GitHub/exynos8895/android_kernel_samsung_universal8895.git
12 years agoInput: trackpoint - use psmouse_fmt() for messages
JJ Ding [Tue, 10 Apr 2012 07:25:01 +0000 (00:25 -0700)]
Input: trackpoint - use psmouse_fmt() for messages

Use psmouse_*() macros introduced in commit b5d21704361ee.

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: elantech - v4 is a clickpad, with only one button
JJ Ding [Tue, 10 Apr 2012 07:30:12 +0000 (00:30 -0700)]
Input: elantech - v4 is a clickpad, with only one button

Add pointer and buttonpad properties for v4 hardware.

Also, Jachiet reported that on Asus UX31, right button has no effect.
It turns out v4 has only one button, the right-button effect is
implemented with software when Windows driver is installed, or in
firmware when touchpad is in relative mode. So remove BTN_RIGHT
while at it.

Reported-by: Jachiet Louis <louis@jachiet.com>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: elantech - reset touchpad before configuring it
JJ Ding [Tue, 10 Apr 2012 07:29:12 +0000 (00:29 -0700)]
Input: elantech - reset touchpad before configuring it

Acer VH40 has a Fn key toggling the touchpad on and off, but it's
implemented in system firmware, and the EC chip has to receive
reset command to activate this function. Also when this machine
wakes up after resume, psmouse_reset is necessary to bring the
touchpad back on.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: sentelic - filter taps in absolute mode
Oskari Saarenmaa [Tue, 3 Apr 2012 16:46:32 +0000 (09:46 -0700)]
Input: sentelic - filter taps in absolute mode

Taps in absolute positioning single-finger mode are currently reported
as physical clicks by the driver. This should be handled by userspace,
not the kernel.

When a tap occurs, the FSP_PB0_LBTN bit is set, but the FSP_PB0_PHY_BTN
is not. We use this to filter out physical clicks from taps.

Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
Reviewed-by: Tai-hwa Liang <avatar@sentelic.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: tps6507x-ts - fix MODULE_ALIAS to match driver name
Uwe Kleine-König [Tue, 3 Apr 2012 16:33:58 +0000 (09:33 -0700)]
Input: tps6507x-ts - fix MODULE_ALIAS to match driver name

This is needed to make module auto loading work.

[dtor@mail.ru: remove file name from comment]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - check for allocation failure in probe()
Dan Carpenter [Fri, 30 Mar 2012 05:38:11 +0000 (22:38 -0700)]
Input: wacom - check for allocation failure in probe()

We accidentally removed the check for NULL in 3aac0ef10b "Input: wacom -
isolate input registration".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Tue, 27 Mar 2012 07:27:10 +0000 (00:27 -0700)]
Merge branch 'next' into for-linus

Conflicts:
drivers/input/tablet/wacom_sys.c

12 years agoInput: tegra-kbc - allocate pdata before using it
Viresh Kumar [Tue, 27 Mar 2012 06:55:24 +0000 (23:55 -0700)]
Input: tegra-kbc - allocate pdata before using it

Following commit broke DT support for tegra-kbc by removing pdata
allocation completely:

   commit 023cea0ecfa2df034096c3f4afa796a0b2d1188a
   Author: Shridhar Rasal <srasal@nvidia.com>
   Date:   Fri Feb 3 00:27:30 2012 -0800

       Input: tegra-kbc - allow skipping setting up some of GPIO pins

This patch restores it.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: amijoy - add missing platform check
Geert Uytterhoeven [Mon, 26 Mar 2012 06:29:30 +0000 (23:29 -0700)]
Input: amijoy - add missing platform check

On multi-platform kernels, the Amiga joystick driver may be initialized
when running on Amiga only. Else it may crash later.
Fortunately this driver is almost always compiled as a module (to avoid
conflicts with the mouse driver), so it needs an explicit insmod to
trigger a crash.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - wireless battery status
Chris Bagwell [Mon, 26 Mar 2012 06:26:30 +0000 (23:26 -0700)]
Input: wacom - wireless battery status

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - create inputs when wireless connect
Chris Bagwell [Mon, 26 Mar 2012 06:26:20 +0000 (23:26 -0700)]
Input: wacom - create inputs when wireless connect

When a tablet connect or disconnect is detected, schedule
work queue to register or unregister related input devices.

When a wireless tablet connects, it reports same USB PID
used if tablet is connected with USB cable. Use this to
update features values, set input capabilities, and then
register device.  From there, the Pen and Touch interfaces
will reuse the existing tablet's IRQ routines.

Its possible that 1 receiver is shared with 2 tablets with
different PID (small and medium Bamboo for example) so the
input is unregister at disconnect to better support this case.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - wireless monitor framework
Chris Bagwell [Mon, 26 Mar 2012 06:26:11 +0000 (23:26 -0700)]
Input: wacom - wireless monitor framework

The 3rd gen Bamboo Pen & Touch and Intuos5 tablets support an
optional wireless module. When its receiver is plugged into USB,
it presents 3 interfaces: 0) Monitor 1) Pen and 2) Touch.

The exact capabilities of the Pen and Touch interfaces can
not be determined until a tablet connection is established
and reported over the Monitor interface.

