genirq: Fix race on spurious interrupt detection

commit 746a923b863a1065ef77324e1e43f19b1a3eab5c upstream.

Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:

a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
   woken.

However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter.  If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:

time
 |  irq_thread()
 |    irq_thread_fn()
 |      action->thread_fn()
 |      irq_finalize_oneshot()
 |        unmask_threaded_irq()            /* interrupt is unmasked */
 |
 |                  /* interrupt fires, incorrectly deemed spurious */
 |
 |    atomic_inc(&desc->threads_handled); /* counter is incremented */
 v

This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.

In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.

In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.

Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().

[ tglx: Folded change log update ]

Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Fix panic caused by passing log_buf_len to command line

commit 277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.

log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.

PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[    0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[    0.000000] Call Trace:
[    0.000000]  simple_strtoull+0x29/0x70
[    0.000000]  memparse+0x26/0x90
[    0.000000]  log_buf_len_setup+0x17/0x22
[    0.000000]  do_early_param+0x57/0x8e
[    0.000000]  parse_args+0x208/0x320
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_options+0x29/0x2d
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_param+0x36/0x4d
[    0.000000]  setup_arch+0x336/0x99e
[    0.000000]  start_kernel+0x6f/0x4ee
[    0.000000]  x86_64_start_reservations+0x24/0x26
[    0.000000]  x86_64_start_kernel+0x6f/0x72
[    0.000000]  secondary_startup_64+0xa4/0xb0

This patch adds a check to prevent the panic.

Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com
Cc: stable@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: on kerberos mount if server doesn't specify auth type use krb5

commit 926674de6705f0f1dbf29a62fd758d0977f535d6 upstream.

Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: do not attempt cifs operation in smb3 query info error path

commit 1e77a8c204c9d1b655c61751b8ad0fde22421dbb upstream.

If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.

We set backup intent on open so no need for this fallback.

See kernel bugzilla 201435

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: allow stats which track session and share reconnects to be reset

commit 2c887635cd6ab3af619dc2be94e5bf8f2e172b78 upstream.

Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts.  Fix it to
reset those as well.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: omap-hdq: fix missing bus unregister at removal

commit a007734618fee1bf35556c04fa498d41d42c7301 upstream.

The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this

[  127.842987] Unable to handle kernel paging request at virtual address bf01d04c
[  127.850646] pgd = 70e3cd9a
[  127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000
[  127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[  127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[  127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[  127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[  127.890441] PC is at 0xbf01d04c
[  127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[  127.898956] pc : [<bf01d04c>]    lr : [<c05f9580>]    psr: a0070013
[  127.905609] sp : cf885f48  ip : bf01d04c  fp : ddf1e11c
[  127.911132] r10: cf8fe040  r9 : c05f8d00  r8 : cf8fe040
[  127.916656] r7 : 000000f0  r6 : cf8fe02c  r5 : cf8fe000  r4 : cf8fe01c
[  127.923553] r3 : c05f8d00  r2 : 000000f0  r1 : cf8fe000  r0 : dde1ef10
[  127.930450] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  127.938018] Control: 10c5387d  Table: 8f8f0019  DAC: 00000051
[  127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[  127.951171] Stack: (0xcf885f48 to 0xcf886000)
[  127.955810] 5f40:                   cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[  127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[  127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[  127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[  127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[  128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118)
[  128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148)
[  128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[  128.037017] 5fa0:                                     00000000 00000000 00000000 00000000
[  128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  128.061340] Code: bad PC value
[  128.064697] ---[ end trace af066e33c0e14119 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: fix wrong channel number in triggered buffer mode

commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: fix acking DRDY irq on simple conversions

commit bc1b45326223e7e890053cf6266357adfa61942d upstream.

When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()

commit d3fa21c73c391975488818b085b894c2980ea052 upstream.

Leaving for_each_child_of_node loop we should release child device node,
if it is not stored for future use.

Found by Linux Driver Verification project (linuxtesting.org).

JC: I'm not sending this as a quick fix as it's been wrong for years,
but good to pick up for stable after the merge window.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 6df2e98c3ea56 ("iio: adc: Add imx25-gcq ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad5064: Fix regulator handling

commit 8911a43bc198877fad9f4b0246a866b26bb547ab upstream.

The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.

For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix kernel/bounds.c 'W=1' warning

commit 6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.

Building any configuration with 'make W=1' produces a warning:

kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]

When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.

Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.

Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix caching of host MDCR_EL2 value

commit da5a3ce66b8bb51b0ea8a89f42aac153903f90fb upstream.

At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.

Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.

Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.

Cc: Christopher Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 1e947bad0b63b351 ("arm64: KVM: Skip HYP setup when already running in HYP")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/rmap: map_pte() was not handling private ZONE_DEVICE page properly

commit aab8d0520e6e7c2a61f71195e6ce7007a4843afb upstream.

Private ZONE_DEVICE pages use a special pte entry and thus are not
present.  Properly handle this case in map_pte(), it is already handled in
check_pte(), the map_pte() part was lost in some rebase most probably.

Without this patch the slow migration path can not migrate back to any
private ZONE_DEVICE memory to regular memory.  This was found after stress
testing migration back to system memory.  This ultimatly can lead to the
CPU constantly page fault looping on the special swap entry.

Link: http://lkml.kernel.org/r/20181019160442.18723-3-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlbfs: dirty pages as they are added to pagecache

commit 22146c3ce98962436e401f7b7016a6f664c9ffb5 upstream.

Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts.  This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches.  When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.

This can be recreated as follows:
 fallocate -l 2M /dev/hugepages/foo
 echo 1 > /proc/sys/vm/drop_caches
 fallocate -l 2M /dev/hugepages/foo
 grep -i huge /proc/meminfo
   AnonHugePages:         0 kB
   ShmemHugePages:        0 kB
   HugePages_Total:    2048
   HugePages_Free:     2047
   HugePages_Rsvd:    18446744073709551615
   HugePages_Surp:        0
   Hugepagesize:       2048 kB
   Hugetlb:         4194304 kB
 ls -lsh /dev/hugepages/foo
   4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo

To address this issue, dirty pages as they are added to pagecache.  This
can easily be reproduced with fallocate as shown above.  Read faulted
pages will eventually end up being marked dirty.  But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.

Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com
Fixes: 6bda666a03f0 ("hugepages: fold find_or_alloc_pages into huge_no_page()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mihcla Hocko <mhocko@suse.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: fix showing large 'violations' or 'runtime_measurements_count'

commit 1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.

The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value.  Increase it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: /proc/pid/smaps_rollup: fix NULL pointer deref in smaps_pte_range()

commit fa76da461bb0be13c8339d984dcf179151167c8f upstream.

Leonardo reports an apparent regression in 4.19-rc7:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 6032 Comm: python Not tainted 4.19.0-041900rc7-lowlatency #201810071631
 Hardware name: LENOVO 80UG/Toronto 4A2, BIOS 0XCN45WW 08/09/2018
 RIP: 0010:smaps_pte_range+0x32d/0x540
 Code: 80 00 00 00 00 74 a9 48 89 de 41 f6 40 52 40 0f 85 04 02 00 00 49 2b 30 48 c1 ee 0c 49 03 b0 98 00 00 00 49 8b 80 a0 00 00 00 <48> 8b b8 f0 00 00 00 e8 b7 ef ec ff 48 85 c0 0f 84 71 ff ff ff a8
 RSP: 0018:ffffb0cbc484fb88 EFLAGS: 00010202
 RAX: 0000000000000000 RBX: 0000560ddb9e9000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000560ddb9e9 RDI: 0000000000000001
 RBP: ffffb0cbc484fbc0 R08: ffff94a5a227a578 R09: ffff94a5a227a578
 R10: 0000000000000000 R11: 0000560ddbbe7000 R12: ffffe903098ba728
 R13: ffffb0cbc484fc78 R14: ffffb0cbc484fcf8 R15: ffff94a5a2e9cf48
 FS:  00007f6dfb683740(0000) GS:ffff94a5aaf80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000f0 CR3: 000000011c118001 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  __walk_page_range+0x3c2/0x6f0
  walk_page_vma+0x42/0x60
  smap_gather_stats+0x79/0xe0
  ? gather_pte_stats+0x320/0x320
  ? gather_hugetlb_stats+0x70/0x70
  show_smaps_rollup+0xcd/0x1c0
  seq_read+0x157/0x400
  __vfs_read+0x3a/0x180
  ? security_file_permission+0x93/0xc0
  ? security_file_permission+0x93/0xc0
  vfs_read+0x8f/0x140
  ksys_read+0x55/0xc0
  __x64_sys_read+0x1a/0x20
  do_syscall_64+0x5a/0x110
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Decoded code matched to local compilation+disassembly points to
smaps_pte_entry():

        } else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap
                                                        && pte_none(*pte))) {
                page = find_get_entry(vma->vm_file->f_mapping,
                                                linear_page_index(vma, addr));

Here, vma->vm_file is NULL.  mss->check_shmem_swap should be false in that
case, however for smaps_rollup, smap_gather_stats() can set the flag true
for one vma and leave it true for subsequent vma's where it should be
false.

To fix, reset the check_shmem_swap flag to false.  There's also related
bug which sets mss->swap to shmem_swapped, which in the context of
smaps_rollup overwrites any value accumulated from previous vma's.  Fix
that as well.

Note that the report suggests a regression between 4.17.19 and 4.19-rc7,
which makes the 4.19 series ending with commit 258f669e7e88 ("mm:
/proc/pid/smaps_rollup: convert to single value seq_file") suspicious.
But the mss was reused for rollup since 493b0e9d945f ("mm: add
/proc/pid/smaps_rollup") so let's play it safe with the stable backport.

Link: http://lkml.kernel.org/r/555fbd1f-4ac9-0b58-dcd4-5dc4380ff7ca@suse.cz
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201377
Fixes: 493b0e9d945f ("mm: add /proc/pid/smaps_rollup")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Leonardo Soares Müller <leozinho29_eu@hotmail.com>
Tested-by: Leonardo Soares Müller <leozinho29_eu@hotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: tcrypt - fix ghash-generic speed test

commit 331351f89c36bf7d03561a28b6f64fa10a9f6f3a upstream.

ghash is a keyed hash algorithm, thus setkey needs to be called.
Otherwise the following error occurs:
$ modprobe tcrypt mode=318 sec=1
testing speed of async ghash-generic (ghash-generic)
tcrypt: test  0 (   16 byte blocks,   16 bytes per update,   1 updates):
tcrypt: hashing failed ret=-126

Cc: <stable@vger.kernel.org> # 4.6+
Fixes: 0660511c0bee ("crypto: tcrypt - Use ahash")
Tested-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: lrw - Fix out-of bounds access on counter overflow

commit fbe1a850b3b1522e9fc22319ccbbcd2ab05328d2 upstream.

When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).

Fixes: 64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <stable@vger.kernel.org> # 2.6.20+
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Guard against negative signal numbers in copy_siginfo_from_user32

commit a36700589b85443e28170be59fa11c8a104130a5 upstream.

While fixing an out of bounds array access in known_siginfo_layout
reported by the kernel test robot it became apparent that the same bug
exists in siginfo_layout and affects copy_siginfo_from_user32.

The straight forward fix that makes guards against making this mistake
in the future and should keep the code size small is to just take an
unsigned signal number instead of a signed signal number, as I did to
fix known_siginfo_layout.

Cc: stable@vger.kernel.org
Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/GenWQE: Fix sending of SIGKILL

commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.

The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another.  It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates.   Neither of which are
guaranteed to be true.

Therefore replace caching the task_struct of the opener with
pid of the openers thread group id.  All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.

Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.

The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV.  The exact same processess
will be killed just with less work, and less confusion.  The work done
by force_sig is really only needed for handling syncrhonous
exceptions.

It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: vmd: White list for fast interrupt handlers

commit a7f58b9ecfd3c0f63703ec10f4a592cc38dbd1b8 upstream.

Devices with slow interrupt handlers are significantly harming
performance when their interrupt vector is shared with a fast device.

Create a class code white list for devices with known fast interrupt
handlers and let all other devices share a single vector so that they
don't interfere with performance.

At the moment, only the NVM Express class code is on the list, but more
may be added if VMD users desire to use other low-latency devices in
these domains.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[lorenzo.pieralisi@arm.com: changelog]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jon Derrick: <jonathan.derrick@intel.com>
Cc: "Heitke, Kenneth" <kenneth.heitke@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk

commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream.

