GitHub/exynos8895/android_kernel_samsung_universal8895.git
15 years agoASoC: S3C I2S LRCLK polarity option.
Jassi [Tue, 15 Sep 2009 10:02:38 +0000 (19:02 +0900)]
ASoC: S3C I2S LRCLK polarity option.

1) Explicitly set LRCLK polarity for I2S Vs LSM/MSB modes.
2) Convert from numerical to bit-field values for BCLK selection.
3) Use proper error checking for return value from clk_get

Signed-off-by: Jassi <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Provide API for reordering channels
Barry Song [Fri, 11 Sep 2009 17:16:29 +0000 (01:16 +0800)]
ASoC: Provide API for reordering channels

The patch adds an interface to set the relationship between audio
channel number and slot number. The interface should be really useful
because audio channel n doesn't always use slot n in all platforms. And
for some devices, the relationship even can change with sound mode
switch in 2.1,3.1,4.1,5.1,6.1,7.1 etc.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: AK4671: add ak4671 codec driver
Joonyoung Shim [Wed, 9 Sep 2009 15:12:43 +0000 (00:12 +0900)]
ASoC: AK4671: add ak4671 codec driver

The AK4671 is a stereo CODEC with a built-in Microphone-Amplifier,
Receiver-Amplifier and Headphone-Amplifier.

The datasheet for the ak4671 can find at the following url:
http://www.asahi-kasei.co.jp/akm/en/product/ak4671/ak4671_f01e.pdf

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Allow per-route connectedness checks for supplies
Mark Brown [Tue, 8 Sep 2009 17:59:05 +0000 (18:59 +0100)]
ASoC: Allow per-route connectedness checks for supplies

Some chips with complex internal supply (particularly clocking)
arragements may have multiple options for some of the supply
connections. Since these don't affect user-visible audio routing
the expectation would be that they would be managed automatically
by one of the drivers.

Support these users by allowing routes to have a connected function
which is queried before the connectedness of the path is checked as
normal. Currently this is only done for supplies, other widgets
could be supported but are not currently since the expectation for
them is that audio routing will be under the control of userspace.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Factor out I2C 8 bit address 8 bit data I/O
Joonyoung Shim [Mon, 7 Sep 2009 03:04:37 +0000 (12:04 +0900)]
ASoC: Factor out I2C 8 bit address 8 bit data I/O

This patch is for the AK4671 codec driver using this format.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add source argument to PLL configuration
Mark Brown [Sat, 5 Sep 2009 17:52:16 +0000 (18:52 +0100)]
ASoC: Add source argument to PLL configuration

More and more devices feature PLLs and FLLs with the ability to select
between multiple input clocks. In order to better support these devices
a new argument, source, has been added to the set_pll() configuration
API. Using set_clkdiv() is often difficult due to the need to stop the
PLL/FLL before any reconfiguration can be done.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: fix pxa2xx-ac97.c breakage
Robert Schwebel [Fri, 4 Sep 2009 19:16:36 +0000 (21:16 +0200)]
ASoC: fix pxa2xx-ac97.c breakage

Today's linux-next fails to build with

  sound/arm/pxa2xx-ac97.c: In function 'pxa2xx_ac97_probe':
  sound/arm/pxa2xx-ac97.c:211: error: 'pxa2xx_audio_ops_t' has no member named 'codec_data'
  make[2]: *** [sound/arm/pxa2xx-ac97.o] Error 1

It looks like commit e2365bf313fb21b49b1e4c911033389564428d03 has
introduced this; patch below.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Fully specify DC servo bits to update in wm_hubs
Mark Brown [Wed, 2 Sep 2009 17:51:19 +0000 (18:51 +0100)]
ASoC: Fully specify DC servo bits to update in wm_hubs

Avoids potential issues if we read back unexpected values during
a read/modify/write cycle.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Debugged improper setting of PLL fields in WM8580 driver
jassi brar [Tue, 1 Sep 2009 02:35:08 +0000 (11:35 +0900)]
ASoC: Debugged improper setting of PLL fields in WM8580 driver

Bug was caught while trying to use WM8580 as I2S master on SMDK.
Symptoms were lesser LRCLK read by CRO(41.02 instead of 44.1 KHz) Solved
by referring to WM8580A manual and setting mask value correctly and
making the code to not touch 'reserved' bits of PLL4 register.

Signed-off-by: Jassi <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: new board driver to connect bfin-5xx with ad1836 codec
Barry Song [Tue, 1 Sep 2009 04:45:14 +0000 (12:45 +0800)]
ASoC: new board driver to connect bfin-5xx with ad1836 codec

As discussed, the patch uses the original TDM order without rewriting.
For the match between TDM slot number and audio channel number, a new
API need be added.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
Jarkko Nikula [Fri, 28 Aug 2009 12:35:35 +0000 (15:35 +0300)]
ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI

The McBSP1 port in OMAP3 processors (I believe OMAP2 too but I don't have
specifications to check it) have additional CLKR and FSR pins for McBSP1
receiver. Reset default is that receiver is using bit clock and frame
sync signal from those pins but it is possible to configure to use
also CLKX and FSX pins as well. In fact, other McBSP ports are doing that
internally that transmitter and receiver share the CLKX and FSX.

