[PATCH] Wireless Extensions 18 (aka WPA)

        This is version 18 of the Wireless Extensions. The main change
  is that it adds all the necessary APIs for WPA and WPA2 support. This
  work was entirely done by Jouni Malinen, so let's thank him for both
  his hard work and deep expertise on the subject ;-)
        This APIs obviously doesn't do much by itself and works in
  concert with driver support (Jouni already sent you the HostAP
  changes) and userspace (Jouni is updating wpa_supplicant). This is
  also orthogonal with the ongoing work on in-kernel IEEE support (but
  potentially useful).
        The patch is attached, tested with 2.6.11. Normally, I would
  ask you to push that directly in the kernel (99% of the patch has been
  on my web page for ages and it does not affect non-WPA stuff), but
  Jouni convinced me that it should bake a few weeks in wireless-2.6
  first, so that other driver maintainers can get up to speed with it.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Linux v2.6.12-rc4

[PATCH] uml: x86_64 fixes

This fixes some x86_64 bugs -

- maybe_map returns -1 on error instead of 0, which is interpreted as
  physical address 0

- removed an include of ipc.h, which isn't needed

- fixed the calculation of signal frame location

- the signal delivery code is now immune to the stack expansion check

- added a missing include

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Fix process exit race

tt-mode closes switch_pipes in exit_thread_tt and kills processes in
switch_to_tt, if the exit_state is EXIT_DEAD or EXIT_ZOMBIE.

In very rare cases the exiting process can be scheduled out after having set
exit_state and closed switch_pipes (from release_task it calls proc_pid_flush,
which might sleep).  If this process is to be restarted, UML failes in
switch_to_tt with:

   write of switch_pipe failed, err = 9

We fix this by closing switch_pipes not in exit_thread_tt, but later in
release_thread_tt.  Additionally, we set switch_pipe[0] = 0 after closing.
switch_to_tt must not kill "from" process depending on its exit_state, but
must kill it after release_thread was processed only, so it examines
switch_pipe[0] for its decision.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: S390 preparation, arch_align_stack

Only x86 and x86_64 use arch_align_stack(), all other subarches have:

 #define arch_align_stack(x) (x)

So, if this definition is found, UML's own arch_align_stack() should be
skipped.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Use CONFIG variable for address space size

tt/mem.c still uses hardcoded TOP for i386 instead of CONFIG_TOP_ADDR provided
by subarch's Kconfig_XXXX, which would be right.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Turn literal numbers into symbolic constants

So, there I was, looking at my own code, wondering what the magic setjmp
return values did.  This patch turns the constants that are used to make
requests of the initial thread into meaningful symbols.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Makefile cleanup

This eliminates some stuff from arch/um/kernel/Makefile which refers to a
file which has long since been deleted.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Eliminate unusable function

Eliminate the non-inline version of switch_mm, which can't be used,
considering the inline version in asm/mmu_context.h

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: S390 preparation, save an extra register

s390 tt-mode needs to save not only syscall number, but an further register
also.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: S390 preparation, peekusr/pokeusr defined by subarch

s390 needs to change some parts of arch/um/kernel/ptrace.c.  Thus, the code
regarding PEEKUSER and POKEUSER are shifted to arch/um/sys-<subarch>/ptrace.c.

Also s390 debug registers need to be updated, when singlestepping is switched
on / off.  Thus, setting/resetting of singlestepping is centralized in the new
function set_singlestep(), which also inserts the macro
SUBARCH_SET_SINGLESTEP(mode), if defined.

Finally, s390 has the "ieee_instruction_pointer" in its
registers, which also is allowed to be read via

  ptrace( PTRACE_PEEKUSER, getpid(), PT_IEEE_IP, 0);

To implement this feature, sys_ptrace inserts the macro
SUBARCH_PTRACE_SPECIAL, if defined.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: command line handling cleanup

Command line handling cleanups - a couple of things made static and an
unused declaration removed from header.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Remove include/asm-um/elf.h

I accidentally included include/asm-um/elf.h as a real file in a previous
patch.  This patch eliminates it.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: __deprecated makes build unnecessarily noisy

Remove the __deprecated from verify_area_skas and verify_area_tt.  Since
verify_area is itself marked __deprecated, and it is the only caller of
these, then they don't need to be marked.  Marking them only makes the
build noisier.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video/tuner: add VIDEO_G_FREQUENCY and freq range to VIDIOC_G_TUNER

This patch adds a VIDIOC_G_FREQUENCY command to tuner-core.c and sets
lowest and highest tunable frequencies in v4l2_tuner structure returned by
VIDIOC_G_TUNER command.