Add Device IDs to the Intel GPU "spurious interrupt" quirk table.

For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD.  Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.

The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.

[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU.  I hope
this is the last patch to add device IDs.]

Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Fix link_state teardown on device removal

commit aeae4f3e5c38d47bdaef50446dc0ec857307df68 upstream.

Upon removal of the last device on a bus, the link_state of the bridge
leading to that bus is sought to be torn down by having pci_stop_dev()
call pcie_aspm_exit_link_state().

When ASPM was originally introduced by commit 7d715a6c1ae5 ("PCI: add
PCI Express ASPM support"), it determined whether the device being
removed is the last one by calling list_empty() on the bridge's
subordinate devices list.  That didn't work because the device is only
removed from the list slightly later in pci_destroy_dev().

Commit 3419c75e15f8 ("PCI: properly clean up ASPM link state on device
remove") attempted to fix it by calling list_is_last(), but that's not
correct either because it checks whether the device is at the *end* of
the list, not whether it's the last one *left* in the list.  If the user
removes the device which happens to be at the end of the list via sysfs
but other devices are preceding the device in the list, the link_state
is torn down prematurely.

The real fix is to move the invocation of pcie_aspm_exit_link_state() to
pci_destroy_dev() and reinstate the call to list_empty().  Remove a
duplicate check for dev->bus->self because pcie_aspm_exit_link_state()
already contains an identical check.

Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: stable@vger.kernel.org # v2.6.26
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: dra7: Fix up unaligned access setting for PCIe EP

commit 6d0af44a82be87c13f2320821e9fbb8b8cf5a56f upstream.

Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.

Fixes: d23f3839fe97 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, skx_edac: Fix logical channel intermediate decoding

commit 8f18973877204dc8ca4ce1004a5d28683b9a7086 upstream.

The code "lchan = (lchan << 1) | ~lchan" for logical channel
intermediate decoding is wrong. The wrong intermediate decoding
result is {0xffffffff, 0xfffffffe}.

Fix it by replacing '~' with '!'. The correct intermediate
decoding result is {0x1, 0x2}.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Aristeu Rozanski <aris@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting

commit 432de7fd7630c84ad24f1c2acd1e3bb4ce3741ca upstream.

The count of errors is picked up from bits 52:38 of the machine check
bank status register. But this is the count of *corrected* errors. If an
uncorrected error is being logged, the h/w sets this field to 0. Which
means that when edac_mc_handle_error() is called, the EDAC core will
carefully add zero to the appropriate uncorrected error counts.

Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, amd64: Add Family 17h, models 10h-2fh support

commit 8960de4a5ca7980ed1e19e7ca5a774d3b7a55c38 upstream.

Add new device IDs for family 17h, models 10h-2fh.

This is required by amd64_edac_mod in order to properly detect PCI
device functions 0 and 6.

Signed-off-by: Michael Jin <mikhail.jin@gmail.com>
Reviewed-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180816192840.31166-1-mikhail.jin@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: fix potential Spectre v1

commit f11274396a538b31bc010f782e05c2ce3f804c13 upstream.

uref->usage_index can be indirectly controlled by userspace, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This field is used as an array index by the hiddev_ioctl_usage() function,
when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or
HIDIOCSUSAGES.

For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to
field->maxusage and then used as an index to dereference field->usage
array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where
uref->usage_index is checked against an array maximum value and then it is
used as an index in an array.

This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the
traditional Spectre V1 first load:

copy_from_user(uref, user_arg, sizeof(*uref))
if (uref->usage_index >= field->maxusage)
goto inval;
i = field->usage[uref->usage_index].collection_index;
return i;

This patch fixes this by sanitizing field uref->usage_index before using it
to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in
HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load.

Cc: <stable@vger.kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
v2: Contemplate cmd == HIDIOC{G,S}USAGES case
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free race in ext4_remount()'s error path

commit 33458eaba4dfe778a426df6a19b7aad2ff9f7eec upstream.

It's possible for ext4_show_quota_options() to try reading
s_qf_names[i] while it is being modified by ext4_remount() --- most
notably, in ext4_remount's error path when the original values of the
quota file name gets restored.

Reported-by: syzbot+a2872d6feea6918008a9@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR

commit 182a79e0c17147d2c2d3990a9a7b6b58a1561c7a upstream.

We return most failure of dquota_initialize() except
inode evict, this could make a bit sense, for example
we allow file removal even quota files are broken?

But it dosen't make sense to allow setting project
if quota files etc are broken.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix setattr project check in fssetxattr ioctl

commit dc7ac6c4cae3b58724c2f1e21a7c05ce19ecd5a8 upstream.

Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.

This patch try to follow same regular of xfs project
quota:

"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."

Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock, ext4_ioctl_setproject() is only used for
ioctl EXT4_IOC_FSSETXATTR, we have held mnt_want_write_file()
before ext4_ioctl_setflags(), and ext4_ioctl_setproject()
is called after ext4_ioctl_setflags(), we could share
codes, so remove it inside ext4_ioctl_setproject().

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: initialize retries variable in ext4_da_write_inline_data_begin()

commit 625ef8a3acd111d5f496d190baf99d1a815bd03e upstream.

Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2_meta: ->mount() can get NULL dev_name

commit 3df629d873f8683af6f0d34dfc743f637966d483 upstream.

get in sync with mount_bdev() handling of the same

Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix use after free in jbd2_log_do_checkpoint()

commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream.

The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:

CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
  __journal_try_to_free_buffer(bh)
  ...
  while (transaction->t_checkpoint_io_list)
  ...
    if (buffer_locked(bh)) {

<-- IO completes now, buffer gets unlocked -->

      spin_unlock(&journal->j_list_lock);
    spin_lock(&journal->j_list_lock);
    __jbd2_journal_remove_checkpoint(jh);
    spin_unlock(&journal->j_list_lock);
  try_to_free_buffers(page);
      get_bh(bh) <-- accesses freed bh

Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.

Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix MR cache initialization

commit 013c2403bf32e48119aeb13126929f81352cc7ac upstream.

Schedule MR cache work only after bucket was initialized.

Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: intel: skylake: Add missing break in skl_tplg_get_token()

commit 9c80c5a8831471e0a3e139aad1b0d4c0fdc50b2f upstream.

skl_tplg_get_token() misses a break in the big switch() block for
SKL_TKN_U8_CORE_ID entry.
Spotted nicely by -Wimplicit-fallthrough compiler option.

Fixes: 6277e83292a2 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm, region: Fail badblocks listing for inactive regions

commit 5d394eee2c102453278d81d9a7cf94c80253486a upstream.

While experimenting with region driver loading the following backtrace
was triggered:

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 [..]
 Call Trace:
  dump_stack+0x85/0xcb
  register_lock_class+0x571/0x580
  ? __lock_acquire+0x2ba/0x1310
  ? kernfs_seq_start+0x2a/0x80
  __lock_acquire+0xd4/0x1310
  ? dev_attr_show+0x1c/0x50
  ? __lock_acquire+0x2ba/0x1310
  ? kernfs_seq_start+0x2a/0x80
  ? lock_acquire+0x9e/0x1a0
  lock_acquire+0x9e/0x1a0
  ? dev_attr_show+0x1c/0x50
  badblocks_show+0x70/0x190
  ? dev_attr_show+0x1c/0x50
  dev_attr_show+0x1c/0x50

This results from a missing successful call to devm_init_badblocks()
from nd_region_probe(). Block attempts to show badblocks while the
region is not enabled.

Fixes: 6a6bef90425e ("libnvdimm: add mechanism to publish badblocks...")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm: Hold reference on parent while scheduling async init

commit b6eae0f61db27748606cc00dafcfd1e2c032f0a5 upstream.

Unlike asynchronous initialization in the core we have not yet associated
the device with the parent, and as such the device doesn't hold a reference
to the parent.

In order to resolve that we should be holding a reference on the parent
until the asynchronous initialization has completed.

Cc: <stable@vger.kernel.org>
Fixes: 4d88a97aa9e8 ("libnvdimm: ...base ... infrastructure")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-dma: fix incomplete configuration in cyclic mode

commit e57cb3b3f10d005410f09d4598cc6d62b833f2b0 upstream.

When in cyclic mode, the configuration is updated after having started the
DMA hardware (STM32_DMA_SCR_EN) leading to incomplete configuration of
SMxAR registers.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ppc4xx: fix off-by-one build failure

commit 27d8d2d7a9b7eb05c4484b74b749eaee7b50b845 upstream.

There are two poly_store, but one should have been poly_show.

|adma.c:4382:16: error: conflicting types for 'poly_store'
| static ssize_t poly_store(struct device_driver *dev, const char *buf,
|                ^~~~~~~~~~
|adma.c:4363:16: note: previous definition of 'poly_store' was here
| static ssize_t poly_store(struct device_driver *dev, char *buf)
|                ^~~~~~~~~~

CC: stable@vger.kernel.org
Fixes: 13efe1a05384 ("dmaengine: ppc4xx: remove DRIVER_ATTR() usage")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv4: defensive cipso option parsing

commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.

commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.

Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream.

The rs_rate_from_ucode_rate() function may return -EINVAL if the rate
is invalid, but none of the callsites check for the error, potentially
making us access arrays with index IWL_RATE_INVALID, which is larger
than the arrays, causing an out-of-bounds access.  This will trigger
KASAN warnings, such as the one reported in the bugzilla issue
mentioned below.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround"

commit afc92514a34c7414b28047b1205a6b709103c699 upstream.

If the "workaround_for_vbus" is true, the driver will not call
usb_disconnect(). So, since the controller keeps some registers'
value, the driver doesn't re-enumarate suitable speed after
the b-device mode is disabled. To fix the issue, this patch
adds usb_disconnect() calling in renesas_usb3_b_device_write()
if workaround_for_vbus is true.

Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten

commit e28fd56ad5273be67d0fae5bedc7e1680e729952 upstream.

In rmmod path, usbip_vudc does platform_device_put() twice once from
platform_device_unregister() and then from put_vudc_device().

The second put results in:

BUG kmalloc-2048 (Not tainted): Poison overwritten error or
BUG: KASAN: use-after-free in kobject_put+0x1e/0x230 if KASAN is
enabled.

[  169.042156] calling  init+0x0/0x1000 [usbip_vudc] @ 1697
[  169.042396] =============================================================================
[  169.043678] probe of usbip-vudc.0 returned 1 after 350 usecs
[  169.044508] BUG kmalloc-2048 (Not tainted): Poison overwritten
[  169.044509] -----------------------------------------------------------------------------
...
[  169.057849] INFO: Freed in device_release+0x2b/0x80 age=4223 cpu=3 pid=1693
[  169.057852]  kobject_put+0x86/0x1b0
[  169.057853]  0xffffffffc0c30a96
[  169.057855]  __x64_sys_delete_module+0x157/0x240

Fix it to call platform_device_del() instead and let put_vudc_device() do
the platform_device_put().

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas: don't set URB_ZERO_PACKET on IN USB transfer

commit 6528d88047801b80d2a5370ad46fb6eff2f509e0 upstream.

The USB core gets rightfully upset:

  usb 1-1: BOGUS urb flags, 240 --> 200
  WARNING: CPU: 0 PID: 60 at drivers/usb/core/urb.c:503 usb_submit_urb+0x2f8/0x3ed
  Modules linked in:
  CPU: 0 PID: 60 Comm: kworker/0:3 Not tainted 4.19.0-rc6-00319-g5206d00a45c7 #39
  Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
  Workqueue: events request_firmware_work_func
  EIP: usb_submit_urb+0x2f8/0x3ed
  Code: 75 06 8b 8f 80 00 00 00 8d 47 78 89 4d e4 89 55 e8 e8 35 1c f6 ff 8b 55 e8 56 52 8b 4d e4 51 50 68 e3 ce c7 c0 e8 ed 18 c6 ff <0f> 0b 83 c4 14 80 7d ef 01 74 0a 80 7d ef 03 0f 85 b8 00 00 00 8b
  EAX: 00000025 EBX: ce7d4980 ECX: 00000000 EDX: 00000001
  ESI: 00000200 EDI: ce7d8800 EBP: ce7f5ea8 ESP: ce7f5e70
  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00210292
  CR0: 80050033 CR2: 00000000 CR3: 00e80000 CR4: 00000090
  Call Trace:
   ? if_usb_fw_timeo+0x64/0x64
   __if_usb_submit_rx_urb+0x85/0xe6
   ? if_usb_fw_timeo+0x64/0x64
   if_usb_submit_rx_urb_fwload+0xd/0xf
   if_usb_prog_firmware+0xc0/0x3db
   ? _request_firmware+0x54/0x47b
   ? _request_firmware+0x89/0x47b
   ? if_usb_probe+0x412/0x412
   lbs_fw_loaded+0x55/0xa6
   ? debug_smp_processor_id+0x12/0x14
   helper_firmware_cb+0x3c/0x3f
   request_firmware_work_func+0x37/0x6f
   process_one_work+0x164/0x25a
   worker_thread+0x1c4/0x284
   kthread+0xec/0xf1
   ? cancel_delayed_work_sync+0xf/0xf
   ? kthread_create_on_node+0x1a/0x1a
   ret_from_fork+0x2e/0x38
  ---[ end trace 3ef1e3b2dd53852f ]---

Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pvh: don't try to unplug emulated devices

commit e6111161c0a02d58919d776eec94b313bb57911f upstream.

A Xen PVH guest has no associated qemu device model, so trying to
unplug any emulated devices is making no sense at all.

Bail out early from xen_unplug_emulated_devices() when running as PVH
guest. This will avoid issuing the boot message:

[    0.000000] Xen Platform PCI: unrecognised magic value

Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pvh: increase early stack size

commit 7deecbda3026f5e2a8cc095d7ef7261a920efcf2 upstream.

While booting on an AMD EPYC box the stack canary would detect stack
overflows when using the current PVH early stack size (256). Switch to
using the value defined by BOOT_STACK_SIZE, which prevents the stack
overflow.

Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: make xen_qlock_wait() nestable

commit a856531951dc8094359dfdac21d59cee5969c18e upstream.

xen_qlock_wait() isn't safe for nested calls due to interrupts. A call
of xen_qlock_kick() might be ignored in case a deeper nesting level
was active right before the call of xen_poll_irq():

CPU 1:                                   CPU 2:
spin_lock(lock1)
                                         spin_lock(lock1)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                            Interrupt happens
spin_unlock(lock1)
-> xen_qlock_kick(CPU 2)
spin_lock_irqsave(lock2)
                                         spin_lock_irqsave(lock2)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                               clears kick for lock1
                                            -> xen_poll_irq()
spin_unlock_irq_restore(lock2)
-> xen_qlock_kick(CPU 2)
                                            wakes up
                                         spin_unlock_irq_restore(lock2)
                                         IRET
                                           resumes in xen_qlock_wait()
                                           -> xen_poll_irq()
                                           never wakes up

The solution is to disable interrupts in xen_qlock_wait() and not to
poll for the irq in case xen_qlock_wait() is called in nmi context.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix race in xen_qlock_wait()

commit 2ac2a7d4d9ff4e01e36f9c3d116582f6f655ab47 upstream.

In the following situation a vcpu waiting for a lock might not be
woken up from xen_poll_irq():

CPU 1:                CPU 2:                      CPU 3:
takes a spinlock
                      tries to get lock
                      -> xen_qlock_wait()
frees the lock
-> xen_qlock_kick(cpu2)
                        -> xen_clear_irq_pending()

takes lock again
                                                  tries to get lock
                                                  -> *lock = _Q_SLOW_VAL
                        -> *lock == _Q_SLOW_VAL ?
                        -> xen_poll_irq()
frees the lock
-> xen_qlock_kick(cpu3)

And cpu 2 will sleep forever.

This can be avoided easily by modifying xen_qlock_wait() to call
xen_poll_irq() only if the related irq was not pending and to call
xen_clear_irq_pending() only if it was pending.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: Support xend-based toolstack

commit 3aa6c19d2f38be9c6e9a8ad5fa8e3c9d29ee3c35 upstream.

Xend-based toolstacks don't have static-max entry in xenstore. The
equivalent node for those toolstacks is memory_static_max.

Fixes: 5266b8e4445c (xen: fix booting ballooned down hvm guest)
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.13
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkfront: avoid NULL blkfront_info dereference on device removal

commit f92898e7f32e3533bfd95be174044bc349d416ca upstream.

If a block device is hot-added when we are out of grants,
gnttab_grant_foreign_access fails with -ENOSPC (log message "28
granting access to ring page") in this code path:

  talk_to_blkback ->
setup_blkring ->
xenbus_grant_ring ->
gnttab_grant_foreign_access

and the failing path in talk_to_blkback sets the driver_data to NULL:

 destroy_blkring:
        blkif_free(info, 0);

        mutex_lock(&blkfront_mutex);
        free_info(info);
        mutex_unlock(&blkfront_mutex);

        dev_set_drvdata(&dev->dev, NULL);

This results in a NULL pointer BUG when blkfront_remove and blkif_free
try to access the failing device's NULL struct blkfront_info.

Cc: stable@vger.kernel.org # 4.5 and later
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Restore functionality to xen vtpm driver.

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream.

Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a8b
("xenbus_client: Extend interface to support multi-page ring").

In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.

A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:

<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62

<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts

This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.

Daniel De Graaf formulated the fix by code inspection after the
regression point was located.

Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

xen-swiotlb: use actually allocated size on check physical continuous

commit 7250f422da0480d8512b756640f131b9b893ccda upstream.

xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the
order of the pages and not size argument (bytes). This is inconsistent with
range_straddles_page_boundary and memset which use the 'size' value,
which may lead to not exchanging memory with Xen (range_straddles_page_boundary()
returned true). And then the call to xen_swiotlb_free_coherent() would
actually try to exchange the memory with Xen, leading to the kernel
hitting an BUG (as the hypercall returned an error).

This patch fixes it by making the 'size' variable be of the same size
as the amount of memory allocated.

CC: stable@vger.kernel.org
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christoph Helwig <hch@lst.de>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: John Sobecki <john.sobecki@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250

commit 645b23da6f8b47f295fa87051335d41d139717a5 upstream.

1 GHz CPU OPP is the default boot value for the Exynos5250 SOC, so mark it
as suspend OPP. This fixes suspend/resume on Samsung Exynos5250 Snow
Chomebook, which was broken since switching to generic cpufreq-dt driver
in v4.3.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings

commit eb9e16d8573e243f8175647f851eb5085dbe97a4 upstream.

