drm/i915/execlists: Reorder execlists register enabling

Empirically we restart following a GPU reset more successfully if we call
lrc_init_hws() (which contains a posting read) last. (The failure mode
that was observed was that breadcrumb writes into the HWS from the
recovered requests went astray leading to the context-switch maintaining
forward progress, but the requests not being retired/completed.)

For clarity, lrc_init_hws() is inlined (and the unused function then
removed).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-3-chris@chris-wilson.co.uk

drm/i915: Assert that we do create the deferred context

In order to convince static analyzers that the allocation function
returns an error or sets ce->state, assert that it is set afterwards.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-2-chris@chris-wilson.co.uk

drm/i915: Assert all timeline requests are gone before fini

During i915_gem_timeline_fini(), assert that all the timeline's request
are completed and removed from the timeline.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-1-chris@chris-wilson.co.uk

drm/i915: Revoke fenced GTT mmapings across GPU reset

The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.

v2: Fix up commentary.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: enable FBC on gen9+ too

Gen9+ platforms have been seeing a lot of screen flickerings and
underruns, so I never felt comfortable in enabling FBC on these
platforms since I didn't want to throw yet another feature on top of
the already complex problem. We now have code that automatically
disables FBC if we ever get an underrun, and the screen flickerings
seem to be mostly gone, so it may be a good time to try to finally
enable FBC by default on the newer platforms.

Besides, BDW FBC has been working fine over the year, which gives me a
little more confidence now.

For a little more information, please refer to commit a98ee79317b4
("drm/i915/fbc: enable FBC by default on HSW and BDW").

v2: Enable not only on SKL, but for everything new (Daniel).
v3: Rebase after the intel_sanitize_fbc_option() change.
v4: New rebase after 8 months, drop expired R-B tags.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482495839-27041-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: actually drive the BDW reserved IDs

Back in 2014, commit fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI
IDs.") added the reserved PCI IDs in order to try to make sure we had
working drivers in case we ever released products using these IDs
(since we had instances of this type of problem in the past). The
problem is that the patch only touched the macros used by
early-quirks.c and by the user space components that rely on
i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we
correctly handled the stolen memory for these theoretical IDs, but we
didn't actually drive the devices from i915.ko.

So this patch fixes the original commit by actually making i915.ko
drive these IDs, which was the goal. There's no information on what
would be the GT count on these IDs, so we just go with the safer
intel_broadwell_info, at the risk of ignoring a possibly inexistent
BSD2_RING.

I did some checking, and it seems that these IDs are driven by
intel-gpu-tools, xf86-video-intel and libdrm (since they contain old
copies of i915_pciids.h), but they are not checked by mesa.

The alternative to this patch would be to just assume we're actually
never going to use these IDs, and then remove them from our ID lists
and make sure our user space components sync the latest i915_pciids.h
copy. I'm fine with either approaches, as long as we make sure that
every component tries to drive the same list of PCI IDs.

Fixes: fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI IDs.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.com

drm/i915: more .is_mobile cleanups for BDW

Commit 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform
struct") removed mobile vs desktop differences for HSW+, but forgot
the Broadwell reserved IDs, so do it now.

It's interesting to notice that these IDs are used by early-quirks.c
but are *not* used by i915_pci.c.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-2-git-send-email-paulo.r.zanoni@intel.com

drm/i915: fix INTEL_BDW_IDS definition

Remove duplicated IDs from the list. Currently, this definition is
only used by early-quirks.c. From my understanding of the code, having
duplicated IDs shouldn't be causing any bugs.

Fixes: 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform struct")
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-1-git-send-email-paulo.r.zanoni@intel.com

Merge tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc into drm-intel-next-queued

Directly merge drm-misc into drm-intel since Dave is on vacation and
we need the various drm-misc patches (fb format rework, drm mm fixes,
selftest framework and others). Also pulled back -rc2 in first to
resync with drm-intel-fixes and make sure I can reuse the exact rerere
solutions from drm-tip for safety, and because I'm lazy.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge tag 'v4.10-rc2' into drm-intel-next-queued

Backmerge Linux 4.10-rc2 to resync with our -fixes cherry-picks. I've
done the backmerge directly because Dave is on vacation.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Update comment that sets I915_MODE_FLAG_INHERITED

The code was moved, but the comment not updated. It confused me.

Fixes: 7f4c62840cc4 ("drm/i915: Assign hwmode after encoder state readout")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219082423.27798-6-daniel.vetter@ffwll.ch

drm/i915: Update SKL SRV GT4 pci ids reference.

No functional changes. Apparently spec has been changed
the valid table showing 0x192A as Server GT4
while 0x193A is Server GT4e.

Libdrm and Mesa already have this right. So let's fix the ref here.

Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483471672-10450-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Initialize num_scalers for skl and glk too

After commit 1c74eeaf16b8 ("drm/i915: Move number of scalers initialization to
runtime init"), scalers are not initialized properly for skl and glk
since num_scalers is left as 0 for those platforms.

Fixes: 1c74eeaf16b8 ("drm/i915: Move number of scalers initialization to runtime init")
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483365281-10569-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Update comment in vlv_set_rps_idle()

Ville explained that the wakelock was being acquired during set-idle in
order to flush the voltage change from the punit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102152845.32352-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/guc: Make intel_guc_recv static.

This function is only used by intel_guc_send() and it doesn't
need to be exposed outside of intel_uc.o file. Also when defined
as static, compiler will generate smaller code. Additionally let
it take guc param instead dev_priv to match function name.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220115531.76120-1-michal.wajdeczko@intel.com

drm/i915: Move number of scalers initialization to runtime init

In future patches, we require greater flexibility in describing
the number of scalers available on each CRTC. To ease that transition
we move the current assignment to intel_device_info.

Scaler structure initialisation is done if scaler is available on the CRTC.
Gen9 check is not required as on depending upon numbers of scalers we
initialize scalers or return without doing anything in skl_init_scalers.

v3: Changed skl_init_scaler to intel_crtc_init_scalers

v2: Added Chris's comments.

Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480398794-22741-1-git-send-email-nabendu.bikash.maiti@intel.com

drm/i915: Move intel_atomic_get_shared_dpll_state() to intel_dpll_mgr.c

The function intel_atomic_get_shared_dpll_state() is only called from
intel_dpll_mgr.c and it concerns the same data structures as the other
functions in that file, so move it there and make it static.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-8-git-send-email-ander.conselvan.de.oliveira@intel.com

Linux 4.10-rc2

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull DAX updates from Dan Williams:
 "The completion of Jan's DAX work for 4.10.

  As I mentioned in the libnvdimm-for-4.10 pull request, these are some
  final fixes for the DAX dirty-cacheline-tracking invalidation work
  that was merged through the -mm, ext4, and xfs trees in -rc1. These
  patches were prepared prior to the merge window, but we waited for
  4.10-rc1 to have a stable merge base after all the prerequisites were
  merged.

  Quoting Jan on the overall changes in these patches:

     "So I'd like all these 6 patches to go for rc2. The first three
      patches fix invalidation of exceptional DAX entries (a bug which
      is there for a long time) - without these patches data loss can
      occur on power failure even though user called fsync(2). The other
      three patches change locking of DAX faults so that ->iomap_begin()
      is called in a more relaxed locking context and we are safe to
      start a transaction there for ext4"

  These have received a build success notification from the kbuild
  robot, and pass the latest libnvdimm unit tests. There have not been
  any -next releases since -rc1, so they have not appeared there"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  ext4: Simplify DAX fault path
  dax: Call ->iomap_begin without entry lock during dax fault
  dax: Finish fault completely when loading holes
  dax: Avoid page invalidation races and unnecessary radix tree traversals
  mm: Invalidate DAX radix tree entries only if appropriate
  ext2: Return BH_New buffers for zeroed blocks

drm/i915: Drop kerneldoc markup from non-kerneldoc enum drrs_refresh_rate_type

DRRS is not yet kerneldoc despite the allusion prior to enum
drrs_refresh_rate_type. Drop the '**' to avoid the warnings from
make htmldocs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-4-chris@chris-wilson.co.uk

drm/i915: Complete kerneldoc for struct i915_gem_context

The existing kerneldoc was outdated, so time for a refresh.

v2: Use single line kdoc, mention functions for manipulation

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-3-chris@chris-wilson.co.uk

drm/i915: Fix kerneldoc for i915_gem_object_pin_map()

Parameter - no.
Parameter: yes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-2-chris@chris-wilson.co.uk

drm/i915: Move assert of page pin vs bind count into i915_vma_unbind

The read of the page pin count and the bind count are unordered,
presenting races in the assert and it firing off incorrectly. Prevent
this by restricting the assert to the vma bind/unbind routines where we
have local cpu ordering between the two.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-1-chris@chris-wilson.co.uk

Merge tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "Two small fixes:

   - A merge error on my part broke the DocBook build. I've
     requisitioned one of tglx's frozen sharks for appropriate
     disciplinary action and resolved to be more careful about testing
     the DocBook stuff as long as it's still around.

