ath10k: start recovery process when payload length exceeds max htc length for sdio

[ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ]

When simulate random transfer fail for sdio write and read, it happened
"payload length exceeds max htc length" and recovery later sometimes.

Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y

2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues

3. It happened payload length exceeds max htc length.
[  199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[  264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088

4. after some time, such as 60 seconds, it start recovery which triggered
by wmi command timeout for periodic scan.
[  269.229232] ieee80211 phy0: Hardware restart was requested
[  269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered

The simulate fail of sdio is not a real sdio transter fail, it only
set an error status in mmc_should_fail_request after the transfer end,
actually the transfer is success, then sdio_io_rw_ext_helper will
return error status and stop transfer the left data. For example,
the really RX len is 286 bytes, then it will split to 2 blocks in
sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the
first 256 bytes get an error status by mmc_should_fail_request,then
the left 30 bytes will not read in this RX operation. Then when the
next RX arrive, the left 30 bytes will be considered as the header
of the read, the top 4 bytes of the 30 bytes will be considered as
lookaheads, but actually the 4 bytes is not the lookaheads, so the len
from this lookaheads is not correct, it exceeds max htc length 4088
sometimes. When happened exceeds, the buffer chain is not matched between
firmware and ath10k, then it need to start recovery ASAP. Recently then
recovery will be started by wmi command timeout, but it will be long time
later, for example, it is 60+ seconds later from the periodic scan, if
it does not have periodic scan, it will be longer.

Start recovery when it happened "payload length exceeds max htc length"
will be reasonable.

This patch only effect sdio chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: pvr2fb: initialize variables

[ Upstream commit 8e1ba47c60bcd325fdd097cd76054639155e5d2e ]

clang static analysis reports this repesentative error

pvr2fb.c:1049:2: warning: 1st function call argument
  is an uninitialized value [core.CallAndMessage]
        if (*cable_arg)
        ^~~~~~~~~~~~~~~

Problem is that cable_arg depends on the input loop to
set the cable_arg[0].  If it does not, then some random
value from the stack is used.

A similar problem exists for output_arg.

So initialize cable_arg and output_arg.

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix realtime bitmap/summary file truncation when growing rt volume

[ Upstream commit f4c32e87de7d66074d5612567c5eac7325024428 ]

The realtime bitmap and summary files are regular files that are hidden
away from the directory tree.  Since they're regular files, inode
inactivation will try to purge what it thinks are speculative
preallocations beyond the incore size of the file.  Unfortunately,
xfs_growfs_rt forgets to update the incore size when it resizes the
inodes, with the result that inactivating the rt inodes at unmount time
will cause their contents to be truncated.

Fix this by updating the incore size when we change the ondisk size as
part of updating the superblock.  Note that we don't do this when we're
allocating blocks to the rt inodes because we actually want those blocks
to get purged if the growfs fails.

This fixes corruption complaints from the online rtsummary checker when
running xfs/233.  Since that test requires rmap, one can also trigger
this by growing an rt volume, cycling the mount, and creating rt files.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

[ Upstream commit 22c9e58299e5f18274788ce54c03d4fb761e3c5d ]

This is commit fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact
watchpoint addresses") but ported to arm32, which has the same
problem.

This problem was found by Android CTS tests, notably the
"watchpoint_imprecise" test [1].  I tested locally against a copycat
(simplified) version of the test though.

[1] https://android.googlesource.com/platform/bionic/+/master/tests/sys_ptrace_test.cpp

Link: https://lkml.kernel.org/r/20191019111216.1.I82eae759ca6dc28a245b043f485ca490e3015321@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: change sigio_spinlock to a mutex

[ Upstream commit f2d05059e15af3f70502074f4e3a504530af504a ]

Lockdep complains at boot:

=============================
[ BUG: Invalid wait context ]
5.7.0-05093-g46d91ecd597b #98 Not tainted
-----------------------------
swapper/1 is trying to lock:
0000000060931b98 (&desc[i].request_mutex){+.+.}-{3:3}, at: __setup_irq+0x11d/0x623
other info that might help us debug this:
context-{4:4}
1 lock held by swapper/1:
 #0: 000000006074fed8 (sigio_spinlock){+.+.}-{2:2}, at: sigio_lock+0x1a/0x1c
stack backtrace:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0-05093-g46d91ecd597b #98
Stack:
 7fa4fab0 6028dfd1 0000002a 6008bea5
 7fa50700 7fa50040 7fa4fac0 6028e016
 7fa4fb50 6007f6da 60959c18 00000000
Call Trace:
 [<60023a0e>] show_stack+0x13b/0x155
 [<6028e016>] dump_stack+0x2a/0x2c
 [<6007f6da>] __lock_acquire+0x515/0x15f2
 [<6007eb50>] lock_acquire+0x245/0x273
 [<6050d9f1>] __mutex_lock+0xbd/0x325
 [<6050dc76>] mutex_lock_nested+0x1d/0x1f
 [<6008e27e>] __setup_irq+0x11d/0x623
 [<6008e8ed>] request_threaded_irq+0x169/0x1a6
 [<60021eb0>] um_request_irq+0x1ee/0x24b
 [<600234ee>] write_sigio_irq+0x3b/0x76
 [<600383ca>] sigio_broken+0x146/0x2e4
 [<60020bd8>] do_one_initcall+0xde/0x281

Because we hold sigio_spinlock and then get into requesting
an interrupt with a mutex.

Change the spinlock to a mutex to avoid that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to check segment boundary during SIT page readahead

[ Upstream commit 6a257471fa42c8c9c04a875cd3a2a22db148e0f0 ]

As syzbot reported:

kernel BUG at fs/f2fs/segment.h:657!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 16220 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:f2fs_ra_meta_pages+0xa51/0xdc0 fs/f2fs/segment.h:657
Call Trace:
 build_sit_entries fs/f2fs/segment.c:4195 [inline]
 f2fs_build_segment_manager+0x4b8a/0xa3c0 fs/f2fs/segment.c:4779
 f2fs_fill_super+0x377d/0x6b80 fs/f2fs/super.c:3633
 mount_bdev+0x32e/0x3f0 fs/super.c:1417
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
 do_new_mount fs/namespace.c:2875 [inline]
 path_mount+0x1387/0x2070 fs/namespace.c:3192
 do_mount fs/namespace.c:3205 [inline]
 __do_sys_mount fs/namespace.c:3413 [inline]
 __se_sys_mount fs/namespace.c:3390 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

@blkno in f2fs_ra_meta_pages could exceed max segment count, causing panic
in following sanity check in current_sit_addr(), add check condition to
avoid this issue.

Reported-by: syzbot+3698081bcf0bb2d12174@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: add trace exit in exception path

[ Upstream commit 9b66482282888d02832b7d90239e1cdb18e4b431 ]

Missing the trace exit in f2fs_sync_dirty_inodes

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc64: remove mm_cpumask clearing to fix kthread_use_mm race

[ Upstream commit bafb056ce27940c9994ea905336aa8f27b4f7275 ]

The de facto (and apparently uncommented) standard for using an mm had,
thanks to this code in sparc if nothing else, been that you must have a
reference on mm_users *and that reference must have been obtained with
mmget()*, i.e., from a thread with a reference to mm_users that had used
the mm.

