From 01ce661fc83005947dc958a5739c153843af8a73 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 7 Nov 2011 19:54:13 -0800 Subject: [PATCH] Input: ALPS - add semi-MT support for v3 protocol Signed-off-by: Seth Forshee Acked-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 233 ++++++++++++++++++++++++++++++++++--- drivers/input/mouse/alps.h | 1 + 2 files changed, 215 insertions(+), 19 deletions(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index a0248fd62ef8..bd87380bd879 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -26,6 +27,12 @@ /* * Definitions for ALPS version 3 and 4 command mode protocol */ +#define ALPS_V3_X_MAX 2000 +#define ALPS_V3_Y_MAX 1400 + +#define ALPS_BITMAP_X_BITS 15 +#define ALPS_BITMAP_Y_BITS 11 + #define ALPS_CMD_NIBBLE_10 0x01f2 static const struct alps_nibble_commands alps_v3_nibble_commands[] = { @@ -250,6 +257,137 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) input_sync(dev); } +/* + * Process bitmap data from v3 and v4 protocols. Returns the number of + * fingers detected. A return value of 0 means at least one of the + * bitmaps was empty. + * + * The bitmaps don't have enough data to track fingers, so this function + * only generates points representing a bounding box of all contacts. + * These points are returned in x1, y1, x2, and y2 when the return value + * is greater than 0. + */ +static int alps_process_bitmap(unsigned int x_map, unsigned int y_map, + int *x1, int *y1, int *x2, int *y2) +{ + struct alps_bitmap_point { + int start_bit; + int num_bits; + }; + + int fingers_x = 0, fingers_y = 0, fingers; + int i, bit, prev_bit; + struct alps_bitmap_point x_low = {0,}, x_high = {0,}; + struct alps_bitmap_point y_low = {0,}, y_high = {0,}; + struct alps_bitmap_point *point; + + if (!x_map || !y_map) + return 0; + + *x1 = *y1 = *x2 = *y2 = 0; + + prev_bit = 0; + point = &x_low; + for (i = 0; x_map != 0; i++, x_map >>= 1) { + bit = x_map & 1; + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_x++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &x_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * y bitmap is reversed for what we need (lower positions are in + * higher bits), so we process from the top end. + */ + y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS); + prev_bit = 0; + point = &y_low; + for (i = 0; y_map != 0; i++, y_map <<= 1) { + bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_y++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &y_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * Fingers can overlap, so we use the maximum count of fingers + * on either axis as the finger count. + */ + fingers = max(fingers_x, fingers_y); + + /* + * If total fingers is > 1 but either axis reports only a single + * contact, we have overlapping or adjacent fingers. For the + * purposes of creating a bounding box, divide the single contact + * (roughly) equally between the two points. + */ + if (fingers > 1) { + if (fingers_x == 1) { + i = x_low.num_bits / 2; + x_low.num_bits = x_low.num_bits - i; + x_high.start_bit = x_low.start_bit + i; + x_high.num_bits = max(i, 1); + } else if (fingers_y == 1) { + i = y_low.num_bits / 2; + y_low.num_bits = y_low.num_bits - i; + y_high.start_bit = y_low.start_bit + i; + y_high.num_bits = max(i, 1); + } + } + + *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) / + (2 * (ALPS_BITMAP_X_BITS - 1)); + *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) / + (2 * (ALPS_BITMAP_Y_BITS - 1)); + + if (fingers > 1) { + *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (ALPS_BITMAP_X_BITS - 1)); + *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (ALPS_BITMAP_Y_BITS - 1)); + } + + return fingers; +} + +static void alps_set_slot(struct input_dev *dev, int slot, bool active, + int x, int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + +static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, + int x1, int y1, int x2, int y2) +{ + alps_set_slot(dev, 0, num_fingers != 0, x1, y1); + alps_set_slot(dev, 1, num_fingers == 2, x2, y2); +} + static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -318,16 +456,17 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) struct input_dev *dev2 = priv->dev2; int x, y, z; int left, right, middle; + int x1 = 0, y1 = 0, x2 = 0, y2 = 0; + int fingers = 0, bmap_fingers; + unsigned int x_bitmap, y_bitmap; /* - * There's no single feature of touchpad position and bitmap - * packets that can be used to distinguish between them. We - * rely on the fact that a bitmap packet should always follow - * a position packet with bit 6 of packet[4] set. + * There's no single feature of touchpad position and bitmap packets + * that can be used to distinguish between them. We rely on the fact + * that a bitmap packet should always follow a position packet with + * bit 6 of packet[4] set. */ if (priv->multi_packet) { - priv->multi_packet = 0; - /* * Sometimes a position packet will indicate a multi-packet * sequence, but then what follows is another position @@ -335,18 +474,49 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) * position packet as usual. */ if (packet[0] & 0x40) { + fingers = (packet[5] & 0x3) + 1; + x_bitmap = ((packet[4] & 0x7e) << 8) | + ((packet[1] & 0x7f) << 2) | + ((packet[0] & 0x30) >> 4); + y_bitmap = ((packet[3] & 0x70) << 4) | + ((packet[2] & 0x7f) << 1) | + (packet[4] & 0x01); + + bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + /* - * Bitmap packets are not yet supported, so for now - * just ignore them. + * We shouldn't report more than one finger if + * we don't have two coordinates. */ - return; + if (fingers > 1 && bmap_fingers < 2) + fingers = bmap_fingers; + + /* Now process position packet */ + packet = priv->multi_data; + } else { + priv->multi_packet = 0; } } - if (!priv->multi_packet && (packet[4] & 0x40)) + /* + * Bit 6 of byte 0 is not usually set in position packets. The only + * times it seems to be set is in situations where the data is + * suspect anyway, e.g. a palm resting flat on the touchpad. Given + * this combined with the fact that this bit is useful for filtering + * out misidentified bitmap packets, we reject anything with this + * bit set. + */ + if (packet[0] & 0x40) + return; + + if (!priv->multi_packet && (packet[4] & 0x40)) { priv->multi_packet = 1; - else - priv->multi_packet = 0; + memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); + return; + } + + priv->multi_packet = 0; left = packet[3] & 0x01; right = packet[3] & 0x02; @@ -366,22 +536,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) if (x && y && !z) return; + /* + * If we don't have MT data or the bitmaps were empty, we have + * to rely on ST data. + */ + if (!fingers) { + x1 = x; + y1 = y; + fingers = z > 0 ? 1 : 0; + } + if (z >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); + + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_MIDDLE, middle); + if (z > 0) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); } input_report_abs(dev, ABS_PRESSURE, z); - input_report_key(dev, BTN_TOOL_FINGER, z > 0); - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); - input_report_key(dev, BTN_MIDDLE, middle); - input_sync(dev); if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { @@ -1368,9 +1554,18 @@ int alps_init(struct psmouse *psmouse) input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); break; case ALPS_PROTO_V3: + set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); + input_mt_init_slots(dev1, 2); + input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); + input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); + + set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); + set_bit(BTN_TOOL_QUADTAP, dev1->keybit); + /* fall through */ case ALPS_PROTO_V4: - input_set_abs_params(dev1, ABS_X, 0, 2000, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, 1400, 0, 0); + input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); break; } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 62db7f489a59..a00a4ab92a0f 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -38,6 +38,7 @@ struct alps_data { int addr_command; /* Command to set register address */ int prev_fin; /* Finger bit from previous packet */ int multi_packet; /* Multi-packet data in progress */ + unsigned char multi_data[6]; /* Saved multi-packet data */ u8 quirks; struct timer_list timer; }; -- 2.20.1