GitHub/exynos8895/android_kernel_samsung_universal8895.git
13 years agonet: fix NULL dereferences in check_peer_redir()
Eric Dumazet [Fri, 29 Jul 2011 19:00:53 +0000 (19:00 +0000)]
net: fix NULL dereferences in check_peer_redir()

Gergely Kalman reported crashes in check_peer_redir().

It appears commit f39925dbde778 (ipv4: Cache learned redirect
information in inetpeer.) added a race, leading to possible NULL ptr
dereference.

Since we can now change dst neighbour, we should make sure a reader can
safely use a neighbour.

Add RCU protection to dst neighbour, and make sure check_peer_redir()
can be called safely by different cpus in parallel.

As neighbours are already freed after one RCU grace period, this patch
should not add typical RCU penalty (cache cold effects)

Many thanks to Gergely for providing a pretty report pointing to the
bug.

Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Clear MDIO access warning during first driver load
Yaniv Rosner [Tue, 2 Aug 2011 23:00:12 +0000 (23:00 +0000)]
bnx2x: Clear MDIO access warning during first driver load

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM578xx MAC test
Yaniv Rosner [Tue, 2 Aug 2011 23:00:06 +0000 (23:00 +0000)]
bnx2x: Fix BCM578xx MAC test

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM54618se invalid link indication
Yaniv Rosner [Tue, 2 Aug 2011 23:00:00 +0000 (23:00 +0000)]
bnx2x: Fix BCM54618se invalid link indication

After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM84833 link
Yaniv Rosner [Tue, 2 Aug 2011 22:59:53 +0000 (22:59 +0000)]
bnx2x: Fix BCM84833 link

BCM84833 fail to link due to incorrect auto-negotiation setting.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix link issue with DAC over 578xx
Yaniv Rosner [Tue, 2 Aug 2011 22:59:47 +0000 (22:59 +0000)]
bnx2x: Fix link issue with DAC over 578xx

Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix LED behavior
Yaniv Rosner [Tue, 2 Aug 2011 22:59:40 +0000 (22:59 +0000)]
bnx2x: Fix LED behavior

This fix resolve two problems seen regarding LED:
1. LED doesn't flash during port identification.
2. Traffic LED sometimes do not blink.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM578xx-B0 MDIO access
Yaniv Rosner [Tue, 2 Aug 2011 22:59:32 +0000 (22:59 +0000)]
bnx2x: Fix BCM578xx-B0 MDIO access

Fix MDIO access to Warpcore on new chip version of 578xx.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix remote fault handling
Yaniv Rosner [Tue, 2 Aug 2011 22:59:25 +0000 (22:59 +0000)]
bnx2x: Fix remote fault handling

Fix couple of issues of remote fault detection and handling:
Link may go down due to remote fault indications during link establishment.
Possible link down after primary function migration.
Remote fault was not detected on 578xx.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix chip hanging due to TX pipe stall.
Yaniv Rosner [Tue, 2 Aug 2011 22:59:18 +0000 (22:59 +0000)]
bnx2x: Fix chip hanging due to TX pipe stall.

Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable.
This occurs since TX pipe is stalled due to missing XON indication towards the NIG.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix missing pause on for 578xx
Yaniv Rosner [Tue, 2 Aug 2011 22:59:10 +0000 (22:59 +0000)]
bnx2x: Fix missing pause on for 578xx

When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agor8169 : MAC address change fix for the 8168e-vl.
françois romieu [Tue, 2 Aug 2011 03:53:43 +0000 (03:53 +0000)]
r8169 : MAC address change fix for the 8168e-vl.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39252

Hayes suggested that the usual MAC{0, 4} register writes be completed
with writes to extended GigaMAC registers :
- 0xe0 .. 0xe5
- 0xf2 .. 0xf7

Registers 0xf0 and 0xf1 should be set to 0.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Prevent restarting Tx during bnx2x_nic_unload
Vladislav Zolotarov [Tue, 2 Aug 2011 08:35:43 +0000 (01:35 -0700)]
bnx2x: Prevent restarting Tx during bnx2x_nic_unload

Tx queues were stopped before  bp->state was changed to a value different
from BNX2X_STATE_OPEN, which allowed the bnx2x_tx_int() called from the
NAPI context to re-enable it. This then allowed the netdev->ndo_start_xmit()
to be called in the middle of the function reset and rings freeing.

This patch changes bp->state to a value different
from BNX2X_STATE_OPEN BEFORE disabling the Tx queues in order to restore the
broken protection against the above race in the bnx2x_tx_int().

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: add kerneldoc to skb_copy_bits()
Eric Dumazet [Fri, 29 Jul 2011 18:37:31 +0000 (18:37 +0000)]
net: add kerneldoc to skb_copy_bits()

Since skb_copy_bits() is called from assembly, add a fat comment to make
clear we should think twice before changing its prototype.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoDocumentation/bonding.txt: Update to 3.x version numbers
Jesper Juhl [Tue, 2 Aug 2011 00:59:44 +0000 (17:59 -0700)]
Documentation/bonding.txt: Update to 3.x version numbers

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodoc: Update the email address for Paul Moore in various source files
Paul Moore [Mon, 1 Aug 2011 11:10:33 +0000 (11:10 +0000)]
doc: Update the email address for Paul Moore in various source files

My @hp.com will no longer be valid starting August 5, 2011 so an update is
necessary.  My new email address is employer independent so we don't have
to worry about doing this again any time soon.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodoc: Update the MAINTAINERS info for Paul Moore
Paul Moore [Mon, 1 Aug 2011 11:10:26 +0000 (11:10 +0000)]
doc: Update the MAINTAINERS info for Paul Moore

My @hp.com will no longer be valid starting August 5, 2011 so an update is
necessary.  My new email address is employer independent so we don't have
to worry about doing this again any time soon.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoatm: br2864: sent packets truncated in VC routed mode
Chas Williams [Tue, 2 Aug 2011 00:56:14 +0000 (17:56 -0700)]
atm: br2864: sent packets truncated in VC routed mode

Reported-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosch_sfq: fix sfq_enqueue()
Eric Dumazet [Fri, 29 Jul 2011 19:22:42 +0000 (19:22 +0000)]
sch_sfq: fix sfq_enqueue()

commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.

