powerpc/p3060qds: Add support for P3060QDS board
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Fri, 26 Aug 2011 03:18:21 +0000 (11:18 +0800)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 3 Nov 2011 18:20:47 +0000 (13:20 -0500)
commit96cc017c5b7ec095ef047d3c1952b6b6bbf98943
tree74f124225552f072152c54ed0241038818b422ee
parent6ca6ca5d813845533bcaaaeb2ca59d0805a028ca
powerpc/p3060qds: Add support for P3060QDS board

The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
The P3060 Processor combines six e500mc Power Architecture processor cores with
high-performance datapath acceleration architecture(DPAA), CoreNet fabric
infrastructure, as well as network and peripheral interfaces.

P3060QDS Board Overview:
Memory subsystem:
  - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
  - 128M Bytes NOR flash single-chip memory
  - 16M Bytes SPI flash
  - 8K Bytes AT24C64 I2C EEPROM
Ethernet:
  - 4x1G + 4x1G/2.5G Ethernet controllers
  - 2xRGMII + 1xMII, three VSC8641 PHYs on board
  - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
PCIe: Two PCI Express 2.0 controllers/ports
USB:  Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
I2C:  Four I2C controllers
UART: Supports up to four UARTs
RapidIO: Supports two serial RapidIO ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/p3060qds.dts [new file with mode: 0644]
arch/powerpc/boot/dts/p3060si.dtsi [new file with mode: 0644]
arch/powerpc/configs/corenet32_smp_defconfig
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/Makefile
arch/powerpc/platforms/85xx/p3060_qds.c [new file with mode: 0644]