GitHub/moto-9609/android_kernel_motorola_exynos9610.git
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Tue, 3 Oct 2006 21:32:06 +0000 (14:32 -0700)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()

18 years ago[WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()
Wim Van Sebroeck [Wed, 13 Sep 2006 19:27:29 +0000 (21:27 +0200)]
[WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()

Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results

The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands.
ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Tue, 3 Oct 2006 20:48:44 +0000 (13:48 -0700)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] iTCO_wdt.c shutdown patch
  [WATCHDOG] iTCO_wdt.c - pci_dev_put fix
  [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
  [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver

18 years ago[PATCH] Remove me from maintainers for serial and mmc
Russell King [Tue, 3 Oct 2006 16:36:11 +0000 (17:36 +0100)]
[PATCH] Remove me from maintainers for serial and mmc

As advertised earlier.  I invite interested parties to take over and
add their own entries as they see fit.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 3 Oct 2006 20:03:40 +0000 (13:03 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.
  [MIPS] DECstation defconfig update
  [MIPS] Fix size of zones_size and zholes_size array
  [MIPS] BCM1480: Mask pending interrupts against c0_status.im.
  [MIPS] SB1250: Interrupt handler fixes
  [MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.
  [MIPS] Remove Atlas and SEAD from feature-removal-schedule.
  [MIPS] Remove Jaguar and Ocelot family from feature list.
  [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems
  [MIPS] Remove dead DECstation boot code
  [MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary

18 years ago[WATCHDOG] iTCO_wdt.c shutdown patch
Wim Van Sebroeck [Sat, 5 Aug 2006 18:59:01 +0000 (20:59 +0200)]
[WATCHDOG] iTCO_wdt.c shutdown patch

Since we are using the device driver model,
we don't need to arrange the shutdown via a
reboot_notifier.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
18 years ago[WATCHDOG] iTCO_wdt.c - pci_dev_put fix
Wim Van Sebroeck [Wed, 19 Jul 2006 20:39:13 +0000 (22:39 +0200)]
[WATCHDOG] iTCO_wdt.c - pci_dev_put fix

for_each_pci_dev calls pci_get_device (and thus
it calls pci_dev_get). So we need to do a pci_dev_put
to keep the refcounting correct.
(Thanks to Jiri Slaby <jirislaby@gmail.com>)

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
18 years ago[WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
Wim Van Sebroeck [Fri, 30 Jun 2006 06:44:53 +0000 (08:44 +0200)]
[WATCHDOG] iTCO_wdt (Intel TCO Timer) driver

Convert the iTCO_wdt driver to a platform device
driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
18 years ago[WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
Wim Van Sebroeck [Sun, 21 May 2006 12:37:44 +0000 (14:37 +0200)]
[WATCHDOG] iTCO_wdt (Intel TCO Timer) driver

Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
Hub family (from ICH0 up to ICH7) and in the Intel 6300ESB
controller hub.

This driver will replace the i8xx_tco.c driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
18 years agoV4L/DVB (4699): CX24109 patch to eliminate the weird mis-tunings
Steven Toth [Tue, 3 Oct 2006 00:35:40 +0000 (21:35 -0300)]
V4L/DVB (4699): CX24109 patch to eliminate the weird mis-tunings

A number of people have been reporting wierd tuning problems with various
cards. Yeasah tracked down the problem to a miss-read datasheet. This
resolves the problems.

Signed-off-by: Yeasah Pell <yeasah@schwide.net>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4698): Fix S-Video configuration for Pinnacle PCTV-Sat
Mauro Carvalho Chehab [Tue, 3 Oct 2006 02:52:48 +0000 (23:52 -0300)]
V4L/DVB (4698): Fix S-Video configuration for Pinnacle PCTV-Sat

Thanks to Edgar Toernig <froese@gmx.de> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4689): Adding support for Nova-T-PCI PCI ID 0070:9000
Steven Toth [Sat, 30 Sep 2006 01:37:07 +0000 (22:37 -0300)]
V4L/DVB (4689): Adding support for Nova-T-PCI PCI ID 0070:9000

Adding support for Nova-T-PCI PCI ID 0070:9000

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4688): Fix msp343xG handling (regression from 2.6.16)
Hans Verkuil [Sun, 1 Oct 2006 20:56:32 +0000 (17:56 -0300)]
V4L/DVB (4688): Fix msp343xG handling (regression from 2.6.16)

The msp3430G and msp3435G models cannot do Automatic Standard Detection.
So these should be forced to BTSC. These chips are early production versions
for the msp34xxG series and are quite rare.
The workaround for kernel 2.6.18 is to use 'standard=32' as msp3400
module option. Due to broken handling of the 'standard' option in 2.6.17 there is
no workaround possible for that kernel.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4686): Cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 2
Michael Krufky [Thu, 28 Sep 2006 05:16:01 +0000 (02:16 -0300)]
V4L/DVB (4686): Cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 2

Add support for DViCO FusionHDTV DVB-T Dual Digital 2 USB, which
is identical to the usb portion of DViCO FusionHDTV DVB-T Dual Digital 1.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4685): Fix compiler warning in drivers/media/video/video-buf.c
Sujoy Gupta [Sat, 30 Sep 2006 09:55:29 +0000 (06:55 -0300)]
V4L/DVB (4685): Fix compiler warning in drivers/media/video/video-buf.c

Using a double cast to avoid compiler warnings when building for PAE.
Compiler doesn't like direct casting of a 32 bit ptr to 64 bit integer.

