Julian Anastasov [Sat, 4 Feb 2012 13:04:46 +0000 (13:04 +0000)]
ipv4: reset flowi parameters on route connect
Eric Dumazet found that commit
813b3b5db83
(ipv4: Use caller's on-stack flowi as-is in output
route lookups.) that comes in 3.0 added a regression.
The problem appears to be that resulting flowi4_oif is
used incorrectly as input parameter to some routing lookups.
The result is that when connecting to local port without
listener if the IP address that is used is not on a loopback
interface we incorrectly assign RTN_UNICAST to the output
route because no route is matched by oif=lo. The RST packet
can not be sent immediately by tcp_v4_send_reset because
it expects RTN_LOCAL.
So, change ip_route_connect and ip_route_newports to
update the flowi4 fields that are input parameters because
we do not want unnecessary binding to oif.
To make it clear what are the input parameters that
can be modified during lookup and to show which fields of
floiw4 are reused add a new function to update the flowi4
structure: flowi4_update_output.
Thanks to Yurij M. Plotnikov for providing a bug report including a
program to reproduce the problem.
Thanks to Eric Dumazet for tracking the problem down to
tcp_v4_send_reset and providing initial fix.
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shawn Lu [Sat, 4 Feb 2012 12:38:09 +0000 (12:38 +0000)]
tcp_v4_send_reset: binding oif to iif in no sock case
Binding RST packet outgoing interface to incoming interface
for tcp v4 when there is no socket associate with it.
when sk is not NULL, using sk->sk_bound_dev_if instead.
(suggested by Eric Dumazet).
This has few benefits:
1. tcp_v6_send_reset already did that.
2. This helps tcp connect with SO_BINDTODEVICE set. When
connection is lost, we still able to sending out RST using
same interface.
3. we are sending reply, it is most likely to be succeed
if iif is used
Signed-off-by: Shawn Lu <shawn.lu@ericsson.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 3 Feb 2012 05:18:43 +0000 (05:18 +0000)]
netprio_cgroup: Fix obo in get_prioidx
It was recently pointed out to me that the get_prioidx function sets a bit in
the prioidx map prior to checking to see if the index being set is out of
bounds. This patch corrects that, avoiding the possiblity of us writing beyond
the end of the array
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
CC: Stanislaw Gruszka <sgruszka@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 4 Feb 2012 21:10:34 +0000 (16:10 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless
John W. Linville [Fri, 3 Feb 2012 19:14:07 +0000 (14:14 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Masanari Iida [Mon, 23 Jan 2012 12:47:32 +0000 (12:47 +0000)]
ixgbe: Fix typo in ixgbe_common.h
Correct spelling "packtetbuf_num" to "packetbuf_num" in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Mitch A Williams [Tue, 17 Jan 2012 04:09:05 +0000 (04:09 +0000)]
igbvf: change copyright date
Change copyright date to 2012 in the source files.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Fri, 6 Jan 2012 02:53:30 +0000 (02:53 +0000)]
ixgbevf: Update copyright notices
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Wed, 1 Feb 2012 01:28:15 +0000 (01:28 +0000)]
ixgbevf: Fix mailbox interrupt ack bug
Remove jump to out label that was skipping over code to replace the
ack bit in the mailbox cache variable. This was causing driver mailbox
routines that poll for the PF to ack a message to time out which would
in turn cause all other mailbox messages to fail. Also replace the
mailbox cache variable message indication bit when a message is found
so that other functions that choose to poll for a mailbox message from
the PF won't miss it.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stephen Hemminger [Thu, 5 Jan 2012 06:29:54 +0000 (06:29 +0000)]
ixgbe: make ethtool strings table const
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Thu, 5 Jan 2012 07:58:11 +0000 (07:58 +0000)]
ixgbe: Add warning when no space left for more MAC filters
Send message to system log when the VF requests another MAC filter
but there is no space left on the device for it.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Don Skidmore [Fri, 6 Jan 2012 03:24:16 +0000 (03:24 +0000)]
ixgbe: update copyright to 2012
New year so bump the copyright date.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stephane Grosjean [Wed, 1 Feb 2012 10:05:48 +0000 (11:05 +0100)]
can: peak_pci: Fix the way channels are linked together
Change the way channels objects are linked together by peak_pci_probe()
avoiding any kernel oops when driver is removed. Side effect is that
the list is now browsed from last to first channel.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sebastian Haas [Thu, 22 Dec 2011 22:57:49 +0000 (23:57 +0100)]
can: ems_usb: Removed double netif_device_detach
netif_device_attched is called twice when ems_usb_start fails with -ENODEV
Signed-off-by: Sebastian Haas <dev@sebastianhaas.info>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Xi Wang [Mon, 12 Dec 2011 07:16:20 +0000 (02:16 -0500)]
can: pch_can: fix error passive level test
The test (((errc & PCH_REC) >> 8) > 127) would always be false because
the receive error counter ((errc & PCH_REC) >> 8) is at most 127, where
PCH_REC is defined as 0x7f00. To test whether the receive error counter
has reached the error passive level, the RP bit (15) should be used.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang Grandegger [Wed, 1 Feb 2012 09:50:23 +0000 (10:50 +0100)]
can: ti_hecc: use netif_rx in the interrupt
This patch fixes locking problems by using netif_rx() instead of
netif_receive_skb() in ti_hecc_error() called from the interrupt
context.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang Zarre [Sun, 15 Jan 2012 12:21:34 +0000 (13:21 +0100)]
can: cc770: Fix indirect access deadlock on ISA cards
This fix avoids a deadlock if an interrupt occurs
during consecutive port operations on ISA cards
utilising indirect access via address and data
port.
Tested on a B&R ISA card.
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Wolfgang Zarre <lkdev@essax.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang Grandegger [Mon, 12 Dec 2011 15:07:16 +0000 (16:07 +0100)]
can: cc770: store echo skb before starting the transfer
On slow systems and high CAN bitrates, the error message
"can_put_echo_skb: BUG! echo_skb is occupied!" did show up because
can_put_echo_skb() was called after starting the transfer.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang Grandegger [Mon, 12 Dec 2011 15:09:28 +0000 (16:09 +0100)]
can: flexcan: fix irq flooding by clearing all interrupt sources
As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT,
RWRN_INT, BOFF_INT interrupt sources need to be cleared as well
to avoid interrupt flooding, at least for the Flexcan on i.MX28
SOCs. Furthermore, the interrupts are only cleared, if really one
of those interrupt sources are pending (which is not the case for
rx and tx done).
Cc: Reuben Dowle <Reuben.Dowle@navico.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dmitry Tarnyagin [Thu, 2 Feb 2012 01:21:03 +0000 (01:21 +0000)]
caif: Bugfix double kfree_skb upon xmit failure
SKB is freed twice upon send error. The Network stack consumes SKB even
when it returns error code.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Thu, 2 Feb 2012 01:21:02 +0000 (01:21 +0000)]
caif: Bugfix list_del_rcu race in cfmuxl_ctrlcmd.
Always use cfmuxl_remove_uplayer when removing a up-layer.
cfmuxl_ctrlcmd() can be called independently and in parallel with
cfmuxl_remove_uplayer(). The race between them could cause list_del_rcu
to be called on a node which has been already taken out from the list.
That lead to a (rare) crash on accessing poisoned node->prev inside
list_del_rcu.