   - Fix an error in unaligned-memory-access.txt"

* tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux:
  Documentation/unaligned-memory-access.txt: fix incorrect comparison operator
  docs: Fix build failure

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "This fixes a boot failure on some platforms when crypto self test is
  enabled along with the new acomp interface"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: testmgr - Use heap buffer for acomp test input

drm/i915: Add dpll entrypoint for dumping hw state

Remove the IS_PLATFORM() macros from intel_dump_pipe_config() and split
that logic in platform specific implementations inside the dpll code,
accessed through a platform independent interface.

v2: Rebase.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-7-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Update kerneldoc for intel_dpll_mgr.c

The documentation for most of the non-static members and structs were
missing. Fix that.

v2: Fix typos (Durga)

v3: Rebase.
    Fix make docs warnings.
    Document more.

v4: capitilize CRTC; say that the prepare hook is a nop if the DPLL is
    already enabled; link to struct intel_dpll_hw_state from @hw_state
    field in struct intel_shared_dpll_state; reorganize DPLL flags; link
    intel_shared_dpll_state to other structs and functions. (Daniel)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-6-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Rename intel_shared_dpll->mode_set() to prepare()

The hook is called from intel_prepare_shared_dpll(). The name doesn't
make sense after all the changes to modeset code. So just call it
prepare.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-5-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Rename intel_shared_dpll_config to intel_shared_dpll_state

Struct intel_shared_dpll_config is used to hold the state of the DPLL in
the "atomic" sense, so call it state like everything else atomic.

v2: Rebase
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-4-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Rename intel_shared_dpll_commit() to _swap_state()

The function intel_shared_dpll_commit() performs the equivalent of
drm_atomic_helper_swap_state() for the shared dpll state, which is not
handled by the helpers. So make it do a full swap of the state and
rename it for consistency.

v2: Fix typo in the commit message. (Durga)
v3: Rebase.
v4: Swap the states instead of just renaming the function. (Daniel)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com> (v2)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v3)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-3-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Introduce intel_release_shared_dpll()

While the details of getting a shared dpll are wrapped by
intel_get_shared_dpll(), the release was still hand rolled into the
modeset code. Fix that by creating an entry point for releasing the
pll and move that code there.

v2: Take old_dpll from crtc->state instead of crtc_state. (CI)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-2-git-send-email-ander.conselvan.de.oliveira@intel.com

mm/filemap: fix parameters to test_bit()

 mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
  mm/filemap.c:933:9: error: too few arguments to function 'test_bit'
    return test_bit(PG_waiters);
         ^~~~~~~~

Fixes: b91e1302ad9b ('mm: optimize PageWaiters bit use for unlock_page()')
Signed-off-by: Olof Johansson <olof@lixom.net>
Brown-paper-bag-by: Linus Torvalds <dummy@duh.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: optimize PageWaiters bit use for unlock_page()

In commit 62906027091f ("mm: add PageWaiters indicating tasks are
waiting for a page bit") Nick Piggin made our page locking no longer
unconditionally touch the hashed page waitqueue, which not only helps
performance in general, but is particularly helpful on NUMA machines
where the hashed wait queues can bounce around a lot.

However, the "clear lock bit atomically and then test the waiters bit"
sequence turns out to be much more expensive than it needs to be,
because you get a nasty stall when trying to access the same word that
just got updated atomically.

On architectures where locking is done with LL/SC, this would be trivial
to fix with a new primitive that clears one bit and tests another
atomically, but that ends up not working on x86, where the only atomic
operations that return the result end up being cmpxchg and xadd.  The
atomic bit operations return the old value of the same bit we changed,
not the value of an unrelated bit.

On x86, we could put the lock bit in the high bit of the byte, and use
"xadd" with that bit (where the overflow ends up not touching other
bits), and look at the other bits of the result.  However, an even
simpler model is to just use a regular atomic "and" to clear the lock
bit, and then the sign bit in eflags will indicate the resulting state
of the unrelated bit #7.

So by moving the PageWaiters bit up to bit #7, we can atomically clear
the lock bit and test the waiters bit on x86 too.  And architectures
with LL/SC (which is all the usual RISC suspects), the particular bit
doesn't matter, so they are fine with this approach too.

This avoids the extra access to the same atomic word, and thus avoids
the costly stall at page unlock time.

The only downside is that the interface ends up being a bit odd and
specialized: clear a bit in a byte, and test the sign bit.  Nick doesn't
love the resulting name of the new primitive, but I'd rather make the
name be descriptive and very clear about the limitation imposed by
trying to work across all relevant architectures than make it be some
generic thing that doesn't make the odd semantics explicit.

So this introduces the new architecture primitive

    clear_bit_unlock_is_negative_byte();

and adds the trivial implementation for x86.  We have a generic
non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)"
combination) which can be overridden by any architecture that can do
better.  According to Nick, Power has the same hickup x86 has, for
example, but some other architectures may not even care.

