Al Viro [Sat, 29 Oct 2005 05:36:27 +0000 (06:36 +0100)]
[PATCH] s2io iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Tobias Klauser [Sat, 29 Oct 2005 13:09:26 +0000 (15:09 +0200)]
[PATCH] drivers/net/tg3: Use the DMA_{32,64}BIT_MASK constants
This one from my DMA_{32,64}BIT_MASK series did not seem to make it
through to upstream.
Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()
This patch includes dma-mapping.h explicitly because it caused errors
on some architectures otherwise.
See http://marc.theaimsgroup.com/?t=
108001993000001&r=1&w=2 for details
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Ashutosh Naik [Fri, 28 Oct 2005 22:14:53 +0000 (15:14 -0700)]
[PATCH] e1000: Fixes e1000_suspend warning when CONFIG_PM is not enabled
drivers/net/e1000/e1000_main.c:3645: warning: `e1000_suspend' defined
but not used
Signed-off-by: Ashutosh Naik <ashutosh_naik@adaptec.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Alan Cox [Fri, 28 Oct 2005 22:14:52 +0000 (15:14 -0700)]
[PATCH] Better fixup for the orinoco driver
The latest kernel added a pretty ugly fix for the orinoco etherleak bug
which contains bogus skb->len checks already done by the caller and causes
copies of all odd sized frames (which are quite common)
While the skb->len check should be ripped out the other fix is harder to do
properly so I'm proposing for this the -mm tree only until next 2.6.x so
that it gets tested.
Instead of copying buffers around blindly this code implements a padding
aware version of the hermes buffer writing function which does padding as
the buffer is loaded and thus more cleanly and without bogus 1.5K copies.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Andrew Morton [Fri, 28 Oct 2005 22:14:51 +0000 (15:14 -0700)]
[PATCH] revert "orinoco: Information leakage due to incorrect padding"
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Ravikiran G Thirumalai [Fri, 28 Oct 2005 22:14:49 +0000 (15:14 -0700)]
[PATCH] e1000: use vmalloc_node()
Allocate node local tx and rx descriptors for the e1000 driver
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Machek [Fri, 28 Oct 2005 22:14:47 +0000 (15:14 -0700)]
[PATCH] b44: fix suspend/resume
Fix suspend/resume on b44 by freeing/reacquiring irq. Otherwise it hangs
on resume.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Florin Malita [Fri, 28 Oct 2005 22:14:46 +0000 (15:14 -0700)]
[PATCH] eepro.c: module_param_array cleanup
num_params is unused (and unusable in this form).
Signed-off-by: Florin Malita <fmalita@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Martin J. Bligh [Fri, 28 Oct 2005 22:14:44 +0000 (15:14 -0700)]
[PATCH] e1000: remove warning about e1000_suspend
e1000_suspend is only used under #ifdef CONFIG_PM. Move the declaration of
it to be the same way, just like e1000_resume, otherwise gcc whines on
compile. I offer as evidence:
static struct pci_driver e1000_driver = {
.name = e1000_driver_name,
.id_table = e1000_pci_tbl,
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
/* Power Managment Hooks */
#ifdef CONFIG_PM
.suspend = e1000_suspend,
.resume = e1000_resume
#endif
};
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Jeff Garzik [Fri, 28 Oct 2005 22:48:57 +0000 (18:48 -0400)]
Merge branch 'master'
Linus Torvalds [Fri, 28 Oct 2005 21:14:57 +0000 (14:14 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6
Greg Kroah-Hartman [Fri, 21 Oct 2005 22:23:27 +0000 (00:23 +0200)]
[PATCH] I2C: add i2c module alias for i2c drivers to use
This is the start of adding hotplug-like support for i2c devices.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 21 Oct 2005 22:23:27 +0000 (00:23 +0200)]
[PATCH] I2C: remove devfs support from i2c-dev driver
as devfs is gone, this isn't needed anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 20:21:24 +0000 (22:21 +0200)]
[PATCH] hwmon: smsc47m1 documentation update
The SMSC LPC47M997 Super-I/O chip seems to be compatible with the
LPC47M192, so it is supported by the smsc47m1 driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 20:20:21 +0000 (22:20 +0200)]
[PATCH] hwmon: lm90 documentation update
Update the I2C addresses for the ADM1032 and ADT7461 chips.
Also update the links to the Analog Devices web site.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:39:40 +0000 (21:39 +0200)]
[PATCH] hwmon: Add PEC support to the lm90 driver
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.
As enabling PEC causes a significant performance drop, it can be
disabled through a sysfs file (unsurprisingly named "pec").
