GitHub/exynos8895/android_kernel_samsung_universal8895.git
14 years agoMIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.
David Daney [Thu, 22 Jul 2010 18:59:27 +0000 (11:59 -0700)]
MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.

For 64-bit, we must use DADDU and DSUBU.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1483/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: N32: Define getdents64.
Ralf Baechle [Thu, 22 Jul 2010 01:20:25 +0000 (21:20 -0400)]
MIPS: N32: Define getdents64.

As a relativly new ABI N32 should only have received the getdents64(2) but
instead it only had getdents(2).  This was noticed as a performance anomaly
in glibc.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: MTX-1: Fix PCI on the MeshCube and related boards
Bruno Randolf [Sun, 11 Jul 2010 15:40:28 +0000 (00:40 +0900)]
MIPS: MTX-1: Fix PCI on the MeshCube and related boards

This patch fixes a regression introduced by commit "MIPS: Alchemy: MTX-1:
Use linux gpio api." (bb706b28bbd647c2fd7f22d6bf03a18b9552be05) which broke
PCI bus operation. The problem is caused by alchemy_gpio2_enable() which
resets the GPIO2 block. Two PCI signals (PCI_SERR and PCI_RST) are connected
to GPIO2 and they obviously do not to like the reset. Since GPIO2 is
correctly initialized by the boot monitor (YAMON) it is not necessary to
call this function, so just remove it.

Also replace gpio_set_value() with alchemy_gpio_set_value() to avoid
problems in case gpiolib gets initialized after PCI. And since alchemy
gpio_set_value() calls au_sync() we don't have to au_sync() again later.

Signed-off-by: Bruno Randolf <br1@einfach.org>
To: linux-mips@linux-mips.org
To: manuel.lauss@googlemail.com
Patchwork: https://patchwork.linux-mips.org/patch/1448/
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Make init_vdso a subsys_initcall.
David Daney [Wed, 16 Jun 2010 22:00:28 +0000 (15:00 -0700)]
MIPS: Make init_vdso a subsys_initcall.

Quoting from Jiri Slaby's patch of a similar nature for x86:

    When initrd is in use and a driver does request_module() in its
    module_init (i.e. __initcall or device_initcall), a modprobe
    process is created with VDSO mapping. But VDSO is inited even in
    __initcall, i.e. on the same level (at the same time), so it may
    not be inited yet (link order matters).

Move init_vdso up to subsys_initcall to avoid the issue.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Patchwork: http://patchwork.linux-mips.org/patch/1386/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: "Fix" useless 'init_vdso successfully' message.
David Daney [Wed, 16 Jun 2010 22:00:27 +0000 (15:00 -0700)]
MIPS: "Fix" useless 'init_vdso successfully' message.

In addition to being useless, it was mis-spelled.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1385/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: PowerTV: Move register setup to before reading registers.
David VomLehn [Fri, 18 Jun 2010 23:51:49 +0000 (16:51 -0700)]
MIPS: PowerTV: Move register setup to before reading registers.

The 4600 family code reads registers to differentiate between two ASIC
variants, but this was being done prior to the register setup. This moves
register setup before the reading code.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1392/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoSOUND: Au1000: Fix section mismatch
Ralf Baechle [Mon, 26 Jul 2010 18:08:15 +0000 (19:08 +0100)]
SOUND: Au1000: Fix section mismatch

WARNING: sound/soc/au1x/snd-soc-au1xpsc-i2s.o(.data+0xa8): Section mismatch in reference from the variable au1xpsc_i2s_driver to the function .init.text:au1xpsc_i2s_drvprobe()
The variable au1xpsc_i2s_driver references
the function __init au1xpsc_i2s_drvprobe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoVIDEO: Au1100fb: Fix section mismatch
Ralf Baechle [Mon, 26 Jul 2010 18:08:15 +0000 (19:08 +0100)]
VIDEO: Au1100fb: Fix section mismatch

WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe()
The variable au1100fb_driver references
the function __init au1100fb_drv_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Fixing which triggers of a slew of further mismatches:

WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix
The function __devinit au1100fb_drv_probe() references
a variable __initdata au1100fb_fix.
If au1100fb_fix is only used by au1100fb_drv_probe then
annotate au1100fb_fix with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var
The function __devinit au1100fb_drv_probe() references
a variable __initdata au1100fb_var.
If au1100fb_var is only used by au1100fb_drv_probe then
annotate au1100fb_var with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoVIDEO: PMAGB-B: Fix section mismatch
Ralf Baechle [Mon, 26 Jul 2010 18:08:15 +0000 (19:08 +0100)]
VIDEO: PMAGB-B: Fix section mismatch

WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix
The function __devinit pmagbafb_probe() references
a variable __initdata pmagbafb_fix.
If pmagbafb_fix is only used by pmagbafb_probe then
annotate pmagbafb_fix with a matching annotation.

Fixing this one triggers a few more mismatches in order:

WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix
The function __devinit pmagbbfb_probe() references
a variable __initdata pmagbbfb_fix.
If pmagbbfb_fix is only used by pmagbbfb_probe then
annotate pmagbbfb_fix with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined
The function __devinit pmagbbfb_probe() references
a variable __initdata pmagbbfb_defined.
If pmagbbfb_defined is only used by pmagbbfb_probe then
annotate pmagbbfb_defined with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup()
The function __devinit pmagbbfb_probe() references
a function __init pmagbbfb_screen_setup().
If pmagbbfb_screen_setup is only used by pmagbbfb_probe then
annotate pmagbbfb_screen_setup with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup()
The function __devinit pmagbbfb_probe() references
a function __init pmagbbfb_osc_setup().
If pmagbbfb_osc_setup is only used by pmagbbfb_probe then
annotate pmagbbfb_osc_setup with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993
The function __devinit pmagbbfb_osc_setup() references
a variable __initdata pmagbbfb_freqs.15993.
If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then
annotate pmagbbfb_freqs.15993 with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoVIDEO: PMAG-BA: Fix section mismatch
Ralf Baechle [Mon, 26 Jul 2010 18:08:14 +0000 (19:08 +0100)]
VIDEO: PMAG-BA: Fix section mismatch

WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr
om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe()
The variable pmagbafb_driver references
the function __init pmagbafb_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Fixing this one triggers 2 more:

WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix
The function __devinit pmagbafb_probe() references
a variable __initdata pmagbafb_fix.
If pmagbafb_fix is only used by pmagbafb_probe then
annotate pmagbafb_fix with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined
The function __devinit pmagbafb_probe() references
a variable __initdata pmagbafb_defined.
If pmagbafb_defined is only used by pmagbafb_probe then
annotate pmagbafb_defined with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoNET: declance: Fix section mismatches
Ralf Baechle [Mon, 26 Jul 2010 18:08:14 +0000 (19:08 +0100)]
NET: declance: Fix section mismatches

WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from
the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe()
The variable dec_lance_tc_driver references
the function __init dec_lance_tc_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Fixing this one results in a new mismatch:

WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe()
The function __devinit dec_lance_tc_probe() references
a function __init dec_lance_probe().
If dec_lance_probe is only used by dec_lance_tc_probe then
annotate dec_lance_probe with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoVIDEO. gbefb: Fix section mismatches.
Ralf Baechle [Mon, 26 Jul 2010 18:08:13 +0000 (19:08 +0100)]
VIDEO. gbefb: Fix section mismatches.

WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup()
The function __devinit gbefb_probe() references
a function __init gbefb_setup().
If gbefb_setup is only used by gbefb_probe then
annotate gbefb_setup with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option
The function __devinit gbefb_probe() references
a variable __initdata mode_option.
If mode_option is only used by gbefb_probe then
annotate mode_option with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode
The function __devinit gbefb_probe() references
a variable __initdata default_mode.
If default_mode is only used by gbefb_probe then
annotate default_mode with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var
The function __devinit gbefb_probe() references
a variable __initdata default_var.
If default_var is only used by gbefb_probe then
annotate default_var with a matching annotation.

Fixing these results in more mismatches:

WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD
The function __devinit gbefb_setup() references
a variable __initdata default_var_LCD.
If default_var_LCD is only used by gbefb_setup then
annotate default_var_LCD with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD
The function __devinit gbefb_setup() references
a variable __initdata default_mode_LCD.
If default_mode_LCD is only used by gbefb_setup then
annotate default_mode_LCD with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT
The function __devinit gbefb_setup() references
a variable __initdata default_var_CRT.
If default_var_CRT is only used by gbefb_setup then
annotate default_var_CRT with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT
The function __devinit gbefb_setup() references
a variable __initdata default_mode_CRT.
If default_mode_CRT is only used by gbefb_setup then
annotate default_mode_CRT with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 23 Jul 2010 20:26:16 +0000 (13:26 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  vmlinux.lds: fix .data..init_task output section (fix popwerpc boot)
  powerpc: Fix erroneous lmb->memblock conversions
  powerpc/mm: Add some debug output when hash insertion fails
  powerpc/mm: Fix bugs in huge page hashing
  powerpc/mm: Move around testing of _PAGE_PRESENT in hash code
  powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge
  powerpc/kexec: Fix boundary case for book-e kexec memory limits

14 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuil...
Linus Torvalds [Fri, 23 Jul 2010 20:25:00 +0000 (13:25 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  nconfig: Fix segfault when help contains special characters
  kbuild: Fix make rpm
  kbuild: Make the setlocalversion script POSIX-compliant

14 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 23 Jul 2010 20:24:02 +0000 (13:24 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
  perf annotate: Fix handling of goto labels that are valid hex numbers
  tracing: Properly align linker defined symbols
  perf symbols: Fix directory descriptor leaking
  perf: Fix various display bugs with parent filtering

14 years agonconfig: Fix segfault when help contains special characters
Stephen Boyd [Fri, 23 Jul 2010 07:04:14 +0000 (00:04 -0700)]
nconfig: Fix segfault when help contains special characters

nconfig segfaults when help text contains the character '%'. For a quick
example, navigate to the kernel compression options and get the help for
bzip2. Doing so triggers a call to mvwprintw() with a string containing
'%' and no extra arguments to fill in the specifier's value. Fix this
case by printing the literal string retrieved from the kconfig.

 #0  0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6
 #1  0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6
 #2  0x00002b52b623991b in _nc_printf_string () from
 /lib/libncursesw.so.5
 #3  0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5
 #4  0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5
 #5  0x00000000004151d8 in fill_window (win=0x21b64c0,
     text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and
     speed is intermediate.\nDecompression speed is slowest among the
     three.  The kernel\nsize is about 10% smaller with bzip2, in
     comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:229
 #6  0x0000000000416335 in show_scroll_win (main_window=0x21a5630,
         title=0x157fa30 "Bzip2",
      text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression
      ratio and speed is intermediate.\nDecompression speed is
      slowest among the three.  The kernel\nsize is about 10%
      smaller with bzip2, in comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:535
 #7  0x00000000004055b2 in show_help (menu=0x157f9d0)
         at scripts/kconfig/nconf.c:1257
 #8  0x0000000000405897 in conf_choice (menu=0x157f130)
      at scripts/kconfig/nconf.c:1321
 #9  0x0000000000405326 in conf (menu=0x157d130) at
      scripts/kconfig/nconf.c:1208
 #10 0x00000000004052e8 in conf (menu=0xb434a0) at
      scripts/kconfig/nconf.c:1203
 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38)

Cc: Michal Marek <mmarek@suse.cz>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
14 years agoMerge commit 'kumar/merge' into merge
Benjamin Herrenschmidt [Fri, 23 Jul 2010 03:46:21 +0000 (13:46 +1000)]
Merge commit 'kumar/merge' into merge

14 years agovmlinux.lds: fix .data..init_task output section (fix popwerpc boot)
Sam Ravnborg [Tue, 13 Jul 2010 09:39:42 +0000 (11:39 +0200)]
vmlinux.lds: fix .data..init_task output section (fix popwerpc boot)

The .data..init_task output section was missing
a load offset causing a popwerpc target to fail to boot.

Sean MacLennan tracked it down to the definition of
INIT_TASK_DATA_SECTION().

There are only two users of INIT_TASK_DATA_SECTION()
in the kernel today: cris and popwerpc.
cris do not support relocatable kernels and is thus not
impacted by this change.

Fix INIT_TASK_DATA_SECTION() to specify load offset like
all other output sections.

Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
14 years agopowerpc: Fix erroneous lmb->memblock conversions
Benjamin Herrenschmidt [Fri, 23 Jul 2010 00:35:52 +0000 (10:35 +1000)]
powerpc: Fix erroneous lmb->memblock conversions

Oooops... we missed these. We incorrectly converted strings
used when parsing the device-tree on pseries, thus breaking
access to drconf memory and hotplug memory.

While at it, also revert some variable names that represent
something the FW calls "lmb" and thus don't need to be converted
to "memblock".