Signed-off-by: Martin J. Bligh <mbligh@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4684): Drivers/media/video/cx88: Remove unused defined FALSE/TRUE
Richard Knutsson [Fri, 29 Sep 2006 19:15:37 +0000 (16:15 -0300)]
V4L/DVB (4684): Drivers/media/video/cx88: Remove unused defined FALSE/TRUE

Remove defines of FALSE/TRUE because they are not used.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4683): Norm_notchfilter is used on just one point and argument is bogus
Mauro Carvalho Chehab [Fri, 29 Sep 2006 15:39:36 +0000 (12:39 -0300)]
V4L/DVB (4683): Norm_notchfilter is used on just one point and argument is bogus

Removed norm_notchfilter function. All the code is bound to 4 x FSC, so, any
other filter won't work fine.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4681): Cx88: fix analog capture notch filter
Lars Gjesse Kjellberg [Tue, 26 Sep 2006 02:44:06 +0000 (23:44 -0300)]
V4L/DVB (4681): Cx88: fix analog capture notch filter

This patch changes the setting of the cx2388x notch filter to match that of
the video capture sample frequency, removing some annoying interference
lines THAT would appear when capturing composite video. This has been tested
in PAL and NTSC TV norms.
It sets the Y/C separation luma notch filter, which removes the chroma signal
from the luma signal when using a composite input.
The luma notch filter operates at the video decoder's frequency, not the ADC's
frequency or at the frequency of the scaled video. Y/C separation happens after
the sample rate converter, before video scaling.
The datasheet provides plots of the filter response for three _video decoder_
frequencies, 4x Fsc, square pixel, and ccir601.  These are the same three
frequencies for the notch filter control.  It seems pretty clear that this
filter should be set based on the video decoder frequency. The cx88 driver
always uses a video decoder frequency of 4xFsc.

Signed-off-by: Lars Gjesse Kjellberg <lars.g.kjellberg@get2net.dk>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4679): Fix for NULL pointer dereference oops during boot.
Steven Toth [Wed, 27 Sep 2006 04:16:50 +0000 (01:16 -0300)]
V4L/DVB (4679): Fix for NULL pointer dereference oops during boot.

A fix for intermittent oops's during boot which occurs
in cx88_call_i2c_clients when dvb_attach is bringing up
the frontend.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4675): Pvrusb2: Fix VIDIOC_INT_[G|S]_REGISTER so that it actually works now
Mike Isely [Thu, 28 Sep 2006 20:53:49 +0000 (17:53 -0300)]
V4L/DVB (4675): Pvrusb2: Fix VIDIOC_INT_[G|S]_REGISTER so that it actually works now

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4674): Use NULL instead of 0 for ptrs
Randy Dunlap [Thu, 28 Sep 2006 17:03:26 +0000 (14:03 -0300)]
V4L/DVB (4674): Use NULL instead of 0 for ptrs

Use NULL instead of 0 for pointer value, eliminate sparse warnings.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4673): Mark the two newer ioctls as experimental
Mauro Carvalho Chehab [Thu, 28 Sep 2006 16:48:26 +0000 (13:48 -0300)]
V4L/DVB (4673): Mark the two newer ioctls as experimental

VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls are meant
to be used to provide better support for webcams. Currently, it is not yet
used on kernel drivers.
Better to keep it marked as experimental, until we have several kernel drivers
supporting those features.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4672): Frame format enumeration (1/2)
Laurent Pinchart [Thu, 28 Sep 2006 16:42:05 +0000 (13:42 -0300)]
V4L/DVB (4672): Frame format enumeration (1/2)

Add VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls to enumerate
supported frame sizes and frame intervals.

Signed-off-by: Martin Rubli <martin.rubli@epfl.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4671): Support for SAA7134-based AVerTV Hybrid A16AR
Petr Baudis [Tue, 26 Sep 2006 19:53:53 +0000 (16:53 -0300)]
V4L/DVB (4671): Support for SAA7134-based AVerTV Hybrid A16AR

This adds support for a hybrid PAL/DVB/FM card.  Unfortunately I tested
only the DVB since I don't have any proper antenna available and I can
receive even the DVB just barely so; I can hear noise in the FM part but I
couldn't catch any station, then again I don't have an FM antenna either.
The PAL/FM and IR control data are based on what I harvested on the 'net.
Perhaps I or someone else will fix them if they turn out to be wrong.

Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4670): Allow RC5 codes 64 - 127 in ir-kbd-i2c.c
David Hardeman [Tue, 26 Sep 2006 19:39:00 +0000 (16:39 -0300)]
V4L/DVB (4670): Allow RC5 codes 64 - 127 in ir-kbd-i2c.c

The RC5 coding has for a long time supported commands 64-127 in addition
to 0-63.  This is controlled by the second bit of the RC5 packet (see
The attached patch modifies ir-kbd-i2c.c to allow for commands 64-127,
tested with a PVR350 card in combination with a programmable remote.

