From 02ca08b8aecb5c50d67f680d81c725369e0d94a8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 20 Jul 2016 15:20:02 -0300 Subject: [PATCH] [media] v4l2-device.rst: do cross references with kernel-doc This document describes the main kAPI interfaces for the v4l2-device.h header. Add cross references to the documentation produced via kernel-doc. While here, also use monotonic font for constants. Signed-off-by: Mauro Carvalho Chehab --- Documentation/media/kapi/v4l2-device.rst | 130 ++++++++++++----------- 1 file changed, 66 insertions(+), 64 deletions(-) diff --git a/Documentation/media/kapi/v4l2-device.rst b/Documentation/media/kapi/v4l2-device.rst index 6d521b313beb..8e275d0ff0f5 100644 --- a/Documentation/media/kapi/v4l2-device.rst +++ b/Documentation/media/kapi/v4l2-device.rst @@ -1,67 +1,69 @@ V4L2 Device register logic -------------------------- -Each device instance is represented by a struct v4l2_device (v4l2-device.h). +Each device instance is represented by a struct :c:type:`v4l2_device`. Very simple devices can just allocate this struct, but most of the time you would embed this struct inside a larger struct. -You must register the device instance: +You must register the device instance by calling: -.. code-block:: none + :cpp:func:`v4l2_device_register ` + (dev, :c:type:`v4l2_dev `). - v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); - -Registration will initialize the v4l2_device struct. If the dev->driver_data -field is NULL, it will be linked to v4l2_dev. +Registration will initialize the :c:type:`v4l2_device` struct. If the +dev->driver_data field is ``NULL``, it will be linked to +:c:type:`v4l2_dev ` argument. Drivers that want integration with the media device framework need to set dev->driver_data manually to point to the driver-specific device structure -that embed the struct v4l2_device instance. This is achieved by a -dev_set_drvdata() call before registering the V4L2 device instance. They must -also set the struct v4l2_device mdev field to point to a properly initialized -and registered media_device instance. - -If v4l2_dev->name is empty then it will be set to a value derived from dev -(driver name followed by the bus_id, to be precise). If you set it up before -calling v4l2_device_register then it will be untouched. If dev is NULL, then -you **must** setup v4l2_dev->name before calling v4l2_device_register. - -You can use v4l2_device_set_name() to set the name based on a driver name and -a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1, -etc. If the name ends with a digit, then it will insert a dash: cx18-0, -cx18-1, etc. This function returns the instance number. - -The first 'dev' argument is normally the struct device pointer of a pci_dev, -usb_interface or platform_device. It is rare for dev to be NULL, but it happens -with ISA devices or when one device creates multiple PCI devices, thus making -it impossible to associate v4l2_dev with a particular parent. - -You can also supply a notify() callback that can be called by sub-devices to -notify you of events. Whether you need to set this depends on the sub-device. -Any notifications a sub-device supports must be defined in a header in -include/media/.h. - -You unregister with: - -.. code-block:: none - - v4l2_device_unregister(struct v4l2_device *v4l2_dev); - -If the dev->driver_data field points to v4l2_dev, it will be reset to NULL. -Unregistering will also automatically unregister all subdevs from the device. +that embed the struct :c:type:`v4l2_device` instance. This is achieved by a +``dev_set_drvdata()`` call before registering the V4L2 device instance. +They must also set the struct :c:type:`v4l2_device` mdev field to point to a +properly initialized and registered :c:type:`media_device` instance. + +If :c:type:`v4l2_dev `\ ->name is empty then it will be set to a +value derived from dev (driver name followed by the bus_id, to be precise). +If you set it up before calling :cpp:func:`v4l2_device_register` then it will +be untouched. If dev is ``NULL``, then you **must** setup +:c:type:`v4l2_dev `\ ->name before calling +:cpp:func:`v4l2_device_register`. + +You can use :cpp:func:`v4l2_device_set_name` to set the name based on a driver +name and a driver-global atomic_t instance. This will generate names like +``ivtv0``, ``ivtv1``, etc. If the name ends with a