The introduction of mmget_not_zero() in commit d2005e3f41d4
("userfaultfd: don't pin the user memory in userfaultfd_file_create()")
allowed mm_count holders to aoperate on user mappings asynchronously
from the actual threads using the mm, but they were not to load those
mappings into their TLB (i.e., walking vmas and page tables is okay,
kthread_use_mm() is not).

io_uring 2b188cc1bb857 ("Add io_uring IO interface") added code which
does a kthread_use_mm() from a mmget_not_zero() refcount.

The problem with this is code which previously assumed mm == current->mm
and mm->mm_users == 1 implies the mm will remain single-threaded at
least until this thread creates another mm_users reference, has now
broken.

arch/sparc/kernel/smp_64.c:

    if (atomic_read(&mm->mm_users) == 1) {
        cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
        goto local_flush_and_out;
    }

vs fs/io_uring.c

    if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL) ||
                 !mmget_not_zero(ctx->sqo_mm)))
        return -EFAULT;
    kthread_use_mm(ctx->sqo_mm);

mmget_not_zero() could come in right after the mm_users == 1 test, then
kthread_use_mm() which sets its CPU in the mm_cpumask. That update could
be lost if cpumask_copy() occurs afterward.

I propose we fix this by allowing mmget_not_zero() to be a first-class
reference, and not have this obscure undocumented and unchecked
restriction.

The basic fix for sparc64 is to remove its mm_cpumask clearing code. The
optimisation could be effectively restored by sending IPIs to mm_cpumask
members and having them remove themselves from mm_cpumask. This is more
tricky so I leave it as an exercise for someone with a sparc64 SMP.
powerpc has a (currently similarly broken) example.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: select ARCH_WANT_IRQS_OFF_ACTIVATE_MM

[ Upstream commit 66acd46080bd9e5ad2be4b0eb1d498d5145d058e ]

powerpc uses IPIs in some situations to switch a kernel thread away
from a lazy tlb mm, which is subject to the TLB flushing race
described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-3-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/smp: Fix spurious DBG() warning

[ Upstream commit f6bac19cf65c5be21d14a0c9684c8f560f2096dd ]

When building with W=1 we get the following warning:

 arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
 arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
  empty body in an ‘if’ statement [-Werror=empty-body]
   276 |      cpu, srr1);
       |                ^
 cc1: all warnings being treated as errors

The full context is this block:

 if (srr1 && !generic_check_cpu_restart(cpu))
  DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
  cpu, srr1);

When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

futex: Fix incorrect should_fail_futex() handling

[ Upstream commit 921c7ebd1337d1a46783d7e15a850e12aed2eaa0 ]

If should_futex_fail() returns true in futex_wake_pi(), then the 'ret'
variable is set to -EFAULT and then immediately overwritten. So the failure
injection is non-functional.

Fix it by actually leaving the function and returning -EFAULT.

The Fixes tag is kinda blury because the initial commit which introduced
failure injection was already sloppy, but the below mentioned commit broke
it completely.

[ tglx: Massaged changelog ]

Fixes: 6b4f4bc9cb22 ("locking/futex: Allow low-level atomic operations to return -EAGAIN")
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200927000858.24219-1-mateusznosek0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()

[ Upstream commit 0daf2bf5a2dcf33d446b76360908f109816e2e21 ]

Each EMAD transaction stores the skb used to issue the EMAD request
('trans->tx_skb') so that the request could be retried in case of a
timeout. The skb can be freed when a corresponding response is received
or as part of the retry logic (e.g., failed retransmit, exceeded maximum
number of retries).

The two tasks (i.e., response processing and retransmits) are
synchronized by the atomic 'trans->active' field which ensures that
responses to inactive transactions are ignored.

In case of a failed retransmit the transaction is finished and all of
its resources are freed. However, the current code does not mark it as
inactive. Syzkaller was able to hit a race condition in which a
concurrent response is processed while the transaction's resources are
being freed, resulting in a use-after-free [1].

Fix the issue by making sure to mark the transaction as inactive after a
failed retransmit and free its resources only if a concurrent task did
not already do that.

[1]
BUG: KASAN: use-after-free in consume_skb+0x30/0x370
net/core/skbuff.c:833
Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004

CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250
mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 check_memory_region_inline mm/kasan/generic.c:186 [inline]
 check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192
 instrument_atomic_read include/linux/instrumented.h:56 [inline]
 atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
 refcount_read include/linux/refcount.h:147 [inline]
 skb_unref include/linux/skbuff.h:1044 [inline]
 consume_skb+0x30/0x370 net/core/skbuff.c:833
 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline]
 mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672
 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063
 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
 mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
 __do_softirq+0x223/0x964 kernel/softirq.c:292
 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711

Allocated by task 1006:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 slab_post_alloc_hook mm/slab.h:586 [inline]
 slab_alloc_node mm/slub.c:2824 [inline]
 slab_alloc mm/slub.c:2832 [inline]
 kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837
 __build_skb+0x21/0x60 net/core/skbuff.c:311
 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464
 netdev_alloc_skb include/linux/skbuff.h:2810 [inline]
 mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline]
 mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline]
 mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817
 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831
 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline]
 mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365
 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037
 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765
 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:714 [inline]
 genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:671
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359
 ___sys_sendmsg+0xff/0x170 net/socket.c:2413
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 73:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kmem_cache_free+0xbe/0x380 mm/slub.c:3088
 kfree_skbmem net/core/skbuff.c:622 [inline]
 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616
 __kfree_skb net/core/skbuff.c:679 [inline]
 consume_skb net/core/skbuff.c:837 [inline]
 consume_skb+0xe1/0x370 net/core/skbuff.c:831
 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613
 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff88804f5703c0
 which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 212 bytes inside of
 224-byte region [ffff88804f5703c0, ffff88804f5704a0)
The buggy address belongs to the page:
page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0
flags: 0x100000000000200(slab)
raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
                         ^
 ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels

[ Upstream commit f2ac57a4c49d40409c21c82d23b5706df9b438af ]

GCC 10 optimizes the scheduler code differently than its predecessors.

