[RAMEN9610-12171] ion: remove unnecessary lock

Change-Id: I7acae56998ca14c44c5fde913c60312ec515dde4
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] ion: remove recursive lock

The oom notifiers is called from alloc_pages when the
memory exhausts. If the ion tries to memory allocation
with acquiring lock, and it happens out-of-memory, and
oom notifiers tries to the same lock, it makes recursive
lock.

Currently, ion_device->buffer_lock, ion_device->lock and
ion_heap->free_lock does not try to allocate memory but
buffer->lock tries to allocate memory, so we remove that
on oom notifier.

If that lock is removed, buffer->iovas and buffer->vaddr,
buffer->kmap_cnt can't be accessed because that requires
the lock to access without any synchronization problem.

Change-Id: Ie85038640d4bd271b28c993017fac865843ed83d
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] android: ion: add 'ion,hpa_limit' to dts

'ion,hpa_limit' property in 'ion-hpa-heap' node specifies the largest
address plus one that HPA can allocate. Therefore ion_hpa_heap should
not allocate pages from the physical address specified by
'ion,hpa_limit' to the end of possible physical address
(0xFFFF_FFFF_FFFF_FFFF).

Change-Id: I0c2cfdca1adbbf1c6602ebb3b68cc0cd5036854e
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[RAMEN9610-12171] ion: add heap debug node

This debug node show allocation status for heaps to
allocate contiguous memory to know memory fragmentation,
memory leak, or memory staticstics.

Change-Id: I99a74a695587ffea75dcd543b9d59fa94d757ead
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] ion: support dma_buf_[un]map_attachment_area

ion support to synchronize the buffer with as much
as the payload.

Change-Id: Ib7fb028d5372d528ae448215ff73704c84befa67
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] ion: protect buffer id by buffer_lock of device

The exynos_ion_alloc_fixup function set the id
for the buffer.

The buffer id must be unique. The ida library
does its own locking without special requirement
to support unique id.
However it is possible not to set the unique id
when the returned id is error by the ida full or
other reason, and the id is set as MAX_BUFFER_ID
and updates last_buffer_id as zero because that
critical region is not protected by lock.

Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>
Change-Id: Idf737b68995278a382c8db5708e13223f46dcf9f

[RAMEN9610-12171] ion: allocate zero for system heap id

Traditionally, the system heap is was always zero.
The heap id is created according to the registered order
after kernel 4.12, but the system heap is registered first
to provide compatibility with users to use the system heap.

Change-Id: I46f203a533f6c29b62ced6b49c0a5a5a98e2a914
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] ion: fix gen pool management leak for error

Change-Id: I09f6536f9f3e91e3d3598bcfbbbdd929a0558306
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171][COMMON] ion: add event log on debugfs

timestamp        type     heap            buffer_id  size       time   remarks
------------------------------------------------------------------------
[000113.120867]    alloc  ion_system_heap     1     32400        178   noncached
[000113.121074]     mmap  ion_system_heap     1     32400        521
[000113.121153]     free  ion_system_heap     1     32400      31555
[000113.526191]    alloc  ion_system_heap     2     32400        177   cached
[000113.526398]     mmap  ion_system_heap     2     32400        472

show the event for ion buffers when alloc, mmap,
free, cache maintenance, system mmu mapping with timestamp
until 1024 record.

Change-Id: Ia0a4c69e7509c2d4ae035ca8fa8ab90354708d9c
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12171] ion: attach prefix [Exynos][ION] to all error logs

Introducing four printk helper for ION driver
- perr: print logs in error level.
- perrfn: print logs with current function name.
- perrdev: print logs with devce name.
- perrfndev: print logs with current function name and device name.

All above macros attaches newline after the log.

