Martin Kepplinger [Thu, 3 Mar 2016 08:24:02 +0000 (09:24 +0100)]
iio: mma8452: avoid switching to active because of config change
The devices' config registers can only be changed in standby mode.
Up until now the driver just held the device *always* active, so for
changing a config it was *always* necessary to switch to standby.
For upcoming support for runtime pm, the device can as well be in standby
mode. Instead of putting runtime pm functions in there, just keep the
device in standby if it already is. This section is protected by a lock
after all.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Martin Kepplinger [Thu, 3 Mar 2016 08:24:01 +0000 (09:24 +0100)]
iio: mma8452: coding style fixes
fix checkpatch issues like "space before tabs", too long lines or alignment.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Thu, 3 Mar 2016 10:44:05 +0000 (11:44 +0100)]
iio:magnetometer:ak8975: power regulator support
Add support for an optional regulator which, if found into device-tree,
will power on device at probing time.
The regulator is declared into ak8975 DTS entry as a "vdd-supply" property.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Thu, 3 Mar 2016 10:44:04 +0000 (11:44 +0100)]
iio:magnetometer:ak8975: remove unused field
Remove unused struct ak8975_data attrs field.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Thu, 3 Mar 2016 10:44:03 +0000 (11:44 +0100)]
iio:magnetometer:ak8975: fix uninitialized chipset
ak_def_array bounds are not properly checked in case of ACPI matching
failure. GCC warns with the following message at line 799:
‘chipset’ may be used uninitialized in this function.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ludovic Desroches [Thu, 3 Mar 2016 16:09:14 +0000 (17:09 +0100)]
iio:adc:at91-sama5d2: fix identation
Remove some extra tabs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ludovic Desroches [Thu, 3 Mar 2016 16:09:13 +0000 (17:09 +0100)]
iio:adc:at91-sama5d2: fix typo
Fix typo in the name of a macro.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Tue, 1 Mar 2016 10:31:38 +0000 (11:31 +0100)]
iio:pressure:ms5611: oversampling rate support
Add support for setting and retrieving OverSampling Rate independently for
each of the temperature and pressure channels. This allows userspace to
fine tune hardware sampling process according to the following tradeoffs :
* the higher the OSR, the finer the resolution ;
* the higher the OSR, the lower the noise ;
BUT:
* the higher the OSR, the larger the drift ;
* the higher the OSR, the longer the response time, i.e. less samples per
unit of time.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Grégor Boirie [Tue, 1 Mar 2016 10:31:37 +0000 (11:31 +0100)]
iio:pressure:ms5611: complete DT support
Add device-tree ID tables and document bindings.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Sat, 5 Mar 2016 06:55:25 +0000 (22:55 -0800)]
iio: potentiometer: tpl0102: change i2c functionality return code
Change i2c_check_functionality condition check return from ENOTSUPP to
EOPNOTSUPP which is now the standard return code.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:22 +0000 (21:05 +0900)]
staging: wilc1000: use switch statement instead of multiple if statement
It is more readable than multiple if-else statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:21 +0000 (21:05 +0900)]
staging: wilc1000: remove unnecessary comments
This patch removes unnecessary comments because enum cfg_cmd_type
shows each command type without it.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:20 +0000 (21:05 +0900)]
staging: wilc1000: add enum cfg_type_cmd
This patch adds a new enum cfg_type_cmd to change hard-coded command
type.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:19 +0000 (21:05 +0900)]
staging: wilc1000: rename hardwareProductVersion in struct wilc_mac_cfg
This patch renames hardwareProductVersion to hw_product_version to avoid
camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:18 +0000 (21:05 +0900)]
staging: wilc1000: remove commented codes
This patch removes commented codes in struct wilc_cfg_str.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 12:05:17 +0000 (21:05 +0900)]