When CONFIG_DEBUG_SECTION_MISMATCH=y, the Makefile forces GCC not
to inline some functions (-fno-inline-functions-called-once). Before GCC
10, "no-inlined" __schedule() starts with the usual prologue:

  push %bp
  mov %sp, %bp

So the ORC unwinder simply picks stack pointer from %bp and
unwinds from __schedule() just perfectly:

  $ cat /proc/1/stack
  [<0>] ep_poll+0x3e9/0x450
  [<0>] do_epoll_wait+0xaa/0xc0
  [<0>] __x64_sys_epoll_wait+0x1a/0x20
  [<0>] do_syscall_64+0x33/0x40
  [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

But now, with GCC 10, there is no %bp prologue in __schedule():

  $ cat /proc/1/stack
  <nothing>

The ORC entry of the point in __schedule() is:

  sp:sp+88 bp:last_sp-48 type:call end:0

In this case, nobody subtracts sizeof "struct inactive_task_frame" in
__unwind_start(). The struct is put on the stack by __switch_to_asm() and
only then __switch_to_asm() stores %sp to task->thread.sp. But we start
unwinding from a point in __schedule() (stored in frame->ret_addr by
'call') and not in __switch_to_asm().

So for these example values in __unwind_start():

  sp=ffff94b50001fdc8 bp=ffff8e1f41d29340 ip=__schedule+0x1f0

The stack is:

  ffff94b50001fdc8: ffff8e1f41578000 # struct inactive_task_frame
  ffff94b50001fdd0: 0000000000000000
  ffff94b50001fdd8: ffff8e1f41d29340
  ffff94b50001fde0: ffff8e1f41611d40 # ...
  ffff94b50001fde8: ffffffff93c41920 # bx
  ffff94b50001fdf0: ffff8e1f41d29340 # bp
  ffff94b50001fdf8: ffffffff9376cad0 # ret_addr (and end of the struct)

0xffffffff9376cad0 is __schedule+0x1f0 (after the call to
__switch_to_asm).  Now follow those 88 bytes from the ORC entry (sp+88).
The entry is correct, __schedule() really pushes 48 bytes (8*7) + 32 bytes
via subq to store some local values (like 4U below). So to unwind, look
at the offset 88-sizeof(long) = 0x50 from here:

  ffff94b50001fe00: ffff8e1f41578618
  ffff94b50001fe08: 00000cc000000255
  ffff94b50001fe10: 0000000500000004
  ffff94b50001fe18: 7793fab6956b2d00 # NOTE (see below)
  ffff94b50001fe20: ffff8e1f41578000
  ffff94b50001fe28: ffff8e1f41578000
  ffff94b50001fe30: ffff8e1f41578000
  ffff94b50001fe38: ffff8e1f41578000
  ffff94b50001fe40: ffff94b50001fed8
  ffff94b50001fe48: ffff8e1f41577ff0
  ffff94b50001fe50: ffffffff9376cf12

Here                ^^^^^^^^^^^^^^^^ is the correct ret addr from
__schedule(). It translates to schedule+0x42 (insn after a call to
__schedule()).

BUT, unwind_next_frame() tries to take the address starting from
0xffff94b50001fdc8. That is exactly from thread.sp+88-sizeof(long) =
0xffff94b50001fdc8+88-8 = 0xffff94b50001fe18, which is garbage marked as
NOTE above. So this quits the unwinding as 7793fab6956b2d00 is obviously
not a kernel address.

There was a fix to skip 'struct inactive_task_frame' in
unwind_get_return_address_ptr in the following commit:

  187b96db5ca7 ("x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks")

But we need to skip the struct already in the unwinder proper. So
subtract the size (increase the stack pointer) of the structure in
__unwind_start() directly. This allows for removal of the code added by
commit 187b96db5ca7 completely, as the address is now at
'(unsigned long *)state->sp - 1', the same as in the generic case.

[ mingo: Cleaned up the changelog a bit, for better readability. ]

Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Bug: https://bugzilla.suse.com/show_bug.cgi?id=1176907
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014053051.24199-1-jslaby@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

fscrypt: return -EXDEV for incompatible rename or link into encrypted dir

commit f5e55e777cc93eae1416f0fa4908e8846b6d7825 upstream.

Currently, trying to rename or link a regular file, directory, or
symlink into an encrypted directory fails with EPERM when the source
file is unencrypted or is encrypted with a different encryption policy,
and is on the same mountpoint.  It is correct for the operation to fail,
but the choice of EPERM breaks tools like 'mv' that know to copy rather
than rename if they see EXDEV, but don't know what to do with EPERM.

Our original motivation for EPERM was to encourage users to securely
handle their data.  Encrypting files by "moving" them into an encrypted
directory can be insecure because the unencrypted data may remain in
free space on disk, where it can later be recovered by an attacker.
It's much better to encrypt the data from the start, or at least try to
securely delete the source data e.g. using the 'shred' program.

However, the current behavior hasn't been effective at achieving its
goal because users tend to be confused, hack around it, and complain;
see e.g. https://github.com/google/fscrypt/issues/76.  And in some cases
it's actually inconsistent or unnecessary.  For example, 'mv'-ing files
between differently encrypted directories doesn't work even in cases
where it can be secure, such as when in userspace the same passphrase
protects both directories.  Yet, you *can* already 'mv' unencrypted
files into an encrypted directory if the source files are on a different
mountpoint, even though doing so is often insecure.

There are probably better ways to teach users to securely handle their
files.  For example, the 'fscrypt' userspace tool could provide a
command that migrates unencrypted files into an encrypted directory,
acting like 'shred' on the source files and providing appropriate
warnings depending on the type of the source filesystem and disk.

Receiving errors on unimportant files might also force some users to
disable encryption, thus making the behavior counterproductive.  It's
desirable to make encryption as unobtrusive as possible.

Therefore, change the error code from EPERM to EXDEV so that tools
looking for EXDEV will fall back to a copy.

This, of course, doesn't prevent users from still doing the right things
to securely manage their files.  Note that this also matches the
behavior when a file is renamed between two project quota hierarchies;
so there's precedent for using EXDEV for things other than mountpoints.

xfstests generic/398 will require an update with this change.

[Rewritten from an earlier patch series by Michael Halcrow.]

Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Joe Richey <joerichey@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: sata_rcar: Fix DMA boundary mask

commit df9c590986fdb6db9d5636d6cd93bc919c01b451 upstream.

Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
dma_parms for platform devices"), the R-Car SATA device didn't have DMA
parameters.  Hence the DMA boundary mask supplied by its driver was
silently ignored, as __scsi_init_queue() doesn't check the return value
of dma_set_seg_boundary(), and the default value of 0xffffffff was used.

Now the device has gained DMA parameters, the driver-supplied value is
used, and the following warning is printed on Salvator-XS:

    DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
    WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300

(the range of start/end values depend on whether IOMMU support is
 enabled or not)

The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
any typical end value, which is odd, will trigger the check.

Fix this by increasing the DMA boundary value by 1.

This also fixes the following WRITE DMA EXT timeout issue:

    # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
    ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata1.00: failed command: WRITE DMA EXT
    ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata1.00: status: { DRDY }

as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
splitting segments on boundary masks").

Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: lpddr: Fix bad logic in print_drs_error

commit 1c9c02bb22684f6949d2e7ddc0a3ff364fd5a6fc upstream.

Update logic for broken test. Use a more common logging style.

It appears the logic in this function is broken for the
consecutive tests of

        if (prog_status & 0x3)
                ...
        else if (prog_status & 0x2)
                ...
        else (prog_status & 0x1)
                ...

