git.stricted.de - GitHub/exynos8895/android_kernel_samsung

hwmon: (asus_atk0110) fix uninitialized data access

[ Upstream commit a2125d02443e9a4e68bcfd9f8004fa23239e8329 ]

The latest gcc-7 snapshot adds a warning to point out that when
atk_read_value_old or atk_read_value_new fails, we copy
uninitialized data into sensor->cached_value:

drivers/hwmon/asus_atk0110.c: In function 'atk_input_show':
drivers/hwmon/asus_atk0110.c:651:26: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Adding an error check avoids this. All versions of the driver
are affected.

Fixes: 2c03d07ad54d ("hwmon: Add Asus ATK0110 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ti: fix PCI bus dtc warnings

[ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ]

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Fix enable VPID conditions

[ Upstream commit 08d839c4b134b8328ec42f2157a9ca4b93227c03 ]

This can be reproduced by running L2 on L1, and disable VPID on L0
if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2
crash as below:

KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 0000ffff
IDT=     00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000

Reference SDM 30.3 INVVPID:

Protected Mode Exceptions
- #UD
  - If not in VMX operation.
  - If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0).
  - If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does
    not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0).

So we should check both VPID enable bit in vmx exec control and INVVPID support bit
in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable
VPID if either INVVPID or single-context/all-context invalidation is not exposed in
vmx capability MSRs.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: correct async page present tracepoint

[ Upstream commit 24dccf83a121b8a4ad5c2ad383a8184ef6c266ee ]

After async pf setup successfully, there is a broadcast wakeup w/ special
token 0xffffffff which tells vCPU that it should wake up all processes
waiting for APFs though there is no real process waiting at the moment.

The async page present tracepoint print prematurely and fails to catch the
special token setup. This patch fixes it by moving the async page present
tracepoint after the special token setup.

Before patch:

qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0

After patch:

qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix PT2PT PRLI reject

[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: st: add irq_request/release_resources callbacks

[ Upstream commit e855fa9a65c40788b5069abb0d094537daa22e05 ]

When using GPIO as IRQ source, the GPIO must be configured
in INPUT. Callbacks dedicated for this was missing in
pinctrl-st driver.

This fix the following kernel error when trying to lock a gpio
as IRQ:

[    7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[    7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frag: release spinlock before calling icmp_send()

[ Upstream commit ec4fbd64751de18729eaa816ec69e4b504b5a7a2 ]

Dmitry reported a lockdep splat [1] (false positive) that we can fix
by releasing the spinlock before calling icmp_send() from ip_expire()

This is a false positive because sending an ICMP message can not
possibly re-enter the IP frag engine.

[1]
[ INFO: possible circular locking dependency detected ]
4.10.0+ #29 Not tainted
-------------------------------------------------------
modprobe/12392 is trying to acquire lock:
(_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock
include/linux/spinlock.h:299 [inline]
(_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock
include/linux/netdevice.h:3486 [inline]
(_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180

but task is already holding lock:
(&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
(&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&q->lock)->rlock){+.-...}:
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669
       ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713
       packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459
       deliver_skb net/core/dev.c:1834 [inline]
       dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890
       xmit_one net/core/dev.c:2903 [inline]
       dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923
       sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308
       neigh_output include/net/neighbour.h:478 [inline]
       ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228
       ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672
       ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545
       ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655
       inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985
       __sys_sendmmsg+0x25c/0x750 net/socket.c:2075
       SYSC_sendmmsg net/socket.c:2106 [inline]
       SyS_sendmmsg+0x35/0x60 net/socket.c:2101
       do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281
       return_from_SYSCALL_64+0x0/0x7a

-> #0 (_xmit_ETHER#2){+.-...}:
       check_prev_add kernel/locking/lockdep.c:1830 [inline]
       check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       __netif_tx_lock include/linux/netdevice.h:3486 [inline]
       sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_hh_output include/net/neighbour.h:468 [inline]
       neigh_output include/net/neighbour.h:476 [inline]
       ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
       ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
       icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
       ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
       call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
       expire_timers kernel/time/timer.c:1307 [inline]
       __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
       run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
       __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1cc/0x200 kernel/softirq.c:405
       exiting_irq arch/x86/include/asm/apic.h:657 [inline]
       smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
       apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
       __read_once_size include/linux/compiler.h:254 [inline]
       atomic_read arch/x86/include/asm/atomic.h:26 [inline]
       rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
       __rcu_is_watching kernel/rcu/tree.c:1133 [inline]
       rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
       rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
       radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
       filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
       do_fault_around mm/memory.c:3231 [inline]
       do_read_fault mm/memory.c:3265 [inline]
       do_fault+0xbd5/0x2080 mm/memory.c:3370
       handle_pte_fault mm/memory.c:3600 [inline]
       __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
       handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
       __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
       do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
       page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011

other info that might help us debug this:

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&q->lock)->rlock);
                               lock(_xmit_ETHER#2);
                               lock(&(&q->lock)->rlock);
  lock(_xmit_ETHER#2);