All these optimizations mean that my page locking stress-test (which is
just executing a lot of small short-lived shell scripts: "make test" in
the git source tree) no longer makes our page locking look horribly bad.
Before all these optimizations, just the unlock_page() costs were just
over 3% of all CPU overhead on "make test".  After this, it's down to
0.66%, so just a quarter of the cost it used to be.

(The difference on NUMA is bigger, but there this micro-optimization is
likely less noticeable, since the big issue on NUMA was not the accesses
to 'struct page', but the waitqueue accesses that were already removed
by Nick's earlier commit).

Acked-by: Nick Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm: Add kerneldoc markup for new @scan parameters in drm_mm

A couple of parameters slipped through the kerneldoc net.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161228105120.14500-1-chris@chris-wilson.co.uk

drm/mm: Document locking rules

Drivers need to take care. Motivated by a discussion between Mark and
Rob on dri-devel.

Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/alloc|freeing/modifications/ per Chris' suggestion.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482833457-29592-1-git-send-email-daniel.vetter@ffwll.ch

drm: Use drm_mm_insert_node_in_range_generic() for everyone

Remove a superfluous helper as drm_mm_insert_node is equivalent to
insert_node_in_range with a range of [0, U64_MAX].

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-37-chris@chris-wilson.co.uk

drm: Apply range restriction after color adjustment when allocation

mm->color_adjust() compares the hole with its neighbouring nodes. They
only abutt before we restrict the hole, so we have to apply color_adjust
before we apply the range restriction.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-36-chris@chris-wilson.co.uk

drm: Wrap drm_mm_node.hole_follows

Insulate users from changes to the internal hole tracking within
struct drm_mm_node by using an accessor for hole_follows.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: resolve conflicts in i915_vma.c]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Apply tight eviction scanning to color_adjust

Using mm->color_adjust makes the eviction scanner much tricker since we
don't know the actual neighbours of the target hole until after it is
created (after scanning is complete). To work out whether we need to
evict the neighbours because they impact upon the hole, we have to then
check the hole afterwards - requiring an extra step in the user of the
eviction scanner when they apply color_adjust.

v2: Massage kerneldoc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-34-chris@chris-wilson.co.uk

drm: Simplify drm_mm scan-list manipulation

Since we mandate a strict reverse-order of drm_mm_scan_remove_block()
after drm_mm_scan_add_block() we can further simplify the list
manipulations when generating the temporary scan-hole.

v2: Highlight the games being played with the lists to track the scan
holes without allocation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-33-chris@chris-wilson.co.uk

drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable

Add an assertion to the plain i915_ggtt_offset() to double check that
any offset we hand to the GuC is outside of its unmappable ranges.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161224193146.4402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>

drm: Optimise power-of-two alignments in drm_mm_scan_add_block()

For power-of-two alignments, we can avoid the 64bit divide and do a
simple bitwise add instead.

v2: s/alignment_mask/remainder_mask/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-32-chris@chris-wilson.co.uk

drm: Compute tight evictions for drm_mm_scan

Compute the minimal required hole during scan and only evict those nodes
that overlap. This enables us to reduce the number of nodes we need to
evict to the bare minimum.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-31-chris@chris-wilson.co.uk

drm: Fix application of color vs range restriction when scanning drm_mm

The range restriction should be applied after the color adjustment, or
else we may inadvertently apply the color adjustment to the restricted
hole (and not against its neighbours).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-30-chris@chris-wilson.co.uk

drm: Unconditionally do the range check in drm_mm_scan_add_block()

Doing the check is trivial (low cost in comparison to overall eviction)
and helps simplify the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-29-chris@chris-wilson.co.uk

drm: Rename prev_node to hole in drm_mm_scan_add_block()

Acknowledging that we were building up the hole was more useful to me
when reading the code, than knowing the relationship between this node
and the previous node.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-28-chris@chris-wilson.co.uk

drm: Fix O= out-of-tree builds for selftests

Kbuild really doesn't like non-recursive Makefiles, but they do work
as long as you build without O=

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 50f0033d1a0f ("drm: Add some kselftests for the DRM range manager (struct drm_mm)")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482918077-30027-1-git-send-email-daniel.vetter@ffwll.ch

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "This fixes a hash corruption bug in the marvell driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: marvell - Copy IVDIG before launching partial DMA ahash requests

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar.

    The most important is to not assume the packet is RX just because
    the destination address matches that of the device. Such an
    assumption causes problems when an interface is put into loopback
    mode.

 2) If we retry when creating a new tc entry (because we dropped the
    RTNL mutex in order to load a module, for example) we end up with
    -EAGAIN and then loop trying to replay the request. But we didn't
    reset some state when looping back to the top like this, and if
    another thread meanwhile inserted the same tc entry we were trying
    to, we re-link it creating an enless loop in the tc chain. Fix from
    Daniel Borkmann.

