[PATCH] sched: move idle status calculation into rebalance_tick()

Perform the idle state determination in rebalance_tick.

If we separate balancing from sched_tick then we also need to determine the
idle state in rebalance_tick.

V2->V3
Remove useless idlle != 0 check. Checking nr_running seems
to be sufficient. Thanks Suresh.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: extract load calculation from rebalance_tick

A load calculation is always done in rebalance_tick() in addition to the real
load balancing activities that only take place when certain jiffie counts have
been reached.  Move that processing into a separate function and call it
directly from scheduler_tick().

Also extract the time slice handling from scheduler_tick and put it into a
separate function.  Then we can clean up scheduler_tick significantly.  It
will no longer have any gotos.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: disable interrupts for locking in load_balance()

Interrupts must be disabled for request queue locks if we want to run
load_balance() with interrupts enabled.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: remove staggering of load balancing

Timer interrupts already are staggered.  We do not need an additional layer of
time staggering for short load balancing actions that take a reasonably small
portion of the time slice.

For load balancing on large sched_domains we will add a serialization later
that avoids concurrent load balance operations and thus has the same effect as
load staggering.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: avoid taking rq lock in wake_priority_sleeper

Avoid taking the request queue lock in wake_priority_sleeper if there are no
running processes.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched domain: increase the SMT busy rebalance interval

With SMT, if the logical processor is busy, load balance happens for every
8msec(min)-16msec(max).  There is no need to do this often, as this is just
for fairness(to maintain uniform runqueue lengths) and default time slice
anyhow is 100msec.

Appended patch increases this interval to 64msec(min)-128msec(max) when the
logical processor is busy.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] move_task_off_dead_cpu() should be called with disabled ints

move_task_off_dead_cpu() requires interrupts to be disabled, while
migrate_dead() calls it with enabled interrupts.  Added appropriate
comments to functions and added BUG_ON(!irqs_disabled()) into
double_rq_lock() and double_lock_balance() which are the origin sources of
such bugs.

Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ched domain: move sched group allocations to percpu area

Move the sched group allocations to percpu area.  This will minimize cross
node memory references and also cleans up the sched groups allocation for
allnodes sched domain.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched.c: correct comment for this_rq_lock()

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Don't build some broken ISDN drivers on big endian MIPS

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: add to getdelays

Wire up the IO accounting into getdelays.c.

Usage:

To display I/O stats for each exitting task:

vmm:/home/akpm> ./getdelays -m0,1,2,3 -i -l
cpumask 0 maskset 1
printing IO accounting
listen forever
rm: read=8192, write=0, cancelled_write=0
cvs: read=733184, write=4255744, cancelled_write=4096
make: read=217088, write=0, cancelled_write=0
cc1: read=4263936, write=12288, cancelled_write=0
as: read=811008, write=8192, cancelled_write=0
gcc: read=323584, write=0, cancelled_write=12288
cc1: read=0, write=8192, cancelled_write=0
as: read=4096, write=4096, cancelled_write=0
gcc: read=16384, write=0, cancelled_write=4096
as: read=4096, write=4096, cancelled_write=0
gcc: read=16384, write=0, cancelled_write=8192
ld: read=1011712, write=16384, cancelled_write=0
collect2: read=626688, write=0, cancelled_write=0
gcc: read=204800, write=0, cancelled_write=0
cc1: read=0, write=8192, cancelled_write=0
as: read=4096, write=4096, cancelled_write=0
gcc: read=16384, write=0, cancelled_write=8192
ld: read=8192, write=16384, cancelled_write=0
collect2: read=49152, write=0, cancelled_write=0
gcc: read=0, write=0, cancelled_write=0
cc1: read=0, write=4096, cancelled_write=0
ld: read=4096, write=12288, cancelled_write=0
collect2: read=49152, write=0, cancelled_write=0
gcc: read=0, write=0, cancelled_write=0

To display I/O stats for a particular presently-running task:

vmm:/home/akpm> ./getdelays -i -p $(pidof crond)
printing IO accounting
crond: read=61440, write=0, cancelled_write=0

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] getdelays: various fixes

- Various cleanups

- Report errors to stderr, not stdout

- A printf was missing a \n and was hiding from me.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: via taskstats

Deliver IO accounting via taskstats.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cleanup taskstats.h

Fix weird whitespace mangling in taskstats.h

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: report in procfs

Add a simple /proc/pid/io to show the IO accounting fields.

