gru: use proc_create()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio: ifdef fields in mm_struct

->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memstick: move dev_dbg

id_reg.if_mode might be unitialized when (*mrq)->error is nonzero.  move
dev_dbg() inside the if so that we are sure we can use id_reg values.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

adfs: remove redundant test on unsigned

unsigned block cannot be less than 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: core: remove completion-wait for complete with rcu_barrier

Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c
and edac_pci.c.

They all use a wait_for_completion() scheme, but this scheme it not 100%
safe on multiple CPUs.  See the _rcu_barrier() implementation which
explains why extra precausion is needed.

The patch adds a comment about rcu_barrier() and as a precausion calls
rcu_barrier().  A maintainer needs to look at removing the
wait_for_completion code.

[dougthompson@xmission.com: remove the wait_for_completion code]
Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: i3200 memory controller driver

A driver for the Intel 3200 and 3210 memory controllers.  It has only had
light testing so far, and currently makes no attempt to decode error
addresses at anything finer than csrow granularity.

Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: fix resource size calculation

Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: mpc85xx add mpc83xx support

Add support for the Freescale MPC83xx memory controller to the existing
driver for the Freescale MPC85xx memory controller.  The only difference
between the two processors are in the CS_BNDS register parsing code, which
has been changed so it will work on both processors.

The L2 cache controller does not exist on the MPC83xx, but the OF
subsystem will not use the driver if the device is not present in the OF
device tree.

I had to change the nr_pages calculation to make the math work out.  I
checked it on my board and did the math by hand for a 64GB 85xx using 64K
pages.  In both cases, nr_pages * PAGE_SIZE comes out to the correct
value.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: mpc85xx add P2020DS support

Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC
compatible lists so that EDAC can recognize P2020 meomry controller and L2
cache controller and export the relevant fields to sysfs.

EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a
P2020DS board so that EDAC core can recognize DDR3 memory type.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Acked-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/futex.h: place kernel types behind __KERNEL__

The forward decls for some kernel types are only needed by the code behind
__KERNEL__, so don't bleed these types to userspace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pidns: deny CLONE_PARENT|CLONE_NEWPID combination

CLONE_PARENT was used to implement an older threading model.  For
consistency with the CLONE_THREAD check in copy_pid_ns(), disable
CLONE_PARENT with CLONE_NEWPID, at least until the required semantics of
pid namespaces are clear.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fork(): disable CLONE_PARENT for init

When global or container-init processes use CLONE_PARENT, they create a
multi-rooted process tree.  Besides siblings of global init remain as
zombies on exit since they are not reaped by their parent (swapper).  So
prevent global and container-inits from creating siblings.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: remove "struct file *" argument of ->proc_handler

It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Matt Mackall and Herbert Xu to HARDWARE RANDOM NUMBER GENERATOR

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bfin-otp: add writing support

The on-chip OTP may be written at runtime, so enable support for it in the
driver.  However, since writing should really be done only on development
systems, don't bend over backwards to make sure the simple software lock
is per-fd -- per-device is OK.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/uv_mmtimer.c: add memory mapped RTC driver for UV

This driver memory maps the UV Hub RTC.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/rio/rioctrl.c: off by one error in rioctrl.c

If DownLoad.ProductCode == MAX_PRODUCT, that would be a problem when we do
RIOBootTable[DownLoad.ProductCode] a couple lines down.

Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hpet: hpet driver periodic timer setup bug fixes

The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).

With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value.  This results in
wrong periodicity for the interrupts.  For, periodic interrupts to work,
following steps are necessary, in that order.

* Set config with Tn_VAL_SET_CNF bit

* Write to hidden accumulator, the value written is the time when the
  first interrupt should be generated

* Write compartor with period interval for subsequent interrupts
  (http://www.intel.com/hardwaredesign/hpetspec_1.pdf )

When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.

Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts.  This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mwave: fix read buffer overflow

Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/char_dev.c: remove useless loop

There are two useless lines in fs/char_dev.c.

In register_chrdev there is a loop to change all '/' into '!' in the
kernel object name.
This code is useless as the same substitution is in kobject_set_name_vargs in
lib/kobject.c:
228         /* ewww... some of these buggers have '/' in the name ... */
229         while ((s = strchr(kobj->name, '/')))
230                 s[0] = '!';

kobject_set_name_vargs is called by kobject_set_name.
kobject_set_name is called just above the useless loop.

[hidave.darkstar@gmail.com: fix warning, remove the unused char *s]
Signed-off-by: Renzo Davoli <renzo@cs.unibo.it>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/dev/zero: avoid repeated access_ok() checks

In read_zero, we check for access_ok() once for the count bytes.  It is
unnecessarily checked again in clear_user.  Use __clear_user, which does
not check for access_ok().