With help from Michal Soltys and Michal Pokrywka, who did a bisection.

Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=39372
Debian ref: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631945

Reported-by: Lucas Bocchi <lucas.bocchi@gmail.com>
Reported-and-bisected-by: Michal Pokrywka <wolfmoon@o2.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michal Soltys <soltys@ziu.info>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodrivers/net/niu.c: adjust array index
Julia Lawall [Thu, 28 Jul 2011 02:46:03 +0000 (02:46 +0000)]
drivers/net/niu.c: adjust array index

Convert array index from the loop bound to the loop index.

A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,ar;
@@

for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: adjust array index
Julia Lawall [Thu, 28 Jul 2011 02:46:01 +0000 (02:46 +0000)]
net: adjust array index

Convert array index from the loop bound to the loop index.

A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,ar;
@@

for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMAINTAINERS: Remove Pekka Savola from ipv6.
David S. Miller [Mon, 1 Aug 2011 09:23:15 +0000 (02:23 -0700)]
MAINTAINERS: Remove Pekka Savola from ipv6.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-2.6
David S. Miller [Fri, 29 Jul 2011 01:38:53 +0000 (18:38 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/horms/ipvs-2.6

13 years agoproc_fork_connector: a lockless ->real_parent usage is not safe
Oleg Nesterov [Fri, 29 Jul 2011 01:26:32 +0000 (18:26 -0700)]
proc_fork_connector: a lockless ->real_parent usage is not safe

proc_fork_connector() uses ->real_parent lockless.  This is not safe if
copy_process() was called with CLONE_THREAD or CLONE_PARENT, in this case
the parent != current can go away at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: fix new sunrpc kernel-doc warning
Randy Dunlap [Thu, 28 Jul 2011 06:54:36 +0000 (06:54 +0000)]
net: fix new sunrpc kernel-doc warning

Fix new kernel-doc warning in sunrpc:

Warning(net/sunrpc/xprt.c:196): No description found for parameter 'xprt'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agor8169: Add support for D-Link 530T rev C1 (Kernel Bug 38862)
Lennart Sorensen [Thu, 28 Jul 2011 13:18:11 +0000 (13:18 +0000)]
r8169: Add support for D-Link 530T rev C1 (Kernel Bug 38862)

The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C,
unlike the previous revisions which were skge based.  It is probably
the same as the discontinued DGE-528T (0x4300) other than the PCI ID.

The PCI ID is 0x1186:0x4302.

Adding it to r8169.c where 0x1186:0x4300 is already found makes the card
be detected and work.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMAINTAINERS: orphan FrameRelay DLCI
Joe Perches [Thu, 28 Jul 2011 10:54:23 +0000 (10:54 +0000)]
MAINTAINERS: orphan FrameRelay DLCI

Mike McLagan hasn't contributed in many years and his email bounces.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosis190: Rx filter init is needed for MAC address change.
Klement Fish [Thu, 28 Jul 2011 06:03:22 +0000 (06:03 +0000)]
sis190: Rx filter init is needed for MAC address change.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=34552

Signed-off-by: Klement Fish <klement2@azet.sk>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm: Fix key lengths for rfc3686(ctr(aes))
Tushar Gohad [Thu, 28 Jul 2011 10:36:20 +0000 (10:36 +0000)]
xfrm: Fix key lengths for rfc3686(ctr(aes))

Fix the min and max bit lengths for AES-CTR (RFC3686) keys.
The number of bits in key spec is the key length (128/256)
plus 32 bits of nonce.

This change takes care of the "Invalid key length" errors
reported by setkey when specifying 288 bit keys for aes-ctr.

Signed-off-by: Tushar Gohad <tgohad@mvista.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Thu, 28 Jul 2011 12:59:19 +0000 (05:59 -0700)]
Merge git://git./linux/kernel/git/davem/sparc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  n2_crypto: Attach on Niagara-T3.
  n2rng: Attach on Niagara-T3.
  sparc: Detect and handle UltraSPARC-T3 cpu types.
  sparc: Don't do expensive hypervisor PCR write unless necessary.
  sparc: Add T3 sun4v cpu type and hypervisor group defines.
  sparc: Don't leave sparc_pmu_type NULL on sun4v.

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 28 Jul 2011 12:58:19 +0000 (05:58 -0700)]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)
  tg3: Remove 5719 jumbo frames and TSO blocks
  tg3: Break larger frags into 4k chunks for 5719
  tg3: Add tx BD budgeting code
  tg3: Consolidate code that calls tg3_tx_set_bd()
  tg3: Add partial fragment unmapping code
  tg3: Generalize tg3_skb_error_unmap()
  tg3: Remove short DMA check for 1st fragment
  tg3: Simplify tx bd assignments
  tg3: Reintroduce tg3_tx_ring_info
  ASIX: Use only 11 bits of header for data size
  ASIX: Simplify condition in rx_fixup()
  Fix cdc-phonet build
  bonding: reduce noise during init
  bonding: fix string comparison errors
  net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared
  net: add IFF_SKB_TX_SHARED flag to priv_flags
  net: sock_sendmsg_nosec() is static
  forcedeth: fix vlans
  gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e
  gro: Only reset frag0 when skb can be pulled
  ...