Maybe this shouldn't be merged in mainline - the preferred reporting channel
is taskstats.  But given the poor state of our userspace support for
taskstats, this is useful for developer-testing, at least.  And it improves
the changes that the procps developers will wire it up into top(1).  Opinions
are sought.

The patch also wires up the existing IO-accounting fields.

It's a bit racy on 32-bit machines: if process A reads process B's
/proc/pid/io while process B is updating one of those 64-bit counters, process
A could see an intermediate result.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: direct-io

Account for direct-io.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting-read-accounting cifs fix

CIFS implements ->readpages and doesn't use read_cache_pages().  So wire the
read IO accounting up within CIFS.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting-read-accounting nfs fix

nfs's ->readpages uses read_cache_pages().  Wire it up there.

[wfg@mail.ustc.edu.cn: account only successful nfs/fuse reads]
Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: read accounting

Wire up read accounting for block devices, within submit_bio().

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: write-cancel accounting

Account for the number of byte writes which this process caused to not happen
after all.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: write accounting

Accounting writes is fairly simple: whenever a process flips a page from clean
to dirty, we accuse it of having caused a write to underlying storage of
PAGE_CACHE_SIZE bytes.

This may overestimate the amount of writing: the page-dirtying may cause only
one buffer_head's worth of writeout.  Fixing that is possible, but probably a
bit messy and isn't obviously important.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] clean up __set_page_dirty_nobuffers()

Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers()
and a few other places.  No functional changes.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] io-accounting: core statistics

The present per-task IO accounting isn't very useful.  It simply counts the
number of bytes passed into read() and write().  So if a process reads 1MB
from an already-cached file, it is accused of having performed 1MB of I/O,
which is wrong.

(David Wright had some comments on the applicability of the present logical IO accounting:

  For billing purposes it is useless but for workload analysis it is very
  useful

  read_bytes/read_calls  average read request size
  write_bytes/write_calls average write request size

  read_bytes/read_blocks ie logical/physical can indicate hit rate or thrashing
  write_bytes/write_blocks  ie logical/physical  guess since pdflush writes can
                                                be missed

  I often look for logical larger than physical to see filesystem cache
  problems.  And the bytes/cpusec can help find applications that are
  dominating the cache and causing slow interactive response from page cache
  contention.

  I want to find the IO intensive applications and make sure they are doing
  efficient IO.  Thus the acctcms(sysV) or csacms command would give the high
  IO commands).

This patchset adds new accounting which tries to be more accurate.  We account
for three things:

reads:

  attempt to count the number of bytes which this process really did cause
  to be fetched from the storage layer.  Done at the submit_bio() level, so it
  is accurate for block-backed filesystems.  I also attempt to wire up NFS and
  CIFS.

writes:

  attempt to count the number of bytes which this process caused to be sent
  to the storage layer.  This is done at page-dirtying time.

  The big inaccuracy here is truncate.  If a process writes 1MB to a file
  and then deletes the file, it will in fact perform no writeout.  But it will
  have been accounted as having caused 1MB of write.

  So...

cancelled_writes:

  account the number of bytes which this process caused to not happen, by
  truncating pagecache.

  We _could_ just subtract this from the process's `write' accounting.  But
  that means that some processes would be reported to have done negative
  amounts of write IO, which is silly.

  So we just report the raw number and punt this decision up to userspace.

Now, we _could_ account for writes at the physical I/O level.  But

- This would require that we track memory-dirtying tasks at the per-page
  level (would require a new pointer in struct page).

- It would mean that IO statistics for a process are usually only available
  long after that process has exitted.  Which means that we probably cannot
  communicate this info via taskstats.

