Antti Palosaari [Sun, 13 Jul 2014 01:12:05 +0000 (04:12 +0300)]
msi2500: move msi3101 out of staging and rename
Move msi3101 out of staging and rename to msi2500.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sat, 19 Jul 2014 00:22:08 +0000 (21:22 -0300)]
[media] airspy: fill FMT buffer size
Fill FMT buffer size field in order to inform app which will be
used streaming buffer size. Currently driver doesn't allow buffer
size value proposed by application.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 23:21:16 +0000 (20:21 -0300)]
[media] DocBook media: v4l2_sdr_format buffersize field
New field buffersize was added to inform application maximum
buffer size used. Add it to documentation too.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 19:22:29 +0000 (16:22 -0300)]
[media] rtl2832_sdr: fill FMT buffer size
Fill FMT buffer size field in order to inform app which will be
used streaming buffer size. Currently driver doesn't allow buffer
size value proposed by application.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 18:28:24 +0000 (15:28 -0300)]
[media] v4l: videodev2: add buffer size to SDR format
Add buffer size field to struct v4l2_sdr_format. It is used for
negotiate streaming buffer size between application and driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Matthias Schwarzott [Tue, 15 Jul 2014 07:58:40 +0000 (04:58 -0300)]
[media] si2157: Add get_if_frequency callback
This is needed for PCTV 522e support.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Matthias Schwarzott [Tue, 15 Jul 2014 19:34:36 +0000 (16:34 -0300)]
[media] si2157: Add support for spectral inversion
This is needed for PCTV 522e support.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Matthias Schwarzott [Tue, 15 Jul 2014 19:34:35 +0000 (16:34 -0300)]
[media] em28xx-dvb: Prepare for si2157 driver getting more parameters
Modify all users of si2157_config to correctly initialize all not
listed values to 0.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Matthias Schwarzott [Tue, 15 Jul 2014 19:34:34 +0000 (16:34 -0300)]
[media] cxusb: Prepare for si2157 driver getting more parameters
Modify all users of si2157_config to correctly initialize all not
listed values to 0.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Fri, 18 Jul 2014 05:41:12 +0000 (02:41 -0300)]
[media] si2157: Use name si2157_ops instead of si2157_tuner_ops
The struct prototype is defined at the beginning of the code as
"si2157_ops" but the real struct is called "si2157_tuner_ops".
This is causing the name to be empty on this info msg: si2157 16-0060:
si2157: found a '' in cold state
[crope@iki.fi: commit msg from Luis email reply]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Cc: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Luis Alves [Thu, 17 Jul 2014 22:43:37 +0000 (19:43 -0300)]
[media] si2168: Support Si2168-A20 firmware downloading
This adds support for the Si2168-A20 firmware download.
Extracting the firmware:
wget http://www.tbsdtv.com/download/document/tbs6281/tbs6281-t2-t-driver_v1.0.0.6.zip
unzip tbs6281-t2-t-driver_v1.0.0.6.zip
dd if=tbs-6281_x64/tbs6281_64.sys of=dvb-demod-si2168-a20-01.fw count=28656 bs=1 skip=
1625088
md5sum:
32e06713b33915f674bfb2c209beaea5 /lib/firmware/dvb-demod-si2168-a20-01.fw
Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Luis Alves [Thu, 17 Jul 2014 20:56:44 +0000 (17:56 -0300)]
[media] si2168: Remove testing for demod presence on probe
Testing demod presence on probe fails if the demod was sleep mode.
Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Luis Alves [Thu, 17 Jul 2014 19:38:08 +0000 (16:38 -0300)]
[media] si2168: Fix i2c_add_mux_adapter return value
In case of failure the return value was always 0. Return proper
error code (ENODEV) instead.
Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Thu, 17 Jul 2014 18:43:27 +0000 (15:43 -0300)]
[media] si2168: improve scanning performance
Improve scanning performance by setting property 0301 with a value
from Windows driver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Luis Alves [Thu, 17 Jul 2014 17:31:28 +0000 (14:31 -0300)]
[media] si2168: Set symbol rate for DVB-C
This patch adds symbol rate setting to the driver.
Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 00:57:14 +0000 (21:57 -0300)]
[media] MAINTAINERS: add airspy driver
Video4Linux2 driver for AirSpy SDR device.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 00:47:48 +0000 (21:47 -0300)]
[media] airspy: print notice to point SDR API is not 100% stable yet
Print notice on driver load: "SDR API is still slightly
experimental and functionality changes may follow". It is just
remind possible used SDR API is very new and surprises may occur.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 00:42:24 +0000 (21:42 -0300)]
[media] airspy: move out of staging into drivers/media/usb
Move it out of staging into media like all the other SDR drivers
too. There is no good reasons to keep these SDR drivers in staging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 18 Jul 2014 00:15:11 +0000 (21:15 -0300)]
[media] airspy: remove v4l2-compliance workaround
v4l2-compliance is now happy with frequency ranges where both lower
and upper limit is same.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 15 Jul 2014 00:19:29 +0000 (21:19 -0300)]
[media] MAINTAINERS: update RTL2832_SDR location
It is moved out of staging to media.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 15 Jul 2014 00:16:50 +0000 (21:16 -0300)]
[media] rtl2832_sdr: print notice to point SDR API is not 100% stable yet
SDR API is very new and surprises may occur. Due to that print
notice to remind possible users.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 15 Jul 2014 00:11:12 +0000 (21:11 -0300)]
[media] rtl2832_sdr: put complex U16 format behind module parameter
Move emulated format behind module parameter as those are not
supported. Format conversions will be on library eventually.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Mon, 14 Jul 2014 23:08:38 +0000 (02:08 +0300)]
rtl2832_sdr: move from staging to media
Move rtl2832_sdr driver module from staging to media.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sun, 13 Jul 2014 00:48:39 +0000 (21:48 -0300)]
[media] Kconfig: sub-driver auto-select SPI bus
Mirics MSi001 and MSi2500 drivers uses SPI bus. Due to that we need
auto-select it too.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sun, 13 Jul 2014 00:43:12 +0000 (21:43 -0300)]
[media] Kconfig: add SDR support
Add software defined radio device support for media Kconfig.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sat, 12 Jul 2014 11:58:32 +0000 (08:58 -0300)]
[media] MAINTAINERS: update MSI001 driver location
The driver moved out of staging. Update MAINTAINERS
accordingly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sat, 12 Jul 2014 11:53:22 +0000 (14:53 +0300)]
msi001: move out of staging
Move MSi001 driver from staging to drivers/media/tuners/.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Mauro Carvalho Chehab [Mon, 21 Jul 2014 23:29:54 +0000 (20:29 -0300)]
staging/airspy: fix a compilation warning
drivers/staging/media/airspy/airspy.c: In function 'airspy_stop_streaming':
drivers/staging/media/airspy/airspy.c:569:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 11 Jul 2014 20:04:42 +0000 (17:04 -0300)]
[media] DocBook: V4L: add V4L2_SDR_FMT_CS14LE - 'CS14'
V4L2_SDR_FMT_CS14LE is complex signed 14-bit sample format, used
for software defined radio devices.
[m.chehab@samsung.com: remove V4L2_FL_USE_FH_PRIO setting to avoid
compilation breakage, as this flag doesn't exist anymore]
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 11 Jul 2014 19:35:47 +0000 (16:35 -0300)]
[media] v4l: uapi: add SDR format CS14
V4L2_SDR_FMT_CS14LE - Complex signed 14-bit IQ sample
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 11 Jul 2014 18:35:05 +0000 (15:35 -0300)]
[media] DocBook: V4L: add V4L2_SDR_FMT_CS8 - 'CS08'
V4L2_SDR_FMT_CS8 is complex signed 8-bit sample format, used for
software defined radio devices.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 11 Jul 2014 16:25:14 +0000 (13:25 -0300)]
[media] v4l: uapi: add SDR format CS8
V4L2_SDR_FMT_CS8 - Complex signed 8-bit IQ sample
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Sat, 28 Jun 2014 00:30:55 +0000 (21:30 -0300)]
[media] airspy: AirSpy SDR driver
AirSpy SDR driver.