Likely the first test should be

        if ((prog_status & 0x3) == 0x3)

Found by inspection of include files using printk.

Fixes: eb3db27507f7 ("[MTD] LPDDR PFOW definition")
Cc: stable@vger.kernel.org
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

p54: avoid accessing the data mapped to streaming DMA

commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream.

In p54p_tx(), skb->data is mapped to streaming DMA on line 337:
  mapping = pci_map_single(..., skb->data, ...);

Then skb->data is accessed on line 349:
  desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;

This access may cause data inconsistency between CPU cache and hardware.

To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in
a local variable before DMA mapping, and then the driver accesses this
local variable instead of skb->data.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix page dereference after free

commit d78092e4937de9ce55edcb4ee4c5e3c707be0190 upstream.

After unlock_request() pages from the ap->pages[] array may be put (e.g. by
aborting the connection) and the pages can be freed.

Prevent use after free by grabbing a reference to the page before calling
unlock_request().

The original patch was created by Pradeep P V K.

Reported-by: Pradeep P V K <ppvk@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: disable Firmware First mode for correctable memory errors

commit d759af38572f97321112a0852353613d18126038 upstream.

When running as Xen dom0 the kernel isn't responsible for selecting the
error handling mode, this should be handled by the hypervisor.

So disable setting FF mode when running as Xen pv guest. Not doing so
might result in boot splats like:

[    7.509696] HEST: Enabling Firmware First mode for corrected errors.
[    7.510382] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 2.
[    7.510383] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 3.
[    7.510384] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 4.
[    7.510384] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 5.
[    7.510385] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 6.
[    7.510386] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 7.
[    7.510386] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 8.

Reason is that the HEST ACPI table contains the real number of MCA
banks, while the hypervisor is emulating only 2 banks for guests.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200925140751.31381-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/x86/amd/ibs: Fix re-arming IBS Fetch

commit 221bfce5ebbdf72ff08b3bf2510ae81058ee568b upstream.

Stephane Eranian found a bug in that IBS' current Fetch counter was not
being reset when the driver would write the new value to clear it along
with the enable bit set, and found that adding an MSR write that would
first disable IBS Fetch would make IBS Fetch reset its current count.

Indeed, the PPR for AMD Family 17h Model 31h B0 55803 Rev 0.54 - Sep 12,
2019 states "The periodic fetch counter is set to IbsFetchCnt [...] when
IbsFetchEn is changed from 0 to 1."

Explicitly set IbsFetchEn to 0 and then to 1 when re-enabling IBS Fetch,
so the driver properly resets the internal counter to 0 and IBS
Fetch starts counting again.

A family 15h machine tested does not have this problem, and the extra
wrmsr is also not needed on Family 19h, so only do the extra wrmsr on
families 16h through 18h.

Reported-by: Stephane Eranian <stephane.eranian@google.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
[peterz: optimized]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix memory leak caused by tipc_buf_append()

[ Upstream commit ceb1eb2fb609c88363e06618b8d4bbf7815a4e03 ]

Commit ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
replaced skb_unshare() with skb_copy() to not reduce the data reference
counter of the original skb intentionally. This is not the correct
way to handle the cloned skb because it causes memory leak in 2
following cases:
 1/ Sending multicast messages via broadcast link
  The original skb list is cloned to the local skb list for local
  destination. After that, the data reference counter of each skb
  in the original list has the value of 2. This causes each skb not
  to be freed after receiving ACK:
  tipc_link_advance_transmq()
  {
   ...
   /* release skb */
   __skb_unlink(skb, &l->transmq);
   kfree_skb(skb); <-- memory exists after being freed
  }

 2/ Sending multicast messages via replicast link
  Similar to the above case, each skb cannot be freed after purging
  the skb list:
  tipc_mcast_xmit()
  {
   ...
   __skb_queue_purge(pkts); <-- memory exists after being freed
  }

This commit fixes this issue by using skb_unshare() instead. Besides,
to avoid use-after-free error reported by KASAN, the pointer to the
fragment is set to NULL before calling skb_unshare() to make sure that
the original skb is not freed after freeing the fragment 2 times in
case skb_unshare() returns NULL.

Fixes: ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Reported-by: Thang Hoang Ngo <thang.h.ngo@dektech.com.au>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: Fix bit fields checking in ravb_hwtstamp_get()

[ Upstream commit 68b9f0865b1ef545da180c57d54b82c94cb464a4 ]

In the function ravb_hwtstamp_get() in ravb_main.c with the existing
values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL
(0x6)

if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT)
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL)
config.rx_filter = HWTSTAMP_FILTER_ALL;

if the test on RAVB_RXTSTAMP_TYPE_ALL should be true,
it will never be reached.

This issue can be verified with 'hwtstamp_config' testing program
(tools/testing/selftests/net/hwtstamp_config.c). Setting filter type
to ALL and subsequent retrieving it gives incorrect value:

$ hwtstamp_config eth0 OFF ALL
flags = 0
tx_type = OFF
rx_filter = ALL
$ hwtstamp_config eth0
flags = 0
tx_type = OFF
rx_filter = PTP_V2_L2_EVENT

Correct this by converting if-else's to switch.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: fix an use-before-init in gtp_newlink()

[ Upstream commit 51467431200b91682b89d31317e35dcbca1469ce ]

*_pdp_find() from gtp_encap_recv() would trigger a crash when a peer
sends GTP packets while creating new GTP device.

RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp]
<SNIP>
Call Trace:
 <IRQ>
 gtp_encap_recv+0xc2/0x2e0 [gtp]
 ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp]
 udp_queue_rcv_one_skb+0x1fe/0x530
 udp_queue_rcv_skb+0x40/0x1b0
 udp_unicast_rcv_skb.isra.0+0x78/0x90
 __udp4_lib_rcv+0x5af/0xc70
 udp_rcv+0x1a/0x20
 ip_protocol_deliver_rcu+0xc5/0x1b0
 ip_local_deliver_finish+0x48/0x50
 ip_local_deliver+0xe5/0xf0
 ? ip_protocol_deliver_rcu+0x1b0/0x1b0

gtp_encap_enable() should be called after gtp_hastable_new() otherwise
*_pdp_find() will access the uninitialized hash table.

Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com>
Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efivarfs: Replace invalid slashes with exclamation marks in dentries.

commit 336af6a4686d885a067ecea8c3c3dd129ba4fc75 upstream.

Without this patch efivarfs_alloc_dentry creates dentries with slashes in
their name if the respective EFI variable has slashes in its name. This in
turn causes EIO on getdents64, which prevents a complete directory listing
of /sys/firmware/efi/efivars/.

This patch replaces the invalid shlashes with exclamation marks like
kobject_set_name_vargs does for /sys/firmware/efi/vars/ to have consistently
named dentries under /sys/firmware/efi/vars/ and /sys/firmware/efi/efivars/.

