[GitHub/MotorolaMobilityLLC/kernel-slsi.git] /

#
# Input core configuration
#
menuconfig INPUT_KEYBOARD
        bool "Keyboards" if EXPERT || !X86
        default y
        help
          Say Y here, and a list of supported keyboards will be displayed.
          This option doesn't affect the kernel.

          If unsure, say Y.

if INPUT_KEYBOARD

config KEYBOARD_ADP5520
        tristate "Keypad Support for ADP5520 PMIC"
        depends on PMIC_ADP5520
        help
          This option enables support for the keypad scan matrix
          on Analog Devices ADP5520 PMICs.

          To compile this driver as a module, choose M here: the module will
          be called adp5520-keys.

config KEYBOARD_ADP5588
        tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
        depends on I2C
        help
          Say Y here if you want to use a ADP5588/87 attached to your
          system I2C bus.

          To compile this driver as a module, choose M here: the
          module will be called adp5588-keys.

config KEYBOARD_ADP5589
        tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
        depends on I2C
        help
          Say Y here if you want to use a ADP5585/ADP5589 attached to your
          system I2C bus.

          To compile this driver as a module, choose M here: the
          module will be called adp5589-keys.

config KEYBOARD_AMIGA
        tristate "Amiga keyboard"
        depends on AMIGA
        help
          Say Y here if you are running Linux on any AMIGA and have a keyboard
          attached.

          To compile this driver as a module, choose M here: the
          module will be called amikbd.

config ATARI_KBD_CORE
        bool

config KEYBOARD_ATARI
        tristate "Atari keyboard"
        depends on ATARI
        select ATARI_KBD_CORE
        help
          Say Y here if you are running Linux on any Atari and have a keyboard
          attached.

          To compile this driver as a module, choose M here: the
          module will be called atakbd.

config KEYBOARD_ATKBD
        tristate "AT keyboard" if EXPERT || !X86
        default y
        select SERIO
        select SERIO_LIBPS2
        select SERIO_I8042 if X86
        select SERIO_GSCPS2 if GSC
        help
          Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
          you'll need this, unless you have a different type keyboard (USB, ADB
          or other). This also works for AT and PS/2 keyboards connected over a
          PS/2 to serial converter.

          If unsure, say Y.

          To compile this driver as a module, choose M here: the
          module will be called atkbd.

config KEYBOARD_ATKBD_HP_KEYCODES
        bool "Use HP keyboard scancodes"
        depends on PARISC && KEYBOARD_ATKBD
        default y
        help
          Say Y here if you have a PA-RISC machine and want to use an AT or
          PS/2 keyboard, and your keyboard uses keycodes that are specific to
          PA-RISC keyboards.

          Say N if you use a standard keyboard.

config KEYBOARD_ATKBD_RDI_KEYCODES
        bool "Use PrecisionBook keyboard scancodes"
        depends on KEYBOARD_ATKBD_HP_KEYCODES
        default n
        help
          If you have an RDI PrecisionBook, say Y here if you want to use its
          built-in keyboard (as opposed to an external keyboard).

          The PrecisionBook has five keys that conflict with those used by most
          AT and PS/2 keyboards. These are as follows:

            PrecisionBook    Standard AT or PS/2

            F1               F12
            Left Ctrl        Left Alt
            Caps Lock        Left Ctrl
            Right Ctrl       Caps Lock
            Left             102nd key (the key to the right of Left Shift)

          If you say N here, and use the PrecisionBook keyboard, then each key
          in the left-hand column will be interpreted as the corresponding key
          in the right-hand column.

          If you say Y here, and use an external keyboard, then each key in the
          right-hand column will be interpreted as the key shown in the
          left-hand column.

config KEYBOARD_QT1070
       tristate "Atmel AT42QT1070 Touch Sensor Chip"
       depends on I2C
       help
         Say Y here if you want to use Atmel AT42QT1070 QTouch
         Sensor chip as input device.

         To compile this driver as a module, choose M here:
         the module will be called qt1070

config KEYBOARD_QT2160
        tristate "Atmel AT42QT2160 Touch Sensor Chip"
        depends on I2C && EXPERIMENTAL
        help
          If you say yes here you get support for Atmel AT42QT2160 Touch
          Sensor chip as a keyboard input.

          This driver can also be built as a module. If so, the module
          will be called qt2160.

config KEYBOARD_BFIN
        tristate "Blackfin BF54x keypad support"
        depends on (BF54x && !BF544)
        help
          Say Y here if you want to use the BF54x keypad.