This patch detects this wireless receiver and enables interrupt
packets to be processed for the Monitor interface. Processing
the data in packets will be left to another patch.

Since it doesn't make sense to create an input device for the
Monitor interface, it is not created. Creation of Pen and Touch
input device is also delayed until monitor packets can be processed.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - isolate input registration
Chris Bagwell [Mon, 26 Mar 2012 06:25:45 +0000 (23:25 -0700)]
Input: wacom - isolate input registration

Although this better co-locates input registration logic,
the main goal is to make it easier to optionally create
input devices or delay creation to later time periods.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: sentelic - improve packet debugging information
Oskari Saarenmaa [Mon, 26 Mar 2012 00:17:27 +0000 (17:17 -0700)]
Input: sentelic - improve packet debugging information

Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: sentelic - minor code cleanup
Tai-hwa Liang [Mon, 26 Mar 2012 00:17:00 +0000 (17:17 -0700)]
Input: sentelic - minor code cleanup

Improve code readability by converting yet another magic number into a
pre-defined constant.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: sentelic - enabling absolute coordinates output for newer hardware
Tai-hwa Liang [Mon, 26 Mar 2012 00:16:36 +0000 (17:16 -0700)]
Input: sentelic - enabling absolute coordinates output for newer hardware

- Hooking multi-finger coordinates output with kernel multitouch library;
- Enabling absolute coordinates output for Cx+ hardware. The older hardware
  performs much better in relative mode; thus relative mode related code
  are preserved.

Part of the code is based on the work done by Oskari Saarenmaa <os@ohmu.fi>,
which was used to support the clickpad found on ASUS UX21/31 Ultrabook.
On the other hand, the FSP found on UX21/31 doesn't have hardware capability
register other than PnP ID, which means that we'll have to figure out an
alternative approach to identify such pad correctly; otherwise, blindly
adding INPUT_PROP_BUTTONPAD property may compatability issues amongst
existing FSPs.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: sentelic - refactor code for upcoming new hardware support
Tai-hwa Liang [Mon, 26 Mar 2012 00:15:03 +0000 (17:15 -0700)]
Input: sentelic - refactor code for upcoming new hardware support

- Move event bits setup code into a separate function,
  fsp_set_input_params(), so that we can perform hardware-specific settings
  in the future;
- Take hardware version information into account when activating
  protocol;
- Remove button information from boot message as it's somewhat confusing
  and is only for internal processing. While there, also move button
  retrieval code to be a part of protocol activation process.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: gpio_keys - add support for interrupt only keys
Laxman Dewangan [Tue, 20 Mar 2012 00:54:31 +0000 (17:54 -0700)]
Input: gpio_keys - add support for interrupt only keys

Some of buttons, like power-on key or onkey, may only generate interrupts
when pressed and not actually be mapped as gpio in the system. Allow
setting gpio to invalid value and specify IRQ instead to support such
keys. The debounce timer is used not to debounce but to ignore new IRQs
coming while button is kept pressed.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: gpio_keys - consolidate key destructor code
Dmitry Torokhov [Mon, 19 Mar 2012 06:36:30 +0000 (23:36 -0700)]
Input: gpio_keys - consolidate key destructor code

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: revert "gpio_keys - switch to using threaded IRQs"
David Jander [Mon, 19 Mar 2012 06:36:29 +0000 (23:36 -0700)]
Input: revert "gpio_keys - switch to using threaded IRQs"

request_any_context_irq() should handle the case when using GPIO expanders
that themselves use threaded IRQs, and so the premise of change
7e2ecdf438bb479e2b4667fc16b1a84d6348da04 is incorrect.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: gpio_keys - constify platform data
Dmitry Torokhov [Mon, 19 Mar 2012 06:36:29 +0000 (23:36 -0700)]
Input: gpio_keys - constify platform data

The platform data should not be altered and therefore should be
accessed through const pointers.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: spear-keyboard - remove kbd_set_plat_data()
Viresh Kumar [Tue, 20 Mar 2012 00:46:58 +0000 (17:46 -0700)]
Input: spear-keyboard - remove kbd_set_plat_data()

We must use platform_device_add_data() instead of kbd_set_plat_data() so
let's remove it.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Tue, 20 Mar 2012 00:02:01 +0000 (17:02 -0700)]
Merge branch 'next' into for-linus

12 years agoInput: ili210x - add support for Ilitek ILI210x based touchscreens
Olivier Sobrie [Sat, 17 Mar 2012 06:57:09 +0000 (23:57 -0700)]
Input: ili210x - add support for Ilitek ILI210x based touchscreens

The driver supports chipsets ILI2102, ILI2102s, ILI2103, ILI2103s and
ILI2105. Such kind of controllers can be found in Amazon Kindle Fire
devices.