13 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 28 Jul 2011 12:50:27 +0000 (05:50 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md: (75 commits)
  md/raid10: handle further errors during fix_read_error better.
  md/raid10: Handle read errors during recovery better.
  md/raid10: simplify read error handling during recovery.
  md/raid10: record bad blocks due to write errors during resync/recovery.
  md/raid10:  attempt to fix read errors during resync/check
  md/raid10:  Handle write errors by updating badblock log.
  md/raid10: clear bad-block record when write succeeds.
  md/raid10: avoid writing to known bad blocks on known bad drives.
  md/raid10 record bad blocks as needed during recovery.
  md/raid10: avoid reading known bad blocks during resync/recovery.
  md/raid10 - avoid reading from known bad blocks - part 3
  md/raid10: avoid reading from known bad blocks - part 2
  md/raid10: avoid reading from known bad blocks - part 1
  md/raid10: Split handle_read_error out from raid10d.
  md/raid10: simplify/reindent some loops.
  md/raid5: Clear bad blocks on successful write.
  md/raid5.  Don't write to known bad block on doubtful devices.
  md/raid5: write errors should be recorded as bad blocks if possible.
  md/raid5: use bad-block log to improve handling of uncorrectable read errors.
  md/raid5: avoid reading from known bad blocks.
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 28 Jul 2011 12:49:31 +0000 (05:49 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: oss: rename local change_bits to avoid powerpc bitsops.h definition
  ALSA: hda - Fix duplicated DAC assignments for Realtek
  ALSA: asihpi - off by one in asihpi_hpi_ioctl()
  ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids
  ALSA: asihpi - bug fix pa use before init.
  ALSA: hda - Add support for vref-out based mute LED control on IDT codecs

13 years agon2_crypto: Attach on Niagara-T3.
David S. Miller [Thu, 28 Jul 2011 08:30:07 +0000 (01:30 -0700)]
n2_crypto: Attach on Niagara-T3.

A small modification was necessary since in the machine description
for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property.

That's OK because this property was always nothing more than an
array of integers '1' ... 'nr_inos + 1' so we can just compute it
in-place.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agon2rng: Attach on Niagara-T3.
David S. Miller [Thu, 28 Jul 2011 06:33:03 +0000 (23:33 -0700)]
n2rng: Attach on Niagara-T3.

And stop referring to Victoria Falls, as the attribute we're
talking about is whether the rng is multi-unit capable which
applies to several chip variants now.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Remove 5719 jumbo frames and TSO blocks
Matt Carlson [Wed, 27 Jul 2011 14:20:54 +0000 (14:20 +0000)]
tg3: Remove 5719 jumbo frames and TSO blocks

The A0 revision of this chip is the only device that requires these
features to be disabled.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Break larger frags into 4k chunks for 5719
Matt Carlson [Wed, 27 Jul 2011 14:20:53 +0000 (14:20 +0000)]
tg3: Break larger frags into 4k chunks for 5719

The 5719 has bug where RDMAs larger than 4k can cause problems.  This
patch works around the problem by dividing larger DMA requests into
something the hardware can handle.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Add tx BD budgeting code
Matt Carlson [Wed, 27 Jul 2011 14:20:52 +0000 (14:20 +0000)]
tg3: Add tx BD budgeting code

As the driver breaks large skb fragments into smaller submissions to the
hardware, there is a new danger that BDs might get exhausted before all
fragments have been mapped.  This patch adds code to make sure tx BDs
aren't oversubscribed and flag the condition if it happens.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Consolidate code that calls tg3_tx_set_bd()
Matt Carlson [Wed, 27 Jul 2011 14:20:51 +0000 (14:20 +0000)]
tg3: Consolidate code that calls tg3_tx_set_bd()

This patch consolidates all code that populates tx BDs into a single
routine.  Setting tx BDs needs to be more carefully controlled to see if
workarounds need to be applied.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Add partial fragment unmapping code
Matt Carlson [Wed, 27 Jul 2011 14:20:50 +0000 (14:20 +0000)]
tg3: Add partial fragment unmapping code

The following patches are going to break skb fragments into smaller
sizes.  This patch attempts to make the change easier to digest by only
addressing the skb teardown portion.

The patch modifies the driver to skip over any BDs that have a flag set
that indicates the BD isn't the beginning of an skb fragment.  Such BDs
were a result of segmentation and do not need a pci_unmap_page() call.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Generalize tg3_skb_error_unmap()
Matt Carlson [Wed, 27 Jul 2011 14:20:49 +0000 (14:20 +0000)]
tg3: Generalize tg3_skb_error_unmap()

In the following patches, unmapping skb fragments will get just as
complicated as mapping them.  This patch generalizes
tg3_skb_error_unmap() and makes it the one-stop-shop for skb unmapping.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Remove short DMA check for 1st fragment
Matt Carlson [Wed, 27 Jul 2011 14:20:48 +0000 (14:20 +0000)]
tg3: Remove short DMA check for 1st fragment

The first fragment of an skb should always be greater than 8 bytes.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Simplify tx bd assignments
Matt Carlson [Wed, 27 Jul 2011 14:20:47 +0000 (14:20 +0000)]
tg3: Simplify tx bd assignments

In the following patches, the process the driver will use to assign skb
fragments to transmit BDs will get more complicated.  To prepare for
that new code, this patch seeks to simplify how transmit BDs are
populated.  It does this by separating the code that assigns the BD
members from the logic that controls how the fields are set.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Reintroduce tg3_tx_ring_info
Matt Carlson [Wed, 27 Jul 2011 14:20:46 +0000 (14:20 +0000)]
tg3: Reintroduce tg3_tx_ring_info

