migrate: add hugepage migration code to migrate_pages()

Extend check_range() to handle vma with VM_HUGETLB set.  We will be able
to migrate hugepage with migrate_pages(2) after applying the enablement
patch which comes later in this series.

Note that for larger hugepages (covered by pud entries, 1GB for x86_64 for
example), we simply skip it now.

Note that using pmd_huge/pud_huge assumes that hugepages are pointed to by
pmd/pud.  This is not true in some architectures implementing hugepage
with other mechanisms like ia64, but it's OK because pmd_huge/pud_huge
simply return 0 in such arch and page walker simply ignores such
hugepages.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: soft-offline: use migrate_pages() instead of migrate_huge_page()

Currently migrate_huge_page() takes a pointer to a hugepage to be migrated
as an argument, instead of taking a pointer to the list of hugepages to be
migrated.  This behavior was introduced in commit 189ebff28 ("hugetlb:
simplify migrate_huge_page()"), and was OK because until now hugepage
migration is enabled only for soft-offlining which migrates only one
hugepage in a single call.

But the situation will change in the later patches in this series which
enable other users of page migration to support hugepage migration.  They
can kick migration for both of normal pages and hugepages in a single
call, so we need to go back to original implementation which uses linked
lists to collect the hugepages to be migrated.

With this patch, soft_offline_huge_page() switches to use migrate_pages(),
and migrate_huge_page() is not used any more.  So let's remove it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migrate: make core migration code aware of hugepage

Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.

The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.

This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)

Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)

As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7).  Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior.  Patch 8 is
about making sure that we only migrate pmd-based hugepages.  And patch 9
is about choosing appropriate zone for hugepage allocation.

My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly.  Test code
is available here:

  git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git

And I always run libhugetlbfs test when changing hugetlbfs's code.  With
this patchset, no regression was found in the test.

This patch (of 9):

Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: return a reserved page to a reserved pool if failed

If we fail with a reserved page, just calling put_page() is not
sufficient, because put_page() invoke free_huge_page() at last step and it
doesn't know whether a page comes from a reserved pool or not.  So it
doesn't do anything related to reserved count.  This makes reserve count
lower than how we need, because reserve count already decrease in
dequeue_huge_page_vma().  This patch fix this situation.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: grab a page_table_lock after page_cache_release

We don't need to grab a page_table_lock when we try to release a page.
So, defer to grab a page_table_lock.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: remove useless check about mapping type

is_vma_resv_set(vma, HPAGE_RESV_OWNER) implys that this mapping is for
private.  So we don't need to check whether this mapping is for shared or
not.

This patch is just for clean-up.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: fix subpool accounting handling

If we alloc hugepage with avoid_reserve, we don't dequeue reserved one.
So, we should check subpool counter when avoid_reserve.  This patch
implement it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: change variable name reservations to resv

'reservations' is so long name as a variable and we use 'resv_map' to
represent 'struct resv_map' in other place.  To reduce confusion and
unreadability, change it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: protect reserved pages when soft offlining a hugepage

Don't use the reserve pool when soft offlining a hugepage.  Check we have
free pages outside the reserve pool before we dequeue the huge page.
Otherwise, we can steal other's reserve page.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hotplug: remove stop_machine() from try_offline_node()

lock_device_hotplug() serializes hotplug & online/offline operations.  The
lock is held in common sysfs online/offline interfaces and ACPI hotplug
code paths.

And here are the code paths:

- CPU & Mem online/offline via sysfs online
store_online()->lock_device_hotplug()

- Mem online via sysfs state:
store_mem_state()->lock_device_hotplug()

- ACPI CPU & Mem hot-add:
acpi_scan_bus_device_check()->lock_device_hotplug()

- ACPI CPU & Mem hot-delete:
acpi_scan_hot_remove()->lock_device_hotplug()

try_offline_node() off-lines a node if all memory sections and cpus are
removed on the node.  It is called from acpi_processor_remove() and
acpi_memory_remove_memory()->remove_memory() paths, both of which are in
the ACPI hotplug code.

try_offline_node() calls stop_machine() to stop all cpus while checking
all cpu status with the assumption that the caller is not protected from
CPU hotplug or CPU online/offline operations.  However, the caller is
always serialized with lock_device_hotplug().  Also, the code needs to be
properly serialized with a lock, not by stopping all cpus at a random
place with stop_machine().

This patch removes the use of stop_machine() in try_offline_node() and
adds comments to try_offline_node() and remove_memory() that
lock_device_hotplug() is required.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hotplug: verify hotplug memory range

add_memory() and remove_memory() can only handle a memory range aligned
with section.  There are problems when an unaligned range is added and
then deleted as follows:

 - add_memory() with an unaligned range succeeds, but __add_pages()
   called from add_memory() adds a whole section of pages even though
   a given memory range is less than the section size.
 - remove_memory() to the added unaligned range hits BUG_ON() in
   __remove_pages().

This patch changes add_memory() and remove_memory() to check if a given
memory range is aligned with section at the beginning.  As the result,
add_memory() fails with -EINVAL when a given range is unaligned, and does
not add such memory range.  This prevents remove_memory() to be called
with an unaligned range as well.  Note that remove_memory() has to use
BUG_ON() since this function cannot fail.

[akpm@linux-foundation.org: avoid printk warnings]
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugepage: mention libhugetlbfs in doc

Explicitly mention/recommend using the libhugetlbfs test cases when
changing related kernel code.  Developers that are unaware of the project
can easily miss this and introduce potential regressions that may or may
not be caught by community review.

Also do some cleanups that make the document visually easier to view at a
first glance.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: make context readahead more conservative

This helps performance on moderately dense random reads on SSD.

Transaction-Per-Second numbers provided by Taobao:

QPS case
-------------------------------------------------------
7536 disable context readahead totally
w/ patch: 7129 slower size rampup and start RA on the 3rd read
6717 slower size rampup
w/o patch: 5581 unmodified context readahead

Before, readahead will be started whenever reading page N+1 when it happen
to read N recently.  After patch, we'll only start readahead when *three*
random reads happen to access pages N, N+1, N+2.  The probability of this
happening is extremely low for pure random reads, unless they are very
dense, which actually deserves some readahead.

Also start with a smaller readahead window.  The impact to interleaved
sequential reads should be small, because for a long run stream, the the
small readahead window rampup phase is negletable.

The context readahead actually benefits clustered random reads on HDD
whose seek cost is pretty high.  However as SSD is increasingly used for
random read workloads it's better for the context readahead to concentrate
on interleaved sequential reads.

Another SSD rand read test from Miao

        # file size:        2GB
        # read IO amount: 625MB
        sysbench --test=fileio          \
                --max-requests=10000    \
                --num-threads=1         \
                --file-num=1            \
                --file-block-size=64K   \
                --file-test-mode=rndrd  \
                --file-fsync-freq=0     \
                --file-fsync-end=off    run

shows the performance of btrfs grows up from 69MB/s to 121MB/s, ext4 from
104MB/s to 121MB/s.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tao Ma <tm@tao.ma>
Tested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use zone_is_initialized() instead of if(zone->wait_table)

Use "zone_is_initialized()" instead of "if (zone->wait_table)".
Simplify the code, no functional change.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use zone_is_empty() instead of if(zone->spanned_pages)

Use "zone_is_empty()" instead of "if (zone->spanned_pages)".
Simplify the code, no functional change.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use zone_end_pfn() instead of zone_start_pfn+spanned_pages

Use "zone_end_pfn()" instead of "zone->zone_start_pfn + zone->spanned_pages".
Simplify the code, no functional change.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/genalloc.c: fix overflow of ending address of memory chunk

In struct gen_pool_chunk, end_addr means the end address of memory chunk
(inclusive), but in the implementation it is treated as address + size of
memory chunk (exclusive), so it points to the address plus one instead of
correct ending address.

