tmp,sizeof(*retinfo))?-EFAULT:0; -} /* get_serial_info */ + struct serial_struct tmp; + struct cyclades_card *cinfo = &cy_card[info->card]; + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->card * 0x100 + info->line - cinfo->first_line; + tmp.irq = cinfo->irq; + tmp.flags = info->flags; + tmp.close_delay = info->close_delay; + tmp.baud_base = info->baud; + tmp.custom_divisor = info->custom_divisor; + tmp.hub6 = 0; /*!!! */ + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} /* get_serial_info */ static int -set_serial_info(struct cyclades_port * info, - struct serial_struct __user * new_info) +set_serial_info(struct cyclades_port *info, + struct serial_struct __user * new_info) { - struct serial_struct new_serial; - struct cyclades_port old_info; - - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.close_delay != info->close_delay) || - (new_serial.baud_base != info->baud) || - ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != - (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->baud = new_serial.baud_base; - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud = new_serial.baud_base; - info->custom_divisor = new_serial.custom_divisor; - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ/100; - info->closing_wait = new_serial.closing_wait * HZ/100; + struct serial_struct new_serial; + struct cyclades_port old_info; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if (new_serial.close_delay != info->close_delay || + new_serial.baud_base != info->baud || + (new_serial.flags & ASYNC_FLAGS & + ~ASYNC_USR_MASK) != + (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + return -EPERM; + info->flags = (info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK); + info->baud = new_serial.baud_base; + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud = new_serial.baud_base; + info->custom_divisor = new_serial.custom_divisor; + info->flags = (info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS); + info->close_delay = new_serial.close_delay * HZ / 100; + info->closing_wait = new_serial.closing_wait * HZ / 100; check_and_exit: - if (info->flags & ASYNC_INITIALIZED){ - set_line_char(info); - return 0; - }else{ - return startup(info); - } -} /* set_serial_info */ + if (info->flags & ASYNC_INITIALIZED) { + set_line_char(info); + return 0; + } else { + return startup(info); + } +} /* set_serial_info */ /* * get_lsr_info - get line status register info @@ -3478,441 +3572,452 @@ check_and_exit: * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) +static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) { - int card, chip, channel, index; - unsigned char status; - unsigned int result; - unsigned long flags; - void __iomem *base_addr; - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = (info->line) - (cy_card[card].first_line); + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + + CY_LOCK(info, flags); + status = cy_readb(base_addr + (CySRER << index)) & + (CyTxRdy | CyTxMpty); + CY_UNLOCK(info, flags); + result = (status ? 0 : TIOCSER_TEMT); + } else { + /* Not supported yet */ + return -EINVAL; + } + return put_user(result, (unsigned long __user *)value); } -static int -cy_tiocmget(struct tty_struct *tty, struct file *file) +static int cy_tiocmget(struct tty_struct *tty, struct file *file) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - int card,chip,channel,index; - void __iomem *base_addr; - unsigned long flags; - unsigned char status; - unsigned long lstatus; - unsigned int result; - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) - return -ENODEV; - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<driver_data; + int card, chip, channel, index; + void __iomem *base_addr; + unsigned long flags; + unsigned char status; + unsigned long lstatus; + unsigned int result; + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCAR<card; + channel = (info->line) - (cy_card[card].first_line); + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); - if (info->rtsdtr_inv) { - result = ((status & CyRTS) ? TIOCM_DTR : 0) - | ((status & CyDTR) ? TIOCM_RTS : 0); + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), (u_char) channel); + status = cy_readb(base_addr + (CyMSVR1 << index)); + status |= cy_readb(base_addr + (CyMSVR2 << index)); + CY_UNLOCK(info, flags); + + if (info->rtsdtr_inv) { + result = ((status & CyRTS) ? TIOCM_DTR : 0) | + ((status & CyDTR) ? TIOCM_RTS : 0); + } else { + result = ((status & CyRTS) ? TIOCM_RTS : 0) | + ((status & CyDTR) ? TIOCM_DTR : 0); + } + result |= ((status & CyDCD) ? TIOCM_CAR : 0) | + ((status & CyRI) ? TIOCM_RNG : 0) | + ((status & CyDSR) ? TIOCM_DSR : 0) | + ((status & CyCTS) ? TIOCM_CTS : 0); } else { - result = ((status & CyRTS) ? TIOCM_RTS : 0) - | ((status & CyDTR) ? TIOCM_DTR : 0); - } - result |= ((status & CyDCD) ? TIOCM_CAR : 0) - | ((status & CyRI) ? TIOCM_RNG : 0) - | ((status & CyDSR) ? TIOCM_DSR : 0) - | ((status & CyCTS) ? TIOCM_CTS : 0); - } else { - base_addr = cy_card[card].base_addr; - - if (cy_card[card].num_chips != -1){ - return -EINVAL; - } + base_addr = cy_card[card].base_addr; - firm_id = cy_card[card].base_addr + ID_ADDRESS; - if (ISZLOADED(cy_card[card])) { - zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = zfw_ctrl->ch_ctrl; - lstatus = cy_readl(&ch_ctrl[channel].rs_status); - result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) - | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) - | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) - | ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) - | ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) - | ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); - }else{ - result = 0; - return -ENODEV; - } + if (cy_card[card].num_chips != -1) { + return -EINVAL; + } - } - return result; -} /* cy_tiomget */ + firm_id = cy_card[card].base_addr + ID_ADDRESS; + if (ISZLOADED(cy_card[card])) { + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = zfw_ctrl->ch_ctrl; + lstatus = cy_readl(&ch_ctrl[channel].rs_status); + result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | + ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | + ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | + ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | + ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | + ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); + } else { + result = 0; + return -ENODEV; + } + } + return result; +} /* cy_tiomget */ static int cy_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) + unsigned int set, unsigned int clear) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - int card,chip,channel,index; - void __iomem *base_addr; - unsigned long flags; - struct FIRM_ID __iomem *firm_id; - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - struct CH_CTRL __iomem *ch_ctrl; - int retval; - - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) - return -ENODEV; - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR2<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR2<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR1<driver_data; + int card, chip, channel, index; + void __iomem *base_addr; + unsigned long flags; + struct FIRM_ID __iomem *firm_id; + struct ZFW_CTRL __iomem *zfw_ctrl; + struct BOARD_CTRL __iomem *board_ctrl; + struct CH_CTRL __iomem *ch_ctrl; + int retval; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + + card = info->card; + channel = (info->line) - (cy_card[card].first_line); + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + + if (set & TIOCM_RTS) { + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR2 << index), + CyDTR); + } else { + cy_writeb(base_addr + (CyMSVR1 << index), + CyRTS); + } + CY_UNLOCK(info, flags); + } + if (clear & TIOCM_RTS) { + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR2 << index), + ~CyDTR); + } else { + cy_writeb(base_addr + (CyMSVR1 << index), + ~CyRTS); + } + CY_UNLOCK(info, flags); + } + if (set & TIOCM_DTR) { + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR1 << index), + CyRTS); + } else { + cy_writeb(base_addr + (CyMSVR2 << index), + CyDTR); + } #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR1<rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR1 << index), + ~CyRTS); + } else { + cy_writeb(base_addr + (CyMSVR2 << index), + ~CyDTR); + } #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr+(CyMSVR1<zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; - ch_ctrl = zfw_ctrl->ch_ctrl; - - if (set & TIOCM_RTS){ - CY_LOCK(info, flags); - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS); - CY_UNLOCK(info, flags); - } - if (clear & TIOCM_RTS) { - CY_LOCK(info, flags); - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_RTS); - CY_UNLOCK(info, flags); - } - if (set & TIOCM_DTR){ - CY_LOCK(info, flags); - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) | C_RS_DTR); + CY_UNLOCK(info, flags); + } + } else { + base_addr = cy_card[card].base_addr; + + firm_id = cy_card[card].base_addr + ID_ADDRESS; + if (ISZLOADED(cy_card[card])) { + zfw_ctrl = cy_card[card].base_addr + + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + board_ctrl = &zfw_ctrl->board_ctrl; + ch_ctrl = zfw_ctrl->ch_ctrl; + + if (set & TIOCM_RTS) { + CY_LOCK(info, flags); + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel]. + rs_control) | C_RS_RTS); + CY_UNLOCK(info, flags); + } + if (clear & TIOCM_RTS) { + CY_LOCK(info, flags); + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel]. + rs_control) & ~C_RS_RTS); + CY_UNLOCK(info, flags); + } + if (set & TIOCM_DTR) { + CY_LOCK(info, flags); + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel]. + rs_control) | C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info raising Z DTR\n"); + printk("cyc:set_modem_info raising Z DTR\n"); #endif - CY_UNLOCK(info, flags); - } - if (clear & TIOCM_DTR) { - CY_LOCK(info, flags); - cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_DTR); + CY_UNLOCK(info, flags); + } + if (clear & TIOCM_DTR) { + CY_LOCK(info, flags); + cy_writel(&ch_ctrl[channel].rs_control, + cy_readl(&ch_ctrl[channel]. + rs_control) & ~C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info clearing Z DTR\n"); + printk("cyc:set_modem_info clearing Z DTR\n"); #endif - CY_UNLOCK(info, flags); - } - }else{ - return -ENODEV; - } - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM,0L); - if (retval != 0){ - printk("cyc:set_modem_info retval on ttyC%d was %x\n", - info->line, retval); + CY_UNLOCK(info, flags); + } + } else { + return -ENODEV; + } + CY_LOCK(info, flags); + retval = cyz_issue_cmd(&cy_card[info->card], + channel, C_CM_IOCTLM, 0L); + if (retval != 0) { + printk("cyc:set_modem_info retval on ttyC%d was %x\n", + info->line, retval); + } + CY_UNLOCK(info, flags); } - CY_UNLOCK(info, flags); - } - return 0; -} /* cy_tiocmset */ + return 0; +} /* cy_tiocmset */ /* * cy_break() --- routine which turns the break handling on or off */ -static void -cy_break(struct tty_struct *tty, int break_state) +static void cy_break(struct tty_struct *tty, int break_state) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; - if (serial_paranoia_check(info, tty->name, "cy_break")) - return; + if (serial_paranoia_check(info, tty->name, "cy_break")) + return; - CY_LOCK(info, flags); - if (!IS_CYC_Z(cy_card[info->card])) { - /* Let the transmit ISR take care of this (since it - requires stuffing characters into the output stream). - */ - if (break_state == -1) { - if (!info->breakon) { - info->breakon = 1; - if (!info->xmit_cnt) { - CY_UNLOCK(info, flags); - start_xmit(info); - CY_LOCK(info, flags); + CY_LOCK(info, flags); + if (!IS_CYC_Z(cy_card[info->card])) { + /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + if (break_state == -1) { + if (!info->breakon) { + info->breakon = 1; + if (!info->xmit_cnt) { + CY_UNLOCK(info, flags); + start_xmit(info); + CY_LOCK(info, flags); + } + } + } else { + if (!info->breakoff) { + info->breakoff = 1; + if (!info->xmit_cnt) { + CY_UNLOCK(info, flags); + start_xmit(info); + CY_LOCK(info, flags); + } + } } - } } else { - if (!info->breakoff) { - info->breakoff = 1; - if (!info->xmit_cnt) { - CY_UNLOCK(info, flags); - start_xmit(info); - CY_LOCK(info, flags); + int retval; + + if (break_state == -1) { + retval = cyz_issue_cmd(&cy_card[info->card], + info->line - cy_card[info->card].first_line, + C_CM_SET_BREAK, 0L); + if (retval != 0) { + printk("cyc:cy_break (set) retval on ttyC%d " + "was %x\n", info->line, retval); + } + } else { + retval = cyz_issue_cmd(&cy_card[info->card], + info->line - cy_card[info->card].first_line, + C_CM_CLR_BREAK, 0L); + if (retval != 0) { + printk("cyc:cy_break (clr) retval on ttyC%d " + "was %x\n", info->line, retval); + } } - } - } - } else { - int retval; - - if (break_state == -1) { - retval = cyz_issue_cmd(&cy_card[info->card], - (info->line) - (cy_card[info->card].first_line), - C_CM_SET_BREAK, 0L); - if (retval != 0) { - printk("cyc:cy_break (set) retval on ttyC%d was %x\n", - info->line, retval); - } - } else { - retval = cyz_issue_cmd(&cy_card[info->card], - (info->line) - (cy_card[info->card].first_line), - C_CM_CLR_BREAK, 0L); - if (retval != 0) { - printk("cyc:cy_break (clr) retval on ttyC%d was %x\n", - info->line, retval); - } } - } - CY_UNLOCK(info, flags); -} /* cy_break */ + CY_UNLOCK(info, flags); +} /* cy_break */ static int -get_mon_info(struct cyclades_port * info, struct cyclades_monitor __user * mon) +get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) { - if(copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) - return -EFAULT; - info->mon.int_count = 0; - info->mon.char_count = 0; - info->mon.char_max = 0; - info->mon.char_last = 0; - return 0; -}/* get_mon_info */ - + if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) + return -EFAULT; + info->mon.int_count = 0; + info->mon.char_count = 0; + info->mon.char_max = 0; + info->mon.char_last = 0; + return 0; +} /* get_mon_info */ -static int -set_threshold(struct cyclades_port * info, unsigned long value) +static int set_threshold(struct cyclades_port *info, unsigned long value) { - void __iomem *base_addr; - int card,channel,chip,index; - unsigned long flags; - - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<cor3 &= ~CyREC_FIFO; - info->cor3 |= value & CyREC_FIFO; + void __iomem *base_addr; + int card, channel, chip, index; + unsigned long flags; - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCOR3<cor3); - cyy_issue_cmd(base_addr,CyCOR_CHANGE|CyCOR3ch,index); - CY_UNLOCK(info, flags); - } else { - // Nothing to do! - } - return 0; -}/* set_threshold */ + card = info->card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + + info->cor3 &= ~CyREC_FIFO; + info->cor3 |= value & CyREC_FIFO; + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCOR3 << index), info->cor3); + cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index); + CY_UNLOCK(info, flags); + } else { + // Nothing to do! + } + return 0; +} /* set_threshold */ static int -get_threshold(struct cyclades_port * info, unsigned long __user *value) +get_threshold(struct cyclades_port *info, unsigned long __user * value) { - void __iomem *base_addr; - int card,channel,chip,index; - unsigned long tmp; - - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + + tmp = cy_readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO; + return put_user(tmp, value); + } else { + // Nothing to do! + return 0; + } +} /* get_threshold */ static int -set_default_threshold(struct cyclades_port * info, unsigned long value) +set_default_threshold(struct cyclades_port *info, unsigned long value) { - info->default_threshold = value & 0x0f; - return 0; -}/* set_default_threshold */ - + info->default_threshold = value & 0x0f; + return 0; +} /* set_default_threshold */ static int -get_default_threshold(struct cyclades_port * info, unsigned long __user *value) +get_default_threshold(struct cyclades_port *info, unsigned long __user * value) { - return put_user(info->default_threshold,value); -}/* get_default_threshold */ + return put_user(info->default_threshold, value); +} /* get_default_threshold */ - -static int -set_timeout(struct cyclades_port * info, unsigned long value) +static int set_timeout(struct cyclades_port *info, unsigned long value) { - void __iomem *base_addr; - int card,channel,chip,index; - unsigned long flags; - - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyRTPR << index), value & 0xff); + CY_UNLOCK(info, flags); + } else { + // Nothing to do! + } + return 0; +} /* set_timeout */ -static int -get_timeout(struct cyclades_port * info, unsigned long __user *value) +static int get_timeout(struct cyclades_port *info, unsigned long __user * value) { - void __iomem *base_addr; - int card,channel,chip,index; - unsigned long tmp; - - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = + cy_card[card].base_addr + (cy_chip_offset[chip] << index); + + tmp = cy_readb(base_addr + (CyRTPR << index)); + return put_user(tmp, value); + } else { + // Nothing to do! + return 0; + } +} /* get_timeout */ -static int -set_default_timeout(struct cyclades_port * info, unsigned long value) +static int set_default_timeout(struct cyclades_port *info, unsigned long value) { - info->default_timeout = value & 0xff; - return 0; -}/* set_default_timeout */ - + info->default_timeout = value & 0xff; + return 0; +} /* set_default_timeout */ static int -get_default_timeout(struct cyclades_port * info, unsigned long __user *value) +get_default_timeout(struct cyclades_port *info, unsigned long __user * value) { - return put_user(info->default_timeout,value); -}/* get_default_timeout */ + return put_user(info->default_timeout, value); +} /* get_default_timeout */ /* * This routine allows the tty driver to implement device- @@ -3920,184 +4025,193 @@ get_default_timeout(struct cyclades_port * info, unsigned long __user *value) * not recognized by the driver, it should return ENOIOCTLCMD. */ static int -cy_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) +cy_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - struct cyclades_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - int ret_val = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if (serial_paranoia_check(info, tty->name, "cy_ioctl")) - return -ENODEV; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_icount cprev, cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + int ret_val = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (serial_paranoia_check(info, tty->name, "cy_ioctl")) + return -ENODEV; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", - info->line, cmd, arg); /* */ + printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */ #endif - switch (cmd) { - case CYGETMON: - ret_val = get_mon_info(info, argp); - break; - case CYGETTHRESH: - ret_val = get_threshold(info, argp); - break; - case CYSETTHRESH: - ret_val = set_threshold(info, arg); - break; - case CYGETDEFTHRESH: - ret_val = get_default_threshold(info, argp); - break; - case CYSETDEFTHRESH: - ret_val = set_default_threshold(info, arg); - break; - case CYGETTIMEOUT: - ret_val = get_timeout(info, argp); - break; - case CYSETTIMEOUT: - ret_val = set_timeout(info, arg); - break; - case CYGETDEFTIMEOUT: - ret_val = get_default_timeout(info, argp); - break; - case CYSETDEFTIMEOUT: - ret_val = set_default_timeout(info, arg); - break; + switch (cmd) { + case CYGETMON: + ret_val = get_mon_info(info, argp); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, argp); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, arg); + break; + case CYGETDEFTHRESH: + ret_val = get_default_threshold(info, argp); + break; + case CYSETDEFTHRESH: + ret_val = set_default_threshold(info, arg); + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, argp); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, arg); + break; + case CYGETDEFTIMEOUT: + ret_val = get_default_timeout(info, argp); + break; + case CYSETDEFTIMEOUT: + ret_val = set_default_timeout(info, arg); + break; case CYSETRFLOW: - info->rflow = (int)arg; - ret_val = 0; - break; + info->rflow = (int)arg; + ret_val = 0; + break; case CYGETRFLOW: - ret_val = info->rflow; - break; + ret_val = info->rflow; + break; case CYSETRTSDTR_INV: - info->rtsdtr_inv = (int)arg; - ret_val = 0; - break; + info->rtsdtr_inv = (int)arg; + ret_val = 0; + break; case CYGETRTSDTR_INV: - ret_val = info->rtsdtr_inv; - break; + ret_val = info->rtsdtr_inv; + break; case CYGETCARDINFO: - if (copy_to_user(argp, &cy_card[info->card], - sizeof (struct cyclades_card))) { - ret_val = -EFAULT; + if (copy_to_user(argp, &cy_card[info->card], + sizeof(struct cyclades_card))) { + ret_val = -EFAULT; + break; + } + ret_val = 0; break; - } - ret_val = 0; - break; case CYGETCD1400VER: - ret_val = info->chip_rev; - break; + ret_val = info->chip_rev; + break; #ifndef CONFIG_CYZ_INTR case CYZSETPOLLCYCLE: - cyz_polling_cycle = (arg * HZ) / 1000; - ret_val = 0; - break; + cyz_polling_cycle = (arg * HZ) / 1000; + ret_val = 0; + break; case CYZGETPOLLCYCLE: - ret_val = (cyz_polling_cycle * 1000) / HZ; - break; -#endif /* CONFIG_CYZ_INTR */ + ret_val = (cyz_polling_cycle * 