staging: wilc1000: use TAG_PARAM_OFFSET define
TAG_PARAM_OFFSET is defined at top of this file so that it is used
to simplify codes.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Wed, 2 Mar 2016 15:42:19 +0000 (21:12 +0530)]
staging: wilc1000: Remove a whitespace before parenthesis
Remove a whitespace before parenthesis "("
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 05:28:24 +0000 (14:28 +0900)]
staging: wilc1000: remove typedef from enum tenuConnectSts
This patch removes typedef from enum tenuConnectSts and renames it to
connect_status to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 05:28:23 +0000 (14:28 +0900)]
staging: wilc1000: remove unused define
This patch removes INFINITE_SLEEP_TIME that is not used in the driver,
so just remove it.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 05:28:22 +0000 (14:28 +0900)]
staging: wilc1000: remove typedef from sdio_cmd53_t
This patch removes typedef from struct sdio_cmd53_t and renames it to
sdio_cmd53.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 05:28:21 +0000 (14:28 +0900)]
staging: wilc1000: remove unnecessary comment codes
This patch removes unnecessary comment code in struct sdio_cmd53_t.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Thu, 3 Mar 2016 05:28:20 +0000 (14:28 +0900)]
staging: wilc1000: remove typedef from struct sdio_cmd52_t
This patch removes typedef from struct sdio_cmd52_t and renames it to
sdio_cmd52.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 23:53:30 +0000 (18:53 -0500)]
staging: lustre: do less intense allocating retry for ko2iblnd
ko2iblnd may retry too frequent for growing pools, all schedulers
are spinning if another thread is in progress of allocating a new
pool and can't finish right away because of high system load.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7054
Reviewed-on: http://review.whamcloud.com/16470
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 23:53:29 +0000 (18:53 -0500)]
staging: lustre: avoid intensive reconnecting for ko2iblnd
When there is a connection race between two nodes and one side
of the connection is rejected by the other side. o2iblnd will
reconnect immediately, this is going to generate a lot of
trashes if:
- race winner is slow and can't send out connecting request
in short time.
- remote side leaves a cmid in TIMEWAIT state, which will reject
future connection requests
To resolve this problem, this patch changed the reconnection
behave: reconnection is submitted by connd only if a zombie
connection is being destroyed and there is a pending
reconnection request for the corresponding peer.
Also, after a few rejections, reconnection will have a time
interval between each attempt.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7569
Reviewed-on: http://review.whamcloud.com/17892
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 23:53:28 +0000 (18:53 -0500)]
staging: lustre: check wr_id returned by ib_poll_cq
If ib_poll_cq returned +ve without initialising ib_wc::wr_id (bug
in driver), then o2iblnd will run into unpredictable situation
because ib_wc::wr_id may refer to stale tx/rx pointer in stack.
It indicates bug in HCA driver if this happened, ko2iblnd should
output console error then close current connection.
This patch could also be helpful for LU-5271
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-519
Reviewed-on: http://review.whamcloud.com/12747
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Oucharek [Wed, 2 Mar 2016 23:53:27 +0000 (18:53 -0500)]
staging: lustre: Change connect peer failed cleanup order
A race condition has been found where connd is cleaning up failed
connections, the peer ref counter goes to zero, but we stil have
a connecting counter > 0.
One possible race is when we are retrying a connection by
calling kiblnd_connect_peer() which itself fails and decrements
the peer ref counter and gets swapped out before it can decrement
the connecting counter. connd swaps in and cleans up the
connection where it sees a peer ref counter of 1 and a connecting
counter of 1. This will trigger the assert seen in LU-7210 when
it decrements the peer counter.