The following patches will require the use of an additional flag in the
ring_info structure.  The use of this flag is tx path specific, so this
patch defines a specialized ring_info structure.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoASIX: Use only 11 bits of header for data size
Marek Vasut [Tue, 26 Jul 2011 16:44:47 +0000 (16:44 +0000)]
ASIX: Use only 11 bits of header for data size

The AX88772B uses only 11 bits of the header for the actual size. The other bits
are used for something else. This causes dmesg full of messages:

asix_rx_fixup() Bad Header Length

This patch trims the check to only 11 bits. I believe on older chips, the
remaining 5 top bits are unused.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoASIX: Simplify condition in rx_fixup()
Marek Vasut [Tue, 26 Jul 2011 16:44:46 +0000 (16:44 +0000)]
ASIX: Simplify condition in rx_fixup()

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoFix cdc-phonet build
Chris Clayton [Tue, 26 Jul 2011 12:20:22 +0000 (12:20 +0000)]
Fix cdc-phonet build

Try to send to correct address this time!

----------  Forwarded Message  ----------

Subject: [PATCH] Fix cdc-phonet build
Date: Saturday 23 Jul 2011
From: Chris Clayton <chris2553@googlemail.com>
To: linux-net@vger.kernel.org

cdc-phonet does not presently build on linux-3.0 because there is no entry for it in
drivers/net/Makefile. This patch adds that entry.

Signed-off-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: reduce noise during init
Andy Gospodarek [Wed, 27 Jul 2011 10:09:26 +0000 (10:09 +0000)]
bonding: reduce noise during init

On Tue, Jul 26, 2011 at 05:40:27PM -0700, Joe Perches wrote:
> On Tue, 2011-07-26 at 17:37 -0700, Jay Vosburgh wrote:
> > Joe Perches <joe@perches.com> wrote:
> > >I'd prefer you don't separate the format string
> > >into multiple pieces.
> > Why not?  To me, it looks easier to read split into sections
> > that don't wrap lines.
>
> Harder to grep for a dmesg and the
> defect rate of these split formats is
> typically higher than single strings
> because of bad spacing between string
> segments.
>

I noticed that you took some time back in late 2009 to 'consolidate' the
split format-strings present in the bonding driver at the time and I've
decided I'm fine to leave them the way they are.  The main point of my
patch was to change the output and I would like to get that included.
Here is my updated patch...

Subject: [PATCH net-next-2.6 v2] bonding: reduce noise during init

Many are using sysfs to configure bonding rather than module options, so
there is no need for bonding to throw this warning in normal cases.

Keep the message around when debugging is enabled as it might be useful
for someone desperate enough to enable debugging, but eliminate it
otherwise.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: fix string comparison errors
Andy Gospodarek [Tue, 26 Jul 2011 11:12:27 +0000 (11:12 +0000)]
bonding: fix string comparison errors

When a bond contains a device where one name is the subset of another
(eth1 and eth10, for example), one cannot properly set the primary
device or the currently active device.

This was reported and based on work by Takuma Umeya.  I also verified
the problem and tested that this fix resolves it.

V2: A few did not like the the current code or my changes, so I
refactored bonding_store_primary and bonding_store_active_slave to be a
bit cleaner, dropped the use of strnicmp since we did not really need
the comparison to be case insensitive, and formatted the input string
from sysfs so a comparison to IFNAMSIZ could be used.

I also discovered an error in bonding_store_active_slave that would
modify bond->primary_slave rather than bond->curr_active_slave before
forcing the bonding driver to choose a new active slave.

V3: Actually sending the proper patch....

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Takuma Umeya <tumeya@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared
Neil Horman [Tue, 26 Jul 2011 06:05:38 +0000 (06:05 +0000)]
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared

After the last patch, We are left in a state in which only drivers calling
ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real
hardware call ether_setup for their net_devices and don't hold any state in
their skbs.  There are a handful of drivers that violate this assumption of
course, and need to be fixed up.  This patch identifies those drivers, and marks
them as not being able to support the safe transmission of skbs by clearning the
IFF_TX_SKB_SHARING flag in priv_flags

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Karsten Keil <isdn@linux-pingi.de>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: add IFF_SKB_TX_SHARED flag to priv_flags
Neil Horman [Tue, 26 Jul 2011 06:05:37 +0000 (06:05 +0000)]
net: add IFF_SKB_TX_SHARED flag to priv_flags

Pktgen attempts to transmit shared skbs to net devices, which can't be used by
some drivers as they keep state information in skbs.  This patch adds a flag
marking drivers as being able to handle shared skbs in their tx path.  Drivers
are defaulted to being unable to do so, but calling ether_setup enables this
flag, as 90% of the drivers calling ether_setup touch real hardware and can
handle shared skbs.  A subsequent patch will audit drivers to ensure that the
flag is set properly

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Jiri Pirko <jpirko@redhat.com>
CC: Robert Olsson <robert.olsson@its.uu.se>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: sock_sendmsg_nosec() is static
Eric Dumazet [Tue, 26 Jul 2011 02:39:41 +0000 (02:39 +0000)]
net: sock_sendmsg_nosec() is static

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoforcedeth: fix vlans
Jiri Pirko [Tue, 26 Jul 2011 10:19:28 +0000 (10:19 +0000)]
forcedeth: fix vlans

For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is
still set and some pseudorandom vids appear. So check for
NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan
mode on probe.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agogianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e
Sebastian Pöhn [Tue, 26 Jul 2011 00:03:13 +0000 (00:03 +0000)]
gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e

commit 87c288c6e9aa31720b72e2bc2d665e24e1653c3e "gianfar: do vlan cleanup" has two issues:
# permutation of rx and tx flags
# enabling vlan tag insertion by default (this leads to unusable connections on some configurations)

If VLAN insertion is requested (via ethtool) it will be set at an other point ...

Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Thu, 28 Jul 2011 05:18:47 +0000 (22:18 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

13 years agosparc: Detect and handle UltraSPARC-T3 cpu types.
David S. Miller [Thu, 28 Jul 2011 04:06:16 +0000 (21:06 -0700)]
sparc: Detect and handle UltraSPARC-T3 cpu types.

The cpu compatible string we look for is "SPARC-T3".

As far as memset/memcpy optimizations go, we treat this chip the same
as Niagara-T2/T2+.  Use cache initializing stores for memset, and use
perfetch, FPU block loads, cache initializing stores, and block stores
for copies.

We use the Niagara-T2 perf support, since T3 is a close relative in
this regard.  Later we'll add support for the new events T3 can
report, plus enable T3's new "sample" mode.

For now I haven't added any new ELF hwcap flags.  We probably need
to add a couple, for example:

T2 and T3 both support the population count instruction in hardware.

T3 supports VIS3 instructions, including support (finally) for
partitioned shift.  One can also now move directly between float
and integer registers.

T3 supports instructions meant to help with Galois Field and other HPC
calculations, such as XOR multiply.  Also there are "OP and negate"
instructions, for example "fnmul" which is multiply-and-negate.

T3 recognizes the transactional memory opcodes, however since
transactional memory isn't supported: 1) 'commit' behaves as a NOP and
2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps'
behaves as a NOP.

So we'll need about 3 new elf capability flags in the end to represent
all of these things.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosparc: Don't do expensive hypervisor PCR write unless necessary.
David S. Miller [Thu, 28 Jul 2011 03:46:25 +0000 (20:46 -0700)]
sparc: Don't do expensive hypervisor PCR write unless necessary.

The hypervisor call is only necessary if hypervisor events are
being requested.

So if we're not tracking hypervisor events, simply do a direct
register write.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosparc: Add T3 sun4v cpu type and hypervisor group defines.
David S. Miller [Thu, 28 Jul 2011 03:42:51 +0000 (20:42 -0700)]
sparc: Add T3 sun4v cpu type and hypervisor group defines.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosparc: Don't leave sparc_pmu_type NULL on sun4v.
David S. Miller [Thu, 28 Jul 2011 03:25:57 +0000 (20:25 -0700)]
sparc: Don't leave sparc_pmu_type NULL on sun4v.

Otherwise we'll crash in the sparc perf init code.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 28 Jul 2011 02:26:38 +0000 (19:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
  tpm_nsc: Fix bug when loading multiple TPM drivers
  tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
  tpm: Fix compilation warning when CONFIG_PNP is not defined
  TOMOYO: Update kernel-doc.
  tpm: Fix a typo
  tpm_tis: Probing function for Intel iTPM bug
  tpm_tis: Fix the probing for interrupts
  tpm_tis: Delay ACPI S3 suspend while the TPM is busy
  tpm_tis: Re-enable interrupts upon (S3) resume
  tpm: Fix display of data in pubek sysfs entry
  tpm_tis: Add timeouts sysfs entry
  tpm: Adjust interface timeouts if they are too small
  tpm: Use interface timeouts returned from the TPM
  tpm_tis: Introduce durations sysfs entry
  tpm: Adjust the durations if they are too small
  tpm: Use durations returned from TPM
  TOMOYO: Enable conditional ACL.
  TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
  TOMOYO: Allow using executable's realpath and symlink's target as conditions.
  TOMOYO: Allow using owner/group etc. of file objects as conditions.
  ...

Fix up trivial conflict in security/tomoyo/realpath.c

13 years agomd/raid10: handle further errors during fix_read_error better.
NeilBrown [Thu, 28 Jul 2011 01:39:25 +0000 (11:39 +1000)]
md/raid10: handle further errors during fix_read_error better.

If we find more read/write errors we should record a bad block before
failing the device.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: Handle read errors during recovery better.
NeilBrown [Thu, 28 Jul 2011 01:39:25 +0000 (11:39 +1000)]
md/raid10: Handle read errors during recovery better.

Currently when we get a read error during recovery, we simply abort
the recovery.

Instead, repeat the read in page-sized blocks.
On successful reads, write to the target.
On read errors, record a bad block on the destination,
and only if that fails do we abort the recovery.

As we now retry reads we need to know where we read from.  This was in
bi_sector but that can be changed during a read attempt.
So store the correct from_addr and to_addr in the r10_bio for later
access.

Signed-off-by: NeilBrown<neilb@suse.de>
13 years agomd/raid10: simplify read error handling during recovery.
NeilBrown [Thu, 28 Jul 2011 01:39:25 +0000 (11:39 +1000)]
md/raid10: simplify read error handling during recovery.

If a read error is detected during recovery the code currently
fails the read device.
This isn't really necessary.  recovery_request_write will signal
a write error to end_sync_write and it will record a write
error on the destination device which will record a bad block
there or kick it from the array.

So just remove this call to do md_error.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: record bad blocks due to write errors during resync/recovery.
NeilBrown [Thu, 28 Jul 2011 01:39:25 +0000 (11:39 +1000)]
md/raid10: record bad blocks due to write errors during resync/recovery.

If we get a write error during resync/recovery don't fail the device
but instead record a bad block.  If that fails we can then fail the
device.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: attempt to fix read errors during resync/check
NeilBrown [Thu, 28 Jul 2011 01:39:25 +0000 (11:39 +1000)]
md/raid10:  attempt to fix read errors during resync/check

We already attempt to fix read errors found during normal IO
and a 'repair' process.
It is best to try to repair them at any time they are found,
so move a test so that during sync and check a read error will
be corrected by over-writing with good data.

