drm/i915: Stop setting SNB min-freq-table 0 on powersave setup

The min-freq-table is an array of values that match each CPU frequency to
an equivalent GPU frequency. Setting a single value of 0 on init is both
illegal (generates an error from the PCU) and nonsensical. Let's see if
we survive without that error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021205531.8651-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dp: add lane_count check in intel_dp_check_link_status

Currently it's entirely possible to go through the link training step
without first determining the lane_count, which is silly since we end up
doing a bunch of aux transfers of size = 0, as highlighted by
WARN_ON(!msg->buffer != !msg->size), and can only ever result in a
'failed to update link training' message. This can be observed during
intel_dp_long_pulse where we can do the link training step, but before
we have had a chance to set the link params. To avoid this we add an
extra check for the lane_count in intel_dp_check_link_status, which
should prevent us from doing the link training step prematurely.

v2: add WARN_ON_ONCE and FIXME comment (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=97344
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476912593-10019-1-git-send-email-matthew.auld@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Fix whitespace issues

Fix the poorly indented port parameters to the aux ctl and data
reg functions. This was fallout from the s/i915_mmio_reg_t/i915_reg_t/
that happened during the review of commit f0f59a00a1c9 ("drm/i915:
Type safe register read/write")

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>

drm/i915: Clean up DDI DDC/AUX CH sanitation

Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.

v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)

drm/i915: Respect alternate_ddc_pin for all DDI ports

The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.

I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.

v2: Include a commit message, include a debug message during init

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>

drm/i915: Respect alternate_aux_channel for all DDI ports

The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.

For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.

v2: Drop whitespace changes, keep MISSING_CASE() for unknown
    aux ch assignment, include a commit message, include debug
    message during init

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>

drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7

Dropping WA because it was for early steppings.

It is fixed in newer preproduction and all production revisions.

v2: add references, updated commit message

References: HSD#2126385, HSD#2131381, BSID#0764
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476977460-28088-1-git-send-email-arkadiusz.hiler@intel.com

drm/i915: KBL - Recommended buffer translation programming for DisplayPort

According to spec: "KBL re-uses SKL values, except where
specific KBL values are listed."

And recently spec has changed adding different table for Display Port only.
But for all SKUs (H,S,U,Y) we have slightly different values.

v2: Fix wrong condition spotted by Jani.
v3: Fix 7th entry of KBL H and S table - by Manasi.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup

No functional change.
Only moving this fixup block out of ddi_translation definitions
so we can split skl and kbl cleanly.

v2: Remove useless comment. (Ville)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475258757-29540-1-git-send-email-rodrigo.vivi@intel.com

Merge tag 'gvt-next-fix-2016-10-20' of https://github.com/01org/gvt-linux into drm-intel-next-queued

gvt-next-fix-2016-10-20

This contains fix for first pull request.
- clean up header mess between i915 core and gvt
- new MAINTAINERS item
- new kernel-doc section
- fix compiling warnings
- gvt gem fix series from Chris
- fix for i915 intel_engine_cs change
- some sparse fixes from Changbin

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Add a sunset clause to GPU hang logging

If the kernel is old, more than a few releases old, chances are that the
user is using an old kernel for a good reason, despite there being GPU
hangs. After 180days since driver release stop suggesting that they
should send those reports upstream.

[Since Daniel acked this I expect he will pick up the dim patch to
automatically update the DRIVER_TIMESTAMP everytime we tag a new
release.]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014134428.29582-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Stop reporting error details in dmesg as well as the error-state

As we already capture all the information from the registers into the
error-state, also dumping that to dmesg just generates noise that upsets
CI and users alike (and doesn't provide us with any more information).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019125203.28851-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/gvt: do not ignore return value of create_scratch_page

Function create_scratch_page() may fail in some cases.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix spare warnings on odd constant _Bool cast

The function return values should has type int if it return
a integer value.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: mark symbols static where possible

Mark all local functions & variables as static.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix sparse warnings on different address spaces

Add proper __iomem annotation for pointers obtained via ioremap().