Signed-off-by: Jiri Benc <jbenc@suse.cz>
Cc: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video/tuner: fix tuner->freq updating

In VIDIOC_S_FREQUENCY command in tuner-core.c, t->freq is set to a new
value before calling set_freq().  This is not necessary, as set_freq() sets
t->freq itself.  Moreover, it causes problems with Philips tuners, as they
need to take into consideration difference between previous and new
frequency.

Signed-off-by: Jiri Benc <jbenc@suse.cz>
Cc: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Fix POWER3/POWER4 compiler error

In separating out support for hardware floating point we missed the fact
that both POWER3 and POWER4 have HW FP.  Enable CONFIG_PPC_FPU for POWER3
and POWER4 fixes the issue.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: enable CONFIG_RTAS_PROC by default

This patch enables CONFIG_RTAS_PROC by default on pSeries.  This will
preserve /proc/ppc64/rtas/rmo_buffer, which is needed by librtas.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] revert msdos partitioning fix

This change from March 3rd causes the partition parsing code to ignore
partitions which have a signature byte of zero.  Turns out that more people
have such partitions than we expected, and their device numbering is coming up
wrong in post-2.6.11 kernels.

So revert the change while we think about the problem a bit more.

Cc: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/block/rd.c: rd_size shouldn't be static

I somehow missed that there is external usage of rd_size on some
architectures.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... parisc-linux.org/~jejb/git/scsi-for-linus-2.6.git

Merge ... /home/rmk/linux-2.6-serial.git

Fix acpi_find_rsdp() - acpi_scan_rsdp takes length, not end

Noticed by Jakub Jermar <jermar@itbs.cz>

[SCSI] correct the sym2 period setting routines

There's a slight bug in the routines in that if the period requires dt,
then the routine will unconditionally set it.  DT may only be set if
Wide is also set, so this turns back on the wide bit.

For domain validation to work correctly, we need to observe the wide bit
absolutely.

Acked by: Matthew Wilcox <willy@debian.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] fix alsa via82xx resume

Trying software suspend on my workstation makes it crash on resume.  The
problem is that via82xx marks the chip_init function as _devinit, but calls
it on resume as well.

Cc: <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: global interrupt queue cleanup

Move the code to set global interrupt queue membership to xics.c,
and remove no longer needed extern declarations.  Also call it on
all cpus (even the boot cpu) to prepare for kexec.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: R Sharada <sharada@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] 8250_pci.c: add comment about enum sorting order

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

[PATCH] ppc64: remove explicit contig_page_data reference

Trivial patch to remove our last direct reference to contig_page_data.
This will make it just that much less hard to seperate NUMA and
DISCONTIG.  Please forward on.  Against 2.6.12-rc1

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: remove unused arch/ppc64/boot/start.c

start.c is not referenced in the arch/ppc64/boot/Makefile

compile tested with the defconfig.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: remove asm/bootinfo.h include

The defines in bootinfo.h are not used, so the include can be removed.
According to Ben, birecs are not used on ppc64:

  on ppc64, we made the decision of enforcing the presence of an
  OF device-tree and either an OF-like client interface or a kexec
  like flattened tree.
  so if your bootloader want to say things to the kernel,
  it can do so by adding properties to the device-tree

compile-tested with defconfig

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: fix reloc_offset comment

The code in reloc_offset is actually subtracting the address in the link
register from the address calculated by the linker.  Perhaps the
extended mnemonic `sub' replaced an original `subf' and the comment just
did not get updated.

        bl      1f
1:      mflr    r3
        LOADADDR(r4,1b)
        sub     r3,r4,r3

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: fix prom.c compile warning

The code in unflatten_device_tree knows that get_property is written to
only return with lenp equal to 1 when also returning a valid pointer.
The gcc 3.3.3 compiler is not able to prove this to itself, so it warns
about a possible uninitialized pointer dereference:

 .../arch/ppc64/kernel/prom.c: In function `unflatten_device_tree':
 .../arch/ppc64/kernel/prom.c:828:
 warning: `p' might be used uninitialized in this function

Unless it is desired to rework the interaction between the two
functions, this will keep the existing behavior but quiet the compiler.