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

flat: use IS_ERR_VALUE() helper macro

There is a common macro now for testing mixed pointer/errno values, so use
that rather than handling the casts ourself.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David McCullough <david_mccullough@securecomputing.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fdpic: ignore the loader's PT_GNU_STACK when calculating the stack size

Ignore the loader's PT_GNU_STACK when calculating the stack size, and only
consider the executable's PT_GNU_STACK, assuming the executable has one.

Currently the behaviour is to take the largest stack size and use that,
but that means you can't reduce the stack size in the executable.  The
loader's stack size should probably only be used when executing the loader
directly.

WARNING: This patch is slightly dangerous - it may render a system
inoperable if the loader's stack size is larger than that of important
executables, and the system relies unknowingly on this increasing the size
of the stack.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

elf: clean up fill_note_info()

Introduce a helper function elf_note_info_init() to help fill_note_info()
to do initializations, also fix the potential memory leaks.

[akpm@linux-foundation.org: remove NUM_NOTES]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signals: inline __fatal_signal_pending

__fatal_signal_pending inlines to one instruction on x86, probably two
instructions on other machines.  It takes two longer x86 instructions just
to call it and test its return value, not to mention the function itself.

On my random x86_64 config, this saved 70 bytes of text (59 of those being
__fatal_signal_pending itself).

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fcntl: add F_[SG]ETOWN_EX

In order to direct the SIGIO signal to a particular thread of a
multi-threaded application we cannot, like suggested by the manpage, put a
TID into the regular fcntl(F_SETOWN) call.  It will still be send to the
whole process of which that thread is part.

Since people do want to properly direct SIGIO we introduce F_SETOWN_EX.

The need to direct SIGIO comes from self-monitoring profiling such as with
perf-counters.  Perf-counters uses SIGIO to notify that new sample data is
available.  If the signal is delivered to the same task that generated the
new sample it can augment that data by inspecting the task's user-space
state right after it returns from the kernel.  This is esp.  convenient
for interpreted or virtual machine driven environments.

Both F_SETOWN_EX and F_GETOWN_EX take a pointer to a struct f_owner_ex
as argument:

struct f_owner_ex {
int   type;
pid_t pid;
};

Where type is one of F_OWNER_TID, F_OWNER_PID or F_OWNER_GID.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: stephane eranian <eranian@googlemail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signals: send_sigio: use do_send_sig_info() to avoid check_kill_permission()

group_send_sig_info()->check_kill_permission() assumes that current is the
sender and uses current_cred().

This is not true in send_sigio_to_task() case.  From the security pov the
sender is not current, but the task which did fcntl(F_SETOWN), that is why
we have sigio_perm() which uses the right creds to check.

Fortunately, send_sigio() always sends either SEND_SIG_PRIV or
SI_FROMKERNEL() signal, so check_kill_permission() does nothing.  But
still it would be tidier to avoid this bogus security check and save a
couple of cycles.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signals: introduce do_send_sig_info() helper

Introduce do_send_sig_info() and convert group_send_sig_info(),
send_sig_info(), do_send_specific() to use this helper.

Hopefully it will have more users soon, it allows to specify
specific/group behaviour via "bool group" argument.

Shaves 80 bytes from .text.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: fix set_binfmt() vs sys_delete_module() race

sys_delete_module() can set MODULE_STATE_GOING after
search_binary_handler() does try_module_get().  In this case
set_binfmt()->try_module_get() fails but since none of the callers
check the returned error, the task will run with the wrong old
->binfmt.

The proper fix should change all ->load_binary() methods, but we can
rely on fact that the caller must hold a reference to binfmt->module
and use __module_get() which never fails.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: allow do_coredump() to wait for user space pipe readers to complete

Allow core_pattern pipes to wait for user space to complete

One of the things that user space processes like to do is look at metadata
for a crashing process in their /proc/<pid> directory.  this is racy
however, since do_coredump in the kernel doesn't wait for the user space
process to complete before it reaps the crashing process.  This patch
corrects that.  Allowing the kernel to wait for the user space process to
complete before cleaning up the crashing process.  This is a bit tricky to
do for a few reasons:

1) The user space process isn't our child, so we can't sys_wait4 on it
2) We need to close the pipe before waiting for the user process to complete,
since the user process may rely on an EOF condition

I've discussed several solutions with Oleg Nesterov off-list about this,
and this is the one we've come up with.  We add ourselves as a pipe reader
(to prevent premature cleanup of the pipe_inode_info), and remove
ourselves as a writer (to provide an EOF condition to the writer in user
space), then we iterate until the user space process exits (which we
detect by pipe->readers == 1, hence the > 1 check in the loop).  When we
exit the loop, we restore the proper reader/writer values, then we return
and let filp_close in do_coredump clean up the pipe data properly.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: let do_coredump() limit the number of concurrent dumps to pipes

Introduce core pipe limiting sysctl.