This fix ensures that deletion are done holding the same lock.
Reported-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 2 Feb 2012 07:18:00 +0000 (07:18 +0000)]
net/hyperv: Fix the page buffer when an RNDIS message goes beyond page boundary
There is a possible data corruption if an RNDIS message goes beyond page
boundary in the sending code path. This patch fixes the problem.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 2 Feb 2012 07:17:59 +0000 (07:17 +0000)]
net/hyperv: Use netif_tx_disable() instead of netif_stop_queue() when necessary
For code path not on the xmit, use netif_tx_disable() instead of
netif_stop_queue() to ensure other CPUs are not doing xmit.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 2 Feb 2012 04:53:01 +0000 (04:53 +0000)]
drivers/net/ethernet/ti: Move call to PTR_ERR after reassignment
PTR_ERR should be called before its argument is cleared.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1;
constant c;
@@
*e = c
... when != e = e1
when != &e
when != true IS_ERR(e)
*PTR_ERR(e)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 1 Feb 2012 20:17:23 +0000 (20:17 +0000)]
net/hyperv: fix the issue that large packets be dropped under bridge
The packets with size larger than 1452 will be dropped by bridge
which with two hyperv netdevice ports. This cause by hyperv netvsc
driver always copy the trailer padding to the data packet, and then
the skb received from netdevice may include wrong skb->len (20 bytes
larger than the real size normally). The captured packet may like
this:
Ethernet II, Src: Microsof_00:00:07 (00:15:5d:00:00:07),
Dst: HewlettP_00:00:4e (00:1f:29:00:00:4e)
Destination: HewlettP_e6:00:4e (00:1f:29:00:00:4e)
Source: Microsof_f6:6d:07 (00:15:5d:f6:6d:07)
Type: IP (0x0800)
Trailer:
1415161718191A1B1C1D1E1F20212223
Frame check sequence: 0x24252627 [incorrect, should be 0x7c2e5a5e]
The following command help to reproduction it, and the ping ICMP
packets will be dropped by bridge.
$ ping ip -s 1453
This patch fixed it by removing the trailer padding from the data
packet.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 2 Feb 2012 00:07:00 +0000 (00:07 +0000)]
tcp: properly initialize tcp memory limits
Commit
4acb4190 tries to fix the using uninitialized value
introduced by commit
3dc43e3, but it would make the
per-socket memory limits too small.
This patch fixes this and also remove the redundant codes
introduced in
4acb4190.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliad Peller [Wed, 1 Feb 2012 16:48:09 +0000 (18:48 +0200)]
mac80211: timeout a single frame in the rx reorder buffer
The current code checks for stored_mpdu_num > 1, causing
the reorder_timer to be triggered indefinitely, but the
frame is never timed-out (until the next packet is received)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Cc: <stable@vger.kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Wed, 1 Feb 2012 15:01:32 +0000 (07:01 -0800)]
iwlwifi: don't mess up QoS counters with non-QoS frames
In my AMPDU rework, I rely on the sequence numbers of frames. But
I didn't check that the frame has a valid tid before updating the
tracking counters. As a result, the Tx queues were stalled. People
who hit this bug saw that we simply didn't let any data out.
This bug was introduced in 3.3.
This patch fixes that and checks that the frame is a QoS frame before
looking at its tid and changing the counters.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hauke Mehrtens [Tue, 31 Jan 2012 23:13:53 +0000 (00:13 +0100)]
ssb: fix cardbus slot in hostmode
ssb supports one extra device on the cardbus. This results in two
devices in total, one beeing the host controller itself and the other
the external device connected to the hostcontroller over cardbus.
This makes the cardbus slot work on the Linksys WRT150N.
Reported-by: Aaron Z <aaronz@pls-net.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Tue, 31 Jan 2012 19:40:49 +0000 (14:40 -0500)]
iwlwifi: make "Tx aggregation enabled on ra =" be at DEBUG level
Average users either don't care or they think that message indicates a
problem...
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luigi Tarenga [Tue, 31 Jan 2012 17:51:23 +0000 (18:51 +0100)]
rt2800lib: fix wrong -128dBm when signal is stronger than -12dBm
This patch correct the type of variables containing the rssi
values read from the rxwi.
In function rt2800_agc_to_rssi() 3 variables (rssi0, rssi1, rss2)
defined as int was assigned a 16bit signed values as unsigned.
From a test with a hi-gain antenna I verified that the rxwi
contains signed rssi values in the range -13/+81 (inclusive)
with 0 as an error condition. In case of negative values a
condition is triggered and the function return -128dBm while
the signal is at its maximum. This patch correct the cast so
negative values are not treated as very high positive values
(ex. -13 does not become 243).
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jesper Juhl [Sun, 29 Jan 2012 20:34:04 +0000 (21:34 +0100)]
bcma: Fix mem leak in bcma_bus_scan()
bcma_bus_scan() leaks 'struct bcma_device' bytes if
bcma_get_next_core() returns error.
Restructure the code so we always kfree() the memory we allocate to
the variable 'core' before it goes out of scope.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Hutchings [Wed, 1 Feb 2012 09:32:25 +0000 (09:32 +0000)]
ethtool: Null-terminate filename passed to ethtool_ops::flash_device
The parameters for ETHTOOL_FLASHDEV include a filename, which ought to
be null-terminated. Currently the only driver that implements
ethtool_ops::flash_device attempts to add a null terminator if
necessary, but does it wrongly. Do it in the ethtool core instead.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Sharma [Mon, 30 Jan 2012 22:16:06 +0000 (14:16 -0800)]
net: Disambiguate kernel message
Some of our machines were reporting:
TCP: too many of orphaned sockets
even when the number of orphaned sockets was well below the
limit.
We print a different message depending on whether we're out
of TCP memory or there are too many orphaned sockets.
Also move the check out of line and cleanup the messages
that were printed.
Signed-off-by: Arun Sharma <asharma@fb.com>
Suggested-by: Mohan Srinivasan <mohan@fb.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sun, 29 Jan 2012 22:14:02 +0000 (22:14 +0000)]
net/hyperv: rx_bytes should account the ether header size
skb->len after call eth_type_trans() does not include the ether
header size, but rx_bytes should account it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Zhao [Sun, 29 Jan 2012 22:08:12 +0000 (22:08 +0000)]
net: fec: correct phy_name buffer length when init phy_name
Fix the bug that we got wrong phy_name on imx6q sabrelite board.
snprintf used wrong length of phy_name.
phy_name length is MII_BUS_ID_SIZE + 3 rather not MII_BUS_ID_SIZE.
I change it to sizeof(phy_name).
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 31 Jan 2012 17:23:59 +0000 (09:23 -0800)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
There are few important bug fixes for LogFS
* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
Logfs: Allow NULL block_isbad() methods
logfs: Grow inode in delete path
logfs: Free areas before calling generic_shutdown_super()
logfs: remove useless BUG_ON
MAINTAINERS: Add Prasad Joshi in LogFS maintiners
logfs: Propagate page parameter to __logfs_write_inode
logfs: set superblock shutdown flag after generic sb shutdown
logfs: take write mutex lock during fsync and sync
logfs: Prevent memory corruption
logfs: update page reference count for pined pages
Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what
"mtd->block_isbad" means in commit
f2933e86ad93: "Logfs: Allow NULL
block_isbad() methods" clashing with the abstraction changes in the
commits
7086c19d0742: "mtd: introduce mtd_block_isbad interface" and
d58b27ed58a3: "logfs: do not use 'mtd->block_isbad' directly".