This patch:

Wire up the kernel-private data structures and the accessor functions to
manipulate them.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pdc202xx_new: fix PLL/timing issues

Fix the CRC errors in the higher UltraDMA modes with the Promise PDC20268
and newer chips that always occur on non-x86 machines and when there are
more than 2 adapters on x86 machines.  Fix the overclocking issue for
PDC20269 and newer chips that occurs when an UltraDMA/133 capable drive is
connected.  Here's the summary of changes:

- add code to detect the PLL input clock detection and setup it output clock,
  remove the PowerMac hacks;

- replace the macros accessing the indexed regiters with functions, switch to
  using them where appropriate, gather the PIO/MWDMA/UDMA timings into tables;

- rewrite the speedproc() handler to set the drive's transfer mode first, and
  then override the timing registers set by hardware on UltraDMA/133 chips;

- use better criterion for determining higher UltraDMA modes, and add comment
  concerning the doubtful value of the code enabling IORDY/prefetch;

- replace the stupid 'pdcnew_new_' prefixes with mere 'pdcnew_';

- get rid of unneded spaces, parens and type casts, clean up some printk's,
  add some new lines here and there...

This work is loosely based on these former patches by Albert Lee:

[1] http://marc.theaimsgroup.com/?l=linux-ide&m=110992442032300
[2] http://marc.theaimsgroup.com/?l=linux-ide&m=110992457729382
[3] http://marc.theaimsgroup.com/?l=linux-ide&m=110992474205555
[4] http://marc.theaimsgroup.com/?l=linux-ide&m=111019224802939

Some PLL clock detection code was backported from his pata_pdc2027x driver...

This code has been successfully tested by me on PDC2026[89] chips.

I tried to keep this rework as several patches but it made no sense: [2] was
largely a modification of the non-working timing override code, [3] by itself
extended the overclocking issue to the case of non-UltraDMA/133 drives, and
finally, the cleanup patch based on [1] ended up rejected...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Albert Lee <albertcc@tw.ibm.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix noise in futex.h

There are some kernel-only bits in the middle of <linux/futex.h> which
should be removed in what we export to userspace.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: remove unused "context" param

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: remove some OPs

kernel.cap-bound uses only OP_SET and OP_AND

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IPMI: misc fixes

Fix various problems pointed out by Andrew Morton and others:
  * platform_device_unregister checks for NULL, no need to check here.
  * Formatting fixes.
  * Remove big macro and convert to a function.
  * Use strcmp instead of defining a broken case-insensitive comparison,
    and make the output parameter info match the case of the input one
    (change "I/O" to "i/o").
  * Return the length instead of 0 from the hotmod parameter handler.
  * Remove some unused cruft.
  * The trydefaults parameter only has to do with scanning the "standard"
    addresses, don't check for that on ACPI.

Signed-off-by: Corey Minyard <cminyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IPMI: remove zero inits

Remove all =0 and =NULL from static initializers.  They are not needed and
removing them saves space in the object files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] update MAINTAINERS with rtc-linux mailing list info

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] AT91RM9200 RTC

The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the
internal RTC peripheral.  This RTC driver is therefore
AT91RM9200-specific.

This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name
of the configuration option.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTCs don't use i2c_adapter.dev

Update more I2C drivers that live outside drivers/i2c to understand that using
adapter->dev is not The Way.  When actually referring to the adapter hardware,
adapter->class_dev.dev is the answer.  When referring to a device connected to
it, client->dev.dev is the answer.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rtc: Add rtc_merge_alarm()

Add rtc_merge_alarm(), which can be used by rtc drivers to turn a partially
specified alarm expiry (i.e.  most significant fields set to -1, as with the
RTC_ALM_SET ioctl()) into a fully specified expiry.

If the most significant specified field is earlier than the current time, the
least significant unspecified field is incremented.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] geode crypto is PCI device

This driver seems to be for a PCI device.

drivers/crypto/geode-aes.c:384: warning: implicit declaration of function 'pci_release_regions'
drivers/crypto/geode-aes.c:397: warning: implicit declaration of function 'pci_request_regions'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] freezer.h uses task_struct fields

freezer.h uses task_struct fields so it should include sched.h.

