[HACK][9610] drivers: acpm: set NULL to acpm_mfd_node

Change-Id: I5cd662400604e46fd2868972634d47f639cc48ec
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] include: chip_id: add exynos9810 chip_id

Change-Id: I8206d813c467fb65f0bc90b53276ff5a74c49fb1
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] arm64: configs: Enable ACPM

Change-Id: Ib2504642fe9ec1dbe6f544beb7e2b27a506dc4ad
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] include: soc: modify exynos_ss for acpm

Change-Id: I6acd82ca5963b45e9bc349beb1455f0689616a86
Signed-off-by: Naeun Yoo <ne.yoo@samsung.com>

[9610] arm64: dtsi: add ACPM node

Change-Id: I85207444f120a04a9ceff37a39d866f60227d804
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] drivers: soc: add acpm driver to Kconfig, Makefile

Change-Id: I94895563f73b763c5df84534d00396c7f11c0161
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] drivers: soc: introduce ACPM driver

Change-Id: I74dca6a17cf3d2b1189371d9c9d8c5a52e9bd70b
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] arm64: dtsi: Corrected clock node.

Change-Id: Ie71e26cd57ffd25f2d6fe4ac0d4bbcf7da02391d
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enabled CONFIG_ECT.

Change-Id: I4f0115ed16c6d62e927a46444cca950dced3439d
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enabled CAL_IF configs.

Change-Id: I92fcc6dfb7d7e87749935d658b7908709aedaafd
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: dts: Added ECT node.

Change-Id: Idc3cdfe7da0df275466536ae73dd46dabfc81930
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: dtsi: Added exynos_pmu node.

Change-Id: I17044200a14ad413e45bfdf48675b8c749125bb9
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

soc: samsung: ect: modified the CLASS_ATTR macro in kernel4.14

Change-Id: Ia5edfef564b890b0ed777adf9d8a95fcf4fe1b7a
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] soc: samsung: ect: fixed prevent defects

CID201507, CID201485, CID201471, CID201258, CID201144, CID200802

Change-Id: I7eea257c11b9b90abcb3d985721a309db42d2c01
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] trace: ess: fixed the complie error by cmu and pmu

Change-Id: I0f7370a0b15d1d0bf36d17562d8f55dbb89e9f71
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] soc: samsung: Added initial exynos_pmu codes.

Change-Id: I018b1403724225c5da3b9cd6c46824e452b23aa1
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] soc: samsung: Added initial ect_parser codes.

Change-Id: Id10fb630aae22f9975ae3cd5f722d597c7b5dbf2
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] clk: samsung: Added initial clock codes.

Change-Id: If68f3fea942f5eb86d7043208c58a216ccdaf96e
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] soc: samsung: cal-if: Added initial CAL_IF codes.

Change-Id: Ibe84cbd4af5a2d7462db9ecffa2b85d6d0865441
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[HACK] disalbe chip-id driver function

Change-Id: I101b88152dd0c3ee0deb91abc4382e5b97d51953
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[HACK] Fix uart driver code

Change-Id: I98f599b91ffd2a55a5b75e234a8d01fc938d24cc
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[HACK] remove clock setting code

Change-Id: Ib34be34cd4a23277a8cb29dcf9592ec6abfded27
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] dt-binding: samsung: Add exynos9610 binding header

Change-Id: I4e929e5f320bd5280cc0d202046ac28373b77864
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: dtsi: Enable MP.

Change-Id: Ic7aa24f6606942432ec7da6ff34ce5daefa42465
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: dts: Change name maestro-erd dts

Change-Id: Ice6f679ab908d646cd524418056a905c040ccb43
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] clk: samsung: Added exynos9610 clk driver.

Change-Id: I883a7fb07ad763dc593d15fa605786e06c7feea0
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[9610][ERD] arm64: defconfig: create initial erd9610_defconfig

Change-Id: I9312ff832ae185d933f59b7387c8b15db048f0f4
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] arm64: dtsi: create initial pinctrl dtsi of exynos9610

Change-Id: Id625b29839962c7cb1efab1da1dfbd3b19189814
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610][ERD] arm64: dts: create initial exynos9610 MAESTRO-ERD board dts

Change-Id: I5eaffd942d1b0208414c294cbec7a0e9b4c68faa
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: dtsi: create initial dtsi of exynos9610

Change-Id: I729265cf614990adb37c93a81bea28f085277341
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] soc: samsung: Add EXYNOS9610 chip-id information

Change-Id: I39715d220ff9bcd9e62c1bb5667168eee08f8cc4
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: Add SOC_EXYNOS9610 in Kconfig.platforms.

Change-Id: I66eb552449e867d4788aa583da7faa7bbc97bc2f
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] pinctrl: samsung: support debug show

Each pin is possible to show its register value through DEBUG_FS.
This patch supports it like below:

  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pinconf-pins
  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pinconf-groups
  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pins

Change-Id: I99a05520946d7299ff692a1043b5b5390f33dd0f
Signed-off-by: eunki_kim <eunki_kim@samsung.com>

[COMMON] pinctrl: samsung: add pinctrl_force_sleep for sleep state configuration

Change-Id: I608701d120774998ff771d084a0da13b1675ec9d
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[COMMON] pinctrl: samsung: change FLTCON register setting routine.

The FLTCON register offset of each GPIO block is not regular.
To support irregular FLTCON offset of all GPIO block,
we should use fltcon_offset value in driver data to set FLTCON properly.

And we need to check whether both FLTCON0 and FLTCON1 should be set or not.
When nr_pins(The number of pins in the signle GPIO bank)
is greater than 4(The max number of pins in the single GPIO bank),
The FILTCON1 register also should be set.
When nr_pins is not greater than 4, we don't need to set FLTCON1.

Only alive block(gpa) has the filter selection bit.
So we need to set filter selction bit in case of alive block.
If some GPIO block is not alive, we should not set filter selection bit.

Change-Id: Icadc5f8df49fbf9b983918150e7016f96c40e57c
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] pinctrl: samsung: add initial definition of pinctrl for exynos9610

Change-Id: Ie628d29ab948bac4a31aa343087115fb174cc87f
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] pinctrl: samsung : Add eint filter control register offset filed

To support eint filter control setting, we should describe
enit FLTCON register offset in EXYNOS9_PIN_BANK_EINT macro.
With fltcon_offset, we can set FLTCON regiseter of each GPIO block.

Change-Id: I5754fbfba1f7bd89c8218c5329af1c91081fac77
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[COMMON] clocksource: exynos_mct: add flags as IRQF_PERCPU

This flags prevents to migrate timer interrupt to other cpu.