This resolution takes the semantics from commit
f2933e86ad93, and just
makes mtd_block_isbad() return zero (false) if the 'block_isbad'
function is NULL. But that also means that now "mtd_can_have_bb()"
always returns 0.
Now, "mtd_block_markbad()" will obviously return an error if the
low-level driver doesn't support bad blocks, so this is somewhat
non-symmetric, but it actually makes sense if a NULL "block_isbad"
function is considered to mean "I assume that all my blocks are always
good".
Linus Torvalds [Tue, 31 Jan 2012 01:08:40 +0000 (17:08 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
hwmon: (sht15) fix bad error code
MAINTAINERS: Drop maintainer for MAX1668 hwmon driver
MAINTAINERS: Add hwmon entries for Wolfson
hwmon: (
f71805f) Fix clamping of temperature limits
Linus Torvalds [Tue, 31 Jan 2012 01:06:26 +0000 (17:06 -0800)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-pinctrl
Here are some fixes to the pin control system that has accumulated since
-rc1. Mainly Tony Lindgren fixed the module load/unload logic and the
rest are minor fixes and documentation.
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: add checks for empty function names
pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set
pinctrl: fix some pinmux typos
pinctrl: free debugfs entries when unloading a pinmux driver
pinctrl: unbreak error messages
Documentation/pinctrl: fix a few syntax errors in code examples
pinctrl: fix pinconf_pins_show iteration
Linus Torvalds [Mon, 30 Jan 2012 23:17:21 +0000 (15:17 -0800)]
Merge tag 'tty-3.3-rc1' of git://git./linux/kernel/git/gregkh/tty
Here are some tty/serial patches for 3.3-rc1
Big thing here is the movement of the 8250 serial drivers to their own
directory, now that the patch churn has calmed down.
Other than that, only minor stuff (omap patches were reverted as they
were found to be wrong), and another broken driver removed from the
system.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Kill off Moorestown code
Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode"
Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip"
serial: Fix wakeup init logic to speed up startup
docbook: don't use serial_core.h in device-drivers book
serial: amba-pl011: lock console writes against interrupts
amba-pl011: do not disable RTS during shutdown
tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip
tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode
omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP.
TTY: fix UV serial console regression
jsm: Fixed EEH recovery error
Updated TTY MAINTAINERS info
serial: group all the 8250 related code together
Linus Torvalds [Mon, 30 Jan 2012 19:38:28 +0000 (11:38 -0800)]
Merge tag 'usb-3.3-rc1' of git://git./linux/kernel/git/gregkh/usb
Here are a bunch of USB patches for 3.3-rc1.
Nothing major, largest thing here is the removal of some drivers that
did not work at all. Other than that, the normal collection of bugfixes
and new device ids.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits)
uwb & wusb: fix kconfig error
USB: Realtek cr: fix autopm scheduling while atomic
USB: ftdi_sio: Add more identifiers
xHCI: Cleanup isoc transfer ring when TD length mismatch found
usb: musb: omap2430: minor cleanups.
qcaux: add more Pantech UML190 and UML290 ports
Revert "drivers: usb: Fix dependency for USB_HWA_HCD"
usb: mv-otg - Fix build if CONFIG_USB is not set
USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE
usb: add support for STA2X11 host driver
drivers: usb: Fix dependency for USB_HWA_HCD
kernel-doc: fix new warning in usb.h
USB: OHCI: fix new compiler warnings
usb: serial: kobil_sct: fix compile warning:
drivers/usb/host/ehci-fsl.c: add missing iounmap
USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core
USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
USB: cdc-wdm: use two mutexes to allow simultaneous read and write
USB: cdc-wdm: updating desc->length must be protected by spin_lock
USB: usbsevseg: fix max length
...
Linus Torvalds [Mon, 30 Jan 2012 18:53:20 +0000 (10:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
1) Setting link attributes can modify the size of the attributes that
would be reported on a subsequent getlink netlink operation,
therefore min_ifinfo_dump_size needs to be adjusted. From Stefan
Gula.
2) Resegmentation of TSO frames while trimming can violate invariants
expected by callers, namely that the number of segments can only stay
the same or decrease, never increase. If MSS changes, however, we
can trim data but then end up with more segments. Fix this by only
segmenting to the MSS already recorded in the SKB. That's the
simplest fix for now and if we want to get more fancy in the future
that's a more involved change.
This probably explains some retransmit counter inaccuracies.
From Neal Cardwell.
3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet.
4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and
Eric W. Biederman.
5) TCP port selection fixes from Flavio Leitner.
6) More socket memory cgroup build fixes in certain randonfig
situations. From Glauber Costa.
7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from
Glauber Costa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
af_unix: fix EPOLLET regression for stream sockets
tcp: fix tcp_trim_head() to adjust segment count with skb MSS
net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL
net caif: Register properly as a pernet subsystem.
netns: Fail conspicously if someone uses net_generic at an inappropriate time.
net: explicitly add jump_label.h header to sock.h
net: RTNETLINK adjusting values of min_ifinfo_dump_size
ipv6: Fix ip_gre lockless xmits.
xen-netfront: correct MAX_TX_TARGET calculation.
netns: fix net_alloc_generic()
tcp: bind() optimize port allocation
tcp: bind() fix autoselection to share ports
l2tp: l2tp_ip - fix possible oops on packet receive
iwlwifi: fix PCI-E transport "inta" race
mac80211: set bss_conf.idle when vif is connected
mac80211: update oper_channel on ibss join
Linus Torvalds [Mon, 30 Jan 2012 18:16:25 +0000 (10:16 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regulator
This fixes an integration issue with the regulator device tree bindings
which shook out in -rc. The bindings were overly enthusiatic when
deciding to set a voltage on a regulator and would try to set zero volts
on an unconfigured regulator which isn't supported.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Set apply_uV only when min and max voltages are defined
Eric Dumazet [Sat, 28 Jan 2012 16:11:03 +0000 (16:11 +0000)]
af_unix: fix EPOLLET regression for stream sockets
Commit
0884d7aa24 (AF_UNIX: Fix poll blocking problem when reading from
a stream socket) added a regression for epoll() in Edge Triggered mode
(EPOLLET)
Appropriate fix is to use skb_peek()/skb_unlink() instead of
skb_dequeue(), and only call skb_unlink() when skb is fully consumed.
This remove the need to requeue a partial skb into sk_receive_queue head
and the extra sk->sk_data_ready() calls that added the regression.
This is safe because once skb is given to sk_receive_queue, it is not
modified by a writer, and readers are serialized by u->readlock mutex.
This also reduce number of spinlock acquisition for small reads or
MSG_PEEK users so should improve overall performance.
Reported-by: Nick Mathewson <nickm@freehaven.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Alexey Moiseytsev <himeraster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Sat, 28 Jan 2012 17:29:46 +0000 (17:29 +0000)]
tcp: fix tcp_trim_head() to adjust segment count with skb MSS
This commit fixes tcp_trim_head() to recalculate the number of
segments in the skb with the skb's existing MSS, so trimming the head
causes the skb segment count to be monotonically non-increasing - it
should stay the same or go down, but not increase.
