GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
12 years agoNFC: Purge LLCP socket Tx queues when being disconnected
Samuel Ortiz [Fri, 26 Oct 2012 16:20:10 +0000 (18:20 +0200)]
NFC: Purge LLCP socket Tx queues when being disconnected

The Tx queues are no longer valid when we receive a disconnection or when
the LLCP link goes down. In the later case we also purge the entire local
Tx queue.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL from the NCI Makefile
Kees Cook [Tue, 23 Oct 2012 20:04:11 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL from the NCI Makefile

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL from the LLCP Makefile
Kees Cook [Tue, 23 Oct 2012 20:04:10 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL from the LLCP Makefile

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL
Kees Cook [Tue, 23 Oct 2012 20:04:09 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix some code style and whitespace issues
Szymon Janc [Wed, 17 Oct 2012 13:23:39 +0000 (15:23 +0200)]
NFC: Fix some code style and whitespace issues

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use IDR library to assing NFC devices IDs
Samuel Ortiz [Mon, 22 Oct 2012 13:57:58 +0000 (15:57 +0200)]
NFC: Use IDR library to assing NFC devices IDs

As a consequence the NFC device IDs won't be increasing all the time,
as IDR provides the first available ID.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: pn533: Remove unused arg parameter
Waldemar Rymarkiewicz [Thu, 11 Oct 2012 12:04:01 +0000 (14:04 +0200)]
NFC: pn533: Remove unused arg parameter

Get rid of unused arg param in pn533_init_target_complete and
in pn533_start_poll_complete.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: pn533: Fix in/out frame buffer allocation
Waldemar Rymarkiewicz [Thu, 11 Oct 2012 12:03:58 +0000 (14:03 +0200)]
NFC: pn533: Fix in/out frame buffer allocation

Max frame size should be 264 bytes as per spec and not limited to
endpoint MaxPacketSize which is 64 in my case (acr122 reader).

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Return NULL when no LLCP socket for a dsap,ssap couple is found
Samuel Ortiz [Tue, 16 Oct 2012 19:15:59 +0000 (21:15 +0200)]
NFC: Return NULL when no LLCP socket for a dsap,ssap couple is found

The previous code was always returning the last socket from the
LLCP socket list.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement LLCP connection less Tx path
Samuel Ortiz [Tue, 16 Oct 2012 13:04:10 +0000 (15:04 +0200)]
NFC: Implement LLCP connection less Tx path

It simply involves getting the client dsap and ssap and calling the UI
frame building and sending routine.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: UI frame sending routine implementation
Samuel Ortiz [Tue, 16 Oct 2012 13:01:40 +0000 (15:01 +0200)]
NFC: UI frame sending routine implementation

UI frames still need to follow the MIU rule, and they need to use the
client passed dsap as the listening socket dsap is stuck on SDP.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Forward LLCP datagrams to userspace
Samuel Ortiz [Mon, 15 Oct 2012 15:44:44 +0000 (17:44 +0200)]
NFC: Forward LLCP datagrams to userspace

With connection less PDUs we have to send the SSAP and DSAP as well.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Handle LLCP UI frames
Samuel Ortiz [Mon, 15 Oct 2012 14:14:37 +0000 (16:14 +0200)]
NFC: Handle LLCP UI frames

UI (Unnumbered Information) frames are used for sending data over
connection less links.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Keep connection less bound sockets alive when DEP link goes down
Samuel Ortiz [Mon, 15 Oct 2012 13:09:52 +0000 (15:09 +0200)]
NFC: Keep connection less bound sockets alive when DEP link goes down

When DEP goes down, bound cl sockets can be kept alive as there is no
reason to kill a connection less server socket because the LLCP link
went down.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Check for connection less sockets when looking for a service name
Samuel Ortiz [Mon, 15 Oct 2012 13:08:29 +0000 (15:08 +0200)]
NFC: Check for connection less sockets when looking for a service name

Connection less server sockets will be in BOUND state, not LISTEN.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Reserve LLCP ssap when replying to an SNL frame
Samuel Ortiz [Mon, 15 Oct 2012 12:28:13 +0000 (14:28 +0200)]
NFC: Reserve LLCP ssap when replying to an SNL frame

Replying to an SNL (Service Name Lookup) means that the other end of
the link can now rely on our answer (Which is an ssap) and thus we have
to reserve it.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix sparse warnings due to missing static
Arron Wang [Mon, 8 Oct 2012 06:54:39 +0000 (14:54 +0800)]
NFC: Fix sparse warnings due to missing static