Reviewed-by: Jan Paesmans <jan.paesmans@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: altera_ps2 - use of_match_ptr()
Tobias Klauser [Sat, 17 Mar 2012 06:31:25 +0000 (23:31 -0700)]
Input: altera_ps2 - use of_match_ptr()

Instead of having to define the match table to NULL if CONFIG_OF isn't
set, use the of_match_ptr() macro which will do this for us.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: synaptics_usb - switch to module_usb_driver()
Dmitry Torokhov [Sat, 17 Mar 2012 06:05:44 +0000 (23:05 -0700)]
Input: synaptics_usb - switch to module_usb_driver()

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: convert I2C drivers to use module_i2c_driver()
Axel Lin [Sat, 17 Mar 2012 06:05:41 +0000 (23:05 -0700)]
Input: convert I2C drivers to use module_i2c_driver()

This patch converts the drivers in drivers/input/* to use the
module_i2c_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: convert SPI drivers to use module_spi_driver()
Axel Lin [Sat, 17 Mar 2012 06:05:26 +0000 (23:05 -0700)]
Input: convert SPI drivers to use module_spi_driver()

This patch converts the drivers in drivers/input/* to use the
module_spi_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: omap4-keypad - move platform_data to <linux/platform_data>
Felipe Balbi [Sat, 17 Mar 2012 05:47:48 +0000 (22:47 -0700)]
Input: omap4-keypad - move platform_data to <linux/platform_data>

This patch allows us to drop the OMAP dependency from the OMAP4 keypad
driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: kxtj9 - who_am_i check value and initial data rate fixes
Christopher Hudson [Sat, 17 Mar 2012 05:47:47 +0000 (22:47 -0700)]
Input: kxtj9 - who_am_i check value and initial data rate fixes

Several fixes based on customer feedback:

* WHO_AM_I value has changed since preliminary parts used for initial
  testing;

* Output of le16_to_cpu must be saved to memory before shifting to
  preserve sign;

* Initial data rate was not extracted from data control register init.
  This was causing the initial data rate to be set to maximum until
  it was changed. To fix this problem, it made more sense to specify
  initial data rate and extract the register mask from that.

Signed-off-by: Chris Hudson <chudson@kionix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: add driver support for MAX8997-haptic
Donggeun Kim [Fri, 16 Mar 2012 19:28:22 +0000 (12:28 -0700)]
Input: add driver support for MAX8997-haptic

The MAX8997-haptic function can be used to control motor. User can
control the haptic driver by using force feedback framework.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: tegra-kbc - revise device tree support
Olof Johansson [Wed, 14 Mar 2012 04:36:29 +0000 (21:36 -0700)]
Input: tegra-kbc - revise device tree support

This is an incremental patch updating to the revised bindings for
matrix keyboards.

This includes an optional "linux,fn-keymap" binding that is not yet
implemented, that will be used to specify the Fn-key modifier layout
if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: of_keymap - add device tree bindings for simple key matrices
Olof Johansson [Wed, 14 Mar 2012 04:35:51 +0000 (21:35 -0700)]
Input: of_keymap - add device tree bindings for simple key matrices

This adds a simple device tree binding for simple key matrix data and
a helper to fill in the platform data.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: wacom - fix physical size calculation for 3rd-gen Bamboo
Jason Gerecke [Tue, 13 Mar 2012 05:15:43 +0000 (22:15 -0700)]
Input: wacom - fix physical size calculation for 3rd-gen Bamboo

This calculation determines the physical dimensions of the tablet,
used later on in calculate_touch_res to obtain the touch sensor
resolution.

Instead of dividing the logical size by the resolution, the current
code performs a multiplication. This doesn't pose a problem for the
3rd-gen Bamboo since the resolution and scale factor happen to be
identical, but will produce an incorrect result for other cases.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: twl4030-vibra - really switch from #if to #ifdef
Dmitry Torokhov [Sun, 11 Mar 2012 23:02:06 +0000 (16:02 -0700)]
Input: twl4030-vibra - really switch from #if to #ifdef

The commit f3761c0779b62276b5bf84532a81d5dc49bd721f claimed to change
#if to #ifdef to avoid compiler warnings when CONFIG_PM_SLEEP is not
defined, but failed at that.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
Julia Lawall [Sun, 11 Mar 2012 23:06:03 +0000 (16:06 -0700)]
Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible

Change 0 to NULL in the last argument of request_irq, since the argument
should have pointer type and so that the last argument of request_irq
syntactically matches the second argument of the later call to free_irq.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoMerge branch 'for-next' of github.com:rydberg/linux into next
Dmitry Torokhov [Fri, 9 Mar 2012 18:56:35 +0000 (10:56 -0800)]
Merge branch 'for-next' of github.com:rydberg/linux into next

12 years agoMerge commit 'v3.3-rc6' into next
Dmitry Torokhov [Fri, 9 Mar 2012 18:55:17 +0000 (10:55 -0800)]
Merge commit 'v3.3-rc6' into next

12 years agoInput: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use
Jason Gerecke [Tue, 6 Mar 2012 18:19:19 +0000 (10:19 -0800)]
Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use

The message count field uses three bits of storage, not two.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: max8925_onkey - avoid accessing input device too early
Dmitry Torokhov [Tue, 6 Mar 2012 17:10:21 +0000 (09:10 -0800)]
Input: max8925_onkey - avoid accessing input device too early

Input device must be allocated (but not necessarily registered) before
requesting IRQs, otherwise there is a chance that IRQ handler fires and
tries to reference not yet allocated input device.

Also it makes sense to store relative IRQ numbers in max8925_onkey_info
structure as they are needed in suspend/resume which we expect to be
called more often than probe and remove.

Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: max8925_onkey - allow to be used as a wakeup source
Kevin Liu [Tue, 6 Mar 2012 06:24:54 +0000 (22:24 -0800)]
Input: max8925_onkey - allow to be used as a wakeup source

Implement suspend and resume methods to set up devices as wakeup source.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: atmel-wm97xx - convert to dev_pm_ops
Dmitry Torokhov [Sun, 4 Mar 2012 17:26:14 +0000 (09:26 -0800)]
Input: atmel-wm97xx - convert to dev_pm_ops

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: atmel-wm97xx - set driver owner
Dmitry Torokhov [Sun, 4 Mar 2012 17:26:13 +0000 (09:26 -0800)]
Input: atmel-wm97xx - set driver owner

This allows creating proper sysfs link between driver and its module.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: add cyttsp touchscreen maintainer entry
Javier Martinez Canillas [Sun, 4 Mar 2012 17:26:14 +0000 (09:26 -0800)]
Input: add cyttsp touchscreen maintainer entry

Since Cypress TTSP driver was merged in mainline, add a maintainer
entry for it.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: cyttsp - remove useless checks in cyttsp_probe()
Dmitry Torokhov [Sun, 4 Mar 2012 17:26:15 +0000 (09:26 -0800)]
Input: cyttsp - remove useless checks in cyttsp_probe()

This fixes reference-before-check problem; there is no reason to check
if caller passed NULL dev or bus_ops as it is done only by bus-specific
drivers which already do the right thing.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
Armando Visconti [Sun, 4 Mar 2012 18:41:36 +0000 (10:41 -0800)]
Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037

The Data Modul TP 72037 EasyTouch controller is derived from EGALAX
controller and is capable of detecting dual contacts. Packets can be 5
bytes or 10 bytes long, depending whether one or two contacts are
detected. Format is same as EGALAX touch controller, but with x and y
coordinates inverted.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: add support for OnKey module for DA9052/53 PMIC
Ashish Jangam [Sun, 4 Mar 2012 16:40:58 +0000 (08:40 -0800)]
Input: add support for OnKey module for DA9052/53 PMIC

On-key Driver for Dialog Semiconductor DA9052/53 PMICs.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoInput: add support for TI Touchscreen controller
Rachna Patil [Sun, 4 Mar 2012 16:11:57 +0000 (08:11 -0800)]
Input: add support for TI Touchscreen controller

This patch adds support for TI's touchscreen
controller for a 4/5/8 wire resistive panel
that is directly fed to the ADC.

This touchscreen controller will be part of
AM335x TI SoC. The TRM can be found at:
http://www.ti.com/lit/ug/spruh73a/spruh73a.pdf

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
12 years agoLinux 3.3-rc6
Linus Torvalds [Sun, 4 Mar 2012 01:08:09 +0000 (17:08 -0800)]
Linux 3.3-rc6

12 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi...
Linus Torvalds [Sun, 4 Mar 2012 00:42:30 +0000 (16:42 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

SCSI fixes from James Bottomley:
 "There's just a single fix in here: the osd max device number fix."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576

12 years agoMerge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Sun, 4 Mar 2012 00:33:51 +0000 (16:33 -0800)]
Merge tag 'parisc-fixes' of git://git./linux/kernel/git/jejb/parisc-2.6

PARISC fixes from James Bottomley:
 "This is a set of build fixes to get the cross compiled architecture
  testbeds building again"

* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.
  [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h
  [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional

12 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 3 Mar 2012 17:32:31 +0000 (09:32 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 3 Mar 2012 17:31:49 +0000 (09:31 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull from Herbert Xu:
  "This push fixes a bug in mv_cesa that causes all hash operations
   that supply data on a final operation to fail."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: mv_cesa - fix final callback not ignoring input data

12 years agovfs: export full_name_hash() function to modules
Linus Torvalds [Sat, 3 Mar 2012 03:40:57 +0000 (19:40 -0800)]
vfs: export full_name_hash() function to modules

Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular
build, because it needs exporting now that it isn't inlined any more.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 2 Mar 2012 23:21:48 +0000 (15:21 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

hhwmon fixes for 3.3-rc6 from Guenter Roeck:

These patches are necessary for correct operation and management of
F75387.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (f75375s) Catch some attempts to write to r/o registers
  hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
  hwmon: (f75375s) Make pwm*_mode writable for the F75387
  hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387

12 years agoMerge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Fri, 2 Mar 2012 23:21:15 +0000 (15:21 -0800)]
Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3 from Florian Tobias Schandinat

It includes:
 - two fixes for OMAP HDMI
 - one fix to make new OMAP functions behave as they are supposed to
 - one Kconfig dependency fix
 - two fixes for viafb for modesetting on VX900 hardware

* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
  OMAPDSS: APPLY: make ovl_enable/disable synchronous
  OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  viafb: fix IGA1 modesetting on VX900
  viafb: select HW scaling on VX900 for IGA2
  OMAPDSS: HDMI: hot plug detect fix
  OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled

12 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 2 Mar 2012 23:20:41 +0000 (15:20 -0800)]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound

sound fixes for 3.3-rc6 from Takashi Iwai

This contains again regression fixes for various HD-audio and ASoC
regarding SSI and dapm shutdown path.  In addition, a minor azt3328
fix and the correction of the new jack-notification strings in HD-audio.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Kill hyphenated names
  ALSA: hda - Add a fake mute feature
  ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs
  ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3
  ALSA: hda/realtek - Fix resume of multiple input sources
  ASoC: i.MX SSI: Fix DSP_A format.
  ASoC: dapm: Check for bias level when powering down

12 years agovfs: split up name hashing in link_path_walk() into helper function
Linus Torvalds [Fri, 2 Mar 2012 22:49:24 +0000 (14:49 -0800)]
vfs: split up name hashing in link_path_walk() into helper function

The code in link_path_walk() that finds out the length and the hash of
the next path component is some of the hottest code in the kernel.  And
I have a version of it that does things at the full width of the CPU
wordsize at a time, but that means that we *really* want to split it up
into a separate helper function.

So this re-organizes the code a bit and splits the hashing part into a
helper function called "hash_name()".  It returns the length of the
pathname component, while at the same time computing and writing the
hash to the appropriate location.

The code generation is slightly changed by this patch, but generally for
the better - and the added abstraction actually makes the code easier to
read too.  And the new interface is well suited for replacing just the
"hash_name()" function with alternative implementations.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: clarify and clean up dentry_cmp()
Linus Torvalds [Fri, 2 Mar 2012 22:47:15 +0000 (14:47 -0800)]
vfs: clarify and clean up dentry_cmp()

It did some odd things for unclear reasons.  As this is one of the
functions that gets changed when doing word-at-a-time compares, this is
yet another of the "don't change any semantics, but clean things up so
that subsequent patches don't get obscured by the cleanups".

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: uninline full_name_hash()
Linus Torvalds [Fri, 2 Mar 2012 22:32:59 +0000 (14:32 -0800)]
vfs: uninline full_name_hash()

.. and also use it in lookup_one_len() rather than open-coding it.

There aren't any performance-critical users, so inlining it is silly.
But it wouldn't matter if it wasn't for the fact that the word-at-a-time
dentry name patches want to conditionally replace the function, and
uninlining it sets the stage for that.

So again, this is a preparatory patch that doesn't change any semantics,
and only prepares for a much cleaner and testable word-at-a-time dentry
name accessor patch.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: trivial __d_lookup_rcu() cleanups
Linus Torvalds [Fri, 2 Mar 2012 22:23:30 +0000 (14:23 -0800)]
vfs: trivial __d_lookup_rcu() cleanups

These don't change any semantics, but they clean up the code a bit and
mark some arguments appropriately 'const'.

They came up as I was doing the word-at-a-time dcache name accessor
code, and cleaning this up now allows me to send out a smaller relevant
interesting patch for the experimental stuff.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agohwmon: (f75375s) Catch some attempts to write to r/o registers
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:54 +0000 (16:15 -0500)]
hwmon: (f75375s) Catch some attempts to write to r/o registers

It makes no sense to attempt to manually configure the fan in auto mode,
or set the duty cycle directly in closed loop mode.  The corresponding
registers are then read-only.  If the user tries it nonetheless, error out
with EINVAL instead of silently doing nothing.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Minor formatting cleanup]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agohwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:53 +0000 (16:15 -0500)]
hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable

The F75387 supports automatic fan control using either PWM duty cycle or
RPM speed values.  Make the driver detect the latter mode, and expose the
different modes in sysfs as per pwm_enable, so that the user can switch
between them.

The interpretation of the pwm_enable attribute for the F75387 is adjusted
to be a superset of those values used for similar Fintek chips which do
not support automatic duty mode, with 2 mapping to automatic speed mode,
and moving automatic duty mode to the new value 4.

Toggling the duty mode via pwm_enable is currently denied for the F75387,
as the chip then simply reinterprets the fan configuration register values
according to the new mode, switching between RPM and PWM units, which
makes this a dangerous operation.

This patch introduces a new pwm mode into the driver. This is necessary
because the new mode (automatic pwm mode, 4) may already be enabled by the
BIOS, and the driver should not break existing functionality. This was seen
on at least one board.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agoMerge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent...
Linus Torvalds [Fri, 2 Mar 2012 19:38:43 +0000 (11:38 -0800)]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pulling latest branches from Ingo:

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  memblock: Fix size aligning of memblock_alloc_base_nid()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Ensure offset provided is not greater than function length without DWARF info too
  perf tools: Ensure comm string is properly terminated
  perf probe: Ensure offset provided is not greater than function length
  perf evlist: Return first evsel for non-sample event on old kernel
  perf/hwbp: Fix a possible memory leak

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume

12 years agoregset: Return -EFAULT, not -EIO, on host-side memory fault
H. Peter Anvin [Fri, 2 Mar 2012 18:43:49 +0000 (10:43 -0800)]
regset: Return -EFAULT, not -EIO, on host-side memory fault

There is only one error code to return for a bad user-space buffer
pointer passed to a system call in the same address space as the
system call is executed, and that is EFAULT.  Furthermore, the
low-level access routines, which catch most of the faults, return
EFAULT already.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@hack.frob.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoregset: Prevent null pointer reference on readonly regsets
H. Peter Anvin [Fri, 2 Mar 2012 18:43:48 +0000 (10:43 -0800)]
regset: Prevent null pointer reference on readonly regsets

The regset common infrastructure assumed that regsets would always
have .get and .set methods, but not necessarily .active methods.
Unfortunately people have since written regsets without .set methods.