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] arch/ppc64: Replace custom MIN macro

Replace a custom MIN() macro with the min() macro from kernel.h
This patch removes 4 lines of redundant code.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/scsi/sym53c416.c: fix a wrong check

The Coverity checker found that this for loop was wrong.

This patch changes it to what seems to be intended.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fs/udf/udftime.c: fix off by one error

This patch fixes an off by one error found by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] documentation for strncpy()

this clarifies the documentation on the behavier of strncpy().

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] correctly name the Shell sort

As per http://www.nist.gov/dads/HTML/shellsort.html, this should be
referred to as a Shell sort.  Shell-Metzner is a misnomer.

Signed-off-by: Daniel Dickman <didickman@yahoo.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix lib/sort regression test

The regression test in lib/sort.c is currently worthless because the array
that is generated for sorting will be all zeros.  This patch fixes things
so that the array that is generated will contain unsorted integers (that
are not all identical) as was probably intended.

Signed-off-by Daniel Dickman <didickman@yahoo.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix NCR53C9x.c compile warning

drivers/scsi/NCR53C9x.c: In function `esp_do_data':
drivers/scsi/NCR53C9x.c:1838: warning: unused variable `flags'

Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86: geode support fixes

- Changed Name/defines from "Geode GX" to "Geode GX1" for clarification

- Dropped "-march=i586" in favor of "-march=i486"

- Dopped X86_OOSTORE support for Geode GX1

Signed-off-by: Kianusch Sayah Karadji <kianusch@sk-tech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] update Ross Biro bouncing email address

Ross moved.  Remove the bad email address so people will find the correct
one in ./CREDITS.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] CodingStyle: trivial whitespace fixups

When I do a "diff -Nur arch/i386 arch/x86_64" to see what is different between these two
architectures, I see some differences due to whitespace issues only. The attached patch removes
some of the noise by fixing up the following files:
- arch/i386/boot/bootsect.S
- arch/i386/boot/video.S
- arch/x86_64/boot/bootsect.S

Signed-off-by: Daniel Dickman <didickman@yahoo.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Spelling cleanups in shrinker code

Just a few small cleanups to make this coherent english.

Signed-Off-By: Martin Hicks <mort@wildopensource.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ixj* - compile warning cleanup

compile warning cleanup - suggested by Adrian Bunk; remove unmaintained rcs
char strings from source and handle the occurrences of their use, make sure
kernel-userspace issues taken care of; break out into separate patch

Signed-off-by: Stephen Biggs <yrgrknmxpzlk@gawab.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix up a comment still refering to verify_area

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] comments on locking of task->comm

Add some comments about task->comm, to explain what it is near its definition
and provide some important pointers to its uses.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] reiserfs: use NULL instead of 0

Use NULL instead of 0 for pointer (sparse warning):
fs/reiserfs/namei.c:611:50: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cyrix: eliminate bad section references

Fix cyrix section references:
 convert __initdata to __devinitdata.

Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 00000379
R_386_32          .init.data
Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 00000399
R_386_32          .init.data
Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003b3
R_386_32          .init.data
Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003b9
R_386_32          .init.data
Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003bf
R_386_32          .init.data

Signed-of-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] make some things static

This patch makes some needlessly global identifiers static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Arjan van de Ven <arjanv@infradead.org>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: Some missing statics

This patch makes some needlessly global code static.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper dm-emc: Fix a memset

The dm emc hardware handler code memset the hardware handler structure to zero
AFTER it had initialized the structure's spinlock field.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Dave Olien <dmo@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper multipath: Use private workqueue

dm-mpath.c needs to use a private workqueue (like other dm targets already do)
to avoid interfering with users of the default workqueue.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Lars Marowsky-Bree <lmb@suse.de>
Signed-off-by: <mikenc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: tidy dm_suspend

Tidy dm_suspend.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: handle __lock_fs error

Handle error from __lock_fs()

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: let freeze_bdev return error

Allow freeze_bdev() to return an error.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: __unlock_fs void

Make __unlock_fs() void.

From: Christoph Hellwig <hch@lst.de>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: store bdev while frozen

Store the struct block_device while device is frozen, saving us one call to
bdget_disk().

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] revert ext3-writepages-support-for-writeback-mode

This had a fatal lock ranking bug: we do journal_start outside
mpage_writepages()'s lock_page().