Convert Exynos5250 to OPP-v2 bindings. This is a preparation to add proper
support for suspend operation point, which cannot be marked in opp-v1.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: exynos: Add missing cooling device properties for CPUs

commit 672f33198bee21ee91e6af2cb8f67cfc8bc97ec1 upstream.

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes

commit cd6f55457eb449a388e793abd676e3a5b73510bc upstream.

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to account IO correctly

commit 4c58ed076875f36dae0f240da1e25e99e5d4afb8 upstream.

Below race can cause reversed reference on dirty count, fix it by
relocating __submit_bio() and inc_page_count().

Thread A Thread B
- f2fs_inplace_write_data
 - f2fs_submit_page_bio
  - __submit_bio
- f2fs_write_end_io
 - dec_page_count
  - inc_page_count

Cc: <stable@vger.kernel.org>
Fixes: d1b3e72d5490 ("f2fs: submit bio of in-place-update pages")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "f2fs: fix to clear PG_checked flag in set_page_dirty()"

commit 164a63fa6b384e30ceb96ed80bc7dc3379bc0960 upstream.

This reverts commit 66110abc4c931f879d70e83e1281f891699364bf.

If we clear the cold data flag out of the writeback flow, we can miscount
-1 by end_io, which incurs a deadlock caused by all I/Os being blocked during
heavy GC.

Balancing F2FS Async:
 - IO (CP:    1, Data:   -1, Flush: (   0    0    1), Discard: (   ...

GC thread:                              IRQ
- move_data_page()
 - set_page_dirty()
  - clear_cold_data()
                                        - f2fs_write_end_io()
                                         - type = WB_DATA_TYPE(page);
                                           here, we get wrong type
                                         - dec_page_count(sbi, type);
 - f2fs_wait_on_page_writeback()

Cc: <stable@vger.kernel.org>
Reported-and-Tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix AMD Family 0x17 msr_pstate size

[ Upstream commit 8c22e2f695920ebd94f9a53bcf2a65eb36d4dba1 ]

The msr_pstate data is only 63 bits long and should be 64 bits.

Add in the missing bit from res1 for AMD Family 0x17.

Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Check the non-cached stream buffers more explicitly

[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ]

Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.

Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rxe: fix for duplicate request processing and ack psns

[ Upstream commit b97db58557f4aa6d9903f8e1deea6b3d1ed0ba43 ]

Don't reset the resp opcode for a replayed read response.
The resp opcode could be in the middle of a write or send
sequence, when the duplicate read request was received.
An example sequence is as follows:
- Receive read request for 12KB PSN 20. Transmit read response
  first, middle and last with PSNs 20,21,22.
- Receive write first PSN 23.
  At this point the resp psn is 24 and resp opcode is write first.
- The sender notices that PSN 20 is dropped and retransmits.
  Receive read request for 12KB PSN 20. Transmit read response
  first, middle and last with PSNs 20,21,22. The resp opcode is
  set to -1, the resp psn remains 24.
- Receive write first PSN 23. This is processed by duplicate_request().
  The resp opcode remains -1 and resp psn remains 24.
- Receive write middle PSN 24. check_op_seq() reports a missing
  first error since the resp opcode is -1.

When sending an ack for a duplicate send or write request,
use the psn of the previous ack sent. Do not use the psn
of a read response for the ack.
An example sequence is as follows:
- Receive write PSN 30. Transmit ACK for PSN 30.
- Receive read request 4KB PSN 31. Transmit read response with
  PSN 31. The resp psn is now 32.
- The sender notices that PSN 30 is dropped and retransmits.
  Receive write PSN 30. duplicate_request() sends an ACK with
  PSN 31. That is incorrect since PSN 31 was a read request.

Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dma-jz4780: Return error if not probed from DT

[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ]

The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: menelaus: Fix possible race condition and leak

[ Upstream commit 9612f8f503804d2fd2f63aa6ba1e58bba4612d96 ]

The IRQ work is added before the struct rtc is allocated and registered,
but this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before calling menelaus_add_irq_work.

Also, this solves a possible leak as the RTC is never released.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init

[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]

Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel.  A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.

Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: report error if quota off error during umount

[ Upstream commit cda9cc595f0bb6ffa51a4efc4b6533dfa4039b4c ]

Now, we depend on fsck to ensure quota file data is ok,
so we scan whole partition if checkpoint without umount
flag. It's same for quota off error case, which may make
quota file data inconsistent.

generic/019 reports below error:

 __quota_error: 1160 callbacks suppressed
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds.  Have a nice day...

If we failed in below path due to fail to write dquot block, we will miss
to release quota inode, fix it.

- f2fs_put_super
 - f2fs_quota_off_umount
  - f2fs_quota_off
   - f2fs_quota_sync   <-- failed
   - dquot_quota_off   <-- missed to call

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct race with abort on completion path

[ Upstream commit ca7fb76e091f889cfda1287c07a9358f73832b39 ]

On io completion, the driver is taking an adapter wide lock and nulling the
scsi command back pointer.  The nulling of the back pointer is to signify the
io was completed and the scsi_done() routine was called.  However, the routine
makes no check to see if the abort routine had done the same thing and
possibly nulled the pointer. Thus it may doubly-complete the io.

Make the following mods:

- Check to make sure forward progress (call scsi_done()) only happens if the
  command pointer was non-null.

- As the taking of the lock, which is adapter wide, is very costly on a system
  under load, null the pointer using an xchg operation rather than under lock.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct soft lockup when running mds diagnostics

[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]

When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".

Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio: ensure class is registered before devices

[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]

When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.

This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.

The trace looks like that:

Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48

Return EPROBE_DEFER in that case so the driver can register the device
later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver/dma/ioat: Call del_timer_sync() without holding prep_lock

[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ]

The following lockdep splat was observed:

[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660]  ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743]  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
   :
[ 1223.524987] Chain exists of:
[ 1223.524987]   (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082]  Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630]        CPU0                    CPU1
[ 1223.645080]        ----                    ----
[ 1223.667404]   lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535]                                lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657]                                lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122]   lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095]  *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677]  #0:  (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310]  #1:  (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604]  #2:  (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000]  #3:  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]

In the ioat_shutdown() function:

spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);

According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.