Thanks to Youssef Touil and Benjamin Vernoux for support, help and
hardware!
http://airspy.com/
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 11 Jul 2014 16:14:27 +0000 (13:14 -0300)]
[media] DocBook: V4L: add V4L2_SDR_FMT_RU12LE - 'RU12'
Document V4L2_SDR_FMT_RU12LE format. It is real unsigned 12-bit
little endian sample inside 16-bit space. Used by software defined
radio devices.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 27 Jun 2014 20:42:18 +0000 (17:42 -0300)]
[media] v4l: uapi: add SDR format RU12LE
V4L2_SDR_FMT_RU12LE - Real unsigned 12-bit little endian sample
inside 16-bit (2 byte). V4L2 FourCC: RU12.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Thu, 12 Jun 2014 16:09:42 +0000 (13:09 -0300)]
[media] v4l: ctrls: Unlocked variants of v4l2_ctrl_s_ctrl{,_int64}()
Implement unlocked variants of v4l2_ctrl_s_ctrl() and
v4l2_ctrl_s_ctrl_int64(). As drivers need to set controls as they access
driver internal state elsewhere than in the control framework unlocked
variants of these functions become handy.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Thu, 12 Jun 2014 16:09:40 +0000 (13:09 -0300)]
[media] v4l: ctrls: Provide an unlocked variant of v4l2_ctrl_modify_range()
Drivers may use the v4l2_ctrl_modify_range() internally as part of other
operations that need to be both serialised using a driver's lock which can
also be used to serialise access to the control handler. Provide an unlocked
version of the function, __v4l2_ctrl_modify_range() which then may be used
by drivers for the purpose.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Thu, 12 Jun 2014 16:09:39 +0000 (13:09 -0300)]
[media] v4l: ctrls: Move control lock/unlock above the control access functions
The v4l2_ctrl_{,un}lock will be needed elsewhere. Define them before the
functions that perform operations on controls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 17 Jul 2014 18:27:39 +0000 (15:27 -0300)]
[media] saa7146: fix compile warning
Fall-out from the recent struct v4l2_framebuffer change.
drivers/media/common/saa7146/saa7146_fops.c: In function ‘saa7146_vv_init’:
drivers/media/common/saa7146/saa7146_fops.c:536:6: warning: assignment from incompatible pointer type [enabled by default]
fmt = &vv->ov_fb.fmt;
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Andrey Utkin [Thu, 17 Jul 2014 16:27:16 +0000 (13:27 -0300)]
[media] staging/media/davinci_vpfe/dm365_ipipeif.c: fix negativity check
[linux-3.16-rc5/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:210]:
(style) Checking if unsigned variable 'val' is less than zero.
val = get_oneshot_mode(ipipeif->input);
if (val < 0) {
pr_err("ipipeif: links setup required");
return -EINVAL;
}
but
static int get_oneshot_mode(enum ipipeif_input_entity input)
Introduced temporary variable for negativity check.
"val" is afterwards used in a lot of bitwise operations, so changing its type
to signed is not safe, according to CERT C Secure Coding Standards chapter
INT13-C: "Use bitwise operators only on unsigned operands"
https://www.securecoding.cert.org/confluence/display/seccode/INT13-C.+Use+bitwise+operators+only+on+unsigned+operands
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80521
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Ian Molton [Sat, 5 Jul 2014 22:26:20 +0000 (19:26 -0300)]
[media] adv7180: Remove duplicate unregister call
This driver moved over to v4l2_async_unregister_subdev()
but still retained a call to v4l2_unregister_subdev(). Remove.
Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
panpan liu [Wed, 16 Jul 2014 01:51:33 +0000 (22:51 -0300)]
[media] s5p-mfc: limit the size of the CPB
The CPB size is limited by the hardware. Add this limit to the s_fmt.
Signed-off-by: panpan liu <panpan1.liu@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 11 Jul 2014 09:36:16 +0000 (06:36 -0300)]
[media] coda: simplify IRAM setup
OVL and BTP IRAM buffers are never used, setup the bits for
for DBK/BIT/IP usage depending on CODA version in one place.
Also, use a simple allocator function and group IRAM addresses
and size in a coda_aux_buf structure.
This is done in preparation for CODA960 support.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 11 Jul 2014 09:36:15 +0000 (06:36 -0300)]
[media] coda: fix internal framebuffer allocation size
This error was introduced by
5677e3b04d3b3961200aa2bb9cc715e709eafeb9
"[media] coda: update CODA7541 to firmware 1.4.50".
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 11 Jul 2014 09:36:14 +0000 (06:36 -0300)]
[media] coda: fix h.264 quantization parameter range
If bitrate is not set, the encoder is running in VBR mode, with the
I- and P-frame quantization parameters configured from userspace.