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix style issues with logical operations
Szymon Janc [Thu, 4 Oct 2012 13:15:51 +0000 (15:15 +0200)]
NFC: Fix style issues with logical operations

Logical continuations should be on the previous line.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix not propagating return code in nfc_hci_clear_all_pipes
Szymon Janc [Thu, 4 Oct 2012 13:15:49 +0000 (15:15 +0200)]
NFC: Fix not propagating return code in nfc_hci_clear_all_pipes

Return code from nfc_hci_execute_cmd was not propagated to caller.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Small nfc_hci_create_pipe refactoring
Szymon Janc [Thu, 4 Oct 2012 13:15:48 +0000 (15:15 +0200)]
NFC: Small nfc_hci_create_pipe refactoring

Check for error and return if any. This makes it easier to see what is
a 'positive' function flow.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove unneeded LLCP function return calls
Szymon Janc [Thu, 4 Oct 2012 13:15:47 +0000 (15:15 +0200)]
NFC: Remove unneeded LLCP function return calls

There is no need for return statement at the end of function returning
void.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove not needed local variable in nci_set_local_general_bytes
Szymon Janc [Thu, 4 Oct 2012 13:15:46 +0000 (15:15 +0200)]
NFC: Remove not needed local variable in nci_set_local_general_bytes

No need for local rc variable as result of nci_request can be returned
directly.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytes
Szymon Janc [Thu, 4 Oct 2012 13:15:45 +0000 (15:15 +0200)]
NFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytes

local_gb is of size NFC_MAX_GT_LEN and len is used as index for it.
Check len against this instead of NCI_MAX_PARAM_LEN before accessing
local_gb.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add NFC_ATTR_RF_MODE when sending device netlink properties
Thierry Escande [Fri, 5 Oct 2012 09:19:58 +0000 (11:19 +0200)]
NFC: Add NFC_ATTR_RF_MODE when sending device netlink properties

This is useful when getting devices to know if they're in target or
initiator mode.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Set rf_mode to NFC_RF_NONE where necessary
Thierry Escande [Fri, 5 Oct 2012 09:05:45 +0000 (11:05 +0200)]
NFC: Set rf_mode to NFC_RF_NONE where necessary

rf_mode is now set to NFC_RF_NONE when a device gets allocated,
when the link goes down, and when stop polling.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Initial SNL support
Samuel Ortiz [Thu, 4 Oct 2012 23:21:47 +0000 (01:21 +0200)]
NFC: Initial SNL support

SNL (Service Name Lookup) allows for LLCP peers to map service names with
SAPs. This is mandatory for connection less support as peers need to get
the right SAPs without sending the CONNECT frame.
Here we only support the Rx part of SNL. The Tx one will be implemented
when supporting connection less LLCP sockets.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add SNL frame building routine
Samuel Ortiz [Thu, 4 Oct 2012 23:13:24 +0000 (01:13 +0200)]
NFC: Add SNL frame building routine

SNL (Service Name Lookup) frames are used to respond to SNL requests.
This is needed for SDP implementation.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use llcp_allocate_pdu to build the DISC frames
Samuel Ortiz [Thu, 4 Oct 2012 23:09:07 +0000 (01:09 +0200)]
NFC: Use llcp_allocate_pdu to build the DISC frames

We no longer need to be atomic as this is only called from
llcp_sock_release().

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Avoid falling back to SYMM when sk is NULL
Samuel Ortiz [Thu, 4 Oct 2012 22:37:22 +0000 (00:37 +0200)]
NFC: Avoid falling back to SYMM when sk is NULL

In some cases (SNL, DISC, DM) we need to send an LLCP skbs without
having a sock owning it. I frames are an exception here since
they may be requeued to the llcp_sock queue.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Separate pn544 hci driver in HW dependant and independant parts
Eric Lapuyade [Tue, 2 Oct 2012 16:44:06 +0000 (18:44 +0200)]
NFC: Separate pn544 hci driver in HW dependant and independant parts

The driver now has all HCI stuff isolated in one file, and all the
hardware link specifics in another. Writing a pn544 driver on top of
another hardware link is now just a matter of adding a new file for that
new hardware specifics.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: HCI check presence must not fail when driver doesn't support it
Eric Lapuyade [Tue, 2 Oct 2012 15:27:36 +0000 (17:27 +0200)]
NFC: HCI check presence must not fail when driver doesn't support it

When the driver does not support checking the tag is still present, it
must return -EOPNOTSUPP. The NFC Core will then stop asking and not
report a tag lost event to user space.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add pn544 presence check for different targets
Arron Wang [Thu, 27 Sep 2012 09:32:59 +0000 (17:32 +0800)]
NFC: Add pn544 presence check for different targets