Previously tcp_trim_head() used the current MSS of the connection. But
if there was a decrease in MSS between original transmission and ACK
(e.g. due to PMTUD), this could cause tcp_trim_head() to
counter-intuitively increase the segment count when trimming bytes off
the head of an skb. This violated assumptions in tcp_tso_acked() that
tcp_trim_head() only decreases the packet count, so that packets_acked
in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to
pass u32 pkts_acked values as large as 0xffffffff to
ca_ops->pkts_acked().
As an aside, if tcp_trim_head() had really wanted the skb to reflect
the current MSS, it should have called tcp_set_skb_tso_segs()
unconditionally, since a decrease in MSS would mean that a
single-packet skb should now be sliced into multiple segments.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Glauber Costa [Mon, 30 Jan 2012 01:20:17 +0000 (01:20 +0000)]
net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c
in commit
3dc43e3e4d0b52197d3205214fe8f162f9e0c334, since it
became a per-ns value.
That code, however, will never run when CONFIG_SYSCTL is
disabled, leading to bogus values on those fields - causing hung
TCP sockets.
This patch fixes it by keeping an initialization code in
tcp_init(). It will be overwritten by the first net namespace
init if CONFIG_SYSCTL is compiled in, and do the right thing if
it is compiled out.
It is also named properly as tcp_init_mem(), to properly signal
its non-sysctl side effect on TCP limits.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com
[ renamed the function, tidied up the changelog a bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 30 Jan 2012 17:02:10 +0000 (09:02 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
[S390] dasd: revalidate server for new pathgroup
[S390] dasd: revert LCU optimization
[S390] cleanup entry point definition
Linus Torvalds [Mon, 30 Jan 2012 16:59:46 +0000 (08:59 -0800)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: generic atomic64 support
Linus Torvalds [Mon, 30 Jan 2012 16:56:41 +0000 (08:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
vmwgfx: Fix assignment in vmw_framebuffer_create_handle
drm/radeon/kms: Fix device tree linkage of i2c buses
drm: Pass the real error code back during GEM bo initialisation
Revert "drm/i810: cleanup reclaim_buffers"
Linus Torvalds [Mon, 30 Jan 2012 16:47:49 +0000 (08:47 -0800)]
Merge tag 'nfs-for-3.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
NFS client bugfixes for Linux 3.3 (pull 3)
* tag 'nfs-for-3.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix machine creds in generic_create_cred and generic_match
Linus Torvalds [Mon, 30 Jan 2012 16:33:40 +0000 (08:33 -0800)]
Merge tag 'pm-fix-for-3.3-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Power management fix for 3.3-rc2
Fix for a hibernate (s2disk) regression introduced during the 3.2
merge window that causes s2disk to trigger BUG_ON() in
freeze_workqueues_begin() if there is not enough swap space to save
the image.
* tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Hibernate: Fix s2disk regression related to freezing workqueues
Ryan Mallon [Fri, 27 Jan 2012 21:51:40 +0000 (08:51 +1100)]
vmwgfx: Fix assignment in vmw_framebuffer_create_handle
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Reviewed-by: Jakob Bornecrantz<jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jean Delvare [Sat, 28 Jan 2012 10:10:38 +0000 (11:10 +0100)]
drm/radeon/kms: Fix device tree linkage of i2c buses
Properly set the parent device of i2c buses before registering them so
that they will show at the right place in the device tree (rather than
in /sys/devices directly.)
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Sun, 29 Jan 2012 16:45:32 +0000 (16:45 +0000)]
drm: Pass the real error code back during GEM bo initialisation
In particular, I found I was hitting the max-file limit in the VFS,
and the EFILE was being magically transformed into ENOMEM. Confusion
reigns.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Sun, 29 Jan 2012 16:05:52 +0000 (17:05 +0100)]
Revert "drm/i810: cleanup reclaim_buffers"
This reverts commit
87499ffdcb1c70f66988cd8febc4ead0ba2f9118.
Where is that paper bag ... ah here.
I've failed to take an odd interaction between my other cleanups and
this reclaim_buffers patch into account and also failed to properly
test it. Looks like there are more dragons and hidden trapdoors in the
drm release path than actual lines of code.
Until I get a clue, let's just revert this.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Guenter Roeck [Sat, 28 Jan 2012 01:56:06 +0000 (17:56 -0800)]
hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt
is made to set those pwm channels to DC mode.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Rafael J. Wysocki [Sun, 29 Jan 2012 19:35:52 +0000 (20:35 +0100)]
PM / Hibernate: Fix s2disk regression related to freezing workqueues
Commit
2aede851ddf08666f68ffc17be446420e9d2a056
PM / Hibernate: Freeze kernel threads after preallocating memory
introduced a mechanism by which kernel threads were frozen after
the preallocation of hibernate image memory to avoid problems with
frozen kernel threads not responding to memory freeing requests.
However, it overlooked the s2disk code path in which the
SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE,
which caused freeze_workqueues_begin() to BUG(), because it saw
that worqueues had been already frozen.
Although in principle this issue might be addressed by removing
the relevant BUG_ON() from freeze_workqueues_begin(), that would
reintroduce the very problem that commit
2aede851ddf08666f68ffc17be4
attempted to avoid into that particular code path. For this reason,
to fix the issue at hand, introduce thaw_kernel_threads() and make
the SNAPSHOT_FREE ioctl execute it.
Special thanks to Srivatsa S. Bhat for detailed analysis of the
problem.
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: stable@kernel.org
Vivien Didelot [Thu, 26 Jan 2012 20:59:00 +0000 (15:59 -0500)]
hwmon: (sht15) fix bad error code
When no platform data was supplied, returned error code was 0.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: stable@vger.kernel.org # 2.6.32+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Linus Torvalds [Sun, 29 Jan 2012 02:20:48 +0000 (18:20 -0800)]
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git./linux/kernel/git/gregkh/driver-core
Here are some patches for the 3.3-rc1 tree.
It contains the removal of the sysdev code, now that all users of it are
gone, as well as some sysfs bugfixes that have been reported by users.
There are also some documentation updates here as well.
* tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Complain bitterly about attempts to remove files from nonexistent directories.
stable: update documentation to ask for kernel version
base/core.c:fix typo in comment in function device_add
Documentation: devres: add allocation functions to list of supported calls
Documentation update for the driver model core
kernel-doc: fix new warnings in driver-core
kernel-doc: fix new warnings in debugfs
kernel-doc: fix new warnings in device.h
driver core: remove drivers/base/sys.c and include/linux/sysdev.h
Linus Torvalds [Sun, 29 Jan 2012 02:16:09 +0000 (18:16 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux
* tag 'for-linus' of git://github.com/rustyrussell/linux:
lguest: remove reference from Documentation/virtual/00-INDEX
virtio: correct the memory barrier in virtqueue_kick_prepare()
virtio: fix typos of memory barriers
Linus Torvalds [Sun, 29 Jan 2012 02:15:33 +0000 (18:15 -0800)]
Merge branch 'stable/for-linus-fixes-3.3' of git://git./linux/kernel/git/konrad/xen
* 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/granttable: Disable grant v2 for HVM domains.