The solution: be sure to decrement the connecting counter
before decrementing the peer counter in the peer connect
failure path.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7210
Reviewed-on: http://review.whamcloud.com/17004
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 23:53:26 +0000 (18:53 -0500)]
staging: lustre: take extra refcount in kiblnd_connreq_done
refcount taken by cmid is not reliable after kiblnd_connreq_done
released the glock because this connection is visible to other
threads, another thread can find and close this connection right
after kiblnd_connreq_done released the glock, if kiblnd_cm_callback
for RDMA_CM_EVENT_DISCONNECTED is called, it can release the
connection refcount taken by cmid. It means the connection could be
destroyed before kiblnd_connreq_done() finish operations on it.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
ntel-bug-id: https://jira.hpdd.intel.com/browse/LU-7210
Reviewed-on: http://review.whamcloud.com/17527
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Wed, 2 Mar 2016 23:53:25 +0000 (18:53 -0500)]
staging: lustre: make ko2iblnd connect parameters persistent
Store map-on-demand and peertx credits in the peer, since the peer
is persistent. Also made sure that when assigning the parameters
received on the connection to the peer structure through create,
that if another peer is added before grabbing the lock we assign
these parameters to it as well.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3322
Reviewed-on: http://review.whamcloud.com/17074
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Filizetti [Wed, 2 Mar 2016 23:53:24 +0000 (18:53 -0500)]
staging: lustre: Support different ko2iblnd configs between systems
This patch adds suppoort for ko2iblnd to have different values for
peer_credits and map_on_demand between systems.
Signed-off-by: Jeremy Filizetti <jeremy.filizetti@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3322
Reviewed-on: http://review.whamcloud.com/11794
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Wed, 2 Mar 2016 19:16:37 +0000 (00:46 +0530)]
Staging: lustre: lnet: Remove and rename struct typedefs
Remove typedefs from structures stt_timer_t and lst_ping_data_t as typedef
for a structure type is not preferred. The suffix '_t' and the typedefs
are removed using coccinelle.
Script 1:
//Drop typedefs and '_t'
@r1@
type T;
@@
typedef struct { ... } T;
@script:python c1@
T2;
T << r1.T;
@@
if T[-2:] =="_t":
coccinelle.T2 = T[:-2];
print T
else:
coccinelle.T2=T;
@@
type r1.T;
identifier c1.T2;
@@
-typedef
struct
+ T2
{ ... }
-T
;
Script 2:
//Replacement
@@
typedef stt_timer_t;
typedef lst_ping_data_t;
@@
(
- stt_timer_t
+ struct stt_timer
|
- lst_ping_data_t
+ struct lst_ping_data
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Wed, 2 Mar 2016 20:02:14 +0000 (01:32 +0530)]
staging: lustre: llite: Remove unnecessary test in if condition
Remove unnecessary test on `rc` variable since it has already been
tested previously.
Fixes following smatch warning:
drivers/staging/lustre/lustre/llite/llite_lib.c:1331 ll_setattr_raw()
warn: we tested 'rc' before and it was 'false'
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Wed, 2 Mar 2016 22:02:03 +0000 (17:02 -0500)]
staging: lustre: change ibh_mrs from array to pointer
With the removal of PMR we no longer require ibh_mrs field
to be a array so change it to a simple pointer.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6850
Reviewed-on: http://review.whamcloud.com/15788
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Zago [Wed, 2 Mar 2016 22:02:02 +0000 (17:02 -0500)]
staging: lustre: corrected some typos and grammar errors
Cleanup various typos and grammar errors.
Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5710
Reviewed-on: http://review.whamcloud.com/12201
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Zago [Wed, 2 Mar 2016 22:02:01 +0000 (17:02 -0500)]
staging: lustre: make o2iblnd_cb.c local functions static
This reduces the code size by about 1KiB.
Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/11256
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Zago [Wed, 2 Mar 2016 22:02:00 +0000 (17:02 -0500)]
staging: lustre: make o2iblnd local functions static
This fixes sparse warnings such as:
.../o2iblnd.c:424:1: warning: symbol 'kiblnd_get_peer_info' was not declared.
Should it be static?
This reduces the code size by 400 bytes.
The body of "the_o2iblnd" was moved at the end of the file,
to avoid having to declare some static prototypes.
Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/11255
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Wed, 2 Mar 2016 22:01:59 +0000 (17:01 -0500)]
staging: lustre: reverse LNet and infinband header order
LNet is an abstraction built on top of network APIs such
as infiniband or TCP/IP layer. Since LNet is dependent
on these other layers we should ensure LNet headers
should always come after the infiniband header since the
infiniband headers can influence the LNet header
definitions.
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5140
Reviewed-on: http://review.whamcloud.com/10571
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Wed, 2 Mar 2016 22:01:58 +0000 (17:01 -0500)]
staging: lustre: fix framework.c issues found by Klocwork Insight tool
The functions sfw_test_buffers() and sfw_unload_test() from LNet
selftest both assume sfw_test_instance_t being passed in is never
null. This is corrected here.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Wed, 2 Mar 2016 22:01:57 +0000 (17:01 -0500)]
staging: lustre: fix conctl.c issues found by Klocwork Insight tool
The function lst_test_add_ioctl is always copying lstio_tes_param
from userland even if the user doesn't send this data to LNet
selftest. Only consider lstio_tes_param data if lstio_tes_param_len
is not zero.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Wed, 2 Mar 2016 22:01:56 +0000 (17:01 -0500)]
staging: lustre: fix api-ni.c issues found by Klocwork Insight tool
Pointer 'ni' checked for NULL at line 1569 may be passed to
function and may be dereferenced there by passing argument 1 to
function 'lnet_ni_notify_locked' at line 1621.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Wed, 2 Mar 2016 22:01:55 +0000 (17:01 -0500)]
staging: lustre: fix socklnd issues found by Klocwork Insight tool
Null pointer 'best_iface' that comes from line 802 may be
dereferenced at line 832.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Wed, 2 Mar 2016 22:01:54 +0000 (17:01 -0500)]
staging: lustre: bind socklnd peers to a specific CPT
Currently the socklnd driver doesn't support
CPT affinity for its peers. Binding peers to
a specific CPT and memory allocated to the
NUMA node belonging to the CPT should give a
performance boost.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7245
Reviewed-on: http://review.whamcloud.com/16710
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Yu [Wed, 2 Mar 2016 22:01:53 +0000 (17:01 -0500)]
staging: lustre: replace direct LNet HZ access with kernel APIs
On some customers' systems, the kernel was compiled with HZ defined
to 100, instead of 1000. This improves performance for HPC applications.
However, to use these systems with Lustre, customers have to re-build
Lustre for the kernel because Lustre directly uses the defined constant
HZ.
Since kernel 2.6.21, some non-HZ dependent timing APIs become non-
inline functions, which can be used in Lustre codes to replace the
direct HZ access.
These kernel APIs include:
jiffies_to_msecs()
jiffies_to_usecs()
jiffies_to_timespec()
msecs_to_jiffies()
usecs_to_jiffies()
timespec_to_jiffies()
And here are some samples of the replacement:
HZ -> msecs_to_jiffies(MSEC_PER_SEC)
n * HZ -> msecs_to_jiffies(n * MSEC_PER_SEC)
HZ / n -> msecs_to_jiffies(MSEC_PER_SEC / n)
n / HZ -> jiffies_to_msecs(n) / MSEC_PER_SEC
n / HZ * 1000 -> jiffies_to_msecs(n)
This patch replaces the direct HZ access in lnet module.
Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5443
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Wed, 2 Mar 2016 22:01:52 +0000 (17:01 -0500)]
staging: lustre: set task state before scheduling in lnet_sock_accept
In the original code change when libcfs_sock_accept() was made
into lnet_sock_accept() a call to set_current_state(TASK_INTERRUPTIBLE)
got dropped which was restored. For upstream this is an
optimization of calling init_waitqueue_entry() only if
accept() return -EAGAIN. Also we can remove setting the
task to TASK_RUNNING that is not needed.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6407
Reviewed-on: http://review.whamcloud.com/14265
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Wed, 2 Mar 2016 22:01:51 +0000 (17:01 -0500)]
staging: lustre: fix 'copy into fixed size buffer' errors
Fix 'copy into fixed size buffer' defects found by Coverity
version 6.0.3:
Copy into fixed size buffer (STRING_OVERFLOW)
The fixed-size string might be overrun by copying without
checking the length.