Since we can dump cores to pipe, rather than directly to the filesystem,
we create a condition in which a user can create a very high load on the
system simply by running bad applications.

If the pipe reader specified in core_pattern is poorly written, we can
have lots of ourstandig resources and processes in the system.

This sysctl introduces an ability to limit that resource consumption.
core_pipe_limit defines how many in-flight dumps may be run in parallel,
dumps beyond this value are skipped and a note is made in the kernel log.
A special value of 0 in core_pipe_limit denotes unlimited core dumps may
be handled (this is the default value).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: make do_coredump() more resilient to recursive crashes

Change how we detect recursive dumps.

Currently we have a mechanism by which we try to compare pathnames of the
crashing process to the core_pattern path.  This is broken for a dozen
reasons, and just doesn't work in any sort of robust way.

I'm replacing it with the use of a 0 RLIMIT_CORE value.  Since helper apps
set RLIMIT_CORE to zero, we don't write out core files for any process
with that particular limit set.  It the core_pattern is a pipe, any
non-zero limit is translated to RLIM_INFINITY.

This allows complete dumps to be captured, but prevents infinite recursion
in the event that the core_pattern process itself crashes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signals: tracehook_notify_jctl change

This changes tracehook_notify_jctl() so it's called with the siglock held,
and changes its argument and return value definition.  These clean-ups
make it a better fit for what new tracing hooks need to check.

Tracing needs the siglock here, held from the time TASK_STOPPED was set,
to avoid potential SIGCONT races if it wants to allow any blocking in its
tracing hooks.

This also folds the finish_stop() function into its caller
do_signal_stop().  The function is short, called only once and only
unconditionally.  It aids readability to fold it in.

[oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state]
[oleg@redhat.com: introduce tracehook_finish_jctl() helper]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wait_noreap_copyout(): check for ->wo_info != NULL

Current behaviour of sys_waitid() looks odd.  If user passes infop ==
NULL, sys_waitid() returns success.  When user additionally specifies flag
WNOWAIT, sys_waitid() returns -EFAULT on the same conditions.  When user
combines WNOWAIT with WCONTINUED, sys_waitid() again returns success.

This patch adds check for ->wo_info in wait_noreap_copyout().

User-visible change: starting from this commit, sys_waitid() always checks
infop != NULL and does not fail if it is NULL.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait: fix sys_waitid()-specific behaviour

do_wait() checks ->wo_info to figure out who is the caller.  If it's not
NULL the caller should be sys_waitid(), in that case do_wait() fixes up
the retval or zeros ->wo_info, depending on retval from underlying
function.

This is bug: user can pass ->wo_info == NULL and sys_waitid() will return
incorrect value.

man 2 waitid says:

waitid(): returns 0 on success

Test-case:

int main(void)
{
if (fork())
assert(waitid(P_ALL, 0, NULL, WEXITED) == 0);

return 0;
}

Result:

Assertion `waitid(P_ALL, 0, ((void *)0), 4) == 0' failed.

Move that code to sys_waitid().

User-visible change: sys_waitid() will return 0 on success, either
infop is set or not.

Note, there's another bug in wait_noreap_copyout() which affects
return value of sys_waitid(). It will be fixed in next patch.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wait_consider_task: kill "parent" argument

Kill the unused "parent" argument in wait_consider_task(), it was never used.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait-wakeup-optimization: simplify task_pid_type()

task_pid_type() is only used by eligible_pid() which has to check wo_type
!= PIDTYPE_MAX anyway.  Remove this check from task_pid_type() and factor
out ->pids[type] access, this shrinks .text a bit and simplifies the code.

The matches the behaviour of other similar helpers, say get_task_pid().
The caller must ensure that pid_type is valid, not the callee.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait-wakeup-optimization: fix child_wait_callback()->eligible_child() usage

child_wait_callback()->eligible_child() is not right, we can miss the
wakeup if the task was detached before __wake_up_parent() and the caller
of do_wait() didn't use __WALL.

Move ->wo_pid checks from eligible_child() to the new helper,
eligible_pid(), and change child_wait_callback() to use it instead of
eligible_child().

Note: actually I think it would be better to fix the __WCLONE check in
eligible_child(), it doesn't look exactly right.  But it is not clear what
is the supposed behaviour, and any change is user-visible.

Reported-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait() wakeup optimization: child_wait_callback: check __WNOTHREAD case

Suggested by Roland.

do_wait(__WNOTHREAD) can only succeed if the caller is either ptracer, or
it is ->real_parent and the child is not traced. IOW, caller == p->parent
otherwise we should not wake up.