*** DEADLOCK ***

10 locks held by modprobe/12392:
#0:  (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>]
__do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336
#1:  (rcu_read_lock){......}, at: [<ffffffff8188cab6>]
filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324
#2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
spin_lock include/linux/spinlock.h:299 [inline]
#2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
pte_alloc_one_map mm/memory.c:2944 [inline]
#2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072
#3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
lockdep_copy_map include/linux/lockdep.h:175 [inline]
#3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258
#4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
#4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201
#5:  (rcu_read_lock){......}, at: [<ffffffff8389a633>]
ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216
#6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock
include/linux/spinlock.h:309 [inline]
#6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock
net/ipv4/icmp.c:219 [inline]
#6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>]
icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681
#7:  (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>]
ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198
#8:  (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>]
__dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324
#9:  (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at:
[<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423

stack backtrace:
CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204
check_prev_add kernel/locking/lockdep.c:1830 [inline]
check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
validate_chain kernel/locking/lockdep.c:2267 [inline]
__lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:299 [inline]
__netif_tx_lock include/linux/netdevice.h:3486 [inline]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
__dev_xmit_skb net/core/dev.c:3092 [inline]
__dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
neigh_hh_output include/net/neighbour.h:468 [inline]
neigh_output include/net/neighbour.h:476 [inline]
ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:246 [inline]
ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
dst_output include/net/dst.h:486 [inline]
ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
expire_timers kernel/time/timer.c:1307 [inline]
__run_timers+0x960/0xcf0 kernel/time/timer.c:1601
run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
__do_softirq+0x31f/0xbe7 kernel/softirq.c:284
invoke_softirq kernel/softirq.c:364 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:657 [inline]
smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline]
RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c
RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000
R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25
R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000
</IRQ>
rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
do_fault_around mm/memory.c:3231 [inline]
do_read_fault mm/memory.c:3265 [inline]
do_fault+0xbd5/0x2080 mm/memory.c:3370
handle_pte_fault mm/memory.c:3600 [inline]
__handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
__do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011
RIP: 0033:0x7f83172f2786
RSP: 002b:00007fffe859ae80 EFLAGS: 00010293
RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970
RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000
R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040
R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nfnl_cthelper: Fix memory leak

[ Upstream commit f83bf8da1135ca635aac8f062cad3f001fcf3a26 ]

We have memory leaks of nf_conntrack_helper & expect_policy.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nfnl_cthelper: fix runtime expectation policy updates

[ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ]

We only allow runtime updates of expectation policies for timeout and
maximum number of expectations, otherwise reject the update.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: remove pointer dereference after free

[ Upstream commit 1f459262b0e1649a1e5ad12fa4c66eb76c2220ce ]

Remove pointer dereference after free.

Addresses-Coverity-ID: 1091173
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

[ Upstream commit 16bb05d98c904a4f6c5ce7e2d992299f794acbf2 ]

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4

[ Upstream commit 4071898bf0f4d79ff353db327af2a15123272548 ]

This gets qmicli working with the MDM6600 modem.

Cc: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bna: integer overflow bug in debugfs

[ Upstream commit 13e2d5187f6b965ba3556caedb914baf81b98ed2 ]

We could allocate less memory than intended because we do:

bnad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash. This is debugfs code so the
impact is very small.

Fixes: 7afc5dbde091 ("bna: Add debugfs interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_dsmark: fix invalid skb_cow() usage

[ Upstream commit aea92fb2e09e29653b023d4254ac9fbf94221538 ]

skb_cow(skb, sizeof(ip header)) is not very helpful in this context.

First we need to use pskb_may_pull() to make sure the ip header
is in skb linear part, then use skb_try_make_writable() to
address clones issues.

Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

[ Upstream commit 8a0f5ccfb33b0b8b51de65b7b3bf342ba10b4fb6 ]

On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote:
>
> Yes, please.
> Disregarding some reports is not a good way long term.

Please try this patch.

---8<---
Subject: netlink: Annotate nlk cb_mutex by protocol

Currently all occurences of nlk->cb_mutex are annotated by lockdep
as a single class. This causes a false lcokdep cycle involving
genl and crypto_user.

This patch fixes it by dividing cb_mutex into individual classes
based on the netlink protocol. As genl and crypto_user do not
use the same netlink protocol this breaks the false dependency
loop.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: fix the list rx_done may be used without initialization

[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ]

The list rx_done would be initialized when the linking on occurs.
Therefore, if a napi is scheduled without any linking on before,
the following kernel panic would happen.

BUG: unable to handle kernel NULL pointer dereference at 000000000000008
IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152]
PGD 0
Oops: 0002 [#1] SMP

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

[ Upstream commit ad0a45fd9c14feebd000b6e84189d0edff265170 ]

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: kprobes: Align stack to 8-bytes in test code

[ Upstream commit 974310d047f3c7788a51d10c8d255eebdb1fa857 ]

kprobes test cases need to have a stack that is aligned to an 8-byte
boundary because they call other functions (and the ARM ABI mandates
that alignment) and because test cases include 64-bit accesses to the
stack. Unfortunately, GCC doesn't ensure this alignment for inline
assembler and for the code in question seems to always misalign it by
pushing just the LR register onto the stack. We therefore need to
explicitly perform stack alignment at the start of each test case.

Without this fix, some test cases will generate alignment faults on
systems where alignment is enforced. Even if the kernel is configured to
handle these faults in software, triggering them is ugly. It also
exposes limitations in the fault handling code which doesn't cope with
writes to the stack. E.g. when handling this instruction

strd r6, [sp, #-64]!

the fault handling code will write to a stack location below the SP
value at the point the fault occurred, which coincides with where the
exception handler has pushed the saved register context. This results in
corruption of those registers.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: kprobes: Fix the return address of multiple kretprobes

[ Upstream commit 06553175f585b52509c7df37d6f4a50aacb7b211 ]

This is arm port of commit 737480a0d525 ("kprobes/x86:
Fix the return address of multiple kretprobes").

Fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.

For example:

  # cd /sys/kernel/debug/tracing
  # echo "r:event1 sys_symlink" > kprobe_events
  # echo "r:event2 sys_symlink" >> kprobe_events
  # echo 1 > events/kprobes/enable
  # ln -s /tmp/foo /tmp/bar

(without this patch)

  # cat trace | grep -v ^#
              ln-82    [000] dn.2    68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink)
              ln-82    [000] dn.2    68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

(with this patch)

  # cat trace | grep -v ^#
              ln-81    [000] dn.1    39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
              ln-81    [000] dn.1    39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: KUMANO Syuhei <kumano.prog@gmail.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - add support for docking station for HP 840 G3

[ Upstream commit cc3a47a248d7791ef0d2c81a35c46769e55e4c6c ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 840 G3.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - add support for docking station for HP 820 G2

[ Upstream commit 04d5466a976b096364a39a63ac264c1b3a5f8fa1 ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Do not substract irq_tlb_count from irq_call_count

commit 82ba4faca1bffad429f15c90c980ffd010366c25 upstream.

Since commit:

  52aec3308db8 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR")

the TLB remote shootdown is done through call function vector. That
commit didn't take care of irq_tlb_count, which a later commit:

  fd0f5869724f ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts")

... tried to fix.

The fix assumes every increase of irq_tlb_count has a corresponding
increase of irq_call_count. So the irq_call_count is always bigger than
irq_tlb_count and we could substract irq_tlb_count from irq_call_count.

Unfortunately this is not true for the smp_call_function_single() case.
The IPI is only sent if the target CPU's call_single_queue is empty when
adding a csd into it in generic_exec_single. That means if two threads
are both adding flush tlb csds to the same CPU's call_single_queue, only
one IPI is sent. In other words, the irq_call_count is incremented by 1
but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be
bigger than irq_call_count and the substract will produce a very large
irq_call_count value due to overflow.

Considering that:

  1) it's not worth to send more IPIs for the sake of accurate counting of
     irq_call_count in generic_exec_single();

  2) it's not easy to tell if the call function interrupt is for TLB
     shootdown in __smp_call_function_single_interrupt().

Not to exclude TLB shootdown from call function count seems to be the
simplest fix and this patch just does that.

This bug was found by LKP's cyclic performance regression tracking recently
with the vm-scalability test suite. I have bisected to commit:

  3dec0ba0be6a ("mm/rmap: share the i_mmap_rwsem")

This commit didn't do anything wrong but revealed the irq_call_count
problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file
concurrent with multiple threads.  When remap_one is try_to_unmap_one(),
then multiple threads could queue flush TLB to the same CPU but only
one IPI will be sent.

Since the commit was added in Linux v3.19, the counting problem only
shows up from v3.19 onwards.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()

commit 252d2a4117bc181b287eeddf848863788da733ae upstream.

idle_task_exit() can be called with IRQs on x86 on and therefore
should use switch_mm(), not switch_mm_irqs_off().

This doesn't seem to cause any problems right now, but it will
confuse my upcoming TLB flush changes. Nonetheless, I think it
should be backported because it's trivial. There won't be any
meaningful performance impact because idle_task_exit() is only
used when offlining a CPU.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: Hide finish_arch_post_lock_switch() from modules

commit ef0491ea17f8019821c7e9c8e801184ecf17f85a upstream.

The introduction of switch_mm_irqs_off() brought back an old bug
regarding the use of preempt_enable_no_resched:

As part of:

  62b94a08da1b ("sched/preempt: Take away preempt_enable_no_resched() from modules")

the definition of preempt_enable_no_resched() is only available in
built-in code, not in loadable modules, so we can't generally use
it from header files.

However, the ARM version of finish_arch_post_lock_switch()
calls preempt_enable_no_resched() and is defined as a static
inline function in asm/mmu_context.h. This in turn means we cannot
include asm/mmu_context.h from modules.

With today's tip tree, asm/mmu_context.h gets included from
linux/mmu_context.h, which is normally the exact pattern one would
expect, but unfortunately, linux/mmu_context.h can be included from
the vhost driver that is a loadable module, now causing this compile
time error with modular configs:

  In file included from ../include/linux/mmu_context.h:4:0,
                   from ../drivers/vhost/vhost.c:18:
  ../arch/arm/include/asm/mmu_context.h: In function 'finish_arch_post_lock_switch':
  ../arch/arm/include/asm/mmu_context.h:88:3: error: implicit declaration of function 'preempt_enable_no_resched' [-Werror=implicit-function-declaration]
     preempt_enable_no_resched();

Andy already tried to fix the bug by including linux/preempt.h
from asm/mmu_context.h, but that didn't help. Arnd suggested reordering
the header files, which wasn't popular, so let's use this
workaround instead:

The finish_arch_post_lock_switch() definition is now also hidden
inside of #ifdef MODULE, so we don't see anything referencing
preempt_enable_no_resched() from a header file. I've built a
few hundred randconfig kernels with this, and did not see any
new problems.

Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/1463146234-161304-1-git-send-email-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm, sched/core: Turn off IRQs in switch_mm()

commit 078194f8e9fe3cf54c8fd8bded48a1db5bd8eb8a upstream.

Potential races between switch_mm() and TLB-flush or LDT-flush IPIs
could be very messy. AFAICT the code is currently okay, whether by
accident or by careful design, but enabling PCID will make it
considerably more complicated and will no longer be obviously safe.