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:37:52 +0000 (21:37 +0200)]
[PATCH] hwmon: Separate the lm90 register read function
Preparatory patch to add PEC support to the lm90 driver. We need a
centralized function to read register values, where the PEC code will
be later inserted. A positive side effect is that read errors are now
handled properly.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:34:42 +0000 (21:34 +0200)]
[PATCH] i2c: i2c-i801 PEC code cleanups
The tests leading to the use of hardware PEC in the i2c-i801 driver
can be simplified.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:31:15 +0000 (21:31 +0200)]
[PATCH] i2c: SMBus PEC support rewrite, 3 of 3
The new SMBus PEC implementation doesn't support PEC emulation on
non-PEC non-I2C SMBus masters, so we can drop all related code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:28:55 +0000 (21:28 +0200)]
[PATCH] i2c: SMBus PEC support rewrite, 2 of 3
This is my rewrite of the SMBus PEC support. The original
implementation was known to have bugs (credits go to Hideki Iwamoto
for reporting many of them recently), and was incomplete due to a
conceptual limitation.
The rewrite affects only software PEC. Hardware PEC needs very little
code and is mostly untouched.
Technically, both implementations differ in that the original one
was emulating PEC in software by modifying the contents of an
i2c_smbus_data union (changing the transaction to a different type),
while the new one works one level lower, on i2c_msg structures (working
on message contents). Due to the definition of the i2c_smbus_data union,
not all SMBus transactions could be handled (at least not without
changing the definition of this union, which would break user-space
compatibility), and those which could had to be implemented
individually. At the opposite, adding PEC to an i2c_msg structure
can be done on any SMBus transaction with common code.
Advantages of the new implementation:
* It's about twice as small (from ~136 lines before to ~70 now, only
counting i2c-core, including blank and comment lines). The memory
used by i2c-core is down by ~640 bytes (~3.5%).
* Easier to validate, less tricky code. The code being common to all
transactions by design, the risk that a bug can stay uncovered is
lower.
* All SMBus transactions have PEC support in I2C emulation mode
(providing the non-PEC transaction is also implemented). Transactions
which have no emulation code right now will get PEC support for free
when they finally get implemented.
* Allows for code simplifications in header files and bus drivers
(patch follows).
Drawbacks (I guess there had to be at least one):
* PEC emulation for non-PEC capable non-I2C SMBus masters was dropped.
It was based on SMBus tricks and doesn't quite fit in the new design.
I don't think it's really a problem, as the benefit was certainly
not worth the additional complexity, but it's only fair that I at
least mention it.
Lastly, let's note that the new implementation does slightly affect
compatibility (both in kernel and user-space), but doesn't actually
break it. Some defines will be dropped, but the code can always be
changed in a way that will work with both the old and the new
implementations. It shouldn't be a problem as there doesn't seem to be
many users of SMBus PEC to date anyway.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:25:04 +0000 (21:25 +0200)]
[PATCH] i2c: SMBus PEC support rewrite, 1 of 3
Discard I2C_FUNC_SMBUS_*_PEC defines. i2c clients are not supposed to
check for PEC support of i2c bus drivers on individual SMBus
transactions, and i2c bus drivers are not supposed to advertise them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:21:50 +0000 (21:21 +0200)]
[PATCH] i2c: i2c-i810 documentation update
Update the documented list of devices supported by the i2c-i810
driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:20:17 +0000 (21:20 +0200)]
[PATCH] i2c: Drop unused parport i2c IDs
Drop unused i2c-over-parallel-port i2c IDs:
* I2C_HW_B_LPC was never actually used as far as I could search.
* I2C_HW_B_ELV and I2C_HW_B_VELLE are no more used since the
introduction of the unified i2c-parport driver in Linux 2.6.2.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 26 Oct 2005 19:14:16 +0000 (21:14 +0200)]
[PATCH] i2c: ID redefinition cleanups
Fix several redefinitions of i2c IDs. i2c IDs must not be defined
outside of i2c-id.h.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Henk Vergonet <henk@god.dyndns.org>
Acked-by: Mark McClelland <mark@alpha.dyndns.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Wed, 26 Oct 2005 19:09:41 +0000 (21:09 +0200)]
[PATCH] i2c: Static function fixes, 4 of 4
Fix functions declared static and then implemented
without the static in drivers/i2c/chips.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Wed, 26 Oct 2005 19:07:25 +0000 (21:07 +0200)]
[PATCH] hwmon: Static function fixes, 3 of 4
Fixup functions that have been declared static
and then actually defined without the static on.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Wed, 26 Oct 2005 19:05:46 +0000 (21:05 +0200)]
[PATCH] hwmon: Static function fixes, 2 of 4
lm78.c and lm85.c have a number of items declared static
then implemented without the static on them. The following
patch fixes these sparse errors.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Wed, 26 Oct 2005 19:04:12 +0000 (21:04 +0200)]
[PATCH] i2c: Static function fixes, 1 of 4
eeprom_detect is first declared static and then when
the function is actually implemented, there is no static.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 17 Oct 2005 21:16:25 +0000 (23:16 +0200)]
[PATCH] i2c: Documentation update
Update the i2c documentation: kzalloc should be used instead of
kmalloc.