Change child_wait_callback() to check this. Ratan reports the workload with
CPU load >99% caused by unnecessary wakeups, should be fixed by this patch.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait() wakeup optimization: change __wake_up_parent() to use filtered wakeup

Ratan Nalumasu reported that in a process with many threads doing
unnecessary wakeups.  Every waiting thread in the process wakes up to loop
through the children and see that the only ones it cares about are still
not ready.

Now that we have struct wait_opts we can change do_wait/__wake_up_parent
to use filtered wakeups.

We can make child_wait_callback() more clever later, right now it only
checks eligible_child().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_wait() wakeup optimization: shift security_task_wait() from eligible_child() to wait_consider_task()

Preparation, no functional changes.

eligible_child() has a single caller, wait_consider_task(). We can move
security_task_wait() out from eligible_child(), this allows us to use it
for filtered wake_up().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: __ptrace_detach: do __wake_up_parent() if we reap the tracee

The bug is old, it wasn't cause by recent changes.

Test case:

static void *tfunc(void *arg)
{
int pid = (long)arg;

assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0);
kill(pid, SIGKILL);

sleep(1);
return NULL;
}

int main(void)
{
pthread_t th;
long pid = fork();

if (!pid)
pause();

signal(SIGCHLD, SIG_IGN);
assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0);

int r = waitpid(-1, NULL, __WNOTHREAD);
printf("waitpid: %d %m\n", r);

return 0;
}

Before the patch this program hangs, after this patch waitpid() correctly
fails with errno == -ECHILD.

The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its
->real_parent is our sub-thread and we ignore SIGCHLD.  But in this case
we should wake up other threads which can sleep in do_wait().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: show swap usage in stat file

We now count MEM_CGROUP_STAT_SWAPOUT, so we can show swap usage.  It would
be useful for users to show swap usage in memory.stat file, because they
don't need calculate memsw.usage - res.usage to know swap usage.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: improve resource counter scalability

Reduce the resource counter overhead (mostly spinlock) associated with the
root cgroup.  This is a part of the several patches to reduce mem cgroup
overhead.  I had posted other approaches earlier (including using percpu
counters).  Those patches will be a natural addition and will be added
iteratively on top of these.

The patch stops resource counter accounting for the root cgroup.  The data
for display is derived from the statisitcs we maintain via
mem_cgroup_charge_statistics (which is more scalable).  What happens today
is that, we do double accounting, once using res_counter_charge() and once
using memory_cgroup_charge_statistics().  For the root, since we don't
implement limits any more, we don't need to track every charge via
res_counter_charge() and check for limit being exceeded and reclaim.

The main mem->res usage_in_bytes can be derived by summing the cache and
rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE).  However, for memsw->res usage_in_bytes, we need
additional data about swapped out memory.  This patch adds a
MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE to derive the memsw data.  This data is computed
recursively when hierarchy is enabled.

The tests results I see on a 24 way show that

1. The lock contention disappears from /proc/lock_stats
2. The results of the test are comparable to running with
   cgroup_disable=memory.

Here is a sample of my program runs

Without Patch

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7192804.124144  task-clock-msecs         #     23.937 CPUs
         424691  context-switches         #      0.000 M/sec
            267  CPU-migrations           #      0.000 M/sec
       28498113  page-faults              #      0.004 M/sec
  5826093739340  cycles                   #    809.989 M/sec
   408883496292  instructions             #      0.070 IPC
     7057079452  cache-references         #      0.981 M/sec
     3036086243  cache-misses             #      0.422 M/sec

  300.485365680  seconds time elapsed

With cgroup_disable=memory

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7182183.546587  task-clock-msecs         #     23.915 CPUs
         425458  context-switches         #      0.000 M/sec
            203  CPU-migrations           #      0.000 M/sec
       92545093  page-faults              #      0.013 M/sec
  6034363609986  cycles                   #    840.185 M/sec
   437204346785  instructions             #      0.072 IPC
     6636073192  cache-references         #      0.924 M/sec
     2358117732  cache-misses             #      0.328 M/sec

  300.320905827  seconds time elapsed

With this patch applied

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7191619.223977  task-clock-msecs         #     23.955 CPUs
         422579  context-switches         #      0.000 M/sec
             88  CPU-migrations           #      0.000 M/sec
       91946060  page-faults              #      0.013 M/sec
  5957054385619  cycles                   #    828.333 M/sec
  1058117350365  instructions             #      0.178 IPC
     9161776218  cache-references         #      1.274 M/sec
     1920494280  cache-misses             #      0.267 M/sec

  300.218764862  seconds time elapsed

Data from Prarit (kernel compile with make -j64 on a 64
CPU/32G machine)

For a single run

Without patch

real 27m8.988s
user 87m24.916s
sys 382m6.037s

With patch

real    4m18.607s
user    84m58.943s
sys     50m52.682s

With config turned off

real    4m54.972s
user    90m13.456s
sys     50m19.711s

NOTE: The data looks counterintuitive due to the increased performance
with the patch, even over the config being turned off. We probably need
more runs, but so far all testing has shown that the patches definitely
help.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory controller: soft limit reclaim on contention

Implement reclaim from groups over their soft limit

Permit reclaim from memory cgroups on contention (via the direct reclaim
path).

memory cgroup soft limit reclaim finds the group that exceeds its soft
limit by the largest number of pages and reclaims pages from it and then
reinserts the cgroup into its correct place in the rbtree.

Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long
loops in case all swap is turned off.  The code has been refactored and
the loop check (loop < 2) has been enhanced for soft limits.  For soft
limits, we try to do more targetted reclaim.  Instead of bailing out after
two loops, the routine now reclaims memory proportional to the size by
which the soft limit is exceeded.  The proportion has been empirically
determined.

[akpm@linux-foundation.org: build fix]
[kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling]
[nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory controller: soft limit refactor reclaim flags

Refactor mem_cgroup_hierarchical_reclaim()

Refactor the arguments passed to mem_cgroup_hierarchical_reclaim() into
flags, so that new parameters don't have to be passed as we make the
reclaim routine more flexible

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory controller: soft limit organize cgroups

Organize cgroups over soft limit in a RB-Tree

Introduce an RB-Tree for storing memory cgroups that are over their soft
limit.  The overall goal is to

1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
   We are careful about updates, updates take place only after a particular
   time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
   limit

The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.

[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory controller: soft limit interface

Add an interface to allow get/set of soft limits.  Soft limits for memory
plus swap controller (memsw) is currently not supported.  Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added.  Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.

Kamezawa-San raised a question as to whether soft limit should belong to
res_counter.  Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here.  Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory controller: soft limit documentation

Soft limits is a new feature for the memory resource controller, something
similar has existed in the group scheduler in the form of shares.  The CPU
controllers interpretation of shares is very different though.

Soft limits are the most useful feature to have for environments where the
administrator wants to overcommit the system, such that only on memory
contention do the limits become active.  The current soft limits
implementation provides a soft_limit_in_bytes interface for the memory
controller and not for memory+swap controller.  The implementation
maintains an RB-Tree of groups that exceed their soft limit and starts
reclaiming from the group that exceeds this limit by the maximum amount.

This patch:

Add documentation for soft limits

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: add comments explaining memory barriers

Add comments for the reason of smp_wmb() in mem_cgroup_commit_charge().

[akpm@linux-foundation.org: coding-style fixes]
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove the overhead associated with the root cgroup

Change the memory cgroup to remove the overhead associated with accounting
all pages in the root cgroup.  As a side-effect, we can no longer set a
memory hard limit in the root cgroup.

A new flag to track whether the page has been accounted or not has been
added as well.  Flags are now set atomically for page_cgroup,
pcg_default_flags is now obsolete and removed.

[akpm@linux-foundation.org: fix a few documentation glitches]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time

Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc.  (This is a
pre-patch to cgroup-procs-writable.patch.)

Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader.  No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.

[hidave.darkstar@gmail.com: fix build]
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: change css_set freeing mechanism to be under RCU

Changes css_set freeing mechanism to be under RCU

This is a prepatch for making the procs file writable. In order to free the
old css_sets for each task to be moved as they're being moved, the freeing
mechanism must be RCU-protected, or else we would have to have a call to
synchronize_rcu() for each task before freeing its old css_set.

Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: use vmalloc for large cgroups pidlist allocations

Separates all pidlist allocation requests to a separate function that
judges based on the requested size whether or not the array needs to be
vmalloced or can be gotten via kmalloc, and similar for kfree/vfree.

Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: ensure correct concurrent opening/reading of pidlists across pid namespaces

Previously there was the problem in which two processes from different pid
namespaces reading the tasks or procs file could result in one process
seeing results from the other's namespace.  Rather than one pidlist for
each file in a cgroup, we now keep a list of pidlists keyed by namespace
and file type (tasks versus procs) in which entries are placed on demand.
Each pidlist has its own lock, and that the pidlists themselves are passed
around in the seq_file's private pointer means we don't have to touch the
cgroup or its master list except when creating and destroying entries.

Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: add a read-only "procs" file similar to "tasks" that shows only unique tgids

struct cgroup used to have a bunch of fields for keeping track of the
pidlist for the tasks file.  Those are now separated into a new struct
cgroup_pidlist, of which two are had, one for procs and one for tasks.
The way the seq_file operations are set up is changed so that just the
pidlist struct gets passed around as the private data.

Interface example: Suppose a multithreaded process has pid 1000 and other
threads with ids 1001, 1002, 1003:
$ cat tasks
1000
1001
1002
1003
$ cat cgroup.procs
1000
$

Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: revert "cgroups: fix pid namespace bug"

The following series adds a "cgroup.procs" file to each cgroup that
reports unique tgids rather than pids, and allows all threads in a
threadgroup to be atomically moved to a new cgroup.