Change-Id: Iabc2e3607b51cc879c2eb3ab02ed897d4ae8506f
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: exynos_mct: change H/W control sequence

This commit changes H/W control sequence of a majority in
exynos_mct codes. Because changed codes are mass-produced already
but mainline code is not so.

Change-Id: I168e289b06eddf4a53df66c8c11a4df52d11fd4d
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: exynos_mct: use only as clockevent

This commit set exynos_mct to use clockevent only.

Change-Id: Ie1a103f2a3b5b6283a868f542e1ab0337242d26f
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: arm_arch_timer: clocksource only flag for exynos

This commit adds the specific flag for using clocksource only in exynos.
It is so specific flag for exynos because exynos uses special power
feature for cpu on/off in the short time we called it c2 mode.

In exynos SoC, clocksource is used as arm_arch_timer and clockevent
is used as exynos_mct.

Change-Id: I411ea46d0f8997e3507adc7e60cb8996507e025b
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] arm64: adds map.h to arch/arm64/include/asm

This commit adds map.h into "arch/arm64/include/asm".

Change-Id: I687d590065b9c4c93de62d2948b5aa5d01ed89fd
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] trace: ess: adds exynos-snapshot header for exynos soc

This commit adds exynos-snapshoti header into 'include/linux/".

Change-Id: I1588fdf2b306a34545878bf921fd1cd58f057b4e
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] arm64: Add exynos-smc.s and smc.h files

This patch adds 'exynos-smc.s' to 'arch/arm64/kernel' and 'smc.h'
to 'include/linux'.

Change-Id: Ib9d72f6bd840945e70c20e9478100a9770d8a284
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] soc: chipid: Add unique_id for adb

Change-Id: I144b1d2f806f949bb9a4f2a722296c3fbcbe6b99
Signed-off-by: Changki Kim <changki.kim@samsung.com>

[COMMON] soc: samsung: fix to declare platform driver for exynos-chipid

This commit fixes that exynos-chipid declared the platform driver
structure with __initdata section. The platform driver is used always
seaching by kernel platform driver framework.
If it is declared with __initdata, it's region is released by kernel
after booting.

Change-Id: I5776ff20d877a021c42f01d05d4cb2a1a6a24939
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] soc: samsung: add exynos chipid driver support

Exynos SoCs have Chipid, for identification of product IDs
and SoC revisions. This patch intendes to provide initialization
code for all these functionalites.

This driver usese existing binding for exnos-chipid.

CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>
Conflicts:

drivers/soc/Kconfig
drivers/soc/Makefile
drivers/soc/samsung/Kconfig
drivers/soc/samsung/Makefile

Change-Id: I1271233bcbbc2509e0a0fe69b24de8b3a0044418

Merge 4.14.32 into android-4.14

Changes in 4.14.32
tcp: reset sk_send_head in tcp_write_queue_purge
tcp: purge write queue upon aborting the connection
qed: Fix non TCP packets should be dropped on iWARP ll2 connection
sysfs: symlink: export sysfs_create_link_nowarn()
net: phy: relax error checking when creating sysfs link netdev->phydev
devlink: Remove redundant free on error path
macvlan: filter out unsupported feature flags
net: ipv6: keep sk status consistent after datagram connect failure
ipv6: old_dport should be a __be16 in __ip6_datagram_connect()
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
mlxsw: spectrum_buffers: Set a minimum quota for CPU port traffic
net: phy: Tell caller result of phy_change()
net sched actions: return explicit error when tunnel_key mode is not specified
ppp: avoid loop in xmit recursion detection code
rhashtable: Fix rhlist duplicates insertion
kcm: lock lower socket in kcm_attach
sch_netem: fix skb leak in netem_enqueue()
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
net: use skb_to_full_sk() in skb_update_prio()
net: Fix hlist corruptions in inet_evict_bucket()
dccp: check sk for closed state in dccp_sendmsg()
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
l2tp: do not accept arbitrary sockets
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: fec: Fix unbalanced PM runtime calls
net/iucv: Free memory obtained by kzalloc
netlink: avoid a double skb free in genlmsg_mcast()
net: Only honor ifindex in IP_PKTINFO if non-0
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
qede: Fix qedr link update
skbuff: Fix not waking applications when errors are enqueued
team: Fix double free in error path
soc/fsl/qbman: fix issue in qman_delete_cgr_safe()
dpaa_eth: fix error in dpaa_remove()
dpaa_eth: remove duplicate initialization
dpaa_eth: increment the RX dropped counter when needed
dpaa_eth: remove duplicate increment of the tx_errors counter
s390/qeth: free netdevice when removing a card
s390/qeth: when thread completes, wake up all waiters
s390/qeth: lock read device while queueing next buffer
s390/qeth: on channel error, reject further cmd requests
Linux 4.14.32

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.14.32

s390/qeth: on channel error, reject further cmd requests

[ Upstream commit a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ]

When the IRQ handler determines that one of the cmd IO channels has
failed and schedules recovery, block any further cmd requests from
being submitted. The request would inevitably stall, and prevent the
recovery from making progress until the request times out.

This sort of error was observed after Live Guest Relocation, where
the pending IO on the READ channel intentionally gets terminated to
kick-start recovery. Simultaneously the guest executed SIOCETHTOOL,
triggering qeth to issue a QUERY CARD INFO command. The command
then stalled in the inoperabel WRITE channel.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: lock read device while queueing next buffer

[ Upstream commit 17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ]

For calling ccw_device_start(), issue_next_read() needs to hold the
device's ccwlock.
This is satisfied for the IRQ handler path (where qeth_irq() gets called
under the ccwlock), but we need explicit locking for the initial call by
the MPC initialization.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: when thread completes, wake up all waiters

[ Upstream commit 1063e432bb45be209427ed3f1ca3908e4aa3c7d7 ]

qeth_wait_for_threads() is potentially called by multiple users, make
sure to notify all of them after qeth_clear_thread_running_bit()
adjusted the thread_running_mask. With no timeout, callers would
otherwise stall.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: free netdevice when removing a card

[ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ]

On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
lx_remove_device(card)
unregister_netdev(card->dev)
card->dev = NULL !!!
qeth_core_free_card(card)
if (card->dev) !!!
free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: remove duplicate increment of the tx_errors counter

[ Upstream commit 82d141cd19d088ee41feafde4a6f86eeb40d93c5 ]

The tx_errors counter is incremented by the dpaa_xmit caller.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: increment the RX dropped counter when needed

[ Upstream commit e4d1b37c17d000a3da9368a3e260fb9ea4927c25 ]

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: remove duplicate initialization

[ Upstream commit 565186362b73226a288830abe595f05f0cec0bbc ]

The fd_format has already been initialized at this point.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: fix error in dpaa_remove()

[ Upstream commit 88075256ee817041d68c2387f29065b5cb2b342a ]

The recent changes that make the driver probing compatible with DSA
were not propagated in the dpa_remove() function, breaking the
module unload function. Using the proper device to address the issue.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc/fsl/qbman: fix issue in qman_delete_cgr_safe()

[ Upstream commit 96f413f47677366e0ae03797409bfcc4151dbf9e ]

The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: Fix double free in error path

[ Upstream commit cbcc607e18422555db569b593608aec26111cb0b ]

The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.