The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Prevent unbalanced IRQ disable

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]

The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.

Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix implicit casts in endianness helpers

[ Upstream commit aae733a3f46f5ef338fbdde26e14cbb205a23de0 ]

Fix the following sparse endianness warnings:

drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __le32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __le32 [usertype] <noident>
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __be32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __be32 [usertype] <noident>

drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32

Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode

[ Upstream commit 726d75a6d243bf6730da3216f3592503f6f0f588 ]

Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case the workaround is not
applied for RC mode in order to maintain DT backward compatibility.

Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
[lorenzo.pieralisi@arm.com: reworded the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etb10: Fix handling of perf mode

[ Upstream commit 987d1e8dcd370d96029a3d76a0031b043c4a69ae ]

If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice

[ Upstream commit 4c1ef72e9b71a19fb405ebfcd37c0a5e16fa44ca ]

It is a serious driver defect to enable MSI or MSI-X more than once.  Doing
so may panic the kernel as in the stack trace below:

  Call Trace:
    sysfs_add_one+0xa5/0xd0
    create_dir+0x7c/0xe0
    sysfs_create_subdir+0x1c/0x20
    internal_create_group+0x6d/0x290
    sysfs_create_groups+0x4a/0xa0
    populate_msi_sysfs+0x1cd/0x210
    pci_enable_msix+0x31c/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ---[ end trace 11042e2848880209 ]---
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa

We want to keep the WARN_ON() and stack trace so the driver can be fixed,
but we can avoid the kernel panic by returning an error.  We may still get
warnings like this:

  Call Trace:
    pci_enable_msix+0x3c9/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ------------[ cut here ]------------
    WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0()
    sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs'

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
[bhelgaas: changelog, fix patch whitespace, remove !!]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to recover inode's i_flags during POR

[ Upstream commit 19c73a691ccf6fb2f12d4e9cf9830023966cec88 ]

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file

-----------------N- /mnt/f2fs/file

But actually, we expect the corrct result is:

-------A---------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_flags field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MD: fix invalid stored role for a disk

[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]

If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.

Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2

This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.

Reported-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Tested-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix argument checking in EXT4_IOC_MOVE_EXT

[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]

If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: atmel: handle at91sam9rl PMC

[ Upstream commit bb80e4fa57eb75ebd64ae9be4155da6d12c1a997 ]

The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has
its own compatible string. Add support for that.

Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible")
Acked-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI / ACPI: Enable wake automatically for power managed bridges

[ Upstream commit 6299cf9ec3985cac70bede8a855b5087b81a6640 ]

We enable power management automatically for bridges where
pci_bridge_d3_possible() returns true. However, these bridges may have
ACPI methods such as _DSW that need to be called before D3 entry. For
example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare
D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is
not enabled _DSW method is never called and the port does not enter
D3cold properly consuming more power than necessary.

Users can work this around by writing "enabled" to "wakeup" sysfs file
under the device in question but that is not something an ordinary user
is expected to do.

Since we already automatically enable power management for PCIe ports
with ->bridge_d3 set extend that to enable wake for them as well,
assuming the port has any ACPI wakeup related objects implemented in the
namespace (adev->wakeup.flags.valid is true). This ensures the necessary
ACPI methods get called at appropriate times and allows the root port in
Thinkpad X1 Carbon 6th to go into D3cold.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Resource wildcard match fixed

[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]

When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.

Fixes: bc63dedb7d46 ("VMCI: resource object implementation")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Use cpumask_var_t for on-stack cpu mask

[ Upstream commit 25355252607ca288f329ee033f387764883393f6 ]

A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this):

drivers/hv//channel_mgmt.c: In function ‘init_vp_index’:
drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes
  is larger than 1024 bytes [-Wframe-larger-than=]

Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and
hence we can work around the warning by using cpumask_var_t.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic

[ Upstream commit 074d6f32689ce05a084b6fa3db38445745bf11cc ]

The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.

Current code retrieving slot connected to a given endpoint device.

Assuming each slot is connected to one endpoint device as below:

                host bridge
  bus 0 --> __________|_______
           |                  |
           |                  |
         slot 0             slot 1
  bus 1 -->|        bus 2 --> |
           |                  |
         EP 0               EP 1

During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.

This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-at91: fix request of irq for optional gpio

[ Upstream commit 325b9313ec3be56c8e2fe03f977fee19cec75820 ]

atmel,oc-gpio is optional. Request its irq only when atmel,oc is set
in device tree.

devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its
return value for NULL before error, because it is more probable that
atmel,oc is not set.

This fixes the following errors on boards where atmel,oc is not set in
device tree:
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Fix recursive lock warning in debug kernel

[ Upstream commit d455f29f6d76a5f94881ca1289aaa1e90617ff5d ]

Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.

[  783.914967] ============================================
[  783.914970] WARNING: possible recursive locking detected
[  783.914973] 4.19.0-rc2+ #33 Not tainted
[  783.914976] --------------------------------------------
[  783.914979] swapper/2/0 is trying to acquire lock:
[  783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.914999]
but task is already holding lock:
[  783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915013]
other info that might help us debug this:
[  783.915016]  Possible unsafe locking scenario:

[  783.915019]        CPU0
[  783.915021]        ----
[  783.915034]   lock(&(&hwq->lock)->rlock);
[  783.915035]   lock(&(&hwq->lock)->rlock);
[  783.915037]
 *** DEADLOCK ***

[  783.915038]  May be due to missing lock nesting notation

[  783.915039] 1 lock held by swapper/2/0:
[  783.915040]  #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915044]
stack backtrace:
[  783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[  783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[  783.915048] Call Trace:
[  783.915049]  <IRQ>
[  783.915054]  dump_stack+0x90/0xe3
[  783.915058]  __lock_acquire+0x106c/0x1080
[  783.915061]  ? sched_clock+0x5/0x10
[  783.915063]  lock_acquire+0xbd/0x1a0
[  783.915065]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915069]  _raw_spin_lock_irqsave+0x4a/0x90
[  783.915071]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915073]  bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915078]  tasklet_action_common.isra.17+0x197/0x1b0
[  783.915081]  __do_softirq+0xcb/0x3a6
[  783.915084]  irq_exit+0xe9/0x100
[  783.915085]  do_IRQ+0x6a/0x120
[  783.915087]  common_interrupt+0xf/0xf
[  783.915088]  </IRQ>