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement HCI DEP send and receive data
Arron Wang [Thu, 27 Sep 2012 09:32:58 +0000 (17:32 +0800)]
NFC: Implement HCI DEP send and receive data

And implement the corresponding hooks for pn544.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement HCI DEP link up and down
Arron Wang [Thu, 27 Sep 2012 09:32:57 +0000 (17:32 +0800)]
NFC: Implement HCI DEP link up and down

And implement the corresponding hooks for pn544.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Handle pn544 continue activation
Arron Wang [Thu, 27 Sep 2012 09:32:56 +0000 (17:32 +0800)]
NFC: Handle pn544 continue activation

We need to send continue activation command to allow NFCIP-1
activation when a NFC target has been discovered in type A or
type F reader gate.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Pass hardware specific HCI event to driver
Arron Wang [Thu, 27 Sep 2012 09:32:55 +0000 (17:32 +0800)]
NFC: Pass hardware specific HCI event to driver

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Set local gb and DEP registries
Arron Wang [Thu, 27 Sep 2012 09:32:54 +0000 (17:32 +0800)]
NFC: Set local gb and DEP registries

Set the local general bytes and default value for NFCIP1
Target/Initiator registries if the protocol is NFC-DEP

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville [Tue, 23 Oct 2012 15:41:46 +0000 (11:41 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless

Conflicts:
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
net/mac80211/mlme.c

12 years agobrcm80211: remove some truely barftastic code
Alan Cox [Thu, 11 Oct 2012 16:25:14 +0000 (17:25 +0100)]
brcm80211: remove some truely barftastic code

It's not used or called but please make it go away before someone copies or
uses it

Signed-off-by: Alan "minus lunch" Cox <alan@linux.intel.com>
Acked-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove 'always false' condition from brcmf_c_mkiovar_bsscfg
Arend van Spriel [Wed, 10 Oct 2012 18:13:11 +0000 (11:13 -0700)]
brcmfmac: remove 'always false' condition from brcmf_c_mkiovar_bsscfg

The parameter buflen is unsigned so the condition buflen < 0 is
always false. The patch fixes the if statement checking the buffer
length.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: fix sparse warnings
Franky Lin [Wed, 10 Oct 2012 18:13:08 +0000 (11:13 -0700)]
brcmfmac: fix sparse warnings

Following sparse warning is fixed:
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:2518:21: warning: symbol 'brcmf_find_wpaie' was not declared. Should it be static?
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3768:1: warning: symbol 'brcmf_set_management_ie' was not declared. Should it be static?

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: Using zero instead of NULL
Dan Carpenter [Wed, 10 Oct 2012 18:13:07 +0000 (11:13 -0700)]
brcmfmac: Using zero instead of NULL

Sparse complains that we use zero instead of NULL here.  In fact, the
initialization is wrong and should be removed.  Doing these kinds of
bogus initializations means that GCC can't detect unitialized variables
and leads to bugs.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: perform ANI cycle in idle state
Rajkumar Manoharan [Wed, 10 Oct 2012 17:33:02 +0000 (23:03 +0530)]
ath9k: perform ANI cycle in idle state

As of now the ANI cycle is executed only when the chip is awake.
On idle state case, the station wakes up from network sleep for
beacon reception. Since most of the time, ANI cycle is not syncing
with beacon wakeup, ANI cycle is ignored. Approx 5 mins once, the
calibration is performed. This could affect the connection stability
when the station is idle for long. Even though the OFDM and CCK phy
error rates are too high, ANI is unable to tune its immunity level
as quick enough due to rare execution.

Here the experiment shows that OFDM and CCK levels are at default
even on higher phy error rate.

listenTime=44 OFDM:3 errs=121977/s CCK:2 errs=440818/s ofdm_turn=1

This change ensures that ANI calibration will be exectued atleast
once for every 10 seconds. The below result shows improvements and
immunity levels are adopted quick enough.

listenTime=557 OFDM:4 errs=752/s CCK:4 errs=125/s ofdm_turn=0

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocarl9170: handle traps from firmware loader
Christian Lamparter [Sat, 6 Oct 2012 18:42:54 +0000 (20:42 +0200)]
carl9170: handle traps from firmware loader

This patch changes the way the driver deals with
command responses and traps which are sent through
the special interrupt input endpoint 3.

While the carl9170 firmware does not use this
endpoint for command responses or traps, the
firmware loader on the device does. It uses it
to notify the host about 'watchdog triggered'
in case the firmware/hardware has crashed.