Change-Id: Iabd441ff7b5b808baa832ec6ecf826b0e93e9a43
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-12143][9610] drivers: charger: enable irqs and add debug log

unmask bat, det_bat, ivr, micd irq and add the registers in test_read

Change-Id: I1fba531a2249a4aa35e013849601d12f84bb491e
Signed-off-by: Suji Lee <suji0908.lee@samsung.com>

[RAMEN9610-12132] vipx: add logs for debugging

Change-Id: I2ad36a3049c7e3a300987284c0c0e0ced44de4b9
Signed-off-by: Sanghwa Park <senius.park@samsung.com>

[RAMEN9610-12132] vipx: add suspend/resume interface

Change-Id: I52ce913fbac7ec3ceda1e426e33643eaef88603d
Signed-off-by: Sanghwa Park <senius.park@samsung.com>

[RAMEN9610-12132] vipx: add API to release kernel binary

Change-Id: Id55c6e9dc5d3356a5b70bb7f28dfa18e1bc6fd58
Signed-off-by: Sanghwa Park <senius.park@samsung.com>

[RAMEN9610-12105][COMMON] lib: Kconfig: Enable freq logging when MINIMIZE_MODE

Change-Id: I243195a5c40e8d007c859fe794dac817e287657a
Signed-off-by: Changki Kim <changki.kim@samsung.com>

[RAMEN9610-12100][COMMON] usb: gadget: remove unnecessary delay in functionfs bind

Change-Id: I8bb6d6c26e505abbc8fe1fc493983d71410459cf
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-12059] ccic : sync s2mu106 ccic code

Change-Id: I3fc4fee2eccd286d6dad4eab33746c2a30ba7261
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>

[RAMEN9610-11863][9610] drivers: fuelgauge: Maintain UI SOC by difference of SOC_R & raw SOC

Change-Id: I1237c6cd785a2ee7ba4d24b10aeaa5d0ea96f22b
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12054][COMMON] rtc: support s2mpu09 RTC alarm1 function

Alarm1 function allows the device to wake up from the power-off state.

Change-Id: I1dc648fba2e7639b1305466a7323d7552d16b002
Signed-off-by: Jieun Yi <jieun.yi@samsung.com>

[RAMEN9610-12050][common][9610] wlbt : enable NAPI & RPS with update host version 6.62.1

1. [9610] wlbt: delibrately panic kernel on fw panic
2. [9610] wlbt: [DO NOT MERGE UPSTREAM] enable NAPI
3. [9610] wlbt: Prevent issues in slsi_acs_init
4. [9610] wlbt: make mutex acquire safe in HIP
5. [9610] wlbt: update debug messages for hip4_mbulk_to_skb()
6. wlbt: Destroy Bluez workqueue on close
7. [9610][7885][7872][7570] wlbt: Passing Correct Request Id in CFG80211 ...
8. [9610] wlbt: Relax allocation in process context
9. [9610] wlbt: NAPI: fix broken HIP4 watchdog
10. [9610] wlbt: increment scsc_release to 6.62.1

Change-Id: I7acbea3ed623ab01df599781ed279bd3824f715b

[RAMEN9610-12039][9610] drivers, dts: add battery driver. DT for ERD.

Add new battery data DT, battery driver for S2MU004
base ERD

Change-Id: I3c03e6f47b57bf0761ebf374a6fb80cc463b06de
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12039][9610] drivers, include: sync power_supply

For the code sync with S2MU106, update power_supply.h

Change-Id: I90069b6c818413e4ab65871eb9d99176255bc883
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12039][9610] drivers: power: add s2mcs02 charger for code sync

Add s2mcs02 charger driver for code sync.

Change-Id: Ifb977b368d96262f85666eabbb401f83e6a54b7c
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12039][9610] drivers: power, led: add s2mu106 drivers for code sync

Add S2MU106 charger, fuelgauge, powermeter, FLED,
RGB LED, haptic driver for code sync.

Change-Id: Ib0dec6feed3aff93dfedbe8c15466218bab47ae5
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-12036][9610] media:radio: Change RDS RT validate condition

Change-Id: I3403c862ccac343d36fb0d8cc7aa09f86e8990e6
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11989][COMMON] muic: integrate MU004 and MU106

Change-Id: Iadc8acec977cd1675c03e628f1d70cdb9e02b5d4
Signed-off-by: Kim Taejeong <tj.kim@samsung.com>

[RAMEN9610-11989][COMMON] mfd: integrate MU004 and MU106

Change-Id: I8ec36e5eaa46df2b9a96e7f21eba925eb31cbbfc
Signed-off-by: Kim Taejeong <tj.kim@samsung.com>

[RAMEN9610-11980][COMMON] usb: gadget: add vendor specific command in mass storage

Change-Id: If8b4e8a89bbff020beee88618693514b61cffd22
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11980][COMMON] arm64: config: enable mass_storage for charging mode

Change-Id: I6ff2e94732e526e9543ff9be13b1ec9e7a55f04e
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11930] fbdev: dpu20: added frame rate information in psr_info

Change-Id: I12af987261cc24bbe5d87f7f75da4a6ed87f6efb
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-11923][COMMON] ASoC: abox: request dram during firmware execution

Firmware can access DRAM anytime but current source code
only request DRAM during DMA operation.