Revert the whole thing, think again.

Credit-to: Jan Kara <jack@suse.cz>

For identifying the bug.

Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] orinoco MAINTAINERS update

Add mailing list addresses for Orinoco and update its homepage.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] bttv: fix dst i2c read/write timeout failure.

Attached is a patch to bttv which fixes the following problems.

Affected cards and problems:
~~~~~~~~~~~~~~~~~~~~~~~~
o VP-1020 (200103A) Tuning problems, device detection.
o VP-1020 (DST-MOT) Errors during tuning, device detection fails in a while.
o VP-1030 (DST-CI) Tuning sometimes fails after CI commands.
o VP-2031 (DCT-CI) Tuning problems

The timeout happens before the actual timeout occured in the MCU
on the board, and hence the problems.

Changes: (bttv-i2c.diff)
~~~~~~~~~~~~~~~~~~~~~~~~
o Changed the custom wait queue to wait_event_interruptible_timeout()
      - Suggestion by Johannes Stezenbach.

o Fixed the wait queue timeout problem
      - This fixes the timeout problem on various cards.
      - This problem was visible as many
          * Cannot tune to channels, when signal levels are very low.
          * app_info does not work in some conditions for CI based cards
      - Smaller values worked good for newer cards, but the older cards
suffered, settled down to the worst case values that could happen in any
eventuality.

Signed-off-by: Manu Abraham <manu@kromtek.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove do_sync parameter from __invalidate_device

The only caller that ever sets it can call fsync_bdev itself easily.  Also
update some comments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove outdated comments from filemap.c

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] DAC960: add support for Mylex AcceleRAID 4/5/600

This patch adds support for a new class of DAC960 controllers.  It's based
on the GPLed idac320 driver from IBM for Linux 2.4.18.  That driver is a
fork of the 2.4.18 version of DAC960 that adds support for this new type of
controllers (internally called "GEM Series"), that differ from other DAC960
V2 firmware controllers only in the register offsets and removes support
for all others.

This patch instead integrates support for these controllers into the DAC960
driver.

Thanks to Anders Norrbring for pointing me to the idac320 driver and
testing this patch.

No Signed-Off: line because all code is either copy & pasted from IBM's
idac320 driver or support for other controllers in the 2.6 DAC960 driver.

Note: the really odd formating matches the rest of the DAC960 driver.

Cc: Dave Olien <dmo@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: yenta TI: align irq of func1 to func0 if INTRTIE is set

Make sure that if the INTRTIE bit is set both functions of the cardbus
bridge use the same IRQ before doing any probing...

[ yes i hate the TI bridges for the fact that they are very flexible
  so that so many BIOS vendors get it wrong. ]

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: enable 32-bit memory windows on pd6729

Enable 32-bit memory windows on pd6729 PCI-PCMCIA bridges.

Signed-off-by: Jarkko Raja <jar@pcuf.fi>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] saa6752hs: resolutions handling

This patch handles the VIDIOC_S_FMT and VIDIOC_G_FMT ioctls for the
saa6752hs.

As only 4 preset video formats are supported (SIF, 1/2D1, 2/3D1, D1), we
compute to which the asked resolution is the nearest and apply it.

Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Acked-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Update dontdiff

Additions to the dontdiff list.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove BK documentation

There's no longer a reason to document the obsolete BK usage.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uninline tty_paranoia_check()

Has lots of callsites.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/ide/pci/sis5513.c: section fixes

These three functions are referenced from the __devinitdata
sis5513_chipset.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] setitimer timer expires too early

It seems that the code responsible for this is in kernel/itimer.c:126:

p->signal->real_timer.expires = jiffies + interval;
add_timer(&p->signal->real_timer);

If you request an interval of, lets say 900 usecs, the interval given by
timeval_to_jiffies will be 1.

If you request this when we are half-way between two timer ticks, the
interval will only give 400 usecs.

If we want to guarantee that we never ever give intervals less than
requested, the simple solution would be to change that to:

p->signal->real_timer.expires = jiffies + interval + 1;

This however will produce pathological cases, like having a idle system
being requested 1 ms timeouts will give systematically 2 ms timeouts,
whereas currently it simply gives a few usecs less than 1 ms.