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2074
Reviewed-on: http://review.whamcloud.com/4154
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alyona Romanenko [Wed, 2 Mar 2016 22:01:50 +0000 (17:01 -0500)]
staging: lustre: issue in the offset in lnet match hash table
the offset in hash table is overflowed for no wildcard portal.
The offset for no wildcard has been corrected as for wildcard
in the LU-1622
Signed-off-by: Alyona Romanenko <alyona.romanenko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7774
Reviewed-on: http://review.whamcloud.com/18422
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olaf Weber [Wed, 2 Mar 2016 22:01:49 +0000 (17:01 -0500)]
staging: lustre: Use after free in lnet_ptl_match_delay()
In lnet_ptl_match_delay() we check msg->msg_rx_delayed to see whether
the message has been added to the delay queue. But this check is done
after lnet_ptl_unlock() and lnet_res_unlock(), and the message can be
processed and freed before the check.
Replace the check with checking rc against LNET_MATCHMD_NONE, which
is how the callers of lnet_ptl_match_delay() know whether the message
was added to the delay queue. To make this work we reset rc in the
loop when there was no match and the message hasn't been delayed. In
addition reorganize the code and add comments to clarify the logic.
In lnet_ptl_match_md() a similar msg->msg_rx_delayed is replaced for
the same reason.
Signed-off-by: Olaf Weber <olaf@sgi.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7324
Reviewed-on: http://review.whamcloud.com/17840
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Xi [Wed, 2 Mar 2016 22:01:48 +0000 (17:01 -0500)]
staging: lustre: remove annoying message in parse_nidrange
When setting TBF rules of jobid, parse_nidrange() prints warning
messages. However, this is unnecessary and annoying since paring
a TBF rule will always try to parse the jobid like a nid.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7647
Reviewed-on: http://review.whamcloud.com/17916
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Wed, 2 Mar 2016 22:01:47 +0000 (17:01 -0500)]
staging: lustre: return proper error code for LNet core
It is consider bad style in the linux kernel to
return -1 or a positive number for an error.
Instead return the appropriate error codes.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/17626
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Wed, 2 Mar 2016 22:01:46 +0000 (17:01 -0500)]
staging: lustre: Ignore hops if not explicitly set
Since the # of hops is not a mandatory parameter the LU-6060
patch will cause problems to already existing systems since it
changes the behavior by which a route is determined down.
To fix this case the # of hops now defaults to LNET_UNDEFINED_HOPS
if no hop count is specified.
LNET_UNDEFINED_HOPS is defined to ((__u32)-1). When it's printed as
%d, it displays as -1.
__u32 is used through out the call stack for hop count to explicitly
define the size of the hop count and to avoid any sizing issues when
passing data to and from the kernel.
To keep existing behavior both lnet_compare_routes() and LNetDist()
will treat undefined hop count as hop count 1.
When executing the logic in lnet_parse_rc_info() there is no
longer an assumption that the default hop count is 1. If
the hop count is 1 then it must've been explicitly set by
the user.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6851
Reviewed-on: http://review.whamcloud.com/15719
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 22:01:45 +0000 (17:01 -0500)]
staging: lustre: recv could access freed message
When lnet_parse_put calls lnet_ptl_match_md, this function can attach
current message on the delayed list if there is no match. It means
this message can be taken over and freed by another thread who is
posting new MD, then it is not safe for caller of lnet_parse_put to
check this message again.