Note:
Even without this patch, the driver is still
able to detect the mishap and reset the device.
But previously it did that because the trap
event caused an out-of-order message sequence
number error, which also triggered a reset.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: Using %*phD instead of print_hex_dump_bytes
Andrei Emeltchenko [Fri, 5 Oct 2012 20:57:49 +0000 (13:57 -0700)]
mwifiex: Using %*phD instead of print_hex_dump_bytes

Make output more readable and remove unneeded function call.

...
mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
last_cmd_id: 00000000: 16 00 cd 00 83 00 df 00 28 00 ........(.
...

would be changed to:

...
mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
mwifiex_sdio mmc1:0001:1: last_cmd_id: 16 00 cd 00 83 00 df 00 28 00
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: use sizeof(array) to print_hex_dump_bytes
Bing Zhao [Fri, 5 Oct 2012 20:57:48 +0000 (13:57 -0700)]
mwifiex: use sizeof(array) to print_hex_dump_bytes

DBG_CMD_NUM is the number of commands, not the actual bytes of
data for printing.

Also remove the duplicated DBG_CMD_NUM definition.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: comment tx power settings
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:15 +0000 (13:44 +0200)]
rt2800: comment tx power settings

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: allow to reduce tx power on devices not exporting power limit
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:14 +0000 (13:44 +0200)]
rt2800: allow to reduce tx power on devices not exporting power limit

Some rt2800 devices don't have their calibrated max eirp tx power in
their calibration data. For those devices reduce tx power according to
difference between regulatory max channel power and requested tx power.

This patch is based on Helmut Schaa work.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: pass channel pointer to rt2800_config_txpower
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:13 +0000 (13:44 +0200)]
rt2800: pass channel pointer to rt2800_config_txpower

Preparation for use regulatory max channel power in TX power delta
calculations.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: use eeprom OFDM 6M TX power as criterion
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:12 +0000 (13:44 +0200)]
rt2800: use eeprom OFDM 6M TX power as criterion

Don use TX_PWR_CFG_0 register value of OFDM 6M tx power as criterion
since it can be changed. The same do vendor driver (see
AsicAdjustSingleSkuTxPower and AsicGetTxPowerOffset functions from
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO).

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: compensate tx power also for non 11b rates on 2GHz
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:11 +0000 (13:44 +0200)]
rt2800: compensate tx power also for non 11b rates on 2GHz

We skip compensate calculation for non 11b rates on 2.4GHz band. I do
not see that on vendor driver
(2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO).

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: limit TX_PWR_CFG_ values to 0xc
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:10 +0000 (13:44 +0200)]
rt2800: limit TX_PWR_CFG_ values to 0xc

Based on AsicAdjustTxPower function from vendor driver
(2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO)
limit per rate TX power values we program into TX_PWR_CFG_ registers.

Note that on some configurations (devices/rates) is allowed to use
bigger values than 0xc, but we use safe maximum value for now. Further
work need to be done to allow use bigger values than 0xc.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2800: use BBP_R1 for setting tx power
Stanislaw Gruszka [Fri, 5 Oct 2012 11:44:09 +0000 (13:44 +0200)]
rt2800: use BBP_R1 for setting tx power

TX power delta can be negative. TX_PWR_CFG_ registers allow to set delta
only in range between 0 dBm and 15 dBm (4 bits for each rate). Se we
need to use BBP_R1 to configure negative deltas.

Not utilize +6 dBm increasing BBP_R1 option for safety reason. For now,
this can be used for devices, which export maximum allowed TX power
value.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath_hw: Use common REG_WRITE parameter order
Sven Eckelmann [Thu, 4 Oct 2012 17:43:15 +0000 (19:43 +0200)]
ath_hw: Use common REG_WRITE parameter order

All defines for REG_WRITE in Atheros wireless drivers use the order "ah",
"register" and "value". hw.c is the only file using the order "ah", "value" and
"register".

drivers/net/wireless/ath/ath9k/hw.h:#define REG_WRITE(_ah, _reg, _val) \
drivers/net/wireless/ath/key.c:#define REG_WRITE(_ah, _reg, _val) (common->ops->write)(_ah, _val, _reg)

This inconsistent definition can easily lead to implementation errors. The
modification doesn't change the behavior of the driver or the generated code.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agortlwifi: rtl8192ce: rtl8192cu: use %*phC to dump small buffers
Andy Shevchenko [Tue, 2 Oct 2012 14:19:44 +0000 (17:19 +0300)]
rtlwifi: rtl8192ce: rtl8192cu: use %*phC to dump small buffers

The patch changes a bit trace output format in the rtl_cam_program_entry() to
print prefix and the actual data on the same line. Moreover the %*phC outputs
each byte as 2 hex digits, which is slightly different to the original %x.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoorinoco_usb: clean up some signedness issues
Dan Carpenter [Tue, 2 Oct 2012 08:32:34 +0000 (11:32 +0300)]
orinoco_usb: clean up some signedness issues

In ezusb_read_ltv() we had a comparison "(bufsize < 0)" which was never
true because bufsize was unsigned.  I looked at the implications of
that.  If we passed a negative number to ezusb_access_ltv() then it
would be used as the size parameter of the memcpy() because that
function uses min_t(int, exp_len, ans_size).