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

14 years agopowerpc/mm: Add some debug output when hash insertion fails
Benjamin Herrenschmidt [Fri, 23 Jul 2010 00:31:13 +0000 (10:31 +1000)]
powerpc/mm: Add some debug output when hash insertion fails

This adds some debug output to our MMU hash code to print out some
useful debug data if the hypervisor refuses the insertion (which
should normally never happen).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

14 years agopowerpc/mm: Fix bugs in huge page hashing
Benjamin Herrenschmidt [Thu, 22 Jul 2010 23:02:27 +0000 (09:02 +1000)]
powerpc/mm: Fix bugs in huge page hashing

There's a couple of nasty bugs lurking in our huge page hashing code.

First, we don't check the access permission atomically with setting
the _PAGE_BUSY bit, which means that the PTE value we end up using
for the hashing might be different than the one we have checked
the access permissions for.

We've seen cases where that leads us to try to use an invalidated
PTE for hashing, causing all sort of "interesting" issues.

Then, we also failed to set _PAGE_DIRTY on a write access.

Finally, a minor tweak but we should return 0 when we find the
PTE busy, in order to just re-execute the access, rather than 1
which means going to do_page_fault().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

14 years agopowerpc/mm: Move around testing of _PAGE_PRESENT in hash code
Benjamin Herrenschmidt [Thu, 22 Jul 2010 22:53:23 +0000 (08:53 +1000)]
powerpc/mm: Move around testing of _PAGE_PRESENT in hash code

Instead of adding _PAGE_PRESENT to the access permission mask
in each low level routine independently, we add it once from
hash_page().

We also move the preliminary access check (the racy one before
the PTE is locked) up so it applies to the huge page case. This
duplicates code in __hash_page_huge() which we'll remove in a
subsequent patch to fix a race in there.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
14 years agopowerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge
Anton Blanchard [Wed, 14 Jul 2010 19:31:48 +0000 (19:31 +0000)]
powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge

If the hypervisor gives us an error on a hugepage insert we panic. The
normal page code already handles this by returning an error instead and we end
calling low_hash_fault which will just kill the task if possible.

The patch below does a similar thing for the hugepage case.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
14 years agoperf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
Conny Seidel [Tue, 6 Jul 2010 15:39:43 +0000 (17:39 +0200)]
perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available

make version 3.80 doesn't support "else ifdef" on the same line, also it
doesn't support unindented nested constructs.

Build fails with:
Makefile:608: Extraneous text after `else' directive
Makefile:611: *** only one `else' per conditional.  Stop.

This patch fixes the build for make 3.80.

Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com>
Signed-off-by: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
14 years agoLinux 2.6.35-rc6
Linus Torvalds [Thu, 22 Jul 2010 19:13:38 +0000 (12:13 -0700)]
Linux 2.6.35-rc6

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 22 Jul 2010 18:46:15 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - relax capability ID checks on newer hardware
  Input: twl40300-keypad - fix handling of "all ground" rows
  Input: gamecon - reference correct pad in gc_psx_command()
  Input: gamecon - reference correct input device in NES mode
  Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
  Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
  Input: qt2160 - rename kconfig symbol name

14 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 22 Jul 2010 18:45:57 +0000 (11:45 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add quirk to make HP DV5000 laptop resume
  drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
  Fix ttm_page_alloc.c build breakage
  drm/radeon/kms: fix legacy LVDS dpms sequence
  drm/radeon/kms: drop taking lock around crtc lookup.

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 22 Jul 2010 18:45:23 +0000 (11:45 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - fix bug in sg_copy_end_to_buffer

14 years agoMerge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 22 Jul 2010 18:45:02 +0000 (11:45 -0700)]
Merge branch 'x86/auditsyscall' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: auditsyscall: fix fastpath return value after reschedule

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Thu, 22 Jul 2010 18:44:26 +0000 (11:44 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

14 years agopowerpc/kexec: Fix boundary case for book-e kexec memory limits
Kumar Gala [Thu, 22 Jul 2010 18:30:44 +0000 (13:30 -0500)]
powerpc/kexec: Fix boundary case for book-e kexec memory limits

The KEXEC_*_MEMORY_LIMITs are inclusive addresses.  We define them as
2Gs as that is what we allow mapping via TLBs.  However, this should be
2G - 1 to be inclusive, otherwise if we have >2G of memory in a system
we fail to boot properly via kexec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoperf annotate: Fix handling of goto labels that are valid hex numbers
Arnaldo Carvalho de Melo [Thu, 22 Jul 2010 17:04:13 +0000 (14:04 -0300)]
perf annotate: Fix handling of goto labels that are valid hex numbers

When parsing the objdump disassembly output we can have goto labels that
are valid hex numbers and thus get confused with lines with machine
code.

Handle the common case of a label that has nothing after it and other
cases where there is just source code by validating the resulting "ip".

It is still possible that we find goto labels that are in the function
address range, but only if they are located before the real address we
should be OK.

A change in the objdump output to have a clear marker separating
addresses from the disassembly would come handy, but we would still have
to deal with older versions.

Reported-by: Gleb Natapov <gleb@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100722170541.GF17631@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
14 years agoCIFS: Fix a malicious redirect problem in the DNS lookup code
David Howells [Thu, 22 Jul 2010 11:53:18 +0000 (12:53 +0100)]
CIFS: Fix a malicious redirect problem in the DNS lookup code

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

# keyctl list 0x2a0ca6c3
1 key in keyring:
726766307: --alswrv     0     0 dns_resolver: foo.bar.com

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrm/radeon/kms: add quirk to make HP DV5000 laptop resume
Alex Deucher [Thu, 22 Jul 2010 03:54:35 +0000 (23:54 -0400)]
drm/radeon/kms: add quirk to make HP DV5000 laptop resume

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062

Reported-by: Andres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoInput: synaptics - relax capability ID checks on newer hardware
Dmitry Torokhov [Wed, 21 Jul 2010 07:01:19 +0000 (00:01 -0700)]
Input: synaptics - relax capability ID checks on newer hardware

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".

Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agox86: auditsyscall: fix fastpath return value after reschedule
Roland McGrath [Thu, 22 Jul 2010 00:44:12 +0000 (17:44 -0700)]
x86: auditsyscall: fix fastpath return value after reschedule

In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls,
we can pass a bad return value and/or error indication for the
system call to audit_syscall_exit().  This happens when
TIF_NEED_RESCHED was set as the system call returned, so we went
out to schedule() and came back to the exit-audit fast-path.  The
fix is to reload the user return value register from the pt_regs
before using it for audit_syscall_exit().

Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit
system call fast paths work slightly differently, so that they
always leave the fast path entirely to reschedule and don't return
there, so they don't have the analogous bugs.

Reported-by: Alexander Viro <aviro@redhat.com>
Signed-off-by: Roland McGrath <roland@redhat.com>
14 years agosysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
Jason Wessel [Thu, 22 Jul 2010 00:27:07 +0000 (19:27 -0500)]
sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
14 years agodebug_core,kdb: fix kgdb_connected bit set in the wrong place
Jason Wessel [Thu, 22 Jul 2010 00:27:07 +0000 (19:27 -0500)]
debug_core,kdb: fix kgdb_connected bit set in the wrong place

Immediately following an exit from the kdb shell the kgdb_connected
variable should be set to zero, unless there are breakpoints planted.
If the kgdb_connected variable is not zeroed out with kdb, it is
impossible to turn off kdb.

This patch is merely a work around for now, the real fix will check
for the breakpoints.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
14 years agoFix merge regression from external kdb to upstream kdb
Jason Wessel [Thu, 22 Jul 2010 00:27:06 +0000 (19:27 -0500)]
Fix merge regression from external kdb to upstream kdb

In the process of merging kdb to the mainline, the kdb lsmod command
stopped printing the base load address of kernel modules.  This is
needed for using kdb in conjunction with external tools such as gdb.

Simply restore the functionality by adding a kdb_printf for the base
load address of the kernel modules.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
14 years agorepair gdbstub to match the gdbserial protocol specification
Jason Wessel [Thu, 22 Jul 2010 00:27:05 +0000 (19:27 -0500)]
repair gdbstub to match the gdbserial protocol specification

The gdbserial protocol handler should return an empty packet instead
of an error string when ever it responds to a command it does not
implement.

The problem cases come from a debugger client sending
qTBuffer, qTStatus, qSearch, qSupported.

The incorrect response from the gdbstub leads the debugger clients to
not function correctly.  Recent versions of gdb will not detach correctly as a result of this behavior.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
14 years agokdb: break out of kdb_ll() when command is terminated
Martin Hicks [Thu, 22 Jul 2010 00:27:05 +0000 (19:27 -0500)]
kdb: break out of kdb_ll() when command is terminated

Without this patch the "ll" linked-list traversal command won't
terminate when you hit q/Q.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
14 years agodrm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
Alex Deucher [Wed, 21 Jul 2010 18:05:35 +0000 (14:05 -0400)]
drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl

Return the crtc_id, not the counter value.  They are not
necessarily the same.

Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoFix ttm_page_alloc.c build breakage
Luck, Tony [Wed, 21 Jul 2010 17:15:39 +0000 (10:15 -0700)]
Fix ttm_page_alloc.c build breakage

The commit 1e8655f87333def92bb8215b423adc65403b08a5
    drm/ttm: Fix build on architectures without AGP

looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h

Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h

Signed-of-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: fix legacy LVDS dpms sequence
Alex Deucher [Wed, 21 Jul 2010 23:37:21 +0000 (19:37 -0400)]
drm/radeon/kms: fix legacy LVDS dpms sequence

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389

Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: drop taking lock around crtc lookup.
Dave Airlie [Wed, 21 Jul 2010 23:57:13 +0000 (09:57 +1000)]
drm/radeon/kms: drop taking lock around crtc lookup.

We only add/remove crtcs at driver load, you cannot remove when
the GPU is running a CS packet since the fd is open, when
GPU hotplugging on radeons actually is needed all this locking
needs a review and I've started re-working kms core locking to deal
with this better. But for now avoid long delays in CS processing when
hotplug detect is happening in a different thread.

this fixes a regression introduced with hotplug detection.

Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:31:15 +0000 (09:31 -0700)]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix 'driver ... did not release config properly' warning

14 years agoMerge branch 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
Linus Torvalds [Wed, 21 Jul 2010 16:30:59 +0000 (09:30 -0700)]
Merge branch 'shrinker' of git://git./linux/kernel/git/dgc/xfsdev

* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  mm: add context argument to shrinker callback to remaining shrinkers

14 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:29:39 +0000 (09:29 -0700)]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Select wm_hubs automatically for WM8994
  ASoC: Remove duplicate AUX definition from WM8776
  ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
  ASoC: wm8727: add a missing return in wm8727_platform_probe
  ASoC: fsi: fixup wrong value setting order of TDM
  ASoC: fsi: fixup clock inversion operation

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:28:50 +0000 (09:28 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  math-emu: correct test for downshifting fraction in _FP_FROM_INT()
  perf: Add DWARF register lookup for sparc
  MAINTAINERS: Add SBUS driver path to sparc entry.
  drivers/sbus: Remove unnecessary casts of private_data
  sparc: remove homegrown L1_CACHE_ALIGN macro
  sparc64: fix the build error due to smp_kgdb_capture_client()
  sparc64: Fix maybe_change_configuration() PCR setting.
  arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference
  sparc64: Update defconfig.
  sunsu: Fix use after free in su_remove().
  sunserial: Don't call add_preferred_console() when console= is specified.
  sparc32: Kill none_mask, it's bogus.

14 years agoFix up trivial spelling errors ('taht' -> 'that')
Linus Torvalds [Wed, 21 Jul 2010 16:25:42 +0000 (09:25 -0700)]
Fix up trivial spelling errors ('taht' -> 'that')

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.

Reported-by: Lucas <canolucas@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokbuild: Fix make rpm
Michal Marek [Thu, 15 Jul 2010 08:36:37 +0000 (10:36 +0200)]
kbuild: Fix make rpm

make rpm was broken by commit 0915512:
make clean
set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl
/bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only >
/usr/src/iwlwifi-2.6/.scmversion
cat: .scmversion: input file is output file
make[1]: *** [rpm] Error 1

Reported-and-tested-by: "Zheng, Jiajia" <jiajia.zheng@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
14 years agopcmcia: fix 'driver ... did not release config properly' warning
Patrick McHardy [Tue, 20 Jul 2010 22:21:42 +0000 (15:21 -0700)]
pcmcia: fix 'driver ... did not release config properly' warning

Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
14 years agomm: add context argument to shrinker callback to remaining shrinkers
Dave Chinner [Wed, 21 Jul 2010 05:33:01 +0000 (15:33 +1000)]
mm: add context argument to shrinker callback to remaining shrinkers

Add the shrinkers missed in the first conversion of the API in
commit 7f8275d0d660c146de6ee3017e1e2e594c49e820 ("mm: add context argument to
shrinker callback").

