crypto: inside-secure - optimize DSE bufferability control

Configure the data write bufferability to always buffer packets in the
DSE. This change slightly improves performance.

Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - enable single WR in DSE configuration

When enable_single_wr is not enabled, the DSE will only write those
parts of a result descriptor that need updating, which means a final
result descriptor will be written in 2 or 3 smaller transfers.
When enable_single_wr is enabled the DSE will combine these 2-3
updates into one large write transfer, generally improving performance.

Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - fix incorrect DSE data cache setting

Set the correct value to the DSE data cache, using WR_CACHE_3BITS
instead of RD_CACHE_3BITS. This fixes an incorrect setting and helps
improving performances.

Reported-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - fix the ring wr_cache offset

The EIP197_HIA_xDR_CFG_WR_CACHE macro was defined to use an offset of
23, which is wrong as it's actually 25. Fix this.

Reported-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - use hmac ipad/opad constants

Replace the hmac ipad/opad values by their defined constants.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Select device in Round Robin fashion

When multiple devices are present in system select device
in round-robin fashion for crypto operations

Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Reviewed-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Ensure Destination sg entry size less than 2k

Allocate new sg list in case received destination sg list has entry
greater that 2k.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: Add maintainer for chelsio crypto driver

Add myself as maintainer for chcr.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

chcr - Add debug counters

Count types of operation done by HW.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Add ctr mode and process large sg entries for cipher

It send multiple WRs to H/W to handle large sg lists. Adds ctr(aes)
and rfc(ctr(aes)) modes.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Avoid changing request structure

Do not update assoclen received in aead_request.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Return correct error code

Return correct error instead of EINVAL.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Fix fallback key setting

Set key of fallback tfm for rfc4309.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chcr - Pass lcb bit setting to firmware

GCM and CBC mode of operation requires Last Cipher Block.
This patch set lcb bit in WR header when required.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - fix spelling mistake "Revsion" -> "Revision"

Trivial fix to spelling mistake in seq_printf message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - fix spelling mistake "Encryptio" -> "Encryption"

Trivial fix to spelling mistake in pr_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - add testvector for pkcs1pad(rsa)

The PKCS#1 RSA implementation is provided with a self test with RSA 2048
and SHA-256. This self test implicitly covers other RSA keys and other
hashes. Also, this self test implies that the pkcs1pad(rsa) is FIPS
140-2 compliant.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: add entry for MediaTek Random Number Generator

I work for MediaTek on maintaining the MediaTek RNG driver
for the existing SoCs and adding support for the following
SoCs.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: mtk - add runtime PM support

Add runtime PM support.  There will be the benefit on SoCs where the
clock to the RNG used can be shutdown.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dt-bindings: rng: add MediaTek MT7622 Hardware Random Generator bindings

Document the bindings used by MediaTek MT7622 SoC hardware random number
generator.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - use constant time memory comparison for MACs

Otherwise, we enable all sorts of forgeries via timing attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Stephan Müller <smueller@chronox.de>
Cc: stable@vger.kernel.org
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: crypto4xx - fix an error code

If 'kzalloc' fails, we return 0 which means success.
return -ENOMEM instead as already done a few lines above.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: engine - replace pr_xxx by dev_xxx

By adding a struct device *dev to struct engine, we could store the
device used at register time and so use all dev_xxx functions instead of
pr_xxx.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - use consistent format for errors

Fix inconsistent format and spelling in hash tests error messages.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: brcm - fix spelling mistake: "fallbck" -> "fallback"

Trivial fix to spelling mistake in flow_log message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - fix large block size support

The run-time self-tests fail quite early, as soon as the input block
size is larger than 64 bytes:

  alg: hash: Test 4 failed for sha1-sun4i-ss
  00000000: b9 c9 1e 52 c0 26 d8 39 81 ff f2 3c 99 b1 27 b2
  00000010: 30 d6 c9 85

One thing to notice is the value of the last word, which is the one
expected (it can sometime be the last two words). The datasheet isn't
very clear about when the digest is ready to retrieve and is seems the
bit SS_DATA_END is cleared when the digest was computed *but* that
doesn't mean the digest is ready to retrieve in the registers.

