From 011b9910bdaf2e52c48c012490ab444fceea1959 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 15 Feb 2011 15:08:02 -0800 Subject: [PATCH] drm/i915: skip FDI & PCH enabling for DP_A eDP on the CPU doesn't need the PCH set up at all, it can in fact cause problems. So avoid FDI training and PCH PLL enabling in that case. Signed-off-by: Jesse Barnes Tested-by: Andy Whitcroft Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 83 +++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dcb821737f38..9ca1bb2554fc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) atomic_read(&obj->pending_flip) == 0); } +static bool intel_crtc_driving_pch(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + /* + * If there's a non-PCH eDP on this crtc, it must be DP_A, and that + * must be driven by its own crtc; no sharing is possible. + */ + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_EDP: + if (!intel_encoder_is_pch_edp(&encoder->base)) + return false; + continue; + } + } + + return true; +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + bool is_pch_port = false; if (intel_crtc->active) return; @@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } - ironlake_fdi_enable(crtc); + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else { + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); + } /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_flush_display_plane(dev, plane); } + /* Skip the PCH stuff if possible */ + if (!is_pch_port) + goto done; + /* For PCH output, training FDI link */ if (IS_GEN6(dev)) gen6_fdi_link_train(crtc); @@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); - +done: intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); -- 2.20.1