Signed-off-by: David Hardeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4669): Cx88: autodetect Club3D Zap TV2100 by subsystem id 12ab:2300
Michael Krufky [Mon, 25 Sep 2006 17:14:24 +0000 (14:14 -0300)]
V4L/DVB (4669): Cx88: autodetect Club3D Zap TV2100 by subsystem id 12ab:2300

The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and
KWorld/VStream XPert DVB-T with cx22702

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4668): Cx88: rename mpeg capability flags from CX88_BOARD_FOO to CX88_MPEG_FOO
Michael Krufky [Mon, 25 Sep 2006 17:09:10 +0000 (14:09 -0300)]
V4L/DVB (4668): Cx88: rename mpeg capability flags from CX88_BOARD_FOO to CX88_MPEG_FOO

The flags for mpeg capabilities are sub-optimally named as
CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion.
This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4667): Changed cx88_board .dvb and .register to an enum.
Steven Toth [Mon, 25 Sep 2006 15:43:45 +0000 (12:43 -0300)]
V4L/DVB (4667): Changed cx88_board .dvb and .register to an enum.

Some basic cleanup in preperation for a future patch where
the cx88-mpeg functions have to deal with the port being
used by multiple frontends in (mpeg2 hw encoder and dvb demod).

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4666): Ensure the WM8775 driver is loaded generically for any board.
Steven Toth [Mon, 25 Sep 2006 15:43:42 +0000 (12:43 -0300)]
V4L/DVB (4666): Ensure the WM8775 driver is loaded generically for any board.

A generic change to cards to allow any board to specify whether
it needs the wm8775 module loaded (by the core) or not.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4665): Add frontend structure callback for bus acquisition.
Steven Toth [Mon, 25 Sep 2006 15:41:53 +0000 (12:41 -0300)]
V4L/DVB (4665): Add frontend structure callback for bus acquisition.

This patch enables generic bus arbitration callbacks enabling
dvbcore frontend_open and frontend_release to pass 'acquire'
and 'release' hardware messages back into the DVB bridge frameworks.
Frameworks like cx88 can then implement single bus multiple demod
card sharing features, which would prohibit two frontends from attempting
to use a single transport bus at the same time.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4664): Pvrusb2: Don't use videodev.h; use v4l2-dev.h in its place
Mike Isely [Sun, 24 Sep 2006 02:47:50 +0000 (23:47 -0300)]
V4L/DVB (4664): Pvrusb2: Don't use videodev.h; use v4l2-dev.h in its place

The function prototype needed in pvrusb2-v4l2.c has been moved to
v4l2-dev.h.  Track that change.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4663): Pvrusb2: Get rid of private global context array brain damage
Mike Isely [Sun, 24 Sep 2006 01:30:50 +0000 (22:30 -0300)]
V4L/DVB (4663): Pvrusb2: Get rid of private global context array brain damage

A previous attempt to deal with the upcoming loss of
video_set_drvdata() and video_get_drvdata() resulted in logic which
causes a circular locking dependency - also known as a deadlock.  This
changeset attacks the problem in a different manner, using a technique
that no longer requires the problematic mutex (or that private global
array either).

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4662): Pvrusb2: Implement VIDIOC_INT_[G|S]_REGISTER
Mike Isely [Sun, 24 Sep 2006 01:26:52 +0000 (22:26 -0300)]
V4L/DVB (4662): Pvrusb2: Implement VIDIOC_INT_[G|S]_REGISTER

Implement VIDIOC_INT_SET_REGISTER and VIDIOC_INT_GET_REGISTER for the
pvrusb2 driver.  This is a debugging aid which will not be enabled
unless CONFIG_VIDEO_ADV_DEBUG has been enabled.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4661): Pvrusb2: improve 24XXX config option description
Mike Isely [Sun, 24 Sep 2006 01:19:29 +0000 (22:19 -0300)]
V4L/DVB (4661): Pvrusb2: improve 24XXX config option description

The CONFIG_VIDEO_PVRUSB2_24XXX is not nearly as "experimental" as the
description suggests.  So refine the description to better match reality.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4660): Some cleanups at helper chips menu
Mauro Carvalho Chehab [Sat, 30 Sep 2006 09:54:14 +0000 (06:54 -0300)]
V4L/DVB (4660): Some cleanups at helper chips menu

Rearranged itens, so that decoders came first;
cx25840 is, in fact, an audio and video decoder;
Fixed some incorrect upercases;
Removed the word "chip" for some audio processors at item name;
Removed the word "driver" for some item names;

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4658): Another fix because of dvb_attach
Patrick Boettcher [Wed, 20 Sep 2006 09:06:58 +0000 (06:06 -0300)]
V4L/DVB (4658): Another fix because of dvb_attach

Fixed mt2060-usage with dvb_attach

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4657): Power control of the device for dual board
Patrick Boettcher [Wed, 20 Sep 2006 09:06:11 +0000 (06:06 -0300)]
V4L/DVB (4657): Power control of the device for dual board

Corrected power control of the device for dual boards

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4656): Fixed dvb_attach for dib3000mc in dibusb
Patrick Boettcher [Wed, 20 Sep 2006 07:42:23 +0000 (04:42 -0300)]
V4L/DVB (4656): Fixed dvb_attach for dib3000mc in dibusb

When converting the dib3000mc-driver to dvb_attach I forgot to invert the check for NULL.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4655): Removed compilation warnings
Patrick Boettcher [Wed, 20 Sep 2006 07:40:14 +0000 (04:40 -0300)]
V4L/DVB (4655): Removed compilation warnings

Removed compilation warnings for unused statics and locals

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4654): Added module parameter force_lna_activation
Patrick Boettcher [Wed, 20 Sep 2006 07:37:18 +0000 (04:37 -0300)]
V4L/DVB (4654): Added module parameter force_lna_activation

Added a module parameter for force the activation of any LNA on a board.
Suggest by Steve Toth.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4654a): dib700m is not yet ready.
Patrick Boettcher [Tue, 26 Sep 2006 07:10:14 +0000 (04:10 -0300)]
V4L/DVB (4654a): dib700m is not yet ready.