  CC [M]  fs/jfs/jfs_txnmgr.o
In file included from fs/jfs/jfs_txnmgr.c:49:
include/linux/freezer.h: In function 'frozen':
include/linux/freezer.h:9: error: dereferencing pointer to incomplete type
include/linux/freezer.h:9: error: 'PF_FROZEN' undeclared (first use in this function)
include/linux/freezer.h:9: error: (Each undeclared identifier is reported only once
include/linux/freezer.h:9: error: for each function it appears in.)
include/linux/freezer.h: In function 'freezing':
include/linux/freezer.h:17: error: dereferencing pointer to incomplete type
include/linux/freezer.h:17: error: 'PF_FREEZE' undeclared (first use in this function)
include/linux/freezer.h: In function 'freeze':
include/linux/freezer.h:26: error: dereferencing pointer to incomplete type
include/linux/freezer.h:26: error: 'PF_FREEZE' undeclared (first use in this function)
include/linux/freezer.h: In function 'do_not_freeze':
include/linux/freezer.h:34: error: dereferencing pointer to incomplete type
include/linux/freezer.h:34: error: 'PF_FREEZE' undeclared (first use in this function)
include/linux/freezer.h: In function 'thaw_process':
include/linux/freezer.h:43: error: dereferencing pointer to incomplete type
include/linux/freezer.h:43: error: 'PF_FROZEN' undeclared (first use in this function)
include/linux/freezer.h:44: warning: implicit declaration of function 'wake_up_process'
include/linux/freezer.h: In function 'frozen_process':
include/linux/freezer.h:55: error: dereferencing pointer to incomplete type
include/linux/freezer.h:55: error: dereferencing pointer to incomplete type
include/linux/freezer.h:55: error: 'PF_FREEZE' undeclared (first use in this function)
include/linux/freezer.h:55: error: 'PF_FROZEN' undeclared (first use in this function)
fs/jfs/jfs_txnmgr.c: In function 'freezing':
include/linux/freezer.h:18: warning: control reaches end of non-void function
make[2]: *** [fs/jfs/jfs_txnmgr.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Document how to decode an IOCTL number

Document how to decode a binary IOCTL number.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] submit checklist update

Mention the new fault-injection test framework.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] CodingStyle updates

Add some kernel coding style comments, mostly pulled from emails
by Andrew Morton, Jesper Juhl, and Randy Dunlap.

- add paragraph on switch/case indentation (with fixes)
- add paragraph on multiple-assignments
- add more on Braces
- add section on Spaces; add typeof, alignof, & __attribute__ with sizeof;
  add more on postfix/prefix increment/decrement operators
- add paragraph on function breaks in source files; add info on
  function prototype parameter names
- add paragraph on EXPORT_SYMBOL placement
- add section on /*-comment style, long-comment style, and data
  declarations and comments
- correct some chapter number references that were missed when
  chapters were renumbered

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] spi: stabilize PIO mode transfers on PXA2xx systems

Stabilize PIO mode transfers against a range of word sizes and FIFO
thresholds and fixes word size setup/override issues.

1) 16 and 32 bit DMA/PIO transfers broken due to timing differences.
2) Potential for bad transfer counts due to transfer size assumptions.
3) Setup function broken is multiple ways.
4) Per transfer bit_per_word changes break DMA setup in pump_tranfers.
5) False positive timeout are not errors.
6) Changes in pxa2xx_spi_chip not effective in calls to setup.
7) Timeout scaling wrong for PXA255 NSSP.
8) Driver leaks memory while busy during unloading.

Known issues:

SPI_CS_HIGH and SPI_LSB_FIRST settings in struct spi_device are not handled.

Testing:

This patch has been test against the "random length, random bits/word,
random data (verified on loopback) and stepped baud rate by octaves
(3.6MHz to 115kHz)" test.  It is robust in PIO mode, using any
combination of tx and rx thresholds, and also in DMA mode (which
internally computes the thresholds).