The ending address of memory chunk plus one will cause overflow on the
memory chunk including the last address of memory map, e.g.  when starting
address is 0xFFF00000 and size is 0x100000 on 32bit machine, ending
address will be 0x100000000.

Use correct ending address like starting address + size - 1.

[akpm@linux-foundation.org: add comment to struct gen_pool_chunk:end_addr]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zbud: fix some trivial typos in comments

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hotplug: remove unnecessary BUG_ON in __offline_pages()

I think we can remove "BUG_ON(start_pfn >= end_pfn)" in __offline_pages(),
because in memory_block_action() "nr_pages = PAGES_PER_SECTION * sections_per_block"
is always greater than 0.

memory_block_action()
offline_pages()
__offline_pages()
BUG_ON(start_pfn >= end_pfn)

In v2.6.32, If info->length==0, this way may hit this BUG_ON().
acpi_memory_disable_device()
remove_memory(info->start_addr, info->length)
offline_pages()

A later Fujitsu patch renamed this function and the BUG_ON() is
unnecessary.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmalloc: use well-defined find_last_bit() func

Our intention in here is to find last_bit within the region to flush.
There is well-defined function, find_last_bit() for this purpose and its
performance may be slightly better than current implementation.  So change
it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmalloc: remove useless variable in vmap_block

vbq in vmap_block isn't used. So remove it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmstat: use this_cpu() to avoid irqon/off sequence in refresh_cpu_vm_stats

Disabling interrupts repeatedly can be avoided in the inner loop if we use
a this_cpu operation.

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmstat: create fold_diff

Both functions that update global counters use the same mechanism.

Create a function that contains the common code.

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmstat: create separate function to fold per cpu diffs into local counters

The main idea behind this patchset is to reduce the vmstat update overhead
by avoiding interrupt enable/disable and the use of per cpu atomics.

This patch (of 3):

It is better to have a separate folding function because
refresh_cpu_vm_stats() also does other things like expire pages in the
page allocator caches.

If we have a separate function then refresh_cpu_vm_stats() is only called
from the local cpu which allows additional optimizations.

The folding function is only called when a cpu is being downed and
therefore no other processor will be accessing the counters.  Also
simplifies synchronization.

[akpm@linux-foundation.org: fix UP build]
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: clean-up #ifdef in page_mapping()

PageSwapCache() is always false when !CONFIG_SWAP, so compiler
properly discard related code. Therefore, we don't need #ifdef explicitly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move pgtable related functions to right place

pgtable related functions are mostly in pgtable-generic.c.
So move remaining functions from memory.c to pgtable-generic.c.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: add unlikely macro to help compiler optimization

We rarely allocate a page with ALLOC_NO_WATERMARKS and it is used in slow
path.  For helping compiler optimization, add unlikely macro to
ALLOC_NO_WATERMARKS checking.

This patch doesn't have any effect now, because gcc already optimize this
properly.  But we cannot assume that gcc always does right and nobody
re-evaluate if gcc do proper optimization with their change, for example,
it is not optimized properly on v3.10.  So adding compiler hint here is
reasonable.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempolicy: return NULL if node is NUMA_NO_NODE in get_task_policy

If node == NUMA_NO_NODE, pol is NULL, we should return NULL instead of
do "if (!pol->mode)" check.

[akpm@linux-foundation.org: reorganise code]
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: decrement reserve count if VM_NORESERVE alloc page cache

If a vma with VM_NORESERVE allocate a new page for page cache, we should
check whether this area is reserved or not.  If this address is already
reserved by other process(in case of chg == 0), we should decrement
reserve count, because this allocated page will go into page cache and
currently, there is no way to know that this page comes from reserved pool
or not when releasing inode.  This may introduce over-counting problem to
reserved count.  With following example code, you can easily reproduce
this situation.

Assume 2MB, nr_hugepages = 100

        size = 20 * MB;
        flag = MAP_SHARED;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
                return -1;
        }

        flag = MAP_SHARED | MAP_NORESERVE;
        q = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (q == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
        }
        q[0] = 'c';

After finish the program, run 'cat /proc/meminfo'.  You can see below
result.

HugePages_Free:      100
HugePages_Rsvd:        1

To fix this, we should check our mapping type and tracked region.  If our
mapping is VM_NORESERVE, VM_MAYSHARE and chg is 0, this imply that current
allocated page will go into page cache which is already reserved region
when mapping is created.  In this case, we should decrease reserve count.
As implementing above, this patch solve the problem.

[akpm@linux-foundation.org: fix spelling in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: remove decrement_hugepage_resv_vma()

Now, Checking condition of decrement_hugepage_resv_vma() and
vma_has_reserves() is same, so we can clean-up this function with
vma_has_reserves().  Additionally, decrement_hugepage_resv_vma() has only
one call site, so we can remove function and embed it into
dequeue_huge_page_vma() directly.  This patch implement it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: add VM_NORESERVE check in vma_has_reserves()

If we map the region with MAP_NORESERVE and MAP_SHARED, we can skip to
check reserve counting and eventually we cannot be ensured to allocate a
huge page in fault time.  With following example code, you can easily find
this situation.

Assume 2MB, nr_hugepages = 100

        fd = hugetlbfs_unlinked_fd();
        if (fd < 0)
                return 1;

        size = 200 * MB;
        flag = MAP_SHARED;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
                return -1;
        }

        size = 2 * MB;
        flag = MAP_ANONYMOUS | MAP_SHARED | MAP_HUGETLB | MAP_NORESERVE;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, -1, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
        }
        p[0] = '0';
        sleep(10);

During executing sleep(10), run 'cat /proc/meminfo' on another process.

HugePages_Free:       99
HugePages_Rsvd:      100

Number of free should be higher or equal than number of reserve, but this
aren't.  This represent that non reserved shared mapping steal a reserved
page.  Non reserved shared mapping should not eat into reserve space.

If we consider VM_NORESERVE in vma_has_reserve() and return 0 which mean
that we don't have reserved pages, then we check that we have enough free
pages in dequeue_huge_page_vma().  This prevent to steal a reserved page.

With this change, above test generate a SIGBUG which is correct, because
all free pages are reserved and non reserved shared mapping can't get a
free page.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: do not use a page in page cache for cow optimization

Currently, we use a page with mapped count 1 in page cache for cow
optimization.  If we find this condition, we don't allocate a new page and
copy contents.  Instead, we map this page directly.  This may introduce a
problem that writting to private mapping overwrite hugetlb file directly.
You can find this situation with following code.

        size = 20 * MB;
        flag = MAP_SHARED;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
                return -1;
        }
        p[0] = 's';
        fprintf(stdout, "BEFORE STEAL PRIVATE WRITE: %c\n", p[0]);
        munmap(p, size);

        flag = MAP_PRIVATE;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
        }
        p[0] = 'c';
        munmap(p, size);

        flag = MAP_SHARED;
        p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
        if (p == MAP_FAILED) {
                fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
                return -1;
        }
        fprintf(stdout, "AFTER STEAL PRIVATE WRITE: %c\n", p[0]);
        munmap(p, size);

We can see that "AFTER STEAL PRIVATE WRITE: c", not "AFTER STEAL PRIVATE
WRITE: s".  If we turn off this optimization to a page in page cache, the
problem is disappeared.