The current code tries to release the skb in case of failure which
causes redundant freeing.

Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: Fix not waking applications when errors are enqueued

[ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]

When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: Fix qedr link update

[ Upstream commit 4609adc27175839408359822523de7247d56c87f ]

Link updates were not reported to qedr correctly.
Leading to cases where a link could be down, but qedr
would see it as up.
In addition, once qede was loaded, link state would be up,
regardless of the actual link state.

Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Rewrite __bcm_sysport_tx_reclaim()

[ Upstream commit 484d802d0f2f29c335563fcac2a8facf174a1bbc ]

There is no need for complex checking between the last consumed index
and current consumed index, a simple subtraction will do.

This also eliminates the possibility of a permanent transmit queue stall
under the following conditions:

- one CPU bursts ring->size worth of traffic (up to 256 buffers), to the
  point where we run out of free descriptors, so we stop the transmit
  queue at the end of bcm_sysport_xmit()

- because of our locking, we have the transmit process disable
  interrupts which means we can be blocking the TX reclamation process

- when TX reclamation finally runs, we will be computing the difference
  between ring->c_index (last consumed index by SW) and what the HW
  reports through its register

- this register is masked with (ring->size - 1) = 0xff, which will lead
  to stripping the upper bits of the index (register is 16-bits wide)

- we will be computing last_tx_cn as 0, which means there is no work to
  be done, and we never wake-up the transmit queue, leaving it
  permanently disabled

A practical example is e.g: ring->c_index aka last_c_index = 12, we
pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12,
so last_tx_cn == 0, nothing happens.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Only honor ifindex in IP_PKTINFO if non-0

[ Upstream commit 2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ]

Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: avoid a double skb free in genlmsg_mcast()

[ Upstream commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb ]

nlmsg_multicast() consumes always the skb, thus the original skb must be
freed only when this function is called with a clone.

Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/iucv: Free memory obtained by kzalloc

[ Upstream commit fa6a91e9b907231d2e38ea5ed89c537b3525df3d ]

Free memory by calling put_device(), if afiucv_iucv_init is not
successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: Fix unbalanced PM runtime calls

[ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ]

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface

[ Upstream commit f9db50691db4a7d860fce985f080bb3fc23a7ede ]

According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and
DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only
available when PHY is configured in RGMII mode with 10Mbps speed. It will
cause some networking issues without RGMII mode, such as carrier sense
errors and low throughput. TI also mentioned this issue in their forum[4].

This patch adds the check mechanism for PHY interface with RGMII interface
type, the in-band mode can only be set in RGMII mode with 10Mbps speed.

References:
[1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
[2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf
[3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf
[4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155

Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred

[ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ]

If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.

Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: do not accept arbitrary sockets

[ Upstream commit 17cfe79a65f98abe535261856c5aef14f306dff7 ]

syzkaller found an issue caused by lack of sufficient checks
in l2tp_tunnel_create()

RAW sockets can not be considered as UDP ones for instance.

In another patch, we shall replace all pr_err() by less intrusive
pr_debug() so that syzkaller can find other bugs faster.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
==================================================================
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
dst_release: dst:00000000d53d0d0f refcnt:-1
Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242

CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23b/0x360 mm/kasan/report.c:412
 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435
 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596
 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707
 SYSC_connect+0x213/0x4a0 net/socket.c:1640
 SyS_connect+0x24/0x30 net/socket.c:1621
 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()

[ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ]

Fix the following slab-out-of-bounds kasan report in
ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not
linear and the accessed data are not in the linear data region of orig_skb.

[ 1503.122508] ==================================================================
[ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990
[ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932

[ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124
[ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[ 1503.123527] Call Trace:
[ 1503.123579]  <IRQ>
[ 1503.123638]  print_address_description+0x6e/0x280
[ 1503.123849]  kasan_report+0x233/0x350
[ 1503.123946]  memcpy+0x1f/0x50
[ 1503.124037]  ndisc_send_redirect+0x94e/0x990
[ 1503.125150]  ip6_forward+0x1242/0x13b0
[...]
[ 1503.153890] Allocated by task 1932:
[ 1503.153982]  kasan_kmalloc+0x9f/0xd0
[ 1503.154074]  __kmalloc_track_caller+0xb5/0x160
[ 1503.154198]  __kmalloc_reserve.isra.41+0x24/0x70
[ 1503.154324]  __alloc_skb+0x130/0x3e0
[ 1503.154415]  sctp_packet_transmit+0x21a/0x1810
[ 1503.154533]  sctp_outq_flush+0xc14/0x1db0
[ 1503.154624]  sctp_do_sm+0x34e/0x2740
[ 1503.154715]  sctp_primitive_SEND+0x57/0x70
[ 1503.154807]  sctp_sendmsg+0xaa6/0x1b10
[ 1503.154897]  sock_sendmsg+0x68/0x80
[ 1503.154987]  ___sys_sendmsg+0x431/0x4b0
[ 1503.155078]  __sys_sendmsg+0xa4/0x130
[ 1503.155168]  do_syscall_64+0x171/0x3f0
[ 1503.155259]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.155436] Freed by task 1932:
[ 1503.155527]  __kasan_slab_free+0x134/0x180
[ 1503.155618]  kfree+0xbc/0x180
[ 1503.155709]  skb_release_data+0x27f/0x2c0
[ 1503.155800]  consume_skb+0x94/0xe0
[ 1503.155889]  sctp_chunk_put+0x1aa/0x1f0
[ 1503.155979]  sctp_inq_pop+0x2f8/0x6e0
[ 1503.156070]  sctp_assoc_bh_rcv+0x6a/0x230
[ 1503.156164]  sctp_inq_push+0x117/0x150
[ 1503.156255]  sctp_backlog_rcv+0xdf/0x4a0
[ 1503.156346]  __release_sock+0x142/0x250
[ 1503.156436]  release_sock+0x80/0x180
[ 1503.156526]  sctp_sendmsg+0xbb0/0x1b10
[ 1503.156617]  sock_sendmsg+0x68/0x80
[ 1503.156708]  ___sys_sendmsg+0x431/0x4b0
[ 1503.156799]  __sys_sendmsg+0xa4/0x130
[ 1503.156889]  do_syscall_64+0x171/0x3f0
[ 1503.156980]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.157158] The buggy address belongs to the object at ffff8800298ab600
                which belongs to the cache kmalloc-1024 of size 1024
[ 1503.157444] The buggy address is located 176 bytes inside of
                1024-byte region [ffff8800298ab600, ffff8800298aba00)
[ 1503.157702] The buggy address belongs to the page:
[ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0
[ 1503.158053] flags: 0x4000000000008100(slab|head)
[ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e
[ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000
[ 1503.158523] page dumped because: kasan: bad access detected