I also fixed a couple other things nearby in writing-clients, as several
past changes had never been reported there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 17 Oct 2005 21:14:31 +0000 (23:14 +0200)]
[PATCH] i2c: kzalloc cleanups, 2 of 2
Use kzalloc instead of kmalloc in the S4882 SMBus multiplexing driver.
I guess it's safer that way.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 17 Oct 2005 21:12:36 +0000 (23:12 +0200)]
[PATCH] i2c: kzalloc cleanups, 1 of 2
Drop useless casts on kzalloc returned values, as suggested by
Jiri Slaby.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Deepak Saxena [Mon, 17 Oct 2005 21:09:43 +0000 (23:09 +0200)]
[PATCH] i2c: kzalloc conversion, other drivers
Use kzalloc instead of kmalloc+memset in all remaining i2c bus and
chip drivers.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Deepak Saxena [Mon, 17 Oct 2005 21:08:32 +0000 (23:08 +0200)]
[PATCH] hwmon: kzalloc conversion
Use kzalloc instead of kmalloc+memset in all hardware monitoring
drivers.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Deepak Saxena [Mon, 17 Oct 2005 21:07:05 +0000 (23:07 +0200)]
[PATCH] i2c: kzalloc conversion, ixp bus drivers
Use kzalloc instead of kmalloc+memzero in the ixp2000 and ixp4xx
I2C bus drivers.
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alessandro Zummo [Mon, 17 Oct 2005 21:04:42 +0000 (23:04 +0200)]
[PATCH] i2c: New Xicor X1205 RTC driver
New driver for the Xicor X1205 RTC chip.
Signed-off-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 17 Oct 2005 21:02:42 +0000 (23:02 +0200)]
[PATCH] hwmon: Missing class check in two hwmon drivers
The atxp1 and ds1621 drivers should make sure they do not probe
non-hwmon i2c adapters.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark M. Hoffman [Mon, 17 Oct 2005 21:01:45 +0000 (23:01 +0200)]
[PATCH] hwmon: New device ID for the smsc47b397 driver
This patch adds a new ID to the SMSC LPC47B397-NC hardware
monitoring driver - for a chip that is claimed to be 100%
compatible otherwise.
Signed-off-by: Bryan Young (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Laurent Riffard [Mon, 17 Oct 2005 20:58:35 +0000 (22:58 +0200)]
[PATCH] Owner field additions to many i2c drivers, 5 of 5
In function i2c_isa_add_driver, copied driver should inherit the owner
field as well as the name field.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Laurent Riffard [Mon, 17 Oct 2005 20:54:45 +0000 (22:54 +0200)]
[PATCH] Owner field additions to many i2c drivers, 4 of 5
This patch updates the .owner field for the i2c core struct xxxx_driver
variables.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Laurent Riffard [Mon, 17 Oct 2005 20:53:52 +0000 (22:53 +0200)]
[PATCH] Owner field additions to many i2c drivers, 3 of 5
This patch updates the .owner field for various struct xxxx_driver
variables which are available on PPC_MAC arch.
This one was _not_ even compile-tested...
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Laurent Riffard [Mon, 17 Oct 2005 20:51:37 +0000 (22:51 +0200)]
[PATCH] Owner field additions to many i2c drivers, 2 of 5
This patch updates the .owner field for various struct xxxx_driver variables,
other than pci_driver.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Laurent Riffard [Mon, 17 Oct 2005 20:47:48 +0000 (22:47 +0200)]
[PATCH] Owner field additions to many i2c drivers, 1 of 5
This patch updates .owner field for various struct pci_driver variables.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stig Telfer [Fri, 7 Oct 2005 22:23:27 +0000 (00:23 +0200)]
[PATCH] i2c: Big i2c-elektor cleanup
Cleanups to the i2c-elektor driver:
* Set the i2c_adapter name field to "i2c-elektor" and use this string
in all resource requests and printks.
