From 001cea77b98f912050b8ea8995253fdbe7333fb6 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 27 Oct 2011 05:09:48 +0000 Subject: [PATCH] bnx2x: Fix 54618se LED behavior Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 44 ++++++++++--------- 1 file changed, 23 insertions(+), 21 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 23333e0a1ef4..bce203fa4b9e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -5994,7 +5994,13 @@ int bnx2x_set_led(struct link_params *params, SHARED_HW_CFG_LED_MAC1); tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); + if (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1); + else { + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp | EMAC_LED_OVERRIDE)); + } break; case LED_MODE_OPER: @@ -6047,8 +6053,15 @@ int bnx2x_set_led(struct link_params *params, else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); + } else if ((params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && + (mode != LED_MODE_OPER)) { + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3); } else - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ @@ -6060,8 +6073,13 @@ int bnx2x_set_led(struct link_params *params, LED_BLINK_RATE_VAL_E1X_E2); REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1); - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp & (~EMAC_LED_OVERRIDE))); + if ((params->phy[EXT_PHY1].type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && + (mode != LED_MODE_OPER)) { + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); + } if (CHIP_IS_E1(bp) && ((speed == SPEED_2500) || @@ -10309,22 +10327,6 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, return 0; } -static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy, - struct link_params *params, u8 mode) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode); - switch (mode) { - case LED_MODE_FRONT_PANEL_OFF: - case LED_MODE_OFF: - case LED_MODE_OPER: - case LED_MODE_ON: - default: - break; - } - return; -} - static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -11101,7 +11103,7 @@ static struct bnx2x_phy phy_54618se = { .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led, + .set_link_led = (set_link_led_t)NULL, .phy_specific_func = (phy_specific_func_t)NULL }; /*****************************************************************/ -- 2.20.1