GitHub/mt8127/android_kernel_alcatel_ttab.git
18 years ago[PATCH] W1: u64 is not long long
Andrew Morton [Sat, 14 Jan 2006 08:05:59 +0000 (00:05 -0800)]
[PATCH] W1: u64 is not long long

You don't know what type a u64 is, hence you cannot print it without a cast.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] W1: Remove incorrect MODULE_ALIAS
Patrick McHardy [Sat, 7 Jan 2006 23:44:15 +0000 (00:44 +0100)]
[PATCH] W1: Remove incorrect MODULE_ALIAS

The w1 netlink socket is created by a hardware specific driver calling
w1_add_master_device, so there is no point in including a module alias
for netlink autoloading in the core.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] fix W1_MASTER_DS9490_BRIDGE dependencies
Adrian Bunk [Fri, 6 Jan 2006 17:41:01 +0000 (18:41 +0100)]
[PATCH] fix W1_MASTER_DS9490_BRIDGE dependencies

W1_DS9490 was renamed to W1_MASTER_DS9490, but the entry in the
dependencies of W1_MASTER_DS9490_BRIDGE was forgotten.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] w1: misc cleanups
Adrian Bunk [Tue, 13 Dec 2005 22:04:33 +0000 (14:04 -0800)]
[PATCH] w1: misc cleanups

This patch contains the following cleanups:
- make needlessly global code static
- declarations for global code belong into header files
- w1.c: #if 0 the unused struct w1_slave_device

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] W1: Add the DS2482 I2C-to-w1 bridge driver.
Evgeniy Polyakov [Tue, 6 Dec 2005 10:38:28 +0000 (13:38 +0300)]
[PATCH] W1: Add the DS2482 I2C-to-w1 bridge driver.

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] W1: Move w1 bus master code into 'w1/masters' and move w1 slave code into...
Evgeniy Polyakov [Tue, 6 Dec 2005 10:38:28 +0000 (13:38 +0300)]
[PATCH] W1: Move w1 bus master code into 'w1/masters' and move w1 slave code into 'w1/slaves'

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] W1: Change the type 'unsigned long' member of 'struct w1_bus_master' to ...
Evgeniy Polyakov [Tue, 6 Dec 2005 10:38:27 +0000 (13:38 +0300)]
[PATCH] W1: Change the type 'unsigned long' member of 'struct w1_bus_master' to 'void *'.

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6
Linus Torvalds [Fri, 24 Mar 2006 00:26:56 +0000 (16:26 -0800)]
Merge git://git./linux/kernel/git/aia21/ntfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6:
  NTFS: 2.1.27 - Various bug fixes and cleanups.
  NTFS: Semaphore to mutex conversion.
  NTFS: Handle the recently introduced -ENAMETOOLONG return value from
  NTFS: Add a missing call to flush_dcache_mft_record_page() in
  NTFS: Fix a bug in fs/ntfs/inode.c::ntfs_read_locked_index_inode() where we
  NTFS: Improve comments on file attribute flags in fs/ntfs/layout.h.
  NTFS: Limit name length in fs/ntfs/unistr.c::ntfs_nlstoucs() to maximum
  NTFS: Remove all the make_bad_inode() calls.  This should only be called
  NTFS: Add support for sparse files which have a compression unit of 0.
  NTFS: Fix comparison of $MFT and $MFTMirr to not bail out when there are
  NTFS: Use buffer_migrate_page() for the ->migratepage function of all ntfs
  NTFS: Fix a buggette in an "should be impossible" case handling where we
  NTFS: Fix an (innocent) off-by-one error in the runlist code.
  NTFS: Fix two compiler warnings on Alpha.  Thanks to Andrew Morton for

18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Fri, 24 Mar 2006 00:25:49 +0000 (16:25 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (45 commits)
  [PATCH] Restore channel setting after scan.
  [PATCH] hostap: Fix memory leak on PCI probe error path
  [PATCH] hostap: Remove dead code (duplicated idx != 0)
  [PATCH] hostap: Fix unlikely read overrun in CIS parsing
  [PATCH] hostap: Fix double free in prism2_config() error path
  [PATCH] hostap: Fix ap_add_sta() return value verification
  [PATCH] hostap: Fix hw reset after CMDCODE_ACCESS_WRITE timeout
  [PATCH] wireless/airo: cache wireless scans
  [PATCH] wireless/airo: define default MTU
  [PATCH] wireless/airo: clean up printk usage to print device name
  [PATCH] WE-20 for kernel 2.6.16
  [PATCH] softmac: remove function_enter()
  [PATCH] skge: version 1.5
  [PATCH] skge: compute available ring buffers
  [PATCH] skge: dont free skb until multi-part transmit complete
  [PATCH] skge: multicast statistics fix
  [PATCH] skge: rx_reuse called twice
  [PATCH] skge: dont use dev_alloc_skb for rx buffs
  [PATCH] skge: align receive buffers
  [PATCH] sky2: dont need to use dev_kfree_skb_any
  ...

18 years agoMerge branch 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Fri, 24 Mar 2006 00:24:24 +0000 (16:24 -0800)]
Merge branch 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block

* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
  [PATCH] relay: consolidate sendfile() and read() code
  [PATCH] relay: add sendfile() support
  [PATCH] relay: migrate from relayfs to a generic relay API

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Fri, 24 Mar 2006 00:23:20 +0000 (16:23 -0800)]
Merge /pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (3568k): zoran: Use i2c_master_send when possible
  V4L/DVB (3568j): adv7175: Drop unused encoder dump command
  V4L/DVB (3568i): adv7175: Drop unused register cache
  V4L/DVB (3568h): cpia: correct email address
  V4L/DVB (3568g): sem2mutex: zoran
  V4L/DVB (3568f): saa7110: Fix array overrun
  V4L/DVB (3568e): bt856: Spare memory
  V4L/DVB (3568d): saa7111.c fix
  V4L/DVB (3568c): zoran: Init cleanups
  V4L/DVB (3568b): saa7111: Prevent array overrun
  V4L/DVB (3568a): saa7114: Fix i2c block write