[ 1503.158698] Memory state around the buggy address:
[ 1503.158816]  ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.158988]  ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1503.159338]                    ^
[ 1503.159436]  ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159610]  ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159785] ==================================================================
[ 1503.159964] Disabling lock debugging due to kernel taint

The test scenario to trigger the issue consists of 4 devices:
- H0: data sender, connected to LAN0
- H1: data receiver, connected to LAN1
- GW0 and GW1: routers between LAN0 and LAN1. Both of them have an
  ethernet connection on LAN0 and LAN1
On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for
data from LAN0 to LAN1.
Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent
data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send
buffer size is set to 16K). While data streams are active flush the route
cache on HA multiple times.
I have not been able to identify a given commit that introduced the issue
since, using the reproducer described above, the kasan report has been
triggered from 4.14 and I have not gone back further.

Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: check sk for closed state in dccp_sendmsg()

[ Upstream commit 67f93df79aeefc3add4e4b31a752600f834236e2 ]

dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL,
therefore if DCCP socket is disconnected and dccp_sendmsg() is
called after it, it will cause a NULL pointer dereference in
dccp_write_xmit().

This crash and the reproducer was reported by syzbot. Looks like
it is reproduced if commit 69c64866ce07 ("dccp: CVE-2017-8824:
use-after-free in DCCP code") is applied.

Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix hlist corruptions in inet_evict_bucket()

[ Upstream commit a560002437d3646dafccecb1bf32d1685112ddda ]

inet_evict_bucket() iterates global list, and
several tasks may call it in parallel. All of
them hash the same fq->list_evictor to different
lists, which leads to list corruption.

This patch makes fq be hashed to expired list
only if this has not been made yet by another
task. Since inet_frag_alloc() allocates fq
using kmem_cache_zalloc(), we may rely on
list_evictor is initially unhashed.

The problem seems to exist before async
pernet_operations, as there was possible to have
exit method to be executed in parallel with
inet_frags::frags_work, so I add two Fixes tags.
This also may go to stable.

Fixes: d1fe19444d82 "inet: frag: don't re-use chainlist for evictor"
Fixes: f84c6821aa54 "net: Convert pernet_subsys, registered from inet_init()"
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: use skb_to_full_sk() in skb_update_prio()

[ Upstream commit 4dcb31d4649df36297296b819437709f5407059c ]

Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()

Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()

Also add the const qualifier to sock_cgroup_classid() for consistency.

Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()

[ Upstream commit ca0edb131bdf1e6beaeb2b8289fd6b374b74147d ]

A tun device type can trivially be set to arbitrary value using
TUNSETLINK ioctl().

Therefore, lowpan_device_event() must really check that ieee802154_ptr
is not NULL.

Fixes: 2c88b5283f60d ("ieee802154: 6lowpan: remove check on null")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_netem: fix skb leak in netem_enqueue()

[ Upstream commit 35d889d10b649fda66121891ec05eca88150059d ]

When we exceed current packets limit and we have more than one
segment in the list returned by skb_gso_segment(), netem drops
only the first one, skipping the rest, hence kmemleak reports:

unreferenced object 0xffff880b5d23b600 (size 1024):
  comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s)
  hex dump (first 32 bytes):
    00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00  ..#]............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d8a19b9d>] __alloc_skb+0xc9/0x520
    [<000000001709b32f>] skb_segment+0x8c8/0x3710
    [<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830
    [<00000000c921cba1>] inet_gso_segment+0x476/0x1370
    [<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510
    [<000000002182660a>] __skb_gso_segment+0x1dd/0x620
    [<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem]
    [<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120
    [<00000000fc5f7327>] ip_finish_output2+0x998/0xf00
    [<00000000d309e9d3>] ip_output+0x1aa/0x2c0
    [<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670
    [<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0
    [<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540
    [<0000000013d06d02>] tasklet_action+0x1ca/0x250
    [<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3
    [<00000000e7ed027c>] irq_exit+0x1e2/0x210

Fix it by adding the rest of the segments, if any, to skb 'to_free'
list. Add new __qdisc_drop_all() and qdisc_drop_all() functions
because they can be useful in the future if we need to drop segmented
GSO packets in other places.

Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: lock lower socket in kcm_attach

[ Upstream commit 2cc683e88c0c993ac3721d9b702cb0630abe2879 ]

Need to lock lower socket in order to provide mutual exclusion
with kcm_unattach.

v2: Add Reported-by for syzbot

Fixes: ab7ac4eb9832e32a09f4e804 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rhashtable: Fix rhlist duplicates insertion

[ Upstream commit d3dcf8eb615537526bd42ff27a081d46d337816e ]

When inserting duplicate objects (those with the same key),
current rhlist implementation messes up the chain pointers by
updating the bucket pointer instead of prev next pointer to the
newly inserted node. This causes missing elements on removal and
travesal.

Fix that by properly updating pprev pointer to point to
the correct rhash_head next pointer.

Issue: 1241076
Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7
Fixes: ca26893f05e8 ('rhashtable: Add rhlist interface')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: avoid loop in xmit recursion detection code

[ Upstream commit 6d066734e9f09cdea4a3b9cb76136db3f29cfb02 ]

We already detect situations where a PPP channel sends packets back to
its upper PPP device. While this is enough to avoid deadlocking on xmit
locks, this doesn't prevent packets from looping between the channel
and the unit.

The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq
before checking for xmit recursion. Therefore, __ppp_xmit_process()
might dequeue a packet from ppp->file.xq and send it on the channel
which, in turn, loops it back on the unit. Then ppp_start_xmit()
queues the packet back to ppp->file.xq and __ppp_xmit_process() picks
it up and sends it again through the channel. Therefore, the packet
will loop between __ppp_xmit_process() and ppp_start_xmit() until some
other part of the xmit path drops it.

For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops
the packet after a few iterations. But PPTP reallocates the headroom
if necessary, letting the loop run and exhaust the machine resources
(as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109).