If both (all) devices have known bad blocks in the sync section we
won't try to fix even though the bad blocks might not overlap.  That
should be considered later.

Also if we hit a read error during recovery we don't try to fix it.
It would only be possible to fix if there were at least three copies
of data, which is not very common with RAID10.  But it should still
be considered later.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: Handle write errors by updating badblock log.
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10:  Handle write errors by updating badblock log.

When we get a write error (in the data area, not in metadata),
update the badblock log rather than failing the whole device.

As the write may well be many blocks, we trying writing each
block individually and only log the ones which fail.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: clear bad-block record when write succeeds.
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10: clear bad-block record when write succeeds.

If we succeed in writing to a block that was recorded as
being bad, we clear the bad-block record.

This requires some delayed handling as the bad-block-list update has
to happen in process-context.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: avoid writing to known bad blocks on known bad drives.
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10: avoid writing to known bad blocks on known bad drives.

Writing to known bad blocks on drives that have seen a write error
is asking for trouble.  So try to avoid these blocks.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10 record bad blocks as needed during recovery.
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10 record bad blocks as needed during recovery.

When recovering one or more devices, if all the good devices have
bad blocks we should record a bad block on the device being rebuilt.

If this fails, we need to abort the recovery.

To ensure we don't think that we aborted later than we actually did,
we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync,
in particular before mddev->curr_resync is updated.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: avoid reading known bad blocks during resync/recovery.
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10: avoid reading known bad blocks during resync/recovery.

During resync/recovery limit the size of the request to avoid
reading into a bad block that does not start at-or-before the current
read address.

Similarly if there is a bad block at this address, don't allow the
current request to extend beyond the end of that bad block.

Now that we don't ever read from known bad blocks, it is safe to allow
devices with those blocks into the array.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10 - avoid reading from known bad blocks - part 3
NeilBrown [Thu, 28 Jul 2011 01:39:24 +0000 (11:39 +1000)]
md/raid10 - avoid reading from known bad blocks - part 3

When attempting to repair a read error, don't read from
devices with a known bad block.

As we are only reading PAGE_SIZE blocks, we don't try to
narrow down to smaller regions in the hope that only part of this
page is bad - it isn't worth the effort.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: avoid reading from known bad blocks - part 2
NeilBrown [Thu, 28 Jul 2011 01:39:23 +0000 (11:39 +1000)]
md/raid10: avoid reading from known bad blocks - part 2

When redirecting a read error to a different device, we must
again avoid bad blocks and possibly split the request.

Spin_lock typo fixed thanks to Dan Carpenter <error27@gmail.com>

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: avoid reading from known bad blocks - part 1
NeilBrown [Thu, 28 Jul 2011 01:39:23 +0000 (11:39 +1000)]
md/raid10: avoid reading from known bad blocks - part 1

This patch just covers the basic read path:
 1/ read_balance needs to check for badblocks, and return not only
    the chosen slot, but also how many good blocks are available
    there.
 2/ read submission must be ready to issue multiple reads to
    different devices as different bad blocks on different devices
    could mean that a single large read cannot be served by any one
    device, but can still be served by the array.
    This requires keeping count of the number of outstanding requests
    per bio.  This count is stored in 'bi_phys_segments'

On read error we currently just fail the request if another target
cannot handle the whole request.  Next patch refines that a bit.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: Split handle_read_error out from raid10d.
NeilBrown [Thu, 28 Jul 2011 01:39:23 +0000 (11:39 +1000)]
md/raid10: Split handle_read_error out from raid10d.

raid10d() is too big and is about to get bigger, so split
handle_read_error() out as a separate function.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid10: simplify/reindent some loops.
NeilBrown [Thu, 28 Jul 2011 01:39:23 +0000 (11:39 +1000)]
md/raid10: simplify/reindent some loops.

When a loop ends with a large if, it can be neater to change the
if to invert the condition and just 'continue'.
Then the body of the if can be indented to a lower level.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid5: Clear bad blocks on successful write.
NeilBrown [Thu, 28 Jul 2011 01:39:23 +0000 (11:39 +1000)]
md/raid5: Clear bad blocks on successful write.

On a successful write to a known bad block, flag the sh
so that raid5d can remove the known bad block from the list.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid5. Don't write to known bad block on doubtful devices.
NeilBrown [Thu, 28 Jul 2011 01:39:22 +0000 (11:39 +1000)]
md/raid5.  Don't write to known bad block on doubtful devices.

If a device has seen write errors, don't write to any known
bad blocks on that device.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid5: write errors should be recorded as bad blocks if possible.
NeilBrown [Thu, 28 Jul 2011 01:39:22 +0000 (11:39 +1000)]
md/raid5: write errors should be recorded as bad blocks if possible.

When a write error is detected, don't mark the device as failed
immediately but rather record the fact for handle_stripe to deal with.

Handle_stripe then attempts to record a bad block.  Only if that fails
does the device get marked as faulty.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid5: use bad-block log to improve handling of uncorrectable read errors.
NeilBrown [Thu, 28 Jul 2011 01:39:22 +0000 (11:39 +1000)]
md/raid5: use bad-block log to improve handling of uncorrectable read errors.

If we get an uncorrectable read error - record a bad block rather than
failing the device.
And if these errors (which may be due to known bad blocks) cause
recovery to be impossible, record a bad block on the recovering
devices, or abort the recovery.

As we might abort a recovery without failing a device we need to teach
RAID5 about recovery_disabled handling.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid5: avoid reading from known bad blocks.
NeilBrown [Thu, 28 Jul 2011 01:39:22 +0000 (11:39 +1000)]
md/raid5: avoid reading from known bad blocks.

