Tom Arbuckle [Wed, 11 Feb 2009 10:41:48 +0000 (10:41 +0000)]
powerpc/pci: Fix PCI<->OF matching of old style multifunc devices
Old OF variants used to create a 'dummy' parent node "multifunc-device"
for devices with more than one PCI function. Our code that matches OF
nodes to PCI devices dealt with that in one place but not in another,
this fixes it.
This has the practical effect of fixing interrupt routing of multifunction
PCI cards on some older PowerMac machines.
Signed-off-by: Tom Arbuckle <tom.d.arbuckle@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Kumar Gala [Tue, 10 Feb 2009 20:10:44 +0000 (20:10 +0000)]
powerpc: Unify opcode definitions and support
Create a new header that becomes a single location for defining PowerPC
opcodes used by code that is either generationg instructions
at runtime (fixups, debug, etc.), emulating instructions, or just
compiling instructions old assemblers don't know about.
We currently don't handle the floating point emulation or alignment decode
as both are better handled by the specific decode support they already
have.
Added support for the new dcbzl, dcbal, msgsnd, tlbilx, & wait instructions
since older assemblers don't know about them.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Fri, 13 Feb 2009 14:45:27 +0000 (06:45 -0800)]
powerpc, ftrace: use create_branch lib function
Impact: clean up, remove duplicate code
When ftrace was first ported to PowerPC, there existed a
create_function_call that would create the instruction to make a call
to a given address. Unfortunately, this call expected to write to
the address it was given, and since it used the address to calculate
the offset, it could not be faked.
ftrace needed a way to create the instruction without actually writing
that instruction to the text section. So ftrace had to implement its
own code.
Now we have create_branch in the code patching library, which does
exactly what ftrace needs. This patch replaces ftrace's implementation
with the library function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Fri, 13 Feb 2009 14:31:39 +0000 (06:31 -0800)]
powerpc, ftrace: use unsigned int for instruction manipulation
The original port of ftrace to PowerPC kept a lot of the code used
by x86. Some of this code was to handle x86's 5 byte instruction.
This was handled by using character arrays to manipulate the
code.
PowerPC has a consistent 4 byte instruction. Using unsigned ints
makes the code more efficient as well as more readable.
By converting to use unsigned ints to represent instructions,
I was able to remove the side effects that were needed for
manipulating character strings.
i.e. memcpy and memcmp
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Thu, 12 Feb 2009 01:06:43 +0000 (20:06 -0500)]
powerpc32, ftrace: dynamic function graph tracer
This patch gets function graph tracing working with dynamic function
tracer on PowerPC32.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Thu, 12 Feb 2009 00:10:57 +0000 (19:10 -0500)]
powerpc32, ftrace: port function graph tracer to ppc32, static only
This patch ports the function graph tracer for PowerPC, but only
for static function tracing.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Wed, 11 Feb 2009 20:01:18 +0000 (15:01 -0500)]
powerpc32, ftrace: save and restore mcount regs with macro
Impact: clean up
Use a macro to save and restore the registers for PowerPC32,
since that code is duplicated.
This is similar to the work done by Cyrill Gorcunov for the
mcount code in x86_64.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Wed, 11 Feb 2009 20:45:49 +0000 (12:45 -0800)]
powerpc64, ftrace: save toc only on modules for function graph
The TOCS used by modules are different than the one used by
the core kernel code. The function graph tracer must save and
restore the TOC whenever it traces a module call. But this
is an added overhead to burden the majority of core kernel
code being traced.
Benjamin Herrenschmidt suggested in testing the entry of
the call to tell if it is a core kernel function or a module.
He recommended using the REGION_ID() macro to perform this test.
This patch implements Benjamin's idea, and uses a different
return_to_handler routine dependent on if the entry is a core
kernel function or not. The module version saves the TOC, where as
the core kernel version does not.
Geoff Lavand tested on PS3.
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Wed, 11 Feb 2009 06:19:54 +0000 (22:19 -0800)]
powerpc64, tracing: add function graph tracer with dynamic tracing
This is the port of the function graph tracer to PowerPC with
dynamic tracing.
Geoff Lavand tested on PS3.
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Tue, 10 Feb 2009 05:10:27 +0000 (21:10 -0800)]
powerpc64: port of the function graph tracer
This is a port of the function graph tracer that was written by
Frederic Weisbecker for the x86.
This only works for PPC64 at the moment and only for static tracing.
PPC32 and dynamic function graph tracing support will come later.
The trace produces a visual calling of functions:
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) 2.224 us | }
0) ! 271.024 us | }
0) ! 320.080 us | }
0) ! 324.656 us | }
0) ! 329.136 us | }
0) | .put_prev_task_fair() {
0) | .update_curr() {
0) 2.240 us | .update_min_vruntime();
0) 6.512 us | }
0) 2.528 us | .__enqueue_entity();
0) + 15.536 us | }
0) | .pick_next_task_fair() {
0) 2.032 us | .__pick_next_entity();
0) 2.064 us | .__clear_buddies();
0) | .set_next_entity() {
0) 2.672 us | .__dequeue_entity();
0) 6.864 us | }
Geoff Lavand tested on PS3.