So, I change the trigger condition of optimization.  If this page is not
AnonPage, we don't do optimization.  This makes this optimization turning
off for a page cache.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: remove redundant list_empty check in gather_surplus_pages()

If list is empty, list_for_each_entry_safe() doesn't do anything.  So,
this check is redundant.  Remove it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: fix and clean-up node iteration code to alloc or free

Current node iteration code have a minor problem which do one more node
rotation if we can't succeed to allocate.  For example, if we start to
allocate at node 0, we stop to iterate at node 0.  Then we start to
allocate at node 1 for next allocation.

I introduce new macros "for_each_node_mask_to_[alloc|free]" and fix and
clean-up node iteration code to alloc or free.  This makes code more
understandable.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: clean-up alloc_huge_page()

Unify successful allocation paths to make the code more readable.  There
are no functional changes.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: trivial commenting fix

The name of the mutex written in comment is wrong.  Fix it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: move up the code which check availability of free huge page

In this time we are holding a hugetlb_lock, so hstate values can't be
changed.  If we don't have any usable free huge page in this time, we
don't need to proceed with the processing.  So move this code up.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: revert "page-writeback.c: subtract min_free_kbytes from dirtyable memory"

This reverts commit 75f7ad8e043d.  It was the result of a problem
observed with a 3.2 kernel and merged in 3.9, while the issue had been
resolved upstream in 3.3 (commit ab8fabd46f81: "mm: exclude reserved
pages from dirtyable memory").

The "reserved pages" are a superset of min_free_kbytes, thus this change
is redundant and confusing.  Revert it.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Paul Szabo <psz@maths.usyd.edu.au>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_alloc: fair zone allocator policy

Each zone that holds userspace pages of one workload must be aged at a
speed proportional to the zone size.  Otherwise, the time an individual
page gets to stay in memory depends on the zone it happened to be
allocated in.  Asymmetry in the zone aging creates rather unpredictable
aging behavior and results in the wrong pages being reclaimed, activated
etc.

But exactly this happens right now because of the way the page allocator
and kswapd interact.  The page allocator uses per-node lists of all zones
in the system, ordered by preference, when allocating a new page.  When
the first iteration does not yield any results, kswapd is woken up and the
allocator retries.  Due to the way kswapd reclaims zones below the high
watermark while a zone can be allocated from when it is above the low
watermark, the allocator may keep kswapd running while kswapd reclaim
ensures that the page allocator can keep allocating from the first zone in
the zonelist for extended periods of time.  Meanwhile the other zones
rarely see new allocations and thus get aged much slower in comparison.

The result is that the occasional page placed in lower zones gets
relatively more time in memory, even gets promoted to the active list
after its peers have long been evicted.  Meanwhile, the bulk of the
working set may be thrashing on the preferred zone even though there may
be significant amounts of memory available in the lower zones.

Even the most basic test -- repeatedly reading a file slightly bigger than
memory -- shows how broken the zone aging is.  In this scenario, no single
page should be able stay in memory long enough to get referenced twice and
activated, but activation happens in spades:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 0
      nr_active_file 8
      nr_inactive_file 1582
      nr_active_file 11994
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 70
      nr_inactive_file 258753
      nr_active_file 443214
      nr_inactive_file 149793
      nr_active_file 12021

Fix this with a very simple round robin allocator.  Each zone is allowed a
batch of allocations that is proportional to the zone's size, after which
it is treated as full.  The batch counters are reset when all zones have
been tried and the allocator enters the slowpath and kicks off kswapd
reclaim.  Allocation and reclaim is now fairly spread out to all
available/allowable zones:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 174
      nr_active_file 4865
      nr_inactive_file 53
      nr_active_file 860
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 666622
      nr_active_file 4988
      nr_inactive_file 190969
      nr_active_file 937

When zone_reclaim_mode is enabled, allocations will now spread out to all
zones on the local node, not just the first preferred zone (which on a 4G
node might be a tiny Normal zone).

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_alloc: rearrange watermark checking in get_page_from_freelist

Allocations that do not have to respect the watermarks are rare
high-priority events.  Reorder the code such that per-zone dirty limits
and future checks important only to regular page allocations are ignored
in these extraordinary situations.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: fix numa reclaim balance problem in kswapd

The way the page allocator interacts with kswapd creates aging imbalances,
where the amount of time a userspace page gets in memory under reclaim
pressure is dependent on which zone, which node the allocator took the
page frame from.

#1 fixes missed kswapd wakeups on NUMA systems, which lead to some
   nodes falling behind for a full reclaim cycle relative to the other
   nodes in the system

#3 fixes an interaction where kswapd and a continuous stream of page
   allocations keep the preferred zone of a task between the high and
   low watermark (allocations succeed + kswapd does not go to sleep)
   indefinitely, completely underutilizing the lower zones and
   thrashing on the preferred zone

These patches are the aging fairness part of the thrash-detection based
file LRU balancing.  Andrea recommended to submit them separately as they
are bugfixes in their own right.

The following test ran a foreground workload (memcachetest) with
background IO of various sizes on a 4 node 8G system (similar results were
observed with single-node 4G systems):

parallelio
                                               BAS                    FAIRALLO
                                              BASE                   FAIRALLOC
Ops memcachetest-0M              5170.00 (  0.00%)           5283.00 (  2.19%)
Ops memcachetest-791M            4740.00 (  0.00%)           5293.00 ( 11.67%)
Ops memcachetest-2639M           2551.00 (  0.00%)           4950.00 ( 94.04%)
Ops memcachetest-4487M           2606.00 (  0.00%)           3922.00 ( 50.50%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-791M               55.00 (  0.00%)             18.00 ( 67.27%)
Ops io-duration-2639M             235.00 (  0.00%)            103.00 ( 56.17%)
Ops io-duration-4487M             278.00 (  0.00%)            173.00 ( 37.77%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-791M             245184.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-2639M            468069.00 (  0.00%)         108778.00 ( 76.76%)
Ops swaptotal-4487M            452529.00 (  0.00%)          76623.00 ( 83.07%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-791M                108297.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-2639M               169537.00 (  0.00%)          50031.00 ( 70.49%)
Ops swapin-4487M               167435.00 (  0.00%)          34178.00 ( 79.59%)
Ops minorfaults-0M            1518666.00 (  0.00%)        1503993.00 (  0.97%)
Ops minorfaults-791M          1676963.00 (  0.00%)        1520115.00 (  9.35%)
Ops minorfaults-2639M         1606035.00 (  0.00%)        1799717.00 (-12.06%)
Ops minorfaults-4487M         1612118.00 (  0.00%)        1583825.00 (  1.76%)
Ops majorfaults-0M                  6.00 (  0.00%)              0.00 (  0.00%)
Ops majorfaults-791M            13836.00 (  0.00%)             10.00 ( 99.93%)
Ops majorfaults-2639M           22307.00 (  0.00%)           6490.00 ( 70.91%)
Ops majorfaults-4487M           21631.00 (  0.00%)           4380.00 ( 79.75%)