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: properly access enabled intel_engine_cs

Switch to use new for_each_engine() helper to properly access
enabled intel_engine_cs as i915 core has changed that to be
dynamic managed. At GVT-g init time would still depend on ring
mask to determine engine list as it's earlier.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Remove defunct vmap_batch()

This code was removed from i915_cmd_parser.c but still an obsolete
version wound up being duplicated into gvt/cmd_parser.c. Good riddance.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Use common mapping routines for shadow_bb object

We have the ability to map an object, so use it rather than opencode it
badly. Note that the object remains permanently pinned, this is poor
practise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Use common mapping routines for indirect_ctx object

We have the ability to map an object, so use it rather than opencode it
badly.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Stop waiting whilst holding struct_mutex

For whatever reason, the gvt scheduler runs synchronously. At the very
least, lets run synchronously without holding the struct_mutex.

v2: cut'n'paste mutex_lock instead of unlock.
Replace long hold of struct_mutex with a mutex to serialise the worker
threads.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Stop checking for impossible interrupts from a kthread

The kthread will not be interrupted, don't even bother checking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Hold a reference on the request

The workload took a pointer to the request, and even waited upon,
without holding a reference on the request. Take that reference
explicitly and fix up the error path following request allocation that
missed flushing the request.

v2: [zhenyuw]
- drop request put in error path for dispatch, as main thread
caller will handle it identically to a real request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Remove dangerous unpin of backing storage of bound GPU object

Unpinning the pages prior to the object being release from the GPU may
allow the GPU to read and write into system pages (i.e. use after free
by the hw).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Use the returned VMA to provide the virtual address

The purpose of returning the just-pinned VMA is so that we can use the
information within, like its address. Also it should be tracked and used
as the cookie to unpin...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: i915_gem_object_create() returns an error pointer

On failure from i915_gem_object_create(), we need to check for an error
pointer not NULL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add runtime pm around fences

Manipulating the fence_list requires the runtime wakelock, as does
writing to the fence registers. Acquire a wakelock for the former, and
assert that the device is awake for the latter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Documentation/gpu: Add section for Intel GVT-g host support

Update with brief overview and reference for more detailed
arch design documents.

Add new section for Intel GVT-g host support.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Fix warning on obsolete function usage

Don't use obsolete drm_gem_object_unreference() but switch to i915_gem_object_put().

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

MAINTAINERS: Add new Intel GVT-g driver maintainer

This adds new item for Intel GVT-g driver maintainer info.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: clean up intel_gvt.h as interface for i915 core

i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.

Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.

v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc

v3: fix use after free and remove intel_gvt.initialized

v4: change to_gvt() to an inline

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gen9: Don't wrap strings in verify_wm_state()

Wrapping strings is against the guidelines in Documentation/CodingStyle,
chapter 2.

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-11-git-send-email-cpaul@redhat.com

drm/i915/gen9: Actually verify WM levels in verify_wm_state()

Thanks to Paulo Zanoni for indirectly pointing this out.

Looks like we never actually added any code for checking whether or not
we actually wrote watermark levels properly. Let's fix that.

Changes since v1:
- Use %u instead of %d when printing WM state mismatches

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-10-git-send-email-cpaul@redhat.com

drm/i915/gen9: Add skl_wm_level_equals()

Helper we're going to be using for implementing verification of the wm
levels in skl_verify_wm_level().

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-9-git-send-email-cpaul@redhat.com

drm/i915/gen9: Make skl_pipe_wm_get_hw_state() reusable

There's not much of a reason this should have the locations to read out
the hardware state hardcoded, so allow the caller to specify the
location and add this function to intel_drv.h. As well, we're going to
need this function to be reusable for the next patch.

Changes since v1:
- Fix accidental behavior change in the code that Paulo pointed out

Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-8-git-send-email-cpaul@redhat.com

drm/i915/gen9: Add ddb changes to atomic debug output

Finally, add some debugging output for ddb changes in the atomic debug
output. This makes it a lot easier to spot bugs from incorrect ddb
allocations.