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Thu, 23 Mar 2006 23:51:32 +0000 (15:51 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits)
  [PATCH] hwmon: add required idr locking
  [PATCH] I2C: hwmon: Rename register parameters
  [PATCH] I2C: Drop unneeded i2c-dev.h includes
  [PATCH] I2C: i2c-ixp4xx: Add hwmon class
  [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
  [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization
  [PATCH] I2C: i2c-ali1535: Drop redundant mutex
  [PATCH] i2c: Cleanup isp1301_omap
  [PATCH] i2c: Fix i2c-ite name initialization
  [PATCH] i2c: Drop the i2c-frodo bus driver
  [PATCH] i2c: Optimize core_lists mutex usage
  [PATCH] w83781d: Don't reset the chip by default
  [PATCH] w83781d: Document the alarm and beep bits
  [PATCH] w83627ehf: Refactor the sysfs interface
  [PATCH] hwmon: Support the Pentium M VID code
  [PATCH] hwmon: Add support for the Winbond W83687THF
  [PATCH] hwmon: f71805f semaphore to mutex conversions
  [PATCH] hwmon: Semaphore to mutex conversions
  [PATCH] i2c: Semaphore to mutex conversions, part 3
  [PATCH] i2c: Semaphore to mutex conversions, part 2
  ...

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Thu, 23 Mar 2006 23:49:57 +0000 (15:49 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (49 commits)
  [PATCH] acpiphp: fix acpi_path_name
  [PATCH] ibmphp: remove TRUE and FALSE
  [PATCH] PCI Hotplug: add common acpi functions to core
  [PATCH] PCI: kzalloc() conversion in drivers/pci
  [PATCH] acpiphp: Scan slots under the nested P2P bridge
  [PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB
  [PATCH] shpchp: cleanup bus speed handling
  [PATCH] PCI: fix pci_request_region[s] arg
  [PATCH] PCI: Provide a boot parameter to disable MSI
  [PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC
  [PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code
  [PATCH] acpiphp: fix bridge handle
  [PATCH] acpiphp - slot management fix - V4
  [PATCH] acpi: remove dock event handling from ibm_acpi
  [PATCH] acpiphp: add dock event handling
  [PATCH] acpi: export acpi_bus_trim
  [PATCH] acpiphp: add new bus to acpi
  [PATCH] PCI: Move pci_dev_put outside a spinlock
  [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix
  [PATCH] PCI: fix problems with MSI-X on ia64
  ...

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 23 Mar 2006 23:29:27 +0000 (15:29 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Update driver version and reldate.
  [TG3]: Add 5755 nvram support
  [TG3]: Add 5755 support
  [IPV6]: ip6_xmit: remove unnecessary NULL ptr check
  [NET_SCHED]: cls_u32: remove unnecessary NULL-ptr check
  [IPV4]: Add fib rule netlink notifications
  [BNX2]: Update version and reldate
  [BNX2]: Separate tx producer and consumer fields
  [BNX2]: Move .h files to bnx2.c
  [BNX2]: Combine small mem allocations
  [BNX2]: Fix link change handling
  [PKTGEN]: Add MPLS extension.

18 years agoMerge git://oss.sgi.com:8090/oss/git/xfs-2.6
Linus Torvalds [Thu, 23 Mar 2006 23:28:51 +0000 (15:28 -0800)]
Merge git://oss.sgi.com:8090/oss/git/xfs-2.6

* git://oss.sgi.com:8090/oss/git/xfs-2.6: (71 commits)
  [XFS] Sync up one/two other minor changes missed in previous merges.
  [XFS] Reenable the noikeep (delete inode cluster space) option by default.
  [XFS] Check that a page has dirty buffers before finding it acceptable for
  [XFS] Fixup naming inconsistencies found by Pekka Enberg and one from Jan
  [XFS] Explain the race closed by the addition of vn_iowait() to the start
  [XFS] Fixing the error caused by the conflict between DIO Write's
  [XFS] Fixing KDB's xrwtrc command, also added the current process id into
  [XFS] Fix compiler warning from xfs_file_compat_invis_ioctl prototype.
  [XFS] remove bogus INT_GET for u8 variables in xfs_dir_leaf.c
  [XFS] endianess annotations for xfs_da_node_hdr_t
  [XFS] endianess annotations for xfs_da_node_entry_t
  [XFS] store xfs_attr_inactive_list_t in native endian
  [XFS] store xfs_attr_sf_sort in native endian
  [XFS] endianess annotations for xfs_attr_shortform_t
  [XFS] endianess annotations for xfs_attr_leaf_name_remote_t
  [XFS] endianess annotations for xfs_attr_leaf_name_local_t
  [XFS] endianess annotations for xfs_attr_leaf_entry_t
  [XFS] endianess annotations for xfs_attr_leaf_hdr_t
  [XFS] remove bogus INT_GET on u8 variables in xfs_dir2_block.c
  [XFS] endianess annotations for xfs_da_blkinfo_t
  ...

18 years ago[PATCH] acpiphp: fix acpi_path_name
MUNEDA Takahiro [Fri, 17 Mar 2006 00:18:39 +0000 (09:18 +0900)]
[PATCH] acpiphp: fix acpi_path_name

I encountered the problem that the insmod of the acpiphp
fails because of the mis-freeing of the memory.

I tested this patch on my tiger4 box.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] ibmphp: remove TRUE and FALSE
Kristen Accardi [Wed, 15 Mar 2006 00:24:47 +0000 (16:24 -0800)]
[PATCH] ibmphp: remove TRUE and FALSE

This patch removes the defines TRUE and FALSE and just uses 0 or 1.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI Hotplug: add common acpi functions to core
Kristen Accardi [Fri, 3 Mar 2006 18:16:05 +0000 (10:16 -0800)]
[PATCH] PCI Hotplug: add common acpi functions to core

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.  In addition,
there are functions in both these files that are also in acpiphp_glue.c.
This patch will remove duplicate functions from shpchp, pciehp, and
acpiphp and move this functionality to pci_hotplug, as it is not
hardware specific.  Get rid of shpchprm* and pciehprm* files since they
are no longer needed.  shpchprm_nonacpi.c and pciehprm_nonacpi.c are
identical, as well as shpchprm_legacy.c and can be replaced with a
macro.