Much thanks to Ned Forrester for exhaustive reviews, fixes and testing.
The driver is substantially better for his efforts.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: complete switch to pci_get

The reverse get function allows the final piece of the switching for the old
IDE layer

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] xtensa: fix system call interface

This is a long outstanding patch to finally fix the syscall interface.  The
constants used for the system calls are those we have provided in our libc
patches.  This patch also fixes the shmbuf and stat structure, and fcntl
definitions.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] xtensa: remove extra header files

The Xtensa port contained many header files that were never needed.  This
rather lengthy patch removes all those files.  Unfortunately, there were
many dependencies that needed to be updated, so this patch touches quite a
few source files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] xtensa: fix irq and misc fixes

Update the architecture specific interrupt handling code for Xtensa to support
the new API.  Use generic BUG macros in bug.h, and some minor fixes.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] read_zero_pagealigned() locking fix

Ramiro Voicu hits the BUG_ON(!pte_none(*pte)) in zeromap_pte_range: kernel
bugzilla 7645.  Right: read_zero_pagealigned uses down_read of mmap_sem,
but another thread's racing read of /dev/zero, or a normal fault, can
easily set that pte again, in between zap_page_range and zeromap_page_range
getting there.  It's been wrong ever since 2.4.3.

The simple fix is to use down_write instead, but that would serialize reads
of /dev/zero more than at present: perhaps some app would be badly
affected.  So instead let zeromap_page_range return the error instead of
BUG_ON, and read_zero_pagealigned break to the slower clear_user loop in
that case - there's no need to optimize for it.

Use -EEXIST for when a pte is found: BUG_ON in mmap_zero (the other user of
zeromap_page_range), though it really isn't interesting there.  And since
mmap_zero wants -EAGAIN for out-of-memory, the zeromaps better return that
than -ENOMEM.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Ramiro Voicu: <Ramiro.Voicu@cern.ch>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kbuild: don't put temp files in source

The as-instr/ld-option need to create temporary files, but create them in the
output directory, when compiling external modules.  Reformat them a bit and
use $(CC) instead of $(AS) as the former is used by kbuild to assemble files.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <jpdenheijer@gmail.com>
Cc: Horst Schirmeier <horst@schirmeier.com>
Cc: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kbuild: fix-rR-is-now-default

`make -d help | grep Makefile` shows patterns, where make tries to rebuild
included and top makefiles.

While `make -rR is now default' commit should fix this, actually, it was just
a little janitorial.

This fix is aimed to complete cancelling implicit rules.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Kconfig refactoring for better menu nesting

Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.

Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ipc-procfs-sysctl mixups

When CONFIG_PROC_FS=n and CONFIG_PROC_SYSCTL=n but CONFIG_SYSVIPC=y, we get
this build error:

kernel/built-in.o:(.data+0xc38): undefined reference to `proc_ipc_doulongvec_minmax'
kernel/built-in.o:(.data+0xc88): undefined reference to `proc_ipc_doulongvec_minmax'
kernel/built-in.o:(.data+0xcd8): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xd28): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xd78): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xdc8): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xe18): undefined reference to `proc_ipc_dointvec'
make: *** [vmlinux] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ucb1400_ts depends SND_AC97_BUS

This driver is an AC97 codec according to its help text.  However, if SOUND is
disabled, the "select SND_AC97_BUS" still inserts that into the .config file:

#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SND_AC97_BUS=m

Even if the config software followed dependency chains on selects, we should
try to limit usage of "select" to library-type code that is needed (e.g., CRC
functions) instead of bus-type support.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] workstruct: fix ieee80211-softmac compile problem

Fix ieee80211-softmac compile problem where it's using schedule_work() on a
delayed_work struct.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS
  [PATCH] i386: Fix io_apic.c warning
  [PATCH] i386: export smp_num_siblings for oprofile
  [PATCH] x86: Work around gcc 4.2 over aggressive optimizer
  [PATCH] x86: Fix boot hang due to nmi watchdog init code
  [PATCH] x86: Fix verify_quirk_intel_irqbalance()
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

[PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS

Since Voyager and Visual WS already define ARCH_SETUP,
it looks like PARAVIRT shouldn't be offered for them.

In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition
In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

[PATCH] i386: Fix io_apic.c warning

gcc 4.2 warns

linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’:
linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function

The warning is false, but somewhat legitimate so work around it.