But fortunately when I looked at the callers, bufsize is not controlled
by the user and it's never negative.  So these signedness mistakes have
no impact.

I removed the always false check from ezusb_read_ltv() and I changed the
types in ezusb_access_ltv() and made the variables unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: do not initialize deactivated PCIe cores
Hauke Mehrtens [Sun, 30 Sep 2012 22:12:54 +0000 (00:12 +0200)]
bcma: do not initialize deactivated PCIe cores

Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath/ath9k/ar9003_eeprom.c: Remove semicolon after if
Peter Senna Tschudin [Wed, 10 Oct 2012 16:38:17 +0000 (18:38 +0200)]
ath/ath9k/ar9003_eeprom.c: Remove semicolon after if

This patch remove a semicolon after if(...) that is preventing the
error check to work correctly. Removing this semicolon will change the
code behavior, but this is intended.

The semantic patch that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
position p;
@@
if (...);@p

@script:python@
p0 << r1.p;
@@
// Emacs org-mode output
cocci.print_main("", p0)
cocci.print_secs("", p0)
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Fix BT_OP_SCAN usage
Sujith Manoharan [Sun, 30 Sep 2012 03:33:37 +0000 (09:03 +0530)]
ath9k: Fix BT_OP_SCAN usage

BT_OP_SCAN is applicable only for pre-MCI WLAN/BT combo chips
and using it for MCI-based cards is incorrect. Fix this by
cleaning up its usage.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Use a helper routine for MCI/FTP tuning
Sujith Manoharan [Sun, 30 Sep 2012 03:33:20 +0000 (09:03 +0530)]
ath9k: Use a helper routine for MCI/FTP tuning

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: add an extra pcie core struct
Hauke Mehrtens [Sat, 29 Sep 2012 18:40:18 +0000 (20:40 +0200)]
bcma: add an extra pcie core struct

The BCM4706 has two PCIe host controller on the bcma bus. For PCIe
client mode it is assumed that there is only one PCIe controller so the
PCIe driver, like b43 and brcmsmac are accessing the first PCIe
controller when they want to issue a operation on the host controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: use fallback sprom if sprom on card was not valid
Hauke Mehrtens [Sat, 29 Sep 2012 18:38:11 +0000 (20:38 +0200)]
bcma: use fallback sprom if sprom on card was not valid

Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

This is the case for the PCIe cards in my ASUS RT-N66U (BCM4706 + 2
times BCM4331) and I have heard of someone having the same problem with
an other PCIe card connected to an other Broadcom SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agossb: add attribute to indicate a parallel flash is available
Hauke Mehrtens [Sat, 29 Sep 2012 18:36:18 +0000 (20:36 +0200)]
ssb: add attribute to indicate a parallel flash is available

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agossb: move parallel flash config into an own struct
Hauke Mehrtens [Sat, 29 Sep 2012 18:36:17 +0000 (20:36 +0200)]
ssb: move parallel flash config into an own struct

This is a preparing step for adding serial flash support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: add some more flash chips for serial flash
Hauke Mehrtens [Sat, 29 Sep 2012 18:33:53 +0000 (20:33 +0200)]
bcma: add some more flash chips for serial flash

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: extract drv_cc in bcma_core_mips_flash_detect()
Hauke Mehrtens [Sat, 29 Sep 2012 18:33:52 +0000 (20:33 +0200)]
bcma: extract drv_cc in bcma_core_mips_flash_detect()

This makes the code more readable

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: mark nflash if it is the boot flash
Hauke Mehrtens [Sat, 29 Sep 2012 18:33:51 +0000 (20:33 +0200)]
bcma: mark nflash if it is the boot flash

There are some devices which are able to boot from nand flash and other
are using a serial flash for booting. Add a bool to indicate that the
device is booted from that flash chip and not from some other chip also
connected to the SoC. This is needed to find the nvram, as it is stored
on the flash the devices booted from.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: add and use constants for the flash windows
Hauke Mehrtens [Sat, 29 Sep 2012 18:33:50 +0000 (20:33 +0200)]
bcma: add and use constants for the flash windows

