GitHub/exynos8895/android_kernel_samsung_universal8895.git
16 years agomac80211: consolidate deauth/disassoc
Johannes Berg [Tue, 9 Sep 2008 08:58:25 +0000 (10:58 +0200)]
mac80211: consolidate deauth/disassoc

deauth and disassoc frames are completely identical so there's
little point in having two functions to send them rather than
one that gets a parameter. This same a bit of code size.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: reorder frame code in mlme
Johannes Berg [Tue, 9 Sep 2008 08:57:09 +0000 (10:57 +0200)]
mac80211: reorder frame code in mlme

This reorders all frame sending functions to be at the top of the
file. When reading the file, I tend to be looking at either the
frame code or the state machine, and having them mixed in the file
is confusing. When all frame sending is at the top the remainder
of the file is more readable, in my opinion.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: remove useless 'ibss' parameter
Johannes Berg [Tue, 9 Sep 2008 07:32:59 +0000 (09:32 +0200)]
mac80211: remove useless 'ibss' parameter

Ever since we refactored beaconing to not be controlled by a
fake queue this parameter to ieee80211_sta_def_wmm_params
has been unused.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: simplify scan start
Johannes Berg [Mon, 8 Sep 2008 15:58:23 +0000 (17:58 +0200)]
mac80211: simplify scan start

ieee80211_sta_start_scan() can very well take a non-NULL
ssid pointer with a zero ssid_len.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: clarify scan request
Johannes Berg [Mon, 8 Sep 2008 15:47:23 +0000 (17:47 +0200)]
mac80211: clarify scan request

When a scan is requested for non-STA interfaces, we simply fire
off a scan, but for STA interfaces we shouldn't because they
could be in the middle of an association. This clarifies the
corresponding code.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: move some HT code out of main.c
Johannes Berg [Mon, 8 Sep 2008 15:44:29 +0000 (17:44 +0200)]
mac80211: move some HT code out of main.c

Now that I've created ht.c, I can move the aggregation
code from main.c into it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: move some HT code out of mlme.c
Johannes Berg [Mon, 8 Sep 2008 15:44:28 +0000 (17:44 +0200)]
mac80211: move some HT code out of mlme.c

Some of the HT code in mlme.c is misplaced:
 * constants/definitions belong to the ieee80211.h header
 * code being used in other modes as well shouldn't be there

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: move BSS handling to scan code
Johannes Berg [Mon, 8 Sep 2008 15:44:27 +0000 (17:44 +0200)]
mac80211: move BSS handling to scan code

This moves all the BSS list handling out of mlme.c to scan.c,
no further changes except fixing kzalloc/atomic_inc/atomic_inc
to kzalloc/atomic_set(2).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: refactor and move scan RX code
Johannes Berg [Mon, 8 Sep 2008 15:44:26 +0000 (17:44 +0200)]
mac80211: refactor and move scan RX code

This patch refactors some code and moves the scan RX function
to scan.c. More importantly, however, it changes it so that the
MLME's beacon/probe_resp functions aren't invoked when scanning
so that we can remove a "if (scanning)" conditions from two
places.

There's a very slight behavioural change in this patch: now,
when scanning, IBSS and mesh aren't updated even on the same
channel.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: start moving scan code from mlme
Johannes Berg [Mon, 8 Sep 2008 15:44:25 +0000 (17:44 +0200)]
mac80211: start moving scan code from mlme

Here's a first patch to move some code from mlme.c to a
new file called scan.c. The end result will hopefully be
a more manageable mlme.c.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: remove useless non-NULL tests from scan results code
Johannes Berg [Mon, 8 Sep 2008 15:44:24 +0000 (17:44 +0200)]
mac80211: remove useless non-NULL tests from scan results code

I'm surprised nobody complained about these before. What a waste.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: use sdata pointer for scan interface
Johannes Berg [Mon, 8 Sep 2008 15:44:23 +0000 (17:44 +0200)]
mac80211: use sdata pointer for scan interface

Since we now use sdata pointers most of the time, using a netdev
pointer here is somewhat artificial, use an sdata pointer instead.
Replace a netdev-prefix in a few messages by a wiphy-prefix.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: reorder mlme code
Johannes Berg [Mon, 8 Sep 2008 15:44:22 +0000 (17:44 +0200)]
mac80211: reorder mlme code

This reorders the mlme code a bit so we don't need all the forward
function declarations. It also removes the ERP_INFO_USE_PROTECTION
define that is unused, but otherwise contains no real changes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: stop queues before carrier off
Tomas Winkler [Mon, 8 Sep 2008 15:33:40 +0000 (17:33 +0200)]
mac80211: stop queues before carrier off

During testing of the disassociation fixes, Tomas noticed that it
was possible to run into a situation where you'd suddenly get a
few "wlan0: dropped frame to <AP> (unauthorized port)" messages
and I found this to be due to the AP's sta_info having been
removed but netif_carrier_off not having removed/stopped traffic
yet. To avoid that, stop the queue for the interface (and avoid
bringing them up when another vif scans when they weren't up.)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: remove disassociation code from ieee80211_set_associated
Tomas Winkler [Mon, 8 Sep 2008 15:33:39 +0000 (17:33 +0200)]
mac80211: remove disassociation code from ieee80211_set_associated