Signed-off-by: Dave Chinner <dchinner@redhat.com>
14 years agoInput: twl40300-keypad - fix handling of "all ground" rows
Dmitry Torokhov [Wed, 21 Jul 2010 03:25:35 +0000 (20:25 -0700)]
Input: twl40300-keypad - fix handling of "all ground" rows

The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c)
defines a key map for the matrix keypad keyboard. The hardware seems to
use all of the 8 rows and 8 columns of the keypad, although not all
possible locations are used.

The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys
are defined with a row and column number between 0 and 7, except

        KEY(0xff, 2, KEY_F9),
        KEY(0xff, 4, KEY_F10),
        KEY(0xff, 5, KEY_F11),

which represent keycodes that should be emitted when entire row is
connected to the ground.  since the driver handles this case as if we
had an extra column in the key matrix. Unfortunately we do not allocate
enough space and end up owerwriting some random memory.

Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoInput: gamecon - reference correct pad in gc_psx_command()
Dmitry Torokhov [Wed, 21 Jul 2010 03:25:35 +0000 (20:25 -0700)]
Input: gamecon - reference correct pad in gc_psx_command()

Otherwise we won't see any events from the gamepad.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408

Reported-and-tested-by: Eugene Yudin <eugene.yudin@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoInput: gamecon - reference correct input device in NES mode
Dmitry Torokhov [Wed, 21 Jul 2010 03:25:35 +0000 (20:25 -0700)]
Input: gamecon - reference correct input device in NES mode

We moved input devices from 'struct gc' to individial pads (struct
gc-pad), but gc_nes_process_packet() was still trying to use old
ones and crashing.

Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agomath-emu: correct test for downshifting fraction in _FP_FROM_INT()
Mikael Pettersson [Wed, 21 Jul 2010 01:45:14 +0000 (18:45 -0700)]
math-emu: correct test for downshifting fraction in _FP_FROM_INT()

The kernel's math-emu code contains a macro _FP_FROM_INT() which is
used to convert an integer to a raw normalized floating-point value.
It does this basically in three steps:

1. Compute the exponent from the number of leading zero bits.
2. Downshift large fractions to put the MSB in the right position
   for normalized fractions.
3. Upshift small fractions to put the MSB in the right position.

There is an boundary error in step 2, causing a fraction with its
MSB exactly one bit above the normalized MSB position to not be
downshifted.  This results in a non-normalized raw float, which when
packed becomes a massively inaccurate representation for that input.

The impact of this depends on a number of arch-specific factors,
but it is known to have broken emulation of FXTOD instructions
on UltraSPARC III, which was originally reported as GCC bug 44631
<http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44631>.

Any arch which uses math-emu to emulate conversions from integers to
same-size floats may be affected.

The fix is simple: the exponent comparison used to determine if the
fraction should be downshifted must be "<=" not "<".

I'm sending a kernel module to test this as a reply to this message.
There are also SPARC user-space test cases in the GCC bug entry.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 21 Jul 2010 01:29:25 +0000 (18:29 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/r600: fix possible NULL pointer derefernce
  drm/radeon/kms: add quirk for ASUS HD 3600 board
  include/linux/vgaarb.h: add missing part of include guard
  drm/nouveau: Fix crashes during fbcon init on single head cards.
  drm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch
  drm/radeon/kms: fix shared ddc harder
  drm/i915: enable low power render writes on GEN3 hardware.
  drm/i915: Define MI_ARB_STATE bits
  vmwgfx: return -EFAULT if copy_to_user fails
  fb: handle allocation failure in alloc_apertures()
  drm: radeon: check kzalloc() result
  drm/ttm: Fix build on architectures without AGP
  drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
  drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740
  drm/radeon/kms: fix legacy tv-out pal mode

14 years agodrm/r600: fix possible NULL pointer derefernce
Alex Deucher [Wed, 21 Jul 2010 00:29:32 +0000 (10:29 +1000)]
drm/r600: fix possible NULL pointer derefernce

Reported-by: Alexander Y. Fomichev <git.user@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: add quirk for ASUS HD 3600 board
Alex Deucher [Tue, 20 Jul 2010 22:07:22 +0000 (18:07 -0400)]
drm/radeon/kms: add quirk for ASUS HD 3600 board

Connector is actually DVI rather than HDMI.

Reported-by: trapDoor <trapdoor6@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoinclude/linux/vgaarb.h: add missing part of include guard
Doug Goldstein [Tue, 20 Jul 2010 22:22:25 +0000 (15:22 -0700)]
include/linux/vgaarb.h: add missing part of include guard

vgaarb.h was missing the #define of the #ifndef at the top for the guard
to prevent multiple #include's from causing re-define errors

Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Tue, 20 Jul 2010 23:27:58 +0000 (16:27 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: do not include cap/dentry releases in replayed messages
  ceph: reuse request message when replaying against recovering mds
  ceph: fix creation of ipv6 sockets
  ceph: fix parsing of ipv6 addresses
  ceph: fix printing of ipv6 addrs
  ceph: add kfree() to error path
  ceph: fix leak of mon authorizer
  ceph: fix message revocation

14 years agoMerge branch 'linuxdocs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap...
Linus Torvalds [Tue, 20 Jul 2010 23:27:34 +0000 (16:27 -0700)]
Merge branch 'linuxdocs' of git://git./linux/kernel/git/rdunlap/linux-docs

* 'linuxdocs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  documentation: fix almost duplicate filenames (IO/io-mapping.txt)

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 20 Jul 2010 23:26:42 +0000 (16:26 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  bridge: Partially disable netpoll support
  tcp: fix crash in tcp_xmit_retransmit_queue
  IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())
  ibmveth: lost IRQ while closing/opening device leads to service loss
  rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()
  vhost: avoid pr_err on condition guest can trigger
  ipmr: Don't leak memory if fib lookup fails.
  vhost-net: avoid flush under lock
  net: fix problem in reading sock TX queue
  net/core: neighbour update Oops
  net: skb_tx_hash() fix relative to skb_orphan_try()
  rfs: call sock_rps_record_flow() in tcp_splice_read()
  xfrm: do not assume that template resolving always returns xfrms
  hostap_pci: set dev->base_addr during probe
  axnet_cs: use spin_lock_irqsave in ax_interrupt
  dsa: Fix Kconfig dependencies.
  act_nat: not all of the ICMP packets need an IP header payload
  r8169: incorrect identifier for a 8168dp
  Phonet: fix skb leak in pipe endpoint accept()
  Bluetooth: Update sec_level/auth_type for already existing connections
  ...