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: mark pflash as present when available
Hauke Mehrtens [Sat, 29 Sep 2012 18:33:49 +0000 (20:33 +0200)]
bcma: mark pflash as present when available

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: init sprom struct earlier
Hauke Mehrtens [Sat, 29 Sep 2012 18:29:50 +0000 (20:29 +0200)]
bcma: init sprom struct earlier

The PCIe host driver and the chip common initialisation accesses the
sprom struct, but it is not initialized when these functions are run.
Move the sprom parsing up in to do it earlier.
As we need the chip common core rev and some other attributes from the
chip common core, the early initialization is done before accessing the
sprom.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: just do the necessary things in early register on SoCs
Hauke Mehrtens [Sat, 29 Sep 2012 18:29:49 +0000 (20:29 +0200)]
bcma: just do the necessary things in early register on SoCs

Some parts of the initialization for chip common and the pcie core are
accessing the sprom struct, but it is not initialized at that stage.
Just do the necessary thing in the early register on SoCs and not the
complete initialization to read out the nvram from the flash chip.
After it is possible to read out the nvram, the sprom should be parsed
from it and the full initialization of the cores should be run.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi...
John W. Linville [Fri, 19 Oct 2012 19:48:17 +0000 (15:48 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac802...
John W. Linville [Fri, 19 Oct 2012 19:36:53 +0000 (15:36 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211-next

12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth...
John W. Linville [Fri, 19 Oct 2012 19:22:27 +0000 (15:22 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/bluetooth/bluetooth-next

12 years agomac80211: make client powersave independent of interface type
Marco Porsch [Wed, 10 Oct 2012 19:39:50 +0000 (12:39 -0700)]
mac80211: make client powersave independent of interface type

This patch prepares mac80211 for a later implementation of mesh or
ad-hoc powersave clients.
The structures related to powersave (buffer, TIM map, counters) are
moved from the AP-specific interface structure to a generic structure
that can be embedded into any interface type.
The functions related to powersave are prepared to allow easy
extension with different interface types. For example with:

+ } else if (sta->sdata->vif.type == NL80211_IFTYPE_MESH_POINT) {
+         ps = &sdata->u.mesh.ps;

Some references to the AP's beacon structure are removed where they
were obviously not used.

The patch compiles without warning and has been briefly tested as AP
interface with one client in PS mode.

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl/cfg80211: force scan using an AP vif if requested
Antonio Quartulli [Tue, 16 Oct 2012 06:39:22 +0000 (08:39 +0200)]
nl/cfg80211: force scan using an AP vif if requested

If the user wants to scan using a vif configured as AP,
cfg80211 must give him a chance to do it, even if this
will disrupt the stations performance due to off-channel
scanning. To do so, this patch adds a 'force' flag to the
SCAN_TRIGGER command which tells cfg80211 to perform the
scanning operation even if the vif is an AP and the
beaconing has already started.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoBluetooth: AMP: Get amp_mgr reference in HS hci_conn
Andrei Emeltchenko [Thu, 18 Oct 2012 10:16:19 +0000 (13:16 +0300)]
Bluetooth: AMP: Get amp_mgr reference in HS hci_conn

When assigning amp_mgr in hci_conn (type AMP_LINK) get also reference.
In hci_conn_del those references would be put for both conn types
AMP_LINK and ACL_LINK associated with amp_mgr.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agocfg80211: add cfg80211 exported function tracing
Beni Lev [Mon, 27 Aug 2012 09:49:39 +0000 (12:49 +0300)]
cfg80211: add cfg80211 exported function tracing

Also add tracing to the API functions that drivers
(and mac80211) can call in cfg80211.

Signed-off-by: Beni Lev <beni.lev@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add tracing to rdev-ops
Beni Lev [Tue, 31 Jul 2012 15:48:27 +0000 (18:48 +0300)]
cfg80211: add tracing to rdev-ops

Add tracing to make debugging cfg80211/mac80211
(or full-mac driver) interaction easier.

Signed-off-by: Beni Lev <beni.lev@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Hila Gonen <hila.gonen@intel.com>
Tested-by: Hila Gonen <hila.gonen@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[add a cast to int to sizeof() to avoid warning]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add wrappers for registered_device_ops
Hila Gonen [Wed, 27 Jun 2012 14:19:42 +0000 (17:19 +0300)]
cfg80211: add wrappers for registered_device_ops

This will allow adding central tracing like in mac80211.