Fix it with a big hammer: run switch_mm() with IRQs off.

To avoid a performance hit in the scheduler, we take advantage of
our knowledge that the scheduler already has IRQs disabled when it
calls switch_mm().

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f19baf759693c9dcae64bbff76189db77cb13398.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm, sched/core: Uninline switch_mm()

commit 69c0319aabba45bcf33178916a2f06967b4adede upstream.

It's fairly large and it has quite a few callers. This may also
help untangle some headers down the road.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/54f3367803e7f80b2be62c8a21879aa74b1a5f57.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Build arch/x86/mm/tlb.c even on !SMP

commit e1074888c326038340a1ada9129d679e661f2ea6 upstream.

Currently all of the functions that live in tlb.c are inlined on
!SMP builds. One can debate whether this is a good idea (in many
respects the code in tlb.c is better than the inlined UP code).

Regardless, I want to add code that needs to be built on UP and SMP
kernels and relates to tlb flushing, so arrange for tlb.c to be
compiled unconditionally.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f0d778f0d828fc46e5d1946bca80f0aaf9abf032.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Add switch_mm_irqs_off() and use it in the scheduler

commit f98db6013c557c216da5038d9c52045be55cd039 upstream.

By default, this is the same thing as switch_mm().

x86 will override it as an optimization.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/df401df47bdd6be3e389c6f1e3f5310d70e81b2c.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmu_context, sched/core: Fix mmu_context.h assumption

commit 8efd755ac2fe262d4c8d5c9bbe054bb67dae93da upstream.

Some architectures (such as Alpha) rely on include/linux/sched.h definitions
in their mmu_context.h files.

So include sched.h before mmu_context.h.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/rmap: batched invalidations should use existing api

commit 858eaaa711700ce4595e039441e239e56d7b9514 upstream.

The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown. However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.

This patch reuses the existing TLB flushing mechnaisms instead. We use
NULL as mm to indicate a global invalidation is required.

Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: If INVPCID is available, use it to flush global mappings

commit d8bced79af1db6734f66b42064cc773cada2ce99 upstream.

On my Skylake laptop, INVPCID function 2 (flush absolutely
everything) takes about 376ns, whereas saving flags, twiddling
CR4.PGE to flush global mappings, and restoring flags takes about
539ns.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/ed0ef62581c0ea9c99b9bf6df726015e96d44743.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID

commit d12a72b844a49d4162f24cefdab30bed3f86730e upstream.

This adds a chicken bit to turn off INVPCID in case something goes
wrong. It's an early_param() because we do TLB flushes before we
parse __setup() parameters.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/f586317ed1bc2b87aee652267e515b90051af385.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix INVPCID asm constraint

commit e2c7698cd61f11d4077fdb28148b2d31b82ac848 upstream.

So we want to specify the dependency on both @pcid and @addr so that the
compiler doesn't reorder accesses to them *before* the TLB flush. But
for that to work, we need to express this properly in the inline asm and
deref the whole desc array, not the pointer to it. See clwb() for an
example.

This fixes the build error on 32-bit:

arch/x86/include/asm/tlbflush.h: In function ‘__invpcid’:
arch/x86/include/asm/tlbflush.h:26:18: error: memory input 0 is not directly addressable

which gcc4.7 caught but 5.x didn't. Which is strange. :-\

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Michael Matz <matz@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Add INVPCID helpers

commit 060a402a1ddb551455ee410de2eadd3349f2801b upstream.

This adds helpers for each of the four currently-specified INVPCID
modes.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/8a62b23ad686888cee01da134c91409e22064db9.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Check if vphb exists before iterating over AFU devices

commit 12841f87b7a8ceb3d54f171660f72a86941bfcb3 upstream.

During an eeh a kernel-oops is reported if no vPHB is allocated to the
AFU. This happens as during AFU init, an error in creation of vPHB is
a non-fatal error. Hence afu->phb should always be checked for NULL
before iterating over it for the virtual AFU pci devices.

This patch fixes the kenel-oops by adding a NULL pointer check for
afu->phb before it is dereferenced.

Fixes: 9e8df8a21963 ("cxl: EEH support")
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Initialise high_memory global variable earlier

commit f24e5834a2c3f6c5f814a417f858226f0a010ade upstream.

The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.

We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.

This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.

This patch moves the initialisation of high_memory before it used.

Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.107

ath9k: fix tx99 potential info leak

[ Upstream commit ee0a47186e2fa9aa1c56cadcea470ca0ba8c8692 ]

When the user sets count to zero the string buffer would remain
completely uninitialized which causes the kernel to parse its
own stack data, potentially leading to an info leak. In addition
to that, the string might be not terminated properly when the
user data does not contain a 0-terminator.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop

[ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ]

When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.

Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Avoid triggering undefined behavior

[ Upstream commit c0b64f58e8d49570aa9ee55d880f92c20ff0166b ]

According to the C standard the behavior of computations with
integer operands is as follows:
* A computation involving unsigned operands can never overflow,
  because a result that cannot be represented by the resulting
  unsigned integer type is reduced modulo the number that is one
  greater than the largest value that can be represented by the
  resulting type.
* The behavior for signed integer underflow and overflow is
  undefined.

Hence only use unsigned integers when checking for integer
overflow.