This patch fixes this issue by adding a local variable "ready_delay"
to store corresponding status of lnet_msg, so lnet doesn't need to
check the message again if lnet_ptl_match_md returned MATCH_NONE for
it.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7324
Reviewed-on: http://review.whamcloud.com/17065
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Wed, 2 Mar 2016 22:01:44 +0000 (17:01 -0500)]
staging: lustre: set downis to 1 if there's no NI for remote net
lnet_route_t::lr_downis is marked as zero even if there is no NI to
target network, this is wrong and breaks logic of ARF. This patch
fixes this problem.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6060
Reviewed-on: http://review.whamcloud.com/13417
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Wed, 2 Mar 2016 13:25:39 +0000 (08:25 -0500)]
staging/lustre: Unbreak ll_prep_inode iget result check
commit
020ecc6f3229 ("staging: lustre: llite: Remove IS_ERR tests")
managed to break one of the converted checks by losing a dereference
causing the condition to be wrong and hence leading
to a crash later on in case of actual error.
IS_ERR_OR_NULL(*inode) got converted into !inode.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 2 Mar 2016 20:06:42 +0000 (12:06 -0800)]
Revert "staging/lustre: F_SETLKW64 F_SETLK64 F_GETLK64 are always defined"
This reverts commit
caa88c26575c9be856e5a801abd121d7ff0808f8.
Turns out that Alpha doesn't define these values :(
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Mon, 29 Feb 2016 13:53:44 +0000 (19:23 +0530)]
staging: wilc1000: wilc_wlan: Remove wrapper function
Remove is_tcp_ack_filter() which only returns the value of boolean
variable `enabled` by replacing the only call site with the variable
`enabled` itself.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Mon, 29 Feb 2016 09:02:39 +0000 (18:02 +0900)]
staging: wilc1000: wilc_wlan_if.h: remove unused functions
This patch removes the unused functions anymore related to the configuration
of the bus interface clock speed.
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sun, 28 Feb 2016 11:51:06 +0000 (17:21 +0530)]
staging: wilc1000: Removed unused variables
Variables pcgroup_encrypt_val,pccipher_group,pcwpa_version,
hold different values at different stages of the execution of
connect(), however they are not being used anywhere.
Hence, the unused variables have been removed.
This was done using Coccinelle.
@@ type T; identifier i; constant c; @@
-T i;
<... when != i
-i = c;
...>
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rehas Sachdeva [Fri, 26 Feb 2016 12:47:45 +0000 (18:17 +0530)]
staging: wilc1000: Remove unnecessary 'else'
This patch removes the checkpatch.pl warning:
else is not generally useful after a break or return
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 26 Feb 2016 07:03:42 +0000 (23:03 -0800)]
staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, and the #define.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 26 Feb 2016 07:02:59 +0000 (23:02 -0800)]
staging: wilc1000: remove code for HOST_IF_MSG_Q_IDLE
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, and the #define.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 26 Feb 2016 07:02:17 +0000 (23:02 -0800)]
staging: wilc1000: remove code for HOST_IF_MSG_FLUSH_CONNECT
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, and the #define.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 26 Feb 2016 07:01:13 +0000 (23:01 -0800)]
staging: wilc1000: remove code for HOST_IF_GET_LINKSPEED
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, the #define, and the link_speed var.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 26 Feb 2016 07:00:42 +0000 (23:00 -0800)]
staging: wilc1000: remove code for HOST_IF_MSG_GET_CHNL
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, the #define, and the channel var.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Tue, 1 Mar 2016 11:28:45 +0000 (16:58 +0530)]
Staging: lustre: Do not print message if kzalloc() failed.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 28 Feb 2016 19:44:33 +0000 (01:14 +0530)]
Staging: lustre: Remove print statement on function failure
The memory allocation functions generates a call stack containing
all the context information on failure, so print statements can be
removed on failure of these functions. Also remove
unwanted {} around if block after removal of these statements.
Done using coccinelle:
@@
expression e,e1,e2;
identifier x;
@@
e=\(kmalloc\|kmalloc_array\|kzalloc\|
devm_kzalloc\)(...);
...when!=e=e1
if(!e)
-{
- \(printk\|DBG_8723A\|pr_err\|CERROR\|DBG_88E\)(...);
(
goto x;
|
return e2;
|
return;
)
-}
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sun, 28 Feb 2016 09:16:56 +0000 (14:46 +0530)]
Staging: lustre: Remove int typecast of offsetof().