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Fri, 6 Feb 2009 05:33:09 +0000 (21:33 -0800)]
powerpc, ftrace: fix compile error when modules not configured
Michael Neuling reported a compile bug when dynamic ftrace was
configured in and modules were not. This was due to the ftrace
code referencing module specific structures.
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Thu, 5 Feb 2009 02:29:03 +0000 (18:29 -0800)]
ftrace, powerpc: replace debug macro with proper pr_deug
Impact: cleanup
The PowerPC ftrace code uses a hacked up DEBUGP macro for prints.
This patch converts it to the standard pr_debug.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Sun, 22 Feb 2009 23:47:23 +0000 (10:47 +1100)]
Merge commit 'ftrace/function-graph' into next
Steven Rostedt [Mon, 9 Feb 2009 18:54:03 +0000 (10:54 -0800)]
tracing/function-graph-tracer: make arch generic push pop functions
There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Benjamin Herrenschmidt [Wed, 18 Feb 2009 02:23:30 +0000 (13:23 +1100)]
Merge commit 'kumar/next' into next
Benjamin Herrenschmidt [Wed, 18 Feb 2009 02:19:25 +0000 (13:19 +1100)]
Merge commit 'origin/master' into next
Manual merge of:
arch/powerpc/include/asm/pgtable-ppc32.h
Zlatko Calusic [Wed, 18 Feb 2009 00:33:34 +0000 (01:33 +0100)]
Add support for VT6415 PCIE PATA IDE Host Controller
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 13 Feb 2009 22:41:12 +0000 (23:41 +0100)]
USB/PCI: Fix resume breakage of controllers behind cardbus bridges
If a USB PCI controller is behind a cardbus bridge, we are trying to
restore its configuration registers too early, before the cardbus
bridge is operational. To fix this, call pci_restore_state() from
usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is
no longer necessary (the configuration spaces of USB controllers that
are not behind cardbus bridges will be restored by the PCI PM core
with interrupts disabled anyway).
This patch fixes the regression from 2.6.28 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12659
[ Side note: the proper long-term fix is probably to just force the
unplug event at suspend time instead of doing a plug/unplug at resume
time, but this patch is fine regardless - Linus ]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 17 Feb 2009 22:30:06 +0000 (14:30 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: cpu hotplug fix
Linus Torvalds [Tue, 17 Feb 2009 22:29:42 +0000 (14:29 -0800)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: more consistently use clock vs timer
Linus Torvalds [Tue, 17 Feb 2009 22:29:15 +0000 (14:29 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
doc: mmiotrace.txt, buffer size control change
trace: mmiotrace to the tracer menu in Kconfig
mmiotrace: count events lost due to not recording
Linus Torvalds [Tue, 17 Feb 2009 22:27:39 +0000 (14:27 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vm86: fix preemption bug
x86, olpc: fix model detection without OFW
x86, hpet: fix for LS21 + HPET = boot hang
x86: CPA avoid repeated lazy mmu flush
x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context
x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption
x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem
x86/cpa: make sure cpa is safe to call in lazy mmu mode
x86, ptrace, mm: fix double-free on race
Linus Torvalds [Tue, 17 Feb 2009 22:26:35 +0000 (14:26 -0800)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
iommu: fix Intel IOMMU write-buffer flushing
futex: fix reference leak
Trivial conflicts fixed manually in drivers/pci/intel-iommu.c
Linus Torvalds [Tue, 17 Feb 2009 22:23:49 +0000 (14:23 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/vsx: Fix VSX alignment handler for regs 32-63
powerpc/ps3: Move ps3_mm_add_memory to device_initcall
powerpc/mm: Fix numa reserve bootmem page selection
powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
Linus Torvalds [Tue, 17 Feb 2009 22:23:35 +0000 (14:23 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Documentation: fix minor PCIe HOWTO thinko
PCI: fix missing kernel-doc and typos
PCI: fix struct pci_platform_pm_ops kernel-doc
PCI: fix rom.c kernel-doc warning
PCI/MSI: fix msi_mask() shift fix
Linus Torvalds [Tue, 17 Feb 2009 22:22:59 +0000 (14:22 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: lrw - Fix big endian support
Linus Torvalds [Tue, 17 Feb 2009 22:19:14 +0000 (14:19 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: hold trans_mutex when using btrfs_record_root_in_trans
Btrfs: make a lockdep class for the extent buffer locks
Btrfs: fs/btrfs/volumes.c: remove useless kzalloc
Btrfs: remove unused code in split_state()
Btrfs: remove btrfs_init_path
Btrfs: balance_level checks !child after access
Btrfs: Avoid using __GFP_HIGHMEM with slab allocator
Btrfs: don't clean old snapshots on sync(1)
Btrfs: use larger metadata clusters in ssd mode
Btrfs: process mount options on mount -o remount,
Btrfs: make sure all pending extent operations are complete
Linus Torvalds [Tue, 17 Feb 2009 22:16:02 +0000 (14:16 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
sata_nv: give up hardreset on nf2
libata-sff: fix 32-bit PIO ATAPI regression
Linus Torvalds [Tue, 17 Feb 2009 22:15:23 +0000 (14:15 -0800)]
Merge git://git./linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: create the source symlink earlier in the objdir
scripts: add x86 64 bit support to the markup_oops.pl script
scripts: add x86 register parser to markup_oops.pl
kbuild: add sys_* entries for syscalls in tags
kbuild: fix tags generation of config symbols
bootgraph: fix for use with dot symbols
kbuild: add vmlinux to kernel rpm
kbuild,setlocalversion: shorten the make time when using svn
Linus Torvalds [Tue, 17 Feb 2009 22:14:15 +0000 (14:14 -0800)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
MAINTAINERS: Switch hdaps to Frank Seidel
hwmon: Fix ACPI resource check error handling
hwmon: (f71882fg) Hide misleading error message
Linus Torvalds [Tue, 17 Feb 2009 22:09:03 +0000 (14:09 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
V4L/DVB (10626): ivtv: fix regression in get sliced vbi format
V4L/DVB (10625): ivtv: fix decoder crash regression
V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time.