This patch is what I came up with after having analyzed the
following smatch warnings:

drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: Only deliver one copy of the frame to the macvlan interface

[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ]

This patch intoduces a slight adjustment for macvlan to address the fact
that in source mode I was seeing two copies of any packet addressed to the
macvlan interface being delivered where there should have been only one.

The issue appears to be that one copy was delivered based on the source MAC
address and then the second copy was being delivered based on the
destination MAC address. To fix it I am just treating a unicast address
match as though it is not a match since source based macvlan isn't supposed
to be matching based on the destination MAC anyway.

Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Avoid overflow when session starts at large offset

[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]

When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.

Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bfa: integer overflow in debugfs

[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]

We could allocate less memory than intended because we do:

bfad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash. This is debugfs code so the
impact is very small. I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").

Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: change allow_restart to bool in sysfs interface

[ Upstream commit 658e9a6dc1126f21fa417cd213e1cdbff8be0ba2 ]

/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:

echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: change manage_start_stop to bool in sysfs interface

[ Upstream commit 623401ee33e42cee64d333877892be8db02951eb ]

/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend

[ Upstream commit 42c8eb3f6e15367981b274cb79ee4657e2c6949d ]

The driver may sleep under a spinlock, and the function call path is:
vt6655_suspend (acquire the spinlock)
  pci_set_power_state
    __pci_start_power_transition (drivers/pci/pci.c)
      msleep --> may sleep

To fix it, pci_set_power_state is called without having a spinlock.

This bug is found by my static analysis tool and my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry

[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]

All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

raid5: Set R5_Expanded on parity devices as well as data.

[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]

When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.

Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.

So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.

Reported-by: Curt <lightspd@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: adi2: Fix Kconfig build problem

[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]

The build robot is complaining on Blackfin:

drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
   pointer to incomplete type 'struct gpio_port_t'
      writew(readw(&regs->port_fer) & ~BIT(offset),
                        ^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
      if (readl(&regs->invert_set) & pintbit)
                     ^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.

The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.

Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.

Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.

This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: da8xx: fix babble condition handling

commit bd3486ded7a0c313a6575343e6c2b21d14476645 upstream.

When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.

In this case, we should handle the babble interrupt first and recover
from the babble condition.

This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty fix oops when rmmod 8250

[ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ]

After rmmod 8250.ko
tty_kref_put starts kwork (release_one_tty) to release proc interface
oops when accessing driver->driver_name in proc_tty_unregister_driver

Use jprobe, found driver->driver_name point to 8250.ko
static static struct uart_driver serial8250_reg
.driver_name= serial,

Use name in proc_dir_entry instead of driver->driver_name to fix oops

test on linux 4.1.12:

BUG: unable to handle kernel paging request at ffffffffa01979de
IP: [<ffffffff81310f40>] strchr+0x0/0x30
PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ... ...  [last unloaded: 8250]
CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G           O    4.1.12 #1
Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015
Workqueue: events release_one_tty
task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000
RIP: 0010:[<ffffffff81310f40>]  [<ffffffff81310f40>] strchr+0x0/0x30
RSP: 0018:ffff880852887c90  EFLAGS: 00010282
RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004
RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de
RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0
R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de
R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0
Stack:
ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2
ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010
ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08
Call Trace:
[<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0
[<ffffffff812354f0>] remove_proc_entry+0x40/0x180
[<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60
[<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0
[<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40
[<ffffffff813be548>] destruct_tty_driver+0x88/0xe0
[<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20
[<ffffffff813becca>] release_one_tty+0x5a/0xd0
[<ffffffff81074159>] process_one_work+0x139/0x420
[<ffffffff810745a1>] worker_thread+0x121/0x450
[<ffffffff81074480>] ? process_scheduled_works+0x40/0x40
[<ffffffff8107a16c>] kthread+0xec/0x110
[<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
[<ffffffff815f7292>] ret_from_fork+0x42/0x70
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80

Signed-off-by: nixiaoming <nixiaoming@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf/hv-24x7: Fix incorrect comparison in memord

[ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ]

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hpsa: destroy sas transport properties before scsi_host

[ Upstream commit dfb2e6f46b3074eb85203d8f0888b71ec1c2e37a ]

This patch cleans up a lot of warnings when unloading the driver.

A current example of the stack trace starts with:
    [  142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

---------------------------
Original patch description:
---------------------------

Unloading the hpsa driver causes warnings

[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'

with two different stacks:
1)
[ 1063.793774]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780]  [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784]  [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802]  [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

2)
[ 1063.797103]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118]  [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.

This patch fixes this by reverting the order of device deletions.

Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hpsa: cleanup sas_phy structures in sysfs when unloading

[ Upstream commit 55ca38b4255bb336c2d35990bdb2b368e19b435a ]

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

--------------------------------------
Original patch description from Martin:
--------------------------------------

When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).

Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Detach driver before procfs & sysfs teardown on device remove

[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]

When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time.  The device might need
to write out data or it might be actively in use.  If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device.  This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:

  pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
  lspci: Unable to read the standard configuration space header of device 0000:01:0a.3

We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real

[ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ]

There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the
passed in new extent state but always converted to normal, leading to wrong
behavior when converting from normal to unwritten.

Only found by code inspection, it seems like this code path to move partial
extent from written to unwritten while merging it with the next extent is
rarely exercised.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix log block underflow during recovery cycle verification

[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]

It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.

Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.

Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: cleanup l2tp_tunnel_delete calls

[ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ]

l2tp_tunnel_delete does not return anything since commit 62b982eeb458
("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of
l2tp_tunnel_delete still do casts to void to avoid unused return value
warnings.