Change-Id: Ie3e8697c863281967aedeb645f886c747ed21e6a
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-11799][9610] media: radio: sync samsung/exynos9609

Change-Id: I33fed3e018a9a1d9db5c58b77cbc036ed5dc9a94
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11423][COMMON][MODAP-16389] gnss_if: fix wake_lock for iod

Change-Id: I48e72faa8f3a440364e067f5ce86fea314379c21
Signed-off-by: Soungkwan Kimn <sk.kimn@samsung.com>

[RAMEN9610-11423][COMMON][MODAP-16389] gnss_if: add sysfs for debug

Change-Id: I595973afea20ace6773d5caff433e75086418b0c
Signed-off-by: Soungkwan Kimn <sk.kimn@samsung.com>

[RAMEN9610-11413][COMMON][MODAP-16546] drivers: modem_if:  Open embms channel for network

Change-Id: I423b4314885af52e42570c961b360289e5b2d725
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-11292][9610] media: radio: Remove RDS debugging logs, Increase FM_RDS_MEM_SIZE_PARSER size to 2000

Change-Id: If0ff07353429238e6cd72360ba38d2ce0b994da1
Signed-off-by: Yunsu Kim <iamyunsu.kim@samsung.com>

[RAMEN9610-11757] irq/work: Improve the flag definitions

IRQ_WORK_FLAGS is defined simply to 3UL. This is confusing as it
says nothing about its purpose. Define IRQ_WORK_FLAGS as a bitwise
OR of IRQ_WORK_PENDING and IRQ_WORK_BUSY and change its name to
IRQ_WORK_CLAIMED.

While we're at it: use the BIT() macro for all flags.

Change-Id: Ie68d7f4a642fa160600bc329c8a7b580e9627a93
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515125996-21564-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

[RAMEN9610-11757] irq/work: Use llist_for_each_entry_safe

The llist_for_each_entry() loop in irq_work_run_list() is unsafe because
once the works PENDING bit is cleared it can be requeued on another CPU.

Use llist_for_each_entry_safe() instead.

Change-Id: I8680657f89c008f879b4e88e3499a7e44f2978a1
Fixes: 16c0890dc66d ("irq/work: Don't reinvent the wheel but use existing llist API")
Reported-by:Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Link: http://lkml.kernel.org/r/151027307351.14762.4611888896020658384@mail.alporthouse.com

[RAMEN9610-11757] irq/work: Don't reinvent the wheel but use existing llist API

Use the proper llist APIs instead of open-coded variants of them.

Change-Id: I66dd8fc945a5e2cebca80388d2887f7d6ef71988
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1509414414-14987-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

[RAMEN9610-11757] irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP

Commit 478850160636 ("irq_work: Implement remote queueing") provides
irq_work_on_queue() only for SMP builds.  However, providing it simplifies
code that submits irq_work to lists of CPUs, eliminating the !SMP special
cases.  This commit therefore maps irq_work_on_queue() to irq_work_on()
in !SMP builds, but validating the specified CPU.

Change-Id: I08c088556952a06471567c86c1993d41d971749a
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

[RAMEN9610-11731][common][9610] wlbt: Regulatory Rules should not be updated based on beacon hints.

CFG80211 Regulatory Rules should not be
updated based on beacon hints.

Correction for Config Name in Kconfig performed as well.

Change-Id: Ib30ffbf7459c6fb6b92dc8578b2cb3dbd4b1356b
SCSC-Bug-Id: SSB-47118
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>

[RAMEN9610-11727][HACK] g2d: lock memory frequency as 845Mhz

Change-Id: Id5f3f6c1f95f3ca39ab6fa0b63777f0384fc93b9
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>

[RAMEN9610-11727] g2d: remove use-after-free of context for performance

delayed work should not be called after device close.
However cancel_delayed_work() will cancel future invocations,
it does not guarantee it to be finished before cancel_delayed_work()
returns if delayed work is currently being processed.