 3) There are two different WRITE bits in the MDIO address register for
    the stmmac chip, depending upon the chip variant. Due to a bug we
    could set them both, fix from Hock Leong Kweh.

 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: stmmac: fix incorrect bit set in gmac4 mdio addr register
  r8169: add support for RTL8168 series add-on card.
  net: xdp: remove unused bfp_warn_invalid_xdp_buffer()
  openvswitch: upcall: Fix vlan handling.
  ipv4: Namespaceify tcp_tw_reuse knob
  net: korina: Fix NAPI versus resources freeing
  net, sched: fix soft lockup in tc_classify
  net/mlx4_en: Fix user prio field in XDP forward
  tipc: don't send FIN message from connectionless socket
  ipvlan: fix multicast processing
  ipvlan: fix various issues in ipvlan_process_multicast()

Documentation/unaligned-memory-access.txt: fix incorrect comparison operator

In the actual implementation ether_addr_equal function tests for equality to 0
when returning. It seems in commit 0d74c4 it is somehow overlooked to change
this operator to reflect the actual function.

Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: Fix build failure

The 80211.tmpl DocBook file was removed in commit 819bf593767c ("docs-rst:
sphinxify 802.11 documentation"), but the 80211.xml target was re-added to
the Makefile by commit 7ddedebb03b7 ("ALSA: doc: ReSTize
writing-an-alsa-driver document"), leading to a failure when building the
documentation:

*** No rule to make target 'Documentation/DocBook/80211.xml', needed by
'Documentation/DocBook/80211.aux.xml'.

cc: stable@vger.kernel.org
Signed-off-by: John Brooks <john@fastquake.com>
Mea-culpa-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge tag 'v4.10-rc1' into docs-next

Linux 4.10-rc1

net: stmmac: fix incorrect bit set in gmac4 mdio addr register

Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of
OR together with MII_WRITE.

Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add support for RTL8168 series add-on card.

This chip is the same as RTL8168, but its device id is 0x8161.

Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: xdp: remove unused bfp_warn_invalid_xdp_buffer()

After commit 73b62bd085f4737679ea9afc7867fa5f99ba7d1b ("virtio-net:
remove the warning before XDP linearizing"), there's no users for
bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for
commit f23bc46c30ca5ef58b8549434899fcbac41b2cfc.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: upcall: Fix vlan handling.

Networking stack accelerate vlan tag handling by
keeping topmost vlan header in skb. This works as
long as packet remains in OVS datapath. But during
OVS upcall vlan header is pushed on to the packet.
When such packet is sent back to OVS datapath, core
networking stack might not handle it correctly. Following
patch avoids this issue by accelerating the vlan tag
during flow key extract. This simplifies datapath by
bringing uniform packet processing for packets from
all code paths.

Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets").
CC: Jarno Rajahalme <jarno@ovn.org>
CC: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Namespaceify tcp_tw_reuse knob

Different namespaces might have different requirements to reuse
TIME-WAIT sockets for new connections. This might be required in
cases where different namespace applications are in place which
require TIME_WAIT socket connections to be reduced independently
of the host.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm: Extract struct drm_mm_scan from struct drm_mm

The scan state occupies a large proportion of the struct drm_mm and is
rarely used and only contains temporary state. That makes it suitable to
moving to its struct and onto the stack of the callers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Fix up etnaviv to compile, was missing a BUG_ON.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()

A simple assert to ensure that we don't overflow start + size when
initialising the drm_mm, or its scanner.

In future, we may want to switch to tracking the value of ranges (rather
than size) so that we can cover the full u64, for example like resource
tracking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-26-chris@chris-wilson.co.uk

drm: Simplify drm_mm_clean()

Since commit ea7b1dd44867 ("drm: mm: track free areas implicitly"),
to test whether there are any nodes allocated within the range manager,
we merely have to ask whether the node_list is empty.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-25-chris@chris-wilson.co.uk

drm: Detect overflow in drm_mm_reserve_node()

Protect ourselves from a caller passing in node.start + node.size that
will overflow and trick us into reserving that node.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-24-chris@chris-wilson.co.uk

drm: Fix kerneldoc for drm_mm_scan_remove_block()

The nodes must be removed in the *reverse* order. This is correct in the
overview, but backwards in the function description. Whilst here add
Intel's copyright statement and tweak some formatting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-23-chris@chris-wilson.co.uk

drm: Promote drm_mm alignment to u64

In places (e.g. i915.ko), the alignment is exported to userspace as u64
and there now exists hardware for which we can indeed utilize a u64
alignment. As such, we need to keep 64bit integers throughout when
handling alignment.