1000) / HZ; + break; +#endif /* CONFIG_CYZ_INTR */ case CYSETWAIT: - info->closing_wait = (unsigned short)arg * HZ/100; - ret_val = 0; - break; + info->closing_wait = (unsigned short)arg *HZ / 100; + ret_val = 0; + break; case CYGETWAIT: - ret_val = info->closing_wait / (HZ/100); - break; - case TIOCGSERIAL: - ret_val = get_serial_info(info, argp); - break; - case TIOCSSERIAL: - ret_val = set_serial_info(info, argp); - break; - case TIOCSERGETLSR: /* Get line status register */ - ret_val = get_lsr_info(info, argp); - break; - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ + ret_val = info->closing_wait / (HZ / 100); + break; + case TIOCGSERIAL: + ret_val = get_serial_info(info, argp); + break; + case TIOCSSERIAL: + ret_val = set_serial_info(info, argp); + break; + case TIOCSERGETLSR: /* Get line status register */ + ret_val = get_lsr_info(info, argp); + break; + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ case TIOCMIWAIT: - CY_LOCK(info, flags); - /* note the counters on entry */ - cprev = info->icount; - CY_UNLOCK(info, flags); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) { - return -ERESTARTSYS; - } - CY_LOCK(info, flags); - cnow = info->icount; /* atomic copy */ + /* note the counters on entry */ + cprev = info->icount; CY_UNLOCK(info, flags); + while (1) { + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) { + return -ERESTARTSYS; + } - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - return -EIO; /* no change => error */ - } - if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; + CY_LOCK(info, flags); + cnow = info->icount; /* atomic copy */ + CY_UNLOCK(info, flags); + + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + return -EIO; /* no change => error */ + } + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; + } + cprev = cnow; } - cprev = cnow; - } - /* NOTREACHED */ + /* NOTREACHED */ - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ case TIOCGICOUNT: - CY_LOCK(info, flags); - cnow = info->icount; - CY_UNLOCK(info, flags); - p_cuser = argp; - ret_val = put_user(cnow.cts, &p_cuser->cts); - if (ret_val) return ret_val; - ret_val = put_user(cnow.dsr, &p_cuser->dsr); - if (ret_val) return ret_val; - ret_val = put_user(cnow.rng, &p_cuser->rng); - if (ret_val) return ret_val; - ret_val = put_user(cnow.dcd, &p_cuser->dcd); - if (ret_val) return ret_val; - ret_val = put_user(cnow.rx, &p_cuser->rx); - if (ret_val) return ret_val; - ret_val = put_user(cnow.tx, &p_cuser->tx); - if (ret_val) return ret_val; - ret_val = put_user(cnow.frame, &p_cuser->frame); - if (ret_val) return ret_val; - ret_val = put_user(cnow.overrun, &p_cuser->overrun); - if (ret_val) return ret_val; - ret_val = put_user(cnow.parity, &p_cuser->parity); - if (ret_val) return ret_val; - ret_val = put_user(cnow.brk, &p_cuser->brk); - if (ret_val) return ret_val; - ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); - if (ret_val) return ret_val; - ret_val = 0; - break; - default: - ret_val = -ENOIOCTLCMD; - } + CY_LOCK(info, flags); + cnow = info->icount; + CY_UNLOCK(info, flags); + p_cuser = argp; + ret_val = put_user(cnow.cts, &p_cuser->cts); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.dsr, &p_cuser->dsr); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.rng, &p_cuser->rng); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.dcd, &p_cuser->dcd); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.rx, &p_cuser->rx); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.tx, &p_cuser->tx); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.frame, &p_cuser->frame); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.overrun, &p_cuser->overrun); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.parity, &p_cuser->parity); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.brk, &p_cuser->brk); + if (ret_val) + return ret_val; + ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); + if (ret_val) + return ret_val; + ret_val = 0; + break; + default: + ret_val = -ENOIOCTLCMD; + } #ifdef CY_DEBUG_OTHER - printk(" cyc:cy_ioctl done\n"); + printk(" cyc:cy_ioctl done\n"); #endif - return ret_val; -} /* cy_ioctl */ - + return ret_val; +} /* cy_ioctl */ /* * This routine allows the tty driver to be notified when @@ -4105,66 +4219,66 @@ cy_ioctl(struct tty_struct *tty, struct file * file, * well-designed tty driver should be prepared to accept the case * where old == NULL, and try to do something rational. */ -static void -cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios) +static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_set_termios ttyC%d\n", info->line); + printk("cyc:cy_set_termios ttyC%d\n", info->line); #endif - if ((tty->termios->c_cflag == old_termios->c_cflag) && - ((tty->termios->c_iflag & (IXON|IXANY)) == - (old_termios->c_iflag & (IXON|IXANY)))) - return; - set_line_char(info); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - cy_start(tty); - } + if (tty->termios->c_cflag == old_termios->c_cflag && + (tty->termios->c_iflag & (IXON | IXANY)) == + (old_termios->c_iflag & (IXON | IXANY))) + return; + set_line_char(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + cy_start(tty); + } #if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); #endif - return; -} /* cy_set_termios */ + return; +} /* cy_set_termios */ /* This function is used to send a high-priority XON/XOFF character to the device. */ -static void -cy_send_xchar (struct tty_struct *tty, char ch) +static void cy_send_xchar(struct tty_struct *tty, char ch) { - struct cyclades_port *info = (struct cyclades_port *) tty->driver_data; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; int card, channel; - if (serial_paranoia_check (info, tty->name, "cy_send_xchar")) + if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) return; - info->x_char = ch; + info->x_char = ch; if (ch) - cy_start (tty); + cy_start(tty); card = info->card; channel = info->line - cy_card[card].first_line; - if (IS_CYC_Z (cy_card[card])) { - if (ch == STOP_CHAR (tty)) - cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXOFF, 0L); - else if (ch == START_CHAR (tty)) - cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXON, 0L); + if (IS_CYC_Z(cy_card[card])) { + if (ch == STOP_CHAR(tty)) + cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXOFF, + 0L); + else if (ch == START_CHAR(tty)) + cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXON, + 0L); } } @@ -4172,260 +4286,256 @@ cy_send_xchar (struct tty_struct *tty, char ch) that incoming characters should be throttled because the input buffers are close to full. */ -static void -cy_throttle(struct tty_struct * tty) +static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - void __iomem *base_addr; - int card,chip,channel,index; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + void __iomem *base_addr; + int card, chip, channel, index; #ifdef CY_DEBUG_THROTTLE - char buf[64]; + char buf[64]; - printk("cyc:throttle %s: %d....ttyC%d\n", - tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty), info->line); + printk("cyc:throttle %s: %d....ttyC%d\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty), info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_throttle")){ - return; - } - - card = info->card; - - if (I_IXOFF(tty)) { - if (!IS_CYC_Z (cy_card[card])) - cy_send_xchar (tty, STOP_CHAR (tty)); - else - info->throttle = 1; - } - - if (tty->termios->c_cflag & CRTSCTS) { - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR2<throttle = 1; - } - } + if (serial_paranoia_check(info, tty->name, "cy_throttle")) { + return; + } + + card = info->card; + + if (I_IXOFF(tty)) { + if (!IS_CYC_Z(cy_card[card])) + cy_send_xchar(tty, STOP_CHAR(tty)); + else + info->throttle = 1; + } - return; -} /* cy_throttle */ + if (tty->termios->c_cflag & CRTSCTS) { + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); + + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR2 << index), + ~CyDTR); + } else { + cy_writeb(base_addr + (CyMSVR1 << index), + ~CyRTS); + } + CY_UNLOCK(info, flags); + } else { + info->throttle = 1; + } + } + return; +} /* cy_throttle */ /* * This routine notifies the tty driver that it should signal * that characters can now be sent to the tty without fear of * overrunning the input buffers of the line disciplines. */ -static void -cy_unthrottle(struct tty_struct * tty) +static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - void __iomem *base_addr; - int card,chip,channel,index; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + void __iomem *base_addr; + int card, chip, channel, index; #ifdef CY_DEBUG_THROTTLE - char buf[64]; - - printk("cyc:unthrottle %s: %d....ttyC%d\n", - tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty), info->line); + char buf[64]; + + printk("cyc:unthrottle %s: %d....ttyC%d\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty), info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_unthrottle")){ - return; - } + if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) { + return; + } - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - cy_send_xchar (tty, START_CHAR (tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { - chip = channel>>2; - channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<rtsdtr_inv) { - cy_writeb(base_addr+(CyMSVR2<throttle = 0; + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + cy_send_xchar(tty, START_CHAR(tty)); } - } - return; -} /* cy_unthrottle */ + if (tty->termios->c_cflag & CRTSCTS) { + card = info->card; + channel = info->line - cy_card[card].first_line; + if (!IS_CYC_Z(cy_card[card])) { + chip = channel >> 2; + channel &= 0x03; + index = cy_card[card].bus_index; + base_addr = cy_card[card].base_addr + + (cy_chip_offset[chip] << index); + + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char) channel); + if (info->rtsdtr_inv) { + cy_writeb(base_addr + (CyMSVR2 << index), + CyDTR); + } else { + cy_writeb(base_addr + (CyMSVR1 << index), + CyRTS); + } + CY_UNLOCK(info, flags); + } else { + info->throttle = 0; + } + } + return; +} /* cy_unthrottle */ /* cy_start and cy_stop provide software output flow control as a function of XON/XOFF, software CTS, and other such stuff. */ -static void -cy_stop(struct tty_struct *tty) +static void cy_stop(struct tty_struct *tty) { - struct cyclades_card *cinfo; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - void __iomem *base_addr; - int chip,channel,index; - unsigned long flags; + struct cyclades_card *cinfo; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + void __iomem *base_addr; + int