Removing include for kernel 2.6.19

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4653): Misc fixes for Nova-T 500
Patrick Boettcher [Tue, 19 Sep 2006 15:51:56 +0000 (12:51 -0300)]
V4L/DVB (4653): Misc fixes for Nova-T 500

- forward the clock to the slave undivided
- when sleeping the 3000 do not shutdown the clock

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4652): Misc fixes for DiB3000MC and Nova-T 500
Patrick Boettcher [Tue, 19 Sep 2006 15:51:53 +0000 (12:51 -0300)]
V4L/DVB (4652): Misc fixes for DiB3000MC and Nova-T 500

- make the timing frequency update work.
- fix AGC calibration for Nova-T 500

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4651): Adding another USB product ID for Nova-T 500
Patrick Boettcher [Tue, 19 Sep 2006 15:51:49 +0000 (12:51 -0300)]
V4L/DVB (4651): Adding another USB product ID for Nova-T 500

Adding another USB product ID for the Nova-T 500. Reported by Jose Alberto Reguero.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4650): Misc fixes for dib0700 download
Patrick Boettcher [Tue, 19 Sep 2006 15:51:46 +0000 (12:51 -0300)]
V4L/DVB (4650): Misc fixes for dib0700 download

Several fixes for dib0700-module. (Firmware error checking, dependency)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4649): Merged VP702x support to dvb-usb multi input
Patrick Boettcher [Tue, 19 Sep 2006 15:51:43 +0000 (12:51 -0300)]
V4L/DVB (4649): Merged VP702x support to dvb-usb multi input

The fixed support for the VP70x (supports only StarBox2) is now in sync with
latest changes in the dvb-usb framework.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4648): Hauppauge Nova-T 500 support added
Patrick Boettcher [Tue, 19 Sep 2006 15:51:40 +0000 (12:51 -0300)]
V4L/DVB (4648): Hauppauge Nova-T 500 support added

This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T).
It adds correct AGC setting for the 3000P, correct firmware download state
detection.
Additionally it fixes the mt2060-driver to be able to be used with dvb_attach.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4647): Added module for DiB0700 based devices
Patrick Boettcher [Tue, 19 Sep 2006 15:51:37 +0000 (12:51 -0300)]
V4L/DVB (4647): Added module for DiB0700 based devices

Added module for DiB0700 based USB devices. This module is preliminary and
untested (because of a lack of test devices) but should work.
Further commits will be necessary to make it work properly.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4646): Misc. changes, DiB3000MC, MT2060
Patrick Boettcher [Tue, 19 Sep 2006 15:51:33 +0000 (12:51 -0300)]
V4L/DVB (4646): Misc. changes, DiB3000MC, MT2060

Changed the attach-function of the dib3000mc-driver to return only one
frontend. In case of multiple dib3000-chips on one board, one has to call the
i2c-enumeration manually before.
Added a field to Microtune 2060 config to output the clock to other
tuners/device on a board.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4645): Added new file for multiple input rewrite
Patrick Boettcher [Tue, 19 Sep 2006 15:51:30 +0000 (12:51 -0300)]
V4L/DVB (4645): Added new file for multiple input rewrite

Forgot to add usb-urb.c which is new after adding support for multiple inputs

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4644): Multi-input fix for dtt200u
Patrick Boettcher [Tue, 19 Sep 2006 15:51:27 +0000 (12:51 -0300)]
V4L/DVB (4644): Multi-input fix for dtt200u

Small fix for multi input for dtt200u module.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (4643): Multi-input patch for DVB-USB device
Patrick Boettcher [Sat, 30 Sep 2006 09:53:48 +0000 (06:53 -0300)]
V4L/DVB (4643): Multi-input patch for DVB-USB device

This patch is the first commit of the Multiple Input Patch for the DVB-USB frame
work.
It changes the DVB-USB-device to be able to have more than one streaming input
(e.g. multiple DVB-T sources) on one device. This is a necessary feature for
the upcoming DiB7700 driven devices.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years ago[MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.
Ralf Baechle [Mon, 2 Oct 2006 15:54:48 +0000 (16:54 +0100)]
[MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] DECstation defconfig update
Maciej W. Rozycki [Tue, 3 Oct 2006 11:27:38 +0000 (12:27 +0100)]
[MIPS] DECstation defconfig update

Sanitise a number of settings for the DECstation.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix size of zones_size and zholes_size array
Atsushi Nemoto [Fri, 29 Sep 2006 18:34:06 +0000 (03:34 +0900)]
[MIPS] Fix size of zones_size and zholes_size array

Commit f06a96844a577c43249fce25809a4fae07407f46 broke MIPS.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] BCM1480: Mask pending interrupts against c0_status.im.
Ralf Baechle [Tue, 3 Oct 2006 13:42:02 +0000 (14:42 +0100)]
[MIPS] BCM1480: Mask pending interrupts against c0_status.im.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] SB1250: Interrupt handler fixes
Maciej W. Rozycki [Tue, 3 Oct 2006 11:42:02 +0000 (12:42 +0100)]
[MIPS] SB1250: Interrupt handler fixes

Mask cp0.status against cp0.cause.  Additionally, spurious interrupts are
not recorded.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.
Yoichi Yuasa [Mon, 2 Oct 2006 14:19:00 +0000 (23:19 +0900)]
[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.