Rather than putting in stub functions everywhere, handle regsets with
null .get or .set methods explicitly.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@hack.frob.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoperf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
Joerg Roedel [Wed, 29 Feb 2012 13:57:32 +0000 (14:57 +0100)]
perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled

It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.

This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.

The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoALSA: hda - Kill hyphenated names
Takashi Iwai [Thu, 1 Mar 2012 17:14:41 +0000 (18:14 +0100)]
ALSA: hda - Kill hyphenated names

Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 2 Mar 2012 07:40:45 +0000 (08:40 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Various smaller perf/urgent fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Fri, 2 Mar 2012 02:27:43 +0000 (18:27 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog

Watchdog updates from Wim Van Sebroeck:

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix GETTIMEOUT ioctl in booke_wdt
  watchdog: update maintainers git entry
  watchdog: Fix typo in pnx4008_wdt.c
  watchdog: Fix typo in Kconfig
  watchdog: fix error in probe() of s3c2410_wdt (reset at booting)
  watchdog: hpwdt: clean up set_memory_x call for 32 bit

12 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Linus Torvalds [Fri, 2 Mar 2012 02:26:48 +0000 (18:26 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regulator

Pull from Mark Brown:
 "A simple, driver specific fix.  This device isn't widely used outside
  of Marvell reference boards most of which are probably used with their
  BSPs rather than with mainline so low risk."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix the ldo configure according to 88pm860x spec

12 years agoMerge branch 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6
Linus Torvalds [Fri, 2 Mar 2012 02:24:52 +0000 (18:24 -0800)]
Merge branch 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6

i2c bugfix from Wolfram Sang:
  "This patch fixes a wrong assumption in the mxs-i2c-driver about a
   command queue being done.  Without it, we have seen races when the
   bus was under load."

* 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6:
  i2c: mxs: only flag completion when queue is completely done

12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 2 Mar 2012 02:23:43 +0000 (18:23 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

DRM fixes from Dave Airlie:
  intel: fixes for output regression on 965GM, an oops and a machine
  hang

  radeon: uninitialised var (that gcc didn't warn about for some reason)
  + a couple of correctness fixes.

  exynos: fixes for various things, drop some chunks of unused code.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
  drm/radeon: fix uninitialized variable
  drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
  drm/i915: Remove use of the autoreported ringbuffer HEAD position
  drm/i915: Prevent a machine hang by checking crtc->active before loading lut
  drm/i915: fix operator precedence when enabling RC6p
  drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
  drm/i915: fix mode set on load pipe. (v2)
  drm/exynos: exynos_drm.h header file fixes
  drm/exynos: added panel physical size.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 2 Mar 2012 02:22:55 +0000 (18:22 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] memory hotplug: prevent memory zone interleave
  [S390] crash_dump: remove duplicate include
  [S390] KEYS: Enable the compat keyctl wrapper on s390x

12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Thu, 1 Mar 2012 13:17:07 +0000 (14:17 +0100)]
Merge tag 'asoc-3.3' of git://git./linux/kernel/git/broonie/sound into for-linus

A small fix for the SSI driver and a fix for system shutdown with modern
devices.  Most of the modern devices will never get shut down normally
with a visible kernel log as the systems they're in tend not to shut
down often and when they do it's usually in form factors that don't have
a user visible console.

12 years agomemblock: Fix size aligning of memblock_alloc_base_nid()
Tejun Heo [Tue, 28 Feb 2012 20:56:21 +0000 (05:56 +0900)]
memblock: Fix size aligning of memblock_alloc_base_nid()

memblock allocator aligns @size to @align to reduce the amount
of fragmentation.  Commit:

 7bd0b0f0da ("memblock: Reimplement memblock allocation using reverse free area iterator")

Broke it by incorrectly relocating @size aligning to
memblock_find_in_range_node().  As the aligned size is not
propagated back to memblock_alloc_base_nid(), the actually
reserved size isn't aligned.

While this increases memory use for memblock reserved array,
this shouldn't cause any critical failure; however, it seems
that the size aligning was hiding a use-beyond-allocation bug in
sparc64 and losing the aligning causes boot failure.

The underlying problem is currently being debugged but this is a
proper fix in itself, it's already pretty late in -rc cycle for
boot failures and reverting the change for debugging isn't
difficult. Restore the size aligning moving it to
memblock_alloc_base_nid().

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120228205621.GC3252@dhcp-172-17-108-109.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <alpine.SOC.1.00.1202130942030.1488@math.ut.ee>

12 years agoMerge tag 'for-linus' of git://github.com/rustyrussell/linux
Linus Torvalds [Wed, 29 Feb 2012 23:14:33 +0000 (15:14 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux

Merge virtio pull request from Rusty Russell.

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  virtio: balloon: leak / fill balloon across S4

12 years agovirtio: balloon: leak / fill balloon across S4
Amit Shah [Wed, 29 Feb 2012 12:12:51 +0000 (17:42 +0530)]
virtio: balloon: leak / fill balloon across S4

commit e562966dbaf49e7804097cd991e5d3a8934fc148 added support for S4 to
the balloon driver.  The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful.  Also, if S4 wasn't successful,
the guest would have to re-fill the balloon.  On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.