Testcase: igt/drm_mm/align64
Testcase: igt/gem_exec_alignment
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-22-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and restricted color eviction

Check that after applying the driver's color adjustment, restricted
eviction scanning finds a suitable hole.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-20-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and color eviction

Check that after applying the driver's color adjustment, eviction
scanning finds a suitable hole.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-19-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and color adjustment

Check that after applying the driver's color adjustment, fitting of the
node and its alignment are still correct.

v2: s/no_color_touching/separate_adjacent_colors/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-18-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and top-down allocation

Check that if we request top-down allocation from drm_mm_insert_node()
we receive the next available hole from the top.

v2: Flip sign on conditional assert.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-17-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and range restricted eviction

Check that we add arbitrary blocks to a restrited eviction scanner in
order to find the first minimal hole that matches our request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-16-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and eviction

Check that we add arbitrary blocks to the eviction scanner in order to
find the first minimal hole that matches our request.

v2: Refactor out some common eviction code for later

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-15-chris@chris-wilson.co.uk

drm: kselftest for drm_mm and alignment

Check that we can request alignment to any power-of-two or prime using a
plain drm_mm_node_insert(), and also handle a reasonable selection of
primes.

v2: Exercise all allocation flags

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-14-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_insert_node_in_range()

Exercise drm_mm_insert_node_in_range(), check that we only allocate from
the specified range.

v2: Use all allocation flags
v3: Don't pass in invalid ranges - these will be asserted later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-13-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_replace_node()

Reuse drm_mm_insert_node() with a temporary node to exercise
drm_mm_replace_node(). We use the previous test in order to exercise the
various lists following replacement.

v2: Check that we copy across the important (user) details of the node.
The internal details (such as lists and hole tracking) we hope to detect
errors by exercise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-12-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_insert_node()

Exercise drm_mm_insert_node(), check that we can't overfill a range and
that the lists are correct after reserving/removing.

v2: Extract helpers for the repeated tests
v3: Iterate over all allocation flags

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-11-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_reserve_node()

Exercise drm_mm_reserve_node(), check that we can't reserve an already
occupied range and that the lists are correct after reserving/removing.

v2: Check for invalid node reservation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-10-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_debug()

Simple test to just exercise calling the debug dumper on the drm_mm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-9-chris@chris-wilson.co.uk

drm: kselftest for drm_mm_init()

Simple first test to just exercise initialisation of struct drm_mm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-8-chris@chris-wilson.co.uk

drm: Add some kselftests for the DRM range manager (struct drm_mm)

First we introduce a smattering of infrastructure for writing selftests.
The idea is that we have a test module that exercises a particular
portion of the exported API, and that module provides a set of tests
that can either be run as an ensemble via kselftest or individually via
an igt harness (in this case igt/drm_mm). To accommodate selecting
individual tests, we export a boolean parameter to control selection of
each test - that is hidden inside a bunch of reusable boilerplate macros
to keep writing the tests simple.

v2: Choose a random random_seed unless one is specified by the user.
v3: More parameters to control max_iterations and max_prime of the
tests.

Testcase: igt/drm_mm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-7-chris@chris-wilson.co.uk

drm: Add a simple generator of random permutations

When testing, we want a random but yet reproducible order in which to
process elements. Here we create an array which is a random (using the
Tausworthe PRNG) permutation of the order in which to execute.

Note these are simple helpers intended to be merged upstream in lib/

v2: Tidier code by David Herrmann
v3: Add reminder that this code is intended to be temporary, with at
least the bulk of the prandom changes going to lib/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk

lib: Add a simple prime number generator

Prime numbers are interesting for testing components that use multiplies
and divides, such as testing DRM's struct drm_mm alignment computations.

v2: Move to lib/, add selftest
v3: Fix initial constants (exclude 0/1 from being primes)
v4: More RCU markup to keep 0day/sparse happy
v5: Fix RCU unwind on module exit, add to kselftests
v6: Tidy computation of bitmap size
v7: for_each_prime_number_from()
v8: Compose small-primes using BIT() for easier verification
v9: Move rcu dance entirely into callers.
v10: Improve quote for Betrand's Postulate (aka Chebyshev's theorem)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222144514.3911-1-chris@chris-wilson.co.uk

drm: Compile time enabling for asserts in drm_mm

Use CONFIG_DRM_DEBUG_MM to conditionally enable the internal and
validation checking using BUG_ON. Ideally these paths should all be
exercised by CI selftests (with the asserts enabled).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-4-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-4-chris@chris-wilson.co.uk

drm: Use drm_mm_nodes() as shorthand for the list of nodes under struct drm_mm

Fairly commonly we want to inspect the node list on the struct drm_mm,
which is buried within an embedded node. Bring it to the surface with a
bit of syntatic sugar.