                 BAS    FAIRALLO
                BASE   FAIRALLOC
User          287.78      460.97
System       2151.67     3142.51
Elapsed      9737.00     8879.34

                                   BAS    FAIRALLO
                                  BASE   FAIRALLOC
Minor Faults                  53721925    57188551
Major Faults                    392195       15157
Swap Ins                       2994854      112770
Swap Outs                      4907092      134982
Direct pages scanned                 0       41824
Kswapd pages scanned          32975063     8128269
Kswapd pages reclaimed         6323069     7093495
Direct pages reclaimed               0       41824
Kswapd efficiency                  19%         87%
Kswapd velocity               3386.573     915.414
Direct efficiency                 100%        100%
Direct velocity                  0.000       4.710
Percentage direct scans             0%          0%
Zone normal velocity          2011.338     550.661
Zone dma32 velocity           1365.623     369.221
Zone dma velocity                9.612       0.242
Page writes by reclaim    18732404.000  614807.000
Page writes file              13825312      479825
Page writes anon               4907092      134982
Page reclaim immediate           85490        5647
Sector Reads                  12080532      483244
Sector Writes                 88740508    65438876
Page rescued immediate               0           0
Slabs scanned                    82560       12160
Direct inode steals                  0           0
Kswapd inode steals              24401       40013
Kswapd skipped wait                  0           0
THP fault alloc                      6           8
THP collapse alloc                5481        5812
THP splits                          75          22
THP fault fallback                   0           0
THP collapse fail                    0           0
Compaction stalls                    0          54
Compaction success                   0          45
Compaction failures                  0           9
Page migrate success            881492       82278
Page migrate failure                 0           0
Compaction pages isolated            0       60334
Compaction migrate scanned           0       53505
Compaction free scanned              0     1537605
Compaction cost                    914          86
NUMA PTE updates              46738231    41988419
NUMA hint faults              31175564    24213387
NUMA hint local faults        10427393     6411593
NUMA pages migrated             881492       55344
AutoNUMA cost                   156221      121361

The overall runtime was reduced, throughput for both the foreground
workload as well as the background IO improved, major faults, swapping and
reclaim activity shrunk significantly, reclaim efficiency more than
quadrupled.

This patch:

When the page allocator fails to get a page from all zones in its given
zonelist, it wakes up the per-node kswapds for all zones that are at their
low watermark.

However, with a system under load the free pages in a zone can fluctuate
enough that the allocation fails but the kswapd wakeup is also skipped
while the zone is still really close to the low watermark.

When one node misses a wakeup like this, it won't be aged before all the
other node's zones are down to their low watermarks again.  And skipping a
full aging cycle is an obvious fairness problem.

Kswapd runs until the high watermarks are restored, so it should also be
woken when the high watermarks are not met.  This ages nodes more equally
and creates a safety margin for the page counter fluctuation.

By using zone_balanced(), it will now check, in addition to the watermark,
if compaction requires more order-0 pages to create a higher order page.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: fix potential NULL pointer dereference

In collapse_huge_page() there is a race window between releasing the
mmap_sem read lock and taking the mmap_sem write lock, so find_vma() may
return NULL.  So check the return value to avoid NULL pointer dereference.

collapse_huge_page
khugepaged_alloc_page
up_read(&mm->mmap_sem)
down_write(&mm->mmap_sem)
vma = find_vma(mm, address)

Signed-off-by: Libin <huawei.libin@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kill one if loop in __free_pages_bootmem()

We should not check loop+1 with loop end in loop body.  Just duplicate two
lines code to avoid it.

That will help a bit when we have huge amount of pages on system with
16TiB memory.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix the value of fallback_migratetype in alloc_extfrag tracepoint()

In the current code, the value of fallback_migratetype that is printed
using the mm_page_alloc_extfrag tracepoint, is the value of the
migratetype *after* it has been set to the preferred migratetype (if the
ownership was changed).  Obviously that wouldn't have been the original
intent.  (We already have a separate 'change_ownership' field to tell
whether the ownership of the pageblock was changed from the
fallback_migratetype to the preferred type.)

The intent of the fallback_migratetype field is to show the migratetype
from which we borrowed pages in order to satisfy the allocation request.
So fix the code to print that value correctly.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_allo.c: restructure free-page stealing code and fix a bug

The free-page stealing code in __rmqueue_fallback() is somewhat hard to
follow, and has an incredible amount of subtlety hidden inside!

First off, there is a minor bug in the reporting of change-of-ownership of
pageblocks.  Under some conditions, we try to move upto
'pageblock_nr_pages' no.  of pages to the preferred allocation list.  But
we change the ownership of that pageblock to the preferred type only if we
manage to successfully move atleast half of that pageblock (or if
page_group_by_mobility_disabled is set).

However, the current code ignores the latter part and sets the
'migratetype' variable to the preferred type, irrespective of whether we
actually changed the pageblock migratetype of that block or not.  So, the
page_alloc_extfrag tracepoint can end up printing incorrect info (i.e.,
'change_ownership' might be shown as 1 when it must have been 0).

So fixing this involves moving the update of the 'migratetype' variable to
the right place.  But looking closer, we observe that the 'migratetype'
variable is used subsequently for checks such as "is_migrate_cma()".
Obviously the intent there is to check if the *fallback* type is
MIGRATE_CMA, but since we already set the 'migratetype' variable to
start_migratetype, we end up checking if the *preferred* type is
MIGRATE_CMA!!

To make things more interesting, this actually doesn't cause a bug in
practice, because we never change *anything* if the fallback type is CMA.

So, restructure the code in such a way that it is trivial to understand
what is going on, and also fix the above mentioned bug.  And while at it,
also add a comment explaining the subtlety behind the migratetype used in
the call to expand().

[akpm@linux-foundation.org: remove unneeded `inline', small coding-style fix]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix coding style and spelling

Fix all errors reported by checkpatch and some small spelling mistakes.

Signed-off-by: Pintu Kumar <pintu.k@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: make cluster allocation per-cpu

swap cluster allocation is to get better request merge to improve
performance.  But the cluster is shared globally, if multiple tasks are
doing swap, this will cause interleave disk access.  While multiple tasks
swap is quite common, for example, each numa node has a kswapd thread
doing swap and multiple threads/processes doing direct page reclaim.

ioscheduler can't help too much here, because tasks don't send swapout IO
down to block layer in the meantime.  Block layer does merge some IOs, but
a lot not, depending on how many tasks are doing swapout concurrently.  In
practice, I've seen a lot of small size IO in swapout workloads.

We makes the cluster allocation per-cpu here.  The interleave disk access
issue goes away.  All tasks swapout to their own cluster, so swapout will
become sequential, which can be easily merged to big size IO.  If one CPU
can't get its per-cpu cluster (for example, there is no free cluster
anymore in the swap), it will fallback to scan swap_map.  The CPU can
still continue swap.  We don't need recycle free swap entries of other
CPUs.

In my test (swap to a 2-disk raid0 partition), this improves around 10%
swapout throughput, and request size is increased significantly.

How does this impact swap readahead is uncertain though.  On one side,
page reclaim always isolates and swaps several adjancent pages, this will
make page reclaim write the pages sequentially and benefit readahead.  On
the other side, several CPU write pages interleave means the pages don't
live _sequentially_ but relatively _near_.  In the per-cpu allocation
case, if adjancent pages are written by different cpus, they will live
relatively _far_.  So how this impacts swap readahead depends on how many
pages page reclaim isolates and swaps one time.  If the number is big,
this patch will benefit swap readahead.  Of course, this is about
sequential access pattern.  The patch has no impact for random access
pattern, because the new cluster allocation algorithm is just for SSD.