For the quantization parameters, 0 is a valid value.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 11 Jul 2014 09:36:13 +0000 (06:36 -0300)]
[media] coda: fix readback of CODA_RET_DEC_SEQ_FRAME_NEED
Previously we'd add one to this value, allocating one additional, superfluous
internal buffer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 11 Jul 2014 09:36:12 +0000 (06:36 -0300)]
[media] coda: fix decoder I/P/B frame detection
Currently the rotator unit is used to copy decoded frames out into buffers
provided by videobuf2. Since the CODA reports the I/P/B frame type of the
last decoded frame, and this frame will be copied out in a later device_run,
depending on display order, we have to store the frame type until such time.
This patch also adds the B-frame type.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Jacek Anaszewski [Thu, 10 Jul 2014 09:00:39 +0000 (06:00 -0300)]
[media] s5p-mfc: Fix selective sclk_mfc init
fc906b6d "Remove special clock usage in driver" removed
initialization of MFC special clock, arguing that there's
no need to do it explicitly, since it's one of MFC gate clock's
dependencies and gets enabled along with it. However, there's
no promise of keeping this hierarchy across Exynos SoC
releases, therefore this approach fails to provide a stable,
portable solution.
Out of all MFC versions, only v6 doesn't use special clock at all.
For other versions log a message only in case clk_get fails,
as not all the devices with the same MFC version require
initializing the clock explicitly.
Signed-off-by: Mateusz Zalega <m.zalega@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Maurizio Lombardi [Fri, 27 Jun 2014 09:28:31 +0000 (06:28 -0300)]
[media] s5p: fix error code path when failing to allocate DMA memory
In the s5p_mfc_alloc_firmware() function there are some mistakes
where the code checks whether the DMA memory is properly allocated or
not.
First of all dma_alloc_coherent() returns NULL in case of error.
The code also checked two times fw_virt_addr, ignoring
the bank2_virt pointer.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Dan Carpenter [Mon, 9 Jun 2014 15:21:35 +0000 (12:21 -0300)]
[media] zoran: remove duplicate ZR050_MO_COMP define
The ZR050_MO_COMP define is cut and pasted twice so we can delete the
second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Himangi Saraogi [Tue, 15 Jul 2014 21:29:53 +0000 (18:29 -0300)]
[media] saa7164-dvb: Remove unnecessary null test
This patch removes the null test on dvb. dvb is initialized at the
beginning of the function to &port->dvb. Since port is dereferenced
prior to the null test, port must be a valid pointer, and
&port->dvb cannot be null.
The following Coccinelle script is used for detecting the change:
@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@
*e = &f->g
<+...
f->y
...+>
*if (e != NULL || ...)
S1 else S2
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Luke Hart [Sat, 12 Jul 2014 18:48:22 +0000 (15:48 -0300)]
[media] radio-bcm2048.c: Fix some checkpatch.pl errors
Fix the following warnings reported in radio-bcm2048.c:
WARNING: else is not generally useful after a break or return
374: FILE: radio-bcm2048.c:374:
+ return 0;
+ } else {
WARNING: else is not generally useful after a break or return
728: FILE: radio-bcm2048.c:728:
+ return BCM2048_DE_EMPHASIS_75us;
+ else
WARNING: unchecked sscanf return value
1974: FILE: radio-bcm2048.c:1974:
+ sscanf(buf, mask, &value); \
WARNING: Missing a blank line after declarations
2245: FILE: radio-bcm2048.c:2245:
+ unsigned char tmpbuf[3];
+ tmpbuf[i] = bdev->rds_info.radio_text[bdev->rd_index+i+2];
WARNING: Possible unnecessary 'out of memory' message
2601: FILE: radio-bcm2048.c:2601:
+ if (!bdev) {
+ dev_dbg(&client->dev, "Failed to alloc video device.\n");
The following error was left since it seems to be a false positive:
ERROR: Macros with complex values should be enclosed in parenthesis
+#define DEFINE_SYSFS_PROPERTY(prop, signal, size, mask, check) \
+property_write(prop, signal size, mask, check) \
+property_read(prop, size, mask)
Signed-off-by: Luke Hart <luke.hart@birchleys.eu>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Andrey Utkin [Thu, 10 Jul 2014 12:32:25 +0000 (09:32 -0300)]
[media] media: pvrusb2: make logging code sane
The issue was discovered by static analysis. It turns out that code is
somewhat insane, being
if (x) {...} else { if (x) {...} }
Edited it to do the only reasonable thing, which is to log the
information about the failed call. The most descriptive logging commands
set is taken from original code.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79801
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Anil Belur [Wed, 9 Jul 2014 06:06:37 +0000 (03:06 -0300)]
[media] staging: media: bcm2048: radio-bcm2048.c - removed IRQF_DISABLED macro
- this patch removes IRQF_DISABLED macro, as this is
deprecated/noop.