This patch also changes acpiphp to use the common hpp code.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: kzalloc() conversion in drivers/pci
Eric Sesterhenn [Tue, 28 Feb 2006 14:34:49 +0000 (15:34 +0100)]
[PATCH] PCI: kzalloc() conversion in drivers/pci

this patch converts drivers/pci to kzalloc usage.
Compile tested with allyes config.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpiphp: Scan slots under the nested P2P bridge
Kenji Kaneshige [Mon, 27 Feb 2006 13:15:49 +0000 (22:15 +0900)]
[PATCH] acpiphp: Scan slots under the nested P2P bridge

Current ACPIPHP driver scans only slots under the top level PCI-to-PCI
bridge. So hotplug PCI slots under the nested PCI-to-PCI bridge would
not be detected. For example, if the system has the ACPI namespace
like below, hotplug slots woule not be detected.

Device (PCI0) { /* Root bridge */
Name (_HID, "PNP0A03")
Device (P2PA) { /* PCI-to-PCI bridge */
Name (_ADR, ...)
Device (P2PB) { /* PCI-to-PCI bridge */
Name (_ADR, ...)
Device (S0F0) { /* hotplug slot */
Name (_ADR, ...)
Name (_SUN, ...)
Method (_EJ0, ...) { ... }
}
...
Device (S0F7) { /* hotplug slot */
Name (_ADR, ...)
Name (_SUN, ...)
Method (_EJ0, ...) { ... }
}
Device (S1F0) { /* hotplug slot */
Name (_ADR, ...)
Name (_SUN, ...)
Method (_EJ0, ...) { ... }
}
...
}
}
}

This patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB
John Keller [Wed, 8 Mar 2006 19:21:34 +0000 (13:21 -0600)]
[PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB

When doing a hotplug removal of a PPB, sn_bus_store_sysdata()
needs to be called for the PPB and all of its children.

Acked-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp: cleanup bus speed handling
Kenji Kaneshige [Wed, 1 Mar 2006 05:55:11 +0000 (14:55 +0900)]
[PATCH] shpchp: cleanup bus speed handling

The code related to handling bus speed in SHPCHP driver is
unnecessarily complex. This patch cleans up and simplify that.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: fix pci_request_region[s] arg
Jeff Garzik [Sun, 5 Mar 2006 02:52:42 +0000 (21:52 -0500)]
[PATCH] PCI: fix pci_request_region[s] arg

    Add missing 'const' to pci_request_region[s] 'res_name' arg,
    since we pass it directly to __request_region(), whose 'name' arg
    is also const.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Provide a boot parameter to disable MSI
Matthew Wilcox [Mon, 6 Mar 2006 05:33:34 +0000 (22:33 -0700)]
[PATCH] PCI: Provide a boot parameter to disable MSI

Several drivers are starting to grow options to disable MSI.  However,
it's often a host chipset issue, not something which individual drivers
should handle.  So we add the pci=nomsi kernel parameter to allow the user
to disable MSI modes for systems we haven't added to the quirk list yet.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC
Adrian Bunk [Sun, 5 Mar 2006 15:49:48 +0000 (16:49 +0100)]
[PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC

This patch contains the scheduled removal of PCI_LEGACY_PROC.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code
Adrian Bunk [Sun, 26 Feb 2006 21:16:51 +0000 (22:16 +0100)]
[PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code

The Coverity checker correctly noted, that in function board_replaced in
drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the
value 8, and therefore much code after the

...
                        if (rc || src) {
...
                                if (rc)
                                        return rc;
                                else
                                        return 1;
                        }
...

can never be called.

This patch removes the unreachable code in this function fixing kernel
Bugzilla #6073.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpiphp: fix bridge handle
MUNEDA Takahiro [Fri, 24 Feb 2006 08:46:04 +0000 (17:46 +0900)]
[PATCH] acpiphp: fix bridge handle

When hotplug slot is under the host bridge,
DEVICE_ACPI_HANDLE(&bus->self->dev) fails since '&bus->self' was not set.
This patch fixes it.

This patch is based on kristen's latest patches.
I tested this patch on my Tiger4.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpiphp - slot management fix - V4
MUNEDA Takahiro [Fri, 24 Feb 2006 01:56:08 +0000 (17:56 -0800)]
[PATCH] acpiphp - slot management fix - V4

o This patch removes IDs (for slots management).
o This patch removes the slot register/unregister processes
  from the init/exit phases. Instead, adds these processes
  in the bridge add/cleanup phases.
o Currently, this change doesn't have any meanings. But
  these changes are needed to support p2p bridge(with
  hotplug slot)

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpi: remove dock event handling from ibm_acpi
Kristen Accardi [Fri, 24 Feb 2006 01:56:06 +0000 (17:56 -0800)]
[PATCH] acpi: remove dock event handling from ibm_acpi

Remove dock station support from ibm_acpi by default.  This support has
been put into acpiphp instead.  Allow ibm_acpi to continue to provide
docking station support via config option for laptops/docking stations
that are not supported by acpiphp.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpiphp: add dock event handling
Kristen Accardi [Fri, 24 Feb 2006 01:56:03 +0000 (17:56 -0800)]
[PATCH] acpiphp: add dock event handling

These patches add generic dock event handling to acpiphp.  If there are
pci devices that need to be inserted/removed after the dock event, the
event notification will be handed down to the normal pci hotplug event
handler in acpiphp so that new bridges/devices can be enumerated.

Because some dock stations do not have pci bridges or pci devices that
need to be inserted after a dock, acpiphp will remain loaded to handle
dock events even if no hotpluggable pci slots are discovered.