Naive way to fix would be to change cancel_delayed_work into
cancle_delayed_work_sync. However it create a deadlock because
delayed work calls g2d_put_performance, which will wait on
g2d_dev->lock_qos. That mutex was already locked in
previously g2d_put_performance, which is waiting for
delayed work to finish.

So, use flush_delayed_work in g2d_release instead of
cancel_flush_work. Then, we don't request g2d_put_performance
in g2d_release because the request of performance always
have the delayed work to release the lock, so that must be
called before g2d context release.

Change-Id: I0c47ced4ca10c68f382c3f0a368f1bf16b7cd4b8
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>

[RAMEN9610-11639][COMMON] scsi: ufs: Print available lane for infomation

Change-Id: Icbc16b176d9966dc94613fbed6e1908b0b7c198d
Signed-off-by: JaeHun Jung <jh0801.jung@samsung.com>

[RAMEN9610-11637][COMMON] usb: host: re-initilize runtime pm

Change-Id: Ia630f71b0d1171e8dbeb73782ec0618d47a2bba4
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11637][COMMON] usb: host: allocate dma memory in booting time

Change-Id: If6dd884c7a8bedbddf81a97dcb48a94e18c634f8
Signed-off-by: taehyun.cho <taehyun.cho@samsung.com>

[RAMEN9610-11637][COMMON] usb: phy: add USB3.0 isolation feature

Change-Id: I9332363df4ceea63c60f2d9511fda670921e68ed
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11636][COMMON] mmc: dw_mmc: sdcard power off when to card detect

Change-Id: I9a53d9e51347d947d66d8648bc7f21d672d3e83c
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11636][9610] arm64: dts: enable skip init no card tray for sdcard

Change-Id: Id81a4c82446f555013968952d80cde51621a39e2
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11636][COMMON] mmc: dw_mmc: skip init when to not card tray.

Change-Id: I95cb1bb52c1937c7528b3367e308f791cea46663
Signed-off-by: dukhyun kwon <d_hyun.kwon@samsung.com>

[RAMEN9610-11578] arm64: dts: chub reserved memory size is modified

This patch reduces chub reserved memory from 512KB to 320KB

Change-Id: I464a9fb5342209453fc90155fee8b896e80e38f9
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[RAMEN9610-11577][COMMON] lib: dss: change dss virt-addr base

RAMEN/A9 assign a new reserved memory to the camera
library. It was created because there was a request
to match Makalu by moving virt-addr base of DSS area.

Change-Id: I295110f600385377275561c0b70ea8f5e2ce170f
Signed-off-by: Donghyeok Choe <d7271.choe@samsung.com>

[RAMEN9610-11577][COMMON] soc: samsung: change prototype chipid_board_id_show

Change-Id: Id45c26d4fa9d93be7eebc1ec05e7c17f763c208d
Signed-off-by: Sangwook Ju <sw.ju@samsung.com>

[RAMEN9610-11577][COMMON] soc: exynos-chipid: Add Board revision sysfs node

Change-Id: I407e2fbdeb876584b278a966ba74be6292683f01
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[RAMEN9610-11575] change iic div calculation formula for frquency not up to the set value

Change-Id: Ic6514913c0cb9062ef8daaffb433601f6dad6bb3

[RAMEN9610-11559][COMMON] spi: s3c64xx: Fix runtime PM feature for SPI driver

Add protection code for runtime pm at SPI driver.
Now spi driver waits for runtime_pm until recovers from
suspended mode.

Change-Id: I2402e4f13e92e3d941f0b2e91716558ad7ecc8d0
Signed-off-by: Kyungwoo Kang <kwoo.kang@samsung.com>

[RAMEN9610-11554][9610] soc: samsung: cal-if: Added cal_print_wakeup_reason.

Change-Id: I27f38d8896d07e7c368d35b77da7ae94fae51e1c
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-11479][9610] vipx: support ofi framework

  - add ofi framework support
  - remove reserved memory
  - enhance debug feture

Change-Id: I2b20c2872e264ef12ad264b23c1dc7027cb62ad8
Signed-off-by: Sanghwa Park <senius.park@samsung.com>

[RAMEN9610-11497][COMMON] arm64: dts: Add dbg-uart-ch property to serial_0 node

dbg-uart-ch property is used for lenovo uart console resume latency
issue in user binary.