Signed-off-by: Michael Schaller <misch@google.com>
Link: https://lore.kernel.org/r/20200925074502.150448-1-misch@google.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: link with -z norelro regardless of CONFIG_RELOCATABLE

commit 3b92fa7485eba16b05166fddf38ab42f2ff6ab95 upstream.

With CONFIG_EXPERT=y, CONFIG_KASAN=y, CONFIG_RANDOMIZE_BASE=n,
CONFIG_RELOCATABLE=n, we observe the following failure when trying to
link the kernel image with LD=ld.lld:

error: section: .exit.data is not contiguous with other relro sections

ld.lld defaults to -z relro while ld.bfd defaults to -z norelro. This
was previously fixed, but only for CONFIG_RELOCATABLE=y.

Fixes: 3bbd3db86470 ("arm64: relocatable: fix inconsistencies in linker script and options")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201016175339.2429280-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/setlocalversion: make git describe output more reliable

commit 548b8b5168c90c42e88f70fcf041b4ce0b8e7aa8 upstream.

When building for an embedded target using Yocto, we're sometimes
observing that the version string that gets built into vmlinux (and
thus what uname -a reports) differs from the path under /lib/modules/
where modules get installed in the rootfs, but only in the length of
the -gabc123def suffix. Hence modprobe always fails.

The problem is that Yocto has the concept of "sstate" (shared state),
which allows different developers/buildbots/etc. to share build
artifacts, based on a hash of all the metadata that went into building
that artifact - and that metadata includes all dependencies (e.g. the
compiler used etc.). That normally works quite well; usually a clean
build (without using any sstate cache) done by one developer ends up
being binary identical to a build done on another host. However, one
thing that can cause two developers to end up with different builds
[and thus make one's vmlinux package incompatible with the other's
kernel-dev package], which is not captured by the metadata hashing, is
this `git describe`: The output of that can be affected by

(1) git version: before 2.11 git defaulted to a minimum of 7, since
2.11 (git.git commit e6c587) the default is dynamic based on the
number of objects in the repo
(2) hence even if both run the same git version, the output can differ
based on how many remotes are being tracked (or just lots of local
development branches or plain old garbage)
(3) and of course somebody could have a core.abbrev config setting in
~/.gitconfig

So in order to avoid `uname -a` output relying on such random details
of the build environment which are rather hard to ensure are
consistent between developers and buildbots, make sure the abbreviated
sha1 always consists of exactly 12 hex characters. That is consistent
with the current rule for -stable patches, and is almost always enough
to identify the head commit unambigously - in the few cases where it
does not, the v5.4.3-00021- prefix would certainly nail it down.

[Adapt to `` vs $() differences between 5.4 and upstream.]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.203

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201027134909.701581493@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/opal-dump : Use IRQ_HANDLED instead of numbers in interrupt handler

[ Upstream commit b29336c0e1785a28bc40a9fd47c2321671e9792e ]

Fixes: 8034f715f ("powernv/opal-dump: Convert to irq domain")

Converts all the return explicit number to a more proper IRQ_HANDLED,
which looks proper incase of interrupt handler returning case.

Here, It also removes error message like "nobody cared" which was
getting unveiled while returning -1 or 0 from handler.

Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.

[ Upstream commit 7974ecd7d3c0f42a98566f281e44ea8573a2ad88 ]

Currently, enabling f_ncm at SuperSpeed Plus speeds results in an
oops in config_ep_by_speed because ncm_set_alt passes in NULL
ssp_descriptors. Fix this by re-using the SuperSpeed descriptors.
This is safe because usb_assign_descriptors calls
usb_copy_descriptors.

Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: at25: set minimum read/write access stride to 1

commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream.

SPI eeproms are addressed by byte.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728092959.24600-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.

syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.

  Since multiple threads can concurrently call wdm_write()/wdm_flush(),
  we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
  make sure that all waiters are woken up. Also, error reporting needs
  to use fetch-and-clear approach in order not to report same error for
  multiple times.

  Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
  check WDM_DISCONNECTING.

  In wdm_flush(), since locks are not held, it is not safe to dereference
  desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
  remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp
[3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp
[4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu
[5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp

Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-acm: add quirk to blacklist ETAS ES58X devices

commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream.

The ES58X devices has a CDC ACM interface (used for debug
purpose). During probing, the device is thus recognized as USB Modem
(CDC ACM), preventing the etas-es58x module to load:
  usbcore: registered new interface driver etas_es58x
  usb 1-1.1: new full-speed USB device number 14 using xhci_hcd
  usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00
  usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  usb 1-1.1: Product: ES581.4
  usb 1-1.1: Manufacturer: ETAS GmbH
  usb 1-1.1: SerialNumber: 2204355
  cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device
  cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device

Thus, these have been added to the ignore list in
drivers/usb/class/cdc-acm.c

N.B. Future firmware release of the ES58X will remove the CDC-ACM
interface.

`lsusb -v` of the three devices variant (ES581.4, ES582.1 and
ES584.1):

  Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               1.10
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0159
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES581.4
    iSerial                 3 2204355
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0035
      bNumInterfaces          1
      bConfigurationValue     1
      iConfiguration          5 Bus Powered Configuration
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              100mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           3
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      0
        iInterface              4 ACM Control Interface
        CDC Header:
          bcdCDC               1.10
        CDC Call Management:
          bmCapabilities       0x01
            call management
          bDataInterface          0
        CDC ACM:
          bmCapabilities       0x06
            sends break
            line coding and serial state
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0010  1x 16 bytes
          bInterval              10
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x82  EP 2 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x03  EP 3 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
  Device Status:     0x0000
    (Bus Powered)

  Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0168
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES582
    iSerial                 3 0108933
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0043
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      1 AT-commands (v.25ter)
        iInterface              0
        CDC Header:
          bcdCDC               1.10
        CDC ACM:
          bmCapabilities       0x02
            line coding and serial state
        CDC Union:
          bMasterInterface        0
          bSlaveInterface         1
        CDC Call Management:
          bmCapabilities       0x03
            call management
            use DataInterface
          bDataInterface          1
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x83  EP 3 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval              16
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
  Device Qualifier (for other device speed):
    bLength                10
    bDescriptorType         6
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    bNumConfigurations      1
  Device Status:     0x0000
    (Bus Powered)

  Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0169
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES584.1
    iSerial                 3 0100320
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0043
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      1 AT-commands (v.25ter)
        iInterface              0
        CDC Header:
          bcdCDC               1.10
        CDC ACM:
          bmCapabilities       0x02
            line coding and serial state
        CDC Union:
          bMasterInterface        0
          bSlaveInterface         1
        CDC Call Management:
          bmCapabilities       0x03
            call management
            use DataInterface
          bDataInterface          1
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x83  EP 3 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval              16
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
  Device Qualifier (for other device speed):
    bLength                10
    bDescriptorType         6
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    bNumConfigurations      1
  Device Status:     0x0000
    (Bus Powered)

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: fsl_lpuart: fix lpuart32_poll_get_char

commit 29788ab1d2bf26c130de8f44f9553ee78a27e8d5 upstream.