Kill these now useless casts.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: fix wrong cache_misses statistics

[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ]

Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.

[ML: applied by 3-way merge]

Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: explicitly destroy mutex while exiting

[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]

mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.

As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: Take inode off order_write list when setting jdata flag

[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]

This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/step_wise: Fix temperature regulation misbehavior

[ Upstream commit 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 ]

There is a particular situation when the cooling device is cpufreq and the heat
dissipation is not efficient enough where the temperature increases little by
little until reaching the critical threshold and leading to a SoC reset.

The behavior is reproducible on a hikey6220 with bad heat dissipation (eg.
stacked with other boards).

Running a simple C program doing while(1); for each CPU of the SoC makes the
temperature to reach the passive regulation trip point and ends up to the
maximum allowed temperature followed by a reset.

This issue has been also reported by running the libhugetlbfs test suite.

What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz
while the temperature continues to grow.

It appears the step wise governor calls get_target_state() the first time with
the throttle set to true and the trend to 'raising'. The code selects logically
the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so
good. The temperature decreases immediately but still stays greater than the
trip point, then get_target_state() is called again, this time with the
throttle set to true *and* the trend to 'dropping'. From there the algorithm
assumes we have to step down the state and the cpu frequency jumps back to
1.2GHz. But the temperature is still higher than the trip point, so
get_target_state() is called with throttle=1 and trend='raising' again, we jump
to 900MHz, then get_target_state() is called with throttle=1 and
trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not
stabilizes and continues to increase.

[  237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  237.922690] thermal cooling_device0: cur_state=0
[  237.922701] thermal cooling_device0: old_target=0, target=1
[  238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[  238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[  238.026694] thermal cooling_device0: cur_state=1
[  238.026707] thermal cooling_device0: old_target=1, target=0
[  238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  238.134679] thermal cooling_device0: cur_state=0
[  238.134690] thermal cooling_device0: old_target=0, target=1

In this situation the temperature continues to increase while the trend is
oscillating between 'dropping' and 'raising'. We need to keep the current state
untouched if the throttle is set, so the temperature can decrease or a higher
state could be selected, thus preventing this oscillation.

Keeping the next_target untouched when 'throttle' is true at 'dropping' time
fixes the issue.

The following traces show the governor does not change the next state if
trend==2 (dropping) and throttle==1.

[ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2306.128021] thermal cooling_device0: cur_state=0
[ 2306.128031] thermal cooling_device0: old_target=0, target=1
[ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[ 2306.232030] thermal cooling_device0: cur_state=1
[ 2306.232042] thermal cooling_device0: old_target=1, target=1
[ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1
[ 2306.336021] thermal cooling_device0: cur_state=1
[ 2306.336034] thermal cooling_device0: old_target=1, target=1
[ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2306.440022] thermal cooling_device0: cur_state=1
[ 2306.440034] thermal cooling_device0: old_target=1, target=0

[ ... ]

After a while, if the temperature continues to increase, the next state becomes
2 which is 720MHz on the hikey. That results in the temperature stabilizing
around the trip point.

[ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0
[ 2455.832019] thermal cooling_device0: cur_state=1
[ 2455.832032] thermal cooling_device0: old_target=1, target=1
[ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2455.936027] thermal cooling_device0: cur_state=1
[ 2455.936040] thermal cooling_device0: old_target=1, target=1
[ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2456.044023] thermal cooling_device0: cur_state=1
[ 2456.044036] thermal cooling_device0: old_target=1, target=1
[ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2456.148042] thermal cooling_device0: cur_state=1
[ 2456.148055] thermal cooling_device0: old_target=1, target=2
[ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2456.252058] thermal cooling_device0: cur_state=2
[ 2456.252075] thermal cooling_device0: old_target=2, target=1

IOW, this change is needed to keep the state for a cooling device if the
temperature trend is oscillating while the temperature increases slightly.

Without this change, the situation above leads to a catastrophic crash by a
hardware reset on hikey. This issue has been reported to happen on an OMAP
dra7xx also.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: Destroy the mutex when cleanup

[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ]

The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the
good readbility, it's better to invoke it in exit func when the init
func invokes mutex_init.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: Fix cclk_lp divisor register

[ Upstream commit 54eff2264d3e9fd7e3987de1d7eba1d3581c631e ]

According to comments in code and common sense, cclk_lp uses its
own divisor, not cclk_g's.

Fixes: b08e8c0ecc42 ("clk: tegra: add clock support for Tegra30")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU

[ Upstream commit c68ee58d9ee7b856ac722f18f4f26579c8fbd2b4 ]

On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver
fails to probe:

[    2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller
(0000:00:00)
[    2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi
(ops dw_hdmi_imx_ops): -19
[    2.557403] imx-drm display-subsystem: master bind failed: -19

That's because hdmi_isfr's parent, video_27m, is not correctly ungated.
As explained in commit 5ccc248cc537 ("ARM: imx6q: clk: Add support for
mipi_core_cfg clock as a shared clock gate"), video_27m is gated by
CCM_CCGR3[CG8].

On i.MX6 SoCs with VPU, the hdmi is working thanks to the
CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever
is in CCM_CCGR3[CG8]. The issue can be reproduced by setting
CCMEOR[mod_en_ov_vpu] to 0.