* Change space-padding for tab indentation, kill trailing white space,
remove space before comma.
* Use dev_info, pr_info and pr_debug instead of printk.
* Lines chopped to 80 columns.
Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stig Telfer [Fri, 7 Oct 2005 22:21:48 +0000 (00:21 +0200)]
[PATCH] i2c: Fix i2c-elektor on Alpha
This patch updates the i2c-elektor driver, enabling it to compile
cleanly, load and run. The key change is that it uses the new
__iomem/iowrite8/ioread8 functions to abstract the direct or
memory-mapped variants of register access. Also, the original driver
would crash on module load on the Alpha because the PCI memory region
was not remapped into kernel memory.
I have managed the following testing:
* compiled and tested it on my Alpha UP2000+ system.
* compiles cleanly for x86 but I don't have the hardware to test.
Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:19:52 +0000 (00:19 +0200)]
[PATCH] i2c: Drop meaningless use of I2C_DF_NOTIFY in i2c_client structures
I2C_DF_NOTIFY is an i2c_driver flag, using it as an i2c_client flag
doesn't make any sense.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:17:35 +0000 (00:17 +0200)]
[PATCH] i2c: Rename i2c-parport variable to avoid confusion
It's a bit confusing to name a variable the same as an unrelated
structure. The compiler doesn't complain, but it certainly makes the
code harder to understand, and could confuse grep and LXR among
others.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:15:59 +0000 (00:15 +0200)]
[PATCH] i2c: Drop I2C_SMBUS_I2C_BLOCK_MAX
Drop I2C_SMBUS_I2C_BLOCK_MAX, use I2C_SMBUS_BLOCK_MAX instead.
I2C_SMBUS_I2C_BLOCK_MAX has always been defined to the same value as
I2C_SMBUS_BLOCK_MAX, and this will never change: setting it to a lower
value would make no sense, setting it to a higher value would break
i2c_smbus_data compatibility. There is no point in changing
i2c_smbus_data to support larger block transactions in SMBus mode, as
no SMBus hardware supports more than 32 byte blocks. Thus, for larger
transactions, direct I2C transfers are the way to go.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:14:17 +0000 (00:14 +0200)]
[PATCH] i2c: Drop unused per-i2c-algorithm adapter max
There are no more per-i2c-algorithm adapter max. Last time there were
was in July 1999.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:12:01 +0000 (00:12 +0200)]
[PATCH] hwmon: Drop useless w83627hf initialization step
Drop a useless initialization step in the w83627hf driver. The comment
says that the W83627HF PWM2 can be disabled, but it can't. I suppose
this is a leftover from the w83781d driver (from which the w83627hf
driver is derived), as for example the W83782D had the ability to
disable PWM2.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:10:00 +0000 (00:10 +0200)]
[PATCH] hwmon: Drop legacy ISA address support from it87
Drop legacy ISA address support from the it87 driver. All supported
chips are Super-I/O chips, so the device ISA address can be safely read
from Super-I/O space rather than blindly assumed.
Two nearby inaccurate documentation statements have been fixed as well:
* The IT8705F doesn't have an SMBus interface.
* The SiS950 doesn't have a distinct prefix.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:06:09 +0000 (00:06 +0200)]
[PATCH] i2c: Drop out-of-date, colliding ioctl definitions
Delete 2 out-of-date, colliding ioctl defines. I2C_UDELAY and
I2C_MDELAY are supposed to be used by i2c-algo-bit, but actually
aren't (and I suspect never were). Moreover, their values are the same
as I2C_FUNCS and I2C_SLAVE_FORCE, respectively, which *are* widely
used.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:04:13 +0000 (00:04 +0200)]
[PATCH] i2c: Fix misplaced i2c.h comment
Fix a misplaced comment in i2c.h. Spotted by Hideki Iwamoto.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 22:00:31 +0000 (00:00 +0200)]
[PATCH] i2c: Documentation fixes
i2c documentation fixes.
>From Hideki Iwamoto:
* i2c_smbus_read_i2c_block_data is not deleted in 2.6.10. It still
exists.
* The name which can be set to i2c_driver is up to 31 characters.
>From Jean Delvare:
* Reword the paragraph about i2c_driver.name, to reflect the "new"
naming policy.