Fix this by letting __ppp_xmit_process() enqueue the skb to
ppp->file.xq, so that we can check for recursion before adding it to
the queue. Now ppp_xmit_process() can drop the packet when recursion is
detected.

__ppp_channel_push() is a bit special. It calls __ppp_xmit_process()
without having any actual packet to send. This is used by
ppp_output_wakeup() to re-enable transmission on the parent unit (for
implementations like ppp_async.c, where the .start_xmit() function
might not consume the skb, leaving it in ppp->xmit_pending and
disabling transmission).
Therefore, __ppp_xmit_process() needs to handle the case where skb is
NULL, dequeuing as many packets as possible from ppp->file.xq.

Reported-by: xu heng <xuheng333@zoho.com>
Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net sched actions: return explicit error when tunnel_key mode is not specified

[ Upstream commit 51d4740f88affd85d49c04e3c9cd129c0e33bcb9 ]

If set/unset mode of the tunnel_key action is not provided, ->init() still
returns 0, and the caller proceeds with bogus 'struct tc_action *' object,
this results in crash:

% tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1

[   35.805515] general protection fault: 0000 [#1] SMP PTI
[   35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64
crypto_simd glue_helper cryptd serio_raw
[   35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ #286
[   35.808929] RIP: 0010:tcf_action_init+0x90/0x190
[   35.809457] RSP: 0018:ffffb8edc068b9a0 EFLAGS: 00010206
[   35.810053] RAX: 1320c000000a0003 RBX: 0000000000000001 RCX: 0000000000000000
[   35.810866] RDX: 0000000000000070 RSI: 0000000000007965 RDI: ffffb8edc068b910
[   35.811660] RBP: ffffb8edc068b9d0 R08: 0000000000000000 R09: ffffb8edc068b808
[   35.812463] R10: ffffffffc02bf040 R11: 0000000000000040 R12: ffffb8edc068bb38
[   35.813235] R13: 0000000000000000 R14: 0000000000000000 R15: ffffb8edc068b910
[   35.814006] FS:  00007f3d0d8556c0(0000) GS:ffff91d1dbc40000(0000)
knlGS:0000000000000000
[   35.814881] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.815540] CR2: 000000000043f720 CR3: 0000000019248001 CR4: 00000000001606a0
[   35.816457] Call Trace:
[   35.817158]  tc_ctl_action+0x11a/0x220
[   35.817795]  rtnetlink_rcv_msg+0x23d/0x2e0
[   35.818457]  ? __slab_alloc+0x1c/0x30
[   35.819079]  ? __kmalloc_node_track_caller+0xb1/0x2b0
[   35.819544]  ? rtnl_calcit.isra.30+0xe0/0xe0
[   35.820231]  netlink_rcv_skb+0xce/0x100
[   35.820744]  netlink_unicast+0x164/0x220
[   35.821500]  netlink_sendmsg+0x293/0x370
[   35.822040]  sock_sendmsg+0x30/0x40
[   35.822508]  ___sys_sendmsg+0x2c5/0x2e0
[   35.823149]  ? pagecache_get_page+0x27/0x220
[   35.823714]  ? filemap_fault+0xa2/0x640
[   35.824423]  ? page_add_file_rmap+0x108/0x200
[   35.825065]  ? alloc_set_pte+0x2aa/0x530
[   35.825585]  ? finish_fault+0x4e/0x70
[   35.826140]  ? __handle_mm_fault+0xbc1/0x10d0
[   35.826723]  ? __sys_sendmsg+0x41/0x70
[   35.827230]  __sys_sendmsg+0x41/0x70
[   35.827710]  do_syscall_64+0x68/0x120
[   35.828195]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[   35.828859] RIP: 0033:0x7f3d0ca4da67
[   35.829331] RSP: 002b:00007ffc9f284338 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[   35.830304] RAX: ffffffffffffffda RBX: 00007ffc9f284460 RCX: 00007f3d0ca4da67
[   35.831247] RDX: 0000000000000000 RSI: 00007ffc9f2843b0 RDI: 0000000000000003
[   35.832167] RBP: 000000005aa6a7a9 R08: 0000000000000001 R09: 0000000000000000
[   35.833075] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000
[   35.833997] R13: 00007ffc9f2884c0 R14: 0000000000000001 R15: 0000000000674640
[   35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2
fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48
8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c
[   35.837442] RIP: tcf_action_init+0x90/0x190 RSP: ffffb8edc068b9a0
[   35.838291] ---[ end trace a095c06ee4b97a26 ]---

Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Tell caller result of phy_change()

[ Upstream commit a2c054a896b8ac794ddcfc7c92e2dc7ec4ed4ed5 ]

In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.

With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum_buffers: Set a minimum quota for CPU port traffic

[ Upstream commit bcdd5de80a2275f7879dc278bfc747f1caf94442 ]

In commit 9ffcc3725f09 ("mlxsw: spectrum: Allow packets to be trapped
from any PG") I fixed a problem where packets could not be trapped to
the CPU due to exceeded shared buffer quotas. The mentioned commit
explains the problem in detail.

The problem was fixed by assigning a minimum quota for the CPU port and
the traffic class used for scheduling traffic to the CPU.

However, commit 117b0dad2d54 ("mlxsw: Create a different trap group list
for each device") assigned different traffic classes to different
packet types and rendered the fix useless.

Fix the problem by assigning a minimum quota for the CPU port and all
the traffic classes that are currently in use.

Fixes: 117b0dad2d54 ("mlxsw: Create a different trap group list for each device")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Eddie Shklaer <eddies@mellanox.com>
Tested-by: Eddie Shklaer <eddies@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state

[ Upstream commit 191f86ca8ef27f7a492fd1c03620498c6e94f0ac ]

The seg6_build_state() function is called with RCU read lock held,
so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead.