Signed-off-by: Hila Gonen <hila.gonen@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: Disallow HT/WEP in IBSS mode
Sujith Manoharan [Thu, 18 Oct 2012 04:49:28 +0000 (10:19 +0530)]
cfg80211: Disallow HT/WEP in IBSS mode

Currently, a user is allowed to choose a HT operating channel
with WEP when creating an IBSS network. WEP is not allowed
in HT configuration - this patch ensures that such requests
are denied.

Signed-off-by: Sujith Manoharan <c_manoha@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: fix copy-paste typo in Kconfig
Marco Porsch [Thu, 18 Oct 2012 03:21:30 +0000 (20:21 -0700)]
mac80211: fix copy-paste typo in Kconfig

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: use __printf attribute in debugfs
Johannes Berg [Sun, 30 Sep 2012 15:12:45 +0000 (17:12 +0200)]
mac80211: use __printf attribute in debugfs

The internal function mac80211_format_buffer() has a
printf-style argument list, so add the attribute to
have gcc verify that list.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove some unused code
Johannes Berg [Sun, 30 Sep 2012 15:08:35 +0000 (17:08 +0200)]
mac80211: remove some unused code

There are a number of unused variables that gcc
pointed out (when building with W=1) as well as
some conditions that can never be true due to
the datatypes used: unsigned values can't be
less than zero. Remove this code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove unimplemented mesh vendor sync
Johannes Berg [Sun, 30 Sep 2012 15:07:19 +0000 (17:07 +0200)]
mac80211: remove unimplemented mesh vendor sync

There's no vendor-specific mesh sync implemented
and there don't need to be dummy handlers that
only print messages, so remove that code. While
at it, also constify the mesh sync ops.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: remove duplicate enum ieee80211_eid definitions
Arend van Spriel [Fri, 12 Oct 2012 10:28:16 +0000 (12:28 +0200)]
wireless: remove duplicate enum ieee80211_eid definitions

WLAN_EID_WPA and WLAN_EID_GENERIC mapped to the same value
as WLAN_EID_VENDOR_SPECIFIC. The last one being more in line
with the standard specification. Removing WLAN_EID_WPA and
WLAN_EID_GENERIC as there are no longer drivers using these.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: gelic: make use of WLAN_EID_VENDOR_SPECIFIC
Arend van Spriel [Fri, 12 Oct 2012 10:28:15 +0000 (12:28 +0200)]
wireless: gelic: make use of WLAN_EID_VENDOR_SPECIFIC

The include file linux/ieee80211.h contains three definitions for
the same thing in enum ieee80211_eid due to historic changes:

    /* Information Element IDs */
    enum ieee80211_eid {
        :
        WLAN_EID_WPA = 221,
        WLAN_EID_GENERIC = 221,
        WLAN_EID_VENDOR_SPECIFIC = 221,
        :
    };

The standard refers to this as "vendor specific" element so the
other two definitions are better not used. This patch changes the
wireless drivers to use one definition, ie. WLAN_EID_VENDOR_SPECIFIC.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: drivers: make use of WLAN_EID_VENDOR_SPECIFIC
Arend van Spriel [Fri, 12 Oct 2012 10:28:14 +0000 (12:28 +0200)]
wireless: drivers: make use of WLAN_EID_VENDOR_SPECIFIC

The include file linux/ieee80211.h contains three definitions for
the same thing in enum ieee80211_eid due to historic changes:

/* Information Element IDs */
enum ieee80211_eid {
    :
    WLAN_EID_WPA = 221,
    WLAN_EID_GENERIC = 221,
    WLAN_EID_VENDOR_SPECIFIC = 221,
    :
};

The standard refers to this as "vendor specific" element so the
other two definitions are better not used. This patch changes the
wireless drivers to use one definition, ie. WLAN_EID_VENDOR_SPECIFIC.

Cc: Jouni Malinen <j@w1.fi>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl]
Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex]
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> [ipw2x00]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
[change libipw as well]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: Notify new IBSS network creation
Sujith Manoharan [Fri, 12 Oct 2012 12:05:45 +0000 (17:35 +0530)]
mac80211: Notify new IBSS network creation

Initialization of beacon transmission in IBSS mode depends
on whether a new BSS is being created or joined. When joining
an existing IBSS network, beaconing has to start only after
a TSF-sync has happened - this is explained in 11.1.4.