14 years agovfs: fix RCU-lockdep false positive due to /proc
Paul E. McKenney [Tue, 20 Jul 2010 20:24:34 +0000 (13:24 -0700)]
vfs: fix RCU-lockdep false positive due to /proc

If a single-threaded process does a file-descriptor operation, and some
other process accesses that same file descriptor via /proc, the current
rcu_dereference_check_fdtable() can give a false-positive RCU-lockdep
splat due to the reference count being increased by the /proc access after
the reference-count check in fget_light() but before the check in
rcu_dereference_check_fdtable().

This commit prevents this false positive by checking for a single-threaded
process.  To avoid #include hell, this commit uses the wrapper for
thread_group_empty(current) defined by rcu_my_thread_group_empty()
provided in a separate commit.

Located-by: Miles Lane <miles.lane@gmail.com>
Located-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agosdhci-s3c: add missing remove function
Marek Szyprowski [Tue, 20 Jul 2010 20:24:33 +0000 (13:24 -0700)]
sdhci-s3c: add missing remove function

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoAndres has moved
Andres Salomon [Tue, 20 Jul 2010 20:24:32 +0000 (13:24 -0700)]
Andres has moved

My Collabora address is no longer enabled - update the MODULE_AUTHOR
fields of drivers to my current email address.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agox86,nobootmem: make alloc_bootmem_node fall back to other node when 32bit numa is...
Yinghai Lu [Tue, 20 Jul 2010 20:24:31 +0000 (13:24 -0700)]
x86,nobootmem: make alloc_bootmem_node fall back to other node when 32bit numa is used

Borislav Petkov reported his 32bit numa system has problem:

[    0.000000] Reserving total of 4c00 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 32800 max_low_pfn ~ 375fe
[    0.000000] max_pfn = 238000
[    0.000000] 8202MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 1000 1000 => 34e7000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 200 40 => 34c9d80
[    0.000000] alloc (nid=0 100000 - 7ee00000) (1000000 - ffffffffffffffff) 180 40 => 34e6140
[    0.000000] alloc (nid=1 80000000 - c7e60000) (1000000 - ffffffffffffffff) 240 40 => 80000000
[    0.000000] BUG: unable to handle kernel paging request at 40000000
[    0.000000] IP: [<c2c8cff1>] __alloc_memory_core_early+0x147/0x1d6
[    0.000000] *pdpt = 0000000000000000 *pde = f000ff53f000ff00
...
[    0.000000] Call Trace:
[    0.000000]  [<c2c8b4f8>] ? __alloc_bootmem_node+0x216/0x22f
[    0.000000]  [<c2c90c9b>] ? sparse_early_usemaps_alloc_node+0x5a/0x10b
[    0.000000]  [<c2c9149e>] ? sparse_init+0x1dc/0x499
[    0.000000]  [<c2c79118>] ? paging_init+0x168/0x1df
[    0.000000]  [<c2c780ff>] ? native_pagetable_setup_start+0xef/0x1bb

looks like it allocates too much high address for bootmem.

Try to cut limit with get_max_mapped()

Reported-by: Borislav Petkov <borislav.petkov@amd.com>
Tested-by: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org> [2.6.34.x]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agox86, numa: fix boot without RAM on node0 again
Yinghai Lu [Tue, 20 Jul 2010 20:24:30 +0000 (13:24 -0700)]
x86, numa: fix boot without RAM on node0 again

Commit e534c7c5f8d6 ("numa: x86_64: use generic percpu var
numa_node_id() implementation") broke numa systems that don't have ram
on node0 when MEMORY_HOTPLUG is enabled, because cpu_up() will call
cpu_to_node() before per_cpu(numa_node) is setup for APs.

When Node0 doesn't have RAM, on x86, cpus already round it to nearest
node with RAM in x86_cpu_to_node_map.  and per_cpu(numa_node) is not set
up until in c_init for APs.

When later cpu_up() calling cpu_to_node() will get 0 again, and make it
online even there is no RAM on node0.  so later all APs can not booted up,
and later will have panic.

[    1.611101] On node 0 totalpages: 0
.........
[    2.608558] On node 0 totalpages: 0
[    2.612065] Brought up 1 CPUs
[    2.615199] Total of 1 processors activated (3990.31 BogoMIPS).
...
   93.225341] calling  loop_init+0x0/0x1a4 @ 1
[   93.229314] PERCPU: allocation failed, size=80 align=8, failed to populate
[   93.246539] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc4-tip-yh-04371-gd64e6c4-dirty #354
[   93.264621] Call Trace:
[   93.266533]  [<ffffffff81125e43>] pcpu_alloc+0x83a/0x8e7
[   93.270710]  [<ffffffff81125f15>] __alloc_percpu+0x10/0x12
[   93.285849]  [<ffffffff8140786c>] alloc_disk_node+0x94/0x16d
[   93.291811]  [<ffffffff81407956>] alloc_disk+0x11/0x13
[   93.306157]  [<ffffffff81503e51>] loop_alloc+0xa7/0x180
[   93.310538]  [<ffffffff8277ef48>] loop_init+0x9b/0x1a4
[   93.324909]  [<ffffffff8277eead>] ? loop_init+0x0/0x1a4
[   93.329650]  [<ffffffff810001f2>] do_one_initcall+0x57/0x136
[   93.345197]  [<ffffffff827486d0>] kernel_init+0x184/0x20e
[   93.348146]  [<ffffffff81034954>] kernel_thread_helper+0x4/0x10
[   93.365194]  [<ffffffff81c7cc3c>] ? restore_args+0x0/0x30
[   93.369305]  [<ffffffff8274854c>] ? kernel_init+0x0/0x20e
[   93.386011]  [<ffffffff81034950>] ? kernel_thread_helper+0x0/0x10
[   93.392047] loop: out of memory
...

Try to assign per_cpu(numa_node) early

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: Yinghai <yinghai@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoedac: mpc85xx: add support for MPC8569 EDAC controllers
Anton Vorontsov [Tue, 20 Jul 2010 20:24:28 +0000 (13:24 -0700)]
edac: mpc85xx: add support for MPC8569 EDAC controllers

Simply add a proper ID into the device table.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoedac: mpc85xx: fix MPC85xx dependency
Anton Vorontsov [Tue, 20 Jul 2010 20:24:27 +0000 (13:24 -0700)]
edac: mpc85xx: fix MPC85xx dependency

Since commit 5753c082f66eca5be81f6bda85c1718c5eea6ada ("powerpc/85xx:
Kconfig cleanup"), there is no MPC85xx Kconfig symbol anymore, so the
driver became non-selectable.