chip, channel, index; + unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_stop ttyC%d\n", info->line); /* */ + printk("cyc:cy_stop ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_stop")) - return; - - cinfo = &cy_card[info->card]; - channel = info->line - cinfo->first_line; - if (!IS_CYC_Z(*cinfo)) { - index = cinfo->bus_index; - chip = channel>>2; - channel &= 0x03; - base_addr = cy_card[info->card].base_addr + (cy_chip_offset[chip]<name, "cy_stop")) + return; - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCAR<card]; + channel = info->line - cinfo->first_line; + if (!IS_CYC_Z(*cinfo)) { + index = cinfo->bus_index; + chip = channel >> 2; + channel &= 0x03; + base_addr = cy_card[info->card].base_addr + + (cy_chip_offset[chip] << index); - return; -} /* cy_stop */ + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), + (u_char)(channel & 0x0003)); /* index channel */ + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) & ~CyTxRdy); + CY_UNLOCK(info, flags); + } else { + // Nothing to do! + } + return; +} /* cy_stop */ -static void -cy_start(struct tty_struct *tty) +static void cy_start(struct tty_struct *tty) { - struct cyclades_card *cinfo; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - void __iomem *base_addr; - int chip,channel,index; - unsigned long flags; + struct cyclades_card *cinfo; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + void __iomem *base_addr; + int chip, channel, index; + unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_start ttyC%d\n", info->line); /* */ + printk("cyc:cy_start ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_start")) - return; - - cinfo = &cy_card[info->card]; - channel = info->line - cinfo->first_line; - index = cinfo->bus_index; - if (!IS_CYC_Z(*cinfo)) { - chip = channel>>2; - channel &= 0x03; - base_addr = cy_card[info->card].base_addr + (cy_chip_offset[chip]<name, "cy_start")) + return; - CY_LOCK(info, flags); - cy_writeb(base_addr+(CyCAR<card]; + channel = info->line - cinfo->first_line; + index = cinfo->bus_index; + if (!IS_CYC_Z(*cinfo)) { + chip = channel >> 2; + channel &= 0x03; + base_addr = cy_card[info->card].base_addr + + (cy_chip_offset[chip] << index); - return; -} /* cy_start */ + CY_LOCK(info, flags); + cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */ + cy_writeb(base_addr + (CySRER << index), + cy_readb(base_addr + (CySRER << index)) | CyTxRdy); + CY_UNLOCK(info, flags); + } else { + // Nothing to do! + } + return; +} /* cy_start */ -static void -cy_flush_buffer(struct tty_struct *tty) +static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, channel, retval; - unsigned long flags; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int card, channel, retval; + unsigned long flags; + #ifdef CY_DEBUG_IO - printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */ + printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) - return; - - card = info->card; - channel = (info->line) - (cy_card[card].first_line); + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; - CY_LOCK(info, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - CY_UNLOCK(info, flags); + card = info->card; + channel = (info->line) - (cy_card[card].first_line); - if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board - buffers as well */ CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L); - if (retval != 0) { - printk("cyc: flush_buffer retval on ttyC%d was %x\n", - info->line, retval); - } + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; CY_UNLOCK(info, flags); - } - tty_wakeup(tty); - wake_up_interruptible(&tty->write_wait); -} /* cy_flush_buffer */ + if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board + buffers as well */ + CY_LOCK(info, flags); + retval = + cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L); + if (retval != 0) { + printk("cyc: flush_buffer retval on ttyC%d was %x\n", + info->line, retval); + } + CY_UNLOCK(info, flags); + } + tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); +} /* cy_flush_buffer */ /* * cy_hangup() --- called by tty_hangup() when a hangup is signaled. */ -static void -cy_hangup(struct tty_struct *tty) +static void cy_hangup(struct tty_struct *tty) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + #ifdef CY_DEBUG_OTHER - printk("cyc:cy_hangup ttyC%d\n", info->line); /* */ + printk("cyc:cy_hangup ttyC%d\n", info->line); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_hangup")) - return; + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; - cy_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; + cy_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; #ifdef CY_DEBUG_COUNT - printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid); + printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid); #endif - info->tty = NULL; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - wake_up_interruptible(&info->open_wait); -} /* cy_hangup */ - + info->tty = NULL; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + wake_up_interruptible(&info->open_wait); +} /* cy_hangup */ /* * --------------------------------------------------------------------- @@ -4438,82 +4548,84 @@ cy_hangup(struct tty_struct *tty) /* initialize chips on Cyclom-Y card -- return number of valid chips (which is number of ports/4) */ static unsigned short __init -cyy_init_card(void __iomem *true_base_addr,int index) +cyy_init_card(void __iomem * true_base_addr, int index) { - unsigned int chip_number; - void __iomem *base_addr; - - cy_writeb(true_base_addr+(Cy_HwReset<= CD1400_REV_J){ - /* It is a CD1400 rev. J or later */ - /* Impossible to reach 5ms with this chip. - Changed to 2ms instead (f = 500 Hz). */ - cy_writeb(base_addr+(CyPPR<= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + /* Impossible to reach 5ms with this chip. + Changed to 2ms instead (f = 500 Hz). */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); + } else { + /* f = 200 Hz */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); + } - /* - printk(" chip #%d at %#6lx is rev 0x%2x\n", - chip_number, (unsigned long)base_addr, - cy_readb(base_addr+(CyGFRCR< NR_PORTS) { - printk("Cyclom-Y/ISA found at 0x%lx ", - (unsigned long) cy_isa_address); - printk("but no more channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and recompile kernel.\n"); - return(nboard); - } - /* fill the next cy_card structure available */ - for (j = 0 ; j < NR_CARDS ; j++) { - if (cy_card[j].base_addr == 0) break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclom-Y/ISA found at 0x%lx ", - (unsigned long) cy_isa_address); - printk("but no more cards can be used .\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); - return(nboard); - } - - /* allocate IRQ */ - if(request_irq(cy_isa_irq, cyy_interrupt, - IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) - { - printk("Cyclom-Y/ISA found at 0x%lx ", - (unsigned long) cy_isa_address); - printk("but could not allocate IRQ#%d.\n", - cy_isa_irq); - return(nboard); - } - - /* set cy_card */ - cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr = NULL; - cy_card[j].irq = (int) cy_isa_irq; - cy_card[j].bus_index = 0; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan/4; - nboard++; - - /* print message */ - printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ", - j+1, (unsigned long) cy_isa_address, - (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), - cy_isa_irq); - printk("%d channels starting from port %d.\n", - cy_isa_nchan, cy_next_channel); - cy_next_channel += cy_isa_nchan; - } - return(nboard); + /* find out the board's irq by probing */ + cy_isa_irq = detect_isa_irq(cy_isa_address); + if (cy_isa_irq == 0) { + printk("Cyclom-Y/ISA found at 0x%lx ", + (unsigned long)cy_isa_address); + printk("but the IRQ could not be detected.\n"); + continue; + } + + if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) { + printk("Cyclom-Y/ISA found at 0x%lx ", + (unsigned long)cy_isa_address); + printk("but no more channels are available.\n"); + printk("Change NR_PORTS in cyclades.c and recompile " + "kernel.\n"); + return (nboard); + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + if (cy_card[j].base_addr == 0) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk("Cyclom-Y/ISA found at 0x%lx ", + (unsigned long)cy_isa_address); + printk("but no more cards can be used .\n"); + printk("Change NR_CARDS in cyclades.c and recompile " + "kernel.\n"); + return (nboard); + } + + /* allocate IRQ */ + if (request_irq(cy_isa_irq, cyy_interrupt, + IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { + printk("Cyclom-Y/ISA found at 0x%lx ", + (unsigned long)cy_isa_address); + printk("but could not allocate IRQ#%d.\n", cy_isa_irq); + return (nboard); + } + + /* set cy_card */ + cy_card[j].base_addr = cy_isa_address; + cy_card[j].ctl_addr = NULL; + cy_card[j].irq = (int)cy_isa_irq; + cy_card[j].bus_index = 0; + cy_card[j].first_line = cy_next_channel; + cy_card[j].num_chips = cy_isa_nchan / 4; + nboard++; + + /* print message */ + printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ", + j + 1, (unsigned long)cy_isa_address, + (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), + cy_isa_irq); + printk("%d channels starting from port %d.