Add functionaly that machine drivers can set the CLKR and FSR sources by
using the snd_soc_dai_set_sysclk.

Thanks to "Aggarwal, Anuj" <anuj.aggarwal@ti.com> for reporting the issue.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: davinci: i2c device creation moved into board files
Chaithrika U S [Tue, 25 Aug 2009 12:22:21 +0000 (15:22 +0300)]
ASoC: davinci: i2c device creation moved into board files

Also, the codec setup data structure has to remain for successful
probe.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Don't reconfigure WM8350 FLL if not needed
Mark Brown [Wed, 26 Aug 2009 13:14:51 +0000 (14:14 +0100)]
ASoC: Don't reconfigure WM8350 FLL if not needed

If the requested FLL configuration is the one we're currently running
in it's at best pointless to reconfigure the FLL.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Fix s3c-i2s-v2 build
Mark Brown [Wed, 26 Aug 2009 13:17:23 +0000 (14:17 +0100)]
ASoC: Fix s3c-i2s-v2 build

We now need the PCM header to kick the DMA.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Make platform data optional for TLV320AIC3x
Mark Brown [Wed, 26 Aug 2009 12:05:14 +0000 (13:05 +0100)]
ASoC: Make platform data optional for TLV320AIC3x

Now that we don't need the I2C address for the device the platform data
is redundant so allow it to be omitted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Chaithrika U S <chaithrika@ti.com>
15 years agoASoC: Add S3C24xx dependencies for Simtec machines
Mark Brown [Tue, 25 Aug 2009 14:53:41 +0000 (15:53 +0100)]
ASoC: Add S3C24xx dependencies for Simtec machines

No point in building them for S3C64xx, certainly no sense in running
into build issues there.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: SDP3430: Fix TWL GPIO6 pin mux request
Candelaria Villareal, Jorge [Tue, 25 Aug 2009 15:13:25 +0000 (10:13 -0500)]
ASoC: SDP3430: Fix TWL GPIO6 pin mux request

Fix the write to PMBR1 register through I2C. Also, the constant which
holds the value to write is now called TWL4030_GPIO6_PWM0_MUTE. This
name is based on TRM to avoid confusion.

Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
Shine Liu [Tue, 25 Aug 2009 12:05:50 +0000 (20:05 +0800)]
ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time

s3c24xx dma has the auto reload feature, when the the trnasfer is done,
CURR_TC(DSTAT[19:0], current value of transfer count) reaches 0, and DMA
ACK becomes 1, and then, TC(DCON[19:0]) will be loaded into CURR_TC. So
the transmission is repeated.

IRQ is issued while auto reload occurs. We change the DISRC and
DCON[19:0] in the ISR, but at this time, the auto reload has been
performed already. The first block is being re-transmitted by the DMA.

So we need rewrite the DISRC and DCON[19:0] for the next block
immediatly after the this block has been started to be transported.

The function s3c2410_dma_started() is for this perpose, which is called
in the form of "s3c2410_dma_ctrl(prtd->params->channel,
S3C2410_DMAOP_STARTED);" in s3c24xx_pcm_trigger().

But it is not correct. DMA transmission won't start until DMA REQ signal
arrived, it is the time s3c24xx_snd_txctrl(1) or s3c24xx_snd_rxctrl(1)
is called in s3c24xx_i2s_trigger().

In the current framework, s3c24xx_pcm_trigger() is always called before
s3c24xx_pcm_trigger(). So the s3c2410_dma_started() should be called in
s3c24xx_pcm_trigger() after s3c24xx_snd_txctrl(1) or
s3c24xx_snd_rxctrl(1) is called in this function.

However, s3c2410_dma_started() is dma related, to call this function we
should provide the channel number, which is given by
substream->runtime->private_data->params->channel. The private_data
points to a struct s3c24xx_runtime_data object, which is define in
s3c24xx_pcm.c, so s3c2410_dma_started() can't be called in s3c24xx_i2s.c

Fix this by moving the call to signal the DMA started to the DAI
drivers.

Signed-off-by: Shine Liu <liuxian@redflag-linux.com>
Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
Jarkko Nikula [Sun, 23 Aug 2009 09:24:27 +0000 (12:24 +0300)]
ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop

Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable
can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of
those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing
to start and stop individually the transmitter and receiver.