Change-Id: I3060a96df912bc86bedee43b35fd126bd52600cf
Signed-off-by: myung-su.cha <myung-su.cha@samsung.com>

[RAMEN9610-11497][COMMMON] serial: samsung: Set default Baud rate as 115200

Abnormal resume latency issue in user binary is because Baud
rate is set 9600. To resolve this issue, this patch makes Baud
rate as 115200 when requested Baud rate is 0.

Change-Id: I71b54f2adc63f96032b9c628a5afb7e5e5377fc8
Signed-off-by: myung-su.cha <myung-su.cha@samsung.com>

[RAMEN9610-11632][9610] fimc-is2: add function for bts_update for thermal

 - update bts function for thermal

Change-Id: Ic7ea5c425a9a839bf4db2921d7d1458a50243b29
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-11632][COMMON] fimc-is2: add function for bts_update_scen when throttling state

 - when throttling state, need to adjust camera device's mo

Change-Id: Ibb4a463788e3cd41f217d1490af97cba7e5df3d5
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-11632][9610] bts: add scenario for thermal throttling

This patch adds scenario for thermal throttling.
The bandwidth of ISP blocks limited when thermal throttling.

Change-Id: If36c08fbbf8a74b144e28896b44e91b8b055bc3a
Signed-off-by: Taekki Kim <taekki.kim@samsung.com>

[RAMEN9610-11469][COMMON] usb: dwc3: change workqueue for connection stability

Change-Id: I8ec23741edd5c5a367e7996caf049814c389aaed
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-11232] cpufreq: acme: sync cur freq with resume freq when trying to suspend

Change-Id: I517c2c6116f8ceca91ba760743349e9af7f1eaf0
Signed-off-by: Choonghoon Park <choong.park@samsung.com>
Signed-off-by: Hyunju Kang <hjtop.kang@gmail.com>

[RAMEN9610-11445][9610] wlbt : update MAC addr scheme to avoid merge conflict

Read wifi/bt addr from utag

Change-Id: I34ceefe178bdd0c3285f1f1cc0b504991ee65fbb

[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1

1) Fix kernel panic in slsi_bt_send_frame
2) Fix memory leak in slsi_bt_send_frame
3) Rx: A-MSDU: handle alloc failure
4) fix broken HIP4 stats
5) Mac randomization through wificond
6) protect dynamic interface deletion with lock
7) delibrately panic kernel on fw panic
8) Prevent issue and Mac Randomization Fixes.
9) Claim wakelock around wlbtd netlink comms
10) Increase FW version Size to 128 bytes

Change-Id: I6af7b83548576a93e122865cec8490f42fb87264
Signed-off-by: Youngsoo <youngss.kim@samsung.com>

[RAMEN9610-10619][Common][9610] wlbt: [ACS] Rssi factor calculation issue.

Driver changes to calculate rssi factor for 2.4GHZ.

Change-Id: I3e091c379d4b2e62d51ea1e118569a5a58ea109c
SCSC-Bug-Id: SSB-47988
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10619][Robusta2][9610] wlbt: [ACS] Driver changes

Added support for ACS in driver.

Change-Id: Iad87233b170ea488656d92665bba1172353da0ec
SCSC-Bug-Id: SSB-47573
Signed-off-by: Himani Gupta <himani.g2@samsung.com>

[RAMEN9610-10479][Robusta2][9610] IB/hfi1: convert to debugfs_file_get() and -put()

Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() to the new debugfs_file_get() and
debugfs_file_put() API.

Change-Id: Ie1e7aead3bdbc674066e53b7a389993607518267
Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[RAMEN9610-10479][Robusta2][9610] wlbt: fix for kernel panic and changes for function improvement

1) generate sable tar on wifi disconnect
2) disable log collection for default
3) Memleaks and unexpected break fall through is fixed
4) Fix compile errors when various optional features disabled
5) Protect hip dereferencing
6) zero out BT/A-BOX ringbuffer on BT crash
7) Improve scsc_mx Makefile modules compatibility
8) CONTROL_ROAMING feature in FW
9) Improve collection speed
10)vif cleanup changes
11) Initialize g_spinlock lock

bugdb : REL-1633

Change-Id: Icda4e62b237e2a93251e7020c974be3bbb18b49f

[RAMEN9610-6379][9610]wlbt: change the path of wlan mac address
The address is no longer read from the partition, but from the file node

Change-Id: I3abd45f4dd44e9780d927edf038e234786e81585
Signed-off-by: avoid <bing3.lin@samsung.com>

Revert "[RAMEN9610-10521][9610] wlbt: fix for kernel panic and changes for function improvement"

This reverts commit 4a37fc74a2aef6e9f07b51da59c578c029661808.