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] i386: export smp_num_siblings for oprofile

oprofile uses smp_num_siblings without testing for CONFIG_X86_HT.
I looked at modifying oprofile, but this way is cleaner & simpler
and I didn't see a good reason not to just export it when CONFIG_SMP.

WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86: Work around gcc 4.2 over aggressive optimizer

The new PDA code uses a dummy _proxy_pda variable to describe
memory references to the PDA. It is never referenced
in inline assembly, but exists as input/output arguments.
gcc 4.2 in some cases can CSE references to this which causes
unresolved symbols.  Define it to zero to avoid this.

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86: Fix boot hang due to nmi watchdog init code

2.6.19  stopped booting (or booted based on build/config) on our x86_64
systems due to a bug introduced in 2.6.19.  check_nmi_watchdog schedules an
IPI on all cpus to  busy wait on a flag, but fails to set the busywait
flag if NMI functionality is disabled.  This causes the secondary cpus
to spin in an endless loop, causing the kernel bootup to hang.
Depending upon the build, the  busywait flag got overwritten (stack variable)
and caused  the kernel to bootup on certain builds.  Following patch fixes
the bug by setting the busywait flag before returning from check_nmi_watchdog.
I guess using a stack variable is not good here as the calling function could
potentially return while the busy wait loop is still spinning on the flag.

AK: I redid the patch significantly to be cleaner

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86: Fix verify_quirk_intel_irqbalance()

Fix verify_quirk_intel_irqbalance(). genapic checks should really
happen only on affected versions of the E7520/E7320/E7525 based platforms.

AK: This should akpm's Coyote SDV

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] i386: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86-64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>

Merge branch 'drm-patches' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606
  drm: add flag for mapping PCI DMA buffers read-only.
  drm: fix up irqflags in drm_lock.c
  drm: i915 updates
  drm: i915: fix up irqflags arg
  drm: i915: Only return EBUSY after we've established we need to schedule a new swap.
  drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap().
  drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to.
  drm: Make handling of dev_priv->vblank_pipe more robust.
  drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead
  drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks.
  drm: Core vsync: Don't clobber target sequence number when scheduling signal.
  drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS.
  drm: Make locked tasklet handling more robust.
  drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended.
  drm: Change first valid DRM drawable ID to be 1 instead of 0.
  drm: drawable locking + memory management fixes + copyright
  drm: Add support for interrupt triggered driver callback with lock held to DRM core.
  drm: Add support for tracking drawable information to core
  drm: add support for secondary vertical blank interrupt to i915
  ...

[PATCH] WorkStruct: Use direct assignment rather than cmpxchg()

Use direct assignment rather than cmpxchg() as the latter is unavailable
and unimplementable on some platforms and is actually unnecessary.

The use of cmpxchg() was to guard against two possibilities, neither of
which can actually occur:

 (1) The pending flag may have been unset or may be cleared.  However, given
     where it's called, the pending flag is _always_ set.  I don't think it
     can be unset whilst we're in set_wq_data().

     Once the work is enqueued to be actually run, the only way off the queue
     is for it to be actually run.

     If it's a delayed work item, then the bit can't be cleared by the timer
     because we haven't started the timer yet.  Also, the pending bit can't be
     cleared by cancelling the delayed work _until_ the work item has had its
     timer started.

 (2) The workqueue pointer might change.  This can only happen in two cases:

     (a) The work item has just been queued to actually run, and so we're
         protected by the appropriate workqueue spinlock.

     (b) A delayed work item is being queued, and so the timer hasn't been
       started yet, and so no one else knows about the work item or can
       access it (the pending bit protects us).

     Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so
     it can be assigned instead.

So, replacing the set_wq_data() with a straight assignment would be okay
in most cases.

The problem is where we end up tangling with test_and_set_bit() emulated
using spinlocks, and even then it's not a problem _provided_
test_and_set_bit() doesn't attempt to modify the word if the bit was
set.