V4L/DVB (10572): Revert commit
dda06a8e4610757def753ee3a541a0b1a1feb36b
V4L/DVB (10533): fix LED status output
V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication
V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup
V4L/DVB (10516a): zoran: Update MAINTAINERS entry
Linus Torvalds [Tue, 17 Feb 2009 22:08:26 +0000 (14:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: fix bus endianity in file2alias
HID: move tmff and zpff devices from ignore_list to blacklist
HID: unlock properly on error paths in hidraw_ioctl()
HID: blacklist Powercom USB UPS
Linus Torvalds [Tue, 17 Feb 2009 22:08:03 +0000 (14:08 -0800)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd
* 'for-linus' of git://git.o-hand.com/linux-mfd:
mfd: Fix sm501_register_gpio section mismatch
mfd: fix sm501 section mismatches
mfd: terminate pcf50633 i2c_device_id list
mfd: Ensure all WM8350 IRQs are masked at startup
mfd: fix htc-egpio iomem resource handling using resource_size
mfd: Fix TWL4030 build on some ARM variants
mfd: wm8350 tries reaches -1
mfd: Mark WM835x USB_SLV_500MA bit as accessible
mfd: Improve diagnostics for WM8350 ID register probe
mfd: Initialise WM8350 interrupts earlier
mfd: Fix egpio kzalloc return test
Linus Torvalds [Tue, 17 Feb 2009 22:07:18 +0000 (14:07 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] iTCO_wdt: fix SMI_EN regression 2
Linus Torvalds [Tue, 17 Feb 2009 22:05:59 +0000 (14:05 -0800)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:
wusb: whci-hcd: always lock whc->lock with interrupts disabled
Roel Kluin [Mon, 16 Feb 2009 12:49:16 +0000 (12:49 +0000)]
FRV: __pte_to_swp_entry doesn't expand correctly
The macro doesn't expand correctly when its parameter isn't 'pte'.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 17 Feb 2009 22:05:05 +0000 (14:05 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling
ext4: Implement range_cyclic in ext4_da_writepages instead of write_cache_pages
ext4: Initialize preallocation list_head's properly
ext4: Fix lockdep warning
ext4: Fix to read empty directory blocks correctly in 64k
jbd2: Avoid possible NULL dereference in jbd2_journal_begin_ordered_truncate()
Revert "ext4: wait on all pending commits in ext4_sync_fs()"
jbd2: Fix return value of jbd2_journal_start_commit()
Linus Torvalds [Tue, 17 Feb 2009 22:04:32 +0000 (14:04 -0800)]
Merge branch 'kvm-updates/2.6.29' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Flush volatile msrs before emulating rdmsr
KVM: Fix assigned devices circular locking dependency
KVM: x86: fix LAPIC pending count calculation
KVM: Fix INTx for device assignment
KVM: MMU: Map device MMIO as UC in EPT
KVM: x86: disable kvmclock on non constant TSC hosts
KVM: PIT: fix i8254 pending count read
KVM: Fix racy in kvm_free_assigned_irq
KVM: Add kvm_arch_sync_events to sync with asynchronize events
KVM: mmu_notifiers release method
KVM: Avoid using CONFIG_ in userspace visible headers
KVM: ia64: fix fp fault/trap handler
Linus Torvalds [Tue, 17 Feb 2009 22:04:00 +0000 (14:04 -0800)]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
cpumask: Use cpu_*_mask accessors code: alpha
cpumask: fix powernow-k8: partial revert of
2fdf66b491ac706657946442789ec644cc317e1a
David Woodhouse [Fri, 13 Feb 2009 23:18:03 +0000 (23:18 +0000)]
Fix Intel IOMMU write-buffer flushing
This is the cause of the DMA faults and disk corruption that people have
been seeing. Some chipsets neglect to report the RWBF "capability" --
the flag which says that we need to flush the chipset write-buffer when
changing the DMA page tables, to ensure that the change is visible to
the IOMMU.
Override that bit on the affected chipsets, and everything is happy
again.
Thanks to Chris and Bhavesh and others for helping to debug.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Mon, 16 Feb 2009 02:38:12 +0000 (02:38 +0000)]
Fix incomplete __mntput locking
Getting this wrong caused
WARNING: at fs/namespace.c:636 mntput_no_expire+0xac/0xf2()
due to optimistically checking cpu_writer->mnt outside the spinlock.