You probably need to have the pci=assign-busses kernel parameter enabled
to use these patches, and you may not allow ibm_acpi to handle docking
notifications and use this patch.

This patch incorporates feedback provided by many.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpi: export acpi_bus_trim
Kristen Accardi [Fri, 24 Feb 2006 01:56:01 +0000 (17:56 -0800)]
[PATCH] acpi: export acpi_bus_trim

Export the acpi_bus_trim function so that the pci hotplug driver can
use it.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] acpiphp: add new bus to acpi
Kristen Accardi [Fri, 24 Feb 2006 01:55:58 +0000 (17:55 -0800)]
[PATCH] acpiphp: add new bus to acpi

If we add a new bridge with subordinate busses, we should call make sure
that acpi is notified so that the PRT (if present) can be read and drivers
who have registered on this bus will be notified when it is started.
Also make sure to use the max reserved bus number for the starting the bus
scan.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Move pci_dev_put outside a spinlock
Alan Stern [Thu, 23 Feb 2006 22:12:51 +0000 (17:12 -0500)]
[PATCH] PCI: Move pci_dev_put outside a spinlock

This patch (as659) fixes a might_sleep problem in the PCI core, by moving
a call to pci_dev_put() outside the scope of a spinlock.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix
Bernhard Kaindl [Sat, 18 Feb 2006 09:36:55 +0000 (01:36 -0800)]
[PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix

"In some cases, especially on modern laptops with a lot of PCI and cardbus
bridges, we're unable to assign correct secondary/subordinate bus numbers
to all cardbus bridges due to BIOS limitations unless we are using
"pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment)

Without it, Cardbus cards inserted are never seen by PCI because the parent
PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI
configuration cycles correctly and the system will fail to find and
initialise the PCI devices in the system.

Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering:
http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html

The reason for this is that:
 ``All PCI busses located behind a PCI-PCI bridge must reside between the
secondary bus number and the subordinate bus number (inclusive).''

"pci=assign-busses" makes pcibios_assign_all_busses return 1 and this
turns on PCI renumbering during PCI probing.

Alan suggested to use DMI automatically set assign-busses on problem systems.

The only question for me was where to put it.  I put it directly before
scanning PCI bus into pcibios_scan_root() because it's called from legacy,
acpi and numa and so it can be one place for all systems and configurations
which may need it.

AMD64 Laptops are also affected and fixed by assign-busses, and the code is
also incuded from arch/x86_64/pci/ that place will also work for x86_64
kernels, I only ifdef'-ed the x86-only Laptop in this example.

Affected and known or assumed to be fixed with it are (found by googling):

* ASUS Z71V and L3s
* Samsung X20
* Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller,
  also Compaq R4000 series (from a kernel.org bugreport)
* HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it)
* HP zv5200z
* IBM ThinkPad 240
* An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek
  gives the correspondig message which detects the possible problem.
* MSI S260 / Medion SIM 2100 MD 95600

The patch also expands the "try pci=assign-busses" warning so testers will
help us to update the DMI table.

Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: fix problems with MSI-X on ia64
Grant Grundler [Fri, 17 Feb 2006 07:58:29 +0000 (23:58 -0800)]
[PATCH] PCI: fix problems with MSI-X on ia64

Use "unsigned long" when dealing with PCI resources.
The BAR Indicator Register (BIR) can be a 64-bit value
or the resource could be a 64-bit host physical address.

Enables ib_mthca and cciss drivers to use MSI-X on ia64 HW.
Problem showed up now because of new system firmware on one platform.
Symptom will either be memory corruption or MCA.

Second part of this patch deals with "useless" code.
We walk through the steps to find the phys_addr and then
don't use the result. I suspect the intent was to zero
out the respective MSI-X entry but I'm not sure at the moment.
Delete the code inside the #if 0/#endif if it's really
not needed.

Signed-off-by: Grant Grundler <iod00d@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: resource address mismatch
Linus Torvalds [Wed, 22 Feb 2006 23:50:30 +0000 (15:50 -0800)]
[PATCH] PCI: resource address mismatch

On Tue, 21 Feb 2006, Ivan Kokshaysky wrote:
> There are two bogus entries in the BIOS memory map table which are
> conflicting with a prefetchable memory range of the AGP bridge:
>
>  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>
> 0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
>  Flags: bus master, fast devsel, latency 0
>  Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>  I/O behind bridge: 0000c000-0000cfff
>  Memory behind bridge: e7e00000-e7efffff
>  Prefetchable memory behind bridge: fec00000-ffcfffff
>     ^^^^^^^^^^^^^^^^^

Yes. However, it's pretty clear that the e820 entries are there for a
reason. Probably they are a hack by the BIOS maintainers to keep Windows
from stomping/moving that region, exactly because they want to keep the
bridge where it is (or, it's actually for the BIOS itself - the BIOS
tables are a horrid mess, and BIOS engineers are pretty hacky people:
they'll add random entries to make their own broken algorithms do the
"right thing").

> Starting from 2.6.13, kernel tries to resolve that sort of conflicts,
> so that prefetch window of the bridge and the framebuffer memory behind
> it get moved to 0x10000000.

I think we could (and probably should) solve this another way: consider
the ACPI "reserved regions" from the e820 map exactly the same way that we
do other ACPI hints - they should restrict _new_ allocations, but not
impact stuff we figure out on our own.

Basically, right now we assign _unassigned_ resources at "fs_initcall"
time. If we were to add in the e820 "reserved region" stuff before that
(but after we've done PCI discovery), we'd probably do the right thing.

Right now we do the e820 reserved regions very early indeed: we call
"register_memory()" from setup_arch(). We could move at least part of it
(the part that registers the resources) down a bit.

Here's a test-patch. I'm not saying we should absolutely do this, but it
might be interesting to try...