Note this was intended to be split from commit ad579002c8ec ("drm: Add
drm_mm_for_each_node_safe()") before being applied, but my timing sucks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-3-chris@chris-wilson.co.uk

drm: Get atomic property value even if DRIVER_ATOMIC is not set

i915 does not set DRIVER_ATOMIC by default yet but uses atomic_check and
atomic_commit. drm_object_property_get_value() does not read the correct
value of atomic properties if DRIVER_ATOMIC is not set. Checking whether
the driver uses atomic modeset is a better check instead as the property
values are tracked in the state structures.

v2: Included header

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-2-git-send-email-dhinakaran.pandiyan@intel.com

drm: Wrap the check for atomic_commit implementation

This check is useful for drivers that do not have DRIVER_ATOMIC set but
have atomic modesetting internally implemented. Wrap the check into a
function since this is used in many places and as a bonus, the function
name helps to document what the check is for.

v2:
Change return type to bool (Ville)
Move the function drm_atomic.h (Daniel)
Fixed comment marker for documentation

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[danvet: Move back to drmP.h because include hell.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-1-git-send-email-dhinakaran.pandiyan@intel.com

crypto: testmgr - Use heap buffer for acomp test input

Christopher Covington reported a crash on aarch64 on recent Fedora
kernels:

kernel BUG at ./include/linux/scatterlist.h:140!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted 4.9.0-11815-ge93b1cc #162
Hardware name: linux,dummy-virt (DT)
task: ffff80007c650080 task.stack: ffff800008910000
PC is at sg_init_one+0xa0/0xb8
LR is at sg_init_one+0x24/0xb8
...
[<ffff000008398db8>] sg_init_one+0xa0/0xb8
[<ffff000008350a44>] test_acomp+0x10c/0x438
[<ffff000008350e20>] alg_test_comp+0xb0/0x118
[<ffff00000834f28c>] alg_test+0x17c/0x2f0
[<ffff00000834c6a4>] cryptomgr_test+0x44/0x50
[<ffff0000080dac70>] kthread+0xf8/0x128
[<ffff000008082ec0>] ret_from_fork+0x10/0x50

The test vectors used for input are part of the kernel image. These
inputs are passed as a buffer to sg_init_one which eventually blows up
with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns
false for the kernel image since virt_to_page will not return the
correct page. Fix this by copying the input vectors to heap buffer
before setting up the scatterlist.

Reported-by: Christopher Covington <cov@codeaurora.org>
Fixes: d7db7a882deb ("crypto: acomp - update testmgr with support for acomp")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ext4: Simplify DAX fault path

Now that dax_iomap_fault() calls ->iomap_begin() without entry lock, we
can use transaction starting in ext4_iomap_begin() and thus simplify
ext4_dax_fault(). It also provides us proper retries in case of ENOSPC.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: Call ->iomap_begin without entry lock during dax fault

Currently ->iomap_begin() handler is called with entry lock held. If the
filesystem held any locks between ->iomap_begin() and ->iomap_end()
(such as ext4 which will want to hold transaction open), this would cause
lock inversion with the iomap_apply() from standard IO path which first
calls ->iomap_begin() and only then calls ->actor() callback which grabs
entry locks for DAX (if it faults when copying from/to user provided
buffers).

Fix the problem by nesting grabbing of entry lock inside ->iomap_begin()
- ->iomap_end() pair.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: Finish fault completely when loading holes

The only case when we do not finish the page fault completely is when we
are loading hole pages into a radix tree. Avoid this special case and
finish the fault in that case as well inside the DAX fault handler. It
will allow us for easier iomap handling.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: Avoid page invalidation races and unnecessary radix tree traversals

Currently dax_iomap_rw() takes care of invalidating page tables and
evicting hole pages from the radix tree when write(2) to the file
happens. This invalidation is only necessary when there is some block
allocation resulting from write(2). Furthermore in current place the
invalidation is racy wrt page fault instantiating a hole page just after
we have invalidated it.

So perform the page invalidation inside dax_iomap_actor() where we can
do it only when really necessary and after blocks have been allocated so
nobody will be instantiating new hole pages anymore.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

mm: Invalidate DAX radix tree entries only if appropriate

Currently invalidate_inode_pages2_range() and invalidate_mapping_pages()
just delete all exceptional radix tree entries they find. For DAX this
is not desirable as we track cache dirtiness in these entries and when
they are evicted, we may not flush caches although it is necessary. This
can for example manifest when we write to the same block both via mmap
and via write(2) (to different offsets) and fsync(2) then does not
properly flush CPU caches when modification via write(2) was the last
one.

Create appropriate DAX functions to handle invalidation of DAX entries
for invalidate_inode_pages2_range() and invalidate_mapping_pages() and
wire them up into the corresponding mm functions.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: Return BH_New buffers for zeroed blocks

So far we did not return BH_New buffers from ext2_get_blocks() when we
allocated and zeroed-out a block for DAX inode to avoid racy zeroing in
DAX code. This zeroing is gone these days so we can remove the
workaround.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

x86/mce/AMD: Make the init code more robust

If mce_device_init() fails then the mce device pointer is NULL and the
AMD mce code happily dereferences it.