Alternative solution is organizing swap layout to be per-mm instead of
this per-cpu approach.  In the per-mm layout, we allocate a disk range for
each mm, so pages of one mm live in swap disk adjacently.  per-mm layout
has potential issues of lock contention if multiple reclaimers are swap
pages from one mm.  For a sequential workload, per-mm layout is better to
implement swap readahead, because pages from the mm are adjacent in disk.
But per-cpu layout isn't very bad in this workload, as page reclaim always
isolates and swaps several pages one time, such pages will still live in
disk sequentially and readahead can utilize this.  For a random workload,
per-mm layout isn't beneficial of request merge, because it's quite
possible pages from different mm are swapout in the meantime and IO can't
be merged in per-mm layout.  while with per-cpu layout we can merge
requests from any mm.  Considering random workload is more popular in
workloads with swap (and per-cpu approach isn't too bad for sequential
workload too), I'm choosing per-cpu layout.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: fix races exposed by swap discard

The previous patch can expose races, according to Hugh:

swapoff was sometimes failing with "Cannot allocate memory", coming from
try_to_unuse()'s -ENOMEM: it needs to allow for swap_duplicate() failing
on a free entry temporarily SWAP_MAP_BAD while being discarded.

We should use ACCESS_ONCE() there, and whenever accessing swap_map
locklessly; but rather than peppering it throughout try_to_unuse(), just
declare *swap_map with volatile.

try_to_unuse() is accustomed to *swap_map going down racily, but not
necessarily to it jumping up from 0 to SWAP_MAP_BAD: we'll be safer to
prevent that transition once SWP_WRITEOK is switched off, when it's a
waste of time to issue discards anyway (swapon can do a whole discard).

Another issue is:

In swapin_readahead(), read_swap_cache_async() can read a bad swap entry,
because we don't check if readahead swap entry is bad.  This doesn't break
anything but such swapin page is wasteful and can only be freed at page
reclaim.  We should avoid read such swap entry.  And in discard, we mark
swap entry SWAP_MAP_BAD and then switch it to normal when discard is
finished.  If readahead reads such swap entry, we have the same issue, so
we much check if swap entry is bad too.

Thanks Hugh to inspire swapin_readahead could use bad swap entry.

[include Hugh's patch 'swap: fix swapoff ENOMEMs from discard']
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: make swap discard async

swap can do cluster discard for SSD, which is good, but there are some
problems here:

1. swap do the discard just before page reclaim gets a swap entry and
   writes the disk sectors.  This is useless for high end SSD, because an
   overwrite to a sector implies a discard to original sector too.  A
   discard + overwrite == overwrite.

2. the purpose of doing discard is to improve SSD firmware garbage
   collection.  Idealy we should send discard as early as possible, so
   firmware can do something smart.  Sending discard just after swap entry
   is freed is considered early compared to sending discard before write.
   Of course, if workload is already bound to gc speed, sending discard
   earlier or later doesn't make

3. block discard is a sync API, which will delay scan_swap_map()
   significantly.

4. Write and discard command can be executed parallel in PCIe SSD.
   Making swap discard async can make execution more efficiently.

This patch makes swap discard async and moves discard to where swap entry
is freed.  Discard and write have no dependence now, so above issues can
be avoided.  Idealy we should do discard for any freed sectors, but some
SSD discard is very slow.  This patch still does discard for a whole
cluster.

My test does a several round of 'mmap, write, unmap', which will trigger a
lot of swap discard.  In a fusionio card, with this patch, the test
runtime is reduced to 18% of the time without it, so around 5.5x faster.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: change block allocation algorithm for SSD

I'm using a fast SSD to do swap.  scan_swap_map() sometimes uses up to
20~30% CPU time (when cluster is hard to find, the CPU time can be up to
80%), which becomes a bottleneck.  scan_swap_map() scans a byte array to
search a 256 page cluster, which is very slow.

Here I introduced a simple algorithm to search cluster.  Since we only
care about 256 pages cluster, we can just use a counter to track if a
cluster is free.  Every 256 pages use one int to store the counter.  If
the counter of a cluster is 0, the cluster is free.  All free clusters
will be added to a list, so searching cluster is very efficient.  With
this, scap_swap_map() overhead disappears.

This might help low end SD card swap too.  Because if the cluster is
aligned, SD firmware can do flash erase more efficiently.

We only enable the algorithm for SSD.  Hard disk swap isn't fast enough
and has downside with the algorithm which might introduce regression (see
below).

The patch slightly changes which cluster is choosen.  It always adds free
cluster to list tail.  This can help wear leveling for low end SSD too.
And if no cluster found, the scan_swap_map() will do search from the end
of last cluster.  So if no cluster found, the scan_swap_map() will do
search from the end of last free cluster, which is random.  For SSD, this
isn't a problem at all.

Another downside is the cluster must be aligned to 256 pages, which will
reduce the chance to find a cluster.  I would expect this isn't a big
problem for SSD because of the non-seek penality.  (And this is the reason
I only enable the algorithm for SSD).

Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: use '__paginginit' instead of '__init'

set_pageblock_order() may be called when memory hotplug, so need use
'__paginginit' instead of '__init'.

The related warning:

  The function __meminit .free_area_init_node() references
  a function __init .set_pageblock_order().
  If .set_pageblock_order is only used by .free_area_init_node then
  annotate .set_pageblock_order with a matching annotation.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix negative left shift count when PAGE_SHIFT > 20

When PAGE_SHIFT > 20, the result of "20 - PAGE_SHIFT" is negative. The
previous calculating here will generate an unexpected result. In
addition, if PAGE_SIZE >= 1MB, The memory size of "numentries" was
already integral multiple of 1MB.

Signed-off-by: Jerry Zhou <uulinux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: replace strict_strtoul() with kstrtoul()

The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmstats: track TLB flush stats on UP too

The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmstats: tlb flush counters

I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.

It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not.  In the end, we really need to know if we
actually _did_ global vs.  local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap.c: get swapper address_space by using macro

There is a proper macro to get the corresponding swapper address space
from a swap entry.  Instead of directly accessing "swapper_spaces" array,
use the "swap_address_space" macro.

Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mmap_region: kill correct_wcount/inode, use allow_write_access()

correct_wcount and inode in mmap_region() just complicate the code.  This
boolean was needed previously, when deny_write_access() was called before
vma_merge(), now we can simply check VM_DENYWRITE and do
allow_write_access() if it is set.

allow_write_access() checks file != NULL, so this is safe even if it was
possible to use VM_DENYWRITE && !file.  Just we need to ensure we use the
same file which was deny_write_access()'ed, so the patch also moves "file
= vma->vm_file" down after allow_write_access().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do_mmap_pgoff: cleanup the usage of file_inode()

Simple cleanup.  Move "struct inode *inode" variable into "if (file)"
block to simplify the code and avoid the unnecessary check.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: shift VM_GROWS* check from mmap_region() to do_mmap_pgoff()

mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set.
In particular this means that mmap_region()->vma_merge(file, vm_flags)
must always fail if "vm_flags & VM_GROWS" is set incorrectly.

So it does not make sense to check VM_GROWS* after we already allocated
the new vma, the only caller, do_mmap_pgoff(), which can pass this flag
can do the check itself.