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: <bjk@luxsci.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: remove msi save/restore code in specific driver
Shaohua Li [Wed, 8 Feb 2006 09:11:40 +0000 (17:11 +0800)]
[PATCH] PCI: remove msi save/restore code in specific driver

Remove pcie port driver's msi save/restore code.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: make MSI quirk inheritable from the pci bus
Michael S. Tsirkin [Tue, 14 Feb 2006 16:52:22 +0000 (18:52 +0200)]
[PATCH] PCI: make MSI quirk inheritable from the pci bus

It turns out AMD 8131 quirk only affects MSI for devices behind the 8131 bridge.
Handle this by adding a flags field in pci_bus, inherited from parent to child.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: quirk for asus a8v and a8v delux motherboards
Bauke Jan Douma [Tue, 28 Feb 2006 20:44:36 +0000 (21:44 +0100)]
[PATCH] PCI: quirk for asus a8v and a8v delux motherboards

On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
and MC97 modem controller are deactivated when a second PCI soundcard
is present.  This patch enables them.

Signed-off-by: Bauke Jan Douma <bjdouma@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: SMBus unhide on HP Compaq nx6110
tomek@koprowski.org [Sun, 19 Feb 2006 17:03:24 +0000 (18:03 +0100)]
[PATCH] PCI: SMBus unhide on HP Compaq nx6110

I attach a trivial patch for 2.6.15.4 that unhides SMBus controller
on an HP Compaq nx6110 notebook.

Signed-off-by: Tomasz Koprowski <tomek@koprowski.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Add pci_device_shutdown to pci_bus_type
Brian Gerst [Sun, 19 Feb 2006 21:05:52 +0000 (16:05 -0500)]
[PATCH] PCI: Add pci_device_shutdown to pci_bus_type

The extra compatability code is not necessary.  Any code still using
the old shutdown method will trigger the warning in driver_register()
instead.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp: adapt to pci driver model
Kenji Kaneshige [Tue, 21 Feb 2006 23:45:50 +0000 (15:45 -0800)]
[PATCH] shpchp: adapt to pci driver model

This patch adapts SHPCHP driver to the PCI device driver model.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp: Fix slot state handling
Kenji Kaneshige [Tue, 21 Feb 2006 23:45:48 +0000 (15:45 -0800)]
[PATCH] shpchp: Fix slot state handling

Current SHPCHP driver doesn't care about the confliction between
hotplug operation via sysfs and hotplug operation via attention
button. So if those ware conflicted, slot could be an unexpected
state.

This patch changes SHPCHP driver to handle slot state properly. With
this patch, slot events are handled according to the current slot
state as shown at the Table below.

Table. Slot States and Event Handling
=========================================================================
Slot State Event and Action
=========================================================================
STATIC - Go to POWERON state if user initiates
(Slot enabled,   insertion request via sysfs
 Slot disabled) - Go to POWEROFF state if user initiates removal
  request via sysfs
- Go to BLINKINGON state if user presses
  attention button when the slot is disabled
- Go to BLINKINGOFF state if user presses
  attention button when the slot is enabled

18 years ago[PATCH] shpchp: event handling rework
Kenji Kaneshige [Tue, 21 Feb 2006 23:45:45 +0000 (15:45 -0800)]
[PATCH] shpchp: event handling rework

The event handler of SHPCHP driver is unnecessarily very complex. In
addition, current event handler can only a fixed number of events at
the same time, and some of events would be lost if several number of
events happened at the same time.

This patch simplify the event handler by using 'work queue', and it
also fix the above-mentioned issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp: Remove unused wait_for_ctrl_irq
Kenji Kaneshige [Tue, 21 Feb 2006 23:45:42 +0000 (15:45 -0800)]
[PATCH] shpchp: Remove unused wait_for_ctrl_irq

The wait_for_ctrl_irq() function in SHPCHP driver is no longer needed.
This patch removes that. This patch has no functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp: Remove unused pci_bus member from controller structure
Kenji Kaneshige [Tue, 21 Feb 2006 23:45:38 +0000 (15:45 -0800)]
[PATCH] shpchp: Remove unused pci_bus member from controller structure

This patch removes unused 'pci_bus' member from controller structure.
This patch have no functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Avoid leaving MASTER_ABORT disabled permanently when returning from...
Ralf Baechle [Tue, 14 Feb 2006 16:23:57 +0000 (16:23 +0000)]
[PATCH] PCI: Avoid leaving MASTER_ABORT disabled permanently when returning from pci_scan_bridge.

> On Mon, Feb 13, 2006 at 05:13:21PM -0800, David S. Miller wrote:
> >
> > In drivers/pci/probe.c:pci_scan_bridge(), if this is not the first
> > pass (pass != 0) we don't restore the PCI_BRIDGE_CONTROL_REGISTER and
> > thus leave PCI_BRIDGE_CTL_MASTER_ABORT off:
> >
> > int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
> > {
> >  ...
> >  /* Disable MasterAbortMode during probing to avoid reporting
> >     of bus errors (in some architectures) */
> >  pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
> >  pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
> >        bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
> >  ...
> >  if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
> >  unsigned int cmax, busnr;
> >  /*
> >   * Bus already configured by firmware, process it in the first
> >   * pass and just note the configuration.
> >   */
> >  if (pass)
> >  return max;
> >  ...
> >  }
> >
> >  pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
> >  ...
> >
> > This doesn't seem intentional.

Agreed, looks like an accident.  The patch [1] originally came from Kip
Walker (Broadcom back then) between 2.6.0-test3 and 2.6.0-test4.  As I
recall it was supposed to fix an issue with with PCI aborts being
signalled by the PCI bridge of the Broadcom BCM1250 family of SOCs when
probing behind pci_scan_bridge.  It is undeseriable to disable
PCI_BRIDGE_CTL_MASTER_ABORT in pci_{read,write)_config_* and the
behaviour wasn't considered a bug in need of a workaround, so this was
put in probe.c.

I don't have an affected system at hand, so can't really test but I
propose something like the below patch.