Here's what we really want:
* we know that nobody will set cpu_writer->mnt to mnt from now on
* all changes to that sucker are done under cpu_writer->lock
* we want the laziest equivalent of
spin_lock(&cpu_writer->lock);
if (likely(cpu_writer->mnt != mnt)) {
spin_unlock(&cpu_writer->lock);
continue;
}
/* do stuff */
that would make sure we won't miss earlier setting of ->mnt done by
another CPU.
Anyway, for now we just move the spin_lock() earlier and move the test
into the properly locked region.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-and-tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frank Seidel [Tue, 17 Feb 2009 18:59:54 +0000 (19:59 +0100)]
MAINTAINERS: Switch hdaps to Frank Seidel
As Rovert Love doesn't any more seem to be realy active on hdaps
driver i'll happily take it over.
Signed-off-by: Frank Seidel <frank@f-seidel.de>
Cc: Robert Love <rlove@rlove.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Tue, 17 Feb 2009 18:59:54 +0000 (19:59 +0100)]
hwmon: Fix ACPI resource check error handling
This patch fixes a number of cases where things were not properly
cleaned up when acpi_check_resource_conflict() returned an error,
causing oopses such as the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=483208
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Tue, 17 Feb 2009 18:59:54 +0000 (19:59 +0100)]
hwmon: (f71882fg) Hide misleading error message
If the F71882FG chip is at address 0x4e, then the probe at 0x2e will
fail with the following message in the logs:
f71882fg: Not a Fintek device
This is misleading because there is a Fintek device, just at a
different address. So I propose to degrade this message to a debug
message.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Mon, 16 Feb 2009 07:25:32 +0000 (04:25 -0300)]
V4L/DVB (10626): ivtv: fix regression in get sliced vbi format
The new v4l2_subdev_call used s_fmt instead of g_fmt.
Thanks-to: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 14 Feb 2009 22:58:33 +0000 (19:58 -0300)]
V4L/DVB (10625): ivtv: fix decoder crash regression
The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug
causing decoder commands to crash. The decoder commands should have been
handled from the video_ioctl2 default handler, ensuring correct mapping
of the argument between user and kernel space. Unfortunately they ended
up before the video_ioctl2 call, causing random crashes.
Thanks to hannes@linus.priv.at for testing and helping me track down the
cause!
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adam Baker [Wed, 4 Feb 2009 18:33:21 +0000 (15:33 -0300)]
V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time.
If a device using the gspca framework is unplugged while it is still streaming
then the call that is used to free the URBs that have been allocated occurs
after the pointer it uses becomes invalid at the end of gspca_disconnect.
Make another cleanup call in gspca_disconnect while the pointer is still
valid (multiple calls are OK as destroy_urbs checks for pointers already
being NULL.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 16 Feb 2009 18:27:44 +0000 (15:27 -0300)]
V4L/DVB (10572): Revert commit
dda06a8e4610757def753ee3a541a0b1a1feb36b
On Mon, 02 Feb 2009, Hartmut wrote:
This change set is wrong. The affected functions cannot be called from
an interrupt context, because they may process large buffers. In this
case, interrupts are disabled for a long time. Functions, like
dvb_dmx_swfilter_packets(), could be called only from a tasklet.
This change set does hide some strong design bugs in dm1105.c and
au0828-dvb.c.
Please revert this change set and do fix the bugs in dm1105.c and
au0828-dvb.c (and other files).
On Sun, 15 Feb 2009, Oliver Endriss wrote:
This changeset _must_ be reverted! It breaks all kernels since 2.6.27
for applications which use DVB and require a low interrupt latency.
It is a very bad idea to call the demuxer to process data buffers with
interrupts disabled!
On Mon, 16 Feb 2009, Trent Piepho wrote:
I agree, this is bad. The demuxer is far too much work to be done with
IRQs off. IMHO, even doing it under a spin-lock is excessive. It should
be a mutex. Drivers should use a work-queue to feed the demuxer.
Thank you for testing this changeset and discovering the issues on it.
Cc: Trent Piepho <xyzzy@speakeasy.org>
Cc: Hartmut <e9hack@googlemail.com>
Cc: Oliver Endriss <o.endriss@gmx.de>
Cc: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tobias Lorenz [Thu, 12 Feb 2009 17:56:19 +0000 (14:56 -0300)]
V4L/DVB (10533): fix LED status output
This patch closes one of my todos that was since long on my list.
Some people reported clicks and glitches in the audio stream,
correlated to the LED color changing cycle.
Thanks to Rick Bronson <rick@efn.org>.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tobias Lorenz [Thu, 12 Feb 2009 17:56:10 +0000 (14:56 -0300)]
V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication
Thanks to Bob Ross <pigiron@gmx.com>
- correction of stereo detection/setting
- correction of signal strength indicator scaling
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Feb 2009 11:24:34 +0000 (08:24 -0300)]
V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup
As reported by David Engel <david@istwok.net>, ATSC115 doesn't work
fine with mythtv. This software opens both analog and dvb interfaces of
saa7134.
What happens is that some tuner commands are going to the wrong place,
as shown at the logs:
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: using tuner params #0 (ntsc)
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808
Feb 12 20:37:48 opus kernel: tuner 1-0061: tv freq set to 67.25
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: using tuner params #0 (ntsc)
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: tv 0x07 0x10 0xce 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: tv 0x07 0x10 0xce 0x01
This happens due to a hack at TUV1236D analog setup, where it replaces
tuner address, at 0x61 for 0x0a, in order to save a few memory bytes.