x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
Linus Torvalds [Sun, 29 Jan 2012 01:00:19 +0000 (17:00 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix reservations in btrfs_page_mkwrite
Btrfs: advance window_start if we're using a bitmap
btrfs: mask out gfp flags in releasepage
Btrfs: fix enospc error caused by wrong checks of the chunk
Btrfs: do not defrag a file partially
Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
Btrfs: use cluster->window_start when allocating from a cluster bitmap
Btrfs: Check for NULL page in extent_range_uptodate
btrfs: Fix busyloops in transaction waiting code
Btrfs: make sure a bitmap has enough bytes
Btrfs: fix uninit warning in backref.c
Linus Torvalds [Sun, 29 Jan 2012 00:57:15 +0000 (16:57 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDs
watchdog: via_wdt: Set min_timeout and max_timeout for wdt_dev
watchdog: Fix typo "unexpectdly"
watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
watchdog: Return proper error in nuc900wdt_probe if misc_register fails
watchdog: Staticise nuc900_wdt
watchdog: via_wdt: Staticise wdt_pci_table
watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disable
watchdog: dw_wdt.c: use devm_request_and_ioremap
watchdog: imx2_wdt.c: use devm_request_and_ioremap
Linus Torvalds [Sat, 28 Jan 2012 21:27:10 +0000 (13:27 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits)
ARM: 7304/1: ioremap: fix boundary check when reusing static mapping
ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts
ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2
ARM: 7298/1: realview: fix mapping of MPCore private memory region
PCMCIA: fix sa1111 oops on remove
ARM: 7288/1: mach-sa1100: add missing module_init() call
ARM: 7297/1: smp_twd: make sure timer is stopped before registering it
ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards
ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block
ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP
ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs
ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary
ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes
MFD: ucb1x00-ts: fix resume failure
MFD: ucb1x00-core: fix gpiolib direction_output handling
MFD: ucb1x00-core: fix missing restore of io output data on resume
MFD: mcp-core: fix mcp_priv() to be more type safe
MFD: mcp-core: fix complaints from the genirq layer
Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."
...
Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into
mach-imx5 (commit
784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into
mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by
the CPU_V7 logic from it in the old location in rmk's branch (commit
a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for
ARMv7 CPUs").
Linus Torvalds [Sat, 28 Jan 2012 21:21:54 +0000 (13:21 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
arm-soc fixes for 3.3-rc:
AT91 needed reset fixes which resulted in some minor code refactoring,
it also adds a feature-removal for one of their platforms for 3.4.
The USB patches have been acked by Greg K-H.
i.MX and ux500 both have some minor fixes, nothing controversial.
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap
ARM: imx: iomux-v1.h: Fix build error due to __init annotation
ARM: at91: Fix at91sam9g45 and at91cap9 reset
ARM: at91: make rstc soc independent
ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset
ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h
ARM: at91: fix cap9 ddrsdr register
ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low
USB: at91: fix clk_get error handling
ARM: at91: removal of CAP9 SoC family
ARM: at91: fix at91rm9200 soc subtype handling
mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball
mach-ux500: enable ARM errata 764369
mach-ux500: do not override outer.inv_all
mach-ux500: musb: now musb is always in OTG mode
ARM: imx6: add missing twd_clk for imx6q clock
Joern Engel [Fri, 5 Aug 2011 09:09:55 +0000 (11:09 +0200)]
Logfs: Allow NULL block_isbad() methods
Not all mtd drivers define block_isbad(). Let's assume no bad blocks
instead of refusing to mount.
Signed-off-by: Joern Engel <joern@logfs.org>
Joern Engel [Fri, 5 Aug 2011 09:13:30 +0000 (11:13 +0200)]
logfs: Grow inode in delete path
Can be necessary if an inode gets deleted (through -ENOSPC) before being
written. Might be better to move this into logfs_write_rec(), but for
now go with the stupid&safe patch.
Signed-off-by: Joern Engel <joern@logfs.org>
Joern Engel [Fri, 5 Aug 2011 09:18:19 +0000 (11:18 +0200)]
logfs: Free areas before calling generic_shutdown_super()
Or hit an assertion in map_invalidatepage() instead.
Signed-off-by: Joern Engel <joern@logfs.org>
Joern Engel [Mon, 12 Sep 2011 15:39:16 +0000 (21:09 +0530)]
logfs: remove useless BUG_ON
It prevents write sizes >4k.
Signed-off-by: Joern Engel <joern@logfs.org>
Prasad Joshi [Tue, 13 Sep 2011 17:34:11 +0000 (23:04 +0530)]
MAINTAINERS: Add Prasad Joshi in LogFS maintiners
Acked-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Prasad Joshi [Sun, 2 Oct 2011 18:16:51 +0000 (23:46 +0530)]
logfs: Propagate page parameter to __logfs_write_inode
During GC LogFS has to rewrite each valid block to a separate segment.
Rewrite operation reads data from an old segment and writes it to a
newly allocated segment. Since every write operation changes data
block pointers maintained in inode, inode should also be rewritten.
In GC path to avoid AB-BA deadlock LogFS marks a page with
PG_pre_locked in addition to locking the page (PG_locked). The page
lock is ignored iff the page is pre-locked.
LogFS uses a special file called segment file. The segment file
maintains an 8 bytes entry for every segment. It keeps track of erase
count, level etc. for every segment.
Bad things happen with a segment belonging to the segment file is GCed
------------[ cut here ]------------
kernel BUG at /home/prasad/logfs/readwrite.c:297!