          To compile this driver as a module, choose M here: the
          module will be called bf54x-keys.

config KEYBOARD_LKKBD
        tristate "DECstation/VAXstation LK201/LK401 keyboard"
        select SERIO
        help
          Say Y here if you want to use a LK201 or LK401 style serial
          keyboard. This keyboard is also useable on PCs if you attach
          it with the inputattach program. The connector pinout is
          described within lkkbd.c.

          To compile this driver as a module, choose M here: the
          module will be called lkkbd.

config KEYBOARD_EP93XX
        tristate "EP93xx Matrix Keypad support"
        depends on ARCH_EP93XX
        help
          Say Y here to enable the matrix keypad on the Cirrus EP93XX.

          To compile this driver as a module, choose M here: the
          module will be called ep93xx_keypad.

config KEYBOARD_GPIO
        tristate "GPIO Buttons"
        depends on GENERIC_GPIO
        help
          This driver implements support for buttons connected
          to GPIO pins of various CPUs (and some other chips).

          Say Y here if your device has buttons connected
          directly to such GPIO pins.  Your board-specific
          setup logic must also provide a platform device,
          with configuration data saying which GPIOs are used.

          To compile this driver as a module, choose M here: the
          module will be called gpio_keys.

config KEYBOARD_GPIO_POLLED
        tristate "Polled GPIO buttons"
        depends on GENERIC_GPIO
        select INPUT_POLLDEV
        help
          This driver implements support for buttons connected
          to GPIO pins that are not capable of generating interrupts.

          Say Y here if your device has buttons connected
          directly to such GPIO pins.  Your board-specific
          setup logic must also provide a platform device,
          with configuration data saying which GPIOs are used.

          To compile this driver as a module, choose M here: the
          module will be called gpio_keys_polled.

config KEYBOARD_TCA6416
        tristate "TCA6416/TCA6408A Keypad Support"
        depends on I2C
        help
          This driver implements basic keypad functionality
          for keys connected through TCA6416/TCA6408A IO expanders.

          Say Y here if your device has keys connected to
          TCA6416/TCA6408A IO expander. Your board-specific setup logic
          must also provide pin-mask details(of which TCA6416 pins
          are used for keypad).

          If enabled the entire TCA6416 device will be managed through
          this driver.

          To compile this driver as a module, choose M here: the
          module will be called tca6416_keypad.

config KEYBOARD_TCA8418
        tristate "TCA8418 Keypad Support"
        depends on I2C
        help
          This driver implements basic keypad functionality
          for keys connected through TCA8418 keypad decoder.

          Say Y here if your device has keys connected to
          TCA8418 keypad decoder.

          If enabled the complete TCA8418 device will be managed through
          this driver.

          To compile this driver as a module, choose M here: the
          module will be called tca8418_keypad.

config KEYBOARD_MATRIX
        tristate "GPIO driven matrix keypad support"
        depends on GENERIC_GPIO
        help
          Enable support for GPIO driven matrix keypad.

          To compile this driver as a module, choose M here: the
          module will be called matrix_keypad.

config KEYBOARD_HIL_OLD
        tristate "HP HIL keyboard support (simple driver)"
        depends on GSC || HP300
        default y
        help
          The "Human Interface Loop" is a older, 8-channel USB-like
          controller used in several Hewlett Packard models. This driver
          was adapted from the one written for m68k/hp300, and implements
          support for a keyboard attached to the HIL port, but not for
          any other types of HIL input devices like mice or tablets.
          However, it has been thoroughly tested and is stable.

          If you want full HIL support including support for multiple
          keyboards, mice, and tablets, you have to enable the
          "HP System Device Controller i8042 Support" in the input/serio
          submenu.

config KEYBOARD_HIL
        tristate "HP HIL keyboard/pointer support"
        depends on GSC || HP300
        default y
        select HP_SDC
        select HIL_MLC
        select SERIO
        help
          The "Human Interface Loop" is a older, 8-channel USB-like
          controller used in several Hewlett Packard models.
          This driver implements support for HIL-keyboards and pointing
          devices (mice, tablets, touchscreens) attached
          to your machine, so normally you should say Y here.

config KEYBOARD_HP6XX
        tristate "HP Jornada 6xx keyboard"
        depends on SH_HP6XX
        select INPUT_POLLDEV
        help
          Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in keyboard.