A ndelay(1) is added before reading the computed digest to ensure it is
available in the SS_MD[] registers.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - add the CRYPTO_ALG_KERN_DRIVER_ONLY flag

The CRYPTO_ALG_KERN_DRIVER_ONLY flag is set for hardware accelerated
ciphers accessible through a kernel driver only. This is the case for
ciphers exposed by the sun4i-ss driver. This patch sets this flag.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - move from ablkcipher to skcipher API

Update the sun4i-ss driver to use the skcipher API instead of the old
ablkcipher one. It's a bit more tricky than s/ablkcipher/skcipher/, but
still nothing special and the driver's logic stays the same.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - use GENMASK to generate masks

Use the GENMASK helper instead of custom calculations to generate masks,
It also helps the readability.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - simplify the appended bit assignment

A bit is appended at the end of the input buffer for sha1. Simplify the
code assigning it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - simplify the pad length calculation

When sending the last block of data to the engine, it should be padded
so that the total length of the request can be given to the engine as
the last 2 words of the last 64 bytes block.

Simplify the calculation of this pad offset.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - do not dynamically set parts of the last buffer to 0

Parts of the bf buffer were dynamically set to 0. Change this to set the
whole buffer to 0 by default to avoid any mistake.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - cannot use DMA is the request is 0 length

Do not use DMA is the request is 0 length.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - use lower/upper_32_bits helpers

Replace custom bit shifts and masks with lower/upper_32_bits helpers.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - remove conditional checks against 0

Cosmetic clean up if conditional checks on 0s values.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - group variable definitions in sun4i_hash()

Cosmetic change to avoid having a full screen a variable definitions. It
also helps to see which variables share the same type.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: algapi - Use pr_err common logging style.

Use more common error logging style.

Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: doc - Fixed bugs, added example usage of calc_hash().

- Fixed bugs in example for shash and rng (added missing "*" and " *").
- Corrected pr_info() in calc_hash().
- Added example usage of calc_hash().
- No need for negate PTR_ERR to get error code, as crypto_alloc_rng
  already returns negative values like ERR_PTR(-ENOMEM). Fixed.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: glue_helper - Delete some dead code

We checked (nbytes < bsize) inside the loops so it's not possible to hit
the "goto done;" here.  This code is cut and paste from other slightly
different loops where we don't have the check inside the loop.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aes_ti - fix comment for MixColumns step

mix_columns() contains a comment which shows the matrix used by the
MixColumns step of AES, but the last entry in this matrix was incorrect

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: mediatek - drop .owner field in mtk_crypto_driver

Drop .owner field in mtk_crypto_driver, since platform_driver_register()
will set it automatically.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Add more algorithms

Add more algorithm support for the driver.
Add support for ecb(aes), cfb(aes) and ecb(des3_ede).

Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Remove the individual encrypt/decrypt function for each algorithm

Remove the individual encrypt/decrypt function for easch algorithm.
This is in prepration of adding more crypto algorithms supported by
hardware. While at that simplify create_ctx_hdr/create_input_list
function interfaces.

Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Downgrade the annoying misc interrupt print from dev_err to dev_dbg

Mailbox interrupt is common and it is not an error interrupt.
So downgrade the print from dev_err to  dev_dbg.

Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - return NULL instead of 0

This change is to handle sparse warning. Return type of function is a pointer to the structure and
it returns 0. Instead it should return NULL.

Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Add debugfs entries for CCP information

Expose some data about the configuration and operation of the CCP
through debugfs entries: device name, capabilities, configuration,
statistics.

Allow the user to reset the counters to zero by writing (any value)
to the 'stats' file. This can be done per queue or per device.

Changes from V1:
 - Correct polarity of test when destroying devices at module unload

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD

An updated patch that also handles the additional key length requirements
for the AEAD algorithms.

The max keysize is not 96.  For SHA384/512 it's 128, and for the AEAD
algorithms it's longer still.  Extend the max keysize for the
AEAD size for AES256 + HMAC(SHA512).

Cc: <stable@vger.kernel.org> # 3.6+
Fixes: 357fb60502ede ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms")
Signed-off-by: Martin Hicks <mort@bork.org>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dt-bindings: crypto: remove mediatek ethif clock

This patch removes the parent clock 'ethif' in bindings, since we don't
need to control the parent of a clock in current clock framework.