However, this wasn't done right.  The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4.  Just a fancy way of
leaking lots of memory.

Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths.  This works properly now.  The optimisation to not
leak can be added later on after a bit of refactoring of the code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
12 years agoOMAPDSS: APPLY: make ovl_enable/disable synchronous
Tomi Valkeinen [Wed, 29 Feb 2012 08:48:22 +0000 (10:48 +0200)]
OMAPDSS: APPLY: make ovl_enable/disable synchronous

ovl->enable/disable are meant to be synchronous so that they can handle
the configuration of fifo sizes. The current kernel doesn't configure
fifo sizes yet, and so the code doesn't need to block to function (from
omapdss driver's perspective).

However, for the users of omapdss a non-blocking ovl->disable is
confusing, because they don't know when the memory area is not used
any more.

Furthermore, when the fifo size configuration is added in the next merge
window, the change from non-blocking to blocking could cause side
effects to the users of omapdss. So by making the functions block
already will keep them behaving in the same manner.

And, while not the main purpose of this patch, this will also remove the
compile warning:

drivers/video/omap2/dss/apply.c:350: warning:
'wait_pending_extra_info_updates' defined but not used

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
12 years agoOMAPDSS: panel-dvi: Add Kconfig dependency on I2C
Tomi Valkeinen [Wed, 29 Feb 2012 08:48:21 +0000 (10:48 +0200)]
OMAPDSS: panel-dvi: Add Kconfig dependency on I2C

panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add
it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
12 years agoperf probe: Ensure offset provided is not greater than function length without DWARF...
Prashanth Nageshappa [Tue, 28 Feb 2012 04:13:01 +0000 (09:43 +0530)]
perf probe: Ensure offset provided is not greater than function length without DWARF info too

The 'perf probe' command allows kprobe to be inserted at any offset from
a function start, which results in adding kprobes to unintended
location.  (example: perf probe do_fork+10000 is allowed even though
size of do_fork is ~904).

My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case
where DWARF info was available for the kernel. This patch fixes the
case where perf probe is used on a kernel without debuginfo available.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf tools: Ensure comm string is properly terminated
David Ahern [Fri, 24 Feb 2012 19:31:38 +0000 (12:31 -0700)]
perf tools: Ensure comm string is properly terminated

If threads in a multi-threaded process have names shorter than the main
thread the comm for the named threads is not properly terminated.

E.g., for the process 'namedthreads' where each thread is named noploop%d
where %d is the thread number:

Before:
    perf script -f comm,tid,ip,sym,dso
    noploop:4ads 21616  400a49 noploop (/tmp/namedthreads)
The 'ads' in the thread comm bleeds over from the process name.

After:
    perf script -f comm,tid,ip,sym,dso
       noploop:4 21616  400a49 noploop (/tmp/namedthreads)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf probe: Ensure offset provided is not greater than function length
Prashanth Nageshappa [Fri, 24 Feb 2012 07:41:39 +0000 (13:11 +0530)]
perf probe: Ensure offset provided is not greater than function length

The perf probe command allows kprobe to be inserted at any offset from a
function start, which results in adding kprobes to unintended location.

Example: perf probe do_fork+10000 is allowed even though size of do_fork
is ~904.

This patch will ensure probe addition fails when the offset specified is
greater than size of the function.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf evlist: Return first evsel for non-sample event on old kernel
Namhyung Kim [Mon, 20 Feb 2012 01:47:26 +0000 (10:47 +0900)]
perf evlist: Return first evsel for non-sample event on old kernel

On old kernels that don't support sample_id_all feature,
perf_evlist__id2evsel() returns NULL for non-sampling events.

This breaks perf top when multiple events are given on command line. Fix
it by using first evsel in the evlist. This will also prevent getting
the same (potential) problem in such new tool/ old kernel combo.

Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoMerge tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Wed, 29 Feb 2012 19:24:39 +0000 (11:24 -0800)]
Merge tag 'fixes-3.3-rc6' of git://git./linux/kernel/git/arm/arm-soc

Arnd Bergmann says:
 "Another set of arm-soc bug fixes on top of v3.3-rc5.  The few larger
  bits are all for devices that still need to get set up in board code.

  Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."

* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28
  ARM: OMAP2: fix mailbox init code
  ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  ARM: OMAP1: Fix out-of-bounds array access for Innovator
  OMAP3 EVM: remove out-of-bounds array access of gpio_leds
  ARM: OMAP: Fix build error when mmc_omap is built as module
  ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
  pxa/hx4700: add platform device and I2C info for AK4641 codec
  arch/arm/mach-pxa/: included linux/gpio.h twice
  arch/arm/mach-mmp/: some files include some headers twice
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  ARM: pxa: fix including linux/gpio.h twice
  ARM: pxa: fix mixed declarations and code in sharpsl_pm
  ARM: pxa: fix wrong parsing gpio event on spitz
  ARM: OMAP2+: usb-host: fix compile warning
  ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
  ...