[   92.770271] =============================
[   92.770628] WARNING: suspicious RCU usage
[   92.770921] 4.16.0-rc4+ #12 Not tainted
[   92.771277] -----------------------------
[   92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[   92.772279]
[   92.772279] other info that might help us debug this:
[   92.772279]
[   92.773067]
[   92.773067] rcu_scheduler_active = 2, debug_locks = 1
[   92.773514] 2 locks held by ip/2413:
[   92.773765]  #0:  (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0
[   92.774377]  #1:  (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210
[   92.775065]
[   92.775065] stack backtrace:
[   92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12
[   92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
[   92.776608] Call Trace:
[   92.776852]  dump_stack+0x7d/0xbc
[   92.777130]  __schedule+0x133/0xf00
[   92.777393]  ? unwind_get_return_address_ptr+0x50/0x50
[   92.777783]  ? __sched_text_start+0x8/0x8
[   92.778073]  ? rcu_is_watching+0x19/0x30
[   92.778383]  ? kernel_text_address+0x49/0x60
[   92.778800]  ? __kernel_text_address+0x9/0x30
[   92.779241]  ? unwind_get_return_address+0x29/0x40
[   92.779727]  ? pcpu_alloc+0x102/0x8f0
[   92.780101]  _cond_resched+0x23/0x50
[   92.780459]  __mutex_lock+0xbd/0xad0
[   92.780818]  ? pcpu_alloc+0x102/0x8f0
[   92.781194]  ? seg6_build_state+0x11d/0x240
[   92.781611]  ? save_stack+0x9b/0xb0
[   92.781965]  ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0
[   92.782480]  ? seg6_build_state+0x11d/0x240
[   92.782925]  ? lwtunnel_build_state+0x1bd/0x210
[   92.783393]  ? ip6_route_info_create+0x687/0x1640
[   92.783846]  ? ip6_route_add+0x74/0x110
[   92.784236]  ? inet6_rtm_newroute+0x8a/0xd0

Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: sr: fix NULL pointer dereference when setting encap source address

[ Upstream commit 8936ef7604c11b5d701580d779e0f5684abc7b68 ]

When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the
source address of the outer IPv6 header, in case none was specified.
Using skb->dev can lead to BUG() when it is in an inconsistent state.
This patch uses the net_device attached to the skb's dst instead.

[940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c
[940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0
[940807.815725] PGD 0 P4D 0
[940807.847173] Oops: 0000 [#1] SMP PTI
[940807.890073] Modules linked in:
[940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G        W        4.16.0-rc1-seg6bpf+ #2
[940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26    09/06/2010
[940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0
[940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206
[940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe
[940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500
[940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff
[940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850
[940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002
[940808.684675] FS:  0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[940808.783036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0
[940808.939634] Call Trace:
[940808.970041]  <IRQ>
[940808.995250]  ? ip6t_do_table+0x265/0x640
[940809.043341]  seg6_do_srh_encap+0x28f/0x300
[940809.093516]  ? seg6_do_srh+0x1a0/0x210
[940809.139528]  seg6_do_srh+0x1a0/0x210
[940809.183462]  seg6_output+0x28/0x1e0
[940809.226358]  lwtunnel_output+0x3f/0x70
[940809.272370]  ip6_xmit+0x2b8/0x530
[940809.313185]  ? ac6_proc_exit+0x20/0x20
[940809.359197]  inet6_csk_xmit+0x7d/0xc0
[940809.404173]  tcp_transmit_skb+0x548/0x9a0
[940809.453304]  __tcp_retransmit_skb+0x1a8/0x7a0
[940809.506603]  ? ip6_default_advmss+0x40/0x40
[940809.557824]  ? tcp_current_mss+0x24/0x90
[940809.605925]  tcp_retransmit_skb+0xd/0x80
[940809.654016]  tcp_xmit_retransmit_queue.part.17+0xf9/0x210
[940809.719797]  tcp_ack+0xa47/0x1110
[940809.760612]  tcp_rcv_established+0x13c/0x570
[940809.812865]  tcp_v6_do_rcv+0x151/0x3d0
[940809.858879]  tcp_v6_rcv+0xa5c/0xb10
[940809.901770]  ? seg6_output+0xdd/0x1e0
[940809.946745]  ip6_input_finish+0xbb/0x460
[940809.994837]  ip6_input+0x74/0x80
[940810.034612]  ? ip6_rcv_finish+0xb0/0xb0
[940810.081663]  ipv6_rcv+0x31c/0x4c0
...

Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: old_dport should be a __be16 in __ip6_datagram_connect()

[ Upstream commit 5f2fb802eee1df0810b47ea251942fe3fd36589a ]

Fixes: 2f987a76a977 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: keep sk status consistent after datagram connect failure

[ Upstream commit 2f987a76a97773beafbc615b9c4d8fe79129a7f4 ]

On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.

If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.

Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.

v1 -> v2:
 - added missing Fixes tag

Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: filter out unsupported feature flags

[ Upstream commit 13fbcc8dc573482dd3f27568257fd7087f8935f4 ]

Adding a macvlan device on top of a lowerdev that supports
the xfrm offloads fails with a new regression:
  # ip link add link ens1f0 mv0 type macvlan
  RTNETLINK answers: Operation not permitted

Tracing down the failure shows that the macvlan device inherits
the NETIF_F_HW_ESP and NETIF_F_HW_ESP_TX_CSUM feature flags
from the lowerdev, but with no dev->xfrmdev_ops API filled
in, it doesn't actually support xfrm.  When the request is
made to add the new macvlan device, the XFRM listener for
NETDEV_REGISTER calls xfrm_api_check() which fails the new
registration because dev->xfrmdev_ops is NULL.

The macvlan creation succeeds when we filter out the ESP
feature flags in macvlan_fix_features(), so let's filter them
out like we're already filtering out ~NETIF_F_NETNS_LOCAL.
When XFRM support is added in the future, we can add the flags
into MACVLAN_FEATURES.

This same problem could crop up in the future with any other
new feature flags, so let's filter out any flags that aren't
defined as supported in macvlan.

Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: Remove redundant free on error path

[ Upstream commit 7fe4d6dcbcb43fe0282d4213fc52be178bb30e91 ]

The current code performs unneeded free. Remove the redundant skb freeing
during the error path.

Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: relax error checking when creating sysfs link netdev->phydev

[ Upstream commit 4414b3ed74be0e205e04e12cd83542a727d88255 ]

Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY. As result, second CPSW external
port will became unusable.

Fix it by relaxing error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppressing warning by using
sysfs_create_link_nowarn() and adding error message instead.
After this change links (phy->netdev and netdev->phy) creation failure is not
fatal any more and system can continue working, which fixes TI CPSW issue.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs: symlink: export sysfs_create_link_nowarn()

[ Upstream commit 2399ac42e762ab25c58420e25359b2921afdc55f ]

The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix non TCP packets should be dropped on iWARP ll2 connection

[ Upstream commit 16da09047d3fb991dc48af41f6d255fd578e8ca2 ]

FW workaround. The iWARP LL2 connection did not expect TCP packets
to arrive on it's connection. The fix drops any non-tcp packets

Fixes b5c29ca ("qed: iWARP CM - setup a ll2 connection for handling
SYN packets")

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: purge write queue upon aborting the connection

[ Upstream commit e05836ac07c77dd90377f8c8140bce2a44af5fe7 ]

When the connection is aborted, there is no point in
keeping the packets on the write queue until the connection
is closed.