\n", + cy_isa_nchan, cy_next_channel); + cy_next_channel += cy_isa_nchan; + } + return (nboard); #else - return(0); -#endif /* CONFIG_ISA */ -} /* cy_detect_isa */ + return (0); +#endif /* CONFIG_ISA */ +} /* cy_detect_isa */ -static void -plx_init(void __iomem *addr, uclong initctl) +static void plx_init(void __iomem * addr, uclong initctl) { - /* Reset PLX */ - cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000); - udelay(100L); - cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x40000000); - - /* Reload Config. Registers from EEPROM */ - cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x20000000); - udelay(100L); - cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x20000000); + /* Reset PLX */ + cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000); + udelay(100L); + cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x40000000); + + /* Reload Config. Registers from EEPROM */ + cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x20000000); + udelay(100L); + cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x20000000); } /* @@ -4649,43 +4759,42 @@ plx_init(void __iomem *addr, uclong initctl) * sets global variables and return the number of PCI boards found. * --------------------------------------------------------------------- */ -static int __init -cy_detect_pci(void) +static int __init cy_detect_pci(void) { #ifdef CONFIG_PCI - struct pci_dev *pdev = NULL; - unsigned char cyy_rev_id; - unsigned char cy_pci_irq = 0; - uclong cy_pci_phys0, cy_pci_phys2; - void __iomem *cy_pci_addr0, *cy_pci_addr2; - unsigned short i,j,cy_pci_nchan, plx_ver; - unsigned short device_id,dev_index = 0; - uclong mailbox; - uclong ZeIndex = 0; - void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS]; - uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; - unsigned char Ze_irq[NR_CARDS]; - struct pci_dev *Ze_pdev[NR_CARDS]; - - for (i = 0; i < NR_CARDS; i++) { - /* look for a Cyclades card by vendor and device id */ - while((device_id = cy_pci_dev_id[dev_index]) != 0) { - if((pdev = pci_get_device(PCI_VENDOR_ID_CYCLADES, - device_id, pdev)) == NULL) { - dev_index++; /* try next device id */ - } else { - break; /* found a board */ - } - } + struct pci_dev *pdev = NULL; + unsigned char cyy_rev_id; + unsigned char cy_pci_irq = 0; + uclong cy_pci_phys0, cy_pci_phys2; + void __iomem *cy_pci_addr0, *cy_pci_addr2; + unsigned short i, j, cy_pci_nchan, plx_ver; + unsigned short device_id, dev_index = 0; + uclong mailbox; + uclong ZeIndex = 0; + void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS]; + uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; + unsigned char Ze_irq[NR_CARDS]; + struct pci_dev *Ze_pdev[NR_CARDS]; + + for (i = 0; i < NR_CARDS; i++) { + /* look for a Cyclades card by vendor and device id */ + while ((device_id = cy_pci_dev_id[dev_index]) != 0) { + if ((pdev = pci_get_device(PCI_VENDOR_ID_CYCLADES, + device_id, pdev)) == NULL) { + dev_index++; /* try next device id */ + } else { + break; /* found a board */ + } + } if (device_id == 0) - break; + break; if (pci_enable_device(pdev)) - continue; + continue; - /* read PCI configuration area */ + /* read PCI configuration area */ cy_pci_irq = pdev->irq; cy_pci_phys0 = pci_resource_start(pdev, 0); cy_pci_phys2 = pci_resource_start(pdev, 2); @@ -4693,482 +4802,509 @@ cy_detect_pci(void) device_id &= ~PCI_DEVICE_ID_MASK; - if ((device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) - || (device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi)){ + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { #ifdef CY_PCI_DEBUG - printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclom-Y/PCI:found winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); + printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", + pdev->bus->number, pdev->devfn); + printk("rev_id=%d) IRQ%d\n", + cyy_rev_id, (int)cy_pci_irq); + printk("Cyclom-Y/PCI:found winaddr=0x%lx " + "ctladdr=0x%lx\n", + (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); #endif - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - printk(" Warning: PCI I/O bit incorrectly set. " - "Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } - - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - if (pci_request_regions(pdev, "Cyclom-Y") != 0) { - printk(KERN_ERR "cyclades: failed to reserve PCI resources\n"); - continue; - } + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + printk(" Warning: PCI I/O bit incorrectly " + "set. Ignoring it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } + /* Although we don't use this I/O region, we should + request it from the kernel anyway, to avoid problems + with other drivers accessing it. */ + if (pci_request_regions(pdev, "Cyclom-Y") != 0) { + printk(KERN_ERR "cyclades: failed to reserve " + "PCI resources\n"); + continue; + } #if defined(__alpha__) - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ - printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclom-Y/PCI:found winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); - printk("Cyclom-Y/PCI not supported for low addresses in " - "Alpha systems.\n"); - i--; - continue; - } + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ + printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", + pdev->bus->number, pdev->devfn); + printk("rev_id=%d) IRQ%d\n", + cyy_rev_id, (int)cy_pci_irq); + printk("Cyclom-Y/PCI:found winaddr=0x%lx " + "ctladdr=0x%lx\n", + (ulong)cy_pci_phys2, + (ulong)cy_pci_phys0); + printk("Cyclom-Y/PCI not supported for low " + "addresses in Alpha systems.\n"); + i--; + continue; + } #endif - cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Yctl); - cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ywin); + cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Yctl); + cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ywin); #ifdef CY_PCI_DEBUG - printk("Cyclom-Y/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", - (u_long)cy_pci_addr2, (u_long)cy_pci_addr0); + printk("Cyclom-Y/PCI: relocate winaddr=0x%lx " + "ctladdr=0x%lx\n", + (u_long)cy_pci_addr2, (u_long)cy_pci_addr0); #endif - cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP * - cyy_init_card(cy_pci_addr2, 1)); - if(cy_pci_nchan == 0) { - printk("Cyclom-Y PCI host card with "); - printk("no Serial-Modules at 0x%lx.\n", - (ulong) cy_pci_phys2); - i--; - continue; - } - if((cy_next_channel+cy_pci_nchan) > NR_PORTS) { - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but no channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and recompile kernel.\n"); - return(i); - } - /* fill the next cy_card structure available */ - for (j = 0 ; j < NR_CARDS ; j++) { - if (cy_card[j].base_addr == 0) break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); - return(i); - } - - /* allocate IRQ */ - if(request_irq(cy_pci_irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", &cy_card[j])) - { - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but could not allocate IRQ%d.\n", - cy_pci_irq); - return(i); - } - - /* set cy_card */ - cy_card[j].base_phys = (ulong)cy_pci_phys2; - cy_card[j].ctl_phys = (ulong)cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int) cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_pci_nchan/4; - cy_card[j].pdev = pdev; - - /* enable interrupts in the PCI interface */ - plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f; - switch (plx_ver) { - case PLX_9050: - - cy_writeb(cy_pci_addr0+0x4c, 0x43); - break; - - case PLX_9060: - case PLX_9080: - default: /* Old boards, use PLX_9060 */ - - plx_init(cy_pci_addr0, 0x6c); - /* For some yet unknown reason, once the PLX9060 reloads - the EEPROM, the IRQ is lost and, thus, we have to - re-write it to the PCI config. registers. - This will remain here until we find a permanent fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, cy_pci_irq); - - cy_writew(cy_pci_addr0+0x68, - cy_readw(cy_pci_addr0+0x68)|0x0900); - break; - } + cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP * + cyy_init_card(cy_pci_addr2, 1)); + if (cy_pci_nchan == 0) { + printk("Cyclom-Y PCI host card with "); + printk("no Serial-Modules at 0x%lx.\n", + (ulong) cy_pci_phys2); + i--; + continue; + } + if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { + printk("Cyclom-Y/PCI found at 0x%lx ", + (ulong) cy_pci_phys2); + printk("but no channels are available.\n"); + printk("Change NR_PORTS in cyclades.c and " + "recompile kernel.\n"); + return (i); + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + if (cy_card[j].base_addr == 0) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk("Cyclom-Y/PCI found at 0x%lx ", + (ulong) cy_pci_phys2); + printk("but no more cards can be used.\n"); + printk("Change NR_CARDS in cyclades.c and " + "recompile kernel.\n"); + return (i); + } - /* print message */ - printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", - j+1, - (ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Ywin - 1), - (int)cy_pci_irq); - printk("%d channels starting from port %d.\n", - cy_pci_nchan, cy_next_channel); - - cy_next_channel += cy_pci_nchan; - }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo){ - /* print message */ - printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); - printk("Cyclades-Z/PCI not supported for low addresses\n"); - break; - }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi){ + /* allocate IRQ */ + if (request_irq(cy_pci_irq, cyy_interrupt, + IRQF_SHARED, "Cyclom-Y", &cy_card[j])) { + printk("Cyclom-Y/PCI found at 0x%lx ", + (ulong) cy_pci_phys2); + printk("but could not allocate IRQ%d.\n", + cy_pci_irq); + return (i); + } + + /* set cy_card */ + cy_card[j].base_phys = (ulong) cy_pci_phys2; + cy_card[j].ctl_phys = (ulong) cy_pci_phys0; + cy_card[j].base_addr = cy_pci_addr2; + cy_card[j].ctl_addr = cy_pci_addr0; + cy_card[j].irq = (int)cy_pci_irq; + cy_card[j].bus_index = 1; + cy_card[j].first_line = cy_next_channel; + cy_card[j].num_chips = cy_pci_nchan / 4; + cy_card[j].pdev = pdev; + + /* enable interrupts in the PCI interface */ + plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f; + switch (plx_ver) { + case PLX_9050: + + cy_writeb(cy_pci_addr0 + 0x4c, 0x43); + break; + + case PLX_9060: + case PLX_9080: + default: /* Old boards, use PLX_9060 */ + + plx_init(cy_pci_addr0, 0x6c); + /* For some yet unknown reason, once the PLX9060 reloads + the EEPROM, the IRQ is lost and, thus, we have to + re-write it to the PCI config. registers. + This will remain here until we find a permanent + fix. */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, + cy_pci_irq); + + cy_writew(cy_pci_addr0 + 0x68, + cy_readw(cy_pci_addr0 + + 0x68) | 0x0900); + break; + } + + /* print message */ + printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", + j + 1, (ulong)cy_pci_phys2, + (ulong) (cy_pci_phys2 + CyPCI_Ywin - 1), + (int)cy_pci_irq); + printk("%d channels starting from port %d.