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-7-git-send-email-cpaul@redhat.com

drm/i915/gen9: Get rid of redundant watermark values

Now that we've make skl_wm_levels make a little more sense, we can
remove all of the redundant wm information. Up until now we'd been
storing two copies of all of the skl watermarks: one being the
skl_pipe_wm structs, the other being the global wm struct in
drm_i915_private containing the raw register values. This is confusing
and problematic, since it means we're prone to accidentally letting the
two copies go out of sync. So, get rid of all of the functions
responsible for computing the register values and just use a single
helper, skl_write_wm_level(), to convert and write the new watermarks on
the fly.

Changes since v1:
- Fixup skl_write_wm_level()
- Fixup skl_wm_level_from_reg_val()
- Don't forget to copy *active to intel_crtc->wm.active.skl
Changes since v2:
- Fix usage of wrong cstate
Changes since v3 (by Paulo):
- Rebase

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v2)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476814189-6062-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: STOP_MACHINE is no more, stop selecting it

The STOP_MACHINE kconfig symbol was removed upstream after making
stop_machine() always work, commit 86fffe4a61dd ("kernel: remove
stop_machine() Kconfig dependency"), and was removed from i915's Kconfig
in commit 21fabbebff0e ("drm/i915: Remove select to deleted
STOP_MACHINE from Kconfig").

However, I accidentally reintroduced the select when rebasing an older
commit that also was dependent upon a working stop_machine.

Fixes: 9f267eb8d2ea ("drm/i915: Stop the machine whilst capturing...")
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019180635.27459-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm: Fix LSPCON kernel-doc

Fix warnings on building htmldocs.

v2: whitespace around '/' (Ville)

Fixes: 056996b95686 ("drm: Helper for lspcon in drm_dp_dual_mode")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476878884-2370-1-git-send-email-jani.nikula@intel.com

drm/i915: Catch premature unpinning of pages

Try to catch the violation of unpinning the backing storage whilst still
bound to the GPU.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019101147.17342-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: make lspcon_get_current_mode static

Fixes sparse warning:

drivers/gpu/drm/i915/intel_lspcon.c:30:22: warning: symbol
'lspcon_get_current_mode' was not declared. Should it be static?

Fixes: dbe9e61b8e43 ("drm/i915: Add lspcon support for I915 driver")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476789711-19697-2-git-send-email-jani.nikula@intel.com

drm: make is_lspcon_adaptor static

Fixes sparse warning:

drivers/gpu/drm/drm_dp_dual_mode_helper.c:151:6: warning: symbol
'is_lspcon_adaptor' was not declared. Should it be static?

Fixes: 056996b95686 ("drm: Helper for lspcon in drm_dp_dual_mode")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476789711-19697-1-git-send-email-jani.nikula@intel.com

drm/i915: Emit telltales for extra levels of debug upon initialisation

After printing our welcome message to the user, also include
supplementary details on what debugging is enabled (useful for us to
sanity check what extra safeguards are on for any random kernel).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014132707.29039-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com

drm/i915: Restrict pagefault disabling to just around copy_from_user()

When handling execbuf relocations, we play a delicate dance with
pagefault. We first try to access the user pages underneath our
struct_mutex. However, if those pages were inside a GEM object, we may
trigger a pagefault and deadlock as i915_gem_fault() tries to
recursively acquire struct_mutex. Instead, we choose to disable
pagefaulting around the copy_from_user whilst inside the struct_mutex
and handle the EFAULT by falling back to a copy outside the
struct_mutex.

We however presumed that disabling pagefaults would be expensive. It is
just an operation on the local current task. Cheap enough that we can
restrict the disable/enable to the critical section around the copy, and
so avoid having to handle the atomic sections within the relocation
handling itself.

v2: Just illustrate the broken error handling rather than argue why it
is safer to ignore it, for now.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-4-chris@chris-wilson.co.uk

drm/i915: Limit the scattergather coalescing to 32bits

The scattergather list uses a 32bit size counter, we should avoid
exceeding it.

v2: Also we should use unsigned int to match sg->length.

Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-3-chris@chris-wilson.co.uk

drm/i915: Document our internal limit on object size

In many places, we try to count pages using a 32 bit integer. That
implies if we are asked to create an object larger than 43bits, we will
subtly crash much later. Catch this on the boundary, and add a warning
to remind ourselves later on our exabyte systems.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-2-chris@chris-wilson.co.uk

drm/i915: Bump object bookkeeping to u64 from size_t

Internally we allow for using more objects than a single process can
allocate, i.e. we allow for a 64bit GPU address space even on a 32bit
system. Using size_t may oveerflow.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-1-chris@chris-wilson.co.uk

drm/i915/gen9: don't call ilk_pipe_pixel_rate() twice on the same function

We used to call skl_pipe_pixel_rate(), which used to be a single
one-line return, but now we're  calling ilk_pipe_pixel_rate() which is
not as simple, so it's better to just call it once and store the
computed value for reuse.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-2-git-send-email-paulo.r.zanoni@intel.com

drm/i915/gen9: fix watermarks when using the pipe scaler

Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.

v2: Invert the patch order so stable backports get easier.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915/gen9: look for adjusted_mode in the SAGV check for interlaced

We want to look at the mode that we're actually going to set. All the
other display checks for interlaced flags also look at adjusted_mode.

Cc: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476131459-23763-2-git-send-email-paulo.r.zanoni@intel.com

drm/i915/gen9: unconditionally apply the memory bandwidth WA

Mahesh Kumar is already working on a proper implementation for the
workaround, but while we still don't have it, let's just
unconditionally apply the workaround for everybody and we hope we can
close all those numerous bugzilla tickets. Also, I'm not sure how easy
it will be to backport the final implementation to the stable Kernels,
and this patch here is probably easier to backport.

At the present moment I still don't have confirmation that this patch
fixes any of the bugs listed below, but we should definitely try
testing all of them again.

v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude).
v3: Rebase (dev -> dev_priv change on ilk_wm_max_level).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830
Cc: stable@vger.kernel.org
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915/guc: Sanitory checks for platform that dont have GuC

i915.enable_guc_loading/submission=2 forces the usage of GuC.
For platforms that do not have a GuC, asking the kernel to use a GuC
should not result in an error state. Do extra checks to see if the
platform even has a GuC or not, regardless of the kernel parameter.

v2: Based on Rodrigo's patch and Paulo's suggestion(Paulo, Rodrigo)
v3: Correct the Indentation(Jani, Paulo)
v4: Added the blank line(Jani, Paulo)
v5 (from Paulo): Remove the extra blank line.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97573
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Zanoni Paulo <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476488825-5673-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Add lspcon resume function

As per the software design, we are driving lspcon in
PCON mode. But while resuming from suspend, lspcon can go
in LS mode (which is its default operating mode on power on)

This patch adds a resume function for lspcon, which makes sure
its operating in PCON mode, post resume.

V2: Address review comments from Imre
- move lspcon_resume call to encoder->reset()
- use early returns

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-6-git-send-email-shashank.sharma@intel.com

drm/i915: Enable lspcon initialization

This patch adds initialization code for lspcon.
What we are doing here is:
- Check if lspcon is configured in VBT for this port
- If lspcon is configured, initialize it and configure it
          as DP port.

V2: Addressed Ville's review comments:
- Not adding AVI IF functions for LSPCON display now.
  This part will be added once the dig_port level AVI-IF series
  gets merged.

V3: Rebase
V4: Rebase
V5: Rebase
V6: Rebase

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-5-git-send-email-shashank.sharma@intel.com

drm/i915: Parse VBT data for lspcon

Many GEN9 boards come with on-board lspcon cards.
Fot these boards, VBT configuration should properly point out
if a particular port contains lspcon device, so that driver can
initialize it properly.

This patch adds a utility function, which checks the VBT flag
for lspcon bit, and tells us if a port is configured to have a
lspcon device or not.

V2: Fixed review comments from Ville
- Do not forget PORT_D while checking lspcon for GEN9

V3: Addressed review comments from Rodrigo
- Create a HAS_LSPCON() macro for better use case handling.
- Do not dump warnings for non-gen-9 platforms, it will be noise.