Similar to a27fd7a8ed38 ('tcp: purge write queue upon RST'),
this is essential for a correct MSG_ZEROCOPY implementation,
because userspace cannot call close(fd) before receiving
zerocopy signals even when the connection is aborted.

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: reset sk_send_head in tcp_write_queue_purge

tcp_write_queue_purge clears all the SKBs in the write queue
but does not reset the sk_send_head. As a result, we can have
a NULL pointer dereference anywhere that we use tcp_send_head
instead of the tcp_write_queue_tail.

For example, after a27fd7a8ed38 (tcp: purge write queue upon RST),
we can purge the write queue on RST. Prior to
75c119afe14f (tcp: implement rb-tree based retransmit queue),
tcp_push will only check tcp_send_head and then accesses
tcp_write_queue_tail to send the actual SKB. As a result, it will
dereference a NULL pointer.

This has been reported twice for 4.14 where we don't have
75c119afe14f:

By Timofey Titovets:

[  422.081094] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000038
[  422.081254] IP: tcp_push+0x42/0x110
[  422.081314] PGD 0 P4D 0
[  422.081364] Oops: 0002 [#1] SMP PTI

By Yongjian Xu:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: tcp_push+0x48/0x120
PGD 80000007ff77b067 P4D 80000007ff77b067 PUD 7fd989067 PMD 0
Oops: 0002 [#18] SMP PTI
Modules linked in: tcp_diag inet_diag tcp_bbr sch_fq iTCO_wdt
iTCO_vendor_support pcspkr ixgbe mdio i2c_i801 lpc_ich joydev input_leds shpchp
e1000e igb dca ptp pps_core hwmon mei_me mei ipmi_si ipmi_msghandler sg ses
scsi_transport_sas enclosure ext4 jbd2 mbcache sd_mod ahci libahci megaraid_sas
wmi ast ttm dm_mirror dm_region_hash dm_log dm_mod dax
CPU: 6 PID: 14156 Comm: [ET_NET 6] Tainted: G D 4.14.26-1.el6.x86_64 #1
Hardware name: LENOVO ThinkServer RD440 /ThinkServer RD440, BIOS A0TS80A
09/22/2014
task: ffff8807d78d8140 task.stack: ffffc9000e944000
RIP: 0010:tcp_push+0x48/0x120
RSP: 0018:ffffc9000e947a88 EFLAGS: 00010246
RAX: 00000000000005b4 RBX: ffff880f7cce9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff8807d00f5000
RBP: ffffc9000e947aa8 R08: 0000000000001c84 R09: 0000000000000000
R10: ffff8807d00f5158 R11: 0000000000000000 R12: ffff8807d00f5000
R13: 0000000000000020 R14: 00000000000256d4 R15: 0000000000000000
FS: 00007f5916de9700(0000) GS:ffff88107fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 00000007f8226004 CR4: 00000000001606e0
Call Trace:
tcp_sendmsg_locked+0x33d/0xe50
tcp_sendmsg+0x37/0x60
inet_sendmsg+0x39/0xc0
sock_sendmsg+0x49/0x60
sock_write_iter+0xb6/0x100
do_iter_readv_writev+0xec/0x130
? rw_verify_area+0x49/0xb0
do_iter_write+0x97/0xd0
vfs_writev+0x7e/0xe0
? __wake_up_common_lock+0x80/0xa0
? __fget_light+0x2c/0x70
? __do_page_fault+0x1e7/0x530
do_writev+0x60/0xf0
? inet_shutdown+0xac/0x110
SyS_writev+0x10/0x20
do_syscall_64+0x6f/0x140
? prepare_exit_to_usermode+0x8b/0xa0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x3135ce0c57
RSP: 002b:00007f5916de4b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000003135ce0c57
RDX: 0000000000000002 RSI: 00007f5916de4b90 RDI: 000000000000606f
RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f5916de8c38
R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000464cc
R13: 00007f5916de8c30 R14: 00007f58d8bef080 R15: 0000000000000002
Code: 48 8b 97 60 01 00 00 4c 8d 97 58 01 00 00 41 b9 00 00 00 00 41 89 f3 4c 39
d2 49 0f 44 d1 41 81 e3 00 80 00 00 0f 85 b0 00 00 00 <80> 4a 38 08 44 8b 8f 74
06 00 00 44 89 8f 7c 06 00 00 83 e6 01
RIP: tcp_push+0x48/0x120 RSP: ffffc9000e947a88
CR2: 0000000000000038
---[ end trace 8d545c2e93515549 ]---

Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST)
Reported-by: Timofey Titovets <nefelim4ag@gmail.com>
Reported-by: Yongjian Xu <yongjianchn@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Yongjian Xu <yongjianchn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.14.31 into android-4.14