The code assumes that nobody else would try to access the tuner during
that setup, but the point is that there's no lock to protect such
access. So, this opens the possibility of race conditions to happen.
Instead of hacking tuner address, this patch uses a temporary var with
the proper tuner value to be used during the setup. This should save
the issue, although we should consider to write some analog/digital
lock at saa7134 driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Sat, 24 Jan 2009 23:52:41 +0000 (20:52 -0300)]
V4L/DVB (10516a): zoran: Update MAINTAINERS entry
Ronald Bultje hasn't been maintaining the zoran driver for some time.
Re-direct people to the mailing lists and web pages.
MAINTAINERS | 6 +++---
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jiri Slaby [Tue, 17 Feb 2009 11:38:36 +0000 (12:38 +0100)]
HID: fix bus endianity in file2alias
Fix endianness of bus member of hid_device_id in modpost.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reported-by: Nye Liu <nyet@mrv.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Anssi Hannula [Sat, 14 Feb 2009 09:45:05 +0000 (11:45 +0200)]
HID: move tmff and zpff devices from ignore_list to blacklist
The devices handled by hid-tmff and hid-zpff were added in the
hid_ignore_list[] instead of hid_blacklist[] in hid-core.c, thus
disabling them completely.
hid_ignore_list[] causes hid layer to skip the device, while
hid_blacklist[] indicates there is a specific driver in hid bus.
Re-enable the devices by moving them to the correct list.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dan Carpenter [Tue, 3 Feb 2009 13:35:17 +0000 (16:35 +0300)]
HID: unlock properly on error paths in hidraw_ioctl()
We can't return immediately because lock_kernel() is held.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michael Tokarev [Sun, 1 Feb 2009 15:11:04 +0000 (16:11 +0100)]
HID: blacklist Powercom USB UPS
For quite some time users with various UPSes from Powercom were forced to play
magic with bind/unbind in /sys in order to be able to see the UPSes. The
beasts does not work as HID devices, even if claims to do so. cypress_m8
driver works with the devices instead, creating a normal serial port with which
normal UPS controlling software works.
The manufacturer confirmed the upcoming models with proper HID support will
have different device IDs. In any way, it's wrong to have two completely
different modules for one device in kernel.
Blacklist the device in HID (add it to hid_ignore_list) to stop this mess,
finally.
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Herbert Xu [Tue, 17 Feb 2009 12:00:11 +0000 (20:00 +0800)]
crypto: lrw - Fix big endian support
It turns out that LRW has never worked properly on big endian.
This was never discussed because nobody actually used it that
way. In fact, it was only discovered when Geert Uytterhoeven
loaded it through tcrypt which failed the test on it.
The fix is straightforward, on big endian the to find the nth
bit we should be grouping them by words instead of bytes. So
setbit128_bbe should xor with 128 - BITS_PER_LONG instead of
128 - BITS_PER_BYTE == 0x78.
Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rakib Mullick [Tue, 17 Feb 2009 08:21:52 +0000 (09:21 +0100)]
mfd: Fix sm501_register_gpio section mismatch
WARNING: drivers/mfd/built-in.o(.text+0x1706): Section mismatch in
reference from the function sm501_register_gpio() to the function
.devinit.text:sm501_gpio_register_chip()
The function sm501_register_gpio() references
the function __devinit sm501_gpio_register_chip().
This is often because sm501_register_gpio lacks a __devinit
annotation or the annotation of sm501_gpio_register_chip is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Alexey Dobriyan [Tue, 17 Feb 2009 08:10:19 +0000 (09:10 +0100)]
mfd: fix sm501 section mismatches
drv => driver renaming is needed otherwise modpost will spit false positives
re pointing to __devinit function from regular data.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Jean Delvare [Tue, 17 Feb 2009 08:07:02 +0000 (09:07 +0100)]
mfd: terminate pcf50633 i2c_device_id list
The i2c_device_id list is supposed to be zero-terminated.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Brown [Fri, 6 Feb 2009 14:28:15 +0000 (15:28 +0100)]
mfd: Ensure all WM8350 IRQs are masked at startup
The IRQs might have been left enabled in hardware, generating spurious
IRQs before the drivers have registered.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Philipp Zabel [Wed, 4 Feb 2009 20:27:48 +0000 (21:27 +0100)]
mfd: fix htc-egpio iomem resource handling using resource_size
Fixes an off-by-one error in the iomem resource mapping.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Mark Brown [Wed, 4 Feb 2009 20:26:07 +0000 (21:26 +0100)]
mfd: Fix TWL4030 build on some ARM variants
Many ARM platforms do not provide a mach/cpu.h so rather than guarding
the use of that header with CONFIG_ARM guard it with the guards used
when testing for the OMAP variants in the body of the code.