V4: Rebase
V5: Rebase
V6: Pass dev_priv to HAS_LSPCON() macro

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-4-git-send-email-shashank.sharma@intel.com

drm/i915: Add lspcon support for I915 driver

This patch adds a new file, to accommodate lspcon support
for I915 driver. These functions probe, detect, initialize
and configure an on-board lspcon device during the driver
init time.

Also, this patch adds a small structure for lspcon device,
which will provide the runtime status of the device.

V2: addressed ville's review comments
- Clean the leftover macros from previous patch set

V3: Rebase
V4: addressed ville's review comments
- make internal functions static
- remove lspcon_detect_identifier, make it inline with lspcon_probe
- remove is_lspcon_active function
- remove force check while setting a lspcon mode

V5: Rebase
V6: Pass dev_priv to IS_GEN9 check

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-3-git-send-email-shashank.sharma@intel.com

drm: Helper for lspcon in drm_dp_dual_mode

This patch adds lspcon support in dp_dual_mode helper.
lspcon is essentially a dp->hdmi dongle with dual personality.

LS mode: It works as a passive dongle, by level shifting DP++
signals to HDMI signals, in LS mode.
PCON mode: It works as a protocol converter active dongle
in pcon mode, by converting DP++ outputs to HDMI 2.0 outputs.

This patch adds support for lspcon detection and mode set
switch operations, as a dp dual mode dongle.

v2: Addressed review comments from Ville
- add adaptor id for lspcon devices (0x08), use it to identify lspcon
- change function names
  old: drm_lspcon_get_current_mode/drm_lspcon_change_mode
  new: drm_lspcon_get_mode/drm_lspcon_set_mode
- change drm_lspcon_get_mode type to int, to match
  drm_dp_dual_mode_get_tmds_output
- change 'err' to 'ret' to match the rest of the functions
- remove pointless typecasting during call to dual_mode_read
- fix the but while setting value of data, while writing lspcon mode
- fix indentation
- change mdelay(10) -> msleep(10)
- return ETIMEDOUT instead of EFAULT, when lspcon mode change times out
- Add an empty line to separate std regs macros and lspcon regs macros
  Indent bit definition

v3: Addressed review comments from Rodrigo
- change macro name from DP_DUAL_MODE_TYPE_LSPCON to
  DP_DUAL_MODE_TYPE_HAS_DPCD for better readability
- change macro name from DP_DUAL_MODE_LSPCON_MODE_PCON to
  DP_DUAL_MODE_LSPCON_MODE_PCON for better readability
- add comment for MCA specific offsets like 0x40 and 0x41
- remove DP_DUAL_MODE_REV_TYPE2 check while checking lspcon adapter id

v4: Addressed review comments from Ville
- Fixed indentation at few places
- s/current_mode/mode
- s/reqd_mode/mode
- remove unnecessary void* cast
- remove drm_edid.h from includes
- Add a comment for _HAS_DPCD
- Fix enum description, for lspcon_mode.

v5: Rebase
v6: Rebase

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476720277-16298-1-git-send-email-shashank.sharma@intel.com

drm/i915/gvt: Fix build failure after intel_engine_cs change

Change GVT-g code reference for intel_engine_cs from static array to
allocated pointer after commit 3b3f1650b1ca ("drm/i915: Allocate
intel_engine_cs structure only for the enabled engines").

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018014007.29369-1-zhenyuw@linux.intel.com

drm/i915: Suppress underruns during DP link retraining

DP link retraining causes (spurious?) underruns. We can't really avoid
them, except perhaps by doing a full modeset (which has its own underrun
suppression anyway). So let's just hide them.

MST still has its own logic for retrainin, but a bigger hpd handling
cleanup/unification is needed there anyway, so let's leave that be for now.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98251
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476464574-32230-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Extract intel_crtc_pch_transcoder()

Extract the code to determine which PCH transcoder we're using to a
small helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476464574-32230-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: GMBUS don't need no forcewake

GMBUS is part of the display engine, and thus has no need for
forcewake. Let's not bother trying to grab it then.