          To compile this driver as a module, choose M here: the
          module will be called jornada680_kbd.

config KEYBOARD_HP7XX
        tristate "HP Jornada 7xx keyboard"
        depends on SA1100_JORNADA720_SSP && SA1100_SSP
        help
          Say Y here if you have a HP Jornada 710/720/728 and want to
          support the built-in keyboard.

          To compile this driver as a module, choose M here: the
          module will be called jornada720_kbd.

config KEYBOARD_LM8323
        tristate "LM8323 keypad chip"
        depends on I2C
        depends on LEDS_CLASS
        help
          If you say yes here you get support for the National Semiconductor
          LM8323 keypad controller.

          To compile this driver as a module, choose M here: the
          module will be called lm8323.

config KEYBOARD_LOCOMO
        tristate "LoCoMo Keyboard Support"
        depends on SHARP_LOCOMO
        help
          Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA

          To compile this driver as a module, choose M here: the
          module will be called locomokbd.

config KEYBOARD_MAPLE
        tristate "Maple bus keyboard"
        depends on SH_DREAMCAST && MAPLE
        help
          Say Y here if you have a Dreamcast console running Linux and have
          a keyboard attached to its Maple bus.

          To compile this driver as a module, choose M here: the
          module will be called maple_keyb.

config KEYBOARD_MAX7359
        tristate "Maxim MAX7359 Key Switch Controller"
        depends on I2C
        help
          If you say yes here you get support for the Maxim MAX7359 Key
          Switch Controller chip. This providers microprocessors with
          management of up to 64 key switches

          To compile this driver as a module, choose M here: the
          module will be called max7359_keypad.

config KEYBOARD_MCS
        tristate "MELFAS MCS Touchkey"
        depends on I2C
        help
          Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
          chip in your system.

          If unsure, say N.

          To compile this driver as a module, choose M here: the
          module will be called mcs_touchkey.

config KEYBOARD_MPR121
        tristate "Freescale MPR121 Touchkey"
        depends on I2C
        help
          Say Y here if you have Freescale MPR121 touchkey controller
          chip in your system.

          If unsure, say N.

          To compile this driver as a module, choose M here: the
          module will be called mpr121_touchkey.

config KEYBOARD_IMX
        tristate "IMX keypad support"
        depends on ARCH_MXC
        help
          Enable support for IMX keypad port.

          To compile this driver as a module, choose M here: the
          module will be called imx_keypad.

config KEYBOARD_NEWTON
        tristate "Newton keyboard"
        select SERIO
        help
          Say Y here if you have a Newton keyboard on a serial port.

          To compile this driver as a module, choose M here: the
          module will be called newtonkbd.

config KEYBOARD_NOMADIK
        tristate "ST-Ericsson Nomadik SKE keyboard"
        depends on PLAT_NOMADIK
        help
          Say Y here if you want to use a keypad provided on the SKE controller
          used on the Ux500 and Nomadik platforms

          To compile this driver as a module, choose M here: the
          module will be called nmk-ske-keypad.

config KEYBOARD_TEGRA
        tristate "NVIDIA Tegra internal matrix keyboard controller support"
        depends on ARCH_TEGRA
        select INPUT_OF_MATRIX_KEYMAP if USE_OF
        help
          Say Y here if you want to use a matrix keyboard connected directly
          to the internal keyboard controller on Tegra SoCs.

          To compile this driver as a module, choose M here: the
          module will be called tegra-kbc.

config KEYBOARD_OPENCORES
        tristate "OpenCores Keyboard Controller"
        help
          Say Y here if you want to use the OpenCores Keyboard Controller
          http://www.opencores.org/project,keyboardcontroller

          To compile this driver as a module, choose M here; the
          module will be called opencores-kbd.

config KEYBOARD_PXA27x
        tristate "PXA27x/PXA3xx keypad support"
        depends on PXA27x || PXA3xx || ARCH_MMP
        help
          Enable support for PXA27x/PXA3xx keypad controller.

          To compile this driver as a module, choose M here: the
          module will be called pxa27x_keypad.

config KEYBOARD_PXA930_ROTARY
        tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
        depends on CPU_PXA930 || CPU_PXA935
        help
          Enable support for PXA930/PXA935 Enhanced Rotary Controller.

          To compile this driver as a module, choose M here: the
          module will be called pxa930_rotary.

config KEYBOARD_PMIC8XXX
        tristate "Qualcomm PMIC8XXX keypad support"
        depends on MFD_PM8XXX
        help
          Say Y here if you want to enable the driver for the PMIC8XXX
          keypad provided as a reference design from Qualcomm. This is intended
          to support upto 18x8 matrix based keypad design.