Moreover, the clocks are get by name in the driver, thus this change
does not break backwards compatibility.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: mediatek - remove redundant clock setting

This patch removes redundant clock setting for 'clk_ethif', which is
the parent of 'clk_cryp'. Hence, we just need to handle its child.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - add genkey kpp test

The test considers a party that already has a private-public
key pair and a party that provides a NULL key. The kernel will
generate the private-public key pair for the latter, computes
the shared secret on both ends and verifies if it's the same.

The explicit private-public key pair was copied from
the previous test vector.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ecdh - add privkey generation support

Add support for generating ecc private keys.

Generation of ecc private keys is helpful in a user-space to kernel
ecdh offload because the keys are not revealed to user-space. Private
key generation is also helpful to implement forward secrecy.

If the user provides a NULL ecc private key, the kernel will generate it
and further use it for ecdh.

Move ecdh's object files below drbg's. drbg must be present in the kernel
at the time of calling.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Register the CNN55XX supported crypto algorithms.

Register the Symmetric crypto algorithms supported by
CNN55XX driver with crypto subsystem.

The following Symmetric crypto algorithms are supported,
  - aes with cbc, ecb, cfb, xts, ctr and cts modes
  - des3_ede with cbc and ecb modes

Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Add debugfs support in CNN55XX driver.

Add debugfs support in CNN55XX Physical Function driver.
Provides hardware counters and firmware information.

Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Add support for CNN55XX adapters.

Add Physical Function driver support for CNN55XX crypto adapters.
CNN55XX adapters belongs to Cavium NITROX family series,
which accelerate both Symmetric and Asymmetric crypto workloads.

These adapters have crypto engines that need firmware
to become operational.

Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

X.509: Fix error code in x509_cert_parse()

We forgot to set the error code on this path so it could result in
returning NULL which leads to a NULL dereference.

Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - Fixes panic in wait_for_completion call

Initialise ctr_completion variable before use.

Signed-off-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: pkcs1pad - comply with crypto_akcipher_maxsize()

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

crypto_akcipher_maxsize() now returns an unsigned int.
Remove the unnecessary check.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - comply with crypto_akcipher_maxsize()

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caampkc - comply with crypto_akcipher_maxsize()

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa - comply with crypto_akcipher_maxsize()

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: akcipher - assume key is already set in maxsize

As of now, crypto_akcipher_maxsize() can not be reached without
successfully setting the key for the transformation. akcipher
algorithm implementations check if the key was set and then return
the output buffer size required for the given key.

Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
akcipher algorithm implementations will remove the check if key is not NULL
and directly return the max size.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - comply with crypto_kpp_maxsize()

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ecdh - comply with crypto_kpp_maxsize()

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

nbytes has no sense now, remove it and directly return the maxsize.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: dh - comply with crypto_kpp_maxsize()

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: kpp - assume key is already set in maxsize

As of now, crypto_kpp_maxsize() can not be reached without successfully
setting the key for the transformation. kpp algorithm implementations
check if the key was set and then return the output buffer size
required for the given key.

Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
kpp algorithm implementations will remove the check if key is not NULL
and directly return the max size.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: dh - fix memleak in setkey

setkey can be called multiple times during the existence
of the transformation object. In case of multiple setkey calls,
the old key was not freed and we leaked memory.
Free the old MPI key if any.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ecc - rename ecdh_make_pub_key()

Rename ecdh_make_pub_key() to ecc_make_pub_key().
ecdh_make_pub_key() is not dh specific and the reference
to dh is wrong.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ecc - remove unnecessary casts

ecc software implementation works with chunks of u64 data. There were some
unnecessary casts to u8 and then back to u64 for the ecc keys. This patch
removes the unnecessary casts.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ecc - remove unused function arguments

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: kpp, (ec)dh - fix typos

While here, add missing argument description (ndigits).

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: add a maintainer for the Inside Secure crypto driver

A new cryptographic engine driver was added in
drivers/crypto/inside-secure. Add myself as a maintainer for this
driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - add SafeXcel EIP197 crypto engine driver

Add support for Inside Secure SafeXcel EIP197 cryptographic engine,
which can be found on Marvell Armada 7k and 8k boards. This driver
currently implements: ecb(aes), cbc(aes), sha1, sha224, sha256 and
hmac(sah1) algorithms.