I don't recall if the display engine suffers from system hangs
due to multiple accesses to the same "cacheline" in mmio space.
I hope not since we're no longer protected by the uncore lock
since commit 4e6c2d58ba86 ("drm/i915: Take forcewake once for
the entire GMBUS transaction")

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476272687-15070-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Merge tag 'gvt-next-2016-10-14' of https://github.com/01org/gvt-linux into drm-intel-next-queued

Zhenyu Wang writes:

This is first pull request to merge GVT-g device model in i915
which contains core GVT-g device model work to virtualize GPU
resources. This tries to add feature of Intel GVT-g technology
for full GPU virtualization. This version will support KVM based
virtualization solution named as KVMGT.

More background is on official project home: https://01.org/igvt-g

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915/gen9: Cleanup skl_pipe_wm_active_state

This function is a wreck, let's help it get its life back together and
cleanup all of the copy pasta here.

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/gen9: Make skl_wm_level per-plane

Having skl_wm_level contain all of the watermarks for each plane is
annoying since it prevents us from having any sort of object to
represent a single watermark level, something we take advantage of in
the next commit to cut down on all of the copy paste code in here.

Changes since v1:
- Style nitpicks
- Fix accidental usage of i vs. PLANE_CURSOR
- Split out skl_pipe_wm_active_state simplification into separate patch

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/skl: Remove linetime from skl_wm_values

Next part of cleaning up the watermark code for skl. This is easy, since
it seems that we never actually needed to keep track of the linetime in
the skl_wm_values struct anyway.

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/skl: Move per-pipe ddb allocations into crtc states

First part of cleaning up all of the skl watermark code. This moves the
structures for storing the ddb allocations of each pipe into
intel_crtc_state, along with moving the structures for storing the
current ddb allocations active on hardware into intel_crtc.

Changes since v1:
- Don't replace alloc->start = alloc->end = 0;

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Fix cxsr_latency_table reorg

I have re-ordered some struct members in patch:

  commit 44a655cae3043453f9dd8076538712d52e2e0ce4
  Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
  Date:   Thu Oct 13 11:09:23 2016 +0100

      drm/i915: Shrink cxsr_latency_table

but that particular one is not initialized with named
initializers which broke it.

Move the bitfields back at the beginning. Space saving
is still there.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 44a655cae304 ("drm/i915: Shrink cxsr_latency_table")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476453302-7580-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/gtt: Free unused lower-level page tables

Since "Dynamic page table allocations" were introduced, our page tables
can grow (being dynamically allocated) with address space range usage.
Unfortunately, their lifetime is bound to vm. This is not a huge problem
when we're not using softpin - drm_mm is creating an upper bound on used
range by causing addresses for our VMAs to eventually be reused.

With softpin, long lived contexts can drain the system out of memory
even with a single "small" object. For example:

bo = bo_alloc(size);
while(true)
    offset += size;
    exec(bo, offset);

Will cause us to create new allocations until all memory in the system
is used for tracking GPU pages (even though almost all PTEs in this vm
are pointing to scratch).

Let's free unused page tables in clear_range to prevent this - if no
entries are used, we can safely free it and return this information to
the caller (so that higher-level entry is pointing to scratch).

v2: Document return value and free semantics (Joonas)
v3: No newlines in vars block (Joonas)
v4: Drop redundant local 'reduce' variable
v5: Handle CI fail with enable_ppgtt=2

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com

drm/i915/gtt: Split gen8_ppgtt_clear_pte_range

Let's use more top-down approach, where each gen8_ppgtt_clear_* function
is responsible for clearing the struct passed as an argument and calling
relevant clear_range functions on lower-level tables.
Doing this rather than operating on PTE ranges makes the implementation
of shrinking page tables quite simple.

v2: Drop min when calculating num_entries, no negation in 48b ppgtt
check, no newlines in vars block (Joonas)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-2-git-send-email-michal.winiarski@intel.com

drm/i915: Remove unused "valid" parameter from pte_encode

We never used any invalid ptes, those were put in place for
a possibility of doing gpu faults. However our batchbuffers are not
restricted in length, so everything needs to be pointing to something
and thus out-of-bounds is pointing to scratch.