The subsystem "attach" interface is modified to support attaching whole
threadgroups at a time, which could introduce potential problems if any
subsystem were to need to access the old cgroup of every thread being
moved.  The attach interface may need to be revised if this becomes the
case.

Also added is functionality for read/write locking all CLONE_THREAD
fork()ing within a threadgroup, by means of an rwsem that lives in the
sighand_struct, for per-threadgroup-ness and also for sharing a cacheline
with the sighand's atomic count.  This scheme should introduce no extra
overhead in the fork path when there's no contention.

The final patch reveals potential for a race when forking before a
subsystem's attach function is called - one potential solution in case any
subsystem has this problem is to hang on to the group's fork mutex through
the attach() calls, though no subsystem yet demonstrates need for an
extended critical section.

This patch:

Revert

commit 096b7fe012d66ed55e98bc8022405ede0cc80e96
Author:     Li Zefan <lizf@cn.fujitsu.com>
AuthorDate: Wed Jul 29 15:04:04 2009 -0700
Commit:     Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Wed Jul 29 19:10:35 2009 -0700

    cgroups: fix pid namespace bug

This is in preparation for some clashing cgroups changes that subsume the
original commit's functionaliy.

The original commit fixed a pid namespace bug which Ben Blum fixed
independently (in the same way, but with different code) as part of a
series of patches.  I played around with trying to reconcile Ben's patch
series with Li's patch, but concluded that it was simpler to just revert
Li's, given that Ben's patch series contained essentially the same fix.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: allow cgroup hierarchies to be created with no bound subsystems

This patch removes the restriction that a cgroup hierarchy must have at
least one bound subsystem.  The mount option "none" is treated as an
explicit request for no bound subsystems.

A hierarchy with no subsystems can be useful for plain task tracking, and
is also a step towards the support for multiply-bindable subsystems.

As part of this change, the hierarchy id is no longer calculated from the
bitmask of subsystems in the hierarchy (since this is not guaranteed to be
unique) but is allocated via an ida.  Reference counts on cgroups from
css_set objects are now taken explicitly one per hierarchy, rather than
one per subsystem.

Example usage:

mount -t cgroup -o none,name=foo cgroup /mnt/cgroup

Based on the "no-op"/"none" subsystem concept proposed by
kamezawa.hiroyu@jp.fujitsu.com

Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: add a back-pointer from struct cg_cgroup_link to struct cgroup

Currently the cgroups code makes the assumption that the subsystem
pointers in a struct css_set uniquely identify the hierarchy->cgroup
mappings associated with the css_set; and there's no way to directly
identify the associated set of cgroups other than by indirecting through
the appropriate subsystem state pointers.

This patch removes the need for that assumption by adding a back-pointer
from struct cg_cgroup_link object to its associated cgroup; this allows
the set of cgroups to be determined by traversing the cg_links list in
the struct css_set.

Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: move the cgroup debug subsys into cgroup.c to access internal state

While it's architecturally clean to have the cgroup debug subsystem be
completely independent of the cgroups framework, it limits its usefulness
for debugging the contents of internal data structures.  Move the debug
subsystem code into the scope of all the cgroups data structures to make
more detailed debugging possible.

Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: support named cgroups hierarchies

To simplify referring to cgroup hierarchies in mount statements, and to
allow disambiguation in the presence of empty hierarchies and
multiply-bindable subsystems this patch adds support for naming a new
cgroup hierarchy via the "name=" mount option

A pre-existing hierarchy may be specified by either name or by subsystems;
a hierarchy's name cannot be changed by a remount operation.

Example usage:

# To create a hierarchy called "foo" containing the "cpu" subsystem
mount -t cgroup -oname=foo,cpu cgroup /mnt/cgroup1

# To mount the "foo" hierarchy on a second location
mount -t cgroup -oname=foo cgroup /mnt/cgroup2

Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: make unlock sequence in cgroup_get_sb consistent

Make the last unlock sequence consistent with previous unlock sequeue.

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: fix various Documentation/ paths in header files

Fix various Documentation/ paths in include/linux/.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page-types: add feature for walking process address space

Introduce "-p|--pid <pid>" for walking the process address space.  The
default action is to walk raw memory PFNs.

Both the virtual address and physical address of each present pages will
be listed:

# ./tools/vm/page-types -lp $$ | head -3
voffset offset  len     flags
400     11bebe  1       __RU_lA____M______________________
402     11bebc  1       __RU_lA____M______________________

Note that voffset/offset/len are now showed as hex numbers.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/vm/.gitignore: add page-types

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

includecheck fix: Documentation, cfag12864b-example.c

fix the following 'make includecheck' warning:

  Documentation/auxdisplay/cfag12864b-example.c: string.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: update stale definition of file-nr in fs.txt

In "documentation: update Documentation/filesystem/proc.txt and
Documentation/sysctls" (commit 760df93ec) we merged /proc/sys/fs
documentation in Documentation/sysctl/fs.txt and
Documentation/filesystem/proc.txt, but stale file-nr definition
remained.