* Delete the out-of-date note about now gone inc_use and dec_use
fields.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 21:56:46 +0000 (23:56 +0200)]
[PATCH] i2c: Cleanup i2c-i801 ifdefs
No more need to check for PEC support being available now that both
the i2c-core and the i2c-i801 drivers are part of the Linux kernel
source tree. It's just there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Petr Vandrovec [Fri, 7 Oct 2005 21:11:03 +0000 (23:11 +0200)]
[PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014)
This patch changes w83627hf and w83627ehf drivers to reserve only ports
0x295-0x296, instead of full 0x290-0x297 range. While some other
sensors chips respond to all addresses in 0x290-0x297 range, Winbond
chips respond to 0x295-0x296 only (this behavior is implied by
documentation, and matches behavior observed on real systems). This is
not problem alone, as no BIOS was found to put something at these unused
addresses, and sensors chip itself provides nothing there as well.
But in addition to only respond to these two addresses, also BIOS
vendors report in their ACPI-PnP structures that there is some resource
at I/O address 0x295 of length 2. And when later this hwmon driver
attempts to request region with base 0x290/length 8, it fails as one
request_region cannot span more than one device.
Due to this we have to ask only for region this hardware really
occupies, otherwise driver cannot be loaded on systems with ACPI-PnP
enabled.
Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 21:09:04 +0000 (23:09 +0200)]
[PATCH] i2c: Drop useless CVS revision IDs
CVS revision IDs are totally useless and irrelevant by now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 21:06:27 +0000 (23:06 +0200)]
[PATCH] i2c: Cleanup i2c-dev ioctl debug message
Cleanup the ioctl debug message in i2c-dev. In particular, the minor
number is redundant now that the minor number and the adapter number
are kept in sync.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 7 Oct 2005 21:04:48 +0000 (23:04 +0200)]
[PATCH] i2c: Add missing i2c-ixp2000/4xx adapter name
The ixp4xx and ixp2000 i2c bus drivers omit to fill the required
i2c_adapter name field. Copy the device driver name field there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg KH [Thu, 22 Sep 2005 20:23:32 +0000 (22:23 +0200)]
[PATCH] i2c-viapro: Cleanup ifdef usage
It's not nice to put #ifdef in the middle of functions.
CC: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-viapro.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 20:23:32 +0000 (22:23 +0200)]
[PATCH] i2c-viapro: Improve register dump
Improve the register dump used to debug the i2c-viapro driver. The
original dump was missing the HSTSTS register and the block data
buffer.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 20:15:53 +0000 (22:15 +0200)]
[PATCH] i2c-viapro: Refactor control outb
By slightly shifting the interface between vt596_access and
vt596_transaction, we can save two I/O accesses per SMBus transaction.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-viapro.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 20:09:07 +0000 (22:09 +0200)]
[PATCH] i2c-viapro: Update supported devices list
Make it clearer which chips are supported by the i2c-viapro driver,
and which support I2C block transactions.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/busses/i2c-viapro | 12 ++++++------
drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++---------
2 files changed, 19 insertions(+), 15 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 20:01:07 +0000 (22:01 +0200)]
[PATCH] i2c-viapro: Code cleanups
Cleanups to the i2c-viapro driver:
* Kill unused defines.
* Kill interrupt-related code, as the driver doesn't use interrupts.
* Fix broken comments (some copied from i2c-piix4.)
* Centralize the unsupported command error case in vt596_access.
That way we'll catch all unsupported commands, not only
I2C_SMBUS_PROC_CALL.
* Refactor some code.
* Convert some dev_dbg into dev_err. Errors better be reported even in
non-debug mode.
* Do not verify that the final reset succeeded. It'll be checked at
the beginning of the next transaction anyway.
* Use the driver name to reserve the I/O region.
* Do not print the contents of the SMBREV register, it reads 0 on all
chips I've seen so far.
* Some other minor fixes all over the place.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++++---------------------------
1 file changed, 41 insertions(+), 81 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 19:58:41 +0000 (21:58 +0200)]
[PATCH] i2c-viapro: Implement I2C Block transactions
Implement the I2C block transactions on VIA chips which support them:
VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM
accesses by a factor 10 or so.
I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya
and Andreas Henriksson for their help in testing this new feature.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/busses/i2c-viapro | 7 +++++-
drivers/i2c/busses/i2c-viapro.c | 39 +++++++++++++++++++++++++++++++++---
2 files changed, 42 insertions(+), 4 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 19:50:47 +0000 (21:50 +0200)]
[PATCH] i2c-viapro: Coding style fixes
Before I go on cleaning up and improving the i2c-viapro driver, let's
fix all the coding style issues: mostly trailing white space, and
spaces used where tabs should be.