\n", + cy_pci_nchan, cy_next_channel); + + cy_next_channel += cy_pci_nchan; + } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { + /* print message */ + printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", + pdev->bus->number, pdev->devfn); + printk("rev_id=%d) IRQ%d\n", + cyy_rev_id, (int)cy_pci_irq); + printk("Cyclades-Z/PCI: found winaddr=0x%lx " + "ctladdr=0x%lx\n", + (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); + printk("Cyclades-Z/PCI not supported for low " + "addresses\n"); + break; + } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { #ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); + printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", + pdev->bus->number, pdev->devfn); + printk("rev_id=%d) IRQ%d\n", + cyy_rev_id, (int)cy_pci_irq); + printk("Cyclades-Z/PCI: found winaddr=0x%lx " + "ctladdr=0x%lx\n", + (ulong) cy_pci_phys2, (ulong) cy_pci_phys0); #endif - cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Zctl); - - /* Disable interrupts on the PLX before resetting it */ - cy_writew(cy_pci_addr0+0x68, - cy_readw(cy_pci_addr0+0x68) & ~0x0900); - - plx_init(cy_pci_addr0, 0x6c); - /* For some yet unknown reason, once the PLX9060 reloads - the EEPROM, the IRQ is lost and, thus, we have to - re-write it to the PCI config. registers. - This will remain here until we find a permanent fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, cy_pci_irq); - - mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_pci_addr0)->mail_box_0); - - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - printk(" Warning: PCI I/O bit incorrectly set. " - "Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } + cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Zctl); + + /* Disable interrupts on the PLX before resetting it */ + cy_writew(cy_pci_addr0 + 0x68, + cy_readw(cy_pci_addr0 + 0x68) & ~0x0900); + + plx_init(cy_pci_addr0, 0x6c); + /* For some yet unknown reason, once the PLX9060 reloads + the EEPROM, the IRQ is lost and, thus, we have to + re-write it to the PCI config. registers. + This will remain here until we find a permanent + fix. */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, + cy_pci_irq); + + mailbox = + (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) + cy_pci_addr0)->mail_box_0); + + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + printk(" Warning: PCI I/O bit incorrectly " + "set. Ignoring it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - if (pci_request_regions(pdev, "Cyclades-Z") != 0) { - printk(KERN_ERR "cyclades: failed to reserve PCI resources\n"); - continue; - } - - if (mailbox == ZE_V1) { - cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ze_win); - if (ZeIndex == NR_CARDS) { - printk("Cyclades-Ze/PCI found at 0x%lx ", - (ulong)cy_pci_phys2); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); - } else { - Ze_phys0[ZeIndex] = cy_pci_phys0; - Ze_phys2[ZeIndex] = cy_pci_phys2; - Ze_addr0[ZeIndex] = cy_pci_addr0; - Ze_addr2[ZeIndex] = cy_pci_addr2; - Ze_irq[ZeIndex] = cy_pci_irq; - Ze_pdev[ZeIndex] = pdev; - ZeIndex++; - } - i--; - continue; - } else { - cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Zwin); - } + /* Although we don't use this I/O region, we should + request it from the kernel anyway, to avoid problems + with other drivers accessing it. */ + if (pci_request_regions(pdev, "Cyclades-Z") != 0) { + printk(KERN_ERR "cyclades: failed to reserve " + "PCI resources\n"); + continue; + } + + if (mailbox == ZE_V1) { + cy_pci_addr2 = ioremap(cy_pci_phys2, + CyPCI_Ze_win); + if (ZeIndex == NR_CARDS) { + printk("Cyclades-Ze/PCI found at " + "0x%lx but no more cards can " + "be used.\nChange NR_CARDS in " + "cyclades.c and recompile " + "kernel.\n", + (ulong)cy_pci_phys2); + } else { + Ze_phys0[ZeIndex] = cy_pci_phys0; + Ze_phys2[ZeIndex] = cy_pci_phys2; + Ze_addr0[ZeIndex] = cy_pci_addr0; + Ze_addr2[ZeIndex] = cy_pci_addr2; + Ze_irq[ZeIndex] = cy_pci_irq; + Ze_pdev[ZeIndex] = pdev; + ZeIndex++; + } + i--; + continue; + } else { + cy_pci_addr2 = ioremap(cy_pci_phys2,CyPCI_Zwin); + } #ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_addr2, (ulong)cy_pci_addr0); - if (mailbox == ZO_V1) { - cy_writel(&((struct RUNTIME_9060 *) - (cy_pci_addr0))->loc_addr_base, WIN_CREG); - PAUSE - printk("Cyclades-8Zo/PCI: FPGA id %lx, ver %lx\n", - (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *) - (cy_pci_addr2))->fpga_id)), - (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *) - (cy_pci_addr2))->fpga_version))); - cy_writel(&((struct RUNTIME_9060 *) - (cy_pci_addr0))->loc_addr_base, WIN_RAM); - } else { - printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n"); - } + printk("Cyclades-Z/PCI: relocate winaddr=0x%lx " + "ctladdr=0x%lx\n", + (ulong) cy_pci_addr2, (ulong) cy_pci_addr0); + if (mailbox == ZO_V1) { + cy_writel(&((struct RUNTIME_9060 *) + (cy_pci_addr0))->loc_addr_base, + WIN_CREG); + PAUSE + printk("Cyclades-8Zo/PCI: FPGA id %lx, ver " + "%lx\n", (ulong) (0xff & + cy_readl(&((struct CUSTOM_REG *) + (cy_pci_addr2))->fpga_id)), + (ulong)(0xff & + cy_readl(&((struct CUSTOM_REG *) + (cy_pci_addr2))-> + fpga_version))); + cy_writel(&((struct RUNTIME_9060 *) + (cy_pci_addr0))->loc_addr_base, + WIN_RAM); + } else { + printk("Cyclades-Z/PCI: New Cyclades-Z board. " + "FPGA not loaded\n"); + } #endif - /* The following clears the firmware id word. This ensures - that the driver will not attempt to talk to the board - until it has been properly initialized. - */ - PAUSE - if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) - cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L); - - /* This must be a Cyclades-8Zo/PCI. The extendable - version will have a different device_id and will - be allocated its maximum number of ports. */ - cy_pci_nchan = 8; - - if((cy_next_channel+cy_pci_nchan) > NR_PORTS) { - printk("Cyclades-8Zo/PCI found at 0x%lx ", - (ulong)cy_pci_phys2); - printk("but no channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and recompile kernel.\n"); - return(i); - } - - /* fill the next cy_card structure available */ - for (j = 0 ; j < NR_CARDS ; j++) { - if (cy_card[j].base_addr == 0) break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclades-8Zo/PCI found at 0x%lx ", - (ulong)cy_pci_phys2); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); - return(i); - } + /* The following clears the firmware id word. This + ensures that the driver will not attempt to talk to + the board until it has been properly initialized. + */ + PAUSE + if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) + cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L); + + /* This must be a Cyclades-8Zo/PCI. The extendable + version will have a different device_id and will + be allocated its maximum number of ports. */ + cy_pci_nchan = 8; + + if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { + printk("Cyclades-8Zo/PCI found at 0x%lx but" + "no channels are available.\nChange " + "NR_PORTS in cyclades.c and recompile " + "kernel.\n", (ulong)cy_pci_phys2); + return (i); + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + if (cy_card[j].base_addr == 0) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk("Cyclades-8Zo/PCI found at 0x%lx but" + "no more cards can be used.\nChange " + "NR_CARDS in cyclades.c and recompile " + "kernel.\n", (ulong)cy_pci_phys2); + return (i); + } +#ifdef CONFIG_CYZ_INTR + /* allocate IRQ only if board has an IRQ */ + if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { + if (request_irq(cy_pci_irq, cyz_interrupt, + IRQF_SHARED, "Cyclades-Z", + &cy_card[j])) { + printk("Cyclom-8Zo/PCI found at 0x%lx " + "but could not allocate " + "IRQ%d.\n", (ulong)cy_pci_phys2, + cy_pci_irq); + return (i); + } + } +#endif /* CONFIG_CYZ_INTR */ + + /* set cy_card */ + cy_card[j].base_phys = cy_pci_phys2; + cy_card[j].ctl_phys = cy_pci_phys0; + cy_card[j].base_addr = cy_pci_addr2; + cy_card[j].ctl_addr = cy_pci_addr0; + cy_card[j].irq = (int)cy_pci_irq; + cy_card[j].bus_index = 1; + cy_card[j].first_line = cy_next_channel; + cy_card[j].num_chips = -1; + cy_card[j].pdev = pdev; + + /* print message */ #ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) { - if(request_irq(cy_pci_irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", &cy_card[j])) - { - printk("Cyclom-8Zo/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but could not allocate IRQ%d.\n", - cy_pci_irq); - return(i); - } + /* don't report IRQ if board is no IRQ */ + if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) + printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, " + "IRQ%d, ", j + 1, (ulong)cy_pci_phys2, + (ulong) (cy_pci_phys2 + CyPCI_Zwin - 1), + (int)cy_pci_irq); + else +#endif /* CONFIG_CYZ_INTR */ + printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ", + j + 1, (ulong)cy_pci_phys2, + (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1)); + + printk("%d channels starting from port %d.\n", + cy_pci_nchan, cy_next_channel); + cy_next_channel += cy_pci_nchan; } -#endif /* CONFIG_CYZ_INTR */ - - - /* set cy_card */ - cy_card[j].base_phys = cy_pci_phys2; - cy_card[j].ctl_phys = cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int) cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; - cy_card[j].pdev = pdev; + } - /* print message */ -#ifdef CONFIG_CYZ_INTR - /* don't report IRQ if board is no IRQ */ - if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) - printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", - j+1,(ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1), - (int)cy_pci_irq); - else -#endif /* CONFIG_CYZ_INTR */ - printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ", - j+1,(ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1)); - - printk("%d channels starting from port %d.\n", - cy_pci_nchan,cy_next_channel); - cy_next_channel += cy_pci_nchan; - } - } - - for (; ZeIndex != 0 && i < NR_CARDS; i++) { - cy_pci_phys0 = Ze_phys0[0]; - cy_pci_phys2 = Ze_phys2[0]; - cy_pci_addr0 = Ze_addr0[0]; - cy_pci_addr2 = Ze_addr2[0]; - cy_pci_irq = Ze_irq[0]; - pdev = Ze_pdev[0]; - for (j = 0 ; j < ZeIndex-1 ; j++) { - Ze_phys0[j] = Ze_phys0[j+1]; - Ze_phys2[j] = Ze_phys2[j+1]; - Ze_addr0[j] = Ze_addr0[j+1]; - Ze_addr2[j] = Ze_addr2[j+1]; - Ze_irq[j] = Ze_irq[j+1]; - Ze_pdev[j] = Ze_pdev[j+1]; - } - ZeIndex--; - mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_pci_addr0)->mail_box_0); + for (; ZeIndex != 0 && i < NR_CARDS; i++) { + cy_pci_phys0 = Ze_phys0[0]; + cy_pci_phys2 = Ze_phys2[0]; + cy_pci_addr0 = Ze_addr0[0]; + cy_pci_addr2 = Ze_addr2[0]; + cy_pci_irq = Ze_irq[0]; + pdev = Ze_pdev[0]; + for (j = 0; j < ZeIndex - 1; j++) { + Ze_phys0[j] = Ze_phys0[j + 1]; + Ze_phys2[j] = Ze_phys2[j + 1]; + Ze_addr0[j] = Ze_addr0[j + 1]; + Ze_addr2[j] = Ze_addr2[j + 1]; + Ze_irq[j] = Ze_irq[j + 1]; + Ze_pdev[j] = Ze_pdev[j + 1]; + } + ZeIndex--; + mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) + cy_pci_addr0)->mail_box_0); #ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_addr2, (ulong)cy_pci_addr0); - printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n"); + printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", + (ulong)cy_pci_addr2, (ulong)cy_pci_addr0); + printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not " + "loaded\n"); #endif PAUSE - /* This must be the new Cyclades-Ze/PCI. */ - cy_pci_nchan = ZE_V1_NPORTS; - - if((cy_next_channel+cy_pci_nchan) > NR_PORTS) { - printk("Cyclades-Ze/PCI found at 0x%lx ", - (ulong)cy_pci_phys2); - printk("but no channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and recompile kernel.