digit, then it will insert +a dash: ``cx18-0``, ``cx18-1``, etc. This function returns the instance number. + +The first ``dev`` argument is normally the ``struct device`` pointer of a +``pci_dev``, ``usb_interface`` or ``platform_device``. It is rare for dev to +be ``NULL``, but it happens with ISA devices or when one device creates +multiple PCI devices, thus making it impossible to associate +:c:type:`v4l2_dev ` with a particular parent. + +You can also supply a ``notify()`` callback that can be called by sub-devices +to notify you of events. Whether you need to set this depends on the +sub-device. Any notifications a sub-device supports must be defined in a header +in ``include/media/subdevice.h``. + +V4L2 devices are unregistered by calling: + + :cpp:func:`v4l2_device_unregister` + (:c:type:`v4l2_dev `). + +If the dev->driver_data field points to :c:type:`v4l2_dev `, +it will be reset to ``NULL``. Unregistering will also automatically unregister +all subdevs from the device. If you have a hotpluggable device (e.g. a USB device), then when a disconnect -happens the parent device becomes invalid. Since v4l2_device has a pointer to -that parent device it has to be cleared as well to mark that the parent is -gone. To do this call: +happens the parent device becomes invalid. Since :c:type:`v4l2_device` has a +pointer to that parent device it has to be cleared as well to mark that the +parent is gone. To do this call: -.. code-block:: none - - v4l2_device_disconnect(struct v4l2_device *v4l2_dev); + :cpp:func:`v4l2_device_disconnect` + (:c:type:`v4l2_dev `). This does *not* unregister the subdevs, so you still need to call the -v4l2_device_unregister() function for that. If your driver is not hotpluggable, -then there is no need to call v4l2_device_disconnect(). +:cpp:func:`v4l2_device_unregister` function for that. If your driver is not +hotpluggable, then there is no need to call :cpp:func:`v4l2_device_disconnect`. Sometimes you need to iterate over all devices registered by a specific driver. This is usually the case if multiple device drivers use the same @@ -70,7 +72,7 @@ hardware. The same is true for alsa drivers for example. You can iterate over all registered devices as follows: -.. code-block:: none +.. code-block:: c static int callback(struct device *dev, void *p) { @@ -102,7 +104,7 @@ commonly used to map a device instance to an index of a module option array. The recommended approach is as follows: -.. code-block:: none +.. code-block:: c static atomic_t drv_instance = ATOMIC_INIT(0); @@ -113,28 +115,28 @@ The recommended approach is as follows: } If you have multiple device nodes then it can be difficult to know when it is -safe to unregister v4l2_device for hotpluggable devices. For this purpose -v4l2_device has refcounting support. The refcount is increased whenever -video_register_device is called and it is decreased whenever that device node -is released. When the refcount reaches zero, then the v4l2_device release() -callback is called. You can do your final cleanup there. +safe to unregister :c:type:`v4l2_device` for hotpluggable devices. For this +purpose :c:type:`v4l2_device` has refcounting support. The refcount is +increased whenever :cpp:func:`video_register_device` is called and it is +decreased whenever that device node is released. When the refcount reaches +zero, then the :c:type:`v4l2_device` release() callback is called. You can +do your final cleanup there. If other device nodes (e.g. ALSA) are created, then you can increase and decrease the refcount manually as well by calling: -.. code-block:: none - - void v4l2_device_get(struct v4l2_device *v4l2_dev); + :cpp:func:`v4l2_device_get` + (:c:type:`v4l2_dev `). or: -.. code-block:: none - - int v4l2_device_put(struct v4l2_device *v4l2_dev); + :cpp:func:`v4l2_device_put` + (:c:type:`v4l2_dev `). -Since the initial refcount is 1 you also need to call v4l2_device_put in the -disconnect() callback (for USB devices) or in the remove() callback (for e.g. -PCI devices), otherwise the refcount will never reach 0. +Since the initial refcount is 1 you also need to call +:cpp:func:`v4l2_device_put` in the ``disconnect()`` callback (for USB devices) +or in the ``remove()`` callback (for e.g. PCI devices), otherwise the refcount +will never reach 0. V4L2 device kAPI ^^^^^^^^^^^^^^^^ -- 2.20.1