Remove int typecast of offsetof().
As per below coccinelle rule:
@@
type T;
expression E;
@@
- (int)(offsetof(T,E))
+ offsetof(T,E)
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Sun, 28 Feb 2016 19:09:12 +0000 (14:09 -0500)]
staging: lustre: lnet: Use list_entry() rather than container_of()
Use list_entry() rather than container_of() for nodes of doubly linked
lists.
Semantic patch used:
@a exists@
identifier var;
struct list_head *ptr;
@@
var =
- container_of
+ list_entry
(ptr, ...);
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Sun, 28 Feb 2016 13:55:23 +0000 (19:25 +0530)]
staging: lustre: lnet: Remove an error code indent should use tabs where possible
Remove space and use tabs for indent the code.
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tapan Prakash T [Sun, 28 Feb 2016 14:14:22 +0000 (19:44 +0530)]
drivers: staging: lustre: lustre: ptlrpc: Fix comment related coding style issue
Fixed checkpatch.pl warning 'Block comments use * on subsequent lines'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tapan Prakash T [Sun, 28 Feb 2016 14:34:15 +0000 (20:04 +0530)]
drivers: staging: lustre: lustre: ptlrpc: Fix space related coding style issue
Fixed checkpatch.pl warning space prohibited between function name and
open parenthesis '('
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 28 Feb 2016 14:26:22 +0000 (09:26 -0500)]
staging: lustre: Use __user for a pointer to a user space address
This commit corrects two sparse warnings caused by the lack of a __user
annotation for the third argument of the libcfs_ioctl_handle function.
module.c:165:68: warning: incorrect type in argument 1
(different address spaces)
module.c:165:68: expected void [noderef] <asn:1>*arg
module.c:165:68: got void *arg
module.c:209:47: warning: incorrect type in argument 3
(different address spaces)
module.c:209:47: expected void *arg
module.c:209:47: got void [noderef] <asn:1>*arg
The need to have the __user annotation is supported by the fact that
libcfs_ioctl_handle passes its third argument to a helper function
(libcfs_ioctl_popdata) which also has a __user annotation for its
corresponding argument.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 28 Feb 2016 14:26:21 +0000 (09:26 -0500)]
staging: lustre: Use const static file_operations struct
This commit corrects the following sparse warning regarding a
file_operations structure being non-static and constifies the
structure in question as well.
warning: symbol 'lprocfs_stats_seq_fops' was not declared.
Should it be static?
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sat, 27 Feb 2016 18:38:46 +0000 (00:08 +0530)]
staging: lustre: lnet: Use list_for_each_entry_safe
Doubly linked lists which are iterated using list_empty
and list_entry macros have been replaced with list_for_each_entry_safe macro.
This makes the iteration simpler and more readable.
This patch replaces the while loop containing list_empty and list_entry
with list_for_each_entry_safe.
This was done with Coccinelle.
@@
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
T *I1;
+ T *tmp;
...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
{
...when != T *I1;
- I1 = list_entry(E1.next, T, I2);
...
}
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Fri, 26 Feb 2016 16:36:06 +0000 (11:36 -0500)]
staging: lustre: update comment for lnet_lib_init/exit
The documentation about the return values for lnet_lib_init
and lnet_lib_exit was in the old style format. Bring it in
sync with the rest of the LNet core. Broken out of patch 16787.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Fri, 26 Feb 2016 16:36:05 +0000 (11:36 -0500)]
staging: lustre: make module_init/exit naming consistent
Make the name of the module_init()/_exit() functions consistently
{module_name}_init and {module_name}_exit.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Fri, 26 Feb 2016 16:36:04 +0000 (11:36 -0500)]
staging: lustre: update the MODULE_DESCRIPTION for all lustre modules
Fixup the MODULE_DESCRIPTION for several lustre modules. Some wrongly
place the version in the string or they are not descriptive enough.