If that's a problem, then a bitops-proofed assignment will be required -
equivalent to atomic_set() vs other atomic_xxx() ops.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Amiga PCMCIA NE2000 Ethernet dev->irq init

Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq

Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68k: EXPORT_SYMBOL(cache_{clear,push}) bogus comment

Remove bogus comments about unexporting cache_{push,clear}(), as inline
dma_cache_maintenance() (used by at least bionet and pamsnet) calls them.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68k/Atari: 2.6.18 Atari IDE interrupt needs SA_SHIRQ

Atari IDE: The interrupt needs SA_SHIRQ now to get registered.

Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Sun3 SCSI: Make sun3 scsi drivers compile/work again

Make sun3 scsi drivers compile/work again (though with way too many warnings...)

Tested on 3/50, 3/60.

Signed-off-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Sun3: General updates

General compile fixes for 2.6.16 for sun3, and some updates to make the new
bootloader work correctly.  Tested on 3/50, 3/60, 3/80.

Signed-off-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68k/HP300: HP LANCE updates

- 7990: request_irq() should have SA_SHIRQ flag set
- hplance_init() printed dev->name before register_netdev() had filled it in

Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace.
  [NET_SCHED] sch_htb: turn intermediate classes into leaves
  [NET_SCHED] sch_cbq: deactivating when grafting, purging etc.
  [XFRM]: Fix XFRMGRP_REPORT to use correct multicast group.
  [NET]: Force a cache line split in hh_cache in SMP.
  [NETPOLL]: make arp replies through netpoll use mac address of sender
  [NETLINK]: Restore API compatibility of address and neighbour bits
  [AX.25]: Fix default address and broadcast address initialization.
  [AX.25]: Constify ax25 utility functions
  [BNX2]: Add an error check.
  [NET]: Convert hh_lock to seqlock.

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [PATCH] add STB810 support (Philips PNX8550-based)
  [MIPS] Qemu now has an ELF loader.
  [MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users
  [MIPS] Optimize csum_partial for 64bit kernel
  [MIPS] Optimize flow of csum_partial
  [MIPS] Make csum_partial more readable
  [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines

[NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace.

GLIBC uses them etc.

They are guarded by ifndef __KERNEL__ so nobody will start
accidently using them in the kernel again, it's just for
userspace.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED] sch_htb: turn intermediate classes into leaves

- turn intermediate classes into leaves again when their
  last child is deleted (struct htb_class changed)

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED] sch_cbq: deactivating when grafting, purging etc.

- deactivating of active classes when q.qlen drops to zero
  (cbq_drop)

- a redundant instruction removed from cbq_deactivate_class

PS: probably htb_deactivate in htb_delete and
cbq_deactivate_class in cbq_delete are also
redundant now.

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Fix XFRMGRP_REPORT to use correct multicast group.

XFRMGRP_REPORT uses 0x10 which is a group that belongs
to events. The correct value is 0x20.
We should really be using xfrm_nlgroups going forward; it was tempting
to delete the definition of XFRMGRP_REPORT but it would break at
least iproute2.

Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Force a cache line split in hh_cache in SMP.

hh_lock was converted from rwlock to seqlock by Stephen.

To have a 100% benefit of this change, I suggest to place read mostly fields
of hh_cache in a separate cache line, because hh_refcnt may be changed quite
frequently on some busy machines.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETPOLL]: make arp replies through netpoll use mac address of sender

Back in 2.4 arp requests that were recevied by netpoll were processed
in netconsole_receive_skb, where they were responded to using the src
mac of the request sender.  In the 2.6 kernel arp_reply is responsible
for this function, but instead of using the src mac address of the
incomming request, the stored mac address that was registered for the
netconsole application is used.  While this is usually ok, it can lead
to failures in netpoll in some situations (specifically situations
where a network may have two gateways, as arp requests from one may be
responded to using the mac address of the other).  This patch reverts
the behavior to what we had in 2.4, in which all arp requests are sent
back using the src address of the request sender.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETLINK]: Restore API compatibility of address and neighbour bits

Restore API compatibility due to bits moved from rtnetlink.h to
separate headers.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AX.25]: Fix default address and broadcast address initialization.

Only the callsign but not the SSID part of an AX.25 address is ASCII
based but Linux by initializes the SSID which should be just a 4-bit
number from ASCII anyway.