Two firmwares are needed for this engine to work. Their are mostly used
for more advanced operations than the ones supported (as of now), but we
still need them to pass the data to the internal cryptographic engine.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-sham - force word alignment on the xmit-buf also

This was previously missed from the code, causing SDMA to hang in
some cases where the buffer ended up being not aligned.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-sham - fix closing of hash with separate finalize call

Currently there is an interesting corner case failure with omap-sham
driver, if the finalize call is done separately with no data, but
all previous data has already been processed. In this case, it is not
possible to close the hash with the hardware without providing any data,
so we get incorrect results. Fix this by adjusting the size of data
sent to the hardware crypto engine in case the non-final data size falls
on the block size boundary, by reducing the amount of data sent by one
full block. This makes it sure that we always have some data available
for the finalize call and we can close the hash properly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-sham - buffer handling fixes for hashing later

Currently, the hash later code only handles the cases when we have
either new data coming in with the request or old data in the buffer,
but not the combination when we have both. Fix this by changing the
ordering of the code a bit and handling both cases properly
simultaneously if needed. Also, fix an issue with omap_sham_update
that surfaces with this fix, so that the code checks the bufcnt
instead of total data amount against buffer length to avoid any
buffer overflows.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - Add support for GCM mode

OMAP AES hw supports AES-GCM mode. This patch adds support for GCM and
RFC4106 GCM mode in omap-aes driver. The GCM implementation is mostly
written into its own source file, which gets built into the same driver
binary as the existing AES support.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: forward port to latest upstream kernel, conversion to use
 omap-crypto lib and some additional fixes]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - export some AES driver functionality locally

These are going to be required by the addition of the GCM support.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - move definitions over to a separate header file

Move over most of the omap-aes driver internal definitions to a separate
header file. This is done so that the same definitions can be used in
the upcoming AES-GCM support code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - use base omap crypto support library

Use the SG alignment APIs from the OMAP crypto support library instead
of using own implementations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-des - use base omap crypto support library

Use the SG alignment APIs from the OMAP crypto support library instead
of using own implementations. This reduces the amount of copy-paste
code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap - add base support library for common routines

This contains the generic APIs for aligning SG buffers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-des - use runtime_pm autosuspend for clock handling

Convert the driver to use autosuspend for runtime_pm. This boosts the
performance, and optimizes the power consumption for the driver. By
default, the timeout value for autosuspend is set to one second.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-des - add check for weak keys

OMAP DES crypto accelerator itself is unable to detect weak keys, so
add a specific call to the generic des driver to check the key strength
if requested.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - fix context handling for multiple cores

AES can have multiple HW accelerator cores in the system, in which case
each core has its own crypto engine in use. Currently, the used hardware
device is stored under the omap_aes_ctx struct, which is global for
the algorithm itself, causing conflicts when used with multiple cores.
Fix this by moving the used HW device under reqctx, which is stored
per-request basis.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-aes - drop unused flags attribute from omap_aes_ctx

This is not used for anything, so drop it.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rng - Remove unused function __crypto_rng_cast()

This fixes the following warning when building with clang:

crypto/rng.c:35:34: error: unused function '__crypto_rng_cast'
    [-Werror,-Wunused-function]

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hw_random: timeriomem_rng: Allow setting RNG quality from platform data

When a hw_random device's quality is non-zero, it will automatically be
used to fill the kernel's entropy pool.  Since timeriomem_rng is used by
many different devices, the quality needs to be provided by platform
data or device tree.

Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dt-bindings: timeriomem_rng: Add entropy quality property

Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm/crc32 - enable module autoloading based on CPU feature bits

Make the module autoloadable by tying it to the CPU feature bits that
describe whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm/sha2-ce - enable module autoloading based on CPU feature bits

Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm/sha1-ce - enable module autoloading based on CPU feature bits

Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm/ghash-ce - enable module autoloading based on CPU feature bits

Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm/aes-ce - enable module autoloading based on CPU feature bits

Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: mediatek - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: omap-sham - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: mv_cesa - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: marvell - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ixp4xx - Use IPAD/OPAD constant

This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>