And this looks a bit more correct, mmap_region() already unmapped the
old mapping at this stage. But if mmap() is going to fail, it should
avoid do_munmap() if possible.

Note: we check VM_GROWS at the end to ensure that do_mmap_pgoff() won't
return EINVAL in the case when it currently returns another error code.

Many thanks to Hugh who nacked the buggy v1.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swapfile.c: convert to pr_foo()

A few 80-col gymnastics were cleaned up as a result.

Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: warn when a swap area overflows the maximum size

It is possible to swapon a swap area that is too big for the pte width
to handle.

Presently this failure happens silently.

Instead, emit a diagnostic to warn the user.

Testing results, root prompt commands and kernel log messages:

# lvresize /dev/system/swap --size 16G
# mkswap /dev/system/swap
# swapon /dev/system/swap

Jul  7 04:27:22 warfang kernel: Adding 16777212k swap
on /dev/mapper/system-swap.  Priority:-1 extents:1 across:16777212k

# lvresize /dev/system/swap --size 64G
# mkswap /dev/system/swap
# swapon /dev/system/swap

Jul  7 04:27:22 warfang kernel: Truncating oversized swap area, only
using 33554432k out of 67108860k
Jul  7 04:27:22 warfang kernel: Adding 33554428k swap
on /dev/mapper/system-swap.  Priority:-1 extents:1 across:33554428k

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Raymond Jennings <shentino@gmail.com>
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/madvise.c: fix coding-style errors

This fixes following errors:
- ERROR: "(foo*)" should be "(foo *)"
- ERROR: "foo ** bar" should be "foo **bar"

Signed-off-by: Vladimir Cernov <gg.kaspersky@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mempolicy: turn vma_set_policy() into vma_dup_policy()

Simple cleanup.  Every user of vma_set_policy() does the same work, this
looks a bit annoying imho.  And the new trivial helper which does
mpol_dup() + vma_set_policy() to simplify the callers.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/block/swim.c: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release or
on probe failure.  Thus, it is not needed to manually clear the device
driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cciss: set max scatter gather entries to 32 on P600

At one time we used to set the maximum number of scatter gather elements
on all Smart Array controllers to 32.  At some point in time the
firmware began to write the "appropriate" value for each controller into
the config table.  The cciss driver would then read that and set
h->maxsgentries.

        h->maxsgentries = readl(&(h->cfgtable->MaxSGElements);

On the P600 that value is 544.  Under some workloads a significant
performance reduction may result.  This patch forces the P600 to use
only 32 scatter gather elements.  Other controllers are not affected.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Dwight (Bud) Brown <bubrown@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Stephen M. Cameron <steve.cameron@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/block/mg_disk.c: make mg_times_out() static

mg_times_out() is used only in this file.  Fix the following sparse
warning:

  drivers/block/mg_disk.c:639:6: warning: symbol 'mg_times_out' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block: support embedded device command line partition

Read block device partition table from command line.  The partition used
for fixed block device (eMMC) embedded device.  It is no MBR, save
storage space.  Bootloader can be easily accessed by absolute address of
data on the block device.  Users can easily change the partition.

This code reference MTD partition, source "drivers/mtd/cmdlinepart.c"
About the partition verbose reference
"Documentation/block/cmdline-partition.txt"

[akpm@linux-foundation.org: fix printk text]
[yongjun_wei@trendmicro.com.cn: fix error return code in parse_parts()]
Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: "Wanglin (Albert)" <albert.wanglin@huawei.com>
Cc: Marius Groeger <mag@sysgo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block/blk-sysfs.c: replace strict_strtoul() with kstrtoul()

The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block: replace strict_strtoul() with kstrtoul()

The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid

task_struct->pid/tgid should go away.

1. Change same_thread_group() to use task->signal for comparison.

2. Change has_group_leader_pid(task) to compare task_pid(task) with
   signal->leader_pid.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix the end cluster offset of FIEMAP

Call fiemap ioctl(2) with given start offset as well as an desired mapping
range should show extents if possible.  However, we somehow figure out the
end offset of mapping via 'mapping_end -= cpos' before iterating the
extent records which would cause problems if the given fiemap length is
too small to a cluster size, e.g,

Cluster size 4096:
debugfs.ocfs2 1.6.3
        Block Size Bits: 12   Cluster Size Bits: 12

The extended fiemap test utility From David:
https://gist.github.com/anonymous/6172331

# dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000
# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 0 extents:
# Logical          Physical         Length           Flags
^^^^^ <-- No extent is shown

In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the
loop of searching extent records was not executed at all.

This patch remove the in question 'mapping_end -= cpos', and loops
until the cpos is larger than the mapping_end as usual.

# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 1 extents:
# Logical          Physical         Length           Flags
0: 0000000000000000 0000000056a01000 0000000006a00000 0000

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reported-by: David Weber <wb@munzinger.de>
Tested-by: David Weber <wb@munzinger.de>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fashen <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: remove unused variable ip in dlmfs_get_root_inode()

Variable ip in dlmfs_get_root_inode() is defined but not used.  So clean
it up.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix a tiny race case when firing callbacks

In o2hb_shutdown_slot() and o2hb_check_slot(), since event is defined as
local, it is only valid during the call stack.  So the following tiny race
case may happen in a multi-volumes mounted environment:

o2hb-vol1                         o2hb-vol2
1) o2hb_shutdown_slot
allocate local event1
2) queue_node_event
add event1 to global o2hb_node_events
                                  3) o2hb_shutdown_slot
                                  allocate local event2
                                  4) queue_node_event
                                  add event2 to global o2hb_node_events
                                  5) o2hb_run_event_list
                                  delete event1 from o2hb_node_events
6) o2hb_run_event_list
event1 empty, return
7) o2hb_shutdown_slot
event1 lifecycle ends
                                  8) o2hb_fire_callbacks
                                  event1 is already *invalid*

This patch lets it wait on o2hb_callback_sem when another thread is firing
callbacks.  And for performance consideration, we only call
o2hb_run_event_list when there is an event queued.

Signed-off-by: Joyce <xuejiufei@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: avoid possible NULL pointer dereference in o2net_accept_one()

Since o2nm_get_node_by_num() may return NULL, we add this check in
o2net_accept_one() to avoid possible NULL pointer dereference.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: adjust code style for o2net_handler_tree_lookup()

Code in o2net_handler_tree_lookup() may be corrupted by mistake.  So
adjust it to promote readability.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: free path in ocfs2_remove_inode_range()

In ocfs2_remove_inode_range(), there is a memory leak.  The variable path
has allocated memory with ocfs2_new_path_from_et(), but it is not free.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix possible double free in ocfs2_reflink_xattr_rec

In ocfs2_reflink_xattr_rec(), meta_ac and data_ac are allocated by calling
ocfs2_lock_reflink_xattr_rec_allocators().

Once an error occurs when allocating *data_ac, it frees *meta_ac which is
allocated before.  Here it mistakenly sets meta_ac to NULL but *meta_ac.
Then ocfs2_reflink_xattr_rec() will try to free meta_ac again which is
already invalid.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: force clean refmap when doing local cleanup

dlm_do_local_recovery_cleanup() should force clean refmap if the owner of
lockres is UNKNOWN.  Otherwise node may hang when umounting filesystems.
Here's the situation:

Node1                                    Node2
dlmlock()
  -> dlm_get_lock_resource()
send DLM_MASTER_REQUEST_MSG to
other nodes.