This patch moves disassociation code from ieee80211_set_associated
to ieee80211_set_disassoc. To reduce code duplication, it introduces
the ieee80211_sta_send_apinfo function. Additionally, it fixes a lapse
where BSS_CHANGED_HT wasn't set when notifying the driver of changes
due to disassociation.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: disassociate when moving to new BSS
Tomas Winkler [Mon, 8 Sep 2008 15:33:38 +0000 (17:33 +0200)]
mac80211: disassociate when moving to new BSS

This patch makes the MLME cleanly disassociate from the current BSS
when leaving it for a new one. This is not just nicer to the old AP
(we're leaving it, might as well tell it!) but also required for some
drivers that keep track of the station we're associated with, they'd
get confused because they'd think we are associated with two APs.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: restructure disassoc/deauth flows
Tomas Winkler [Mon, 8 Sep 2008 21:32:12 +0000 (00:32 +0300)]
mac80211: restructure disassoc/deauth flows

This patch restructure the flow of disassociation and deauthentication
flows to be consistent under all circumstances.
It ensures that BA session is treated down before deauthentication or disassociation,
adds the removal of the obsolete sta form station table and fixes a related bug (sta_info_destroy
without sta_info_unlink) in ieee80211_associated()
and reduce some code duplication

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Revert "rt2x00: Fix the beacon length bug"
Ivo van Doorn [Mon, 8 Sep 2008 15:31:49 +0000 (17:31 +0200)]
rt2x00: Revert "rt2x00: Fix the beacon length bug"

This reverts:
b93ce437eba7e0232683326f30d9d1167a872fad
rt2x00: Fix the beacon length bug

The workaround is no longer required since it has been
correctly fixed in rt2x00usb now.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: move IE parsing to util file
Johannes Berg [Mon, 8 Sep 2008 14:40:36 +0000 (16:40 +0200)]
mac80211: move IE parsing to util file

Since IE parsing is required for the mlme and mesh code, it's
not a static function anyway, and it's much better to have it
in util rather than the overly large mlme.c

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix typo in action frame handling
Johannes Berg [Mon, 8 Sep 2008 14:31:48 +0000 (16:31 +0200)]
mac80211: fix typo in action frame handling

This says chan_switch.action_code but really means
measurement.action_code, of course the actual offset in
the frame is the same, it's just harder to understand
this way.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix action frame length checks
Johannes Berg [Mon, 8 Sep 2008 13:41:59 +0000 (15:41 +0200)]
mac80211: fix action frame length checks

The action frame length checks are one too small, there's not just
an action code as the comment makes you believe, there's a category
code too, and the category code is required in each action frame
(hence part of IEEE80211_MIN_ACTION_SIZE).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: BSS info: check channel first
Johannes Berg [Mon, 8 Sep 2008 09:05:10 +0000 (11:05 +0200)]
mac80211: BSS info: check channel first

When we receive information about a BSS we check at some point
whether or not we think we're allowed to use the channel it is
on, but we do that fairly late. I don't think we should do it
that late, so do it earlier to avoid doing IBSS/mesh stuff on
that channel and then getting confused because it's disabled.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: make conf_tx non-atomic
Johannes Berg [Mon, 8 Sep 2008 09:05:09 +0000 (11:05 +0200)]
mac80211: make conf_tx non-atomic

The conf_tx callback currently needs to be atomic, this requirement
is just because it can be called from scanning. This rearranges it
slightly to only update while not scanning (which is fine, we'll be
getting beacons when associated) and thus removes the atomic
requirement.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: move some RCU locking into an if branch
Johannes Berg [Mon, 8 Sep 2008 09:05:08 +0000 (11:05 +0200)]
mac80211: move some RCU locking into an if branch

The if itself doesn't need to be protected, so move in the RCU
locking to avoid doing anything at all when the condition isn't
true.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agob43legacy: Fix to enhance TX speed
Ehud Gavron [Sun, 7 Sep 2008 04:30:00 +0000 (21:30 -0700)]
b43legacy: Fix to enhance TX speed

Recent changes in the specifications have improved the performance
of the BCM4306/2 devices that use b43legacy as the driver. These
"errors" in the specs have been present from the very first implementation
of bcm43xx.

Signed-off-by: Ehud Gavron <gavron@wetwork.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agob43legacy: Fix failure in rate-adjustment mechanism
Larry Finger [Sat, 6 Sep 2008 21:51:22 +0000 (16:51 -0500)]
b43legacy: Fix failure in rate-adjustment mechanism

A coding error present since b43legacy was incorporated into the
kernel has prevented the driver from using the rate-setting mechanism
of mac80211. The driver has been forced to remain at a 1 Mb/s rate.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.26], [2.6.25]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agob43: Remove QoS update workqueue
Michael Buesch [Sat, 6 Sep 2008 18:07:31 +0000 (20:07 +0200)]
b43: Remove QoS update workqueue

We don't need the workqueue anymore, as we can now sleep in the callback.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agob43 G-PHY: Remove mmiowb()
Michael Buesch [Sat, 6 Sep 2008 17:28:55 +0000 (19:28 +0200)]
b43 G-PHY: Remove mmiowb()

It causes compile errors on m68k and it is not needed.
Remove it.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agob43: Fix QoS defaults
Michael Buesch [Sat, 6 Sep 2008 14:21:47 +0000 (16:21 +0200)]
b43: Fix QoS defaults

This fixes the initialization of the default QoS parameters.
This got broken by "wireless: fix warnings from QoS patch".