invalid opcode: 0000 [#1] SMP
Modules linked in: logfs joydev usbhid hid psmouse e1000 i2c_piix4
serio_raw [last unloaded: logfs]
Pid: 20161, comm: mount Not tainted 3.1.0-rc3+ #3 innotek GmbH
VirtualBox
EIP: 0060:[<
f809132a>] EFLAGS:
00010292 CPU: 0
EIP is at logfs_lock_write_page+0x6a/0x70 [logfs]
EAX:
00000027 EBX:
f73f5b20 ECX:
c16007c8 EDX:
00000094
ESI:
00000000 EDI:
e59be6e4 EBP:
c7337b28 ESP:
c7337b18
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process mount (pid: 20161, ti=
c7336000 task=
eb323f70 task.ti=
c7336000)
Stack:
f8099a3d c7337b24 f73f5b20 00001002 c7337b50 f8091f6d f8099a4d f80994e4
00000003 00000000 c7337b68 00000000 c67e4400 00001000 c7337b80 f80935e5
00000000 00000000 00000000 00000000 e1fcf000 0000000f e59be618 c70bf900
Call Trace:
[<
f8091f6d>] logfs_get_write_page.clone.16+0xdd/0x100 [logfs]
[<
f80935e5>] logfs_mod_segment_entry+0x55/0x110 [logfs]
[<
f809460d>] logfs_get_segment_entry+0x1d/0x20 [logfs]
[<
f8091060>] ? logfs_cleanup_journal+0x50/0x50 [logfs]
[<
f809521b>] ostore_get_erase_count+0x1b/0x40 [logfs]
[<
f80965b8>] logfs_open_area+0xc8/0x150 [logfs]
[<
c141a7ec>] ? kmemleak_alloc+0x2c/0x60
[<
f809668e>] __logfs_segment_write.clone.16+0x4e/0x1b0 [logfs]
[<
c10dd563>] ? mempool_kmalloc+0x13/0x20
[<
c10dd563>] ? mempool_kmalloc+0x13/0x20
[<
f809696f>] logfs_segment_write+0x17f/0x1d0 [logfs]
[<
f8092e8c>] logfs_write_i0+0x11c/0x180 [logfs]
[<
f8092f35>] logfs_write_direct+0x45/0x90 [logfs]
[<
f80934cd>] __logfs_write_buf+0xbd/0xf0 [logfs]
[<
c102900e>] ? kmap_atomic_prot+0x4e/0xe0
[<
f809424b>] logfs_write_buf+0x3b/0x60 [logfs]
[<
f80947a9>] __logfs_write_inode+0xa9/0x110 [logfs]
[<
f8094cb0>] logfs_rewrite_block+0xc0/0x110 [logfs]
[<
f8095300>] ? get_mapping_page+0x10/0x60 [logfs]
[<
f8095aa0>] ? logfs_load_object_aliases+0x2e0/0x2f0 [logfs]
[<
f808e57d>] logfs_gc_segment+0x2ad/0x310 [logfs]
[<
f808e62a>] __logfs_gc_once+0x4a/0x80 [logfs]
[<
f808ed43>] logfs_gc_pass+0x683/0x6a0 [logfs]
[<
f8097a89>] logfs_mount+0x5a9/0x680 [logfs]
[<
c1126b21>] mount_fs+0x21/0xd0
[<
c10f6f6f>] ? __alloc_percpu+0xf/0x20
[<
c113da41>] ? alloc_vfsmnt+0xb1/0x130
[<
c113db4b>] vfs_kern_mount+0x4b/0xa0
[<
c113e06e>] do_kern_mount+0x3e/0xe0
[<
c113f60d>] do_mount+0x34d/0x670
[<
c10f2749>] ? strndup_user+0x49/0x70
[<
c113fcab>] sys_mount+0x6b/0xa0
[<
c142d87c>] syscall_call+0x7/0xb
Code: f8 e8 8b 93 39 c9 8b 45 f8 3e 0f ba 28 00 19 d2 85 d2 74 ca eb d0 0f 0b 8d 45 fc 89 44 24 04 c7 04 24 3d 9a 09 f8 e8 09 92 39 c9 <0f> 0b 8d 74 26 00 55 89 e5 3e 8d 74 26 00 8b 10 80 e6 01 74 09
EIP: [<
f809132a>] logfs_lock_write_page+0x6a/0x70 [logfs] SS:ESP 0068:
c7337b18
---[ end trace
96e67d5b3aa3d6ca ]---
The patch passes locked page to __logfs_write_inode. It calls function
logfs_get_wblocks() to pre-lock the page. This ensures any further
attempts to lock the page are ignored (esp from get_erase_count).
Acked-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Prasad Joshi [Sun, 30 Oct 2011 16:45:32 +0000 (22:15 +0530)]
logfs: set superblock shutdown flag after generic sb shutdown
While unmounting the file system LogFS calls generic_shutdown_super.
The function does file system independent superblock shutdown.
However, it might result in call file system specific inode eviction.
LogFS marks FS shutting down by setting bit LOGFS_SB_FLAG_SHUTDOWN in
super->s_flags. Since, inode eviction might call truncate on inode,
following BUG is observed when file system is unmounted:
------------[ cut here ]------------
kernel BUG at /home/prasad/logfs/segment.c:362!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU 3
Modules linked in: logfs binfmt_misc ppdev virtio_blk parport_pc lp
parport psmouse floppy virtio_pci serio_raw virtio_ring virtio
Pid: 1933, comm: umount Not tainted 3.0.0+ #4 Bochs Bochs
RIP: 0010:[<
ffffffffa008c841>] [<
ffffffffa008c841>]
logfs_segment_write+0x211/0x230 [logfs]
RSP: 0018:
ffff880062d7b9e8 EFLAGS:
00010202
RAX:
000000000000000e RBX:
ffff88006eca9000 RCX:
0000000000000000
RDX:
ffff88006fd87c40 RSI:
ffffea00014ff468 RDI:
ffff88007b68e000
RBP:
ffff880062d7ba48 R08:
8000000020451430 R09:
0000000000000000
R10:
dead000000100100 R11:
0000000000000000 R12:
ffff88006fd87c40
R13:
ffffea00014ff468 R14:
ffff88005ad0a460 R15:
0000000000000000
FS:
00007f25d50ea760(0000) GS:
ffff88007fd80000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000d05e48 CR3:
0000000062c72000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process umount (pid: 1933, threadinfo
ffff880062d7a000,
task
ffff880070b44500)
Stack:
ffff880062d7ba38 ffff88005ad0a508 0000000000001000 0000000000000000
8000000020451430 ffffea00014ff468 ffff880062d7ba48 ffff88005ad0a460
ffff880062d7bad8 ffffea00014ff468 ffff88006fd87c40 0000000000000000
Call Trace:
[<
ffffffffa0088fee>] logfs_write_i0+0x12e/0x190 [logfs]
[<
ffffffffa0089360>] __logfs_write_rec+0x140/0x220 [logfs]
[<
ffffffffa0089312>] __logfs_write_rec+0xf2/0x220 [logfs]
[<
ffffffffa00894a4>] logfs_write_rec+0x64/0xd0 [logfs]
[<
ffffffffa0089616>] __logfs_write_buf+0x106/0x110 [logfs]
[<
ffffffffa008a19e>] logfs_write_buf+0x4e/0x80 [logfs]
[<
ffffffffa008a6b8>] __logfs_write_inode+0x98/0x110 [logfs]
[<
ffffffffa008a7c4>] logfs_truncate+0x54/0x290 [logfs]
[<
ffffffffa008abfc>] logfs_evict_inode+0xdc/0x190 [logfs]
[<
ffffffff8115eef5>] evict+0x85/0x170
[<
ffffffff8115f126>] iput+0xe6/0x1b0
[<
ffffffff8115b4a8>] shrink_dcache_for_umount_subtree+0x218/0x280
[<
ffffffff8115ce91>] shrink_dcache_for_umount+0x51/0x90
[<
ffffffff8114796c>] generic_shutdown_super+0x2c/0x100
[<
ffffffffa008cc47>] logfs_kill_sb+0x57/0xf0 [logfs]
[<
ffffffff81147de5>] deactivate_locked_super+0x45/0x70
[<
ffffffff811487ea>] deactivate_super+0x4a/0x70
[<
ffffffff81163934>] mntput_no_expire+0xa4/0xf0
[<
ffffffff8116469f>] sys_umount+0x6f/0x380
[<
ffffffff814dd46b>] system_call_fastpath+0x16/0x1b
Code: 55 c8 49 8d b6 a8 00 00 00 45 89 f9 45 89 e8 4c 89 e1 4c 89 55
b8 c7 04 24 00 00 00 00 e8 68 fc ff ff 4c 8b 55 b8 e9 3c ff ff ff <0f>
0b 0f 0b c7 45 c0 00 00 00 00 e9 44 fe ff ff 66 66 66 66 66
RIP [<
ffffffffa008c841>] logfs_segment_write+0x211/0x230 [logfs]
RSP <
ffff880062d7b9e8>
---[ end trace
fe6b040cea952290 ]---
Therefore, move super->s_flags setting after the fs-indenpendent work
has been finished.