                                       trying to master this lockres,
                                       return MAYBE.

selected as the master of lockresA,
set mle->master to Node1,
and do assert_master,
send DLM_ASSERT_MASTER_MSG to Node2.
                                       Node 2 has interest on lockresA
                                       and return
                                       DLM_ASSERT_RESPONSE_MASTERY_REF
                                       then something happened and
                                       Node2 crashed.

Receiving DLM_ASSERT_RESPONSE_MASTERY_REF, set Node2 into refmap, and keep
sending DLM_ASSERT_MASTER_MSG to other nodes

o2hb found node2 down, calling dlm_hb_node_down() -->
dlm_do_local_recovery_cleanup() the master of lockresA is still UNKNOWN,
no need to call dlm_free_dead_locks().

Set the master of lockresA to Node1, but Node2 stills remains in refmap.

When Node1 umount, it found that the refmap of lockresA is not empty and
attempted to migrate it to Node2, But Node2 is already down, so umount
hang, trying to migrate lockresA again and again.

Signed-off-by: joyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: free meta_ac and data_ac when ocfs2_start_trans fails in ocfs2_xattr_set()

In ocfs2_xattr_set(), if ocfs2_start_trans failed, meta_ac and data_ac
should be free.  Otherwise, It would lead to a memory leak.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: add the missing return value check of ocfs2_xattr_get_clusters

In ocfs2_xattr_value_attach_refcount(), if error occurs when calling
ocfs2_xattr_get_clusters(), it will go with unexpected behavior since
local variables p_cluster, num_clusters and ext_flags are declared without
initialization.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix a memory leak in __ocfs2_move_extents()

The ocfs2 path is not properly freed which leads to a memory leak at
__ocfs2_move_extents().

This patch stops the leaks of the ocfs2_path structure.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Younger Liu <younger.liu@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: add missing return value check of ocfs2_get_clusters()

In ocfs2_attach_refcount_tree() and ocfs2_duplicate_extent_list(), if
error occurs when calling ocfs2_get_clusters(), it will go with
unexpected behavior as local variables p_cluster, num_clusters and
ext_flags are declared without initialization.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: clean up dead code in ocfs2_acl_from_xattr()

In ocfs2_acl_from_xattr(), if size is less than sizeof(struct
posix_acl_entry), it returns ERR_PTR(-EINVAL) directly.  Then assign (size
/ sizeof(struct posix_acl_entry)) to count which will be at least 1, that
means the following branch (count < 0) and (count == 0) will never be
true.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: use list_for_each_entry() instead of list_for_each()

[dan.carpenter@oracle.com: fix up some NULL dereference bugs]
Signed-off-by: Dong Fang <yp.fangdong@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ocfs2/cluster/tcp.c: fix possible null pointer dereferences

Fix some possible null pointer dereferences that were detected by the
static code analyser, smatch.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: Guozhonghua <guozhonghua@h3c.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: ac_bits_wanted should be local_alloc_bits when returns -ENOSPC

There is an issue in reserving and claiming space for localalloc, When
localalloc space is not enough, it would claim space from global_bitmap.
And if there is not enough free space in global_bitmap, the size of
claiming space would set to half of orignal size and retry.

The issue is as follows: osb->local_alloc_bits is set to half of orignal
size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to
osb->local_alloc_default_bits which is not changed.  localalloc always
reserves and claims local_alloc_default_bits space and returns ENOSPC.

So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be
changed.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: dlm_request_all_locks() should deal with the status sent from target node

dlm_request_all_locks() should deal with the status sent from target node
if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall
into endless loop, waiting for other nodes to send locks and
DLM_RECO_DATA_DONE_MSG to me.

        NodeA                                  NodeB
                                     selected as recovery master
                                     dlm_remaster_locks()
                                     ->dlm_request_all_locks()
                                     send DLM_LOCK_REQUEST_MSG to nodeA

It happened that NodeA cannot alloc memory when it processes this
message.  dlm_request_all_locks_handler() do not queue
dlm_request_all_locks_worker and returns -ENOMEM.  It will never send
locks and DLM_RECO_DATA_DONE_MSG to NodeB.

                                    NodeB do not deal with the status
                                    sent from nodeA, and will fall in
                                    endless loop waiting for the
                                    recovery state of NodeA to be
                                    changed.

Signed-off-by: joyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: use i_size_read() to access i_size

Though ocfs2 uses inode->i_mutex to protect i_size, there are both
i_size_read/write() and direct accesses.  Clean up all direct access to
eliminate confusion.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: lighten up allocate transaction

The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transaction.  For
some journal sizes, there may be not enough room for this transaction,
and the fallocate will fail.

The patch below extends & restarts the transaction as necessary while
allocating space, and should work with even the smallest journal.  This
patch refers ext4 resize.

Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc
...(jounral size is 32M)
# mount.ocfs2 /dev/sdc /mnt/ocfs2/
# touch /mnt/ocfs2/1.log
# fallocate -o 0 -l 400G /mnt/ocfs2/1.log
fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory
# tail -f /var/log/messages
[ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048)
[ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12
[ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12
[ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12
^C
With this patch, the test works well.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/iommu: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release or
on probe failure.  Thus, it is not needed to manually clear the device
driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/acornfb.c: remove dead code

acornfb checks for HAS_VIDC while support for that macro was removed in
v2.6.23 (when the arm26 port was removed).  So we can remove a bit of
dead code.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fork: unify and tighten up CLONE_NEWUSER/CLONE_NEWPID checks

do_fork() denies CLONE_THREAD | CLONE_PARENT if NEWUSER | NEWPID.

Then later copy_process() denies CLONE_SIGHAND if the new process will
be in a different pid namespace (task_active_pid_ns() doesn't match
current->nsproxy->pid_ns).

This looks confusing and inconsistent.  CLONE_NEWPID is very similar to
the case when ->pid_ns was already unshared, we want the same
restrictions so copy_process() should also nack CLONE_PARENT.

And it would be better to deny CLONE_NEWUSER && CLONE_SIGHAND as well
just for consistency.

Kill the "CLONE_NEWUSER | CLONE_NEWPID" check in do_fork() and change
copy_process() to do the same check along with ->pid_ns check we already
have.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Walters <walters@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pidns: kill the unnecessary CLONE_NEWPID in copy_process()

Commit 8382fcac1b81 ("pidns: Outlaw thread creation after
unshare(CLONE_NEWPID)") nacks CLONE_NEWPID if the forking process
unshared pid_ns.  This is correct but unnecessary, copy_pid_ns() does
the same check.

Remove the CLONE_NEWPID check to cleanup the code and prepare for the
next change.

Test-case:

static int child(void *arg)
{
return 0;
}

static char stack[16 * 1024];

int main(void)
{
pid_t pid;

assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0);

pid = clone(child, stack + sizeof(stack) / 2,
CLONE_NEWPID | SIGCHLD, NULL);
assert(pid < 0 && errno == EINVAL);

return 0;
}

clone(CLONE_NEWPID) correctly fails with or without this change.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Walters <walters@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pidns: fix vfork() after unshare(CLONE_NEWPID)

Commit 8382fcac1b81 ("pidns: Outlaw thread creation after
unshare(CLONE_NEWPID)") nacks CLONE_VM if the forking process unshared
pid_ns, this obviously breaks vfork:

int main(void)
{
assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0);
assert(vfork() >= 0);
_exit(0);
return 0;
}

fails without this patch.