Reported-by: Lorenzo Nava
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: 802.11a 5GHz phy support
Christian Lamparter [Sat, 6 Sep 2008 12:25:58 +0000 (14:25 +0200)]
p54: 802.11a 5GHz phy support

This patch brings the 5GHz Phy in any prism54 devices (of course, only those who have one) to life.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: control output power levels
Christian Lamparter [Sat, 6 Sep 2008 12:25:53 +0000 (14:25 +0200)]
p54: control output power levels

I hope this patch is enough to cover at least the basic requirements of IEEE 802.11h's TPC.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: add lots of useful rx/tx statistics
Christian Lamparter [Sat, 6 Sep 2008 00:56:23 +0000 (02:56 +0200)]
p54: add lots of useful rx/tx statistics

The firmware can provide lots of useful statistics about noise floor,
mac time and lots of numbers about successful transfers and dropped
frames.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: add more rx filters
Christian Lamparter [Sat, 6 Sep 2008 00:56:12 +0000 (02:56 +0200)]
p54: add more rx filters

This patch adds new filters settings to make the card more useful in monitor mode.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: 32-bit tsf timestamps
Christian Lamparter [Sat, 6 Sep 2008 00:56:04 +0000 (02:56 +0200)]
p54: 32-bit tsf timestamps

tcpdump:
02:15:42.874518 61112184us tsft 48.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] CF +QoS Data IV
02:15:42.874557 >>>4356079526us<<< tsft 24.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] Acknowledgment
02:15:42.976844 61214513us tsft 1.0 Mb/s 2437 MHz (0x0480) antenna 0 [0x0000000e] Beacon

as one can see on the huge jump, it's very plausible that firmware does not report the
full 64-bit mac time, just the lower 32bit and some kinds of flags...
Therefore if we want a useful timestamp we have to emulate the high bits.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: fix compile warning
Zhu Yi [Wed, 3 Sep 2008 03:26:57 +0000 (11:26 +0800)]
iwlwifi: fix compile warning

The patch fixes compile warning for ‘iwl4965_hw_channel_switch’ defined
but not used.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: remove uneeded declarations
Emmanuel Grumbach [Wed, 3 Sep 2008 03:26:56 +0000 (11:26 +0800)]
iwlwifi: remove uneeded declarations

This patch cleans up iwlwifi by removing uneeded declarations and removing
uneeded symbol export reducing the namespace pollution. It also fixes some
typos in comments.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: use the results from disconnected antenna algorithm
Grumbach, Emmanuel [Wed, 3 Sep 2008 03:26:53 +0000 (11:26 +0800)]
iwlwifi: use the results from disconnected antenna algorithm

This patch makes usage of the results from disconnected antenna alg to
know how many antennas are connected.

It also synchronizes between the chain noise alg and the W/A that
disables power management during association. All the antennas must be
enables during the chain noise algorithm. Hence, power management is
restored only after the completion of the algorithm.

In the future, we will need to update the AP that we don't support MIMO
if there is only one antenna connected. We also need to update the rate
scaling algorithm.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: rename ps_mode to sm_ps
Ron Rindjunsky [Wed, 3 Sep 2008 03:26:47 +0000 (11:26 +0800)]
iwlwifi: rename ps_mode to sm_ps

This patch renames iwl_priv.ps_mode for clearer
iwl_priv.current_ht_config.sm_ps (spatial multiplexing power save).

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: change MIMO_PS to SM_PS
Tomas Winkler [Wed, 3 Sep 2008 03:26:42 +0000 (11:26 +0800)]
mac80211: change MIMO_PS to SM_PS

This patch follows 11n spec naming more rigorously replacing MIMO_PS
with SM_PS (Spatial Multiplexing Power Save).

(Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS",
"iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS",
and "iwlwifi: remove double definition of SM PS". -- JWL)

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoipv6: On interface down/unregister, purge icmp routes too.
David S. Miller [Thu, 11 Sep 2008 00:27:15 +0000 (17:27 -0700)]
ipv6: On interface down/unregister, purge icmp routes too.

Johannes Berg reported that occaisionally, bringing an interface
down or unregistering it would hang for up to 30 seconds.  Using
debugging output he provided it became clear that ICMP6 routes
were the culprit.

The problem is that ICMP6 routes live in their own world totally
separate from normal ipv6 routes.  So there are all kinds of special
cases throughout the ipv6 code to handle this.

While we should really try to unify all of this stuff somehow,
for the time being let's fix this by purging the ICMP6 routes
that match the device in question during rt6_ifdown().

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipsec: Add missing list_del() in xfrm_state_gc_task().
David S. Miller [Wed, 10 Sep 2008 05:13:28 +0000 (22:13 -0700)]
ipsec: Add missing list_del() in xfrm_state_gc_task().