This cleans up the code in arch/arm/plat-omap/mcbsp.c and in
sound/soc/omap/omap-mcbsp.c which was the only user for those removed
functions.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
Jarkko Nikula [Sun, 23 Aug 2009 09:24:26 +0000 (12:24 +0300)]
ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI

Commit ca6e2ce08679c094878d7f39a0349a7db1d13675 is setting up few XCCR and
RCCR bits for I2S and DPS_A formats. Part of the bits are already set
for all formats and I believe that XDISABLE and RDISABLE bits are
format independent.

As XCCR and RCCR are found only from OMAP2430 and OMAP34xx, I move setup
of XDISABLE and RDISABLE to where those cpu's are tested and remove format
dependent part for simplicity.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Use textual values in DMA operating mode sysfs files
Jarkko Nikula [Mon, 24 Aug 2009 14:45:50 +0000 (17:45 +0300)]
OMAP: McBSP: Use textual values in DMA operating mode sysfs files

Use more descriptive than numerical value when showing and storing the
McBSP DMA operating mode. Show function is using similar syntax than e.g.
the led triggers so that all possible values for store function are
printed but with current value surrounded with square brackets.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
Janusz Krzysztofik [Sun, 23 Aug 2009 15:56:12 +0000 (17:56 +0200)]
ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT
flags of the DMA CCR register.

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoMerge branch 'topic/digital-mixing' into for-2.6.32
Mark Brown [Mon, 24 Aug 2009 19:44:41 +0000 (20:44 +0100)]
Merge branch 'topic/digital-mixing' into for-2.6.32

15 years agoASoC: Select core DMA when building for S3C64xx
Mark Brown [Mon, 24 Aug 2009 19:21:51 +0000 (20:21 +0100)]
ASoC: Select core DMA when building for S3C64xx

Ensure that the core DMA support is available when building for
S3C64xx.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Remove unneeded inclusion of linux/regulator/consumer.h
Takashi Iwai [Mon, 24 Aug 2009 07:41:32 +0000 (09:41 +0200)]
ASoC: Remove unneeded inclusion of linux/regulator/consumer.h

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoASoC: add missing inclusion of debugfs.h
Takashi Iwai [Mon, 24 Aug 2009 07:40:34 +0000 (09:40 +0200)]
ASoC: add missing inclusion of debugfs.h

To fix compile errors.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoASoC: Pass correct platform data from pxa2xx-ac97
Marek Vasut [Fri, 21 Aug 2009 18:02:52 +0000 (20:02 +0200)]
ASoC: Pass correct platform data from pxa2xx-ac97

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: free socdev if init_card() fails in wm9705_soc_probe()
Roel Kluin [Sat, 22 Aug 2009 19:24:24 +0000 (21:24 +0200)]
ASoC: free socdev if init_card() fails in wm9705_soc_probe()

Free socdev if snd_soc_init_card() fails.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add DAPM widget power decision debugfs files
Mark Brown [Fri, 21 Aug 2009 15:38:13 +0000 (16:38 +0100)]
ASoC: Add DAPM widget power decision debugfs files

Currently when built with DEBUG DAPM will dump information about
the power state decisions it is taking for each widget to dmesg.
This isn't an ideal way of getting the information - it requires
a kernel build to turn it on and off and for large hub CODECs the
volume of information is so large as to be illegible. When the
output goes to the console it can also cause a noticable impact
on performance simply to print it out.

Improve the situation by adding a dapm directory to our debugfs
tree containing a file per widget with the same information in
it. This still requires a decision to build with debugfs support
but is easier to navigate and much less intrusive.

In addition to the previously displayed information active streams
are also shown in these files.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add FSI-AK4642 sound support for SuperH
Kuninori Morimoto [Fri, 21 Aug 2009 00:42:59 +0000 (09:42 +0900)]
ASoC: Add FSI-AK4642 sound support for SuperH

This patch is tested by ms7724se

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add ak4642/ak4643 codec support
Kuninori Morimoto [Fri, 21 Aug 2009 01:23:41 +0000 (10:23 +0900)]
ASoC: Add ak4642/ak4643 codec support

This is very simple driver for ALSA
It supprt headphone output and stereo input only
This patch is tested by ms7724se

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: S3C24XX: Support for Simtec Hermes boards
Ben Dooks [Thu, 20 Aug 2009 21:50:43 +0000 (22:50 +0100)]
ASoC: S3C24XX: Support for Simtec Hermes boards

Add support for the tlv320aic3x CODEC on the Simtec Hermes board.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: tlv320aic3x: fixup board device changes
Ben Dooks [Thu, 20 Aug 2009 21:50:42 +0000 (22:50 +0100)]
ASoC: tlv320aic3x: fixup board device changes

Fixup the device changes by modifying the files that we just removed the
explicit device creation from with i2c_register_board_info() until this
can be moved into the relevant board files.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: tlv320aic3x: Change to use device model
Ben Dooks [Thu, 20 Aug 2009 21:50:41 +0000 (22:50 +0100)]
ASoC: tlv320aic3x: Change to use device model

The tlv320aic3x driver managed its own i2c device, instead of an extant
one created by the board support code. Change the code to make it so that
the driver binds to an extant (in this case i2c) device.