\n"); - return(i); - } - - /* fill the next cy_card structure available */ - for (j = 0 ; j < NR_CARDS ; j++) { - if (cy_card[j].base_addr == 0) break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclades-Ze/PCI found at 0x%lx ", - (ulong)cy_pci_phys2); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); - return(i); - } + /* This must be the new Cyclades-Ze/PCI. */ + cy_pci_nchan = ZE_V1_NPORTS; + + if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { + printk("Cyclades-Ze/PCI found at 0x%lx but no channels " + "are available.\nChange NR_PORTS in cyclades.c " + "and recompile kernel.\n", + (ulong) cy_pci_phys2); + return (i); + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + if (cy_card[j].base_addr == 0) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk("Cyclades-Ze/PCI found at 0x%lx but no more " + "cards can be used.\nChange NR_CARDS in " + "cyclades.c and recompile kernel.\n", + (ulong) cy_pci_phys2); + return (i); + } #ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) { - if(request_irq(cy_pci_irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", &cy_card[j])) - { - printk("Cyclom-Ze/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but could not allocate IRQ%d.\n", - cy_pci_irq); - return(i); - } + /* allocate IRQ only if board has an IRQ */ + if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { + if (request_irq(cy_pci_irq, cyz_interrupt, + IRQF_SHARED, "Cyclades-Z", + &cy_card[j])) { + printk("Cyclom-Ze/PCI found at 0x%lx ", + (ulong) cy_pci_phys2); + printk("but could not allocate IRQ%d.\n", + cy_pci_irq); + return (i); + } } -#endif /* CONFIG_CYZ_INTR */ - - /* set cy_card */ - cy_card[j].base_phys = cy_pci_phys2; - cy_card[j].ctl_phys = cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int) cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; +#endif /* CONFIG_CYZ_INTR */ + + /* set cy_card */ + cy_card[j].base_phys = cy_pci_phys2; + cy_card[j].ctl_phys = cy_pci_phys0; + cy_card[j].base_addr = cy_pci_addr2; + cy_card[j].ctl_addr = cy_pci_addr0; + cy_card[j].irq = (int)cy_pci_irq; + cy_card[j].bus_index = 1; + cy_card[j].first_line = cy_next_channel; + cy_card[j].num_chips = -1; cy_card[j].pdev = pdev; - /* print message */ + /* print message */ #ifdef CONFIG_CYZ_INTR /* don't report IRQ if board is no IRQ */ - if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) - printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", - j+1,(ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1), - (int)cy_pci_irq); + if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) + printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", + j + 1, (ulong) cy_pci_phys2, + (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1), + (int)cy_pci_irq); else -#endif /* CONFIG_CYZ_INTR */ - printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ", - j+1,(ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1)); - - printk("%d channels starting from port %d.\n", - cy_pci_nchan,cy_next_channel); - cy_next_channel += cy_pci_nchan; - } +#endif /* CONFIG_CYZ_INTR */ + printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ", + j + 1, (ulong) cy_pci_phys2, + (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1)); + + printk("%d channels starting from port %d.\n", + cy_pci_nchan, cy_next_channel); + cy_next_channel += cy_pci_nchan; + } if (ZeIndex != 0) { - printk("Cyclades-Ze/PCI found at 0x%x ", - (unsigned int) Ze_phys2[0]); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and recompile kernel.\n"); + printk("Cyclades-Ze/PCI found at 0x%x but no more cards can be " + "used.\nChange NR_CARDS in cyclades.c and recompile " + "kernel.\n", (unsigned int)Ze_phys2[0]); } - return(i); + return (i); #else - return(0); -#endif /* ifdef CONFIG_PCI */ -} /* cy_detect_pci */ - + return (0); +#endif /* ifdef CONFIG_PCI */ +} /* cy_detect_pci */ /* * This routine prints out the appropriate serial driver version number * and identifies which options were configured into this driver. */ -static inline void -show_version(void) +static inline void show_version(void) { - char *rcsvers, *rcsdate, *tmp; - rcsvers = strchr(rcsid, ' '); rcsvers++; - tmp = strchr(rcsvers, ' '); *tmp++ = '\0'; - rcsdate = strchr(tmp, ' '); rcsdate++; - tmp = strrchr(rcsdate, ' '); *tmp = '\0'; - printk("Cyclades driver %s %s\n", - rcsvers, rcsdate); - printk(" built %s %s\n", - __DATE__, __TIME__); -} /* show_version */ - -static int + char *rcsvers, *rcsdate, *tmp; + rcsvers = strchr(rcsid, ' '); + rcsvers++; + tmp = strchr(rcsvers, ' '); + *tmp++ = '\0'; + rcsdate = strchr(tmp, ' '); + rcsdate++; + tmp = strrchr(rcsdate, ' '); + *tmp = '\0'; + printk("Cyclades driver %s %s\n", rcsvers, rcsdate); + printk(" built %s %s\n", __DATE__, __TIME__); +} /* show_version */ + +static int cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, - int *eof, void *data) + int *eof, void *data) { - struct cyclades_port *info; - int i; - int len=0; - off_t begin=0; - off_t pos=0; - int size; - __u32 cur_jifs = jiffies; - - size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn IdleIn Overruns Ldisc\n"); - - pos += size; - len += size; - - /* Output one line for each known port */ - for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) { - info = &cy_port[i]; - - if (info->count) - size = sprintf(buf+len, - "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6ld\n", - info->line, - JIFFIES_DIFF(info->idle_stats.in_use, cur_jifs) / HZ, - info->idle_stats.xmit_bytes, - JIFFIES_DIFF(info->idle_stats.xmit_idle, cur_jifs) / HZ, - info->idle_stats.recv_bytes, - JIFFIES_DIFF(info->idle_stats.recv_idle, cur_jifs) / HZ, - info->idle_stats.overruns, - (long) info->tty->ldisc.num); - else - size = sprintf(buf+len, - "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6ld\n", - info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); + struct cyclades_port *info; + int i; + int len = 0; + off_t begin = 0; + off_t pos = 0; + int size; + __u32 cur_jifs = jiffies; + + size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn " + "IdleIn Overruns Ldisc\n"); + + pos += size; len += size; - pos = begin + len; - if (pos < offset) { - len = 0; - begin = pos; + /* Output one line for each known port */ + for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) { + info = &cy_port[i]; + + if (info->count) + size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu " + "%8lu %9lu %6ld\n", info->line, + JIFFIES_DIFF(info->idle_stats.in_use, + cur_jifs) / HZ, + info->idle_stats.xmit_bytes, + JIFFIES_DIFF(info->idle_stats.xmit_idle, + cur_jifs) / HZ, + info->idle_stats.recv_bytes, + JIFFIES_DIFF(info->idle_stats.recv_idle, + cur_jifs) / HZ, + info->idle_stats.overruns, + (long)info->tty->ldisc.num); + else + size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu " + "%8lu %9lu %6ld\n", + info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); + len += size; + pos = begin + len; + + if (pos < offset) { + len = 0; + begin = pos; + } + if (pos > offset + length) + goto done; } - if (pos > offset + length) - goto done; - } - *eof = 1; + *eof = 1; done: - *start = buf + (offset - begin); /* Start of wanted data */ - len -= (offset - begin); /* Start slop */ - if (len > length) - len = length; /* Ending slop */ - if (len < 0) - len = 0; - return len; + *start = buf + (offset - begin); /* Start of wanted data */ + len -= (offset - begin); /* Start slop */ + if (len > length) + len = length; /* Ending slop */ + if (len < 0) + len = 0; + return len; } /* The serial driver boot-time initialization code! @@ -5190,290 +5326,288 @@ done: */ static const struct tty_operations cy_ops = { - .open = cy_open, - .close = cy_close, - .write = cy_write, - .put_char = cy_put_char, - .flush_chars = cy_flush_chars, - .write_room = cy_write_room, - .chars_in_buffer = cy_chars_in_buffer, - .flush_buffer = cy_flush_buffer, - .ioctl = cy_ioctl, - .throttle = cy_throttle, - .unthrottle = cy_unthrottle, - .set_termios = cy_set_termios, - .stop = cy_stop, - .start = cy_start, - .hangup = cy_hangup, - .break_ctl = cy_break, - .wait_until_sent = cy_wait_until_sent, - .read_proc = cyclades_get_proc_info, - .tiocmget = cy_tiocmget, - .tiocmset = cy_tiocmset, + .open = cy_open, + .close = cy_close, + .write = cy_write, + .put_char = cy_put_char, + .flush_chars = cy_flush_chars, + .write_room = cy_write_room, + .chars_in_buffer = cy_chars_in_buffer, + .flush_buffer = cy_flush_buffer, + .ioctl = cy_ioctl, + .throttle = cy_throttle, + .unthrottle = cy_unthrottle, + .set_termios = cy_set_termios, + .stop = cy_stop, + .start = cy_start, + .hangup = cy_hangup, + .break_ctl = cy_break, + .wait_until_sent = cy_wait_until_sent, + .read_proc = cyclades_get_proc_info, + .tiocmget = cy_tiocmget, + .tiocmset = cy_tiocmset, }; -static int __init -cy_init(void) +static int __init cy_init(void) { - struct cyclades_port *info; - struct cyclades_card *cinfo; - int number_z_boards = 0; - int board,port,i,index; - unsigned long mailbox; - unsigned short chip_number; - int nports; - - cy_serial_driver = alloc_tty_driver(NR_PORTS); - if (!cy_serial_driver) - return -ENOMEM; - show_version(); - - /* Initialize the tty_driver structure */ - - cy_serial_driver->owner = THIS_MODULE; - cy_serial_driver->driver_name = "cyclades"; - cy_serial_driver->name = "ttyC"; - cy_serial_driver->major = CYCLADES_MAJOR; - cy_serial_driver->minor_start = 0; - cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; - cy_serial_driver->init_termios = tty_std_termios; - cy_serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(cy_serial_driver, &cy_ops); - - if (tty_register_driver(cy_serial_driver)) - panic("Couldn't register Cyclades serial driver\n"); - - for (i = 0; i < NR_CARDS; i++) { - /* base_addr=0 indicates board not found */ - cy_card[i].base_addr = NULL; - } - - /* the code below is responsible to find the boards. Each different - type of board has its own detection routine. If a board is found, - the next cy_card structure available is set by the detection - routine. These functions are responsible for checking the - availability of cy_card and cy_port data structures and updating - the cy_next_channel. */ - - /* look for isa boards */ - cy_isa_nboard = cy_detect_isa(); - - /* look for pci boards */ - cy_pci_nboard = cy_detect_pci(); - - cy_nboard = cy_isa_nboard + cy_pci_nboard; - - /* invalidate remaining cy_card structures */ - for (i = 0 ; i < NR_CARDS ; i++) { - if (cy_card[i].base_addr == 0) { - cy_card[i].first_line = -1; - cy_card[i].ctl_addr = NULL; - cy_card[i].irq = 0; - cy_card[i].bus_index = 0; - cy_card[i].first_line = 0; - cy_card[i].num_chips = 0; - } - } - /* invalidate remaining cy_port structures */ - for (i = cy_next_channel ; i < NR_PORTS ; i++) { - cy_port[i].line = -1; - cy_port[i].magic = -1; - } - - /* initialize per-port data structures for each valid board found */ - for (board = 0 ; board < cy_nboard ; board++) { - cinfo = &cy_card[board]; - if (cinfo->num_chips == -1) { /* Cyclades-Z */ - number_z_boards++; - mailbox = cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_card[board].ctl_addr)->mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - spin_lock_init(&cinfo->card_lock); - for (port = cinfo->first_line ; - port < cinfo->first_line + nports; - port++) - { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_STARTECH; - info->card = board; - info->line = port; - info->chip_rev = 0; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - if (mailbox == ZO_V1) - info->xmit_fifo_size = CYZ_FIFO_SIZE; - else - info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; - info->cor1 = 0; - info->cor2 = 0; - info->cor3 = 0; - info->cor4 = 0; - info->cor5 = 0; - info->tbpr = 0; - info->tco = 0; - info->rbpr = 0; - info->rco = 0; - info->custom_divisor = 0; - info->close_delay = 5*HZ/10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = 0; - /* info->timeout */ - /* Bentson's vars */ - info->jiffies[0] = 0; - info->jiffies[1] = 0; - info->jiffies[2] = 0; - info->rflush_count = 0; + struct cyclades_port *info; + struct cyclades_card *cinfo; + int number_z_boards = 0; + int board, port, i, index; + unsigned long mailbox; + unsigned short chip_number; + int nports; + + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + return -ENOMEM; + show_version(); + + /* Initialize the tty_driver structure */ + + cy_serial_driver->owner = THIS_MODULE; + cy_serial_driver->driver_name = "cyclades"; + cy_serial_driver->name = "ttyC"; + cy_serial_driver->major = CYCLADES_MAJOR; + cy_serial_driver->minor_start = 0; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(cy_serial_driver, &cy_ops); + + if (tty_register_driver(cy_serial_driver)) + panic("Couldn't register Cyclades serial driver\n"); + + for (i = 0; i < NR_CARDS; i++) { + /* base_addr=0 indicates board not found */ + cy_card[i].base_addr = NULL; + } + + /* the code below is responsible to find the boards. Each different + type of board has its own detection routine. If a board is found, + the next cy_card structure available is set by the detection + routine. These functions are responsible for checking the + availability of cy_card and cy_port data structures and updating + the cy_next_channel. */ + + /* look for isa boards */ + cy_isa_nboard = cy_detect_isa(); + + /* look for pci boards */ + cy_pci_nboard = cy_detect_pci(); + + cy_nboard = cy_isa_nboard + cy_pci_nboard; + + /* invalidate remaining cy_card structures */ + for (i = 0; i < NR_CARDS; i++) { + if (cy_card[i].base_addr == 0) { + cy_card[i].first_line = -1; + cy_card[i].ctl_addr = NULL; + cy_card[i].irq = 0; + cy_card[i].bus_index = 0; + cy_card[i].first_line = 0; + cy_card[i].num_chips = 0; + } + } + /* invalidate remaining cy_port structures */ + for (i = cy_next_channel; i < NR_PORTS; i++) { + cy_port[i].line = -1; + cy_port[i].magic = -1; + } + + /* initialize per-port data structures for each valid board found */ + for (board = 0; board < cy_nboard; board++) { + cinfo = &cy_card[board]; + if (cinfo->num_chips == -1) { /* Cyclades-Z */ + number_z_boards++; + mailbox = cy_readl(&((struct RUNTIME_9060 __iomem *) + cy_card[board].ctl_addr)-> + mail_box_0); + nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; + cinfo->intr_enabled = 0; + cinfo->nports = 0; /* Will be correctly set later, after + Z FW is loaded */ + spin_lock_init(&cinfo->card_lock); + for (port = cinfo->first_line; + port < cinfo->first_line + nports; port++) { + info = &cy_port[port]; + info->magic = CYCLADES_MAGIC; + info->type = PORT_STARTECH; + info->card = board; + info->line = port; + info->chip_rev = 0; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + if (mailbox == ZO_V1) + info->xmit_fifo_size = CYZ_FIFO_SIZE; + else + info->xmit_fifo_size = + 4 * CYZ_FIFO_SIZE; + info->cor1 = 0; + info->cor2 = 0; + info->cor3 = 0; + info->cor4 = 0; + info->cor5 = 0; + info->tbpr = 0; + info->tco = 0; + info->rbpr = 0; + info->rco = 0; + info->custom_divisor = 0; + info->close_delay = 5 * HZ / 10; + info->closing_wait = CLOSING_WAIT_DELAY; + info->icount.cts = info->icount.dsr = + info->icount.rng = info->icount.dcd = 0; + info->icount.rx = info->icount.tx = 0; + info->icount.frame = info->icount.parity = 0; + info->icount.overrun = info->icount.brk = 0; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->shutdown_wait); + init_waitqueue_head(&info->delta_msr_wait); + /* info->session */ + /* info->pgrp */ + info->read_status_mask = 0; + /* info->timeout */ + /* Bentson's vars */ + info->jiffies[0] = 0; + info->jiffies[1] = 0; + info->jiffies[2] = 0; + info->rflush_count = 0; #ifdef CONFIG_CYZ_INTR - init_timer(&cyz_rx_full_timer[port]); - cyz_rx_full_timer[port].function = NULL; + init_timer(&cyz_rx_full_timer[port]); + cyz_rx_full_timer[port].function = NULL; #endif - } - continue; - }else{ /* Cyclom-Y of some kind*/ - index = cinfo->bus_index; - spin_lock_init(&cinfo->card_lock); - cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - for (port = cinfo->first_line ; - port < cinfo->first_line + cinfo->nports ; - port++) - { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_CIRRUS; - info->card = board; - info->line = port; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - info->xmit_fifo_size = CyMAX_CHAR_FIFO; - info->cor1 = CyPARITY_NONE|Cy_1_STOP|Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = 0x08; /* _very_ small rcv threshold */ - info->cor4 = 0; - info->cor5 = 0; - info->custom_divisor = 0; - info->close_delay = 5*HZ/10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - chip_number = (port - cinfo->first_line) / 4; - if ((info->chip_rev = - cy_readb(cinfo->base_addr + - (cy_chip_offset[chip_number]<= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[13]; /* Tx BPR */ - info->tco = baud_co_60[13]; /* Tx CO */ - info->rbpr = baud_bpr_60[13]; /* Rx BPR */ - info->rco = baud_co_60[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 1; - } else { - info->tbpr = baud_bpr_25[13]; /* Tx BPR */ - info->tco = baud_co_25[13]; /* Tx CO */ - info->rbpr = baud_bpr_25[13]; /* Rx BPR */ - info->rco = baud_co_25[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 0; - } - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = - CyTIMEOUT| CySPECHAR| CyBREAK - | CyPARITY| CyFRAME| CyOVERRUN; - /* info->timeout */ - } - } - } + } + continue; + } else { /* Cyclom-Y of some kind */ + index = cinfo->bus_index; + spin_lock_init(&cinfo->card_lock); + cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; + for (port = cinfo->first_line; + port < cinfo->first_line + cinfo->nports; port++) { + info = &cy_port[port]; + info->magic = CYCLADES_MAGIC; + info->type = PORT_CIRRUS; + info->card = board; + info->line = port; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + info->xmit_fifo_size = CyMAX_CHAR_FIFO; + info->cor1 = + CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = 0x08; /* _very_ small rcv threshold */ + info->cor4 = 0; + info->cor5 = 0; + info->custom_divisor = 0; + info->close_delay = 5 * HZ / 10; + info->closing_wait = CLOSING_WAIT_DELAY; + info->icount.cts = info->icount.dsr = + info->icount.rng = info->icount.dcd = 0; + info->icount.rx = info->icount.tx = 0; + info->icount.frame = info->icount.parity = 0; + info->icount.overrun = info->icount.brk = 0; + chip_number = (port - cinfo->first_line) / 4; + if ((info->chip_rev = + cy_readb(cinfo->base_addr + + (cy_chip_offset[chip_number] << + index) + (CyGFRCR << index))) >= + CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[13]; /* Tx BPR */ + info->tco = baud_co_60[13]; /* Tx CO */ + info->rbpr = baud_bpr_60[13]; /* Rx BPR */ + info->rco = baud_co_60[13]; /* Rx CO */ + info->rflow = 0; + info->rtsdtr_inv = 1; + } else { + info->tbpr = baud_bpr_25[13]; /* Tx BPR */ + info->tco = baud_co_25[13]; /* Tx CO */ + info->rbpr = baud_bpr_25[13]; /* Rx BPR */ + info->rco = baud_co_25[13]; /* Rx CO */ + info->rflow = 0; + info->rtsdtr_inv = 0; + } + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->shutdown_wait); + init_waitqueue_head(&info->delta_msr_wait); + /* info->session */ + /* info->pgrp */ + info->read_status_mask = + CyTIMEOUT | CySPECHAR | CyBREAK + | CyPARITY | CyFRAME | CyOVERRUN; + /* info->timeout */ + } + } + } #ifndef CONFIG_CYZ_INTR - if (number_z_boards && !cyz_timeron){ - cyz_timeron++; - cyz_timerlist.expires = jiffies + 1; - add_timer(&cyz_timerlist); + if (number_z_boards && !cyz_timeron) { + cyz_timeron++; + cyz_timerlist.expires = jiffies + 1; + add_timer(&cyz_timerlist); #ifdef CY_PCI_DEBUG - printk("Cyclades-Z polling initialized\n"); + printk("Cyclades-Z polling initialized\n"); #endif - } -#endif /* CONFIG_CYZ_INTR */ + } +#endif /* CONFIG_CYZ_INTR */ + + return 0; - return 0; - -} /* cy_init */ +} /* cy_init */ -static void __exit -cy_cleanup_module(void) +static void __exit cy_cleanup_module(void) { - int i, e1; + int i, e1; #ifndef CONFIG_CYZ_INTR - if (cyz_timeron){ - cyz_timeron = 0; - del_timer(&cyz_timerlist); - } + if (cyz_timeron){ + cyz_timeron = 0; + del_timer(&cyz_timerlist); + } #endif /* CONFIG_CYZ_INTR */ - if ((e1 = tty_unregister_driver(cy_serial_driver))) - printk("cyc: failed to unregister Cyclades serial driver(%d)\n", - e1); + if ((e1 = tty_unregister_driver(cy_serial_driver))) + printk("cyc: failed to unregister Cyclades serial driver(%d)\n", + e1); - put_tty_driver(cy_serial_driver); + put_tty_driver(cy_serial_driver); - for (i = 0; i < NR_CARDS; i++) { - if (cy_card[i].base_addr) { - iounmap(cy_card[i].base_addr); - if (cy_card[i].ctl_addr) - iounmap(cy_card[i].ctl_addr); - if (cy_card[i].irq + for (i = 0; i < NR_CARDS; i++) { + if (cy_card[i].base_addr) { + iounmap(cy_card[i].base_addr); + if (cy_card[i].ctl_addr) + iounmap(cy_card[i].ctl_addr); + if (cy_card[i].irq #ifndef CONFIG_CYZ_INTR - && cy_card[i].num_chips != -1 /* not a Z card */ + && cy_card[i].num_chips != -1 /* not a Z card */ #endif /* CONFIG_CYZ_INTR */ - ) - free_irq(cy_card[i].irq, &cy_card[i]); + ) + free_irq(cy_card[i].irq, &cy_card[i]); #ifdef CONFIG_PCI - if (cy_card[i].pdev) - pci_release_regions(cy_card[i].pdev); + if (cy_card[i].pdev) + pci_release_regions(cy_card[i].pdev); #endif - } - } + } + } } /* cy_cleanup_module */ module_init(cy_init); -- 2.20.1