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Roel Kluin [Wed, 4 Feb 2009 20:23:22 +0000 (21:23 +0100)]
mfd: wm8350 tries reaches -1
With a postfix decrement tries will reach -1 rather than 0,
so the warning will not be issued even upon timeout.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Mark Brown [Wed, 4 Feb 2009 20:10:58 +0000 (21:10 +0100)]
mfd: Mark WM835x USB_SLV_500MA bit as accessible
The code is out of sync with the silicon.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Mark Brown [Wed, 4 Feb 2009 20:09:38 +0000 (21:09 +0100)]
mfd: Improve diagnostics for WM8350 ID register probe
Check the return value of the device I/O functions when reading the
ID registers so we can provide a more useful diagnostic when we're
having trouble talking to the device.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Mark Brown [Wed, 4 Feb 2009 19:49:52 +0000 (20:49 +0100)]
mfd: Initialise WM8350 interrupts earlier
Ensure that the interrupt handling is configured before we do platform
specific init. This allows the platform specific initialisation to
configure things which use interrupts safely.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Julia Lawall [Wed, 4 Feb 2009 19:44:01 +0000 (20:44 +0100)]
mfd: Fix egpio kzalloc return test
Since ei is already known to be non-NULL, I assume that what was intended
was to test the result of kzalloc.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Tejun Heo [Thu, 12 Feb 2009 01:34:32 +0000 (10:34 +0900)]
sata_nv: give up hardreset on nf2
Kernel bz#12176 reports that nf2 hardreset simply doesn't work. Give
up. Argh...
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockr@shaw.ca>
Reported-by: Saro <saro_v@hotmail.it>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Sergei Shtylyov [Sun, 15 Feb 2009 19:24:24 +0000 (23:24 +0400)]
libata-sff: fix 32-bit PIO ATAPI regression
Commit
871af1210f13966ab911ed2166e4ab2ce775b99d (libata: Add 32bit
PIO support) has caused all kinds of errors on the ATAPI devices, so
it has been empirically proven that one shouldn't try to read/write
an extra data word when a device is not expecting it already. "Don't
do it then"; however, still use a chance to do 32-bit read/write one
last time when there are exactly 3 trailing bytes.
Oh, and stop pointlessly swapping the bytes to and fro on big-endian
machines by using io*_rep() accessors which shouldn't byte-swap.
This patch should fix the kernel.org bug #12609.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
David Vrabel [Mon, 16 Feb 2009 14:37:12 +0000 (14:37 +0000)]
wusb: whci-hcd: always lock whc->lock with interrupts disabled
Always lock whc->lock with spin_lock_irq() or spin_lock_irqsave().
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Rusty Russell [Mon, 16 Feb 2009 23:31:59 +0000 (17:31 -0600)]
cpumask: Use cpu_*_mask accessors code: alpha
Impact: use new API, fix SMP bug.
Use the new accessors rather than frobbing bits directly.
This also removes the bug introduced in
ee0c468b (alpha: compile
fixes) which had Alpha setting bits on an on-stack cpumask, not the
cpu_online_map.
Cc: Richard Henderson <rth@twiddle.net>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Mon, 16 Feb 2009 23:31:58 +0000 (17:31 -0600)]
cpumask: fix powernow-k8: partial revert of
2fdf66b491ac706657946442789ec644cc317e1a
Impact: fix powernow-k8 when acpi=off (or other error).
There was a spurious change introduced into powernow-k8 in this patch:
so that we try to "restore" the cpus_allowed we never saved. We revert
that file.
See lkml "[PATCH] x86/powernow: fix cpus_allowed brokage when
acpi=off" from Yinghai for the bug report.
Cc: Mike Travis <travis@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Dan Carpenter [Mon, 16 Feb 2009 01:02:19 +0000 (20:02 -0500)]
ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling
This was found through a code checker (http://repo.or.cz/w/smatch.git/).
It looks like you might be able to trigger the error by trying to migrate
a readonly file system.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pekka Paalanen [Sat, 3 Jan 2009 19:09:27 +0000 (21:09 +0200)]
doc: mmiotrace.txt, buffer size control change
Impact: prevents confusing the user when buffer size is inadequate
The tracing framework offers a resizeable buffer, which mmiotrace uses
to record events. If the buffer is full, the following events will be
lost. Events should not be lost, so the documentation instructs the user
to increase the buffer size. The buffer size is set via a debugfs file.
Mmiotrace documentation was not updated the same time the debugfs file
was changed. The old file was tracing/trace_entries and first contained
the number of entries the buffer had space for, per cpu. Nowadays this
file is replaced with the file tracing/buffer_size_kb, which tells the
amount of memory reserved for the buffer, per cpu, in kilobytes.
Previously, a flag had to be toggled via the debugfs file
tracing/tracing_enabled when the buffer size was changed. This is no
longer necessary.
The mmiotrace documentation is updated to reflect the current state of
the tracing framework.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pekka Paalanen [Sat, 3 Jan 2009 19:23:51 +0000 (21:23 +0200)]
trace: mmiotrace to the tracer menu in Kconfig
Impact: cosmetic change in Kconfig menu layout
This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.
CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable
directly under the Kernel hacking / debugging menu in the kernel
configuration system. They were present only for x86 and x86_64.
Other tracers that use the ftrace tracing framework are in their own
sub-menu. This patch moves the mmiotrace configuration options there.