Otherwise entries stay on the GC todo list forever, even after we free
them.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipsec: Use RCU-like construct for saved state within a walk
Herbert Xu [Wed, 10 Sep 2008 02:58:29 +0000 (19:58 -0700)]
ipsec: Use RCU-like construct for saved state within a walk

Now that we save states within a walk we need synchronisation
so that the list the saved state is on doesn't disappear from
under us.

As it stands this is done by keeping the state on the list which
is bad because it gets in the way of the management of the state
life-cycle.

An alternative is to make our own pseudo-RCU system where we use
counters to indicate which state can't be freed immediately as
it may be referenced by an ongoing walk when that resumes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'lvs-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms...
David S. Miller [Wed, 10 Sep 2008 02:51:04 +0000 (19:51 -0700)]
Merge branch 'lvs-next-2.6' of git://git./linux/kernel/git/horms/lvs-2.6

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Wed, 10 Sep 2008 02:28:03 +0000 (19:28 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 into lvs-next-2.6
Simon Horman [Tue, 9 Sep 2008 23:14:52 +0000 (09:14 +1000)]
Merge git://git./linux/kernel/git/davem/net-next-2.6 into lvs-next-2.6

16 years agoipsec: Make xfrm_larval_drop default to 1.
David S. Miller [Tue, 9 Sep 2008 23:08:51 +0000 (16:08 -0700)]
ipsec: Make xfrm_larval_drop default to 1.

The previous default behavior is definitely the least user
friendly.  Hanging there forever just because the keying
daemon is wedged or the refreshing of the policy can't move
forward is anti-social to say the least.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv6: Fix OOPS in ip6_dst_lookup_tail().
Neil Horman [Tue, 9 Sep 2008 20:51:35 +0000 (13:51 -0700)]
ipv6: Fix OOPS in ip6_dst_lookup_tail().

This fixes kernel bugzilla 11469: "TUN with 1024 neighbours:
ip6_dst_lookup_tail NULL crash"

dst->neighbour is not necessarily hooked up at this point
in the processing path, so blindly dereferencing it is
the wrong thing to do.  This NULL check exists in other
similar paths and this case was just an oversight.

Also fix the completely wrong and confusing indentation
here while we're at it.

Based upon a patch by Evgeniy Polyakov.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipsec: Restore larval states and socket policies in dump
Herbert Xu [Tue, 9 Sep 2008 12:23:37 +0000 (05:23 -0700)]
ipsec: Restore larval states and socket policies in dump

The commit commit 4c563f7669c10a12354b72b518c2287ffc6ebfb3 ("[XFRM]:
Speed up xfrm_policy and xfrm_state walking") inadvertently removed
larval states and socket policies from netlink dumps.  This patch
restores them.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6
David S. Miller [Tue, 9 Sep 2008 12:09:24 +0000 (05:09 -0700)]
Merge branch 'master' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6

16 years agobnx2x: EEH recovery fix
Yitchak Gertner [Tue, 9 Sep 2008 12:07:25 +0000 (05:07 -0700)]
bnx2x: EEH recovery fix

When EEH detects an i/o error it resets the device thus it cannot be accessed.
In this case the driver needs to unload its interface only with OS, kernel and
network stack but not with the device.
After successful recovery, the driver can load normally.

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoThis reverts "Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp"
Gerrit Renker [Tue, 9 Sep 2008 11:27:22 +0000 (13:27 +0200)]
This reverts "Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp"
as it accentally contained the wrong set of patches. These will be
submitted separately.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluet...
David S. Miller [Tue, 9 Sep 2008 09:11:11 +0000 (02:11 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6

16 years ago[Bluetooth] Reject L2CAP connections on an insecure ACL link
Marcel Holtmann [Tue, 9 Sep 2008 05:19:20 +0000 (07:19 +0200)]
[Bluetooth] Reject L2CAP connections on an insecure ACL link

The Security Mode 4 of the Bluetooth 2.1 specification has strict
authentication and encryption requirements. It is the initiators job
to create a secure ACL link. However in case of malicious devices, the
acceptor has to make sure that the ACL is encrypted before allowing
any kind of L2CAP connection. The only exception here is the PSM 1 for
the service discovery protocol, because that is allowed to run on an
insecure ACL link.

Previously it was enough to reject a L2CAP connection during the
connection setup phase, but with Bluetooth 2.1 it is forbidden to
do any L2CAP protocol exchange on an insecure link (except SDP).

The new hci_conn_check_link_mode() function can be used to check the
integrity of an ACL link. This functions also takes care of the cases
where Security Mode 4 is disabled or one of the devices is based on
an older specification.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years ago[Bluetooth] Enforce correct authentication requirements
Marcel Holtmann [Tue, 9 Sep 2008 05:19:20 +0000 (07:19 +0200)]
[Bluetooth] Enforce correct authentication requirements

With the introduction of Security Mode 4 and Simple Pairing from the
Bluetooth 2.1 specification it became mandatory that the initiator
requires authentication and encryption before any L2CAP channel can
be established. The only exception here is PSM 1 for the service
discovery protocol (SDP). It is meant to be used without any encryption
since it contains only public information. This is how Bluetooth 2.0
and before handle connections on PSM 1.

