di: increase di_cma for two channel di [1/2]

PD#SWPL-18329

Problem:
enable two channel di

Solution:
increase di_cma for two channel di

Verify:
Verify on u212

Change-Id: I2ec87a52fc3e3beea5daae80c24d877385ec6818
Signed-off-by: jintao xu <jintao.xu@amlogic.com>

deinterlace: fix buf for multi-view [1/1]

PD#SWPL-17405

Problem:
use di post write for multi-view;

Solution:
1. fix alloc mem err;
2. fix que out err;

Verify:
U212

Change-Id: I8fc4672aebfbde3d2809a1dc4e77e43e9e3a93fa
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>

sw_sync: fix video_composer fence timeout issue [1/1]

PD#SWPL-18237

Problem:
SF poll sync-a and sync-b, then merge them to sync-c.
sync-c refer the sync-b's fence in sync_merge function.
SF close sync-a, fence-a was released.
SF close sync-b, it just remove sync_pt from the timeline's
active_list, fence-b was not released due to the reference count.
OMX poll the sync-c, call fence_add_callback, but it will not
call enable_signaling because SF has polled fence-b.
It will lead OMX fence wait timeout.

Solution:
when SF call fence_remove_callback,
clear the FENCE_FLAG_ENABLE_SIGNAL_BIT.

Verify:
U212

Change-Id: I2ff690e5f73067b9289b9cbc35fa34a6362f0dfa
Signed-off-by: Ao Xu <ao.xu@amlogic.com>

deinterlace: for multi-view [1/1]

PD#SWPL-17405

Problem:
use di post write for multi-view;

Solution:
1. disable first frame bypass;
2. disable di recycle keep buf by self;
3. clear some print information;

Verify:
U212

Change-Id: Ibcad6c3e46fed2c94cd41638ffaf44dc7979c74f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>

vpp: fix afbc mif setting error caused vd2 display abnormal [1/1]

PD#SWPL-17687

Problem:
afbc vd2 mif width size set error

Solution:
fix afbc vd2 mif setting error issue

Verify:
Verify on X301

Change-Id: I4e24b58ab581e2f15fae1becb7120b6bbc951175
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 7f43e78548f34f26d9bcaae7995a5b6c6365b5d7)

vpp: fix afbc mif setting error caused video display abnormal [1/1]

PD#SWPL-17687

Problem:
afbc mif width size set error

Solution:
fix afbc mif setting error issue

Verify:
Verify on X301

Change-Id: I76e32cf6e86cdfa30b7d48f710c51a2032a66fa1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 8900537c81fb326bf2db8f1fa9bd62025c57b898)

DV: display black at smpte mode [2/2]

PD#SWPL-16027

Problem:
last_dst_format is wrong, it is DOVI even if on HDR TV

Solution:
Correct last_dst_format

Verify:
sm1

Change-Id: I77648ca989d3ff552cb4040d9f859d970eac7d98
Signed-off-by: yao liu <yao.liu@amlogic.com>
(cherry picked from commit ad3efd046fc08b6784cdd5184260edfc2acc85f4)

osd: update osd freescaler reg every hwc cmd [1/1]

PD#SWPL-17309

Problem:
do switch resolution test, sc regs miss-set caused display garbage

Solution:
update osd freescaler reg every hwc cmd

Verify:
ac214

Change-Id: I4c09094a477442b6f9f7bd782f9360d98eff299c
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 7f7f09a1d6e305b1e9f219f5441e0844b39e7ac7)

vpp: fix video afbc crop setting error [1/1]

PD#SWPL-17266

Problem:
video afbc crop error setting caused display garbage

Solution:
fix video afbc crop setting error

Verify:
on TL1

Change-Id: Ida76aa4d9620b05c538ca522435648e88d531201
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 70e1a798999eef093fd023abbbdd2502b48832e6)

osd: add canvas alignment for line length [1/4]

PD#SWPL-16902

Problem:
garbage screen for portrait panel in recovery mode

Solution:
add canvas alignment for line length
recovery takes it as framebuffer row_bytes

Verify:
g12b-w400

Change-Id: I9e94df3a7294fa3e388390e41eeb44e0588ec9d2
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
(cherry picked from commit 0b339b85f174b00cf213e9aaaa439591e6f279e5)

vpp: vpp video path vframe support RGB mode [1/1]

PD#SWPL-15879

Problem:
video patch not support RGB mode

Solution:
vpp video path vframe support RGB mode

Verify:
TL1

Change-Id: Ic86be3eb9163e7e34a3f18886a5e87e8e1bab6fe
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 8e7b325aee3ea07c68ee350287eb26f4fc19d41f)

video: fixed video coverity error [1/1]

PD#SWPL-16572

Problem:
fixed video coverity error

Solution:
fixed video coverity error

Verify:
coverity check

Change-Id: I6c1d865b72148d9f4083300826ef023579cbdb11
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 8babbb3dbdaf0f75d23b0fce031329c32d00920a)

osd: fixed osd coverity error [1/1]

PD#SWPL-13983

Problem:
fixed osd coverity error

Solution:
fixed osd coverity error

Verify:
coverity check

Change-Id: I5689930d4112493827dc07e22aa5d086dc2104d7
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
(cherry picked from commit 4efcc5b340309d92fb79c7d6f473931327436244)

dts: modify display_size_default for recovery buffer [4/4]