As per feature-removal-schedule.txt.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove Atlas and SEAD from feature-removal-schedule.
Ralf Baechle [Mon, 2 Oct 2006 15:36:51 +0000 (16:36 +0100)]
[MIPS] Remove Atlas and SEAD from feature-removal-schedule.

Maciej has started fixing the code for these platforms.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove Jaguar and Ocelot family from feature list.
Ralf Baechle [Mon, 2 Oct 2006 15:32:43 +0000 (16:32 +0100)]
[MIPS] Remove Jaguar and Ocelot family from feature list.

There are remaining users with interest in the platform after all.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems
Maciej W. Rozycki [Mon, 2 Oct 2006 11:55:09 +0000 (12:55 +0100)]
[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems

 It was obesrved that at least one older PCI card predating the
requirement for the TRDY signal to respond within 16 clock ticks actually
does not meet this rule nor even the power-on defaults of the PCI bridges
found in development systems built around the Broadcom SiByte SOCs.  Here
is a patch that bumps up the timeout to the highest finite value supported
by these chips, which is 255 clock ticks.  The bridges affected are the
SiByte SOC itself and the SP1011.

 This change does not effectively affect systems only having PCI option
cards installed that meet the TRDY requirement of the current PCI spec.
The rule was introduced with PCI 2.1, so any older card may make the
system affected.  If this is the case, performance of the system will
suffer in return for the card working at all.  If this is a concern, then
the solution is not to use such cards.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

18 years ago[MIPS] Remove dead DECstation boot code
Maciej W. Rozycki [Fri, 29 Sep 2006 18:06:38 +0000 (19:06 +0100)]
[MIPS] Remove dead DECstation boot code

Code in arch/mips/dec/boot/ has been dead for long.  Let's get rid of it
before some epidemic spreads.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary
Franck Bui-Huu [Fri, 29 Sep 2006 09:08:59 +0000 (11:08 +0200)]
[MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary

The stack pointer in MIPS/gcc should always 8 bytes aligned on
entry to any routines. Therefore pt_regs structure must be
aligned to 8-byte boundary too.

Instead of creating dummy fields to achieve this alignment, this
patch let gcc doing it. Therefore 'smtc_pad' field can be safely
removed.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years agox86: Fix booting with "no387 nofxsr"
Linus Torvalds [Tue, 3 Oct 2006 16:45:46 +0000 (09:45 -0700)]
x86: Fix booting with "no387 nofxsr"

Jesper Juhl reported that testing the software math-emulation by forcing
"no387" doesn't work on modern CPU's.

The reason was two-fold:
 - you also need to pass in "nofxsr" to make sure that we not only don't
   touch the old i387 legacy hardware, it also needs to disable the
   modern XMM/FXSR sequences
 - "nofxsr" didn't actually clear the capability bits immediately,
   leaving the early boot sequence still using FXSR until we got to
   the identify_cpu() stage.

This fixes the "nofxsr" flag to take effect immediately on the boot CPU.

Debugging by Randy Dunlap

Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 3 Oct 2006 16:14:00 +0000 (09:14 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support
  [ARM] 3880/1: remove the last trace of iop31x support
  [ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernet
  [ARM] 3809/3: get rid of 4 megabyte kernel image size limit
  [ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.c
  [ARM] 3874/1: Remove leftover usage of asm/timeofday.h

18 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 3 Oct 2006 16:13:29 +0000 (09:13 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-serial

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits)
  [SERIAL] add PNP IDs for FPI based touchscreens
  [SERIAL] Magic SysRq SAK does nothing on serial consoles
  [SERIAL] tickle NMI watchdog on serial output.
  [SERIAL] Fix oops when removing suspended serial port
  [SERIAL] Fix resume handling bug
  [SERIAL] Remove wrong asm/serial.h inclusions
  [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c
  [SERIAL] OMAP1510 serial fix for 115200 baud
  [SERIAL] returning proper error from serial core driver
  [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port
  [SERIAL] suspend/resume handlers don't have level arg anymore
  [SERIAL] 8250 resourse management fixes
  [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card
  [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk
  [SERIAL] serial_cs: add configuration quirk
  [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk
  [SERIAL] serial_cs: convert IBM post-init handling to a quirk
  [SERIAL] serial_cs: allow wildcarded quirks
  [SERIAL] serial_cs: convert multi-port table to quirk table
  [SERIAL] serial_cs: Use clean up multiport card detection
  ...

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Tue, 3 Oct 2006 15:54:28 +0000 (08:54 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fixup __raw_read_trylock().
  sh: Kill off remaining config.h references.
  sh: Initial gitignore list
  sh: build fixes for defconfigs.
  sh: Kill off more dead headers.
  sh: Set pclk default for SH7705.
  sh: defconfig updates.