Add a sanity check.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smp/hotplug: Undo tglxs brainfart

The attempt to prevent overwriting an active state resulted in a
disaster which effectively disables all dynamically allocated hotplug
states.

Cleanup the mess.

Fixes: dc280d936239 ("cpu/hotplug: Prevent overwriting of callbacks")
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: don't pull uaccess.h into *.S

Split asm-only parts of arm64 uaccess.h into a new header and use that
from *.S.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

net: korina: Fix NAPI versus resources freeing

Commit beb0babfb77e ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been
called:

Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.

Fixes: beb0babfb77e ("korina: disable napi on close and restart")
Reported-by: Alexandros C. Couloumbis <alex@ozo.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net, sched: fix soft lockup in tc_classify

Shahar reported a soft lockup in tc_classify(), where we run into an
endless loop when walking the classifier chain due to tp->next == tp
which is a state we should never run into. The issue only seems to
trigger under load in the tc control path.

What happens is that in tc_ctl_tfilter(), thread A allocates a new
tp, initializes it, sets tp_created to 1, and calls into tp->ops->change()
with it. In that classifier callback we had to unlock/lock the rtnl
mutex and returned with -EAGAIN. One reason why we need to drop there
is, for example, that we need to request an action module to be loaded.

This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning
after we loaded and found the requested action, we need to redo the
whole request so we don't race against others. While we had to unlock
rtnl in that time, thread B's request was processed next on that CPU.
Thread B added a new tp instance successfully to the classifier chain.
When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN
and destroying its tp instance which never got linked, we goto replay
and redo A's request.

This time when walking the classifier chain in tc_ctl_tfilter() for
checking for existing tp instances we had a priority match and found
the tp instance that was created and linked by thread B. Now calling
again into tp->ops->change() with that tp was successful and returned
without error.

tp_created was never cleared in the second round, thus kernel thinks
that we need to link it into the classifier chain (once again). tp and
*back point to the same object due to the match we had earlier on. Thus
for thread B's already public tp, we reset tp->next to tp itself and
link it into the chain, which eventually causes the mentioned endless
loop in tc_classify() once a packet hits the data path.

Fix is to clear tp_created at the beginning of each request, also when
we replay it. On the paths that can cause -EAGAIN we already destroy
the original tp instance we had and on replay we really need to start
from scratch. It seems that this issue was first introduced in commit
12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining
and avoid kernel panic when we use cls_cgroup").

Fixes: 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup")
Reported-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/i915: Update DRIVER_DATE to 20161226

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Linux 4.10-rc1

powerpc: Fix build warning on 32-bit PPC

I am getting the following warning when I build kernel 4.9-git on my
PowerBook G4 with a 32-bit PPC processor:

    AS      arch/powerpc/kernel/misc_32.o
  arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef]

This problem is evident after commit 989cea5c14be ("kbuild: prevent
lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an
error that has been in the code since 2005 when this source file was
created.  That was with commit 9994a33865f4 ("powerpc: Introduce
entry_{32,64}.S, misc_{32,64}.S, systbl.S").

The offending line does not make a lot of sense.  This error does not
seem to cause any errors in the executable, thus I am not recommending
that it be applied to any stable versions.

Thanks to Nicholas Piggin for suggesting this solution.

Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

avoid spurious "may be used uninitialized" warning

The timer type simplifications caused a new gcc warning:

  drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’:
  drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));

despite the actual use of "time_start" not having changed in any way.
It appears that simply changing the type of ktime_t from a union to a
plain scalar type made gcc check the use.

The variable wasn't actually used uninitialized, but gcc apparently
failed to notice that the conditional around the use was exactly the
same as the conditional around the initialization of that variable.

Add an unnecessary initialization just to shut up the compiler.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer type cleanups from Thomas Gleixner:
 "This series does a tree wide cleanup of types related to
  timers/timekeeping.

   - Get rid of cycles_t and use a plain u64. The type is not really
     helpful and caused more confusion than clarity

   - Get rid of the ktime union. The union has become useless as we use
     the scalar nanoseconds storage unconditionally now. The 32bit
     timespec alike storage got removed due to the Y2038 limitations
     some time ago.

     That leaves the odd union access around for no reason. Clean it up.

  Both changes have been done with coccinelle and a small amount of
  manual mopping up"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ktime: Get rid of ktime_equal()
  ktime: Cleanup ktime_set() usage
  ktime: Get rid of the union
  clocksource: Use a plain u64 instead of cycle_t