This patch adds back the right fs-nr definition for 2.6 kernel.

Signed-off-by: Xiaotian Feng<dfeng@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc/filesystems: more mount cleanups

Documentation/filesystems/sharedsubtree.txt needs updating because the
mount command in util-linux package is well aware of shared subtree
features now.  The patch also fixes two typos in sharedsubtree.txt.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc/filesystems: remove smount program

mount(8) handles shared subtrees just fine, so remove the smount program
from Documentation/filesystems/sharedsubtree.txt.

Fix annoying "Lets" -> "Let's".
Insert space between '#' prompt and "mount" command.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

time: add function to convert between calendar time and broken-down time for universal use

There are many similar code in kernel for one object: convert time between
calendar time and broken-down time.

Here is some source I found:
  fs/ncpfs/dir.c
  fs/smbfs/proc.c
  fs/fat/misc.c
  fs/udf/udftime.c
  fs/cifs/netmisc.c
  net/netfilter/xt_time.c
  drivers/scsi/ips.c
  drivers/input/misc/hp_sdc_rtc.c
  drivers/rtc/rtc-lib.c
  arch/ia64/hp/sim/boot/fw-emu.c
  arch/m68k/mac/misc.c
  arch/powerpc/kernel/time.c
  arch/parisc/include/asm/rtc.h
  ...

We can make a common function for this type of conversion, At least we
can get following benefit:

1: Make kernel simple and unify
2: Easy to fix bug in converting code
3: Reduce clone of code in future
   For example, I'm trying to make ftrace display walltime,
   this patch will make me easy.

This code is based on code from glibc-2.6

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: do not call user_shm_lock() for MAP_HUGETLB fix

Commit 6bfde05bf5c ("hugetlbfs: allow the creation of files suitable for
MAP_PRIVATE on the vfs internal mount") altered can_do_hugetlb_shm() to
check if a file is being created for shared memory or mmap().  If this
returns false, we then unconditionally call user_shm_lock() triggering a
warning.  This block should never be entered for MAP_HUGETLB.  This
patch partially reverts the problem and fixes the check.

Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ksm: change default values to better fit into mainline kernel

Now that ksm is in mainline it is better to change the default values to
better fit to most of the users.

This patch change the ksm default values to be:

ksm_thread_pages_to_scan = 100 (instead of 200)
ksm_thread_sleep_millisecs = 20 (like before)
ksm_run = KSM_RUN_STOP (instead of KSM_RUN_MERGE - meaning ksm is
                        disabled by default)
ksm_max_kernel_pages = nr_free_buffer_pages / 4 (instead of 2046)

The important aspect of this patch is: it disables ksm by default, and sets
the number of the kernel_pages that can be allocated to be a reasonable
number.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry

Fix these warnings:

  drivers/built-in.o: In function `apanel_remove':
  apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `apanel_probe':
  apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `acpi_fujitsu_hotkey_add':
  fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register'
  fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `wbcir_probe':
  winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register'
  winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `wbcir_remove':
  winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `fujitsu_cleanup':
  fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister'
  fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister'

It happens because the new INPUT_WINBOND_CIR driver relies on new-leds
infrastructure - but does not select it in drivers/input/misc/Kconfig.
But it selects LEDS_CLASS, which confuses a number of other drivers into
thinking that all the leds infrastructure is in place.

Fix this by selecting NEW_LEDS as well, like similar drivers do.

Eventually, this whole leds infrastructure complexity should be
cleaned up, it's been going on for years.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits)
  cpumask: Move deprecated functions to end of header.
  cpumask: remove unused deprecated functions, avoid accusations of insanity
  cpumask: use new-style cpumask ops in mm/quicklist.
  cpumask: use mm_cpumask() wrapper: x86
  cpumask: use mm_cpumask() wrapper: um
  cpumask: use mm_cpumask() wrapper: mips
  cpumask: use mm_cpumask() wrapper: mn10300
  cpumask: use mm_cpumask() wrapper: m32r
  cpumask: use mm_cpumask() wrapper: arm
  cpumask: Use accessors for cpu_*_mask: um
  cpumask: Use accessors for cpu_*_mask: powerpc
  cpumask: Use accessors for cpu_*_mask: mips
  cpumask: Use accessors for cpu_*_mask: m32r
  cpumask: remove arch_send_call_function_ipi
  cpumask: arch_send_call_function_ipi_mask: s390
  cpumask: arch_send_call_function_ipi_mask: powerpc
  cpumask: arch_send_call_function_ipi_mask: mips
  cpumask: arch_send_call_function_ipi_mask: m32r
  cpumask: arch_send_call_function_ipi_mask: alpha
  cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64
  ...

headers: utsname.h redux

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "kmod: fix race in usermodehelper code"

This reverts commit c02e3f361c7 ("kmod: fix race in usermodehelper code")

The patch is wrong.  UMH_WAIT_EXEC is called with VFORK what ensures
that the child finishes prior returing back to the parent.  No race.