Signed-off-by: Jean Delvare <khali@linux-fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/busses/i2c-viapro | 12 ++---
drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------
2 files changed, 43 insertions(+), 45 deletions(-)
Jean Delvare [Thu, 22 Sep 2005 19:47:58 +0000 (21:47 +0200)]
[PATCH] i2c-viapro: New maintainer
I am taking over the maintenance of the i2c-viapro SMBus driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
Hideki Iwamoto [Sun, 25 Sep 2005 15:01:11 +0000 (17:01 +0200)]
[PATCH] i2c: Several PEC-related fixes in software SMBus emulation
Fix several errors in I2C SMBus emulation when PEC is used:
* Weird logic error in SMBus Write Word transactions.
* Wrong buffer size, affecting SMBus Block Write transactions.
* Potential buffer overrun in SMBus Block Write transactions.
From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/i2c-core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:58:22 +0000 (16:58 +0200)]
[PATCH] i2c: Minor i2c-amd8111 cleanup
I noticed a useless instruction in the i2c-amd8111 driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
CC: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-amd8111.c | 1 -
1 file changed, 1 deletion(-)
Hideki Iwamoto [Sun, 25 Sep 2005 14:56:43 +0000 (16:56 +0200)]
[PATCH] i2c: Fix union i2c_smbus_data definition
The i2c_smbus_data union block member has a comment stating that an
extra byte is required for SMBus Block Process Call transactions. This
has been true for three weeks around June 2002, but no more since, so
it is about time that we drop this comment and fix the definition.
From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
include/linux/i2c.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
Hideki Iwamoto [Sun, 25 Sep 2005 14:53:04 +0000 (16:53 +0200)]
[PATCH] i2c: Fix I2C_FUNC_PROTOCOL_MANGLING documentation
Fix the description of I2C_FUNC_PROTOCOL_MANGLING.
From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/functionality | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:50:06 +0000 (16:50 +0200)]
[PATCH] i2c: Adjust i2c_probe() for busses without SMBUS_QUICK
Move the check for SMBUS_QUICK in i2c_probe() after the forced
addresses have been handled. This makes it possible for a driver to
leave the probed address lists empty, only providing forced addresses,
and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/i2c-core.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:45:03 +0000 (16:45 +0200)]
[PATCH] hwmon: Minor w83l785ts optimization
Using s8 instead of u8 to store temperature register values saves a
few instructions on sysfs file read. The very same was done for
several other drivers a while ago (lm63, lm83, lm90...)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/hwmon/w83l785ts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:41:18 +0000 (16:41 +0200)]
[PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacks
Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a
small driver so the benefit is thin, but still worth it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:37:04 +0000 (16:37 +0200)]
[PATCH] i2c: Reuse name strings in i2c bus drivers
Clean up name string usage in 12 i2c bus drivers:
* Use the i2c_adapter name for requesting the I/O region rather than
redefining a new string.
* Do not initialize the i2c_adapter name to "unset".
This should save a few data bytes here and there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-ali1535.c | 6 +++---
drivers/i2c/busses/i2c-ali1563.c | 6 ++++--
drivers/i2c/busses/i2c-ali15x3.c | 5 +++--
drivers/i2c/busses/i2c-amd756.c | 5 ++---
drivers/i2c/busses/i2c-amd8111.c | 4 +++-
drivers/i2c/busses/i2c-i801.c | 4 ++--
drivers/i2c/busses/i2c-nforce2.c | 4 ++--
drivers/i2c/busses/i2c-piix4.c | 4 ++--
drivers/i2c/busses/i2c-sis5595.c | 5 +++--
drivers/i2c/busses/i2c-sis630.c | 6 ++++--
drivers/i2c/busses/i2c-sis96x.c | 5 +++--
drivers/i2c/busses/i2c-via.c | 4 ++--
12 files changed, 33 insertions(+), 25 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:29:38 +0000 (16:29 +0200)]
[PATCH] hwmon: Discard bogus comment about init setting limits
Discard a common out-of-date comment in 5 hardware monitoring drivers.