[1] http://www.linux-mips.org/git?p=linux.git;a=commit;h=599457e0cb702a31a3247ea6a5d9c6c99c4cf195

[PCI] Avoid leaving MASTER_ABORT disabled permanently when returning from pci_scan_bridge.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Give PCI config access initialization a defined ordering
Andi Kleen [Thu, 23 Mar 2006 22:35:12 +0000 (14:35 -0800)]
[PATCH] PCI: Give PCI config access initialization a defined ordering

I moved it to a separate function which is safer.

This avoids problems with the linker reordering them and the
less useful PCI config space access methods taking priority
over the better ones.

Fixes some problems with broken MMCONFIG

Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - Fix incorrect return value of interrupt handler
Kenji Kaneshige [Thu, 26 Jan 2006 01:05:57 +0000 (10:05 +0900)]
[PATCH] shpchp - Fix incorrect return value of interrupt handler

Current SHPCHP driver has a bug in its interrupt handler which cause
"IRQ #: nobody cared" oops. This problem can be reproduced easily by
the following operation.

    # cd /sys/bus/pci/slots/<slot#>
    # while true; do echo 1 > attention ; done &

The reason is that when command complete interrupt is raised, current
SHPCHP driver's interrupt handler returns IRQ_NONE regardless of if
the interrupt is handled or not.

This patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - move slot name into struct slot
Kenji Kaneshige [Thu, 26 Jan 2006 01:04:56 +0000 (10:04 +0900)]
[PATCH] shpchp - move slot name into struct slot

This patch moves slot name area into struct slot.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - removed unncessary 'magic' member from slot
Kenji Kaneshige [Thu, 26 Jan 2006 01:03:40 +0000 (10:03 +0900)]
[PATCH] shpchp - removed unncessary 'magic' member from slot

This patch removes unnecessary 'magic' member from struct slot of
SHPCHP driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - replace kmalloc() with kzalloc() and cleanup arg of sizeof()
Kenji Kaneshige [Thu, 26 Jan 2006 01:02:41 +0000 (10:02 +0900)]
[PATCH] shpchp - replace kmalloc() with kzalloc() and cleanup arg of sizeof()

This patch replaces kmalloc() and memset() pair with kzalloc() and
cleans up the arg of sizeof() in SHPCHP driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] pcihp_skeleton.c cleanup
Kenji Kaneshige [Thu, 26 Jan 2006 01:01:35 +0000 (10:01 +0900)]
[PATCH] pcihp_skeleton.c cleanup

This patch cleans up pcihp_skelton.c as follows.

  o Move slot name area into struct slot.
  o Replace kmalloc with kzalloc and clean up the arg of sizeof()
  o Fix the wrong use of get_*_status() functions.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - bugfix: add missing serialization
Kenji Kaneshige [Thu, 26 Jan 2006 01:00:33 +0000 (10:00 +0900)]
[PATCH] shpchp - bugfix: add missing serialization

Current shpchp driver might cause system panic because of lack of
serialization. It can be reproduced very easily by the following
operation.

# cd /sys/bus/pci/slots/<slot#>
# while true; do echo 0 > power ; echo 1 > power ; done &
# while true; do echo 0 > power ; echo 1 > power ; done &

This patch fixes this issue by changing shpchp to get appropreate
semaphore for hot-plug operation.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - cleanup check command status
Kenji Kaneshige [Thu, 26 Jan 2006 00:59:24 +0000 (09:59 +0900)]
[PATCH] shpchp - cleanup check command status

This patch cleanups codes that check the command status. For this, it
introduces a new semaphore "cmd_sem" for each controller.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - cleanup controller list
Kenji Kaneshige [Thu, 26 Jan 2006 00:58:30 +0000 (09:58 +0900)]
[PATCH] shpchp - cleanup controller list

This patch changes SHPCHP driver to use list_head structure for
managing controller list.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - cleanup slot list
Kenji Kaneshige [Thu, 26 Jan 2006 00:57:40 +0000 (09:57 +0900)]
[PATCH] shpchp - cleanup slot list

This patch changes SHPCHP driver to use list_head structure for
managing slot list.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - cleanup shpchp_core.c
Kenji Kaneshige [Thu, 26 Jan 2006 00:56:53 +0000 (09:56 +0900)]
[PATCH] shpchp - cleanup shpchp_core.c

This patch cleanups some codes in shpchp_core.c. This patch has no
functional changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] shpchp - cleanup init_slots()
Kenji Kaneshige [Thu, 26 Jan 2006 00:55:35 +0000 (09:55 +0900)]
[PATCH] shpchp - cleanup init_slots()

This patch cleanups init_slots() function of SHPCHP driver based on
pcihp_skelton.c. This patch has no functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI hotplug: convert semaphores to mutex
Ingo Molnar [Fri, 13 Jan 2006 15:02:15 +0000 (16:02 +0100)]
[PATCH] PCI hotplug: convert semaphores to mutex

semaphore to mutex conversion.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

build tested with allyesconfig.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: quirk for IBM Dock II cardbus controllers
Kristen Accardi [Wed, 18 Jan 2006 00:57:04 +0000 (16:57 -0800)]
[PATCH] PCI: quirk for IBM Dock II cardbus controllers

The IBM Dock II cardbus bridges require some extra configuration
before Yenta is loaded in order to setup the Interrupts to be
routed properly.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: really fix parent's subordinate busnr
Kristen Accardi [Wed, 18 Jan 2006 00:57:01 +0000 (16:57 -0800)]
[PATCH] PCI: really fix parent's subordinate busnr

After you find the maximum value of the subordinate buses below the child
bus, you must fix the parent's subordinate bus number again, otherwise
it may be too small.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: return max reserved busnr
Kristen Accardi [Wed, 18 Jan 2006 00:56:56 +0000 (16:56 -0800)]
[PATCH] PCI: return max reserved busnr

Change the semantics of this call to return the max reserved
bus number instead of just the max assigned bus number.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: clean up msi.c a bit
Grant Grundler [Sat, 14 Jan 2006 07:34:53 +0000 (00:34 -0700)]
[PATCH] PCI: clean up msi.c a bit

Clean up: move assignments outside of if() statements.
AFAICT, no functional change. Easier to read/understand.