Signed-off-by: Anil Belur <askb23@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Andrey Utkin [Tue, 8 Jul 2014 15:23:33 +0000 (12:23 -0300)]
[media] solo6x10: update GOP size, QP immediately
Previously, it was needed to reopen device to update GOP size and
quantization parameter. Now we update device registers with new values
immediately.
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Andrey Utkin [Tue, 8 Jul 2014 15:23:32 +0000 (12:23 -0300)]
[media] solo6x10: expose encoder quantization setting as V4L2 control
solo6*10 boards have configurable quantization parameter which takes
values from 0 to 31, inclusively.
This change enables setting it with ioctl VIDIOC_S_CTRL with id
V4L2_CID_MPEG_VIDEO_H264_MIN_QP.
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Andreas Weber [Mon, 7 Jul 2014 14:00:05 +0000 (11:00 -0300)]
[media] DocBook media: fix number of bits filled with zeros for SRGBB12
The total number of bits is 16 (12+4). Fix it.
Signed-off-by: Andreas Weber <andy.weber.aw@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Geert Uytterhoeven [Sun, 6 Jul 2014 08:58:41 +0000 (05:58 -0300)]
[media] staging/solo6x10: SOLO6X10 should select BITREVERSE
If CONFIG_SOLO6X10=y, but CONFIG_BITREVERSE=m:
drivers/built-in.o: In function `solo_osd_print':
(.text+0x1c7a1f): undefined reference to `byte_rev_table'
make: *** [vmlinux] Error 1
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Sat, 5 Jul 2014 08:51:55 +0000 (05:51 -0300)]
[media] hdpvr: fix reported HDTV colorspace
The colorspace for HDTV is REC709, not SMPTE240M.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 27 Jun 2014 14:15:42 +0000 (11:15 -0300)]
[media] cx23885: add support for Hauppauge ImpactVCB-e
Add support for Hauppauge model 71100: WinTV-ImpactVCB-e
(PCIe, Retail, half height)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 17 Jul 2014 21:45:45 +0000 (18:45 -0300)]
[media] v4l2-ioctl: clips, clipcount and bitmap should not be zeroed
Otherwise you cannot get the current clip and bitmap information from
an overlay.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 13 Jun 2014 07:31:06 +0000 (04:31 -0300)]
[media] v4l2-ioctl: call g_selection before calling cropcap
If the vidioc_cropcap op is implemented by the driver then the v4l2
core will call that directly.
If g_selection is available, then the core cropcap implementation
uses g_selection to fill in the bounds and defrect and it sets the
pixelaspect to 1x1.
But if both are available, then I would like to use g_selection to
fill in defrect and bounds before calling cropcap. That way the
driver's cropcap implementation doesn't have to set defrect or
bounds.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Mon, 24 Mar 2014 12:51:34 +0000 (09:51 -0300)]
[media] v4l2-ioctl: clear reserved field of G/S_SELECTION
Be sure that the reserved fields are cleared.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 14 Mar 2014 14:52:38 +0000 (11:52 -0300)]
[media] v4l2-ioctl: remove pointless INFO_FL_CLEAR
The edid field is the last field of the struct, so there is nothing to clear.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Mon, 3 Mar 2014 09:47:38 +0000 (06:47 -0300)]
[media] v4l2-dev: don't debug poll unless the debug level > 2
Some applications poll a lot, so prevent the poll message from flooding
the log.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Wed, 26 Feb 2014 21:22:05 +0000 (18:22 -0300)]
[media] videodev2.h: add V4L2_FIELD_HAS_T_OR_B macro
Add a macro to test if the field consists of a single top
or bottom field. Anyone who needs to work with fields as opposed to
frame will need this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 10 Jul 2014 22:51:26 +0000 (19:51 -0300)]
[media] v4l2-dev: streamon/off is only a valid ioctl for video, vbi and sdr
The VIDIOC_STREAMON/OFF ioctls are not valid for radio devices, just
like the other streaming I/O ioctls. Add the streamon/off ioctls
to the other streaming I/O ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 11 Jul 2014 10:01:39 +0000 (07:01 -0300)]
[media] v4l2-ioctl.c: fix enum_freq_bands handling
If the driver supports enum_freq_bands, but only for certain device
nodes, then it may return -ENOTTY. But in that case the code should
fall into the fall-back case where the current tuner/modulator range
is returned.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Sat, 12 Jul 2014 10:54:26 +0000 (07:54 -0300)]
[media] v4l2-ioctl.c: check vfl_type in ENUM_FMT
The other format ioctls (g/s/try_fmt) all check if the passed buffer type
makes sense for the device node's vfl_type. E.g. it makes no sense for a
VBI buffer type to be passed through a video node instead of a vbi node.