Add explict tlv320aic33 as well as tlv320aic3x to the supported device
table and remove the old driver bindings from the users of this code.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards
Ben Dooks [Thu, 20 Aug 2009 21:50:40 +0000 (22:50 +0100)]
ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards

Add core support for the range of S3C24XX Simtec boards with TLV320AIC23
CODECs on them. Since there are also boards with similar IIS routing the
AMP and the configuration code is placed in a core file for re-use with
other CODEC bindings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Use DMA operating mode of McBSP
Eduardo Valentin [Thu, 20 Aug 2009 13:18:26 +0000 (16:18 +0300)]
ASoC: OMAP: Use DMA operating mode of McBSP

Configures DMA sync mode depending on McBSP operating mode value.
The value is configurable by McBSP instance. So, depending
on McBSP operating mode, the DMA sync mode is passed from
omap-mcbsp to omap-pcm. Besides that, it also configures
McBSP threshold value depending on which McBSP mode is activated.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Use McBSP threshold to playback and capture
Eduardo Valentin [Thu, 20 Aug 2009 13:18:25 +0000 (16:18 +0300)]
ASoC: OMAP: Use McBSP threshold to playback and capture

This patch changes the way DMA is done in omap-pcm.c
in order to reduce power consumption. There is no need
to have so much SW control in order to have DMA in idle
state during audio streaming. Configuring McBSP threshold value
and DMA to FRAME_SYNC are sufficient.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Always syncronize audio transfers on frames
Eero Nurkkala [Thu, 20 Aug 2009 13:18:24 +0000 (16:18 +0300)]
ASoC: Always syncronize audio transfers on frames

All these steps are required for ASoC to behave correctly.
rccr and xccr are format dependent, for example TDM audio
has different values than I2S or DSP_A. Also the
omap_mcbsp_xmit_enable and/or omap_mcbsp_recv_enable must
be called right after the DMA has started.
This provides no longer L and R channels switching at random.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add runtime check for RFIG and XFIG
Eero Nurkkala [Thu, 20 Aug 2009 13:18:23 +0000 (16:18 +0300)]
ASoC: Add runtime check for RFIG and XFIG

This is, no RFIG or XFIG (Not defined in 34xx), correct
initiliazation of rccr and xccr.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Make DMA 64 aligned
Eduardo Valentin [Thu, 20 Aug 2009 13:18:22 +0000 (16:18 +0300)]
ASoC: OMAP: Make DMA 64 aligned

Align DMA address to DMA burst transaction sizes.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Enable DMA burst mode
Eduardo Valentin [Thu, 20 Aug 2009 13:18:21 +0000 (16:18 +0300)]
ASoC: OMAP: Enable DMA burst mode

Improve DMA transfers by enabling Burst transaction.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Let element DMA mode hit retention also
Eero Nurkkala [Thu, 20 Aug 2009 13:18:20 +0000 (16:18 +0300)]
OMAP: McBSP: Let element DMA mode hit retention also

The device no longer hits retention if element DMA
mode is taken for at least the duration of the
serial console timeout. Force element DMA mode to
shut down through smartidle.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Do not enable wakeups for no-idle mode
Eero Nurkkala [Thu, 20 Aug 2009 13:18:19 +0000 (16:18 +0300)]
OMAP: McBSP: Do not enable wakeups for no-idle mode

When no-idle mode is taken, wakeups need not to be enabled.
Moreover, CLOCKACTIVITY bits are unnecessary with this mode
also.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Configure NO IDLE mode for DMA mode different of threshold
Eduardo Valentin [Thu, 20 Aug 2009 13:18:18 +0000 (16:18 +0300)]
OMAP: McBSP: Configure NO IDLE mode for DMA mode different of threshold

Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Retain McBSP FCLK clockactivity
Eero Nurkkala [Thu, 20 Aug 2009 13:18:17 +0000 (16:18 +0300)]
OMAP: McBSP: Retain McBSP FCLK clockactivity

FCLK may get autogated so that it prevents the McBSP
to work properly. It is the bit 9 that must be set
for maintaining the McBSP FCLK.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Change wakeup signals
Eduardo Valentin [Thu, 20 Aug 2009 13:18:16 +0000 (16:18 +0300)]
OMAP: McBSP: Change wakeup signals

Configure only XRDYEN and RRDYEN wakeup signals
in order to get better power consumption.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Wakeups utilized
Eero Nurkkala [Thu, 20 Aug 2009 13:18:15 +0000 (16:18 +0300)]
OMAP: McBSP: Wakeups utilized