Depends on "[PATCH 1/3] msi vector targeting abstractions"
by Mark Maule <maule@sgi.com>.
I expect one hunk to fail if applied against 2.6.15.

This is essentially Joe Perches' patch.
I've cleaned up the one instance added by Mark's patch.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: add required idr locking
Mark M. Hoffman [Sun, 5 Mar 2006 22:13:47 +0000 (23:13 +0100)]
[PATCH] hwmon: add required idr locking

Add required locking around idr_ routines, retry the idr_pre_get/idr_get_new
pair properly, and sprinkle in some likely/unlikely for good measure.

(Lack of idr locking didn't hurt when all callers were I2C clients, as the
i2c-core serialized for us anyway.  Now that we have non I2C hwmon drivers,
this is truly necessary.)

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: hwmon: Rename register parameters
Darren Jenkins [Mon, 27 Feb 2006 22:14:58 +0000 (23:14 +0100)]
[PATCH] I2C: hwmon: Rename register parameters

"register" is a reserved keyword so using it as a parameter name
can confuse some compilers, most notably ICC.

The patch below just renames all occurences to reg which fits the actual
function declarations.

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: Drop unneeded i2c-dev.h includes
Jean Delvare [Mon, 27 Feb 2006 22:13:53 +0000 (23:13 +0100)]
[PATCH] I2C: Drop unneeded i2c-dev.h includes

Several media/video and sound drivers include i2c-dev.h while they
don't need it at all. Clean it up.

This header file is really only needed by i2c-dev.c and
compat_ioctl.c, other drivers should never need it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: i2c-ixp4xx: Add hwmon class
Alessandro Zummo [Mon, 27 Feb 2006 22:12:58 +0000 (23:12 +0100)]
[PATCH] I2C: i2c-ixp4xx: Add hwmon class

This patch adds I2C_CLASS_HWMON to the ixp4xx bus driver.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
Martin Devera [Mon, 27 Feb 2006 22:11:45 +0000 (23:11 +0100)]
[PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support

Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note
that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3
and standard values like 0 or 9 causes hangup.

Signed-off-by: Martin Devera <devik@cdi.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization
Jean Delvare [Mon, 27 Feb 2006 22:09:22 +0000 (23:09 +0100)]
[PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization

Static mutexes can be initialized at declaration time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
18 years ago[PATCH] I2C: i2c-ali1535: Drop redundant mutex
Jean Delvare [Mon, 27 Feb 2006 22:08:18 +0000 (23:08 +0100)]
[PATCH] I2C: i2c-ali1535: Drop redundant mutex

Drop a redundant mutex in driver i2c-ali1535. The struct i2c_adapter
includes a mutex for the same purpose, operated by i2c-core.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Cleanup isp1301_omap
Jean Delvare [Sun, 5 Feb 2006 22:31:25 +0000 (23:31 +0100)]
[PATCH] i2c: Cleanup isp1301_omap

Drop unused rogue i2c driver ID and nonsensical i2c class.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Fix i2c-ite name initialization
Jean Delvare [Sun, 5 Feb 2006 22:30:26 +0000 (23:30 +0100)]
[PATCH] i2c: Fix i2c-ite name initialization

Properly set the name member of the i2c_adapter structure of the ite
i2c adapter driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Drop the i2c-frodo bus driver
Jean Delvare [Sun, 5 Feb 2006 22:29:18 +0000 (23:29 +0100)]
[PATCH] i2c: Drop the i2c-frodo bus driver

Drop the i2c-frodo bus driver. It isn't referenced by the build
system, and depends on code which was never included in 2.6 kernels.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Optimize core_lists mutex usage
Jean Delvare [Sun, 5 Feb 2006 22:28:21 +0000 (23:28 +0100)]
[PATCH] i2c: Optimize core_lists mutex usage

Stop holding the core_lists mutex when we don't actually need it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] w83781d: Don't reset the chip by default
Jean Delvare [Sun, 5 Feb 2006 22:26:51 +0000 (23:26 +0100)]
[PATCH] w83781d: Don't reset the chip by default

Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] w83781d: Document the alarm and beep bits
Jean Delvare [Sun, 5 Feb 2006 22:25:25 +0000 (23:25 +0100)]
[PATCH] w83781d: Document the alarm and beep bits

Document the individual alarm and beep bits of the w83781d driver.
Ideally we would offer a chip-independant interface for them, but
until it's done, it's only fair that we document the current
interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] w83627ehf: Refactor the sysfs interface
Yuan Mu [Sun, 5 Feb 2006 22:24:16 +0000 (23:24 +0100)]
[PATCH] w83627ehf: Refactor the sysfs interface

Use dynamic sysfs callbacks and array of attributes to reduce the
w83627ehf driver size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Support the Pentium M VID code
Jean Delvare [Sun, 5 Feb 2006 22:21:05 +0000 (23:21 +0100)]
[PATCH] hwmon: Support the Pentium M VID code

Add support for the Intel Pentium M series to the hwmon-vid driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Add support for the Winbond W83687THF
Jean Delvare [Wed, 18 Jan 2006 22:22:12 +0000 (23:22 +0100)]
[PATCH] hwmon: Add support for the Winbond W83687THF

Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: f71805f semaphore to mutex conversions
Jean Delvare [Wed, 18 Jan 2006 22:20:53 +0000 (23:20 +0100)]
[PATCH] hwmon: f71805f semaphore to mutex conversions

Convert the new f71805f hardware monitoring driver to use mutexes
instead of semaphores.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Semaphore to mutex conversions
Ingo Molnar [Wed, 18 Jan 2006 22:19:26 +0000 (23:19 +0100)]
[PATCH] hwmon: Semaphore to mutex conversions

convert drivers/hwmon/*.c semaphore use to mutexes.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

all affected hwmon drivers were build-tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Semaphore to mutex conversions, part 3
Jean Delvare [Wed, 18 Jan 2006 22:17:01 +0000 (23:17 +0100)]
[PATCH] i2c: Semaphore to mutex conversions, part 3