For Bluetooth 2.1 devices the pairing procedure differentiates between
no bonding, general bonding and dedicated bonding. The L2CAP layer
wrongly uses always general bonding when creating new connections, but it
should not do this for SDP connections. In this case the authentication
requirement should be no bonding and the just-works model should be used,
but in case of non-SDP connection it is required to use general bonding.

If the new connection requires man-in-the-middle (MITM) protection, it
also first wrongly creates an unauthenticated link key and then later on
requests an upgrade to an authenticated link key to provide full MITM
protection. With Simple Pairing the link key generation is an expensive
operation (compared to Bluetooth 2.0 and before) and doing this twice
during a connection setup causes a noticeable delay when establishing
a new connection. This should be avoided to not regress from the expected
Bluetooth 2.0 connection times. The authentication requirements are known
up-front and so enforce them.

To fulfill these requirements the hci_connect() function has been extended
with an authentication requirement parameter that will be stored inside
the connection information and can be retrieved by userspace at any
time. This allows the correct IO capabilities exchange and results in
the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years ago[Bluetooth] Fix reference counting during ACL config stage
Marcel Holtmann [Tue, 9 Sep 2008 05:19:19 +0000 (07:19 +0200)]
[Bluetooth] Fix reference counting during ACL config stage

The ACL config stage keeps holding a reference count on incoming
connections when requesting the extended features. This results in
keeping an ACL link up without any users. The problem here is that
the Bluetooth specification doesn't define an ownership of the ACL
link and thus it can happen that the implementation on the initiator
side doesn't care about disconnecting unused links. In this case the
acceptor needs to take care of this.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
16 years agoMerge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp
David S. Miller [Tue, 9 Sep 2008 00:28:59 +0000 (17:28 -0700)]
Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp

Conflicts:

net/dccp/input.c
net/dccp/options.c

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
David S. Miller [Mon, 8 Sep 2008 23:59:05 +0000 (16:59 -0700)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6

Conflicts:

net/mac80211/mlme.c

16 years agoipvs: Embed user stats structure into kernel stats structure
Sven Wegener [Mon, 8 Sep 2008 11:39:04 +0000 (13:39 +0200)]
ipvs: Embed user stats structure into kernel stats structure

Instead of duplicating the fields, integrate a user stats structure into
the kernel stats structure. This is more robust when the members are
changed, because they are now automatically kept in sync.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Reviewed-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
16 years agoipvs: Restrict connection table size via Kconfig
Sven Wegener [Mon, 8 Sep 2008 11:38:11 +0000 (13:38 +0200)]
ipvs: Restrict connection table size via Kconfig

Instead of checking the value in include/net/ip_vs.h, we can just
restrict the range in our Kconfig file. This will prevent values outside
of the range early.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Reviewed-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
16 years agoIPVS: Remove incorrect ip_route_me_harder(), fix IPv6
Julius Volz [Mon, 8 Sep 2008 12:55:42 +0000 (14:55 +0200)]
IPVS: Remove incorrect ip_route_me_harder(), fix IPv6

Remove an incorrect ip_route_me_harder() that was probably a result of
merging my IPv6 patches with the local client patches. With this, IPv6+NAT
are working again.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
16 years agoipvs: handle PARTIAL_CHECKSUM
Simon Horman [Mon, 8 Sep 2008 02:04:21 +0000 (12:04 +1000)]
ipvs: handle PARTIAL_CHECKSUM

Now that LVS can load balance locally generated traffic, packets may come
from the loopback device and thus may have a partial checksum.

The existing code allows for the case where there is no checksum at all for
TCP, however Herbert Xu has confirmed that this is not legal.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julius Volz <juliusv@google.com>
16 years agonetns bridge: cleanup bridges during netns stop
Alexey Dobriyan [Mon, 8 Sep 2008 23:20:18 +0000 (16:20 -0700)]
netns bridge: cleanup bridges during netns stop

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Hemminger <shemming@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonetns bridge: allow bridges in netns!
Alexey Dobriyan [Mon, 8 Sep 2008 23:19:58 +0000 (16:19 -0700)]
netns bridge: allow bridges in netns!

Bridge as netdevice doesn't cross netns boundaries.

Bridge ports and bridge itself live in same netns.

Notifiers are fixed.

netns propagated from userspace socket for setup and teardown.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Hemminger <shemming@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agowarn: Turn the netdev timeout WARN_ON() into a WARN()
Arjan van de Ven [Mon, 8 Sep 2008 23:17:42 +0000 (16:17 -0700)]
warn: Turn the netdev timeout WARN_ON() into a WARN()

this patch turns the netdev timeout WARN_ON_ONCE() into a WARN_ONCE(),
so that the device and driver names are inside the warning message.
This helps automated tools like kerneloops.org to collect the data
and do statistics, as well as making it more likely that humans
cut-n-paste the important message as part of a bugreport.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 8 Sep 2008 23:10:53 +0000 (16:10 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6

16 years agonet: Enable TSO if supported by at least one device
Herbert Xu [Mon, 8 Sep 2008 23:10:02 +0000 (16:10 -0700)]
net: Enable TSO if supported by at least one device

As it stands users of netdev_compute_features (e.g., bridges/bonding)
will only enable TSO if all consituent devices support it.  This
is unnecessarily pessimistic since even on devices that do not
support hardware TSO and SG, emulated TSO still performs to a par
with TSO off.