12 years agoMerge tag 'for-3.3' of git://openrisc.net/jonas/linux
Linus Torvalds [Wed, 29 Feb 2012 18:23:45 +0000 (10:23 -0800)]
Merge tag 'for-3.3' of git://openrisc.net/jonas/linux

Build fixes for 3.3 from Jonas Bonn

* tag 'for-3.3' of git://openrisc.net/jonas/linux:
  openrisc: Fix up audit_syscall_[entry|exit]() usage
  openrisc: include export.h for EXPORT_SYMBOL

12 years agodrm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
Sebastian Biemueller [Wed, 29 Feb 2012 16:04:52 +0000 (11:04 -0500)]
drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()

The bo is removed from the list at the top of
radeon_vm_bo_rmv(), but then the list is used
in radeon_vm_bo_update_pte() to look up the vm.
remove the bo_list entry at the end of the
function instead.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoALSA: hda - Add a fake mute feature
Takashi Iwai [Mon, 27 Feb 2012 14:00:58 +0000 (15:00 +0100)]
ALSA: hda - Add a fake mute feature

Some codecs don't supply the mute amp-capabilities although the lowest
volume gives the mute.  It'd be handy if the parser provides the mute
mixers in such a case.

This patch adds an extension amp-cap bit (which is used only in the
driver) to represent the min volume = mute state.  Also modified the
amp cache code to support the fake mute feature when this bit is set
but the real mute bit is unset.

In addition, conexant cx5051 parser uses this new feature to implement
the missing mute controls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42825

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agodrm/radeon: fix uninitialized variable
Christian König [Tue, 28 Feb 2012 22:19:20 +0000 (23:19 +0100)]
drm/radeon: fix uninitialized variable

Without this fix the driver randomly treats
textures as arrays and I'm really wondering
why gcc isn't complaining about it.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoMerge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6...
Dave Airlie [Wed, 29 Feb 2012 09:54:24 +0000 (09:54 +0000)]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung into HEAD

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung:
  drm/exynos: exynos_drm.h header file fixes
  drm/exynos: added panel physical size.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c

12 years agodrm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
Alex Deucher [Tue, 28 Feb 2012 16:08:22 +0000 (11:08 -0500)]
drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)

Need to call ExternalEncoderControl to set up DDC before
trying to get an EDID for all DP bridge chips (including
DP to LVDS).

Also remove redundant encoder assignment.

V2: fix typo in commit message.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agowatchdog: fix GETTIMEOUT ioctl in booke_wdt
Dmitry Artamonow [Thu, 26 Jan 2012 19:24:30 +0000 (23:24 +0400)]
watchdog: fix GETTIMEOUT ioctl in booke_wdt

Commit dcfb748422 ([WATCHDOG] fix book E watchdog to take
WDIOC_SETTIMEOUT arg in seconds) fixed SETTIMEOUT ioctl
to use seconds as a parameter instead of some hardware-specific
"period", but missed to apply similar changes to GETTIMEOUT,
so it still returns "period" value. Let's fix it!
Also, while at it, make SETTIMEOUT ioctl return real timeout
value as it should do according to the documentation.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agoALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs
Takashi Iwai [Wed, 29 Feb 2012 08:41:17 +0000 (09:41 +0100)]
ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs

A bug report with an old Sony laptop showed that we can't rely on BIOS
setting the pins of headphones but the driver should set always by
itself.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoecryptfs: fix printk format warning for size_t
Randy Dunlap [Wed, 29 Feb 2012 00:31:12 +0000 (16:31 -0800)]
ecryptfs: fix printk format warning for size_t

Fix printk format warning (from Linus's suggestion):

on i386:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

and on x86_64:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agohwmon: (f75375s) Make pwm*_mode writable for the F75387
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:52 +0000 (22:15 +0100)]
hwmon: (f75375s) Make pwm*_mode writable for the F75387

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agohwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:51 +0000 (22:15 +0100)]
hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387

For the F75387, the register holding the current PWM duty cycle value is
r/o; changing it requires writing to the fan expect register instead.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Simplified function parameters]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Linus Torvalds [Tue, 28 Feb 2012 17:17:31 +0000 (09:17 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-3.0-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Read resource groups on mount
  GFS2: Ensure rindex is uptodate for fallocate
  GFS2: Read in rindex if necessary during unlink
  GFS2: Fix race between lru_list and glock ref count

12 years agoMerge tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 28 Feb 2012 17:15:31 +0000 (09:15 -0800)]
Merge tag 'iommu-fixes-v3.3-rc5' of git://git./linux/kernel/git/joro/iommu

IOMMU fixes for Linux 3.3-rc5

All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.

The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.

* tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  iommu/omap: fix NULL pointer dereference
  iommu/omap: fix erroneous omap-iommu-debug API calls

12 years agowatchdog: update maintainers git entry
Wim Van Sebroeck [Tue, 28 Feb 2012 16:11:05 +0000 (17:11 +0100)]
watchdog: update maintainers git entry

The git repository for watchdog device drivers moved.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: Fix typo in pnx4008_wdt.c
Masanari Iida [Fri, 10 Feb 2012 15:40:56 +0000 (00:40 +0900)]
watchdog: Fix typo in pnx4008_wdt.c

Correct spelling "resouce" to "resource" in
drivers/watchdog/pnx4008_wdt.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>