Introduce a new parameter in the BSS information structure to
indicate creator/joiner mode.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: add support for tx to abort low priority scan requests
Sam Leffler [Fri, 12 Oct 2012 04:03:35 +0000 (21:03 -0700)]
mac80211: add support for tx to abort low priority scan requests

Use NL80211_SCAN_FLAG_LOW_PRIORITY flag in mac80211's scan state
machine to prematurely terminate scan operations if outbound
traffic collides. This is useful for marking background scans so
they don't affect throughput.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
[set feature flag only if software scan is used]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add support for flushing old scan results
Sam Leffler [Fri, 12 Oct 2012 04:03:34 +0000 (21:03 -0700)]
cfg80211: add support for flushing old scan results

Add an NL80211_SCAN_FLAG_FLUSH flag that causes old bss cache
entries to be flushed on scan completion. This is useful for
collecting guaranteed fresh scan/survey result (e.g. on resume).

For normal scan, flushing only happens on successful completion
of a scan; i.e. it does not happen if the scan is aborted.
For scheduled scan, previous scan results are flushed everytime
when we get new scan results.

This feature is enabled by default. Drivers can disable it by
unsetting the NL80211_FEATURE_SCAN_FLUSH flag.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
[invert polarity of feature flag to account for old kernels]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: use OR operation to set wiphy features
Johannes Berg [Fri, 12 Oct 2012 08:55:53 +0000 (10:55 +0200)]
wireless: use OR operation to set wiphy features

The next patch will introduce a flag that is set
by default in cfg80211 so drivers and mac80211
need to use |= to set features they have so that
they don't clear the already-set feature.

We could set the flag in wiphy_register() instead
of wiphy_new() to avoid this patch, but then the
drivers couldn't *unset* flags they don't want to
use even though the implementation is generic.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add scan flag to indicate its priority
Sam Leffler [Fri, 12 Oct 2012 04:03:32 +0000 (21:03 -0700)]
cfg80211: add scan flag to indicate its priority

Add NL80211_SCAN_FLAG_LOW_PRIORITY flag support. It tells drivers
that this is a low priority scan request, so that they can take
necessary action.
Drivers need to advertise low priority scan capability during
registration.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: code rearrangement to avoid forward declarations
Amitkumar Karwar [Fri, 12 Oct 2012 04:03:33 +0000 (21:03 -0700)]
cfg80211: code rearrangement to avoid forward declarations

bss_release() and __cfg80211_unlink_bss() function definitions
are moved at the begining of the file. They are used in next
patch in this series.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years ago{nl,cfg}80211: add a flags word to scan requests
Sam Leffler [Fri, 12 Oct 2012 04:03:31 +0000 (21:03 -0700)]
{nl,cfg}80211: add a flags word to scan requests

Add a flags word to direct and scheduled scan requests; it will
be used for control of optional behaviours such as flushing the
bss cache prior to doing a scan.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
John W. Linville [Wed, 17 Oct 2012 20:23:33 +0000 (16:23 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211

12 years agomac80211: connect with HT20 if HT40 is not permitted
Johannes Berg [Mon, 1 Oct 2012 13:52:00 +0000 (15:52 +0200)]
mac80211: connect with HT20 if HT40 is not permitted

Some changes to fix issues with HT40 APs in Korea
and follow-up changes to allow using HT40 even if
the local regulatory database disallows it caused
issues with iwlwifi (and could cause issues with
other devices); iwlwifi firmware would assert if
you tried to connect to an AP that has an invalid
configuration (e.g. using HT40- on channel 140.)

Fix this, while avoiding the "Korean AP" issue by
disabling HT40 and advertising HT20 to the AP
when connecting.

Cc: stable@vger.kernel.org [3.6]
Reported-by: Florian Reitmeir <florian@reitmeir.org>
Tested-by: Florian Reitmeir <florian@reitmeir.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years ago{nl,cfg}80211: Peer STA VHT caps
Mahesh Palivela [Thu, 11 Oct 2012 08:04:52 +0000 (08:04 +0000)]
{nl,cfg}80211: Peer STA VHT caps

To save STAs VHT caps in AP mode

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: VHT peer STA caps
Mahesh Palivela [Wed, 10 Oct 2012 11:33:04 +0000 (11:33 +0000)]
mac80211: VHT peer STA caps

Save the AP's VHT capabilities (in managed
mode) and make them available to the driver
in the station information.

Unlike HT capabilities, they aren't restricted
to the common capabilities, so drivers must be
aware of their own capabilities.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
[fix endian conversion bug ...]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoieee80211: Rename VHT cap struct
Mahesh Palivela [Wed, 10 Oct 2012 11:25:40 +0000 (11:25 +0000)]
ieee80211: Rename VHT cap struct

Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap
and renamed its member vht_capabilities_info to vht_cap_info.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>