This patch enables TSO if at least on constituent device supports
it in hardware.

The direct beneficiaries will be virtualisation that uses bridging
since this means that TSO will always be enabled for communication
from the host to the guests.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Linus Torvalds [Mon, 8 Sep 2008 22:55:18 +0000 (15:55 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/hskinnemoen/avr32-2.6

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: pm_standby low-power ram bug fix
  avr32: Fix lockup after Java stack underflow in user mode

16 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Mon, 8 Sep 2008 22:54:32 +0000 (15:54 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix rare boot build breakage
  powerpc/spufs: Fix possible scheduling of a context to multiple SPEs
  powerpc/spufs: Fix race for a free SPU
  powerpc/spufs: Fix multiple get_spu_context()

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Mon, 8 Sep 2008 22:51:12 +0000 (15:51 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "crypto: camellia - Use kernel-provided bitops, unaligned access helpers"

16 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 8 Sep 2008 22:50:19 +0000 (15:50 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5241/1: provide ioremap_wc()
  [ARM] omap: fix virtual vs physical address space confusions
  [ARM] remove unused #include <version.h>
  [ARM] omap: fix build error in ohci-omap.c
  [ARM] omap: fix gpio.c build error

16 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 8 Sep 2008 22:47:21 +0000 (15:47 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: arch_reinit_sched_domains() must destroy domains to force rebuild
  sched, cpuset: rework sched domains and CPU hotplug handling (v4)

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Mon, 8 Sep 2008 22:46:56 +0000 (15:46 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs
  pata_sil680: remove duplicate pcim_enable_device
  libata-sff: kill spurious WARN_ON() in ata_hsm_move()
  sata_nv: disable hardreset for generic
  ahci: disable PMP for marvell ahcis
  sata_mv: add RocketRaid 1720 PCI ID to driver
  ahci, pata_marvell: play nicely together

16 years agoFix format of MAINTAINERS
Uwe Kleine-König [Mon, 8 Sep 2008 22:11:39 +0000 (00:11 +0200)]
Fix format of MAINTAINERS

... one entry lacked a colon which broke one of my scripts.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 8 Sep 2008 22:43:44 +0000 (15:43 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bridge: don't allow setting hello time to zero
  netns : fix kernel panic in timewait socket destruction
  pkt_sched: Fix qdisc state in net_tx_action()
  netfilter: nf_conntrack_irc: make sure string is terminated before calling simple_strtoul
  netfilter: nf_conntrack_gre: nf_ct_gre_keymap_flush() fixlet
  netfilter: nf_conntrack_gre: more locking around keymap list
  netfilter: nf_conntrack_sip: de-static helper pointers

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 8 Sep 2008 22:43:02 +0000 (15:43 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Prevent sparc64 from invoking irq handlers on offline CPUs
  sparc64: Fix IPI call locking.

16 years agousb: fix null deferences in low level usb serial
Jason Wessel [Mon, 8 Sep 2008 13:53:37 +0000 (14:53 +0100)]
usb: fix null deferences in low level usb serial

The hw interface drivers for the usb serial devices deference the tty
structure to set up the parameters for the initial console.  The tty
structure should be passed as a parameter to the set_termios() call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoNFS: Restore missing hunk in NFS mount option parser
Chuck Lever [Mon, 8 Sep 2008 15:58:13 +0000 (11:58 -0400)]
NFS: Restore missing hunk in NFS mount option parser

Automounter maps can contain mount options valid for other NFS
implementations but not for Linux.  The Linux automounter uses the
mount command's "-s" command line option ("s" for "sloppy") so that
mount requests containing such options are not rejected.

Commit f45663ce5fb30f76a3414ab3ac69f4dd320e760a attempted to address a
known regression with text-based NFS mount option parsing.  Unrecognized
mount options would cause mount requests to fail, even if the "-s"
option was used on the mount command line.

Unfortunately, this commit was not complete as submitted.  It adds a
new mount option, "sloppy".  But it is missing a hunk, so it now allows
NFS mounts with unrecognized mount options, even if the "sloppy" option
is not present.  This could be a problem if a required critical mount
option such as "sync" is misspelled, for example, and is considered a
regression from 2.6.26.

This patch restores the missing hunk.  Now, the default behavior of
text-based NFS mount options is as before: any unrecognized mount option
will cause the mount to fail.

Please include this in 2.6.27-rc.

Thanks to Neil Brown for reporting this.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agobridge: don't allow setting hello time to zero
Stephen Hemminger [Mon, 8 Sep 2008 20:44:40 +0000 (13:44 -0700)]
bridge: don't allow setting hello time to zero

Dushan Tcholich reports that on his system ksoftirqd can consume
between %6 to %10 of cpu time, and cause ~200 context switches per
second.

He then correlated this with a report by bdupree@techfinesse.com:

http://marc.info/?l=linux-kernel&m=119613299024398&w=2

and the culprit cause seems to be starting the bridge interface.
In particular, when starting the bridge interface, his scripts
are specifying a hello timer interval of "0".