Changes in 4.14.31
MIPS: ralink: Remove ralink_halt()
MIPS: ralink: Fix booting on MT7621
MIPS: lantiq: Fix Danube USB clock
MIPS: lantiq: Enable AHB Bus for USB
MIPS: lantiq: ase: Enable MFD_SYSCON
iio: chemical: ccs811: Corrected firmware boot/application mode transition
iio: st_pressure: st_accel: pass correct platform data to init
iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
ALSA: aloop: Sync stale timer before release
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: hda - Force polling mode on CFL for fixing codec communication
ALSA: hda/realtek - Fix speaker no sound after system resume
ALSA: hda/realtek - Fix Dell headset Mic can't record
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
mmc: core: Fix tracepoint print of blk_addr and blksz
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: block: fix updating ext_csd caches on ioctl call
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
lockdep: fix fs_reclaim warning
clk: bcm2835: Fix ana->maskX definitions
clk: bcm2835: Protect sections updating shared registers
clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
Drivers: hv: vmbus: Fix ring buffer signaling
pinctrl: samsung: Validate alias coming from DT
Bluetooth: btusb: Remove Yoga 920 from the btusb_needs_reset_resume_table
Bluetooth: btusb: Add Dell OptiPlex 3060 to btusb_needs_reset_resume_table
Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174
libata: fix length validation of ATAPI-relayed SCSI commands
libata: remove WARN() for DMA or PIO command without data
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Enable queued TRIM for Samsung SSD 860
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
cgroup: fix rule checking for threaded mode switching
nfsd: remove blocked locks on client teardown
hugetlbfs: check for pgoff value overflow
h8300: remove extraneous __BIG_ENDIAN definition
mm/vmalloc: add interfaces to free unmapped page table
x86/mm: implement free pmd/pte page interfaces
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
drm/vmwgfx: Fix black screen and device errors when running without fbdev
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/radeon: Don't turn off DP sink when disconnected
drm: Reject getfb for multi-plane framebuffers
drm: udl: Properly check framebuffer mmap offsets
mm/vmscan: wake up flushers for legacy cgroups too
acpi, numa: fix pxm to online numa node associations
ACPI / watchdog: Fix off-by-one error at resource assignment
libnvdimm, {btt, blk}: do integrity setup before add_disk()
brcmfmac: fix P2P_DEVICE ethernet address generation
rtlwifi: rtl8723be: Fix loss of signal
tracing: probeevent: Fix to support minus offset from symbol
mtdchar: fix usage of mtd_ooblayout_ecc()
mtd: nand: fsl_ifc: Fix nand waitfunc return value
mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
staging: ncpfs: memory corruption in ncp_read_kernel()
can: peak/pcie_fd: fix echo_skb is occupied! bug
can: peak/pcie_fd: remove useless code when interface starts
can: ifi: Repair the error handling
can: ifi: Check core revision upon probe
can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
can: cc770: Fix queue stall & dropped RTR reply
can: cc770: Fix use after free in cc770_tx_interrupt()
tty: vt: fix up tabstops properly
x86/entry/64: Don't use IST entry for #BP stack
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
x86/vsyscall/64: Use proper accessor to update P4D entry
x86/efi: Free efi_pgd with free_pages()
posix-timers: Protect posix clock array access against speculation
kvm/x86: fix icebp instruction handling
x86/build/64: Force the linker to use 2MB page size
x86/boot/64: Verify alignment of the LOAD segment
drm/syncobj: Stop reusing the same struct file for all syncobj -> fd
perf/x86/intel/uncore: Fix Skylake UPI event format
perf stat: Fix CVS output format for non-supported counters
perf/core: Fix ctx_event_type in ctx_resched()
perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
iio: ABI: Fix name of timestamp sysfs file
iio: imu: st_lsm6dsx: fix endianness in st_lsm6dsx_read_oneshot()
staging: android: ion: Zero CMA allocated memory
staging: lustre: ptlrpc: kfree used instead of kvfree
usb: xhci: Disable slot even when virt-dev is null
usb: xhci: Fix potential memory leak in xhci_disable_slot()
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
kbuild: disable clang's default use of -fmerge-all-constants
bpf: skip unnecessary capability check
bpf, x64: increase number of passes
Linux 4.14.31

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.14.31

bpf, x64: increase number of passes

commit 6007b080d2e2adb7af22bf29165f0594ea12b34c upstream.

In Cilium some of the main programs we run today are hitting 9 passes
on x64's JIT compiler, and we've had cases already where we surpassed
the limit where the JIT then punts the program to the interpreter
instead, leading to insertion failures due to CONFIG_BPF_JIT_ALWAYS_ON
or insertion failures due to the prog array owner being JITed but the
program to insert not (both must have the same JITed/non-JITed property).

One concrete case the program image shrunk from 12,767 bytes down to
10,288 bytes where the image converged after 16 steps. I've measured
that this took 340us in the JIT until it converges on my i7-6600U. Thus,
increase the original limit we had from day one where the JIT covered
cBPF only back then before we run into the case (as similar with the
complexity limit) where we trip over this and hit program rejections.
Also add a cond_resched() into the compilation loop, the JIT process
runs without any locks and may sleep anyway.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: skip unnecessary capability check

commit 0fa4fe85f4724fff89b09741c437cbee9cf8b008 upstream.

The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.

Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: disable clang's default use of -fmerge-all-constants

commit 87e0d4f0f37fb0c8c4aeeac46fff5e957738df79 upstream.

Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):

  [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
  [ 4134.820925] Mem abort info:
  [ 4134.901283]   Exception class = DABT (current EL), IL = 32 bits
  [ 4135.016736]   SET = 0, FnV = 0
  [ 4135.119820]   EA = 0, S1PTW = 0
  [ 4135.201431] Data abort info:
  [ 4135.301388]   ISV = 0, ISS = 0x00000021
  [ 4135.359599]   CM = 0, WnR = 0
  [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
  [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
  [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
  [ 4135.674610] Modules linked in:
  [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S      W       4.14.19+ #1
  [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
  [ 4135.731599] PC is at bpf_prog_add+0x20/0x68
  [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
  [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
  [ 4135.769062] sp : ffffff801d4e3ce0
  [...]
  [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
  [ 4136.273746] Call trace:
  [...]
  [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
  [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
  [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
  [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
  [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
  [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88

Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.

Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:

  Pointers with different bases cannot represent the same object.
  (Note that clang defaults to -fmerge-all-constants, which can
  lead to inconsistent results for comparisons involving the address
  of a constant; this generally doesn't matter in practice.)

The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:

  Languages like C or C++ require each variable, including multiple
  instances of the same variable in recursive calls, to have distinct
  locations, so using this option results in non-conforming behavior.

There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.

Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).

  $ gcc -fverbose-asm -O2 foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
    -> foo.S doesn't list -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled

Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.

  [1] https://bugs.llvm.org/show_bug.cgi?id=18538

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'

commit 91c49c2deb96ffc3c461eaae70219d89224076b7 upstream.

'si_pkey' is now #defined to be the name of the new siginfo field that
protection keys uses.  Rename it not to conflict.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001231.DFFC8285@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Fix potential memory leak in xhci_disable_slot()

commit cd3f1790b006d91786728c20a01da21ee277aff1 upstream.

xhci_disable_slot() allows the invoker to pass a command pointer
as paramenter. Otherwise, it will allocate one. This will cause
memory leak when a command structure was allocated inside of this
function while queuing command trb fails. Another problem comes up
when the invoker passed a command pointer, but xhci_disable_slot()
frees it when it detects a dead host.

This patch fixes these two problems by removing the command parameter
from xhci_disable_slot().

Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().")
Cc: Guoqing Zhang <guoqing.zhang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Disable slot even when virt-dev is null

commit b64149ca016c25f30b39ac5a8f37cfb9017e19bb upstream.

xhci_disable_slot() is a helper for disabling a slot when a device
goes away or recovers from error situations. Currently, it checks
the corespoding virt-dev pointer and returns directly (w/o issuing
disable slot command) if it's null.

This is unnecessary and will cause problems in case where virt-dev
allocation fails and xhci_disable_slot() is called to roll back the
hardware state. Refer to the implementation of xhci_alloc_dev().

This patch removes lines to check virt-dev in xhci_disable_slot().

Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().")
Cc: Guoqing Zhang <guoqing.zhang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>