The complex (and more computationally expensive) solution would be to
check the gettimeofday time, and compute the correct number of jiffies.
This way, if we request a 300 usecs timer 200 usecs inside the timer
tick, we can wait just one tick, but not if we are 800 usecs inside the
tick. This would also mean that we would have to lock preemption during
these computations to avoid races, etc.

I've searched the archives but couldn't find this particular issue being
discussed before.

Attached is a patch to do the simple solution, in case anybody thinks
that it should be used.

Signed-Off-By: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] __block_write_full_page() simplification

The `last_bh' logic probably isn't worth much.  In those situations where only
the front part of the page is being written out we will save some looping but
in the vastly more common case of an all-page writeout if just adds more code.

Nick Piggin <nickpiggin@yahoo.com.au>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] __block_write_full_page speedup

Remove all those get_bh()'s and put_bh()'s by extending lock_page() to cover
the troublesome regions.

(get_bh() and put_bh() happen every time whereas contention on a page's lock
in there happens basically never).

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] __block_write_full_page race fix

When running
fsstress -v -d $DIR/tmp -n 1000 -p 1000 -l 2
on an ext2 filesystem with 1024 byte block size, on SMP i386 with 4096 byte
page size over loopback to an image file on a tmpfs filesystem, I would
very quickly hit
BUG_ON(!buffer_async_write(bh));
in fs/buffer.c:end_buffer_async_write

It seems that more than one request would be submitted for a given bh
at a time.

What would happen is the following:
2 threads doing __mpage_writepages on the same page.
Thread 1 - lock the page first, and enter __block_write_full_page.
Thread 1 - (eg.) mark_buffer_async_write on the first 2 buffers.
Thread 1 - set page writeback, unlock page.
Thread 2 - lock page, wait on page writeback
Thread 1 - submit_bh on the first 2 buffers.
=> both requests complete, none of the page buffers are async_write,
   end_page_writeback is called.
Thread 2 - wakes up. enters __block_write_full_page.
Thread 2 - mark_buffer_async_write on (eg.) the last buffer
Thread 1 - finds the last buffer has async_write set, submit_bh on that.
Thread 2 - submit_bh on the last buffer.
=> oops.

So change __block_write_full_page to explicitly keep track of the last bh
we need to issue, so we don't touch anything after issuing the last
request.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix race in __block_prepare_write

Fix a race where __block_prepare_write can leak out an in-flight read
against a bh if get_block returns an error.  This can lead to the page
becoming unlocked while the buffer is locked and the read still in flight.
__mpage_writepage BUGs on this condition.

BUG sighted on a 2-way Itanium2 system with 16K PAGE_SIZE running

fsstress -v -d $DIR/tmp -n 1000 -p 1000 -l 2

where $DIR is a new ext2 filesystem with 4K blocks that is quite
small (causing get_block to fail often with -ENOSPC).

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] 3c59x: only put the device into D3 when we're actually using WOL

During a warm boot the device is in D3 and has troubles coming out of it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] patch-kernel: support non-incremental 2.6.x.y 'stable' patches

Add better support for (non-incremental) 2.6.x.y patches; If an ending
version number if not specified, the script automatically increments the
SUBLEVEL (x in 2.6.x.y) until no more patch files are found; however,
EXTRAVERSION (y in 2.6.x.y) is never automatically incremented but must be
specified fully.

patch-kernel does not normally support reverse patching, but does so when
applying EXTRAVERSION (x.y) patches, so that moving from 2.6.11.y to
2.6.11.z is easy and handled by the script (reverse 2.6.11.y and apply
2.6.11.z).

Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kprobes: Allow multiple kprobes at the same address

Allow registration of multiple kprobes at an address in an architecture
agnostic way.  Corresponding handlers will be invoked in a sequence.  But,
a kprobe and a jprobe can't (yet) co-exist at the same address.

Signed-off-by: Ananth N Mavinakayanahalli <amavin@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Kprobes: Oops! in unregister_kprobe()

kernel oops!  when unregister_kprobe() is called on a non-registered
kprobe.  This patch fixes the above problem by checking if the probe exists
before unregistering.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Kprobes: Incorrect handling of probes on ret/lret instruction

Kprobes could not handle the insertion of a probe on the ret/lret
instruction and used to oops after single stepping since kprobes was
modifying eip/rip incorrectly.  Adjustment of eip/rip is not required after
single stepping in case of ret/lret instruction, because eip/rip points to
the correct location after execution of the ret/lret instruction.  This
patch fixes the above problem.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: header and code cleanup

Remove some definitions and declarations from arch/um/include/skas_ptrace.h,
as they have moved to arch/um/include/sysdep/skas_ptrace.h

Also, remove PTRACE_SIGPENDING support in UML at all.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: remove a dangling symlink

UML: remove no longer needed arch-signal.h

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: s390 preparation, sighandler interface abstraction

s390 passes parameters in registers.  So the only safe way to find out the
address of signal context, error-address and error-type (trap_no), which are
passed to signal handlers as parameters, is to declare these parameters.