This patch fixes the issue by switching to PPC_85xx symbol.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm/vmscan.c: fix mapping use after free
Nick Piggin [Tue, 20 Jul 2010 20:24:25 +0000 (13:24 -0700)]
mm/vmscan.c: fix mapping use after free

We need lock_page_nosync() here because we have no reference to the
mapping when taking the page lock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoipc/sem.c: bugfix for semop() not reporting successful operation
Manfred Spraul [Tue, 20 Jul 2010 20:24:23 +0000 (13:24 -0700)]
ipc/sem.c: bugfix for semop() not reporting successful operation

The last change to improve the scalability moved the actual wake-up out of
the section that is protected by spin_lock(sma->sem_perm.lock).

This means that IN_WAKEUP can be in queue.status even when the spinlock is
acquired by the current task.  Thus the same loop that is performed when
queue.status is read without the spinlock acquired must be performed when
the spinlock is acquired.

Thanks to kamezawa.hiroyu@jp.fujitsu.com for noticing lack of the memory
barrier.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16255

[akpm@linux-foundation.org: clean up kerneldoc, checkpatch warning and whitespace]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Luca Tettamanti <kronos.it@gmail.com>
Reported-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agotracing: Properly align linker defined symbols
Sam Ravnborg [Sat, 10 Jul 2010 06:35:00 +0000 (08:35 +0200)]
tracing: Properly align linker defined symbols

We define a number of symbols in the linker scipt like this:

    __start_syscalls_metadata = .;
    *(__syscalls_metadata)

But we do not know the alignment of "." when we assign
the __start_syscalls_metadata symbol.
gcc started to uses bigger alignment for structs (32 bytes),
so we saw situations where the linker due to alignment
constraints increased the value of "." after the symbol assignment.

This resulted in boot fails.

Fix this by forcing a 32 byte alignment of "." before the
assignment.

This patch introduces the forced alignment for
ftrace_events and syscalls_metadata.
It may be required in more places.

Reported-by: Zeev Tarantov <zeev.tarantov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <20100710063459.GA14596@merkur.ravnborg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
14 years agodrm/nouveau: Fix crashes during fbcon init on single head cards.
Francisco Jerez [Sat, 10 Jul 2010 15:37:00 +0000 (17:37 +0200)]
drm/nouveau: Fix crashes during fbcon init on single head cards.

this fixes a regression since the fbcon rework.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch
Ben Skeggs [Mon, 12 Jul 2010 03:15:44 +0000 (13:15 +1000)]
drm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch

On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS,
which will break some setups.

This patch also removes the different ordering of shadow methods for
pre-nv50 chipsets.  The reason for the different ordering was paranoia,
but it should hopefully be OK to try shadowing PRAMIN first.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: fix shared ddc harder
Alex Deucher [Tue, 20 Jul 2010 15:27:54 +0000 (11:27 -0400)]
drm/radeon/kms: fix shared ddc harder

This fixes a regression caused by b2ea4aa67bfd084834edd070e0a4a47857d6db59
due to the way shared ddc with multiple digital connectors was handled.

You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D

HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital.  A shared DDC line with two
digital connectors is more complex.  You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters.  In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.

Reported-by: trapdoor6@gmail.com
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodocumentation: fix almost duplicate filenames (IO/io-mapping.txt)
Randy Dunlap [Mon, 19 Jul 2010 22:20:27 +0000 (22:20 +0000)]
documentation: fix almost duplicate filenames (IO/io-mapping.txt)

Having both IO-mapping.txt and io-mapping.txt in Documentation/
was confusing and/or bothersome to some people, so rename
IO-mapping.txt to bus-virt-phys-mapping.txt.  Also update
Documentation/00-INDEX for both of these files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kees Bakker <kees.bakker@xs4all.nl>
Cc: Keith Packard <keithp@keithp.com>
14 years agoMerge git://git.infradead.org/users/cbou/battery-2.6.35
Linus Torvalds [Tue, 20 Jul 2010 15:22:15 +0000 (08:22 -0700)]
Merge git://git.infradead.org/users/cbou/battery-2.6.35

* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Fix ds2782_get_capacity return value

14 years agokbuild: Make the setlocalversion script POSIX-compliant
Michał Górny [Sun, 18 Jul 2010 08:26:40 +0000 (10:26 +0200)]
kbuild: Make the setlocalversion script POSIX-compliant

The 'source' builtin is a bash alias to the '.' (dot) builtin. While the
former is supported only by bash, the latter is specified in POSIX and
works fine with all POSIX-compliant shells I am aware of.

The '$_' special parameter is specific to bash. It is partially
supported in dash too but it always evaluates to the current script path
(which causes the script to enter a loop recursively re-executing
itself). This is why I have replaced the two occurences of '$_' with the
explicit parameter.

The 'local' builtin is another example of bash-specific code. Although
it is supported by all POSIX-compliant shells I am aware of, it is not
part of POSIX specification and thus the code should not rely on it
assigning a specific value to the local variable. Moreover, the 'posh'
shell has a limited version of 'local' builtin not supporting direct
variable assignments. Thus, I have broken one of the 'local'
declarations down into a (non-POSIX) 'local' declaration and a plain
(POSIX-compliant) variable assignment.

Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
14 years agoASoC: Select wm_hubs automatically for WM8994
Chanwoo Choi [Tue, 20 Jul 2010 05:28:33 +0000 (14:28 +0900)]
ASoC: Select wm_hubs automatically for WM8994

Otherwise all machine drivers need to do so.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
14 years agobridge: Partially disable netpoll support
Herbert Xu [Mon, 19 Jul 2010 19:26:45 +0000 (19:26 +0000)]
bridge: Partially disable netpoll support

The new netpoll code in bridging contains use-after-free bugs
that are non-trivial to fix.

This patch fixes this by removing the code that uses skbs after
they're freed.

As a consequence, this means that we can no longer call bridge
from the netpoll path, so this patch also removes the controller
function in order to disable netpoll.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrm/i915: enable low power render writes on GEN3 hardware.
Dave Airlie [Tue, 20 Jul 2010 03:15:31 +0000 (13:15 +1000)]
drm/i915: enable low power render writes on GEN3 hardware.

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/i915: Define MI_ARB_STATE bits
Keith Packard [Tue, 20 Jul 2010 04:12:35 +0000 (21:12 -0700)]
drm/i915: Define MI_ARB_STATE bits

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.