But this check was missing in ENUM_FMT which can cause a problem if you
have both video and sdr device nodes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Tue, 17 Jun 2014 13:43:46 +0000 (10:43 -0300)]
[media] DocBook media: fix incorrect header reference
The text referred to videodev.h when videodev2.h was meant. Fixed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 13 Jun 2014 12:28:59 +0000 (09:28 -0300)]
[media] DocBook media: add missing dqevent src_change field
The v4l2_event union has a new src_change field, but that was never
added to the VIDIOC_DQEVENT documentation of that union. Fixed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 13 Jun 2014 07:47:37 +0000 (04:47 -0300)]
[media] DocBook media: fix wrong spacing
There shouldn't be any spaces after <constant> or before </constant>.
This leads to ugly results like: 'image size set by VIDIOC_S_FMT .'
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Fri, 6 Jun 2014 15:08:59 +0000 (12:08 -0300)]
[media] MAINTAINERS: Add the OMAP4 ISS driver
Update the OMAP Image Signal Processor entry to cover both the OMAP3 ISP
and OMAP4 ISS.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 3 Jun 2014 22:25:06 +0000 (19:25 -0300)]
[media] v4l: omap4iss: Signal fatal errors to the vb2 queue
When a fatal error occurs in the pipeline signal it to the vb2 queue
with a call to vb2_queue_error(). The queue will then take care to
return -EIO when preparing buffers, remove the driver-specific code that
now duplicates that check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Fri, 6 Jun 2014 14:59:04 +0000 (11:59 -0300)]
[media] v4l: omap4iss: Use the devm_* managed allocators
This simplifies remove and error code paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 3 Jun 2014 20:49:41 +0000 (17:49 -0300)]
[media] v4l: omap4iss: Add module debug parameter
The parameter is used to initialize the video node debug field and
activate the V4L debug infrastructure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 3 Jun 2014 22:23:16 +0000 (19:23 -0300)]
[media] v4l: omap4iss: Don't reinitialize the video qlock at every streamon
Initialize the spin lock once only when initializing the video object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Vitaly Osipov [Thu, 5 Jun 2014 07:07:48 +0000 (04:07 -0300)]
[media] v4l: omap4iss: Copy paste error in iss_get_clocks
It makes more sense to return PTR_ERR(iss->iss_ctrlclk) here. The
current code looks like an oversight in pasting the block just above
this one.
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Arnd Bergmann [Wed, 11 Jun 2014 14:49:31 +0000 (11:49 -0300)]
[media] v4l: omap4iss: tighten omap4iss dependencies
The OMAP4 camera support depends on I2C and VIDEO_V4L2, both
of which can be loadable modules. This causes build failures
if we want the camera driver to be built-in.
This can be solved by turning the option into "tristate",
which unfortunately causes another problem, because the
driver incorrectly calls a platform-internal interface
for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel.
Instead, this patch just forbids the invalid configurations
and ensures that the driver can only be built if all its
dependencies are built-in.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 3 Jun 2014 21:53:25 +0000 (18:53 -0300)]
[media] v4l: vb2: Add fatal error condition flag
When a fatal error occurs that render the device unusable, the only
options for a driver to signal the error condition to userspace is to
set the V4L2_BUF_FLAG_ERROR flag when dequeuing buffers and to return an
error from the buffer prepare handler when queuing buffers.
The buffer error flag indicates a transient error and can't be used by
applications to detect fatal errors. Returning an error from vb2_qbuf()
is thus the only real indication that a fatal error occurred. However,
this is difficult to handle for multithreaded applications that requeue
buffers from a thread other than the control thread. In particular the
poll() call in the control thread will not notify userspace of the
error.