Use nested notation for the spin_lock to avoid this warning.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Clear IPCB before icmp_send

[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]

IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:

[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G           O      4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888]  dump_stack+0x9a/0xeb
[ 1083.036031]  print_address_description+0xe3/0x2e0
[ 1083.036213]  kasan_report+0x18a/0x2e0
[ 1083.036356]  ? __ip_options_echo+0xf08/0x1310
[ 1083.036522]  __ip_options_echo+0xf08/0x1310
[ 1083.036688]  icmp_send+0x7b9/0x1cd0
[ 1083.036843]  ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018]  ? netif_schedule_queue+0x5/0x200
[ 1083.037180]  ? debug_show_all_locks+0x310/0x310
[ 1083.037341]  ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519]  ? debug_locks_off+0x11/0x80
[ 1083.037673]  ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841]  ? check_flags.part.27+0x450/0x450
[ 1083.037995]  ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169]  ? debug_locks_off+0x11/0x80
[ 1083.038318]  ? skb_dequeue+0x10e/0x1a0
[ 1083.038476]  ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642]  ? netif_schedule_queue+0xa8/0x200
[ 1083.038820]  ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996]  ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174]  process_one_work+0x912/0x1830
[ 1083.039336]  ? wq_pool_ids_show+0x310/0x310
[ 1083.039491]  ? lock_acquire+0x145/0x3a0
[ 1083.042312]  worker_thread+0x87/0xbb0
[ 1083.045099]  ? process_one_work+0x1830/0x1830
[ 1083.047865]  kthread+0x322/0x3e0
[ 1083.050624]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354]  ret_from_fork+0x3a/0x50

For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB

[  762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[  762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[  762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[  762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[  762.140269] ==================================================================
[  762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[  762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[  762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7

Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Do not expose unsupported counters

[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]

If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: fix a missing-check bug

[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]

In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Clear reserved bits of #DB exit qualification

[ Upstream commit cfb634fe3052aefc4e1360fa322018c9a0b49755 ]

According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."

There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception.  DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.

Fixes: b96fb439774e1 ("KVM: nVMX: fixes to nested virt interrupt injection")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UAPI: ndctl: Fix g++-unsupported initialisation in headers

[ Upstream commit 9607871f37dc3e717639694b8d0dc738f2a68efc ]

The following code in the linux/ndctl header file:

static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
{
static const char * const names[] = {
[ND_CMD_ARS_CAP] = "ars_cap",
[ND_CMD_ARS_START] = "ars_start",
[ND_CMD_ARS_STATUS] = "ars_status",
[ND_CMD_CLEAR_ERROR] = "clear_error",
[ND_CMD_CALL] = "cmd_call",
};

if (cmd < ARRAY_SIZE(names) && names[cmd])
return names[cmd];
return "unknown";
}

is broken in a number of ways:

 (1) ARRAY_SIZE() is not generally defined.

 (2) g++ does not support "non-trivial" array initialisers fully yet.

 (3) Every file that calls this function will acquire a copy of names[].

The same goes for nvdimm_cmd_name().

Fix all three by converting to a switch statement where each case returns a
string.  That way if cmd is a constant, the compiler can trivially reduce it
and, if not, the compiler can use a shared lookup table if it thinks that is
more efficient.

A better way would be to remove these functions and their arrays from the
header entirely.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: esp_scsi: Track residual for PIO transfers

[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup, netclassid: add a preemption point to write_classid

[ Upstream commit a90e90b7d55e789c71d85b946ffb5c1ab2f137ca ]

We have seen a customer complaining about soft lockups on !PREEMPT
kernel config with 4.4 based kernel

[1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1]
[1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4
[1072141.444146] Supported: Yes
[1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1
[1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018
[1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000
[1072141.444153] RIP: 0010:[<ffffffff815229f9>]  [<ffffffff815229f9>] update_classid_sock+0x29/0x40
[1072141.444157] RSP: 0018:ffff880191bd7d58  EFLAGS: 00000286
[1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000
[1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200
[1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000
[1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0
[1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28
[1072141.444163] FS:  00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000
[1072141.444164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0
[1072141.444166] Stack:
[1072141.444166]  ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0
[1072141.444168]  ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea
[1072141.444170]  ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0
[1072141.444171] Call Trace:
[1072141.444179]  [<ffffffff8121d583>] iterate_fd+0x53/0x80
[1072141.444182]  [<ffffffff81522b1c>] write_classid+0x4c/0x80
[1072141.444187]  [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100
[1072141.444193]  [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150
[1072141.444198]  [<ffffffff81201566>] __vfs_write+0x26/0x100
[1072141.444201]  [<ffffffff81201bed>] vfs_write+0x9d/0x190
[1072141.444203]  [<ffffffff812028c2>] SyS_write+0x42/0xa0
[1072141.444207]  [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca
[1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca

If a cgroup has many tasks with many open file descriptors then we would
end up in a large loop without any rescheduling point throught the
operation. Add cond_resched once per task.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: da9062/61: Prevent hardware access during system suspend

[ Upstream commit 760eea43f8c6d48684f1f34b8a02fddc1456e849 ]

The workqueue used for monitoring the hardware may run while the device
is already suspended.  Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from
happening during system suspend").

Fixes: 608567aac3206ae8 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: schedule hardware restart if WMI command times out

[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]

When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.

Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.

The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbevf: VF2VF TCP RSS

[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ]

While VF2VF with RSS communication, RSS Type were wrongly recognized
and RSS hash was not calculated as it should be. Packets was
distributed on various queues by accident.
This commit fixes that behaviour and causes proper RSS Type recognition.

Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix BAR seq ctrl reporting

[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ]

There is a bug in FW where the sequence control may be
incorrect, and the driver overrides it with the value
of the ieee80211 header.

However, in BAR there is no sequence control in the header,
which result with arbitrary sequence.

This access to an unknown location is bad and it makes the
logs very confusing - so fix it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: Fix writing to a PHY page.

[ Upstream commit c309b158090d788e96ee597444965cb79b040484 ]

After changing to the needed page, actually write the value to the
register!

Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]

If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem.  Let's fix it there too.

NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute.  If the last element (has_arg) is false then you need
to do the -EINVAL trick.

ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that.  It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.

Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>