The bridge hello time can't be safely set to values less than 1
second, otherwise it is possible to end up with a runaway timer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonetns : fix kernel panic in timewait socket destruction
Daniel Lezcano [Mon, 8 Sep 2008 20:17:27 +0000 (13:17 -0700)]
netns : fix kernel panic in timewait socket destruction

How to reproduce ?
 - create a network namespace
 - use tcp protocol and get timewait socket
 - exit the network namespace
 - after a moment (when the timewait socket is destroyed), the kernel
   panics.

# BUG: unable to handle kernel NULL pointer dereference at
0000000000000007
IP: [<ffffffff821e394d>] inet_twdr_do_twkill_work+0x6e/0xb8
PGD 119985067 PUD 11c5c0067 PMD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in: ipv6 button battery ac loop dm_mod tg3 libphy ext3 jbd
edd fan thermal processor thermal_sys sg sata_svw libata dock serverworks
sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Pid: 0, comm: swapper Not tainted 2.6.27-rc2 #3
RIP: 0010:[<ffffffff821e394d>] [<ffffffff821e394d>]
inet_twdr_do_twkill_work+0x6e/0xb8
RSP: 0018:ffff88011ff7fed0 EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffffffff82339420 RCX: ffff88011ff7ff30
RDX: 0000000000000001 RSI: ffff88011a4d03c0 RDI: ffff88011ac2fc00
RBP: ffffffff823392e0 R08: 0000000000000000 R09: ffff88002802a200
R10: ffff8800a5c4b000 R11: ffffffff823e4080 R12: ffff88011ac2fc00
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
FS: 0000000041cbd940(0000) GS:ffff8800bff839c0(0000)
knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000007 CR3: 00000000bd87c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff8800bff9e000, task
ffff88011ff76690)
Stack: ffffffff823392e0 0000000000000100 ffffffff821e3a3a
0000000000000008
0000000000000000 ffffffff821e3a61 ffff8800bff7c000 ffffffff8203c7e7
ffff88011ff7ff10 ffff88011ff7ff10 0000000000000021 ffffffff82351108
Call Trace:
<IRQ> [<ffffffff821e3a3a>] ? inet_twdr_hangman+0x0/0x9e
[<ffffffff821e3a61>] ? inet_twdr_hangman+0x27/0x9e
[<ffffffff8203c7e7>] ? run_timer_softirq+0x12c/0x193
[<ffffffff820390d1>] ? __do_softirq+0x5e/0xcd
[<ffffffff8200d08c>] ? call_softirq+0x1c/0x28
[<ffffffff8200e611>] ? do_softirq+0x2c/0x68
[<ffffffff8201a055>] ? smp_apic_timer_interrupt+0x8e/0xa9
[<ffffffff8200cad6>] ? apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff82011f4c>] ? default_idle+0x27/0x3b
[<ffffffff8200abbd>] ? cpu_idle+0x5f/0x7d

Code: e8 01 00 00 4c 89 e7 41 ff c5 e8 8d fd ff ff 49 8b 44 24 38 4c 89 e7
65 8b 14 25 24 00 00 00 89 d2 48 8b 80 e8 00 00 00 48 f7 d0 <48> 8b 04 d0
48 ff 40 58 e8 fc fc ff ff 48 89 df e8 c0 5f 04 00
RIP [<ffffffff821e394d>] inet_twdr_do_twkill_work+0x6e/0xb8
RSP <ffff88011ff7fed0>
CR2: 0000000000000007

This patch provides a function to purge all timewait sockets related
to a network namespace. The timewait sockets life cycle is not tied with
the network namespace, that means the timewait sockets stay alive while
the network namespace dies. The timewait sockets are for avoiding to
receive a duplicate packet from the network, if the network namespace is
freed, the network stack is removed, so no chance to receive any packets
from the outside world. Furthermore, having a pending destruction timer
on these sockets with a network namespace freed is not safe and will lead
to an oops if the timer callback which try to access data belonging to
the namespace like for example in:
inet_twdr_do_twkill_work
-> NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITED);

Purging the timewait sockets at the network namespace destruction will:
 1) speed up memory freeing for the namespace
 2) fix kernel panic on asynchronous timewait destruction

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoiwlwifi: enable packet injection for iwlagn
Stefanik Gábor [Wed, 3 Sep 2008 03:26:59 +0000 (11:26 +0800)]
iwlwifi: enable packet injection for iwlagn

Handle station IDs of transmitted packets when in monitor mode, and
remove the various anti-injection checks from the iwl4965 driver.
This makes injection work on iwl4965 and iwl5000. Tested on both cards.

Note: To inject management frames with encryption, HW crypto support
must be disabled using the "swcrypto=1" modparam (or "swcrypto50=1"
for iwl5000). Otherwise most management frames won't be transmitted.