Make the HDMI work in every case by setting hdmi_isfr's parent to
mipi_core_cfg.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mediatek: add the option for determining PLL source clock

[ Upstream commit c955bf3998efa3355790a4d8c82874582f1bc727 ]

Since the previous setup always sets the PLL using crystal 26MHz, this
doesn't always happen in every MediaTek platform. So the patch added
flexibility for assigning extra member for determining the PLL source
clock.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Handle 0 flags in _calc_vm_trans() macro

[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]

_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: tcrypt - fix buffer lengths in test_aead_speed()

[ Upstream commit 7aacbfcb331ceff3ac43096d563a1f93ed46e35e ]

Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.

Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm-ccn: perf: Prevent module unload while PMU is in use

[ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ]

When the PMU driver is built as a module, the perf expects the
pmu->module to be valid, so that the driver is prevented from
being unloaded while it is in use. Fix the CCN pmu driver to
fill in this field.

Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver")
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/file: Do not return error for UNMAP if length is zero

[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ]

The function fd_execute_unmap() in target_core_file.c calles

ret = file->f_op->fallocate(file, mode, pos, len);

Some filesystems implement fallocate() to return error if
length is zero (e.g. btrfs) but according to SCSI Block
Commands spec UNMAP should return success for zero length.

Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target:fix condition return in core_pr_dump_initiator_port()

[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ]

When is pr_reg->isid_present_at_reg is false,this function should return.

This fixes a regression originally introduced by:

  commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5
  Author: Andy Grover <agrover@redhat.com>
  Date:   Thu May 16 10:40:55 2013 -0700

      target: Alter core_pr_dump_initiator_port for ease of use

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: fix memory leak in lio_target_tiqn_addtpg()

[ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ]

tpg must free when call core_tpg_register() return fail

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()

[ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ]

Avoid that cmd->se_cmd.se_tfo is read after a command has already been
freed.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ipic: Fix status get and status clear

[ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ]

IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/opal: Fix EBUSY bug in acquiring tokens

[ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ]

The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.

This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.

Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipvs: Fix inappropriate output of procfs

[ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ]

Information about ipvs in different network namespace can be seen via procfs.

How to reproduce:

  # ip netns add ns01
  # ip netns add ns02
  # ip netns exec ns01 ip a add dev lo 127.0.0.1/8
  # ip netns exec ns02 ip a add dev lo 127.0.0.1/8
  # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80
  # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80

The ipvsadm displays information about its own network namespace only.

  # ip netns exec ns01 ipvsadm -Ln
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
  TCP  10.1.1.1:80 wlc

  # ip netns exec ns02 ipvsadm -Ln
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
  TCP  10.1.1.2:80 wlc

But I can see information about other network namespace via procfs.

  # ip netns exec ns01 cat /proc/net/ip_vs
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port Forward Weight ActiveConn InActConn
  TCP  0A010101:0050 wlc
  TCP  0A010102:0050 wlc

  # ip netns exec ns02 cat /proc/net/ip_vs
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port Forward Weight ActiveConn InActConn
  TCP  0A010102:0050 wlc

Signed-off-by: KUWAZAWA Takuya <albatross0@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo

[ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ]

The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which
returns the last frequency requested by the kernel, but may not
reflect the actual frequency the processor is running at. This patch
makes a call to cpufreq_get() instead which returns the current
frequency reported by the hardware.

Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()")
Signed-off-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PME: Handle invalid data when reading Root Status

[ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ]

PCIe PME and native hotplug share the same interrupt number, so hotplug
interrupts are also processed by PME. In some cases, e.g., a Link Down
interrupt, a device may be present but unreachable, so when we try to
read its Root Status register, the read fails and we get all ones data
(0xffffffff).

Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e.,
"some device has asserted PME," so we scheduled pcie_pme_work_fn(). This
caused an infinite loop because pcie_pme_work_fn() tried to handle PME
requests until PCI_EXP_RTSTA_PME is cleared, but with the link down,
PCI_EXP_RTSTA_PME can't be cleared.

Check for the invalid 0xffffffff data everywhere we read the Root Status
register.

1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from
non-existent devices") added similar checks in the hotplug driver.

Signed-off-by: Qiang Zheng <zhengqiang10@huawei.com>
[bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow
other similar checks]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type

[ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ]

The used 0x1f mask is only valid for am335x family of SoC, different family
using this type of crossbar might have different number of electable
events. In case of am43xx family 0x3f mask should have been used for
example.
Instead of trying to handle each family's mask, just use u8 type to store
the mux value since the event offsets are aligned to byte offset.

Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pcf8563: fix output clock rate

[ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ]

The pcf8563_clkout_recalc_rate function erroneously ignores the
frequency index read from the CLKO register and always returns
32768 Hz.

Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: au1200fb: Return an error code if a memory allocation fails

[ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ]

'ret' is known to be 0 at this point.
In case of memory allocation error in 'framebuffer_alloc()', return
-ENOMEM instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: au1200fb: Release some resources if a memory allocation fails

[ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ]

We should go through the error handling code instead of returning -ENOMEM
directly.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: udlfb: Fix read EDID timeout

[ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ]

While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.

Returned EDID is in second byte, so return error when less than two bytes
are received.

Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: controlfb: Add missing modes to fix out of bounds access

[ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ]

Dan's static analysis says:

drivers/video/fbdev/controlfb.c:560 control_setup()
error: buffer overflow 'control_mac_modes' 20 <= 21

Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.

The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:

https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad

Augment control_mac_modes[] with the two new video modes to fix this.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: don't warn on successful change of MAC

[ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ]

Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: fix race during implicit transition work flushes

[ Upstream commit 760bf578edf8122f2503a3a6a3f4b0de3b6ce0bb ]

This fixes the following races:

1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:

if (!explicit &&
atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
ALUA_ACCESS_STATE_TRANSITION) {

and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.