PD#SWPL-16902

Problem:
garbage screen for portrait panel in recovery mode

Solution:
modify display_size_default for recovery layout

Verify:
g12b-w400

Change-Id: Id42c8ed3ec824fdf00a598b25bde9c1f8383e532
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
(cherry picked from commit dffd6b54270d26bd1d8902ddf256a036bc779bd1)

gdc: fix gdc coverity issue [1/1]

PD#SWPL-13979

Problem:
coverity defect cleanup for gdc

Solution:
DEADCODE on aml_dmabuf_ops_attach()
RESOURCE_LEAK on aml_dma_alloc()
REVERSE_INULL on aml_dma_mmap()
USE_AFTER_FREE on aml_dma_put()
CHECKED_RETURN on gdc_platform_probe()
FORWARD_NULL on gdc_process_ex_info()/gdc_process_with_fw()
UNINIT on gdc_process_ex_info()/gdc_process_with_fw()
NO_EFFECT on gdc_log()

Verify:
coverity check

Change-Id: Iafd7eb5f74792300c68c50ffc5d0e36063cce906
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
(cherry picked from commit b28a8ac621c428437199386895a7ac3012e52905)

ge2d: fix ge2d coverity issue [1/1]

PD#SWPL-13975

Problem:
coverity defect cleanup for ge2d

Solution:
DEADCODE on aml_dmabuf_ops_attach()
RESOURCE_LEAK on aml_dma_alloc()
REVERSE_INULL on aml_dma_mmap()
USE_AFTER_FREE on aml_dma_put()
COPY_PASTE_ERROR&FORWARD_NULL on build_ge2d_config()

Verify:
coverity check

Change-Id: I1b80cb993254adb1721dfb2e5b25db0248dca1a6
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
(cherry picked from commit 801723a61128d84861d64ee5336e6054169fea8b)

dv: improve the dv process flow [1/1]

PD#SWPL-18116

Problem:
Under keeping frame case, dv toggle frame with wrong
mode, it may cause non-dv effect .

Solution:
Improve the toggle flow , pass the correct mode into
dv driver. Then using the last meta data

Verify:
Verified on u212

Change-Id: I456bb16e16810c166aba23d07a3296595032861e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
(cherry picked from commit 7595b454438eddfd6332780a4109678730f831ab)

dv: add dv target output mode [1/1]

PD#SWPL-16861

Problem:
HDR core get the wrong dv output state when vd1/vd switching.
It caused the HDR core setting incorret.

Solution:
Add the new interface to update the correct state.

Verify:
Verified on AC213

Change-Id: I3df18b967257ccfcb57c110b4dbc79100d290a80
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
(cherry picked from commit 9d31efae4a55eadf0beb62c404adb427fdd7d4ea)

vpp: display frame_width/height info for video_composer path [1/1]

PD#SWPL-17616

Problem:
in video_composer path, frame_width/height is NA

Solution:
display frame_width/height info for video_composer path

Verify:
franklin

Change-Id: If334ca8186ee4b47ad0643f11c7ba1b0ea051f7f
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

hdmitx: correct the threshold value of rxsense [1/1]

PD#SWPL-17841

Problem:
need correct the threshold value of rxsense

Solution:
correct the threshold value of rxsense, regress OTT-1968 to trunk

Verify:
G12/U212

Change-Id: I53f370cf51c0ad39e92fd64a0cc98cc4680eea4d
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdmitx: revert original hpd_state mark [1/1]

PD#SWPL-17710

Problem:
Suppose hdmitx already output in uboot, and next kernel boots up,
the output will disable and then enable

Solution:
When hdmitx hpd_states initializes, read edid when hpd is high

Verify:
G12/U212

Change-Id: I538b8af2d59a7b2b34739f14d0b0cb6fd89aed2e
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdmitx: Fix parsing of HDR10plus and Dovi VSVDBs [1/1]

PD#SWPL-17786

Problem:
No dolby vision on latest Vizio TVs providing an EDID containing
both dolby vision and HDR10plus VSVDBs in the EDID.

Solution:
If an EDID contains both HDR10plus and Dovi VSVDBs, we are
incorrectly resetting both dovi and hdr10plus parsed info structs.
As a result, we are only left with the parsed info of the later
VSVDB in the EDID. So, if we have a hdr10plus VSVDB after dovi
VSVDB, dovi info will be reset while parsing for hdr10plus, and
we will not report any dovi capabilities to the frameworks. This
is what is happening on these TVs in question.

Parse HDR10plus and Dovi VSVDBs independently of one another. Do
not reset parsed info of one while parsing for the other.

Since Dovi->HDR10+->Dovi transitions are not defined, send zero
drm/vsif packets while exiting HDR10+ playback if going to dovi
mode next.

Verify:
HDR10plus and Dovi capabilities can be simultaneously and correctly
reported to the frameworks.

Change-Id: I7a344638e5a923c88ef23f0b3a03480c5a564548
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdmitx: add a fake hpd for system test [1/1]

PD#SWPL-16891

Problem:
For automatical test, the HDMI cable are always connected between Tx and Rx
without manully action.

Solution:
add a fake hpd for system test
echo 0[1] > /sys/class/amhdmitx/amhdmitx0/fake_plug

Verify:
G12/U212

Change-Id: I826fc0094845a13066a1535a4a87727b4ecad452
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
(cherry picked from commit e764ebfccc9502eb027f20527b58f7d4f509d1fd)

hdmitx: update edid attach after reading once [1/1]

PD#SWPL-17476

Problem:
After kernel boots up, there will no edid info for vinfo

Solution:
Need update edid attach after reading once
In kernel init, hdmitx / vout / edid with attach once time
Normal replug, plugin / edid / uevent / mode setting / attach
Also, init DRM_DB[0] data.