Since the Kconfig file, where the tracer menu is, is not architecture
specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by
x86/x86_64. CONFIG_MMIOTRACE now depends on it.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pekka Paalanen [Tue, 6 Jan 2009 11:57:11 +0000 (13:57 +0200)]
mmiotrace: count events lost due to not recording
Impact: enhances lost events counting in mmiotrace
The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andi Kleen [Sat, 10 Jan 2009 03:56:13 +0000 (04:56 +0100)]
kbuild: create the source symlink earlier in the objdir
It's useful to already have the source symlink in a
objdir when one just runs make *config. Then one
can do
mkdir obj-allyes
cd obj-allyes
make -C ../sourcedir O=$(pwd) allyesconfig
./source/scripts/config --disable debug_info
make CC=icecc -j18
without having to interrupt the make first just to
get the source symlink.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[sam: deleted the other source symlink statement]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Arjan van de Ven [Sun, 15 Feb 2009 10:30:55 +0000 (11:30 +0100)]
scripts: add x86 64 bit support to the markup_oops.pl script
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Arjan van de Ven [Sun, 15 Feb 2009 10:30:52 +0000 (11:30 +0100)]
scripts: add x86 register parser to markup_oops.pl
An oops dump also contains the register values.
This patch parses these for (32 bit) x86, and then annotates the
disassembly with these values; this helps in analysis of the oops by the
developer, for example, NULL pointer or other pointer bugs show up clearly
this way.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rabin Vincent [Sun, 25 Jan 2009 13:09:12 +0000 (18:39 +0530)]
kbuild: add sys_* entries for syscalls in tags
Currently, it is no longer possible to use the tags file to jump to
system call function definitions with sys_foo, because the definitions
are obscured by use of the SYSCALL_DEFINE* macros.
This patch adds the appropriate option to ctags to make it see through
the macro. Also, it adds the ENTRY() work already done for Exuberant
to Emacs too.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Alexey Dobriyan [Wed, 11 Feb 2009 21:24:09 +0000 (13:24 -0800)]
kbuild: fix tags generation of config symbols
commit
4f628248a578585472e19e4cba2c604643af8c6c aka "kbuild: reintroduce
ALLSOURCE_ARCHS support for tags/cscope" breaks tags generation for
Kconfig symbols.
Steps to reproduce:
make tags
vi -t PROC_FS
It should jump to 'config PROC_FS' line.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Michael Neuling [Sun, 15 Feb 2009 09:20:30 +0000 (10:20 +0100)]
bootgraph: fix for use with dot symbols
powerpc has dot symbols, so the dmesg output looks like:
<4>[ 0.327310] calling .migration_init+0x0/0x9c @ 1
<4>[ 0.327595] initcall .migration_init+0x0/0x9c returned 1 after 0 usecs
The below fixes bootgraph.pl so it handles this correctly.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Josh Hunt [Thu, 12 Feb 2009 05:10:57 +0000 (21:10 -0800)]
kbuild: add vmlinux to kernel rpm
We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept. We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.
This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Mike Frysinger [Thu, 5 Feb 2009 08:13:32 +0000 (16:13 +0800)]
kbuild,setlocalversion: shorten the make time when using svn
Don't bother doing `svn st` as it takes a retarded amount of time when
the source is cold
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Thomas Gleixner [Tue, 13 Jan 2009 22:36:34 +0000 (23:36 +0100)]
x86, vm86: fix preemption bug
Commit
3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge
do_debug handlers") changed the preemption disable logic of do_debug()
so vm86_handle_trap() is called with preemption disabled resulting in:
BUG: sleeping function called from invalid context at include/linux/kernel.h:155
in_atomic(): 1, irqs_disabled(): 0, pid: 3005, name: dosemu.bin
Pid: 3005, comm: dosemu.bin Tainted: G W 2.6.29-rc1 #51
Call Trace:
[<
c050d669>] copy_to_user+0x33/0x108
[<
c04181f4>] save_v86_state+0x65/0x149
[<
c0418531>] handle_vm86_trap+0x20/0x8f
[<
c064e345>] do_debug+0x15b/0x1a4
[<
c064df1f>] debug_stack_correct+0x27/0x2c
[<
c040365b>] sysenter_do_call+0x12/0x2f
BUG: scheduling while atomic: dosemu.bin/3005/0x10000001
Restore the original calling convention and reenable preemption before
calling handle_vm86_trap().
Reported-by: Michal Suchanek <hramrach@centrum.cz>
Cc: stable@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avi Kivity [Sun, 15 Feb 2009 00:32:07 +0000 (02:32 +0200)]
KVM: VMX: Flush volatile msrs before emulating rdmsr
Some msrs (notable MSR_KERNEL_GS_BASE) are held in the processor registers
and need to be flushed to the vcpu struture before they can be read.
This fixes cygwin longjmp() failure on Windows x64.
Signed-off-by: Avi Kivity <avi@redhat.com>
Mark McLoughlin [Thu, 5 Feb 2009 18:23:46 +0000 (18:23 +0000)]
KVM: Fix assigned devices circular locking dependency
kvm->slots_lock is outer to kvm->lock, so take slots_lock
in kvm_vm_ioctl_assign_device() before taking kvm->lock,
rather than taking it in kvm_iommu_map_memslots().