Change-Id: I34ee87787ae3b0227d884fd11dc6d1a2594f0928

Revert "[RAMEN9610-10521] IB/hfi1: convert to debugfs_file_get() and -put()"

This reverts commit 444c51cb8ab6d30a289dad51df66a8aa29da551e.

Change-Id: I5955c0886c236dc859abbc763c03a354a305df89

Revert "[RAMEN9610-10619][Common][9610] wlbt: [ACS] Driver changes"

This reverts commit 7f2c81c9fee6e77c9284f7628c6af6bd4d0dfd49.

Change-Id: Icba6227fbe4a030a202d7af50bd49c624c9f8f95

Revert "[RAMEN9610-10619][Common][9610] wlbt: [ACS] Rssi factor calculation issue."

This reverts commit ed9173ce3a5b49984107d65d66ec758da44fbd07.

Change-Id: Id75b8ce543e86f9903065dacd876781f1e5955ae

Revert "[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1"

This reverts commit 65f890d52b3d98df8f78df9d23ef824933aac1dc.

Change-Id: Iaeb06044ae470e9f58d8462cc7b5c506af2ae5cc

[RAMEN9610-11229][COMMON][MODAP-16187] drivers: modem_if: Deliver AP crash status to CP

- Notify AP kernel panic status to CP
- Make CP crash when ITMON is caused by CP

Change-Id: I085a013a66df9d14b204259887d1f0b6690d42ee
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>

[RAMEN9610-11229][COMMON][MODAP-16187] drivers: modem_if: change time to wait init_cmpl

- Wait 15 seconds to receive CMD_PHONE_START from CP main firmware

Change-Id: Id5f37dc3b65e45e73b98b27a391cdf4ca1a28957
Signed-off-by: Namhyung Kim <nh78.kim@samsung.com>

[RAMEN9610-11198][COMMON] drivers: exynos-pm: print MIF_REQ owners

Change-Id: Icf2bdca6576f7d7576b2a0317cbb0fb38c2c7a2a
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[RAMEN9610-11198][9610] dts: add MIF_REQ owners PMU_STAT

Change-Id: Iba4b50b4883a6e1a24aad0e947bd622044eb1108
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[RAMEN9610-11181][common][9610] wlbt: Fix kernel panic and Update to 6.60.1

1) Fix kernel panic in slsi_bt_send_frame
2) Fix memory leak in slsi_bt_send_frame
3) Rx: A-MSDU: handle alloc failure
4) fix broken HIP4 stats
5) Mac randomization through wificond
6) protect dynamic interface deletion with lock
7) delibrately panic kernel on fw panic
8) Prevent issue and Mac Randomization Fixes.
9) Claim wakelock around wlbtd netlink comms
10) Increase FW version Size to 128 bytes

Change-Id: I2bf6b89666ee7d122088fbe31e569260bade02ec
Signed-off-by: Youngsoo <youngss.kim@samsung.com>

[RAMEN9610-11180] PM / sleep: fix unbalanced pm_runtime_enable while aborting suspend

The device can go direct to complete at __device_suspend and
device_resume if its driver has no callbacks. In that case,
pm_runtime_enable was called at device_resume without pm_runtime_disable
at __device_suspend when suspend was aborted at __devive_suspend
because of pending wakeups. It causes unbalanced pm_runtime_enable.

Change-Id: Iceec2a72efa7a15673663828e6e692ae6958ab28
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[RAMEN9610-11169][9610] clk: samsung: modified the MUX_CLKCMU_FSYS_BUS_USER always on

Due to SSS, this clock should not be oscclk.