Verify:
G12/U212

Change-Id: I188f0972c882a17efcbc568ef7d0db861b9b6c0a
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
(cherry picked from commit 1c185cb0c069638c6391f424637f57abdaf99570)

hdmitx: optimize for power up flow [1/1]

PD#SWPL-17155

Problem:
box set env to 2160p30hz 422,12bit, connect to
Hisense LED50EC660US 4K TV which only support
maximum 3G mode, then power on box, the hpd is
low when run hdmitx hpd command, so hdmi is not
set. after enter kernel, vout set 2160p30hz
before edid is read, and the color space is
forcely changed to rgb, but the color depth is
still 12bit, so TV can't detect normally.

Solution:
keep hpd state low until edid read finishes,
so that the mode vout set is filtered by edid

Verify:
S905X3

Change-Id: I11d126c4a2165ffaf3892534b1602bad3d78618d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
(cherry picked from commit f0a8ac5dcd74b92919e9ae55dd88de781c567c91)

hdmitx: Coverity(upgraded) defect cleanup: hdmitx [1/1]

PD#SWPL-16574

Problem:
Coverity(upgraded) defect cleanup: hdmitx

Solution:
Modify code according to coverity

Verify:
verify on the board of U212

Change-Id: Iac69fb896dd22b38ae56b58701d6fd26aefe958c
Signed-off-by: Zhengrong Zhu <zhengrong.zhu@amlogic.com>
(cherry picked from commit cbbac9335c19d09c6bf50e6069d79f973129210a)

hdmitx: Playback HLG video color is abnormal during playing [1/1]

PD#SWPL-16374

Problem:
Playback HLG video color display is abnormal during playing

Solution:
Modify code related to color space.

Verify:
verify on the board of U212

Change-Id: Ie01ba1f9931a5e8f12bd1cfd70fd9ea752194f9b
Signed-off-by: Zhengrong Zhu <zhengrong.zhu@amlogic.com>
(cherry picked from commit 82f2f9ff78c08c1b51738501dac9c6f213d4b33f)

hdmitx: fix sda hold low issue [1/1]

PD#SWPL-8231

Problem:
When HDMI cable plugin, the SDA may hold low forever or for short time.

Solution:
Add sw_reset_flt reset to resolve hold low forever issue

Verify:
G12/Dongle

Change-Id: I53bbf704bb48a2cd3cc2ebef1444c69ad1623e87
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
(cherry picked from commit b5c467ea8c3f6cd180b0cd00fa6a5413252119d4)

cec: cec b ARB timing cause cec 9.6.1 fail [1/1]

PD#SWPL-17658

Problem:
ARB timing setting is too large, it will cause
cec cts 9.6.1 fail

Solution:
reducec ARB timing

Verify:
sm1-AC214

Change-Id: If6bab18b729fc6f1dc010aa6289dc3e887a0f6f6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

amvideo: add dv support for video_receiver [1/2]

PD#SWPL-17393

Problem:
video receiver has no dv vframe operation.

Solution:
Add dv vframe operation.

Verify:
Verifed by u212

Change-Id: I0caf24d85a0d6d8382c13d72d9a439390ac21047
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

media_module: h264 playback crash [1/1]

PD#SWPL-17322

Problem:
    h264 playback crash.

Solution:
    Determine wether file_vf is null

Verify:
    U212

Change-Id: I1643c43ef0eb55aa88beeb47b2f3c8c180b9a5a2
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>

osd: fix reboot quiescent caused screen blank issue [1/1]

PD#SWPL-17605

Problem:
in reboot quiescent, suspend & resume caused afbc_cfg
reg set err

Solution:
in resume, reset afbc_start to 0

Verify:
franklin

Change-Id: I6e019ee88a3cfeb5d39db4777a7c2ac6c9648b02
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

osd: modify register table update area [1/1]

PD#SWPL-16663

Problem:
display freezes and becomes slow/lags
while selecting PIP mode options in VLC app

Solution:
remove wait-vsync nearly vsync coming
use polling to avoid  long time waiting

Verify:
W400

Change-Id: I7498a68de3f6c45e0cd48aad2805f73a23adb7e6
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
(cherry picked from commit 6e8f000c86613d0c63712152c9fec3b219464fe6)

v4lvideo: fix cat dev panic [1/1]

PD#SWPL-17478

Problem:
cat /dev/video33 panic

Solution:
read return 0

Verify:
U212

Change-Id: Idcabf7eca7d99d020fb759261fd7f613da83b096
Signed-off-by: jintao xu <jintao.xu@amlogic.com>

video_composer: fix tunnel mode seek black screen [1/1]

PD#SWPL-17424

Problem:
tunnel mode seek black screen

Solution:
set block_policy 0 when sideband

Verify:
U212

Change-Id: Iac9aff1db39c0366178025fc06ca91571948fa7c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>

partiton: change Q partition table [1/7]

PD#SWPL-17483

Problem:
partition size is not enough

Solution:
1. add factory partition
2. change tee size to 32MB

Verify:
newton

Change-Id: I0a8cb2695fb67d1d6200f70864b31fcd7cee57bc
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>

v4l2: v4l2 vf video support [2/3]