This patch adds an explicit mechanism to report fatal errors to
userspace. Drivers can call the vb2_queue_error() function to signal a
fatal error. From this moment on, buffer preparation will return -EIO to
userspace, and vb2_poll() will set the POLLERR flag and return
immediately. The error flag is cleared when cancelling the queue, either
at stream off time (through vb2_streamoff) or when releasing the queue
with vb2_queue_release().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 3 Jun 2014 20:41:06 +0000 (17:41 -0300)]
[media] v4l: vb2: Don't return POLLERR during transient buffer underruns
The V4L2 specification states that
"When the application did not call VIDIOC_QBUF or VIDIOC_STREAMON yet
the poll() function succeeds, but sets the POLLERR flag in the revents
field."
The vb2_poll() function sets POLLERR when the queued buffers list is
empty, regardless of whether this is caused by the stream not being
active yet, or by a transient buffer underrun.
Bring the implementation in line with the specification by returning
POLLERR if no buffer has been queued only when the queue is not
streaming. Buffer underruns during streaming are not treated specially
anymore and just result in poll() blocking until the next event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Sat, 31 May 2014 00:45:48 +0000 (21:45 -0300)]
[media] v4l: vsp1: uds: Fix scaling of alpha layer
Pixel color components can be scaled using either bilinear interpolation
or a multitap filter. The multitap filter provides better results, but
can't be selected when the alpha layer need to be scaled down by more
than 1/2.
Disable alpha scaling when the input has a fixed alpha value, and
program the UDS to output a fixed alpha value in that case. This ensures
the multitap filter will be used whenever possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 28 May 2014 01:46:30 +0000 (22:46 -0300)]
[media] v4l: vsp1: bru: Make the background color configurable
Expose the background color to userspace through the V4L2_CID_BG_COLOR
control.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 27 May 2014 23:35:36 +0000 (20:35 -0300)]
[media] v4l: vsp1: bru: Support non-premultiplied colors at the BRU output
The BRU outputs premultiplied colors, enable color data normalization
when the format configured at the output of the pipeline isn't
premultiplied.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 27 May 2014 23:35:36 +0000 (20:35 -0300)]
[media] v4l: vsp1: bru: Support premultiplied alpha at the BRU inputs
Adjust the BRU blending formula to avoid the multiplication by alpha
when the corresponding input format is premultiplied. As this requires
access to the RPFs connected to the BRU inputs from the BRU module,
store pointers to the RPFs in the BRU structure when validating the
pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 21 May 2014 22:00:05 +0000 (19:00 -0300)]
[media] v4l: vsp1: Add V4L2_CID_ALPHA_COMPONENT control support
The control is used to configure the fixed alpha channel value, when
reading from memory in the RPF or writing to memory in the WPF.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 26 May 2014 23:12:53 +0000 (20:12 -0300)]
[media] v4l: vsp1: Add alpha channel support to the memory ports
Support ARGB formats on the RPF side by reading the alpha component from
memory and on the WPF side by writing it to memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 26 May 2014 22:57:21 +0000 (19:57 -0300)]
[media] v4l: vsp1: Switch to XRGB formats
The driver ignores the alpha component on output video nodes and
hardcodes the alpha component to 0 on capture video nodes. Make this
explicit by exposing XRGB formats.
Compatibility with existing userspace applications is handled by
selecting the XRGB format corresponding to the requested old RGB format.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 28 May 2014 16:10:33 +0000 (13:10 -0300)]
[media] v4l: vsp1: wpf: Clear RPF to WPF association at stream off time
The VSP1 stores the video pipelines' input (RPF) to output (WPF)
mappings in a WPF register. An RPF must never be associated with
multiple WPFs, even if all of those WPFs but one are unused, otherwise
the hardware won't function properly.
The driver doesn't ensure this correctly as it never clears the
mappings. An RPF used with one WPF and later with a different WPF will
lead to malfunction, as it will be associated with two WPFs. Clear the
mappings at stream off time to fix this.