This patch enables the smart idle mode while
McBPS is being utilized. Once it's done,
force idle mode is taken instead. Apart of it,
it also configures what signals will wake mcbsp up.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Add link DMA mode selection
Peter Ujfalusi [Thu, 20 Aug 2009 13:18:14 +0000 (16:18 +0300)]
OMAP: McBSP: Add link DMA mode selection

It adds a new sysfs file, where the user can configure the mcbsp mode to use.
If the mcbsp channel is in use, it does not allow the change.
Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode,
store it, than use it to implement the different modes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Rename thres sysfs symbols
Eduardo Valentin [Thu, 20 Aug 2009 13:18:13 +0000 (16:18 +0300)]
OMAP: McBSP: Rename thres sysfs symbols

This patch renames the symbols that handles threshold
sysfs properties. This way we can add more sysfs properties
to them.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5
Peter Ujfalusi [Thu, 20 Aug 2009 13:18:12 +0000 (16:18 +0300)]
OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5

Do not allow applications to use the full buffer found on
McBSP1,3,4,5. Using the full buffer in threshold mode causes
the McBSP buffer to run dry, which can be observed as channels
are switching (in reality the channels are shifting).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Create and export max_(r|t)x_thres property
Eduardo Valentin [Thu, 20 Aug 2009 13:18:11 +0000 (16:18 +0300)]
OMAP: McBSP: Create and export max_(r|t)x_thres property

This patch export through sysfs two properties to configure
maximum threshold for transmission and reception on each
mcbsp instance. Also, it exports two helper functions to
allow mcbsp users to read this values.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Add transmit/receive threshold handler
Eduardo Valentin [Thu, 20 Aug 2009 13:18:10 +0000 (16:18 +0300)]
OMAP: McBSP: Add transmit/receive threshold handler

This patch adds a way to handle transmit/receive threshold.
It export to mcbsp users a callback registration procedure.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Use appropriate value for startup delay
Eduardo Valentin [Thu, 20 Aug 2009 13:18:09 +0000 (16:18 +0300)]
OMAP: McBSP: Use appropriate value for startup delay

Increasing startup delay value as worst case:
 CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec

Although, 100us may give enough time for two CLKSRG,
due to some unknown PM related, clock gating etc. reason,
this patch increases it to 500us.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.
Eduardo Valentin [Thu, 20 Aug 2009 13:18:08 +0000 (16:18 +0300)]
OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.

Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoOMAP: McBSP: Provide functions for ASoC frame syncronization
Eero Nurkkala [Thu, 20 Aug 2009 13:18:07 +0000 (16:18 +0300)]
OMAP: McBSP: Provide functions for ASoC frame syncronization

ASoC has an annoying bug letting either L or R channel to be
played on L channel. In other words, L and R channels can
switch at random. This provides McBSP funtionality that may
be used to fix this feature.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add SuperH FSI driver support for ALSA
Kuninori Morimoto [Thu, 20 Aug 2009 12:01:05 +0000 (21:01 +0900)]
ASoC: Add SuperH FSI driver support for ALSA

This driver is very simple.
It support playback only now.
This patch is tested by ms7724se board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: S3C24XX : Align the peroid size to the buffer size
Shine Liu [Thu, 20 Aug 2009 15:02:23 +0000 (23:02 +0800)]
ASoC: S3C24XX : Align the peroid size to the buffer size

> Then it's a driver bug.  If unaligned period size is allowed, it means
> that the irq is really generated in that period, not at the buffer
> boundary.  Otherwise, it must have a proper hw-constraint to align the
> period size to the buffer size.

This patch will fix the bug metioned in the above mail. Force the peroid
size to be aligned with the buffer size.

Based and tested on linux-2.6.31-rc6.

Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoALSA: Restore support for DMAless DAIs on PXA
Mark Brown [Wed, 19 Aug 2009 18:31:46 +0000 (19:31 +0100)]
ALSA: Restore support for DMAless DAIs on PXA

Used for applications such as direct bluetooth connections on
smartphones which don't go via the CPU. This used to be supported
before the refactoring to share code but this check was removed
during that move.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Provide default set_bias_level() implementation
Mark Brown [Wed, 19 Aug 2009 13:18:53 +0000 (14:18 +0100)]
ASoC: Provide default set_bias_level() implementation

If the CODEC does not provide a set_bias_level() then update the
bias_level variable for it since other parts of the system expect
that to be maintained.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: WM8993 digital mixing support
Mark Brown [Tue, 18 Aug 2009 15:01:57 +0000 (16:01 +0100)]
ASoC: WM8993 digital mixing support

The WM8993 provides digital sidetone paths and also allows each
channel on the audio interface to be routed separtately to the
DACs and ADCs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Add input and output AIF widgets
Mark Brown [Mon, 17 Aug 2009 16:39:22 +0000 (17:39 +0100)]
ASoC: Add input and output AIF widgets

Currently DAPM interfaces with the audio streams to and from the
processor at the DAC and ADC widgets. As the digital capabilities
of parts increases this is becoming a less and less able to meet
the needs of parts.