PD#SWPL-16226

Problem:
v4l2 can not display on vf video

Solution:
add v4l2 vf video support

Verify:
U212

Change-Id: If04fc991edaa57c202f1adcf6b1be6d453bb2af9
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>

video_composer: add multiple video layer display. [1/1]

PD#SWPL-5991

Problem:
video_composer bringup

Solution:
add v4lvideo、dma to display on the video layer via video_composer

Verify:
on U212

Change-Id: Iec1b75cc8c9aa0475912148a0687d95250aeb8a0
Signed-off-by: jintao xu <jintao.xu@amlogic.com>

dv: graphic blend test failed [1/1]

PD#SWPL-16994

Problem:
DV in/DV out case, gmax is high

Solution:
Set gmax to 300 for DV in/DV out case
By the way, remove err code in osd

Verify:
SM1

Change-Id: I9b73d57d424dc7609d284811c01a0d809d49c974
Signed-off-by: yao liu <yao.liu@amlogic.com>

[Sabrina] HDMI compliance 7-10 at 222MHz fail [1/1]

PD#GH-57
BUG:138766274

Problem:
HDMI compliance 7-10 at 222MHz fail

Solution
Modify register [FF63C3A0]=33EB4252

Verify:
sabrina-P1

Change-Id: I285b54a9faa740fc4552910a946b187cf26b2237
Signed-off-by: Edward Ho <edward.ho@amlogic.com>

vpp: new vpp driver to support vd layer switch [1/1]

PD#SWPL-10060

Problem:
VD1 and VD2 used the fixed vfm path, it can not
switch the vfm path with frame base.

Solution:
1) Add new interface for set/get display path.
2) Using new vpp function which will remove the
dependency between vfm and vd mif.

Verify:
Verifed by U212, AC211

Change-Id: I84df441315005c8fa885ae83504e234f3f4a843f
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

dts: fixed dmx2 wrong irq in Q [1/1]

PD#RSP-287

Problem:
dmx2 IRQ is wrong in Q

Solution:
correct dmx2 IRQ num in Q

Verify:
local verify

Change-Id: I00b48755675cbf198087ac7f0825eea0597c6fe5
Signed-off-by: pengfei.liu <pengfei.liu@amlogic.com>

dts: add partition dts for ab_update in Q [1/10]

PD#SWPL-15306

Problem:
need to support ab_update in Q

Solution:
add partition dts for ab_update in Q

Verify:
franklin

Change-Id: I0b8e16f2cf95b8b817c7659f0ef1b9d5c13e8777
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>

hdmitx: rewrite allm / contenttype [1/1]

PD#SWPL-14891

Problem:
need rewrite allm / contenttype

Solution:
rewrite allm / contenttype

Verify:
G12/U212

Change-Id: I3a41c963b1ba359546ed1286cc5c587f579aa441
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdr: hdr policy default follow sink(always hdr). [1/1]

PD#SWPL-16581

Problem:
the policy is follow source(adaptive hdr).

Solution:
change the policy to follow sink(always hdr).

Verify:
verify by franklin.

Change-Id: Ic3608f296dca2975252586169c9d85b46d5c976e
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

hdmitx: rewrite edidinfo to vinfo [1/1]

PD#SWPL-14910

Problem:
When HDMI plugin, it will read edid, parse edid, (and here dv mode maybe changed),
notify, etc...

Solution:
rewrite edidinfo to vinfo and update when tx mode is ready

Verify:
G12/U212

Change-Id: I81eb1943f6444fd2c87e0353f6e2782bd9c6c9c1
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
(cherry picked from commit 967b21510a9c046bb89d559524c3753f958e16bf)

dts: fix the error of gxl_p212_1g.dts. [1/1]

PD#SWPL-12224

Problem:
have the errors in gxl_p212_1g.dts.

Solution:
fix the errors.

Verify:
build pass.

Change-Id: I8b87213392f8ca79dbf83c2ddfd15dae63627577
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

vdin: tm2,add h/v shrink functionality [1/1]

PD#SWPL-15510

Problem:
small path of double write needs h/v shrink

Solution:
add to driver

Verify:
verified by t962x3_ab301

Change-Id: I1b2d2a5062cb092be681f4e15623c5ff58846714
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>

pagetrace: fix /proc/pagetrace lost in 64bit os [1/1]

PD#SWPL-14800

Problem:
/proc/pagetrace is not exist in 64bit kernel.

Solution:
Using right macro for create fs node.

Verify:
x301

Change-Id: I27b8db9a349f37db4bc0d6752b06f3d6a6a6c46c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

ethernet: improve ethernet connect quality [1/1]

PD#SWPL-16498

Problem:
ethernet connect quality not good enough

Solution:
disable adjust logic

Verify:
AB311

Change-Id: I63db4e756006baf8818d7f35aeb1fd1e64fd797b
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>

ge2d: disable matrix for fillrect function [1/1]

PD#SWPL-14823

Problem:
ge2d FILLRECTANGLE operation not working properly
if src and dst are in different color spaces (yuv&rgb)

Solution:
disable matrix for this function

Verify:
ae400

Change-Id: Id11d96191e9e214506bd13621777499e35e216b2
Signed-off-by: Cao Jian <jian.cao@amlogic.com>

hdr: default disable hdr hist module [1/1]

PD#SWPL-16107

Problem:
tm2 default hdr hist module enable,
it cause power consumption is high.