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6
Linus Torvalds [Tue, 3 Oct 2006 15:53:46 +0000 (08:53 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh64-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Remove me from sh64 maintainers.
  sh64: Update cayman defconfig.

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 3 Oct 2006 15:53:26 +0000 (08:53 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more.
  [SPARC64]: Move signal compat bits to new header file.

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 3 Oct 2006 15:52:26 +0000 (08:52 -0700)]
Merge git://git./linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
  [POWERPC] Fix rheap alignment problem
  [POWERPC] Use check_legacy_ioport() for ISAPnP
  [POWERPC] Avoid NULL pointer in gpio1_interrupt
  [POWERPC] Enable generic rtc hook for the MPC8349 mITX
  [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
  [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
  [POWERPC] fix spin lock nesting in hvc_iseries
  [POWERPC] EEH failure to mark pci slot as frozen.
  [POWERPC] update powerpc defconfig files after libata kconfig breakage
  [POWERPC] enable sysrq in pmac32_defconfig
  [POWERPC] UPIO_TSI cleanup
  [POWERPC] rewrite mkprep and mkbugboot in sane C
  [POWERPC] maple/pci iomem annotations
  [POWERPC] powerpc oprofile __user annotations
  [POWERPC] cell spufs iomem annotations
  [POWERPC] NULL noise removal: spufs
  [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
  [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
  [POWERPC] Always call cede in pseries dedicated idle loop
  [POWERPC] Fix loop logic in irq_alloc_virt()
  ...

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Tue, 3 Oct 2006 15:51:38 +0000 (08:51 -0700)]
Merge git://git./linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: trivial documentation fixes
  kconfig: fix saving alternate kconfig file in parent dir
  kbuild: make modpost processing configurable
  kconfig/menuconfig: do not let ncurses clutter screen on exit
  kconfig/lxdialog: clear long menu lines
  kbuild: do not build mconf & lxdialog unless needed
  kconfig/lxdialog: fix make mrproper
  kconfig/lxdialog: support resize
  kconfig/lxdialog: let <ESC><ESC> behave as expected
  kconfig/menuconfig: lxdialog is now built-in
  kconfig/lxdialog: add a new theme bluetitle which is now default
  kconfig/lxdialog: add support for color themes and add blackbg theme
  kconfig/lxdialog: refactor color support

18 years ago[PATCH] pr_debug: check pr_debug() arguments
Zach Brown [Tue, 3 Oct 2006 08:16:15 +0000 (01:16 -0700)]
[PATCH] pr_debug: check pr_debug() arguments

check pr_debug() arguments

When DEBUG isn't defined pr_debug() is defined away as an empty macro.  By
throwing away the arguments we allow completely incorrect code to build.

Instead let's make it an empty inline which checks arguments and mark it so gcc
can check the format specification.

This results in a seemingly insignificant code size increase.  A x86-64
allyesconfig:

   text    data     bss     dec     hex filename
25354768        7191098 4854720 37400586        23ab00a vmlinux.before
25354945        7191138 4854720 37400803        23ab0e3 vmlinux

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] isdn: more pr_debug() fixes
Andrew Morton [Tue, 3 Oct 2006 08:16:15 +0000 (01:16 -0700)]
[PATCH] isdn: more pr_debug() fixes

drivers/isdn/sc/event.c: In function 'indicate_status':
drivers/isdn/sc/event.c:49: error: 'events' undeclared (first use in this function)
drivers/isdn/sc/event.c:49: error: (Each undeclared identifier is reported only once
drivers/isdn/sc/event.c:49: error: for each function it appears in.)
drivers/isdn/sc/event.c:49: warning: format '%d' expects type 'int', but argument 4 has type 'ulong'

drivers/isdn/sc/interrupt.c: In function 'interrupt_handler':
drivers/isdn/sc/interrupt.c:97: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

drivers/isdn/sc/timer.c: In function 'check_reset':
drivers/isdn/sc/timer.c:80: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] isdn-debug-build-fix
Andrew Morton [Tue, 3 Oct 2006 08:16:14 +0000 (01:16 -0700)]
[PATCH] isdn-debug-build-fix

When pr_debug() is enabled:

drivers/isdn/sc/command.c: In function 'command':
drivers/isdn/sc/command.c:107: error: 'commands' undeclared (first use in this function)
drivers/isdn/sc/command.c:107: error: (Each undeclared identifier is reported only once
drivers/isdn/sc/command.c:107: error: for each function it appears in.)
drivers/isdn/sc/command.c:122: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'dial':
drivers/isdn/sc/command.c:199: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'answer':
drivers/isdn/sc/command.c:221: warning: format '%s' expects type 'char *', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'hangup':
drivers/isdn/sc/command.c:244: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'setl2':
drivers/isdn/sc/command.c:265: error: 'l2protos' undeclared (first use in this function)
drivers/isdn/sc/command.c: In function 'setl3':
drivers/isdn/sc/command.c:297: error: 'l3protos' undeclared (first use in this function)
drivers/isdn/sc/command.c:297: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'acceptb':
drivers/isdn/sc/command.c:315: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'clreaz':
drivers/isdn/sc/command.c:330: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/isdn/sc/command.c: In function 'seteaz':
drivers/isdn/sc/command.c:345: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Cc: Zach Brown <zach.brown@oracle.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] arm build fail: vfpsingle.c
Frederik Deweerdt [Tue, 3 Oct 2006 08:16:11 +0000 (01:16 -0700)]
[PATCH] arm build fail: vfpsingle.c

It looks like Zach Brown's patch pr_debug-check-pr_debug-arguments
worked as inteded. That is, it doesn't "allow completely incorrect code
to build." :).