The hardware monitoring chip drivers are no more setting sensor limits
at initialization time, for quite some time already.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/hwmon/lm78.c | 1 -
drivers/hwmon/via686a.c | 1 -
drivers/hwmon/w83627hf.c | 1 -
drivers/hwmon/w83781d.c | 1 -
drivers/hwmon/w83792d.c | 1 -
5 files changed, 5 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:26:44 +0000 (16:26 +0200)]
[PATCH] hwmon: Discard explicit static initializations to 0
Kill explicit static initializations to 0 in 2 hwmon drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/hwmon/adm1021.c | 2 +-
drivers/hwmon/via686a.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:23:07 +0000 (16:23 +0200)]
[PATCH] i2c: Discard explicit static initializations to 0
Kill explicit static initializations to 0 in 10 i2c drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/algos/i2c-algo-pca.c | 2 +-
drivers/i2c/algos/i2c-algo-sibyte.c | 2 +-
drivers/i2c/busses/i2c-ali15x3.c | 4 ++--
drivers/i2c/busses/i2c-amd756.c | 2 +-
drivers/i2c/busses/i2c-iop3xx.c | 2 +-
drivers/i2c/busses/i2c-piix4.c | 8 ++++----
drivers/i2c/busses/i2c-sis5595.c | 4 ++--
drivers/i2c/busses/i2c-sis630.c | 2 +-
drivers/i2c/busses/i2c-sis96x.c | 2 +-
drivers/i2c/busses/i2c-via.c | 2 +-
10 files changed, 15 insertions(+), 15 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:18:49 +0000 (16:18 +0200)]
[PATCH] hwmon: Do not forcibly enable via686a by default
Do not enable the VIA VT82C686A/B integrated sensors by default, as
disabled sensors usually means that this feature is not used so the
values won't make any sense. This has been confusing many users in the
past:
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052
It is still possible to forcibly enable the sensors by using the
force_addr module parameter.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/hwmon/via686a | 17 +++++++++++++++--
drivers/hwmon/via686a.c | 18 +++++++++++-------
2 files changed, 26 insertions(+), 9 deletions(-)
Jean Delvare [Sun, 25 Sep 2005 14:14:18 +0000 (16:14 +0200)]
[PATCH] hwmon: adm9240 whitespace cleanups
This whitespace cleanup patch removes one trailing space and breaks
lines longer than 80 characters.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
Jean Delvare [Sat, 10 Sep 2005 21:00:46 +0000 (23:00 +0200)]
[PATCH] hwmon: via686a: save 0.5k by long v[256] -> s16 v[256]
We can save 0.5kB of data in the via686a driver.
From: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Fri, 16 Sep 2005 19:32:57 +0000 (05:32 +1000)]
[PATCH] hwmon: adm9240 driver update - dynamic sysfs
hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors
This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks,
reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1,
removing the old driver macro mess.
Run tested on Intel SE440BX-2 mobo.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Fri, 16 Sep 2005 19:32:55 +0000 (05:32 +1000)]
[PATCH] hwmon: adm9240 driver update - cleanups
hwmon: adm9240 update 1/2: cleanups:
o remove i2c read/write wrapper interface as it does nothing,
o change kmalloc + memset to kzalloc
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Thu, 27 Oct 2005 18:46:53 +0000 (14:46 -0400)]
[PATCH] Ensure that 'make distclean' does not delete files in '.git'
Currently, 'make distclean' causes stgit to barf since it may delete
files in .git/patches. We really shouldn't allow 'make distclean'
anywhere near .git...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Peter Osterlund [Fri, 28 Oct 2005 18:23:39 +0000 (20:23 +0200)]
[PATCH] Fix ext3 warning for unused var
Fix compile warning in ext3 quota code.
Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Panagiotis Issaris [Mon, 5 Sep 2005 02:14:10 +0000 (04:14 +0200)]
[PATCH] ipw2200: Missing kmalloc check
The ipw2200 driver code in current GIT contains a kmalloc() followed by
a memset() without handling a possible memory allocation failure.
Signed-off-by: Panagiotis Issaris <panagiotis.issaris@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Komuro [Fri, 28 Oct 2005 20:55:55 +0000 (16:55 -0400)]
[netdrvr] ne2k-pci based card does not support bus-mastering.
pci_set_master is unnecessary.
Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Linus Torvalds [Fri, 28 Oct 2005 20:55:08 +0000 (13:55 -0700)]
pcmcia: add socket register data to sysfs for yenta devices
It's simple, and it's a good debugging aid.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jesper Juhl [Fri, 28 Oct 2005 20:53:13 +0000 (16:53 -0400)]
drivers/net: Remove pointless checks for NULL prior to calling kfree()
Vasily Averin [Fri, 28 Oct 2005 20:46:35 +0000 (16:46 -0400)]
sis900: come alive after temporary memory shortage
1) Forgotten counter incrementation in sis900_rx() in case
it doesn't get memory for skb, that leads to whole interface failure.
Problem is accompanied with messages:
eth0: Memory squeeze,deferring packet.
eth0: NULL pointer encountered in Rx ring, skipping
2) If counter cur_rx overflows and there'll be temporary memory problems
buffer can't be recreated later, when memory IS available.