In fact, the patch makes it even worse because it does the thing it
claims not do:

 - It calls ->complete() on UMH_WAIT_EXEC

 - the complete() callback may de-allocated subinfo as seen in the
   following call chain:

    [<c009f904>] (__link_path_walk+0x20/0xeb4) from [<c00a094c>] (path_walk+0x48/0x94)
    [<c00a094c>] (path_walk+0x48/0x94) from [<c00a0a34>] (do_path_lookup+0x24/0x4c)
    [<c00a0a34>] (do_path_lookup+0x24/0x4c) from [<c00a158c>] (do_filp_open+0xa4/0x83c)
    [<c00a158c>] (do_filp_open+0xa4/0x83c) from [<c009ba90>] (open_exec+0x24/0xe0)
    [<c009ba90>] (open_exec+0x24/0xe0) from [<c009bfa8>] (do_execve+0x7c/0x2e4)
    [<c009bfa8>] (do_execve+0x7c/0x2e4) from [<c0026a80>] (kernel_execve+0x34/0x80)
    [<c0026a80>] (kernel_execve+0x34/0x80) from [<c004b514>] (____call_usermodehelper+0x130/0x148)
    [<c004b514>] (____call_usermodehelper+0x130/0x148) from [<c0024858>] (kernel_thread_exit+0x0/0x8)

   and the path pointer was NULL.  Good that ARM's kernel_execve()
   doesn't check the pointer for NULL or else I wouldn't notice it.

The only race there might be is with UMH_NO_WAIT but it is too late for
me to investigate it now.  UMH_WAIT_PROC could probably also use VFORK
and we could save one exec.  So the only race I see is with UMH_NO_WAIT
and recent scheduler changes where the child does not always run first
might have trigger here something but as I said, it is late....

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpumask: Move deprecated functions to end of header.

The new ones have pretty kerneldoc.  Move the old ones to the end to
avoid confusing people.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: benh@kernel.crashing.org

cpumask: remove unused deprecated functions, avoid accusations of insanity

We're not forcing removal of the old cpu_ functions, but we might as
well delete the now-unused ones.

Especially CPUMASK_ALLOC and friends.  I actually got a phone call (!)
from a hacker who thought I had introduced them as the new cpumask
API.  He seemed bewildered that I had lost all taste.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: benh@kernel.crashing.org

cpumask: use new-style cpumask ops in mm/quicklist.

This slipped past the previous sweeps.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Christoph Lameter <cl@linux-foundation.org>

cpumask: use mm_cpumask() wrapper: x86

Makes code futureproof against the impending change to mm->cpu_vm_mask (to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: use mm_cpumask() wrapper: um

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: use mm_cpumask() wrapper: mips

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: use mm_cpumask() wrapper: mn10300

Makes code futureproof against the impending change to mm->cpu_vm_mask
(to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Also change the actual arg name here to "mm" (which it is), not "task".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: use mm_cpumask() wrapper: m32r

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Hirokazu Takata <takata@linux-m32r.org> (fixes)

cpumask: use mm_cpumask() wrapper: arm

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: Use accessors for cpu_*_mask: um

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>

cpumask: Use accessors for cpu_*_mask: powerpc

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>

cpumask: Use accessors for cpu_*_mask: mips

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>

cpumask: Use accessors for cpu_*_mask: m32r

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>

cpumask: remove arch_send_call_function_ipi

Now everyone is converted to arch_send_call_function_ipi_mask, remove
the shim and the #defines.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: arch_send_call_function_ipi_mask: s390

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: arch_send_call_function_ipi_mask: powerpc

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: arch_send_call_function_ipi_mask: mips

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

We also take the chance to wean the implementations off the
obsolescent for_each_cpu_mask(): making send_ipi_mask take the pointer
seemed the most natural way to ensure all implementations used
for_each_cpu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: arch_send_call_function_ipi_mask: m32r

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

We also take the chance to wean the implementations off the
obsolescent for_each_cpu_mask(): making send_ipi_mask take the pointer
seemed the most natural way to ensure all implementations used
for_each_cpu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: arch_send_call_function_ipi_mask: alpha

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask().

We also take the chance to wean the send_ipi_message off the
obsolescent for_each_cpu_mask(): making it take a pointer seemed the
most natural way to do this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: powerpc

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: s390

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: sparc

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: core

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>