Cleanup after the semaphores to mutexes conversions in the i2c
subsystem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Semaphore to mutex conversions, part 2
Ingo Molnar [Wed, 18 Jan 2006 22:16:04 +0000 (23:16 +0100)]
[PATCH] i2c: Semaphore to mutex conversions, part 2

semaphore to mutex conversion.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

build tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Speed up block transfers
Jean Delvare [Wed, 18 Jan 2006 22:14:55 +0000 (23:14 +0100)]
[PATCH] i2c: Speed up block transfers

Speed up i2c_smbus_write_block_data and i2c_smbus_read_i2c_block_data
a bit by using memcpy instead of an explicit loop.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: w83792d drop useless macros
Jean Delvare [Wed, 18 Jan 2006 22:13:09 +0000 (23:13 +0100)]
[PATCH] hwmon: w83792d drop useless macros

Drop 3 useless macros in the w83792d hardware monitoring driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: w83792d use arrays of attributes
Yuan Mu [Wed, 18 Jan 2006 22:11:55 +0000 (23:11 +0100)]
[PATCH] hwmon: w83792d use arrays of attributes

Use arrays of attributes in the w83792d driver.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Refactor SENSOR_DEVICE_ATTR_2
Jim Cromie [Wed, 18 Jan 2006 22:10:49 +0000 (23:10 +0100)]
[PATCH] hwmon: Refactor SENSOR_DEVICE_ATTR_2

This patch refactors SENSOR_DEVICE_ATTR_2 macro, following pattern set by
SENSOR_ATTR.  First it creates a new macro SENSOR_ATTR_2() which expands
to an initialization expression, then it uses that in SENSOR_DEVICE_ATTR_2,
which declares and initializes a struct sensor_device_attribute_2.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: fix sx200_acb build on other arches
Jean Delvare [Sun, 22 Jan 2006 11:28:57 +0000 (12:28 +0100)]
[PATCH] I2C: fix sx200_acb build on other arches

scx200_acb is only useful on a few Geode-based systems, and won't
compile on non-x86 systems due to the lack of asm/msr.h, as reported
by Andrew Morton. Thus, we should make that driver depend on X86.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
18 years ago[PATCH] i2c: scx200_acb minimal documentation update
Ben Gardner [Wed, 18 Jan 2006 21:53:09 +0000 (22:53 +0100)]
[PATCH] i2c: scx200_acb minimal documentation update

scx200_acb: Minimal documentation update

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: scx200_acb fix and speed up the poll loop
Ben Gardner [Wed, 18 Jan 2006 21:52:06 +0000 (22:52 +0100)]
[PATCH] i2c: scx200_acb fix and speed up the poll loop

scx200_acb: Fix and speed up the poll loop

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: scx200_acb add support for the CS5535/CS5536
Ben Gardner [Wed, 18 Jan 2006 21:48:26 +0000 (22:48 +0100)]
[PATCH] i2c: scx200_acb add support for the CS5535/CS5536

scx200_acb: Add support for the CS5535/CS5536

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
18 years ago[PATCH] i2c: scx200_acb remove use of lock_kernel
Ben Gardner [Wed, 18 Jan 2006 21:46:26 +0000 (22:46 +0100)]
[PATCH] i2c: scx200_acb remove use of lock_kernel

scx200_acb: remove use of lock_kernel()

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: scx200_acb refactor/simplify code
Ben Gardner [Wed, 18 Jan 2006 21:44:04 +0000 (22:44 +0100)]
[PATCH] i2c: scx200_acb refactor/simplify code

scx200_acb: refactor/simplify code (no functional changes)

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: scx200_acb debug log cleanup
Ben Gardner [Wed, 18 Jan 2006 21:43:10 +0000 (22:43 +0100)]
[PATCH] i2c: scx200_acb debug log cleanup

scx200_acb: debug log cleanup

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: scx200_acb whitespace and comment cleanup
Ben Gardner [Wed, 18 Jan 2006 21:41:50 +0000 (22:41 +0100)]
[PATCH] i2c: scx200_acb whitespace and comment cleanup

scx200_acb: Whitespace and comment cleanup

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] I2C: Convert i2c to mutexes
Arjan van de Ven [Wed, 11 Jan 2006 09:50:26 +0000 (10:50 +0100)]
[PATCH] I2C: Convert i2c to mutexes

The patch below converts a few i2c semaphores to mutexes

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Use attribute arrays in f71805f
Jean Delvare [Mon, 9 Jan 2006 22:29:11 +0000 (23:29 +0100)]
[PATCH] hwmon: Use attribute arrays in f71805f

Convert the f71805f driver to use arrays of attributes. This shrinks the
compiled module from 12.0 kB to 9.6 kB. We certainly should do the same
for as many hardware monitoring drivers as possible.

This, together with a nice chip design by Fintek, makes this driver
very small, both in terms of number of lines of code and memory
consumption.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Use attribute arrays in pc87360
Jim Cromie [Mon, 9 Jan 2006 22:24:41 +0000 (23:24 +0100)]
[PATCH] hwmon: Use attribute arrays in pc87360

Convert individual sensors to sensor-attr arrays by each sensor type,
and initialize them in loops instead of long blocks of individual calls.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Allow sensor attributes arrays
Jim Cromie [Mon, 9 Jan 2006 22:22:24 +0000 (23:22 +0100)]
[PATCH] hwmon: Allow sensor attributes arrays

This patch refactors SENSOR_DEVICE_ATTR macro.  First it creates a new
macro SENSOR_ATTR() which expands to an initialization expression, then
it uses that in SENSOR_DEVICE_ATTR, which declares and initializes a
struct sensor_device_attribute.

IOW, SENSOR_ATTR() imitates __ATTR() in include/linux/device.h.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>