2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.

To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.

Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: fix ALUA transition timeout handling

[ Upstream commit d7175373f2745ed4abe5b388d5aabd06304f801e ]

The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Use system workqueue for ALUA transitions

[ Upstream commit 207ee84133c00a8a2a5bdec94df4a5b37d78881c ]

If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.

Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.

For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: add missing memset while reading compressed inline extents

[ Upstream commit e1699d2d7bf6e6cce3e1baff19f9dd4595a58664 ]

This is a story about 4 distinct (and very old) btrfs bugs.

Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).

Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1:  uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read.  The fix
was to add a memset in btrfs_get_extent to zero out the hole.

Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2:  compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases.  This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.

There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record.  This memset doesn't cover the region between the end of the
decompressed data and the end of the page.  It has also moved around a
few times over the years, so there's no single patch to refer to.

This patch fixes bug #3:  compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same:  zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.

The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern.  Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code.  In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.

A fast reproducer for bug #0 is presented below.  A few offending extents
are also created in the wild during large rsync transfers with the -S
flag.  A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well.  Once an offending
file is created, it can present different content to userspace each
time it is read.

Bug #0 is at least 4 and possibly 8 years old.  I verified every vX.Y
kernel back to v3.5 has this behavior.  There are fossil records of this
bug's effects in commits all the way back to v2.6.32.  I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.

It is not clear whether bug #0 is worth fixing.  A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.

Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak.  So enough about
bug #0, let's get back to bug #3 (this patch).

An example of on-disk structure leading to data corruption found in
the wild:

        item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
                inode generation 50 transid 50 size 47424 nbytes 49141
                block group 0 mode 100644 links 1 uid 0 gid 0
                rdev 0 flags 0x0(none)
        item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
                inode ref index 3 namelen 10 name: DB_File.so
        item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
                inline extent data size 1341 ram 4085 compress(zlib)
        item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
                extent data disk byte 5367308288 nr 20480
                extent data offset 0 nr 45056 ram 45056
                extent compression(zlib)

Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096.  The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.

Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:

Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:

# touch foo
# chattr +c foo
# xfs_io -f -c "pwrite -W 0 1000" foo
# xfs_io -f -c "falloc 4 8188" foo
# od -x foo
# echo 3 >/proc/sys/vm/drop_caches
# od -x foo

This produce the following on my box:

Correct output:  file contains 1000 data bytes followed
by zeros:

0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
0001760 0000 0000 0000 0000 0000 0000 0000 0000
*
0020000

Actual output:  the data after the first 1000 bytes
will be different each run:

0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
(...)

Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1 respect server's max size in CREATE_SESSION

[ Upstream commit 033853325fe3bdc70819a8b97915bd3bca41d3af ]

Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/esrt: Cleanup bad memory map log messages

[ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ]

The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:

efi: requested map not found.
esrt: ESRT header is not in the memory map.

Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.

Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.

Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf symbols: Fix symbols__fixup_end heuristic for corner cases

[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]

The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Avoid delays during VF driver device shutdown

[ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ]

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.

The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).

The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.

This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.

Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix afs_kill_pages()

[ Upstream commit 7286a35e893176169b09715096a4aca557e2ccd2 ]

Fix afs_kill_pages() in two ways:

(1) If a writeback has been partially flushed, then if we try and kill the
     pages it contains, some of them may no longer be undergoing writeback
     and end_page_writeback() will assert.

     Fix this by checking to see whether the page in question is actually
     undergoing writeback before ending that writeback.

(2) The loop that scans for pages to kill doesn't increase the first page
     index, and so the loop may not terminate, but it will try to process
     the same pages over and over again.

     Fix this by increasing the first page index to one after the last page
     we processed.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix page leak in afs_write_begin()

[ Upstream commit 6d06b0d25209c80e99c1e89700f1e09694a3766b ]

afs_write_begin() leaks a ref and a lock on a page if afs_fill_page()
fails. Fix the leak by unlocking and releasing the page in the error path.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Populate and use client modification time

[ Upstream commit ab94f5d0dd6fd82e7eeca5e7c8096eaea0a0261f ]

The inode timestamps should be set from the client time
in the status received from the server, rather than the
server time which is meant for internal server use.

Set AFS_SET_MTIME and populate the mtime for operations
that take an input status, such as file/dir creation
and StoreData. If an input time is not provided the
server will set the vnode times based on the current server
time.

In a situation where the server has some skew with the
client, this could lead to the client seeing a timestamp
in the future for a file that it just created or wrote.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix the maths in afs_fs_store_data()

[ Upstream commit 146a1192783697810b63a1e41c4d59fc93387340 ]

afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.

However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.

Fix by casting the operands to loff_t.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Prevent callback expiry timer overflow

[ Upstream commit 56e714312e7dbd6bb83b2f78d3ec19a404c7649f ]

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs_vnode record to use ktime_get_real_seconds() instead, for the
fields cb_expires and cb_expires_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Migrate vlocation fields to 64-bit

[ Upstream commit 8a79790bf0b7da216627ffb85f52cfb4adbf1e4e ]

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs's vlocation record to use ktime_get_real_seconds() instead, for the
fields time_of_death and update_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Flush outstanding writes when an fd is closed

[ Upstream commit 58fed94dfb17e89556b5705f20f90e5b2971b6a1 ]

Flush outstanding writes in afs when an fd is closed. This is what NFS and
CIFS do.

Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>