Change this check to use CLONE_SIGHAND instead.  This also forbids
CLONE_THREAD automatically, and this is what the comment implies.

We could probably even drop CLONE_SIGHAND and use CLONE_THREAD, but it
would be safer to not do this.  The current check denies CLONE_SIGHAND
implicitely and there is no reason to change this.

Eric said "CLONE_SIGHAND is fine.  CLONE_THREAD would be even better.
Having shared signal handling between two different pid namespaces is
the case that we are fundamentally guarding against."

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Colin Walters <walters@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/smp.h:on_each_cpu(): switch back to a C function

Revert commit c846ef7deba2 ("include/linux/smp.h:on_each_cpu(): switch
back to a macro").  It turns out that the problematic linux/irqflags.h
include was fixed within ia64 and mn10300.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:
 "This includes one bpf/jit bug fix where the jit compiler could
  sometimes write generated code out of bounds of the allocated memory
  area.

  The rest of the patches are only cleanups and minor improvements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/irq: reduce size of external interrupt handler hash array
  s390/compat,uid16: use current_cred()
  s390/ap_bus: use and-mask instead of a cast
  s390/ftrace: avoid pointer arithmetics with function pointers
  s390: make various functions static, add declarations to header files
  s390/compat signal: add couple of __force annotations
  s390/mm: add __releases()/__acquires() annotations to gmap_alloc_table()
  s390: keep Kconfig sorted
  s390/irq: rework irq subclass handling
  s390/irq: use hlists for external interrupt handler array
  s390/dumpstack: convert print_symbol to %pSR
  s390/perf: Remove print_hex_dump_bytes() debug output
  s390: update defconfig
  s390/bpf,jit: fix address randomization

Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild

Pull kconfig updates from Michal Marek:
 "This is the kconfig part of kbuild for v3.12-rc1:
   - post-3.11 search code fixes and micro-optimizations
   - CONFIG_MODULES is no longer a special case; this is needed to
     eventually fix the bug that using KCONFIG_ALLCONFIG breaks
     allmodconfig
   - long long is used to store hex and int values
   - make silentoldconfig no longer warns when a symbol changes from
     tristate to bool (it's a job for make oldconfig)
   - scripts/diffconfig updated to work with newer Pythons
   - scripts/config does not rely on GNU sed extensions"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: do not allow more than one symbol to have 'option modules'
  kconfig: regenerate bison parser
  kconfig: do not special-case 'MODULES' symbol
  diffconfig: Update script to support python versions 2.5 through 3.3
  diffconfig: Gracefully exit if the default config files are not present
  modules: do not depend on kconfig to set 'modules' option to symbol MODULES
  kconfig: silence warning when parsing auto.conf when a symbol has changed type
  scripts/config: use sed's POSIX interface
  kconfig: switch to "long long" for sanity
  kconfig: simplify symbol-search code
  kconfig: don't allocate n+1 elements in temporary array
  kconfig: minor style fixes in symbol-search code
  kconfig/[mn]conf: shorten title in search-box
  kconfig: avoid multiple calls to strlen
  Documentation/kconfig: more concise and straightforward search explanation

Merge tag 'for-v3.12' of git://git.infradead.org/battery-2.6

Pull battery/power supply driver updates from Anton Vorontsov:
 "New drivers:

   - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).

   - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).

   - Texas Instruments BQ24190 charger driver by Mark A.  Greer (Animal
     Creek Technologies).

   - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and
     Marek Belisko (Golden Delicious Computers).  The driver is used on
     Freerunner GTA04 phones.

  Highlighted fixes and improvements:

   - Suspend/wakeup logic improvements: power supply objects will block
     system suspend until all power supply events are processed.  Thanks
     to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)"

* tag 'for-v3.12' of git://git.infradead.org/battery-2.6:
  rx51_battery: Fix channel number when reading adc value
  power: Add twl4030_madc battery driver.
  bq24190_charger: Workaround SS definition problem on i386 builds
  power_supply: Prevent suspend until power supply events are processed
  vexpress-poweroff: Should depend on the required infrastructure
  twl4030-charger: Fix compiler warning with regulator_enable()
  rx51_battery: Replace hardcoded channels values.
  bq24190_charger: Add support for TI BQ24190 Battery Charger
  ab8500-charger: We print an unintended error message
  max8925_power: Fix missing of_node_put
  power_supply: Replace strict_strtol() with kstrtol()
  power: Add APM X-Gene system reboot driver
  power_supply: tosa_battery: Get rid of irq_to_gpio usage
  power supply: collie_battery: Convert to use dev_pm_ops
  power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
  power: reset: Add msm restart support
  MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a handful of small powerpc fixes.

  A couple of section mismatches (always worth fixing), a missing export
  of a new symbol causing build failures of modules, a page fault
  deadlock fix (interestingly that bug has been around for a LONG time,
  though it seems to be more easily triggered by KVM) and fixing pseries
  default idle loop in the absence of the cpuidle drivers (such as
  during boot)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Default arch idle could cede processor on pseries
  fbdev/ps3fb: Fix section mismatch warning for ps3fb_probe
  powerpc: Fix section mismatch warning for prom_rtas_call
  powerpc: Fix possible deadlock on page fault
  powerpc: Export cpu_to_chip_id() to fix build error

Merge tag 'stable/for-linus-3.12-rc0-tag-two' of git://git./linux/kernel/git/xen/tip

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 "This pull I usually do after rc1 is out but because we have a nice
  amount of fixes, some bootup related fixes for ARM, and it is early in
  the cycle we figured to do it now to help with tracking of potential
  regressions.

  The simple ones are the ARM ones - one of the patches fell through the
  cracks, other fixes a bootup issue (unconditionally using Xen
  functions).  Then a fix for a regression causing preempt count being
  off (patch causing this went in v3.12).

  Lastly are the fixes to make Xen PVHVM guests use PV ticketlocks (Xen
  PV already does).

  The enablement of that was supposed to be part of the x86 spinlock
  merge in commit 816434ec4a67 ("The biggest change here are
  paravirtualized ticket spinlocks (PV spinlocks), which bring a nice
  speedup on various benchmarks...") but unfortunatly it would cause
  hang when booting Xen PVHVM guests.  Yours truly got all of the bugs
  fixed last week and they (six of them) are included in this pull.

  Bug-fixes:
   - Boot on ARM without using Xen unconditionally
   - On Xen ARM don't run cpuidle/cpufreq
   - Fix regression in balloon driver, preempt count warnings
   - Fixes to make PVHVM able to use pv ticketlock.
   - Revert Xen PVHVM disabling pv ticketlock (aka, re-enable pv ticketlocks)"

* tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/spinlock: Don't use __initdate for xen_pv_spin
  Revert "xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM"
  xen/spinlock: Don't setup xen spinlock IPI kicker if disabled.
  xen/smp: Update pv_lock_ops functions before alternative code starts under PVHVM
  xen/spinlock: We don't need the old structure anymore
  xen/spinlock: Fix locking path engaging too soon under PVHVM.
  xen/arm: disable cpuidle and cpufreq when linux is running as dom0
  xen/p2m: Don't call get_balloon_scratch_page() twice, keep interrupts disabled for multicalls
  ARM: xen: only set pm function ptrs for Xen guests