So I inserted an subarch-specific macro which holds the declaration of
parameters for signal handlers.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: s390 preparation, delay moved to arch

s390 has fast read access to realtime clock (nanosecond resolution).  So it
makes sense to have an arch-specific implementation not only of __delay, but
__udelay also.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: s390 preparation, checksumming done in arch code

Checksum handling largely depends on the subarch.

Thus, I renamed i386 arch_csum_partial in arch/um/sys-i386/checksum.S back to
csum_partial, removed csum_partial from arch/um/kernel/checksum.c and shifted
EXPORT_SYMBOL(csum_partial) to arch/um/sys-i386/ksyms.c.

Then, csum_partial_copy_to and csum_partial_copy_from were shifted from
arch/um/kernel/checksum.c to arch/um/include/sysdep-i386/checksum.h and
inserted in the calling functions csum_partial_copy_from_user() and
csum_and_copy_to_user().

Now, arch/um/kernel/checksum.c is empty and removed.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: s390 preparation, linkage.h inherited from host

This patch replaces the contents of include/asm-um/linkage.h
by
    #include "asm/arch/linkage.h"

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: s390 preparation, elf.h

This patch make elh.h a symlink to the new arch-specific include files of the
form elf-<subarch>.h, as in the same way already is done for some other
includes.  Also moves Elf-stuff from archparam-<subarch>.h and elf.h to the
new elf-<subarch>.h files.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: hostfs failed mount handling

This cleans up the error handling and fixes a crash if a hostfs mount fails.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: inclusion cleanup

The completion cleanup got rid of some semaphores, but didn't remove the
inclusion of asm/semaphore.h from xterm_kern.c.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: tidy Makefile.rules

Just some breaking of some overly-long lines.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Fix SIGWINCH relaying

This makes SIGWINCH work again, and fixes a couple of SIGWINCH-associated
crashes.  First, the sigio thread disables SIGWINCH because all hell breaks
loose if it ever gets one and tries to call the signal handling code.  Second,
there was a problem with deferencing tty structs after they were freed.  The
SIGWINCH support for a tty wasn't being turned off or freed after the tty went
away.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: S390 preparation, abstract host page fault data

This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.

It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.

The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt

Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.

Also, the number of macros necessary is reduced to

FAULT_ADDRESS(struct faultinfo)
    extracts the faulting address from faultinfo

FAULT_WRITE(struct faultinfo)
    extracts the "is_write" flag

SEGV_IS_FIXABLE(struct faultinfo)
    is true for the fixable segvs, i.e. (TRAP == 14)
    on i386

UPT_FAULTINFO(regs)
    result is (struct faultinfo *) to the faultinfo
    in regs->skas.faultinfo

GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
    copies the relevant parts of the sigcontext to
    struct faultinfo.

On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.

The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.

Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix a ptrace call

This fixes write_ldt_entry to treat userspace_pid as an array.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: finish cross-build support

O=... builds support.  Very easy, actually.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix missing subdir in x86_64

make distclean et.al.  are missing arch/um/sys-x86_64/utils; fixed the same
way we have it done for sys-i386 counterpart.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: cross-build support : mk_task and mk_constants

helpers in arch/um/util (mk_task and mk_constants) converted.  That's it -
none of the helpers depends on build and target being the same architecture
anymore.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: cross-build support : mk_thread

mk_thread converted

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: cross-build support : kernel_offsets

The next group of helpers is a bit trickier - they want the constants similar
to those in user-offsets.h, but we need target sc.h for it.  So we can't put
that into user-offsets (sc.h depends on it) and need the second generated
header for that stuff (kernel-offsets.h.  BFD...

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: cross-build support: mk_sc

Ditto for mk_sc

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: cross-build support : mk_ptregs

mk_ptregs converted.  Nothing new here, it's the same situation as with
mk_user_constants.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>