The arm build fails with the following message:
  CC      arch/arm/vfp/vfpsingle.o
  arch/arm/vfp/vfpsingle.c: In function `__vfp_single_normaliseround':
  arch/arm/vfp/vfpsingle.c:201: error: `func' undeclared (first use in
  this function)
  arch/arm/vfp/vfpsingle.c:201: error: (Each undeclared identifier is
  reported only once
  arch/arm/vfp/vfpsingle.c:201: error: for each function it appears in.)
  make[1]: *** [arch/arm/vfp/vfpsingle.o] Error 1
  make: *** [arch/arm/vfp] Error 2

The following patch fixes the issue by using func only when DEBUG is
defined.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: trident: use size_t length modifier in pr_debug format arguments
Zach Brown [Tue, 3 Oct 2006 08:16:10 +0000 (01:16 -0700)]
[PATCH] pr_debug: trident: use size_t length modifier in pr_debug format arguments

trident: use size_t length modifier in pr_debug format arguments

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: ifb: replace missing comma to separate pr_debug arguments
Zach Brown [Tue, 3 Oct 2006 08:16:10 +0000 (01:16 -0700)]
[PATCH] pr_debug: ifb: replace missing comma to separate pr_debug arguments

ifb: replace missing comma to separate pr_debug arguments

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: dell_rbu: fix pr_debug argument warnings
Zach Brown [Tue, 3 Oct 2006 08:16:09 +0000 (01:16 -0700)]
[PATCH] pr_debug: dell_rbu: fix pr_debug argument warnings

dell_rbu: fix pr_debug argument warnings

Use size_t length modifier when outputting size_t and use %p instead of %lu for
'u8 *'.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: tipar: repair nonexistant pr_debug argument use
Zach Brown [Tue, 3 Oct 2006 08:16:08 +0000 (01:16 -0700)]
[PATCH] pr_debug: tipar: repair nonexistant pr_debug argument use

tipar: repair nonexistant pr_debug argument use

I guessed what the pr_debug meant by 'data'.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: umem: repair nonexistant bh pr_debug reference
Zach Brown [Tue, 3 Oct 2006 08:16:07 +0000 (01:16 -0700)]
[PATCH] pr_debug: umem: repair nonexistant bh pr_debug reference

umem: repair nonexistant bh pr_debug reference

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: sysfs: use size_t length modifier in pr_debug format arguments
Zach Brown [Tue, 3 Oct 2006 08:16:06 +0000 (01:16 -0700)]
[PATCH] pr_debug: sysfs: use size_t length modifier in pr_debug format arguments

sysfs: use size_t length modifier in pr_debug format arguments

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: configfs: use size_t length modifier in pr_debug format argument
Zach Brown [Tue, 3 Oct 2006 08:16:05 +0000 (01:16 -0700)]
[PATCH] pr_debug: configfs: use size_t length modifier in pr_debug format argument

configfs: use size_t length modifier in pr_debug format argument

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pr_debug: aio: use size_t length modifier in pr_debug format arguments
Zach Brown [Tue, 3 Oct 2006 08:16:04 +0000 (01:16 -0700)]
[PATCH] pr_debug: aio: use size_t length modifier in pr_debug format arguments

aio: use size_t length modifier in pr_debug format arguments

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: add error reporting to superblock write failure
NeilBrown [Tue, 3 Oct 2006 08:16:03 +0000 (01:16 -0700)]
[PATCH] md: add error reporting to superblock write failure

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: allow SET_BITMAP_FILE to work on 64bit kernel with 32bit userspace
Paul Clements [Tue, 3 Oct 2006 08:16:02 +0000 (01:16 -0700)]
[PATCH] md: allow SET_BITMAP_FILE to work on 64bit kernel with 32bit userspace

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: use ffz instead of find_first_set to convert multiplier to shift
Paul Clements [Tue, 3 Oct 2006 08:16:01 +0000 (01:16 -0700)]
[PATCH] md: use ffz instead of find_first_set to convert multiplier to shift

find_first_set doesn't find the least-significant bit on bigendian machines,
so it is really wrong to use it.

ffs is closer, but takes an 'int' and we have a 'unsigned long'.  So use
ffz(~X) to convert a chunksize into a chunkshift.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: remove 'experimental' classification from raid5 reshape
NeilBrown [Tue, 3 Oct 2006 08:16:00 +0000 (01:16 -0700)]
[PATCH] md: remove 'experimental' classification from raid5 reshape

I have had enough success reports not to believe that this is safe for 2.6.19.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: remove MAX_MD_DEVS which is an arbitrary limit
NeilBrown [Tue, 3 Oct 2006 08:15:59 +0000 (01:15 -0700)]
[PATCH] md: remove MAX_MD_DEVS which is an arbitrary limit

Once upon a time we needed to fixed limit to the number of md devices,
probably because we preallocated some array.  This need no longer exists, but
we still have an arbitrary limit.