Remove the valid flag as it is always true.

v2: Expand commit msg, patch reorder (Mika)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-1-git-send-email-michal.winiarski@intel.com

drm/i915: Fix mismatched INIT power domain disabling during suspend

Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.

Fixes: 85e90679335f ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com

drm/i915: Make IS_GEN macros only take dev_priv

Saves 1416 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476352990-2504-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Make INTEL_GEN only take dev_priv

Saves 968 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_VALLEYVIEW only take dev_priv

Saves 944 bytes of .rodata strings and 128 bytes of .text.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_CHERRYVIEW only take dev_priv

Saves 864 bytes of .rodata strings and ~100 of .text.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_G4X only take dev_priv

Saves 472 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make HAS_L3_DPF only take dev_priv

Saves 472 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_BROXTON only take dev_priv

Saves 1392 bytes of .rodata strings.

Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Make IS_SKYLAKE only take dev_priv

Saves 1016 bytes of .rodata strings and couple hundred of .text.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_KABYLAKE only take dev_priv

Saves 1320 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_HASWELL only take dev_priv

Saves 2432 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_BROADWELL only take dev_priv

Saves 1808 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_IVYBRIDGE only take dev_priv

Saves 848 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make INTEL_DEVID only take dev_priv

Saves 4472 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make IS_GEN-range macro only take dev_priv

Saves 944 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Do not use INTEL_INFO(dev_priv)->ring_mask inside WARNs

Saves 1520 bytes of .rodata strings.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make HAS_RUNTIME_PM only take dev_priv

Saves 960 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make HAS_GMCH_DISPLAY only take dev_priv

More .rodata string saving by avoid __I915__ magic inside WARNs.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make INTEL_PCH_TYPE & co only take dev_priv

This saves 1872 bytes of .rodata strings.

v2:
 * Rebase.
 * Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make HAS_DDI and HAS_PCH_LPT_LP only take dev_priv

This saves 3248 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/gvt: Support GVT-g on Skylake

GVT-g supports Intel Skylake platform. Enable it.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU command scanner

This patch introduces a command scanner to scan guest command buffers.

Signed-off-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU context switch

As different VM may configure different render MMIOs when executing
workload, to schedule workloads between different VM, the render MMIOs
have to be switched.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU schedule policy framework

This patch introduces a vGPU schedule policy framework, with a timer based
schedule policy module for now

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU workload scheduler

This patch introduces the vGPU workload scheduler routines.

GVT workload scheduler is responsible for picking and executing GVT workload
from current scheduled vGPU. Before the workload is submitted to host i915,
the guest execlist context will be shadowed in the host GVT shadow context.
the instructions in guest ring buffer will be copied into GVT shadow ring
buffer. Then GVT-g workload scheduler will scan the instructions in guest
ring buffer and submit it to host i915.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU workload submission

This patch introduces the vGPU workload submission logics.

Under virtualization environment, guest will submit workload through
virtual execlist submit port. The submitted workload load will be wrapped
into an gvt workload which will be picked by GVT workload scheduler and
executed on host i915 later.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU execlist virtualization

This patch introduces the vGPU execlist virtualization.

Under virtulization environment, HW execlist interface are fully emulated
including virtual CSB emulation, virtual execlist emulation. The framework
will emulate the virtual CSB according to the guest workload running status

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU display virtualization

This patch introduces the GVT-g display virtualization.

It consists a collection of display MMIO handlers, like power well register
handler, pipe register handler, plane register handler, which will emulate
all display MMIOs behavior to support virtual mode setting sequence for
guest.

Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU MMIO virtualization

This patch introduces the generic vGPU MMIO emulation intercept
framework.  The MPT modules will request GVT-g core logic to
emulate MMIO read/write through IO emulation operations
callback when hypervisor trapped a guest GTTMMIO read/write.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU PCI configuration space virtualization

This patch introduces vGPU PCI configuration space virtualization.

- Adjust the trapped GPFN(Guest Page Frame Number) window of virtual GEN
PCI BAR 0 when guest initializes PCI BAR 0 address.

- Emulate OpRegion when guest touches OpRegion.

- Pass-through a part of aperture to guest when guest initializes
aperture BAR.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>