Reviewed-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Prasad Joshi [Sat, 28 Jan 2012 06:06:06 +0000 (11:36 +0530)]
logfs: take write mutex lock during fsync and sync
LogFS uses super->s_write_mutex while writing data to disk. Taking the
same mutex lock in sync and fsync code path solves the following BUG:
------------[ cut here ]------------
kernel BUG at /home/prasad/logfs/dev_bdev.c:134!
Pid: 2387, comm: flush-253:16 Not tainted 3.0.0+ #4 Bochs Bochs
RIP: 0010:[<
ffffffffa007deed>] [<
ffffffffa007deed>]
bdev_writeseg+0x25d/0x270 [logfs]
Call Trace:
[<
ffffffffa007c381>] logfs_open_area+0x91/0x150 [logfs]
[<
ffffffff8128dcb2>] ? find_level.clone.9+0x62/0x100
[<
ffffffffa007c49c>] __logfs_segment_write.clone.20+0x5c/0x190 [logfs]
[<
ffffffff810ef005>] ? mempool_kmalloc+0x15/0x20
[<
ffffffff810ef383>] ? mempool_alloc+0x53/0x130
[<
ffffffffa007c7a4>] logfs_segment_write+0x1d4/0x230 [logfs]
[<
ffffffffa0078f8e>] logfs_write_i0+0x12e/0x190 [logfs]
[<
ffffffffa0079300>] __logfs_write_rec+0x140/0x220 [logfs]
[<
ffffffffa0079444>] logfs_write_rec+0x64/0xd0 [logfs]
[<
ffffffffa00795b6>] __logfs_write_buf+0x106/0x110 [logfs]
[<
ffffffffa007a13e>] logfs_write_buf+0x4e/0x80 [logfs]
[<
ffffffffa0073e33>] __logfs_writepage+0x23/0x80 [logfs]
[<
ffffffffa007410c>] logfs_writepage+0xdc/0x110 [logfs]
[<
ffffffff810f5ba7>] __writepage+0x17/0x40
[<
ffffffff810f6208>] write_cache_pages+0x208/0x4f0
[<
ffffffff810f5b90>] ? set_page_dirty+0x70/0x70
[<
ffffffff810f653a>] generic_writepages+0x4a/0x70
[<
ffffffff810f75d1>] do_writepages+0x21/0x40
[<
ffffffff8116b9d1>] writeback_single_inode+0x101/0x250
[<
ffffffff8116bdbd>] writeback_sb_inodes+0xed/0x1c0
[<
ffffffff8116c5fb>] writeback_inodes_wb+0x7b/0x1e0
[<
ffffffff8116cc23>] wb_writeback+0x4c3/0x530
[<
ffffffff814d984d>] ? sub_preempt_count+0x9d/0xd0
[<
ffffffff8116cd6b>] wb_do_writeback+0xdb/0x290
[<
ffffffff814d984d>] ? sub_preempt_count+0x9d/0xd0
[<
ffffffff814d6208>] ? _raw_spin_unlock_irqrestore+0x18/0x40
[<
ffffffff8105aa5a>] ? del_timer+0x8a/0x120
[<
ffffffff8116cfac>] bdi_writeback_thread+0x8c/0x2e0
[<
ffffffff8116cf20>] ? wb_do_writeback+0x290/0x290
[<
ffffffff8106d2e6>] kthread+0x96/0xa0
[<
ffffffff814de514>] kernel_thread_helper+0x4/0x10
[<
ffffffff8106d250>] ? kthread_worker_fn+0x190/0x190
[<
ffffffff814de510>] ? gs_change+0xb/0xb
RIP [<
ffffffffa007deed>] bdev_writeseg+0x25d/0x270 [logfs]
---[ end trace
0211ad60a57657c4 ]---
Reviewed-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Joern Engel [Sun, 20 Nov 2011 16:59:01 +0000 (22:29 +0530)]
logfs: Prevent memory corruption
This is a bad one. I wonder whether we were so far protected by
no_free_segments(sb) usually being smaller than LOGFS_NO_AREAS.
Found by Dan Carpenter <dan.carpenter@oracle.com> using smatch.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Prasad Joshi [Sat, 26 Nov 2011 05:30:47 +0000 (11:00 +0530)]
logfs: update page reference count for pined pages
LogFS sets PG_private flag to indicate a pined page. We assumed that
marking a page as private is enough to ensure its existence. But
instead it is necessary to hold a reference count to the page.
The change resolves the following BUG
BUG: Bad page state in process flush-253:16 pfn:6a6d0
page flags: 0x100000000000808(uptodate|private)
Suggested-and-Acked-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Eric W. Biederman [Thu, 26 Jan 2012 14:04:53 +0000 (14:04 +0000)]
net caif: Register properly as a pernet subsystem.
caif is a subsystem and as such it needs to register with
register_pernet_subsys instead of register_pernet_device.
Among other problems using register_pernet_device was resulting in
net_generic being called before the caif_net structure was allocated.
Which has been causing net_generic to fail with either BUG_ON's or by
return NULL pointers.
A more ugly problem that could be caused is packets in flight why the
subsystem is shutting down.
To remove confusion also remove the cruft cause by inappropriately
trying to fix this bug.
With the aid of the previous patch I have tested this patch and
confirmed that using register_pernet_subsys makes the failure go away as
it should.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Thu, 26 Jan 2012 14:02:55 +0000 (14:02 +0000)]
netns: Fail conspicously if someone uses net_generic at an inappropriate time.
By definition net_generic should never be called when it can return
NULL. Fail conspicously with a BUG_ON to make it clear when people mess
up that a NULL return should never happen.
Recently there was a bug in the CAIF subsystem where it was registered
with register_pernet_device instead of register_pernet_subsys. It was
erroneously concluded that net_generic could validly return NULL and
that net_assign_generic was buggy (when it was just inefficient).
Hopefully this BUG_ON will prevent people to coming to similar erroneous
conclusions in the futrue.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 28 Jan 2012 01:40:18 +0000 (20:40 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless
Rusty Russell [Fri, 27 Jan 2012 21:40:23 +0000 (08:10 +1030)]
lguest: remove reference from Documentation/virtual/00-INDEX
We're in tools/lguest now.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Jason Wang [Fri, 20 Jan 2012 08:17:08 +0000 (16:17 +0800)]
virtio: correct the memory barrier in virtqueue_kick_prepare()
Use virtio_mb() to make sure the available index to be exposed before
checking the the avail event. Otherwise we may get stale value of
avail event in guest and never kick the host after.
Note: this fixes a bug introduced by
ee7cd8981e15bcb365fc762afe3fc47b8242f630.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Jason Wang [Fri, 20 Jan 2012 08:16:59 +0000 (16:16 +0800)]
virtio: fix typos of memory barriers
Note: this fixes a bug introduced recently in
7b21e34fd1c272e3a8c3846168f2f6287a4cd72b.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pawel Moll [Thu, 26 Jan 2012 10:47:11 +0000 (11:47 +0100)]
ARM: 7304/1: ioremap: fix boundary check when reusing static mapping
Since commit
576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add
generic ioremap optimization by reusing static mappings" ioremap()
is trying to reuse existing static mapping when possible.
The condition checking boundaries of the requested and existing
mappings didn't take in-page offset into consideration though,
which lead to obscure and hard to debug problems when requested
mapping crossed end of the static one.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Konrad Rzeszutek Wilk [Wed, 25 Jan 2012 05:13:20 +0000 (00:13 -0500)]
xen/granttable: Disable grant v2 for HVM domains.