Solution:
1. default disable hdr hist module
2. if enable hdr2sdr, enable hist module

Verify:
verify on TM2

Change-Id: I648e9d5ac6739c1b6ef04db5ac3aec6e8f695cf7
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

mtd: nand: support new slc nand [2/2]

PD#SWPL-14719

Problem:
4Gb SLC nand MT29F4G08ABAFAWP,MX30LF4G28AD requsted by Market

Solution:
add the nand id into amlogic nand flash id table

Verify:
AXG-S400

Change-Id: If2bd3cc90585b2a3cbcd500a9354cde4c65bc355
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>

DTS: TL1/TM2 internal phy led is H0/H1. [1/1]

PD#SWPL-16192

Problem:
ab301 ethernet can not link

Solution:
LED GPIO is GPIOH_0 and GPIOH_1
TL1 is the same gpio

Verify:
ab301

Change-Id: Id4e0a94a021d72d3b952d2dd15a86caf45a16ca0
Signed-off-by: qi duan <qi.duan@amlogic.com>

hdmirx: Coverity defect cleanup:hdmi rx [1/1]

PD#SWPL-15167

Problem:
Coverity defect cleanup:hdmi rx

Solution:
Modify code according to coverity

Verify:
verify on the board of x3011

Change-Id: I1f8bac51101a5ae1a8a27ffd14e899b75ab99c04
Signed-off-by: Zhengrong Zhu <zhengrong.zhu@amlogic.com>

dts: km3: add attestationdevidbox to more platforms [1/1]

PD#SWPL-12224

Problem:
Support Device ID attestation on multiple platforms

Solution:
1. Add new key slot, attestationdevidbox, to unify keys

Verify:
1. Android P + all android platforms
2. run cts -m CtsKeystoreTestCases -t \
android.keystore.cts.KeyAttestationTest#testDeviceIdAttestation

Change-Id: I95ba42b2df808a4aec5ad47d00ec9684c36e4ad3
Signed-off-by: Mingyen Hung <mingyen.hung@amlogic.com>

hdmirx: fix hdcp2.2 error after resume [1/1]

PD#SWPL-15872

Problem:
ESM init failed after boot-up twice

Solution:
Use the correct HPI address when request_mem_region called.

Verify:
TL1 4g ddr

Change-Id: I5fd30166b3a36e5f4a12b8b6b893df9c9f20ddaf
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>

drm: solve debug node write string issue [1/1]

PD#SWPL-15143

Problem:
userspace program use the write() syscall to write the node.
when write the strlen() length content, it will fail.

Solution:
use the buf[size] to instead of buf[size-1]

Verify:
U200

Change-Id: I886d9a1cbf3da459476bca76c9a5708ecbc20afe
Signed-off-by: Ao Xu <ao.xu@amlogic.com>

Revert "io: make register access in amvecm simple [1/1]"

This reverts commit 7436b7dc4acf29ea9549249cbdd2ef6df1b91e92.

revert this now, print_vpp_lut() stack is 1840, when this applied,
it will bigger than 1880. werror will be triggerd.

Change-Id: Ia7b084ee800081a75c70f4e6ea6ce739f113f2b8
Signed-off-by: zihuan.ling <zihuan.ling@amlogic.com>

vdin: vdin add dolby vision de-scramble & scramble

PD#SWPL-14888

Problem:
New feature, dolby source vdin have de-scramble,
scrable function

Solution:
add feature for dv de scramble function

Verify:
tm2 ab301

Change-Id: Ib7c10fcf53232c84411ae366618b2ddcd9948527
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

atv_demod: fix atv audio no output when line frequency offset over default [1/1]

PD#SWPL-16188, PD#TV-11641, PD#TV-10181, PD#TV-9714

Problem:
fix atv audio no output when line frequency offset over 200Hz.

Solution:
1.fix atv audio no output when line frequency offset over 200Hz.
2.atv demod version: [V2.15].

Verify:
verified by tl1.

Change-Id: Ic43c707d3401ea93909856ff83a6842e14f0fc61
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>

audio: fix might_sleep warning at bootup [1/1]

PD#SWPL-16123

Problem:
might_sleep() is triggered by regmap_read().

[    3.106894@0] Workqueue: events tl1_acodec_release_fast_mode_work_func
[    3.106903@0] [bc059af4+  16][<c020e3a8>] show_stack+0x20/0x24
[    3.106910@0] [bc059b1c+  40][<c05dff94>] dump_stack+0xb8/0xf4
[    3.106917@0] [bc059b44+  40][<c0258138>] ___might_sleep+0x1c8/0x208
[    3.106922@0] [bc059b6c+  40][<c02581ec>] __might_sleep+0x74/0xac
[    3.106928@0] [bc059bb4+  72][<c0393a80>] kmem_cache_alloc_trace+0x12c/0x2c0
[    3.106935@0] [bc059bfc+  72][<c06bd03c>] regcache_rbtree_write+0x2dc/0x4f0
[    3.106941@0] [bc059c1c+  32][<c06bbbd8>] regcache_write+0x64/0x6c
[    3.106945@0] [bc059c44+  40][<c06b9260>] _regmap_write+0x144/0x16c
[    3.106948@0] [bc059c64+  32][<c06bab4c>] regmap_write+0x4c/0x6c
[    3.106953@0] [bc059c74+  16][<c0c79088>] snd_soc_component_write+0x28/0x48
[    3.106958@0] [bc059c84+  16][<c0c790c4>] snd_soc_write+0x1c/0x20
[    3.106962@0] [bc059c9c+  24][<c0c7c0b0>] tl1_acodec_start_up+0x24/0x44
[    3.106967@0] [bc059cbc+  32][<c0c7c1b8>]
tl1_acodec_release_fast_mode_work_func+0x54/0xe4
[    3.106973@0] [bc059cfc+  64][<c0245dc8>] process_one_work+0x200/0x624
[    3.106977@0] [bc059d3c+  64][<c0246dc4>] worker_thread+0x58/0x5c4
[    3.106982@0] [bc059d94+  88][<c024c5c0>] kthread+0x128/0x144
[    3.106987@0] [00000000+   0][<c020885c>] ret_from_fork+0x14/0x38