So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor'
part of a device number.

Also remove some useless noise at init time (which reports MAX_MD_DEVS) and
remove MD_THREAD_NAME_MAX which hasn't been used for a while.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: fix duplicity of levels in md.txt
NeilBrown [Tue, 3 Oct 2006 08:15:58 +0000 (01:15 -0700)]
[PATCH] md: fix duplicity of levels in md.txt

md.txt has two sections describing the 'level' sysfs attribute, and some of
the text is out-of-date.  So make just one section, and make it right.

Cc: Christian Kujau <evil@g-house.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: make messages about resync/recovery etc more specific
NeilBrown [Tue, 3 Oct 2006 08:15:57 +0000 (01:15 -0700)]
[PATCH] md: make messages about resync/recovery etc more specific

It is possible to request a 'check' of an md/raid array where the whole array
is read and consistancies are reported.

This uses the same mechanisms as 'resync' and so reports in the kernel logs
that a resync is being started.  This understandably confuses/worries people.

Also the text in /proc/mdstat suggests a 'resync' is happen when it is just a
check.

This patch changes those messages to be more specific about what is happening.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: add a ->congested_fn function for raid5/6
NeilBrown [Tue, 3 Oct 2006 08:15:56 +0000 (01:15 -0700)]
[PATCH] md: add a ->congested_fn function for raid5/6

This is very different from other raid levels and all requests go through a
'stripe cache', and it has congestion management already.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: define ->congested_fn for raid1, raid10, and multipath
NeilBrown [Tue, 3 Oct 2006 08:15:54 +0000 (01:15 -0700)]
[PATCH] md: define ->congested_fn for raid1, raid10, and multipath

raid1, raid10 and multipath don't report their 'congested' status through
bdi_*_congested, but should.

This patch adds the appropriate functions which just check the 'congested'
status of all active members (with appropriate locking).

raid1 read_balance should be modified to prefer devices where
bdi_read_congested returns false.  Then we could use the '&' branch rather
than the '|' branch.  However that should would need some benchmarking first
to make sure it is actually a good idea.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear
NeilBrown [Tue, 3 Oct 2006 08:15:53 +0000 (01:15 -0700)]
[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear

Each backing_dev needs to be able to report whether it is congested, either by
modulating BDI_*_congested in ->state, or by defining a ->congested_fn.
md/raid did neither of these.  This patch add a congested_fn which simply
checks all component devices to see if they are congested.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: Improve locking around error handling
NeilBrown [Tue, 3 Oct 2006 08:15:53 +0000 (01:15 -0700)]
[PATCH] md: Improve locking around error handling

The error handling routines don't use proper locking, and so two concurrent
errors could trigger a problem.

So:
  - use test-and-set and test-and-clear to synchonise
    the In_sync bits with the ->degraded count
  - use the spinlock to protect updates to the
    degraded count (could use an atomic_t but that
    would be a bigger change in code, and isn't
    really justified)
  - remove un-necessary locking in raid5

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: Remove working_disks from raid1 state data
NeilBrown [Tue, 3 Oct 2006 08:15:52 +0000 (01:15 -0700)]
[PATCH] md: Remove working_disks from raid1 state data

It is equivalent to conf->raid_disks - conf->mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: Factor out part of raid1d into a separate function
NeilBrown [Tue, 3 Oct 2006 08:15:51 +0000 (01:15 -0700)]
[PATCH] md: Factor out part of raid1d into a separate function

raid1d has toooo many nested block, so take the fix_read_error functionality
out into a separate function.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: remove unnecessary variable x in stripe_to_pdidx()
Coywolf Qi Hunt [Tue, 3 Oct 2006 08:15:50 +0000 (01:15 -0700)]
[PATCH] md: remove unnecessary variable x in stripe_to_pdidx()

Signed-off-by: Coywolf Qi Hunt <qiyong@freeforge.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: new sysfs interface for setting bits in the write-intent-bitmap
Paul Clements [Tue, 3 Oct 2006 08:15:49 +0000 (01:15 -0700)]
[PATCH] md: new sysfs interface for setting bits in the write-intent-bitmap

Add a new sysfs interface that allows the bitmap of an array to be dirtied.
The interface is write-only, and is used as follows:

echo "1000" > /sys/block/md2/md/bitmap

(dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk
bitmaps of array md2)

echo "1000-2000" > /sys/block/md1/md/bitmap

(dirty the bits for chunks 1000-2000 in md1's bitmap)

This is useful, for example, in cluster environments where you may need to
combine two disjoint bitmaps into one (following a server failure, after a
secondary server has taken over the array).  By combining the bitmaps on
the two servers, a full resync can be avoided (This was discussed on the
list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: remove 'working_disks' from raid10 state
NeilBrown [Tue, 3 Oct 2006 08:15:48 +0000 (01:15 -0700)]
[PATCH] md: remove 'working_disks' from raid10 state

It isn't needed as mddev->degraded contains equivalent info.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] md: remove the working_disks and failed_disks from raid5 state data.
NeilBrown [Tue, 3 Oct 2006 08:15:47 +0000 (01:15 -0700)]
[PATCH] md: remove the working_disks and failed_disks from raid5 state data.

They are not needed.  conf->failed_disks is the same as mddev->degraded and
conf->working_disks is conf->raid_disks - mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>