As proper scaffolding for supporting error status is not yet
implemented.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000400
IP: [<
ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40
PGD
32aa3067 PUD
32a87067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU 0
Modules linked in: sg sr_mod cdrom ata_generic ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront
cmd
Pid: 2307, comm: ip Not tainted 3.3.0-rc1 #1 Xen HVM domU
RIP: 0010:[<
ffffffff81375ae9>] [<
ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40
RSP: 0018:
ffff88003be03d38 EFLAGS:
00010206
RAX:
0000000000000000 RBX:
ffff880033210640 RCX:
0000000000000040
RDX:
0000000000002000 RSI:
0000000000000000 RDI:
0000000000000200
RBP:
ffff88003be03d38 R08:
0000000000000101 R09:
0000000000000000
R10:
dead000000100100 R11:
0000000000000000 R12:
ffff88003be03e48
R13:
0000000000000001 R14:
ffff880039461c00 R15:
0000000000000200
FS:
00007fb1f84ec700(0000) GS:
ffff88003be00000(0000) knlGS:
0000000000000000
...
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 27 Jan 2012 16:14:02 +0000 (11:14 -0500)]
Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3
* commit 'v3.3-rc1': (9775 commits)
Linux 3.3-rc1
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
uml: fix compile for x86-64
MPILIB: Add a missing ENOMEM check
tpm: fix (ACPI S3) suspend regression
nvme: fix merge error due to change of 'make_request_fn' fn type
xen: using EXPORT_SYMBOL requires including export.h
gpio: tps65910: Use correct offset for gpio initialization
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
tg3: Fix single-vector MSI-X code
openvswitch: Fix multipart datapath dumps.
ipv6: fix per device IP snmp counters
...
Linus Torvalds [Fri, 27 Jan 2012 15:56:25 +0000 (07:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
gma500: Fix suspend/resume functions
drm/exynos: fixed pm feature for fimd module.
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
drm/exynos: use release_mem_region instead of release_resource
agp: fix scratch page cleanup
drm/i915: fixup forcewake spinlock fallout in drpc debugfs function
drm/i915: debugfs: show semaphore registers also on gen7
drm/i915: allow userspace forcewake references also on gen7
drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.
drm/i915: Correct debugfs printout for RC1e.
Revert "drm/i915: Work around gen7 BLT ring synchronization issues."
drm/i915: rip out the HWSTAM missed irq workaround
drm/i915: paper over missed irq issues with force wake voodoo
drm/i915: Hold gt_lock across forcewake register reads
drm/i915: Hold gt_lock during reset
drm/i915: Move reset forcewake processing to gen6_do_reset
drm/i915: protect force_wake_(get|put) with the gt_lock
drm/i915: convert force_wake_get to func pointer in the gpu reset code
...
Linus Torvalds [Fri, 27 Jan 2012 15:53:06 +0000 (07:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix silent output on Haier W18 laptop
ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID
ALSA: hda - Fix silent output on ASUS A6Rp
ALSA: Fix memory leak on error in snd_compr_set_params()
ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support
Chris Mason [Wed, 25 Jan 2012 18:47:40 +0000 (13:47 -0500)]
Btrfs: fix reservations in btrfs_page_mkwrite
Josef fixed btrfs_page_mkwrite to properly release reserved
extents if there was an error. But if we fail to get a reservation
and we fail to dirty the inode (for ENOSPC reasons), we'll end up
trying to release a reservation we never had.
This makes sure we only release if we were able to reserve.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Ryan Mallon [Fri, 27 Jan 2012 06:28:24 +0000 (17:28 +1100)]
gma500: Fix suspend/resume functions
Both the suspend and resume functions incorrectly set psbfb =
to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix
this by moving the assignment of psbfb inside the loop and removing the
initialisation of fb.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seth Heasley [Tue, 24 Jan 2012 00:40:55 +0000 (16:40 -0800)]
watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDs
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Sat, 21 Jan 2012 07:08:38 +0000 (15:08 +0800)]
watchdog: via_wdt: Set min_timeout and max_timeout for wdt_dev
Let the watchdog core to check the valid value range of min_timeout/max_timeout.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Masanari Iida [Fri, 20 Jan 2012 14:56:19 +0000 (23:56 +0900)]
watchdog: Fix typo "unexpectdly"
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c
and stmp3xxx_wdt.c
Signed-off-by: Masanari Iida<standby24x7@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Wed, 18 Jan 2012 11:26:43 +0000 (19:26 +0800)]
watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wafwdt_stop() to disable watchdog.
Call wafwdt_start() while receiving WDIOS_ENABLECARD option.
Current code has reverse behavior.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Wed, 18 Jan 2012 11:25:01 +0000 (19:25 +0800)]
watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wm8350_wdt_stop() to disable watchdog.
Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option.
Current code has reverse behavior.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Wed, 18 Jan 2012 02:46:52 +0000 (10:46 +0800)]
watchdog: Return proper error in nuc900wdt_probe if misc_register fails
Return proper error instead of 0 if misc_register fails
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Wed, 18 Jan 2012 02:45:20 +0000 (10:45 +0800)]
watchdog: Staticise nuc900_wdt
It is only used in this driver, so no need to make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Axel Lin [Sat, 14 Jan 2012 11:34:34 +0000 (19:34 +0800)]
watchdog: via_wdt: Staticise wdt_pci_table
It is only used in this driver, so no need to make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marc Vertes <marc.vertes@sigfox.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Shubhrajyoti D [Wed, 11 Jan 2012 14:20:18 +0000 (19:50 +0530)]
watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disable
Currently the watchdog driver calls the pm_runtime_enable and never
the disable. This may cause a warning when pm_runtime_enable
checks for the count match.
Also fixes the error
/build/watchdog # insmod omap_wdt.ko
[ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable!
[ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
/build/watchdog #
Attempting to fix the same by calling pm_runtime_disable.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Julia Lawall [Tue, 27 Dec 2011 14:01:29 +0000 (15:01 +0100)]
watchdog: dw_wdt.c: use devm_request_and_ioremap
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.
The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@nm@
expression myname;
identifier i;
@@
struct platform_driver i = { .driver = { .name = myname } };
@@
expression dev,res,size;
expression nm.myname;
@@
-if (!devm_request_mem_region(dev, res->start, size,
- \(res->name\|dev_name(dev)\|myname\))) {
- ...
- return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
when != res->start
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Julia Lawall [Tue, 27 Dec 2011 14:01:28 +0000 (15:01 +0100)]
watchdog: imx2_wdt.c: use devm_request_and_ioremap
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.
The variable res_size is then no longer needed.
The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@nm@
expression myname;
identifier i;
@@
struct platform_driver i = { .driver = { .name = myname } };
@@
expression dev,res,size;
expression nm.myname;
@@
-if (!devm_request_mem_region(dev, res->start, size,
- \(res->name\|dev_name(dev)\|myname\))) {
- ...
- return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
when != res->start
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Dave Airlie [Fri, 27 Jan 2012 07:16:27 +0000 (07:16 +0000)]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes
* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
drm/exynos: fixed pm feature for fimd module.
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
drm/exynos: use release_mem_region instead of release_resource