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3945: enable active scanning on active channels
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:58 +0000 (11:26 +0800)]
iwl3945: enable active scanning on active channels

This patch enables active scanning on active channels.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: remove bad language from the comments
Tomas Winkler [Wed, 3 Sep 2008 03:26:55 +0000 (11:26 +0800)]
iwlwifi: remove bad language from the comments

This patch removes bad language in the comments in iwl-agn-rs.c.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: take a fresh set of supported rates at each cycle
Emmanuel Grumbach [Wed, 3 Sep 2008 03:26:54 +0000 (11:26 +0800)]
iwlwifi: take a fresh set of supported rates at each cycle

This patch fixes regression in iwlwifi IBSS rate scaling caused by the
patch named "mac80211: eliminate IBSS warning in rate_lowest_index()"
by Vladimir Koutny <vlado@work.ksp.sk>.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: fix host command header according the HW spec
Tomas Winkler [Wed, 3 Sep 2008 03:26:52 +0000 (11:26 +0800)]
iwlwifi: fix host command header according the HW spec

This patch aligns definition of host command with the spec. The
inaccuracies weren't critical though.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: allow association on radar channel in power save
Emmanuel Grumbach [Wed, 3 Sep 2008 03:26:50 +0000 (11:26 +0800)]
iwlwifi: allow association on radar channel in power save

This patch disables power save upon association and enables it back
after association. This allows to associate to AP on a radar channel
if power save is enabled.

Radar and passive channels are not allowed for TX (required for association)
unless RX is received but PS may close the radio and no RX will be received
effectively failing association.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: cleanup PCI register handling
Tomas Winkler [Wed, 3 Sep 2008 03:26:49 +0000 (11:26 +0800)]
iwlwifi: cleanup PCI register handling

This patch cleans up pci registers handling.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: fix strict_strtoul error checking
Emmanuel Grumbach [Wed, 3 Sep 2008 03:26:39 +0000 (11:26 +0800)]
iwlwifi: fix strict_strtoul error checking

This patch fixes handling of strcit_strtoul return value
"0 == sucess".

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: generic init calibrations framework
Tomas Winkler [Wed, 3 Sep 2008 03:26:37 +0000 (11:26 +0800)]
iwlwifi: generic init calibrations framework

This patch allows variable number of init calibrations and allows
addition new HW.

This patch also fixes critical bug. Only last calibration result
was applied. On reception of one calibration result all the calibration
was freed.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: remove rfkill warning from iwl-io
Tomas Winkler [Wed, 3 Sep 2008 03:26:35 +0000 (11:26 +0800)]
iwlwifi: remove rfkill warning from iwl-io

The patch removes the warning since registers might be accessed also
during rfkill.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: replace readl and writel with io/read/write/32
Tomas Winkler [Wed, 3 Sep 2008 03:26:34 +0000 (11:26 +0800)]
iwlwifi: replace readl and writel with io/read/write/32

This patch replaces readl and writel with more cross platform ioread32
and iowrite32.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: use strict_strtoul instead of simple_strtoul
Tomas Winkler [Wed, 3 Sep 2008 03:26:32 +0000 (11:26 +0800)]
iwlwifi: use strict_strtoul instead of simple_strtoul

This patch makes use of strict_srtoul in sysfs code.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3945: avoid redundant iwl3945_get_active_dwell_time
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:31 +0000 (11:26 +0800)]
iwl3945: avoid redundant iwl3945_get_active_dwell_time

iwl3945_get_active_dwell_time is called twice within the same context.
The patch removes one instance.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3945: removed bg_post_associate work
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:30 +0000 (11:26 +0800)]
iwl3945: removed bg_post_associate work

This patch removes bg_post_associate work. A direct call
iwl3945_post_associate is made to avoid the waiting by
userspace programs.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3945: replace association and beacon hooks with bss_info_changed cb
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:28 +0000 (11:26 +0800)]
iwl3945: replace association and beacon hooks with bss_info_changed cb

Let mac80211 and bss_info_changed callback handle the association and
beacon changes.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3945: fix unbalanced mutex
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:27 +0000 (11:26 +0800)]
iwl3945: fix unbalanced mutex

The patch removes unlocking of mutex from post_associate.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: align set channel with mac80211
Tomas Winkler [Wed, 3 Sep 2008 03:26:26 +0000 (11:26 +0800)]
iwlwifi: align set channel with mac80211

This patch makes use of mac80211 defaults for channel and band.
Older code that uses G band channel 6 was removed. This patch also
changes iwl_set_rxon_channel signature.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: allow consecutive scans in unassociated state
Ron Rindjunsky [Wed, 3 Sep 2008 03:26:25 +0000 (11:26 +0800)]
iwlwifi: allow consecutive scans in unassociated state

This patch allows consecutive scans requests when driver is in
unassociated state.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Esti Kummer <ester.kummer@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: remove obsolete 4965 forward declarations
Ron Rindjunsky [Wed, 3 Sep 2008 03:26:24 +0000 (11:26 +0800)]
iwlwifi: remove obsolete 4965 forward declarations

This patch removes unused forward declarations functions.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: clean up hw scan handler
Tomas Winkler [Wed, 3 Sep 2008 03:26:23 +0000 (11:26 +0800)]
iwlwifi: clean up hw scan handler

This patch cleans up iwl_mac_hw_scan handler.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi : Added bss_info_changed callback to 3945
Abhijeet Kolekar [Wed, 3 Sep 2008 03:26:21 +0000 (11:26 +0800)]
iwlwifi : Added bss_info_changed callback to 3945

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>