Cc: stable@kernel.org
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Marcelo Tosatti [Tue, 10 Feb 2009 22:41:41 +0000 (20:41 -0200)]
KVM: x86: fix LAPIC pending count calculation
Simplify LAPIC TMCCT calculation by using hrtimer provided
function to query remaining time until expiration.
Fixes host hang with nested ESX.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sheng Yang [Tue, 6 Jan 2009 08:25:10 +0000 (16:25 +0800)]
KVM: Fix INTx for device assignment
Missing buckets and wrong parameter for free_irq()
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sheng Yang [Wed, 21 Jan 2009 08:52:16 +0000 (16:52 +0800)]
KVM: MMU: Map device MMIO as UC in EPT
Software are not allow to access device MMIO using cacheable memory type, the
patch limit MMIO region with UC and WC(guest can select WC using PAT and
PCD/PWT).
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Marcelo Tosatti [Tue, 10 Feb 2009 22:59:45 +0000 (20:59 -0200)]
KVM: x86: disable kvmclock on non constant TSC hosts
This is better.
Currently, this code path is posing us big troubles,
and we won't have a decent patch in time. So, temporarily
disable it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Marcelo Tosatti [Tue, 30 Dec 2008 17:55:05 +0000 (15:55 -0200)]
KVM: PIT: fix i8254 pending count read
count_load_time assignment is bogus: its supposed to contain what it
means, not the expiration time.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sheng Yang [Tue, 6 Jan 2009 02:03:03 +0000 (10:03 +0800)]
KVM: Fix racy in kvm_free_assigned_irq
In the past, kvm_get_kvm() and kvm_put_kvm() was called in assigned device irq
handler and interrupt_work, in order to prevent cancel_work_sync() in
kvm_free_assigned_irq got a illegal state when waiting for interrupt_work done.
But it's tricky and still got two problems:
1. A bug ignored two conditions that cancel_work_sync() would return true result
in a additional kvm_put_kvm().
2. If interrupt type is MSI, we would got a window between cancel_work_sync()
and free_irq(), which interrupt would be injected again...
This patch discard the reference count used for irq handler and interrupt_work,
and ensure the legal state by moving the free function at the very beginning of
kvm_destroy_vm(). And the patch fix the second bug by disable irq before
cancel_work_sync(), which may result in nested disable of irq but OK for we are
going to free it.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sheng Yang [Tue, 6 Jan 2009 02:03:02 +0000 (10:03 +0800)]
KVM: Add kvm_arch_sync_events to sync with asynchronize events
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.
For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Marcelo Tosatti [Wed, 10 Dec 2008 20:23:26 +0000 (21:23 +0100)]
KVM: mmu_notifiers release method
The destructor for huge pages uses the backing inode for adjusting
hugetlbfs accounting.
Hugepage mappings are destroyed by exit_mmap, after
mmu_notifier_release, so there are no notifications through
unmap_hugepage_range at this point.
The hugetlbfs inode can be freed with pages backed by it referenced
by the shadow. When the shadow releases its reference, the huge page
destructor will access a now freed inode.
Implement the release operation for kvm mmu notifiers to release page
refs before the hugetlbfs inode is gone.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Mon, 19 Jan 2009 12:57:52 +0000 (14:57 +0200)]
KVM: Avoid using CONFIG_ in userspace visible headers
Kconfig symbols are not available in userspace, and are not stripped by
headers-install. Avoid their use by adding #defines in <asm/kvm.h> to
suit each architecture.
Signed-off-by: Avi Kivity <avi@redhat.com>
Yang Zhang [Thu, 8 Jan 2009 07:13:31 +0000 (15:13 +0800)]
KVM: ia64: fix fp fault/trap handler
The floating-point registers f6-f11 is used by vmm and
saved in kvm-pt-regs, so should set the correct bit mask
and the pointer in fp_state, otherwise, fpswa may touch
vmm's fp registers instead of guests'.
In addition, for fp trap handling, since the instruction
which leads to fp trap is completely executed, so can't
use retry machanism to re-execute it, because it may
pollute some registers.
Signed-off-by: Yang Zhang <yang.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Chris Ball [Sat, 14 Feb 2009 01:56:18 +0000 (20:56 -0500)]
x86, olpc: fix model detection without OFW
Impact: fix "garbled display, laptop is unusable" bug
Commit
e51a1ac2dfca9ad869471e88f828281db7e810c0 ("x86, olpc: fix endian
bug in openfirmware workaround") breaks model comparison on OLPC; the value
0xc2 needs to be scaled up by olpc_board().
The pre-patch version was wrong, but accidentally worked anyway
(big-endian 0xc2 is big enough to satisfy all other board revisions,
but little endian 0xc2 is not).
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Woodhouse [Fri, 13 Feb 2009 23:18:03 +0000 (23:18 +0000)]
iommu: fix Intel IOMMU write-buffer flushing
This is the cause of the DMA faults and disk corruption that people have
been seeing. Some chipsets neglect to report the RWBF "capability" --
the flag which says that we need to flush the chipset write-buffer when
changing the DMA page tables, to ensure that the change is visible to
the IOMMU.
Override that bit on the affected chipsets, and everything is happy
again.
Thanks to Chris and Bhavesh and others for helping to debug.
Should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=479996
http://bugzilla.kernel.org/show_bug.cgi?id=12578
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-and-acked-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log