There are two times that we might read in raid5:
1/ when a read request fits within a chunk on a single
   working device.
   In this case, if there is any bad block in the range of
   the read, we simply fail the cache-bypass read and
   perform the read though the stripe cache.

2/ when reading into the stripe cache.  In this case we
   mark as failed any device which has a bad block in that
   strip (1 page wide).
   Note that we will both avoid reading and avoid writing.
   This is correct (as we will never read from the block, there
   is no point writing), but not optimal (as writing could 'fix'
   the error) - that will be addressed later.

If we have not seen any write errors on the device yet, we treat a bad
block like a recent read error.  This will encourage an attempt to fix
the read error which will either generate a write error, or will
ensure good data is stored there.  We don't yet forget the bad block
in that case.  That comes later.

Now that we honour bad blocks when reading we can allow devices with
bad blocks into the array.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid1: factor several functions out or raid1d()
NeilBrown [Thu, 28 Jul 2011 01:38:13 +0000 (11:38 +1000)]
md/raid1: factor several functions out or raid1d()

raid1d is too big with several deep branches.
So separate them out into their own functions.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: improve handling of read failure during recovery.
NeilBrown [Thu, 28 Jul 2011 01:33:42 +0000 (11:33 +1000)]
md/raid1: improve handling of read failure during recovery.

If we cannot read a block from anywhere during recovery, there is
now a better approach than just giving up.
We can record a bad block on each device and keep going - being
careful not to clear the bad block when a write succeeds as it might -
it will be a write of incorrect data.

We have now reached the state where - for raid1 - we only call
md_error if md_set_badblocks has failed.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: record badblocks found during resync etc.
NeilBrown [Thu, 28 Jul 2011 01:33:00 +0000 (11:33 +1000)]
md/raid1: record badblocks found during resync etc.

If we find a bad block while writing as part of resync/recovery we
need to report that back to raid1d which must record the bad block,
or fail the device.

Similarly when fixing a read error, a further error should just
record a bad block if possible rather than failing the device.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: Handle write errors by updating badblock log.
NeilBrown [Thu, 28 Jul 2011 01:32:41 +0000 (11:32 +1000)]
md/raid1:  Handle write errors by updating badblock log.

When we get a write error (in the data area, not in metadata),
update the badblock log rather than failing the whole device.

As the write may well be many blocks, we trying writing each
block individually and only log the ones which fail.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: store behind-write pages in bi_vecs.
NeilBrown [Thu, 28 Jul 2011 01:32:10 +0000 (11:32 +1000)]
md/raid1: store behind-write pages in bi_vecs.

When performing write-behind we allocate pages to store the data
during write.
Previously we just keep a list of pages.  Now we keep a list of
bi_vec which includes offset and size.
This means that the r1bio has complete information to create a new
bio which will be needed for retrying after write errors.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: clear bad-block record when write succeeds.
NeilBrown [Thu, 28 Jul 2011 01:31:49 +0000 (11:31 +1000)]
md/raid1: clear bad-block record when write succeeds.

If we succeed in writing to a block that was recorded as
being bad, we clear the bad-block record.

This requires some delayed handling as the bad-block-list update has
to happen in process-context.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: avoid writing to known-bad blocks on known-bad drives.
NeilBrown [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md/raid1: avoid writing to known-bad blocks on known-bad drives.

If we have seen any write error on a drive, then don't write to
any known-bad blocks on that drive.
If necessary, we divide the write request up into pieces just
like we do for reads, so each piece is either all written or
all not written to any given drive.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd: update documentation for md/rdev/state sysfs interface
Namhyung Kim [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md: update documentation for md/rdev/state sysfs interface

Previous patches in the bad block series extended behavior of
rdev's 'state' interface but lacked documentation update.
Fix it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd: make it easier to wait for bad blocks to be acknowledged.
NeilBrown [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md: make it easier to wait for bad blocks to be acknowledged.

It is only safe to choose not to write to a bad block if that bad
block is safely recorded in metadata - i.e. if it has been
'acknowledged'.

If it hasn't we need to wait for the acknowledgement.

We support that using rdev->blocked wait and
md_wait_for_blocked_rdev by introducing a new device flag
'BlockedBadBlock'.

This flag is only advisory.
It is cleared whenever we acknowledge a bad block, so that a waiter
can re-check the particular bad blocks that it is interested it.

It should be set by a caller when they find they need to wait.
This (set after test) is inherently racy, but as
md_wait_for_blocked_rdev already has a timeout, losing the race will
have minimal impact.

When we clear "Blocked" was also clear "BlockedBadBlocks" incase it
was set incorrectly (see above race).

We also modify the way we manage 'Blocked' to fit better with the new
handling of 'BlockedBadBlocks' and to make it consistent between
externally managed and internally managed metadata.   This requires
that each raidXd loop checks if the metadata needs to be written and
triggers a write (md_check_recovery) if needed.  Otherwise a queued
write request might cause raidXd to wait for the metadata to write,
and only that thread can write it.

Before writing metadata, we set FaultRecorded for all devices that
are Faulty, then after writing the metadata we clear Blocked for any
device for which the Fault was certainly Recorded.

The 'faulty' device flag now appears in sysfs if the device is faulty
*or* it has unacknowledged bad blocks.  So user-space which does not
understand bad blocks can continue to function correctly.
User space which does, should not assume a device is faulty until it
sees the 'faulty' flag, and then sees the list of unacknowledged bad
blocks is empty.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd: add 'write_error' flag to component devices.
NeilBrown [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md: add 'write_error' flag to component devices.