To meet the needs of these devices create new widgets interfacing
with the TDM bus but not integrated into any other functionality.
Audio can then be routed to and from these widgets using existing
routing widgets.

A slot number is provided in the definition but this is currently
not used yet. This is intended to support devices which can use
more than one TDM slot on a single interface.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Remove duplicate ADC/DAC widgets from wm_hubs.c
Mark Brown [Tue, 18 Aug 2009 14:24:05 +0000 (15:24 +0100)]
ASoC: Remove duplicate ADC/DAC widgets from wm_hubs.c

These need to be in the CODEC since the DAIs supported by the CODECs
aren't static.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Reenable S3C64xx I2S support
Mark Brown [Tue, 18 Aug 2009 15:02:59 +0000 (16:02 +0100)]
ASoC: Reenable S3C64xx I2S support

Joonyoung Shim reports that S3C64xx I2S is working on the NCP boards so
allow it to be selected in Kconfig.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmciro.com>
15 years agoASoC: Fix data format configuration for S3C64XX IISv2
Joonyoung Shim [Tue, 18 Aug 2009 12:56:19 +0000 (21:56 +0900)]
ASoC: Fix data format configuration for S3C64XX IISv2

The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD
register. This patch changes to the defined values it.

And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Implement TDM configuration for WM8993
Mark Brown [Mon, 17 Aug 2009 17:52:47 +0000 (18:52 +0100)]
ASoC: Implement TDM configuration for WM8993

Note that the number of slots used internally is specified in terms
of stereo slots while the external API works with mono slots.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Fix WM8993 MCLK configuration for high frequency MCLKs
Mark Brown [Mon, 17 Aug 2009 17:51:44 +0000 (18:51 +0100)]
ASoC: Fix WM8993 MCLK configuration for high frequency MCLKs

When used without the PLL we were accidentally clearing the MCLK/2
divider, resulting in a double rate SYSCLK when the divider should
have been used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Power speakers and headphones simultaneously
Mark Brown [Mon, 17 Aug 2009 15:26:59 +0000 (16:26 +0100)]
ASoC: Power speakers and headphones simultaneously

Speaker and headphone outputs do not need to be handled separately
since they can't be part of the same path.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Fix handling of bias levels for non-DAPM codecs
Mark Brown [Mon, 17 Aug 2009 10:55:38 +0000 (11:55 +0100)]
ASoC: Fix handling of bias levels for non-DAPM codecs

If the system doesn't have any DAPM widgets then we can't use their
state to check if the bias level for the codec should be up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: UDA134X: Fix mistaken mute/unmute code
Shine Liu [Mon, 17 Aug 2009 10:52:01 +0000 (18:52 +0800)]
ASoC: UDA134X: Fix mistaken mute/unmute code

There is a mistake in current uda134x_mute function: mute_reg has been
changed in line 162 or line 164, so uda134x_write should write
"mute_reg" but not "mute_reg & ~(1<<2)" to
UDA134X_DATA010.

Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Enhance OMAP1510 DMA progress software counter
Janusz Krzysztofik [Tue, 11 Aug 2009 19:44:29 +0000 (21:44 +0200)]
ASoC: OMAP: Enhance OMAP1510 DMA progress software counter

Enhance period_index accuracy, particularly just before buffer rewind, by
making use of DMA interrupt status flags in addition to simply counting up
interrupts.

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: OMAP: Make use of DMA channel self linking on OMAP1510
Janusz Krzysztofik [Mon, 10 Aug 2009 08:50:04 +0000 (10:50 +0200)]
ASoC: OMAP: Make use of DMA channel self linking on OMAP1510

Use newly implemented DMA channel self linking on OMAP1510 like on other OMAP
models. Remove unnecessary DMA transfer restart from interrupt handler
routine.

The interrupt routine used to maintain a period index, originally needed for
counting up periods up to a full buffer in order to restart the DMA transfer.
For some time, this counter is also used as a replacement for hardware DMA
progress counter that has been found unusable on OMAP1510 in case of playback.
Thus, the period index calculation cannot be omitted completely. However, the
accuracy of this counter can still suffer from missing DMA interrupts.