Change-Id: Ic6f814d02186caa7672640a6deacc0a8cfb01b4b
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[RAMEN9610-11146][9610] Common: drivers: fuelgauge: fix CHARGE_COUNTER property

Change-Id: I9df77ce5a7176a79a40e2627c34b49ff980c7946
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>

[RAMEN9610-11143][9610] arm64: dts: fine tune gpu dvfs threshold and boosting condition

Change-Id: Ib5f4108f05bcaf43a5a55eea9b8b498ebb942e6e
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-11098][9610] arm64: dts: change dvfs frequency and minimum table

Change-Id: If6b5989cd261c241fd214a269b3daf225e84982e
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-11073][COMMON] ASoC: abox: change the pad retention setting

The reason for setting GPIO_MODE_DISPAUD_SYS_PWR_REG to 0 is
to make GPIO state to a specific value when powering down DISPAUD.
The default value of GPIO_MODE_DISPAUD_SYS_PWR_REG is 0,
so there is no need to set it.

Change-Id: I20832cfdaba9a2f04b0844f77e61b086b756b849
Signed-off-by: ShinHyung <s47.kang@samsung.com>

[RAMEN9610-10910][COMMON] arm64: defconfig: increase CMA memroy size

Change-Id: Ieccc3ee4a0814ddc643d273de8f8fb5753cda5ee
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>

[RAMEN9610-10881][9610][COMMON] dtsi: camera: remove pm property in camera devices

 - as kernel 4.14 includes pm control at sysmmu,
   duplicated pm domain property needed to removed.
   (fimc_is_sensorX, fimc_is, camerapp-gdc removed)

Change-Id: Ic51885e4dc759670909b8ca235178529a8d0417e
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: skip hw params fixup

If stream is active already, hw params shouldn't be changed
because H/W doesn't support runtime format change.

Change-Id: I51a8766820e565c1252c4e3f79c941d895123f54
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: remove GFP_KERNEL flag

GFP_ATOMIC shoudn't be used with GFP_KERNEL.

Change-Id: I5576be136b00436fe040bcd181070612e4a61601
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>

[RAMEN9610-10895][COMMON] ASoC: abox: removed memory allocation code using vzalloc function

to prevent lockup while fault hander running
removed memory allocation code

Change-Id: Id2a9fb94854804d408f88d821625801316ef12a0
Signed-off-by: Pilsun Jang <pilsun.jang@samsung.com>

[RAMEN9610-10889] fbdev: exynos: dpu: do not allow idle after dsim probe

Change-Id: I23481ed50809de5b84bebd20b9c3486c09674b8d
Signed-off-by: ChiHun Won <chihun.won@samsung.com>

[RAMEN9610-10884][COMMON] soc: cpupm: Do not allow idle util system initialization

Change-Id: Iccd6b703d564470f199375a2cfa75597973775b3
Signed-off-by: Hyunju Kang <hjtop.kang@gmail.com>

[RAMEN9610-10873][Common][9610] wlbt: scdeuled scan timing update

Scheduled scan timing update.

SCSC-Bug-Id: SSB-47291
Change-Id: I2b2346130d583c3df9178ad4354c1a21ea10aa46
Signed-off-by: Kavitha Velayutham <k.velayutham@samsung.com>

[RAMEN9610-10873][Common][9610] wlbt: Scheduled Scan Changes for Kernel 4.14.

Some new parameters have been introduced for
scheduled scan on higher kernel versions.
Hence for smooth functionality of scheduled
scan in driver, driver needs to set and
enable the newly introduced parameters as well.

Change-Id: I3ee13032fbdc4325c6fb5e5feaf309ecd56ae2b7
SCSC-Bug-Id: SSB-48178
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>

[RAMEN9610-10855] android: ion: fix missing alignment for CMA heap

CMA heap may have special alignment requirement but alignment to the
buffer allocation was missing for buffer length. Alignment to the base
address is correctly performed, by the way.

Change-Id: Ida598ac599e15f825c888aaa93aa5f5e6a2f248a
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[RAMEN9610-10826][9609] arm64: dtsi: modify the interactive governer clock in mali node

Change-Id: I6a486cddb97f6d0765b3d3fe1e76e475ade3eaf2
Signed-off-by: Seonghun, Kim <sh_ko.kim@samsung.com>

[RAMEN9610-10808][Common][9610] soc: samsung: cal-if: Added QCH WA of CPUCL0/1.

Change-Id: Id0e677568967c4282335c88f1cca85dc86fc030e
Signed-off-by: Jaejoon Yoo <joonyj7.yoo@samsung.com>