Signed-off-by: Keith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agovmwgfx: return -EFAULT if copy_to_user fails
Dan Carpenter [Sat, 10 Jul 2010 14:30:04 +0000 (16:30 +0200)]
vmwgfx: return -EFAULT if copy_to_user fails

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code.  This gets copied to user
space.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agofb: handle allocation failure in alloc_apertures()
Dan Carpenter [Thu, 15 Jul 2010 08:39:47 +0000 (10:39 +0200)]
fb: handle allocation failure in alloc_apertures()

If the kzalloc() fails we should return NULL.  All the places that call
alloc_apertures() check for this already.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Acked-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm: radeon: check kzalloc() result
Kulikov Vasiliy [Fri, 16 Jul 2010 16:13:33 +0000 (20:13 +0400)]
drm: radeon: check kzalloc() result

If kzalloc() fails exit with -ENOMEM.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/ttm: Fix build on architectures without AGP
Ben Hutchings [Sun, 18 Jul 2010 20:51:42 +0000 (21:51 +0100)]
drm/ttm: Fix build on architectures without AGP

Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP.  The use
of the functions declared in it is already conditional.

Reported-by: Geert Stappers <stappers@stappers.nl>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Geert Stappers <stappers@stappers.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoInput: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
Wan ZongShun [Mon, 19 Jul 2010 05:23:19 +0000 (22:23 -0700)]
Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'

The name of platfrom device was changed and we need to make driver's
name match in order for it to bind to the device.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoInput: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
Kamal Mostafa [Mon, 19 Jul 2010 18:00:52 +0000 (11:00 -0700)]
Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table

Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up
i8042 and breaking the touchpad.  Add this model to i8042_dmi_noloop_table[]
to resolve.

BugLink: https://bugs.launchpad.net/bugs/580664
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoMerge branch 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
Linus Torvalds [Tue, 20 Jul 2010 03:18:24 +0000 (20:18 -0700)]
Merge branch 'shrinker' of git://git./linux/kernel/git/dgc/xfsdev

* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  xfs: track AGs with reclaimable inodes in per-ag radix tree
  xfs: convert inode shrinker to per-filesystem contexts
  mm: add context argument to shrinker callback

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Tue, 20 Jul 2010 02:33:02 +0000 (19:33 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix checks in BTRFS_IOC_CLONE_RANGE
  Btrfs: fix CLONE ioctl destination file size expansion to block boundary
  Btrfs: fix split_leaf double split corner case

14 years agoxfs: track AGs with reclaimable inodes in per-ag radix tree
Dave Chinner [Mon, 19 Jul 2010 23:43:39 +0000 (09:43 +1000)]
xfs: track AGs with reclaimable inodes in per-ag radix tree

https://bugzilla.kernel.org/show_bug.cgi?id=16348

When the filesystem grows to a large number of allocation groups,
the summing of recalimable inodes gets expensive. In many cases,
most AGs won't have any reclaimable inodes and so we are wasting CPU
time aggregating over these AGs. This is particularly important for
the inode shrinker that gets called frequently under memory
pressure.

To avoid the overhead, track AGs with reclaimable inodes in the
per-ag radix tree so that we can find all the AGs with reclaimable
inodes via a simple gang tag lookup. This involves setting the tag
when the first reclaimable inode is tracked in the AG, and removing
the tag when the last reclaimable inode is removed from the tree.
Then the summation process becomes a loop walking the radix tree
summing AGs with the reclaim tag set.

This significantly reduces the overhead of scanning - a 6400 AG
filesystea now only uses about 25% of a cpu in kswapd while slab
reclaim progresses instead of being permanently stuck at 100% CPU
and making little progress. Clean filesystems filesystems will see
no overhead and the overhead only increases linearly with the number
of dirty AGs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
14 years agoxfs: convert inode shrinker to per-filesystem contexts
Dave Chinner [Mon, 19 Jul 2010 22:07:02 +0000 (08:07 +1000)]
xfs: convert inode shrinker to per-filesystem contexts

Now the shrinker passes us a context, wire up a shrinker context per
filesystem. This allows us to remove the global mount list and the
locking problems that introduced. It also means that a shrinker call
does not need to traverse clean filesystems before finding a
filesystem with reclaimable inodes.  This significantly reduces
scanning overhead when lots of filesystems are present.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
14 years agoBtrfs: fix checks in BTRFS_IOC_CLONE_RANGE
Dan Rosenberg [Mon, 19 Jul 2010 20:58:20 +0000 (16:58 -0400)]
Btrfs: fix checks in BTRFS_IOC_CLONE_RANGE

1.  The BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE ioctls should check
whether the donor file is append-only before writing to it.

2.  The BTRFS_IOC_CLONE_RANGE ioctl appears to have an integer
overflow that allows a user to specify an out-of-bounds range to copy
from the source file (if off + len wraps around).  I haven't been able
to successfully exploit this, but I'd imagine that a clever attacker
could use this to read things he shouldn't.  Even if it's not
exploitable, it couldn't hurt to be safe.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>
14 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 19 Jul 2010 20:19:32 +0000 (13:19 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pci, mrst: Add extra sanity check in walking the PCI extended cap chain
  x86: Fix x2apic preenabled system with kexec
  x86: Force HPET readback_cmp for all ATI chipsets

14 years agoMerge branch 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas...
Linus Torvalds [Mon, 19 Jul 2010 20:18:34 +0000 (13:18 -0700)]
Merge branch 'kmemleak' of git://git./linux/kernel/git/cmarinas/linux-2.6-cm

* 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Add support for NO_BOOTMEM configurations
  kmemleak: Annotate false positive in init_section_page_cgroup()

14 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 19 Jul 2010 20:18:05 +0000 (13:18 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix potential overflow in chpid descriptor
  [S390] add missing device put
  [S390] dasd: use correct label location for diag fba disks

14 years agointel_scu_ipc: Oops/crash fixes
Sreedhara DS [Mon, 19 Jul 2010 08:37:42 +0000 (09:37 +0100)]
intel_scu_ipc: Oops/crash fixes

- fix reversing of command/sub arguments
- fix a crash if the i2c interface is called before the device is found

Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoBtrfs: fix CLONE ioctl destination file size expansion to block boundary
Sage Weil [Sat, 12 Jun 2010 22:31:14 +0000 (22:31 +0000)]
Btrfs: fix CLONE ioctl destination file size expansion to block boundary

The CLONE and CLONE_RANGE ioctls round up the range of extents being
cloned to the block size when the range to clone extends to the end of file
(this is always the case with CLONE).  It was then using that offset when
extending the destination file's i_size.  Fix this by not setting i_size
beyond the originally requested ending offset.

This bug was introduced by a22285a6 (2.6.35-rc1).

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>