In order to work correctly, it requires patch 1 from this series also applied:
[RFC][PATCH 1/3] ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Factor out cache I/O from WM8974
Mark Brown [Sat, 15 Aug 2009 11:15:10 +0000 (12:15 +0100)]
ASoC: Factor out cache I/O from WM8974

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoMerge branch 'wm8974-upstream' into for-2.6.32
Mark Brown [Sat, 15 Aug 2009 10:52:43 +0000 (11:52 +0100)]
Merge branch 'wm8974-upstream' into for-2.6.32

15 years agoASoC: Hook i.MX into build
Mark Brown [Sat, 15 Aug 2009 10:37:30 +0000 (11:37 +0100)]
ASoC: Hook i.MX into build

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Staticise unexported variables
Mark Brown [Sat, 15 Aug 2009 10:36:49 +0000 (11:36 +0100)]
ASoC: Staticise unexported variables

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Remove unneeded i.MX dependency on SND
Mark Brown [Sat, 15 Aug 2009 10:36:20 +0000 (11:36 +0100)]
ASoC: Remove unneeded i.MX dependency on SND

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoMerge branch 'for-2.6.32' into mxc
Mark Brown [Sat, 15 Aug 2009 10:20:44 +0000 (11:20 +0100)]
Merge branch 'for-2.6.32' into mxc

Conflicts:
sound/soc/Makefile

15 years agoASoC: delete -spi suffix in ad1938 and free private data while registers fail
Barry Song [Fri, 14 Aug 2009 04:06:38 +0000 (12:06 +0800)]
ASoC: delete -spi suffix in ad1938 and free private data while registers fail

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: TWL4030: Fix for capture mixer strings
Peter Ujfalusi [Fri, 14 Aug 2009 05:44:00 +0000 (08:44 +0300)]
ASoC: TWL4030: Fix for capture mixer strings

Change the strings related to capture in order to be
interpreted correctly by alsamixer and possible other
UI based mixer applications.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoALSA: Allow passing platform_data for pxa2xx-ac97
Marek Vasut [Thu, 30 Jul 2009 00:55:01 +0000 (02:55 +0200)]
ALSA: Allow passing platform_data for pxa2xx-ac97

This patch adds support for passing platform data to ac97 bus devices
from PXA2xx-AC97 driver..

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM
Chaithrika U S [Tue, 11 Aug 2009 20:59:21 +0000 (16:59 -0400)]
ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM

There is one instance of McASP on DA850/OMAP-L138 SoC. This is
connected to TLV320AIC3106 codec for audio playback and capture.
This patch adds audio support on this platform. Some of the
structure prefix names which are common for DA830/OMAP-L137 EVM and
DA850/OMAP-L138 EVM have been renamed to da8xx from da830.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: DaVinci: Add a DAI format to McASP driver
Chaithrika U S [Tue, 11 Aug 2009 20:59:12 +0000 (16:59 -0400)]
ASoC: DaVinci: Add a DAI format to McASP driver

The patch adds a DAI format: Codec bit clock master and frame sync slave,
to the driver.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: DaVinci: McASP driver enhacements
Chaithrika U S [Tue, 11 Aug 2009 20:58:52 +0000 (16:58 -0400)]
ASoC: DaVinci: McASP driver enhacements

On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO
support. This FIFO provides additional data buffering. It also provides
tolerance to variation in host/DMA controller response times.
The read and write FIFO sizes are 256 bytes each. If FIFO is enabled,
the DMA events from McASP are sent to the FIFO which in turn sends DMA requests
to the host CPU according to the thresholds programmed.
More details of the FIFO operation can be found at
http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=
sprufm1&fileType=pdf

This patch adds support for FIFO configuration. The platform data has a
version field which differentiates the McASP on different SoCs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Factor out shared code from WM8993
Mark Brown [Wed, 29 Jul 2009 20:21:49 +0000 (21:21 +0100)]
ASoC: Factor out shared code from WM8993

The WM8993 analogue control is shared with other devices in the same
product line.  Since this is a very substantial proportion of the
driver move the definitions of these controls into a new wm_hubs module
which allows them to be shared between the two.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Minor cleanups to AD1938 driver
Mark Brown [Thu, 13 Aug 2009 14:19:42 +0000 (15:19 +0100)]
ASoC: Minor cleanups to AD1938 driver

- Build in SND_SOC_ALL_CODECS.
- Remove null suspend/resume stuff.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agonew ad1836 codec driver based on asoc
Barry Song [Thu, 13 Aug 2009 03:59:32 +0000 (11:59 +0800)]
new ad1836 codec driver based on asoc

There has been an ad1836 driver in sound/blackfin based on traditional alsa.
The new driver is based on asoc. The architecture of ad1836 codec driver is
very much like ad1938.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: TWL4030: Introduce PGAs for outputs
Peter Ujfalusi [Thu, 13 Aug 2009 12:59:34 +0000 (15:59 +0300)]
ASoC: TWL4030: Introduce PGAs for outputs

Dynamically control and control only the needed output amplifier
muting/un-muting.

The original code was muting and un-muting the following output
amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time
regardless which pin is actually in use at the given moment.