If a device has ever seen a write error, we will want to handle
known-bad-blocks differently.
So create an appropriate state flag and export it via sysfs.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd/raid1: avoid reading known bad blocks during resync
NeilBrown [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md/raid1: avoid reading known bad blocks during resync

When performing resync/etc, keep the size of the request
small enough that it doesn't overlap any known bad blocks.
Devices with badblocks at the start of the request are completely
excluded.
If there is nowhere to read from due to bad blocks, record
a bad block on each target device.

Now that we never read from known-bad-blocks we can allow devices with
known-bad-blocks into a RAID1.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/raid1: avoid reading from known bad blocks.
NeilBrown [Thu, 28 Jul 2011 01:31:48 +0000 (11:31 +1000)]
md/raid1: avoid reading from known bad blocks.

Now that we have a bad block list, we should not read from those
blocks.
There are several main parts to this:
  1/ read_balance needs to check for bad blocks, and return not only
     the chosen device, but also how many good blocks are available
     there.
  2/ fix_read_error needs to avoid trying to read from bad blocks.
  3/ read submission must be ready to issue multiple reads to
     different devices as different bad blocks on different devices
     could mean that a single large read cannot be served by any one
     device, but can still be served by the array.
     This requires keeping count of the number of outstanding requests
     per bio.  This count is stored in 'bi_phys_segments'
  4/ retrying a read needs to also be ready to submit a smaller read
     and queue another request for the rest.

This does not yet handle bad blocks when reading to perform resync,
recovery, or check.

'md_trim_bio' will also be used for RAID10, so put it in md.c and
export it.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd: Disable bad blocks and v0.90 metadata.
NeilBrown [Thu, 28 Jul 2011 01:31:47 +0000 (11:31 +1000)]
md: Disable bad blocks and v0.90 metadata.

v0.90 metadata cannot record bad blocks, so when loading metadata
for such a device, set shift to -1.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd: load/store badblock list from v1.x metadata
NeilBrown [Thu, 28 Jul 2011 01:31:47 +0000 (11:31 +1000)]
md: load/store badblock list from v1.x metadata

Space must have been allocated when array was created.
A feature flag is set when the badblock list is non-empty, to
ensure old kernels don't load and trust the whole device.

We only update the on-disk badblocklist when it has changed.
If the badblocklist (or other metadata) is stored on a bad block, we
don't cope very well.

If metadata has no room for bad block, flag bad-blocks as disabled,
and do the same for 0.90 metadata.

Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd: don't allow arrays to contain devices with bad blocks.
NeilBrown [Thu, 28 Jul 2011 01:31:47 +0000 (11:31 +1000)]
md: don't allow arrays to contain devices with bad blocks.

As no personality understand bad block lists yet, we must
reject any device that is known to contain bad blocks.
As the personalities get taught, these tests can be removed.

This only applies to raid1/raid5/raid10.
For linear/raid0/multipath/faulty the whole concept of bad blocks
doesn't mean anything so there is no point adding the checks.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd: add documentation for bad block log
Namhyung Kim [Thu, 28 Jul 2011 01:31:47 +0000 (11:31 +1000)]
md: add documentation for bad block log

Previous patch in the bad block series added new sysfs interfaces
([unacknowledged_]bad_blocks) for each rdev without documentation.
Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
13 years agomd/bad-block-log: add sysfs interface for accessing bad-block-log.
NeilBrown [Thu, 28 Jul 2011 01:31:47 +0000 (11:31 +1000)]
md/bad-block-log: add sysfs interface for accessing bad-block-log.

This can show the log (providing it fits in one page) and
allows bad blocks to be 'acknowledged' meaning that they
have safely been recorded in metadata.

Clearing bad blocks is not allowed via sysfs (except for
code testing).  A bad block can only be cleared when
a write to the block succeeds.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agomd: beginnings of bad block management.
NeilBrown [Thu, 28 Jul 2011 01:31:46 +0000 (11:31 +1000)]
md: beginnings of bad block management.

This the first step in allowing md to track bad-blocks per-device so
that we can fail individual blocks rather than the whole device.

This patch just adds a data structure for recording bad blocks, with
routines to add, remove, search the list.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Wed, 27 Jul 2011 23:43:52 +0000 (16:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: make sure reserve_metadata_bytes doesn't leak out strange errors
  Btrfs: use the commit_root for reading free_space_inode crcs
  Btrfs: reduce extent_state lock contention for metadata
  Btrfs: remove lockdep magic from btrfs_next_leaf
  Btrfs: make a lockdep class for each root
  Btrfs: switch the btrfs tree locks to reader/writer
  Btrfs: fix deadlock when throttling transactions
  Btrfs: stop using highmem for extent_buffers
  Btrfs: fix BUG_ON() caused by ENOSPC when relocating space
  Btrfs: tag pages for writeback in sync
  Btrfs: fix enospc problems with delalloc
  Btrfs: don't flush delalloc arbitrarily
  Btrfs: use find_or_create_page instead of grab_cache_page
  Btrfs: use a worker thread to do caching
  Btrfs: fix how we merge extent states and deal with cached states
  Btrfs: use the normal checksumming infrastructure for free space cache
  Btrfs: serialize flushers in reserve_metadata_bytes
  Btrfs: do transaction space reservation before joining the transaction
  Btrfs: try to only do one btrfs_search_slot in do_setxattr

13 years agomd: remove suspicious size_of()
NeilBrown [Wed, 27 Jul 2011 21:56:24 +0000 (07:56 +1000)]
md: remove suspicious size_of()

When calling bioset_create we pass the size of the front_pad as
   sizeof(mddev)
which looks suspicious as mddev is a pointer and so it looks like a
common mistake where
   sizeof(*mddev)
was intended.
The size is actually correct as we want to store a pointer in the
front padding of the bios created by the bioset, so make the intent
more explicit by using
   sizeof(mddev_t *)

Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>