Solution:
This is a mmio regmap constrain using spinlock_irq to protect the
critical read and write.
But if the default reg cache is not allocated, the read routine will
malloc() buffer which is non-atomic. That is the root cause of this warning.
So we add num_reg_defaults_raw to tell regmap to malloc the buffer at
initializing stage.

Verify:
TL1.

Change-Id: I42f87fa89bbe99762ada36337b5ed6565b06b891
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

deintlace: register setting default disable hdr2  [1/1]

PD#SWPL-16107

Problem:
cpu_after_eq(MESON_CPU_MAJOR_ID_TM2)default disable hdr2

Solution:
default disable hdr2,from VLSI feijun
DI_HDR2_HIST_CTRL, 0x5510
DI_HDR2_HIST_H_START_END, 0x10000
DI_HDR2_HIST_V_START_END, 0x0

Verify:
verify on x301_t96x2

Change-Id: Ib646111fb866570a75775534e446807f1e3b4a91
Signed-off-by: qianqian.cai <qianqian.cai@amlogic.com>

dts: add support s805y config. [2/3]

PD#SWPL-16193

Problem:
add support s805y config for anning.

Solution:
add support s805y config for anning.
Anning(P244) copy from P215, and change soc with s805y

Verify:
verify by anning.

Change-Id: I4e09521833f37d96066bf0643b0e99077cd0c7be
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

hdmitx: Coverity defect cleanup: VOUT [1/1]

PD#SWPL-13989

Problem:
Coverity defect cleanup: VOUT

Solution:
Modify code according to coverity

Verify:
verify on the board of U212

Change-Id: I787429350be37da84ccd85332e97d472f45d3826
Signed-off-by: Zhengrong Zhu <zhengrong.zhu@amlogic.com>

amlvideo2: Screen capture adds support for decoder data. [1/1]

PD#SWPL-16197

Problem:
The data from the decoder is not equipped with a canvas.

Solution:
screenshot adds support for vframes without canvas.

Verify:
on X301

Change-Id: I706b87d6f59da27ffda7ace0d3486d6d978a292a
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>

io: make register access in amvecm simple [1/1]

PD#SWPL-15713

Problem:
There are too many register access in vsync isr from pq

Solution:
Make register access quicker

Verify:
TL1

Change-Id: I72972ccb8f2cf1bd53eda7fc40697cb5df4f5ede
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>

cec: finetune cecb ARB rising time [1/1]

PD#SWPL-15616

Problem:
when cec bus conect other cec connector, may lose cec ARB

Solution:
finetune ARB rising time.

Verify:
tl1

Change-Id: Icf422505602f75307f0b91c7841f0aae5e09c22d
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdr: correct hdr10+ process path [1/1]

PD#SWPL-16139

Problem:
1. hdr10+ gen ebz curve error
2. hdr10+ process error

Solution:
1. fix hdr10+ ebz gen
2. correct hdr10+ process path

Verify:
verify on TL1

Change-Id: Ia33488ada2e0ebfe9b156f9f667188cf02164089
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

backlight: add bl policy support [1/1]

PD#TV-11347

Problem:
sometimes need power on from uboot state in kernel

Solution:
add bl policy to support different power on mode

Verify:
x301

Change-Id: I13c289523c6a77d713b3a770a5cdaf02afd01a11
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>

dts: km4: add attestationdevidbox to more platforms [1/1]

PD#SWPL-12224

Problem:
Support Device ID attestation on Marconi and Dalton

Solution:
1. Add new key slot, attestationdevidbox, to unify keys

Verify:
1. Android Q + (Marconi, Dalton)
2. run cts -m CtsKeystoreTestCases -t \
android.keystore.cts.KeyAttestationTest#testDeviceIdAttestation

Change-Id: I2c61422a56fd29c201a05a29871af5daeb612070
Signed-off-by: Mingyen Hung <mingyen.hung@amlogic.com>

audio: bringup a new resample module on SM1/TM2 [1/1]

PD#SWPL-5644

Problem:
bringup new hw resample modules on SM1/TM2

Solution:
bringup new hw resample modules on SM1/TM2
1) resample A is used for HDMIRX/SPDIFIN
2) resample B is used for LOOPBACK anti-aliasing
   if capture loopback data with 16KHz, enable it in dts.