The watermark is set to 1, so we need to input two chars to trigger RDRF
using the original logic. With the new logic, we could always get the
char when there is data in FIFO.

Suggested-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200929095509.21680-1-peng.fan@nxp.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: korina: cast KSEG0 address to pointer in kfree

[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ]

Fixes gcc warning:

passing argument 1 of 'kfree' makes pointer from integer without a cast

Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()

[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ]

The idx in __ath10k_htt_rx_ring_fill_n function lives in
consistent dma region writable by the device. Malfunctional
or malicious device could manipulate such idx to have a OOB
write. Either by
    htt->rx_ring.netbufs_ring[idx] = skb;
or by
    ath10k_htt_set_paddrs_ring(htt, paddr, idx);

The idx can also be negative as it's signed, giving a large
memory space to write to.

It's possibly exploitable by corruptting a legit pointer with
a skb pointer. And then fill skb with payload as rougue object.

Part of the log here. Sometimes it appears as UAF when writing
to a freed memory by chance.

 [   15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0
 [   15.595483] #PF: supervisor write access in kernel mode
 [   15.596250] #PF: error_code(0x0002) - not-present page
 [   15.597013] PGD 0 P4D 0
 [   15.597395] Oops: 0002 [#1] SMP KASAN PTI
 [   15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69
 [   15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
 BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 [   15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
 [   15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n
 (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()

[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ]

If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from
ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync()
and ufshcd_hold() will cause a race condition. Fix this by removing the
unnecessary calls of pm_runtime_get_sync() and ufshcd_hold().

Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: core: Solve race condition in anchor cleanup functions

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]

usb_kill_anchored_urbs() is commonly used to cancel all URBs on an
anchor just before releasing resources which the URBs rely on. By doing
so, users of this function rely on that no completer callbacks will take
place from any URB on the anchor after it returns.

However if this function is called in parallel with __usb_hcd_giveback_urb
processing a URB on the anchor, the latter may call the completer
callback after usb_kill_anchored_urbs() returns. This can lead to a
kernel panic due to use after release of memory in interrupt context.

The race condition is that __usb_hcd_giveback_urb() first unanchors the URB
and then makes the completer callback. Such URB is hence invisible to
usb_kill_anchored_urbs(), allowing it to return before the completer has
been called, since the anchor's urb_list is empty.

Even worse, if the racing completer callback resubmits the URB, it may
remain in the system long after usb_kill_anchored_urbs() returns.

Hence list_empty(&anchor->urb_list), which is used in the existing
while-loop, doesn't reliably ensure that all URBs of the anchor are gone.

A similar problem exists with usb_poison_anchored_urbs() and
usb_scuttle_anchored_urbs().

This patch adds an external do-while loop, which ensures that all URBs
are indeed handled before these three functions return. This change has
no effect at all unless the race condition occurs, in which case the
loop will busy-wait until the racing completer callback has finished.
This is a rare condition, so the CPU waste of this spinning is
negligible.

The additional do-while loop relies on usb_anchor_check_wakeup(), which
returns true iff the anchor list is empty, and there is no
__usb_hcd_giveback_urb() in the system that is in the middle of the
unanchor-before-complete phase. The @suspend_wakeups member of
struct usb_anchor is used for this purpose, which was introduced to solve
another problem which the same race condition causes, in commit
6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up
till completion is done").

The surely_empty variable is necessary, because usb_anchor_check_wakeup()
must be called with the lock held to prevent races. However the spinlock
must be released and reacquired if the outer loop spins with an empty
URB list while waiting for the unanchor-before-complete passage to finish:
The completer callback may very well attempt to take the very same lock.

To summarize, using usb_anchor_check_wakeup() means that the patched
functions can return only when the anchor's list is empty, and there is
no invisible URB being processed. Since the inner while loop finishes on
the empty list condition, the new do-while loop will terminate as well,
except for when the said race condition occurs.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach

[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ]

When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: don't call del_timer_sync() on uninitialized timer

[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ]

syzbot is reporting that del_timer_sync() is called from
mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without
checking timer_setup() from mwifiex_usb_tx_init() was called [1].

Ganapathi Bhat proposed a possibly cleaner fix, but it seems that
that fix was forgotten [2].

"grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that
currently there are 28 locations which call del_timer[_sync]() only if
that timer's function field was initialized (because timer_setup() sets
that timer's function field). Therefore, let's use same approach here.

[1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959
[2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com

Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: Fix memory leak in reiserfs_parse_options()

[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]

When a usrjquota or grpjquota mount option is used multiple times, we
will leak memory allocated for the file name. Make sure the last setting
is used and all the previous ones are properly freed.

Reported-by: syzbot+c9e294bbe0333a6b7640@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: Fix uninit-value in do_ip_vs_set_ctl()

[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ]

do_ip_vs_set_ctl() is referencing uninitialized stack value when `len` is
zero. Fix it.

Reported-by: syzbot+23b5f9e7caf61d9a3898@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=46ebfb92a8a812621a001ef04d90dfa459520fe2
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: ipwireless: fix error handling

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on
error, the caller should check non zero for error condition

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20200821161942.36589-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Fix list_del corruption while removing active I/O

[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ]

While aborting the I/O, the firmware cleanup task timed out and driver
deleted the I/O from active command list. Some time later the firmware
sent the cleanup task response and driver again deleted the I/O from
active command list causing firmware to send completion for non-existent
I/O and list_del corruption of active command list.

Add fix to check if I/O is present before deleting it from the active
command list to ensure firmware sends valid I/O completion and protect
against list_del corruption.

Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Protect active command list to avoid list corruption

[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ]

Protect active command list for non-I/O commands like login response,
logout response, text response, and recovery cleanup of active list to
avoid list corruption.

Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix use after free in get_capset_info callback.

[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ]

If a response to virtio_gpu_cmd_get_capset_info takes longer than
five seconds to return, the callback will access freed kernel memory
in vg->capsets.

Signed-off-by: Doug Horn <doughorn@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtl8xxxu: prevent potential memory leak

[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]

Free the skb if usb_submit_urb fails on rx_urb. And free the urb
no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]

When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy,
the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be
freed in the caller function.

Fix this by calling wlc_phy_detach_lcnphy in the error handler of
wlc_phy_txpwr_srom_read_lcnphy before returning.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: Fix error return in ibmvfc_probe()

[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ]

Fix to return error code PTR_ERR() from the error handling case instead of
0.

Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Only mark socket zapped after unlocking

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before
setting the socket as zapped, it could potentially race with
l2cap_sock_release which frees the socket. Thus, wait until the cleanup
is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device
rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:
[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ohci: Default to per-port over-current protection

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub
to pins on the SoC. In some cases the unconnected ports generate
spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC
contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current
protection mode (AKA "ganged"). This leads to the spurious over-current
events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending
on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up
  for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching
  remains at none, while over-current protection is now guaranteed to be
  set to per-port rather than the previous behaviour where it was either
  none or global over-current protection depending on the value at
  function entry.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: make sure the rt allocator doesn't run off the end

[ Upstream commit 2a6ca4baed620303d414934aa1b7b0a8e7bab05f ]

There's an overflow bug in the realtime allocator.  If the rt volume is
large enough to handle a single allocation request that is larger than
the maximum bmap extent length and the rt bitmap ends exactly on a
bitmap block boundary, it's possible that the near allocator will try to
check the freeness of a range that extends past the end of the bitmap.
This fails with a corruption error and shuts down the fs.

Therefore, constrain maxlen so that the range scan cannot run off the
end of the rt bitmap.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: only call unlock_new_inode() if I_NEW

[ Upstream commit 8859bf2b1278d064a139e3031451524a49a56bd0 ]

unlock_new_inode() is only meant to be called after a new inode has
already been inserted into the hash table.  But reiserfs_new_inode() can
call it even before it has inserted the inode, triggering the WARNING in
unlock_new_inode().  Fix this by only calling unlock_new_inode() if the
inode has the I_NEW flag set, indicating that it's in the table.

This addresses the syzbot report "WARNING in unlock_new_inode"
(https://syzkaller.appspot.com/bug?extid=187510916eb6a14598f7).

Link: https://lore.kernel.org/r/20200628070057.820213-1-ebiggers@kernel.org
Reported-by: syzbot+187510916eb6a14598f7@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: rtsx: Fix memory leak in rtsx_pci_probe

[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]

When mfd_add_devices() fail, pcr->slots should also be freed. However,
the current implementation does not free the member, leading to a memory
leak.

Fix this by adding a new goto label that frees pcr->slots.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Link: https://lore.kernel.org/r/20200909071853.4053-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]

Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor
systems create a race condition in which usb_kill_anchored_urbs() deallocates
the URB before the completer callback is called in usb_kill_urb(), resulting
in a use-after-free.
To fix this, add proper lock protection to usb_kill_urb() calls that can
possibly run concurrently with usb_kill_anchored_urbs().

Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: flexcan: flexcan_chip_stop(): add error handling and propagate error value

[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ]

This patch implements error handling and propagates the error value of
flexcan_chip_stop(). This function will be called from flexcan_suspend()
in an upcoming patch in some SoCs which support LPSR mode.

Add a new function flexcan_chip_stop_disable_on_error() that tries to
disable the chip even in case of errors.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: cdc-acm: handle broken union descriptors

[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ]

Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.

Note that this still allows for handling union descriptors with switched
interfaces.

This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.

Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Tested-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Avoid accessing uninitialized data on failed inode read

[ Upstream commit 044e2e26f214e5ab26af85faffd8d1e4ec066931 ]

When we fail to read inode, some data accessed in udf_evict_inode() may
be uninitialized. Move the accesses to !is_bad_inode() branch.

Reported-by: syzbot+91f02b28f9bb5f5f1341@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Limit sparing table size

[ Upstream commit 44ac6b829c4e173fdf6df18e6dd86aecf9a3dc99 ]

Although UDF standard allows it, we don't support sparing table larger
than a single block. Check it during mount so that we don't try to
access memory beyond end of buffer.

Reported-by: syzbot+9991561e714f597095da@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: function: printer: fix use-after-free in __lock_acquire

[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]

Fix this by increase object reference count.

BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377

CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff

Allocated by task 2393:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
 __do_sys_symlinkat fs/namei.c:4242 [inline]
 __se_sys_symlinkat fs/namei.c:4239 [inline]
 __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3368:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 slab_free_hook mm/slub.c:1444 [inline]
 slab_free_freelist_hook mm/slub.c:1477 [inline]
 slab_free mm/slub.c:3034 [inline]
 kfree+0xf7/0x410 mm/slub.c:3995
 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
 vfs_unlink+0x287/0x570 fs/namei.c:4073
 do_unlinkat+0x4f9/0x620 fs/namei.c:4137
 __do_sys_unlink fs/namei.c:4184 [inline]
 __se_sys_unlink fs/namei.c:4182 [inline]
 __x64_sys_unlink+0x42/0x50 fs/namei.c:4182
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880683b0000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
 1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: vop: add round_up(x,4) for vring_size to avoid kernel panic

[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ]

Since struct _mic_vring_info and vring are allocated together and follow
vring, if the vring_size() is not four bytes aligned, which will cause
the start address of struct _mic_vring_info is not four byte aligned.
For example, when vring entries is 128, the vring_size() will be 5126
bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400:  00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.

When EP use ioread32(magic) to reads the magic in RC's share memory, it
will cause kernel panic on ARM64 platform due to the cross-byte io read.
Here read magic in user space use le32toh(vr0->info->magic) will meet
the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info
will store in this way:
0x90002400:  00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mic: vop: copy data to kernel space then write to io memory

[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ]

Read and write io memory should address align on ARCH ARM. Change to use
memcpy_toio to avoid kernel panic caused by the address un-align issue.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: core: Add CONTROL field for trace events

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]

trace-cmd report doesn't show events from target subsystem because
scsi_command_size() leaks through event format string:

  [target:target_sequencer_start] function scsi_command_size not defined
  [target:target_cmd_complete] function scsi_command_size not defined

Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't
help because an expression is used inside TP_printk(). trace-cmd event
parser doesn't understand minus sign inside [ ]:

  Error: expected ']' but read '-'

Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated
field for CONTROL byte.

Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mvumi: Fix error return in mvumi_io_attach()

[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ]

Return PTR_ERR() from the error handling case instead of 0.

Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]

get_gendisk grabs a reference on the disk and file operation, so this
code will leak both of them while having absolutely no use for the
gendisk itself.

This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use
get_gendisk to verify partition if resume_file is integer format")

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: handle lack of sband->bitrates in rates

[ Upstream commit 8b783d104e7f40684333d2ec155fac39219beb2f ]

Even though a driver or mac80211 shouldn't produce a
legacy bitrate if sband->bitrates doesn't exist, don't
crash if that is the case either.

This fixes a kernel panic if station dump is run before
last_rate can be updated with a data frame when
sband->bitrates is missing (eg. in S1G bands).

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: add check for mft record size in superblock

[ Upstream commit 4f8c94022f0bc3babd0a124c0a7dcdd7547bd94e ]

Number of bytes allocated for mft record should be equal to the mft record
size stored in ntfs superblock as reported by syzbot, userspace might
trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()

Reported-by: syzbot+aed06913f36eff9b544e@syzkaller.appspotmail.com
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+aed06913f36eff9b544e@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Link: https://syzkaller.appspot.com/bug?extid=aed06913f36eff9b544e
Link: https://lkml.kernel.org/r/20200824022804.226242-1-rkovhaev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: core: Fix runtime PM imbalance in venus_probe

[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced. For other error
paths after this call, things are the same.

Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable'
label. But in this case, the error path after pm_runtime_put_sync()
will decrease PM usage counter twice. Thus add an extra
pm_runtime_get_noresume() in this path to balance PM counter.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix configfs memory leak

[ Upstream commit 3d2825c8c6105b0f36f3ff72760799fa2e71420e ]

This patch fixes the following memory detected by kmemleak and umount
gfs2 filesystem which removed the last lockspace:

unreferenced object 0xffff9264f482f600 (size 192):
  comm "dlm_controld", pid 325, jiffies 4294690276 (age 48.136s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 6e 6f 64 65 73 00 00 00  ........nodes...
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000060481d7>] make_space+0x41/0x130
    [<000000008d905d46>] configfs_mkdir+0x1a2/0x5f0
    [<00000000729502cf>] vfs_mkdir+0x155/0x210
    [<000000000369bcf1>] do_mkdirat+0x6d/0x110
    [<00000000cc478a33>] do_syscall_64+0x33/0x40
    [<00000000ce9ccf01>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

The patch just remembers the "nodes" entry pointer in space as I think
it's created as subdirectory when parent "spaces" is created. In
function drop_space() we will lost the pointer reference to nds because
configfs_remove_default_groups(). However as this subdirectory is always
available when "spaces" exists it will just be freed when "spaces" will be
freed.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7134: avoid a shift overflow

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch:
drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdio: Check for CISTPL_VERS_1 buffer size

[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ]

Before parsing CISTPL_VERS_1 structure check that its size is at least two
bytes to prevent buffer overflow.

Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Ensure all probed info is returned to v4l2

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during
probing, resulting in the camera choosing a different format than
expected. v4l2 can already accommodate such changes, but the code was
not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload
incorrectly, causing corrupted output. This was happening on the
Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating,
but it is still a valid thing for the camera to do. Both macOS and Windows
will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video
from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: media/pci: prevent memory leak in bttv_probe

[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]

In bttv_probe if some functions such as pci_enable_device,
pci_set_dma_mask and request_mem_region fails the allocated
 memory for btv should be released.

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bdisp: Fix runtime PM imbalance on error

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: sti: hva: Fix runtime PM imbalance on error

[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: s3c-camif: Fix runtime PM imbalance on error

[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vsp1: Fix runtime PM imbalance on error

[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Fix a reference count leak

[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sti: Fix reference count leaks

[ Upstream commit 6f4432bae9f2d12fc1815b5e26cc07e69bcad0df ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: st-delta: Fix reference count leak in delta_run_work

[ Upstream commit 57cc666d36adc7b45e37ba4cd7bc4e44ec4c43d7 ]

delta_run_work() calls delta_get_sync() that increments
the reference counter. In case of failure, decrement the reference
count by calling delta_put_autosuspend().

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ati_remote: sanity check for both endpoints

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]

If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.

Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: firewire: fix memory leak

[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ]

Fix memory leak in node_probe.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - fix error handling

[ Upstream commit e356c49c6cf0db3f00e1558749170bd56e47652d ]

Fix resource leak in error handling.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

[ Upstream commit 8058d69905058ec8f467a120b5ec5bb831ea67f3 ]

Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().

But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().

Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.

This fixes the Microsoft Surface Go 2 hanging at boot.

Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: correct SNOOPX field offset

[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ]

perf_event.h has macros that define the field offsets in the
data_src bitmask in perf records. The SNOOPX and REMOTE offsets
were both 37. These are distinct fields, and the bitfield layout
in perf_mem_data_src confirms that SNOOPX should be at offset 38.

Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings")
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/4ac9f5cc-4388-b34a-9999-418a4099415d@foss.arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

NTB: hw: amd: fix an issue about leak system resources

[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ]

The related system resources were not released when pci_set_dma_mask(),
pci_set_consistent_dma_mask(), or pci_iomap() return error in the
amd_ntb_init_pci() function. Add pci_release_regions() to fix it.

Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Kaige Li <likaige@loongson.cn>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: fix uninitialized work for zero kato

[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ]

When connecting a controller with a zero kato value using the following
command line

   nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0

the warning below can be reproduced:

WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
  mod_delayed_work_on+0x59/0x90
  nvmet_update_cc+0xee/0x100 [nvmet]
  nvmet_execute_prop_set+0x72/0x80 [nvmet]
  nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
  nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
  ...

This is caused by queuing up an uninitialized work.  Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d213a), ka_work still has a chance to run (called by
nvmet_start_ctrl).

Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/dump: Fix race while processing OPAL dump

[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.

However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.

Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface")
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

[ Upstream commit 35292518cb0a626fcdcabf739aed75060a018ab5 ]

DT binding permits only one compatible string which was decribed in past by
commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq
Ultrascale+ MPSoC").
The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence
documentation to YAML") has converted binding to yaml and the following
issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed
('cdns,i2c-r1p10' was unexpected)
From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds
...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too
long

The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
has added the second compatible string but without removing origin one.
The patch is only keeping one compatible string "cdns,i2c-r1p14".

Fixes: c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers

[ Upstream commit 55f6c9931f7c32f19cf221211f099dfd8dab3af9 ]

The PPI interrupts for cortex-a9 were incorrectly specified, fix them.

Fixes: fdfe7f4f9d85 ("ARM: dts: Add Actions Semi S500 and LeMaker Guitar")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts

[ Upstream commit 027cca9eb5b450c3f6bb916ba999144c2ec23cb7 ]

The mdss node sets #interrupt-cells = <1>, so its interrupts
should be referenced using a single cell (in this case: only the
interrupt number).

However, right now the mdp/dsi node both have two interrupt cells
set, e.g. interrupts = <4 0>. The 0 is probably meant to say
IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is
actually interpreted as a second interrupt line.

Remove the IRQ flags from both interrupts to fix this.

Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-5-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200827073315.29351-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: omap-gpmc: Fix a couple off by ones

[ Upstream commit 4c54228ac8fd55044195825873c50a524131fa53 ]

These comparisons should be >= instead of > to prevent reading one
element beyond the end of the gpmc_cs[] array.

Fixes: cdd6928c589a ("ARM: OMAP2+: Add device-tree support for NOR flash")
Fixes: f37e4580c409 ("ARM: OMAP2: Dynamic allocator for GPMC memory space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200825104707.GB278587@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: emulating RDPID failure shall return #UD rather than #GP

[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]

Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or
less what KVM is emulating when MSR_TSC_AUX is not available.  In fact,
there are no scenarios in which RDPID is supposed to #GP.

Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1598581422-76264-1-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: sun4i-ps2 - fix handling of platform_get_irq() error

[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: twl4030_keypad - fix handling of platform_get_irq() error

[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ]

platform_get_irq() returns -ERRNO on error.  In such case casting to
unsigned and comparing to 0 would pass the check.

Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-3-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: omap4-keypad - fix handling of platform_get_irq() error

[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-2-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: ep93xx_keypad - fix handling of platform_get_irq() error

[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-1-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: stmfts - fix a & vs && typo

[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ]

In stmfts_sysfs_hover_enable_write(), we should check value and
sdata->hover_enabled is all true.

Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>