Reported-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 27 May 2014 23:35:36 +0000 (20:35 -0300)]
[media] v4l: vsp1: wpf: Simplify cast to pipeline structure
Use the subdev pointer directly to_vsp1_pipeline() macro instead of
casting from the subdev to the wpf object and back to the subdev.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Sat, 31 May 2014 23:30:11 +0000 (20:30 -0300)]
[media] v4l: vsp1: sru: Make the intensity controllable during streaming
The control value is currently stored in the SRU structure by the
control set handler and written to the hardware at stream on time,
making control set during streaming ineffective. Fix it by writing to
the registers from within the control set handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 21 May 2014 22:00:05 +0000 (19:00 -0300)]
[media] v4l: vsp1: sru: Fix the intensity control default value
The default value isn't set and defaults to 0, which isn't in the 1-6
min-max range. Fix it by setting the default value to 1.
This shoud have been caught when checking the control handler error
field at initialization time, but the check was missing. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Sat, 31 May 2014 13:40:51 +0000 (10:40 -0300)]
[media] v4l: vsp1: Setup control handler automatically at stream on time
When setting a control directly on a subdev node the VSP1 driver doesn't
guarantee that the device is powered on. This leads to crashes when the
control handlers writes to hardware registers. One easy way to fix this
is to ensure that the device gets powered on when a subdev node is
opened. However, this consumes power unnecessarily, as there's no need
to power the device on when setting formats on the pipeline.
Furthermore, control handler setup at entity init time suffers from the
same problem as the device isn't powered on easier.
Fix this by extend the entity base object to setup the control handler
automatically when starting the stream. Entities must then skip writing
to registers in the set control handler when not streaming, which can be
tested with the new vsp1_entity_is_streaming() helper function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Sat, 31 May 2014 11:50:32 +0000 (08:50 -0300)]
[media] v4l: vsp1: Propagate vsp1_device_get errors to the callers
Modify the vsp1_device_get() function to return an error code instead of
a pointer to the VSP1 device, and use the return value in the callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 28 May 2014 15:49:13 +0000 (12:49 -0300)]
[media] v4l: vsp1: Cleanup video nodes at removal time
Video nodes created and initialized in the RPF and WPF init code paths
are never unregistered, and the related resources (videobuf alloc
context and media entity) never released.
Fix this by storing a pointer to the vsp1_video object in vsp1_entity
and calling vsp1_video_cleanup() from vsp1_entity_destroy(). This also
allows simplifying the init error code paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Tue, 27 May 2014 15:59:39 +0000 (12:59 -0300)]
[media] v4l: vsp1: Fix typos
Several macros were mistakenly prefixed with VPS1 instead of VSP1. Fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 23 Jun 2014 20:15:02 +0000 (17:15 -0300)]
[media] v4l: vsp1: Fix pipeline stop timeout
If the pipeline was already stopped when stopping the stream, no
frame end interrupt will be generated and the driver will time out
waiting for the pipeline to stop.
Fix this by setting the pipeline state to STOPPED when the pipeline is
idle waiting for frames to process, and to STOPPING at stream stop time
only when the pipeline is currently RUNNING.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 23 Jun 2014 19:57:22 +0000 (16:57 -0300)]
[media] v4l: vsp1: Release buffers at stream stop
videobuf2 expects no buffer to be owned by the driver when the
stop_stream queue operation returns. As the vsp1 driver fails to do so,
a warning is generated at stream top time.
Fix this by releasing all buffers queued on the IRQ queue in the
stop_stream operation handler and marking them as erroneous.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 23 Jun 2014 21:40:49 +0000 (18:40 -0300)]
[media] v4l: vsp1: Fix routing cleanup when stopping the stream
Commit
d9b45ed3d8b75e8cf38c8cd1563c29217eecba27 ("v4l: vsp1: Support
multi-input entities") reworked pipeline routing configuration and
introduced a bug by writing to the entities routing registers without
first checking whether the entity had a routing register. This results
in overwriting the value at offset 0 of the device register space when
stopping the stream.
Fix this by skipping routing register write for entities without a
routing register.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 23 Jun 2014 21:00:22 +0000 (18:00 -0300)]
[media] v4l: vb2: Fix stream start and buffer completion race
videobuf2 stores the driver streaming state internally in the queue in
the start_streaming_called variable. The state is set right after the
driver start_stream operation returns, and checked in the
vb2_buffer_done() function, typically called from the frame completion
interrupt handler. A race condition exists if the hardware finishes
processing the first frame before the start_stream operation returns.
Fix this by setting start_streaming_called to 1 before calling the
start_stream operation, and resetting it to 0 if the operation fails.
Cc: stable@vger.kernel.org # for v3.15 and up
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log