Verify:
AB301

Change-Id: I0c2e403ff089a28e8d5695d854d13358ecffa313
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>

clk: tm2: disable the pcie pll internal module when suspend [1/1]

PD#SWPL-15470

Problem:
tm2 pcie pll power dissipation is high when suspend

Solution:
disable the pcie pll internal module when suspend

Verify:
tm2

Change-Id: I298a7a15c58ebd68c379b0281284d71425207b0e
Signed-off-by: Jian Hu <jian.hu@amlogic.com>

ethernet: switch to gpio when suspend [1/1]

PD#SWPL-16033

Problem:
save pwr when suspend

Solution:
switch to gpio when suspend

Verify:
AB311

Change-Id: I1186263c1fccc82ac4299d95d606d35f5ee7c171
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>

dv: remove the wrong operation for txlx when dv off [1/1]

PD#SWPL-5164

Problem:
Vsync operate the wrong registers on txlx chip.

Solution:
Add chip condition for txlx

Verify:
Verified on R311

Change-Id: Ic3c10b7ebdab9d72cc9f05fe68be2442a1be6200
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

audio: auge: add mixer for eARC RX/TX latency and capability [1/1]

PD#SWPL-6918

Problem:
lack function to read/write eARC RX/TX latency and capability

Solution:
add mixer for eARC RX set/get latency and capability
add mixer for eARC RX get latency and capability

Verify:
ab311

Change-Id: I0d8aa00af7d856493417dc881a1a8c40497b12a5
Signed-off-by: Xing Wang <xing.wang@amlogic.com>

mm: fix crash in vmap stack [1/1]

PD#SWPL-12145

Problem:
When switch IRQ stack, there is a 16 bytes miss match of irq
stack. This may cause context not match some times;

Solution:
Save sp to right place

Verify:
X301

Change-Id: I75dfa5208cb3cec050c1568ac78ae2e783ca106b
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

kasan: fix pc crash if open kasan with vmap stack [1/1]

PD#SWPL-10141

Problem:
If open KASAN, connect wifi, and auto-start apk dianshijia, it will
soon crash as:
[ 56.655524@2] Unable to handle kernel NULL pointer dereference
               at virtual address 00000050
[ 56.658155@2] pgd = d0104000
[ 56.661008@2] [00000050] *pgd=00000000
[ 56.664744@2] Internal error: Oops: 80000005 1 PREEMPT SMP ARM
               common(O) firmware(O) media_clock(O) tb_detect(O)
               dnlp_alg ldim_alg mxl661_fe_32(O)
[ 56.709028@2] CPU: 2 PID: 4930 Comm: kworker/u9:3 Tainted: O 4.9.113 #1
[ 56.716908@2] Hardware name: Generic DT based system
[ 56.721858@2] task: f2632bc0 task.stack: c2010000
[ 56.726530@2] PC is at 0x50
[ 56.729301@2] LR is at 0x0

Solution:
Fix wrong pmd check address

Verify:
TL1 X301

Change-Id: I85e01418789801e0ef7691a9d8963c233e115b28
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

hdmirx: Coverity defect cleanup:hdmi rx [1/1]

PD#SWPL-15167

Problem:
Coverity defect cleanup:hdmi rx

Solution:
Modify code according to coverity

Verify:
verify on the board of x3011

Change-Id: If325bcd7ca3a7f85cd17ac8b57e4a15284231ccc
Signed-off-by: Zhengrong Zhu <zhengrong.zhu@amlogic.com>

tvafe: vbi: fix coverity [1/1]

PD#SWPL-15873

Problem:
Coverity defect cleanup.

Solution:
Coverity defect cleanup.

Verify:
x301

Change-Id: I4c5c5e8d01dbd8eb3389937e45461775ab1ac4ca
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>

dts: increase codecmm to enable multiple encoder [1/1]

PD#SWPL-16131

Problem:
  codec memory too small to change video encode

Solution:
  increase codec memory size

Verify:
local

Change-Id: If09d00b97d607ba319c030516344dd3e9f96f7ec
Signed-off-by: Ruoran Xi <ruoran.xi@amlogic.com>

reserved_memory: change print of all reserved memory [1/1]

PD#SWPL-16049

Problem:
When boot, print information of all reserved memory is not nice
for reading.

Solution:
Change print format of reserved memory like:
        07400000 - 07500000,     1024 KB, ramoops@0x07400000
        05000000 - 05400000,     4096 KB, linux,secmon
        3f800000 - 40000000,     8192 KB, linux,meson-fb
        31c00000 - 3f800000,   225280 KB, linux,codec_mm_cma
        31c00000 - 31c00000,        0 KB, linux,codec_mm_reserved
        2e000000 - 30000000,    32768 KB, linux,ion-dev
        30800000 - 31c00000,    20480 KB, linux,vdin1_cma
        30000000 - 30800000,     8192 KB, linux,demod_cma
        2b800000 - 2e000000,    40960 KB, linux,di_cma
        2b400000 - 2b800000,     4096 KB, linux,emp_cma

Verify:
TL1 X301

Change-Id: I5a010118665a886896c7db8be2bb911813647e9e
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

dv: blank screen during Transition tests [1/1]

PD#SWPL-16051

Problem:
Soure changed from DV to sdr, but core1 lut
is not update due to stb_core_setting_update_flag
is reset when frame dropped by amvideo

Solution:
Don't clear stb_core_setting_update_flag until
it has been used.

Verify:
U212

Change-Id: Ib1e445653978583ddda35c266000e812463f3f77
Signed-off-by: yao liu <yao.liu@amlogic.com>

audio: wrong mclk_pad setting for TL1 [1/1]

PD#SWPL-16108

Problem:
Mclk_pad is set 0 by all three TDM module.
The result is that only the last one takes effect.

Solution:
Modify the mclk_pad setting and delete the unused one.