          To compile this driver as a module, choose M here: the module will
          be called pmic8xxx-keypad.

config KEYBOARD_SAMSUNG
        tristate "Samsung keypad support"
        depends on HAVE_CLK
        help
          Say Y here if you want to use the keypad on your Samsung mobile
          device.

          To compile this driver as a module, choose M here: the
          module will be called samsung-keypad.

config KEYBOARD_STOWAWAY
        tristate "Stowaway keyboard"
        select SERIO
        help
          Say Y here if you have a Stowaway keyboard on a serial port.
          Stowaway compatible keyboards like Dicota Input-PDA keyboard
          are also supported by this driver.

          To compile this driver as a module, choose M here: the
          module will be called stowaway.

config KEYBOARD_SUNKBD
        tristate "Sun Type 4 and Type 5 keyboard"
        select SERIO
        help
          Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
          connected either to the Sun keyboard connector or to an serial
          (RS-232) port via a simple adapter.

          To compile this driver as a module, choose M here: the
          module will be called sunkbd.

config KEYBOARD_SH_KEYSC
        tristate "SuperH KEYSC keypad support"
        depends on SUPERH || ARCH_SHMOBILE
        help
          Say Y here if you want to use a keypad attached to the KEYSC block
          on SuperH processors such as sh7722 and sh7343.

          To compile this driver as a module, choose M here: the
          module will be called sh_keysc.

config KEYBOARD_STMPE
        tristate "STMPE keypad support"
        depends on MFD_STMPE
        help
          Say Y here if you want to use the keypad controller on STMPE I/O
          expanders.

          To compile this driver as a module, choose M here: the module will be
          called stmpe-keypad.

config KEYBOARD_DAVINCI
        tristate "TI DaVinci Key Scan"
        depends on ARCH_DAVINCI_DM365
        help
          Say Y to enable keypad module support for the TI DaVinci
          platforms (DM365).

          To compile this driver as a module, choose M here: the
          module will be called davinci_keyscan.

config KEYBOARD_OMAP
        tristate "TI OMAP keypad support"
        depends on (ARCH_OMAP1 || ARCH_OMAP2)
        help
          Say Y here if you want to use the OMAP keypad.

          To compile this driver as a module, choose M here: the
          module will be called omap-keypad.

config KEYBOARD_OMAP4
        tristate "TI OMAP4 keypad support"
        help
          Say Y here if you want to use the OMAP4 keypad.

          To compile this driver as a module, choose M here: the
          module will be called omap4-keypad.

config KEYBOARD_SPEAR
        tristate "ST SPEAR keyboard support"
        depends on PLAT_SPEAR
        help
          Say Y here if you want to use the SPEAR keyboard.

          To compile this driver as a module, choose M here: the
          module will be called spear-keboard.

config KEYBOARD_TC3589X
        tristate "TC3589X Keypad support"
        depends on MFD_TC3589X
        help
          Say Y here if you want to use the keypad controller on
          TC35892/3 I/O expander.

          To compile this driver as a module, choose M here: the
          module will be called tc3589x-keypad.

config KEYBOARD_TNETV107X
        tristate "TI TNETV107X keypad support"
        depends on ARCH_DAVINCI_TNETV107X
        help
          Say Y here if you want to use the TNETV107X keypad.

          To compile this driver as a module, choose M here: the
          module will be called tnetv107x-keypad.

config KEYBOARD_TWL4030
        tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
        depends on TWL4030_CORE
        help
          Say Y here if your board use the keypad controller on
          TWL4030 family chips.  It's safe to say enable this
          even on boards that don't use the keypad controller.

          To compile this driver as a module, choose M here: the
          module will be called twl4030_keypad.

config KEYBOARD_XTKBD
        tristate "XT keyboard"
        select SERIO
        help
          Say Y here if you want to use the old IBM PC/XT keyboard (or
          compatible) on your system. This is only possible with a
          parallel port keyboard adapter, you cannot connect it to the
          keyboard port on a PC that runs Linux.

          To compile this driver as a module, choose M here: the
          module will be called xtkbd.

config KEYBOARD_W90P910
        tristate "W90P910 Matrix Keypad support"
        depends on ARCH_W90X900
        help
          Say Y here to enable the matrix keypad on evaluation board
          based on W90P910.

          To compile this driver as a module, choose M here: the
          module will be called w90p910_keypad.

endif