3) Limit the work in handler to prevent the endless packets processing
if new packets are generated faster then handled.
Signed-off-by: Konstantin Khorenko <khorenko@sw.ru>
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Jeff Garzik [Fri, 28 Oct 2005 20:43:40 +0000 (16:43 -0400)]
[git] change permissions on drivers/net/amd8111e.[ch] to 0644,
removing executable bits.
Eugene Surovegin [Fri, 14 Oct 2005 10:00:53 +0000 (03:00 -0700)]
[PATCH] Add MAINTAINER entry for the new PowerPC 4xx on-chip ethernet controller driver
Add MAINTAINER entry for the new PPC4xx EMAC driver
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Eugene Surovegin [Mon, 10 Oct 2005 23:58:14 +0000 (16:58 -0700)]
[PATCH] New PowerPC 4xx on-chip ethernet controller driver
This patch replaces current PowerPC 4xx EMAC driver with
new, re-written from the scratch version. This patch is quite big
(~234K) because there is virtualy 0% of common code between old and
new version.
New driver uses NAPI, it solves stability problems under heavy packet
load and low memory, corrects chip register access and fixes numerous
small bugs I don't even remember now.
This patch has been tested on all supported in 2.6 PPC 4xx boards.
It's been used in production for almost a year now on custom
4xx hardware. PPC32 specific parts are already upstream.
Patch was acked by the current EMAC driver maintainer (Matt Porter). I
will be maintaining this new version.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
--
Kconfig | 72
ibm_emac/Makefile | 13
ibm_emac/ibm_emac.h | 418 +++--
ibm_emac/ibm_emac_core.c | 3414 ++++++++++++++++++++++++----------------------
ibm_emac/ibm_emac_core.h | 313 ++--
ibm_emac/ibm_emac_debug.c | 377 ++---
ibm_emac/ibm_emac_debug.h | 63
ibm_emac/ibm_emac_mal.c | 674 +++++----
ibm_emac/ibm_emac_mal.h | 336 +++-
ibm_emac/ibm_emac_phy.c | 335 ++--
ibm_emac/ibm_emac_phy.h | 105 -
ibm_emac/ibm_emac_rgmii.c | 201 ++
ibm_emac/ibm_emac_rgmii.h | 68
ibm_emac/ibm_emac_tah.c | 111 +
ibm_emac/ibm_emac_tah.h | 96 -
ibm_emac/ibm_emac_zmii.c | 255 +++
ibm_emac/ibm_emac_zmii.h | 114 -
17 files changed, 4114 insertions(+), 2851 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Philippe De Muyter [Fri, 28 Oct 2005 10:23:47 +0000 (12:23 +0200)]
[PATCH] sundance: fix DFE-580TX Tx Underrun
Under heavy PCI bus load, ports of the DFE-580TX 4-ethernet port board stop
working, with currently no other cure than a powercycle. Here is a tested
fix. By the way, I also fixed some references and attribution.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Andrew Morton [Fri, 28 Oct 2005 20:38:02 +0000 (16:38 -0400)]
[netdrvr b44] include linux/dma-mapping.h to eliminate warning
Pantelis Antoniou [Fri, 28 Oct 2005 20:25:58 +0000 (16:25 -0400)]
Add fs_enet ethernet network driver, for several embedded platforms.
Alexey Dobriyan [Thu, 6 Oct 2005 22:05:23 +0000 (02:05 +0400)]
[PATCH] starfire: free_irq() on error path of netdev_open()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Deepak Saxena [Sun, 23 Oct 2005 20:41:35 +0000 (13:41 -0700)]
[PATCH] Fix CS89x0 KConfig for IXDP2X01
IXDP2x01 systems can be built without PCI network cards, so we should not
require NET_PCI to build CS89x0 on these systems.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Nicolas Pitre [Wed, 5 Oct 2005 15:10:24 +0000 (11:10 -0400)]
[PATCH] smc91x: shut down power after probing
If the interface is not used right away after being probed it wastes
power needlessly. Noted by Holger Schurig.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Aurelien Jarno [Wed, 5 Oct 2005 21:29:58 +0000 (23:29 +0200)]
[PATCH] sis190.c: fix multicast MAC filter
Here is a patch that changes the way the MAC filter is computed for the
multicast addresses. The computation is taken from the SiS GPL driver.
This patch is necessary to get IPv6 working.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Matthew Wilcox [Tue, 4 Oct 2005 17:25:17 +0000 (11:25 -0600)]
[PATCH] b44 reports wrong advertised flags
Looks like someone used the MII constants instead of the ethtool constants.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log