Move these as separate PGA so only the needed amplifier will be touched.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: add output/input widgets in ad1938 to make dac/adc dynamic PM work
Barry Song [Wed, 12 Aug 2009 03:34:25 +0000 (11:34 +0800)]
ASoC: add output/input widgets in ad1938 to make dac/adc dynamic PM work

According to the function dapm_dac_check_power() in
sound/soc/soc-dapm.c, dac power can't be on/off stand-alone without any
output widget as sink. And according to dapm_adc_check_power(), adc
power can't be on/off stand-alone without any input widget as source. So
we can't only define some stand-alone SND_SOC_DAPM_DAC/SND_SOC_DAPM_ADC
to hope their power can be managed dynamically.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Update AD1938 for new TDM slot API
Mark Brown [Wed, 12 Aug 2009 13:30:33 +0000 (14:30 +0100)]
ASoC: Update AD1938 for new TDM slot API

It's only actually paying attention to the slot count anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Update WM9081 for tdm_slot() API change
Mark Brown [Tue, 11 Aug 2009 15:28:39 +0000 (16:28 +0100)]
ASoC: Update WM9081 for tdm_slot() API change

Store the TDM slot width then if it's set use that rather than the
sample size to calculate BCLK. Leave imposing constraints to the
core (which should do this but doesn't yet) or machine driver.

Also allow 0 TDM slots to be configure (for use when disabling TDM).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoMerge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32
Mark Brown [Tue, 11 Aug 2009 12:09:27 +0000 (13:09 +0100)]
Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32

15 years agoASoC: fix I2C build errors
Randy Dunlap [Mon, 10 Aug 2009 23:04:39 +0000 (16:04 -0700)]
ASoC: fix I2C build errors

Fix soc build errors when I2C is built as a loadable module:

(.text+0x5d26b): undefined reference to `i2c_master_send'
soc-cache.c:(.text+0x5d32d): undefined reference to `i2c_transfer'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Drop unneeded declaration of removed wm8731 SPI write function
Mark Brown [Mon, 10 Aug 2009 11:59:29 +0000 (12:59 +0100)]
ASoC: Drop unneeded declaration of removed wm8731 SPI write function

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Define more formats for the AC97 CODECs
Mark Brown [Sun, 9 Aug 2009 19:08:31 +0000 (20:08 +0100)]
ASoC: Define more formats for the AC97 CODECs

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: Convert WM8776 to use factored out register cache code
Mark Brown [Sat, 8 Aug 2009 09:37:33 +0000 (10:37 +0100)]
ASoC: Convert WM8776 to use factored out register cache code

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: DaVinci: Support Audio on DA830 EVM
Chaithrika U S [Fri, 7 Aug 2009 14:07:51 +0000 (10:07 -0400)]
ASoC: DaVinci: Support Audio on DA830 EVM

Add support for audio on DA830 EVM- here McASP1 is interfaced to
TLV320AIC3106 codec.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoASoC: s3c2443-ac97: convert semaphore to mutex
Uwe Kleine-König [Fri, 7 Aug 2009 20:42:37 +0000 (22:42 +0200)]
ASoC: s3c2443-ac97: convert semaphore to mutex

This fixes a build failure for 2.6.31-rc4-rt1 (ARCH=arm, s3c2410_defconfig):

  CC [M]  sound/soc/s3c24xx/s3c2443-ac97.o
sound/soc/s3c24xx/s3c2443-ac97.c:50: warning: type defaults to 'int' in declaration of 'DECLARE_MUTEX'
sound/soc/s3c24xx/s3c2443-ac97.c:50: warning: parameter names (without types) in function declaration
sound/soc/s3c24xx/s3c2443-ac97.c: In function 's3c2443_ac97_read':
sound/soc/s3c24xx/s3c2443-ac97.c:59: error: 'ac97_mutex' undeclared (first use in this function)
sound/soc/s3c24xx/s3c2443-ac97.c:59: error: (Each undeclared identifier is reported only once
sound/soc/s3c24xx/s3c2443-ac97.c:59: error: for each function it appears in.)
sound/soc/s3c24xx/s3c2443-ac97.c: In function 's3c2443_ac97_write':
sound/soc/s3c24xx/s3c2443-ac97.c:93: error: 'ac97_mutex' undeclared (first use in this function)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoTTY/ASoC: Rename N_AMSDELTA line discipline to N_V253
Janusz Krzysztofik [Thu, 6 Aug 2009 11:07:32 +0000 (13:07 +0200)]
TTY/ASoC: Rename N_AMSDELTA line discipline to N_V253

The patch changes the line discipline name registered in include/linux/tty.h
and updates the ams-delta machine driver to use it.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
15 years agoMerge branch 'reg-cache' into for-2.6.32
Mark Brown [Fri, 7 Aug 2009 10:43:58 +0000 (11:43 +0100)]
Merge branch 'reg-cache' into for-2.6.32

15 years agoMerge branch 'for-2.6.31' into for-2.6.32
Mark Brown [Fri, 7 Aug 2009 10:42:01 +0000 (11:42 +0100)]
Merge branch 'for-2.6.31' into for-2.6.32