Broken out of patch http://review.whamcloud.com/16787.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Fri, 26 Feb 2016 16:36:03 +0000 (11:36 -0500)]
staging: lustre: add missing MODULE_AUTHOR for LNet selftest module
For several lustre modules the MODULE_VERSION has the wrong value,
located in the wrong place in the source code, or completely missing.
This patch brings it up to date.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16729
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Fri, 26 Feb 2016 16:36:02 +0000 (11:36 -0500)]
staging: lustre: add missing MODULE_AUTHOR for LNet selftest module
For LNet selftest module the MODULE_AUTHOR was missing.
Add proper OpenSFS authorship. Broken out of patch
http://review.whamcloud.com/16787.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Fri, 26 Feb 2016 16:36:01 +0000 (11:36 -0500)]
staging: lustre: move module info to end of libcfs module.c file
Move the MODULE_* field in module.c that belongs to libcfs to the
end of the file like it is done for other kernel drivers.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:55:09 +0000 (14:25 +0530)]
staging: lustre: llite: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:55:02 +0000 (14:25 +0530)]
staging: lustre: ldlm: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:55 +0000 (14:24 +0530)]
staging: lustre: osc: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:48 +0000 (14:24 +0530)]
staging: lustre: ptlrpc: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:41 +0000 (14:24 +0530)]
staging: lustre: obdecho: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:35 +0000 (14:24 +0530)]
staging: lustre: lov: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:27 +0000 (14:24 +0530)]
staging: lustre: obdclass: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 26 Feb 2016 08:54:21 +0000 (14:24 +0530)]
staging: lustre: lclient: Replace kmem_cache_alloc with kmem_cache_zalloc
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kmem_alloc_zalloc sets allocated memory
to zero.
The Coccinelle semantic patch used to make this change is as
follows:
// <smpl>
@@
expression e,f;
@@
- kmem_cache_alloc(e, f |__GFP_ZERO)
+ kmem_cache_zalloc(e, f)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:13 +0000 (01:50 -0500)]
staging/lustre/ptlrpc: Fix ENABLE_PINGER ifdef
As it is ENABLE_PINGER is never defined, but in reality
it's the code that is now compiled out that should be used
since all other instances were converted like that too.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:12 +0000 (01:50 -0500)]
staging/lustre: Remove unneeded {} in lprocfs_stats_unlock()
Since there's only one call in those if () else branches, the
braces are not really necessary.
Highlighted by checkpatch.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:11 +0000 (01:50 -0500)]
staging/lustre: Rework MAX_DIO_SIZE macro
KMALLOC_MAX_SIZE is always defined in the kernel, so no point
in checking for it, just use t directly.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:10 +0000 (01:50 -0500)]
staging/lustre: Fix lines that start with spaces
Found with checkpatch.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:09 +0000 (01:50 -0500)]
staging/lustre/lmv: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:08 +0000 (01:50 -0500)]
staging/lustre/obdecho: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:07 +0000 (01:50 -0500)]
staging/lustre/mgc: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:06 +0000 (01:50 -0500)]
staging/lustre/mdc: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:05 +0000 (01:50 -0500)]
staging/lustre/lov: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:04 +0000 (01:50 -0500)]
staging/lustre/obdclass: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:03 +0000 (01:50 -0500)]
staging/lustre/osc: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:02 +0000 (01:50 -0500)]
staging/lustre/ptlrpc: Fix style vs open parenthesis alignment
This mostly fixes checkpatch complaints about
"Alignment should match open parenthesis"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:01 +0000 (01:50 -0500)]
staging/lustre: NEED_QUOTA_DEFS is never defined, drop it.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 26 Feb 2016 06:50:00 +0000 (01:50 -0500)]
staging/lustre: Remove RELEASEPAGE_ARG_TYPE compat macro
Not used in the kernel proper.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log