Verify:
TL1.

Change-Id: I2fa881e8ebcc2e7822dfbbea6a7ac0bfbc8ae0f9
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

Merge "atv_demod: fix atv non-std signal handle [1/1]" into bringup/amlogic-4.9/sync20190611_forQ

Merge "sdio: optimize sdio suspend/resume [1/1]" into bringup/amlogic-4.9/sync20190611_forQ

Merge "dv: do not reset the tv core when resolution changed [1/1]" into bringup/amlogic-4.9/sync20190611_forQ

atv_demod: fix atv non-std signal handle [1/1]

PD#TV-11542

Problem:
fix atv non std handle when video and audio are set at the same time.

Solution:
1.fix atv non std handle when video and audio are set at the same time.
2.atv demod version: [V2.14].
3.branch: amlogic-4.9-dev.

Verify:
verified by tl1.

Change-Id: I4bfc0e076ccde813329c315e4cbcead6e9bf6c94
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>

sdio: optimize sdio suspend/resume [1/1]

PD#SWPL-16036

Problem:
When the system starts up, wifi is turned on.
When we manually turn off wifi and start the
suspend & resume operation, we will find that
the sdio error is reported when we wake up

Solution:
Add the sdio_notify() interface to notify the
sdio controller when wifi is on/off, enabling
the keep_power standard to be configured when suspend.

Verify:
TL1

Change-Id: I48e0c31bf7ea80d3efd4b0d41b4af378e859dc15
Signed-off-by: Nan Li <nan.li@amlogic.com>

hdmitx: add hdr_priority [1/1]

PD#SWPL-14089

Problem:
Need add 'hdr_priority' to mask sysfs 'dv_cap'

Solution:
Parse the variable 'hdr_priority' from uboot environment

Verify:
G12/U212

Change-Id: I6fca18669c068ac793ca9230c6497b0ef2cbe07c
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

dv: do not reset the tv core when resolution changed [1/1]

PD#SWPL-5167

Problem:
Reset tv core will cause the display flashing.

Solution:
remove the reset operation

Verify:
Verified on R311

Change-Id: Id9aa97dd0462d04bb2d83e5f0247acf3bcaabcd7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

dts: ac214 disable spdifin [1/1]

PD#SWPL-16012

Problem:
spdifin gpio(GPIOH_5) conflict with HDMI

Solution:
don't use spdifin

Verify:
Android Q + Newton

Change-Id: Icb61bcab5421384b54ac03c697a16372e3e91577
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>

pq: add yuv full to rgb full feature [2/2]

PD#SWPL-15366

Problem:
according source type, add YUV full to RGB Full

Solution:
according source type, add YUV full to RGB Full

Verify:
TL1

Change-Id: I1afb7bc56161dee87d055a7686d99377db954be4
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

net: stmmac: use correct DMA buffer size in the RX descriptor

PD#TV-11316

[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]

We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.

Fix by using exact buffer sizes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: I32f3f0758ee6df0217dd9d1275c08b04163d811b
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Signed-off-by: zihuan.ling <zihuan.ling@amlogic.com>

net: stmmac: don't stop NAPI processing when dropping a packet

PD#TV-11316

[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]

Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.

If we drop a packet, we should just continue to the next one as long as
the budget allows.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: Ib13615c2e413af86519c1cec0a6638b88ceaf4de
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Signed-off-by: zihuan.ling <zihuan.ling@amlogic.com>

dts: km3: Device ID attestation for ac214 [1/1]

PD#SWPL-12224

Problem:
Need to add support for device ID attestation

Solution:
1. Add new key slot, attestationdevidbox, to unify keys

Verify:
1. Android Q + Newton↵
2. run cts -m CtsKeystoreTestCases -t \
   android.keystore.cts.KeyAttestationTest#testDeviceIdAttestation

Change-Id: If16a35af4b63d19dcecf1319d6f0ea974ce64dd2
Signed-off-by: Mingyen Hung <mingyen.hung@amlogic.com>

audio: external tdm-loopback [1/1]

PD#SH-1626

Problem:
Can not record ADC's i2s output from Loopback

Solution:
1. Fix the wrong reg config in TDM OE pin.
2. move the lr/sclk pad configuration to probe.

Verify:
SM1.

Change-Id: I01f419e4b0ba72fb7295641c6e7d9a189754c9d7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

tm2: dts: clean lcd config [1/1]

PD#SWPL-15948

Problem:
T962e2 hasn't lcd out

Solution:
delete lcd config in dts

Verify:
T962e2 platform

Change-Id: Ibc090f948c9cba2073e17b17ccbf706d154445ef
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>

audio: auge: improve compatibility for eARC RX/TX connection [1/1]

PD#SWPL-15189

Problem:
1. earc rx fails to connect to a sony tv
2. earc tx fails to connect to AVR-X4500H

Solution:
1. reset earc_rx pll
2. reduce comma_th

Verify:
ab311

Change-Id: I162b9697d151b682df01093cdc086330a97f8fab
Signed-off-by: Xing Wang <xing.wang@amlogic.com>

avsync: Clear video pts & pcr pts when ts' playback stops [1/1]

PD#TV-11272

Problem:
Switch to the ATV channel from DTV, the picture is stuck.

Solution:
Clear video pts & pcr pts.

Verify:
x30a4

Change-Id: Id265bfdfbd7e09d1423c9349de0596d4d742474c
Signed-off-by: hui an <hui.an@amlogic.com>