Fix that and convert the code to use a shared constant for both default
addresses.  While at it, use the same style for null_ax25_address also.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AX.25]: Constify ax25 utility functions

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: Add an error check.

This patch adds a missing error check spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Convert hh_lock to seqlock.

The hard header cache is in the main output path, so using
seqlock instead of reader/writer lock should reduce overhead.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] add STB810 support (Philips PNX8550-based)

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Qemu now has an ELF loader.

So nuke kludge for flat binaries.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users

Now that i8259A_chip uses new irq flow handler select
GENERIC_HARDIRQS_NO__DO_IRQ on some more platforms.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Optimize csum_partial for 64bit kernel

Make csum_partial 64-bit powered.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Optimize flow of csum_partial

Delete dead codes at end of the function and move small_csumcopy
there.  This makes some labels (maybe_end_cruft, small_memcpy,
end_bytes, out) needless and eliminates some branches.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Make csum_partial more readable

Use standard o32 register name instead of T0, T1, etc, like memcpy.S.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix NTLMv2 mounts to Windows servers

Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Poison init section before freeing it.
  [S390] Use add_active_range() and free_area_init_nodes().
  [S390] Virtual memmap for s390.
  [S390] Update documentation for dynamic subchannel mapping.
  [S390] Use dev->groups for adding/removing the subchannel attribute group.
  [S390] Support for disconnected devices reappearing on another subchannel.
  [S390] subchannel lock conversion.
  [S390] Some preparations for the dynamic subchannel mapping patch.
  [S390] runtime switch for qdio performance statistics
  [S390] New DASD feature for ERP related logging
  [S390] add reset call handler to the ap bus.
  [S390] more workqueue fixes.
  [S390] workqueue fixes.
  [S390] uaccess_pt: add missing down_read() and convert to is_init().

[PATCH] Generic HID layer - build

This modifies Makefiles and Kconfigs to properly reflect the creation of
generic HID layer.

It also removes the dependency of BROKEN, which was introduced by the
first patch in series (see the comment). Also updates credits.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - pb_fnmode

pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons
and also because it logically belongs there.

Also removes empty hid-input.c file in drivers/usb/input.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - input and event reporting

hid_input_report() was needlessly USB-specific in USB HID. This patch
makes the function independent of HID implementation and fixes all
the current users. Bluetooth patches comply with this prototype.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - hiddev

- hiddev is USB-only (agreed with Marcel Holtmann that Bluetooth currently
  doesn't need it, and future planned interface (rawhid) will be more flexible
  and usable)
- both HID and USB-hid can be now compiled as modules (wasn't possible before
  hiddev was fully separated from generic HID layer)

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - USB API

- 'dev' in struct hid_device changed from struct usb_device to
  struct device and fixed all the users
- renamed functions which are part of USB HID API from 'hid_*' to
  'usbhid_*'
- force feedback initialization moved from common part into USB-specific
  driver
- added usbhid.h header for USB HID API users
- removed USB-specific fields from struct hid_device and moved them
  to new usbhid_device, which is pointed to by hid_device->driver_data
- fixed all USB users to use this new structure

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - API

- fixed generic API (added neccessary EXPORT_SYMBOL, fixed hid.h to provide correct
  prototypes)
- extended hid_device with open/close/event function pointers to driver-specific
  functions
- added driver specific driver_data to hid_device

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - code split

The "big main" split of USB HID code into generic HID code and
USB-transport specific HID handling.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Generic HID layer - disable USB HID

This patch is a part of generic HID layer introduction. USB HID is
disabled, so that the code split and changes could be introduced in a
way that is reviewable (i.e. separate patches), but not to break git
bisect by uncompilable kernel throughout different stages of the code
splitup and changes. The last patch of this series enables HID again.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: fix au1xmmc build error
  mmc: pxamci compilation fix

[PATCH] proc_misc build fix

fs/proc/proc_misc.c: In function `version_read_proc':
fs/proc/proc_misc.c:256: warning: implicit declaration of function `utsname'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] CPU hotplug broken with 2GB VMSPLIT

In VMSPLIT mode, kernel PGD might have more entries than user space.

Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>