velemas [Tue, 6 Dec 2016 19:17:43 +0000 (22:17 +0300)]
platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
Like other Y700 models Lenovo Y700 15-ACZ does not have a physical rfkill switch.
ideapad-laptop wrongly reports all radios as blocked by hardware which causes
wireless network connections to fail.
Add this model without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: Artiom Vaskov <velemas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Benjamin Tissoires [Mon, 5 Dec 2016 15:10:33 +0000 (16:10 +0100)]
platform/x86: Introduce button support for the Surface 3
The Surface 3 is not following the ACPI spec for PNP0C40, but nearly.
The device is connected to a I2C device that might have some magic
but we don't know about.
Just create the device after the enumeration and use the declared GPIOs
to provide button support.
This driver is just an adaptation of drivers/input/misc/soc_button_array.c
The Surface Pro 3 is using an ACPI driver and matches against the bid
of the device ("VGBI"). To prevent this incompatible driver to be used
on the Surface Pro, we add a match on the Surface 3 bid "TEV2".
link: https://bugzilla.kernel.org/show_bug.cgi?id=102761
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Benjamin Tissoires [Fri, 25 Nov 2016 16:11:41 +0000 (17:11 +0100)]
platform/x86: Add custom surface3 platform device for controlling LID
The LID state provided by ACPI on the Surface 3 is not accurate.
The ACPI node doesn't get notified on LID open, which means the
LID input switch stays close most of the time.
Fortunatelly, there is a WMI method which directly queries the
GPIO underneath the LID state, so it's far more reliable than ACPI.
To get the notifications that the LID was opened/closed, we can
rely on the ACPI notification of the touchscreen: the DSDT shows
that the touchscreen will get notified on close/open as it also
controls its _STA method.
Note that we need to set the tag "power-switch" to the LID
input node through a udev rule for logind to accept it:
SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="surface3-wmi", \
TAG+="power-switch"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Vadim Pasternak [Thu, 27 Oct 2016 19:55:54 +0000 (19:55 +0000)]
platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
Add calls for mlxcpld-hotplug platform driver registration/unregistration
and add platform hotplug data configurations. This driver, when registered
within system will handle system hot-plug events for the power suppliers,
power cables and fans (insertion and removing). These events are
controlled through CPLD Lattice device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
kbuild test robot [Thu, 27 Oct 2016 17:26:50 +0000 (01:26 +0800)]
platform/x86: mlx-platform: Fix semicolon.cocci warnings
drivers/platform/x86/mlx-platform.c:219:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
CC: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Vadim Pasternak [Mon, 31 Oct 2016 07:22:33 +0000 (07:22 +0000)]
platform/x86: mlx-platform: Move module from arch/x86
Since mlx-platform is not an architectural driver, it is moved out
of arch/x86/platform to drivers/platform/x86.
Relevant Makefile and Kconfig are updated.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Darren Hart [Wed, 14 Dec 2016 22:45:48 +0000 (14:45 -0800)]
platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type
linux-next reported in_tablet_mode and type may be used uninitialized
after:
b31800283868 ("platform/x86: thinkpad_acpi: Move tablet detection into separate function")
This turns out to be a false positive as the pr_info call cannot be
reached if tp_features.hotkey_tablet (global scope) is 0, and
in_tablet_mode and type are assigned in both places
tp_features.hotkey_tablet is assigned.
Regardless, to make it explicit and avoid further reports, initialize
in_tablet_mode to 0 and type to NULL.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lyude <lyude@redhat.com>
Hans de Goede [Wed, 26 Oct 2016 15:17:44 +0000 (17:17 +0200)]
platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set
kbd_led_level_set uses dell_smbios call which blocks, so the kbd_led
classdev should use the brightness_set_blocking callback.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tobias Klauser [Fri, 25 Nov 2016 13:18:07 +0000 (14:18 +0100)]
platform/x86: thinkpad_acpi: Fix old style declaration GCC warning
Fix an [-Wold-style-declaration] GCC warning by moving the inline
keyword before the return type.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Hui Wang [Tue, 8 Nov 2016 08:13:23 +0000 (16:13 +0800)]
platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad
Recently we met an issue on lots of Lenovo thinkpad laptops (those
laptops are not released to market yet), the issue is that the
thinkpad_acpi.ko can't be automatically loaded as before.
Through debugging, we found the HKEY_HID is LEN0268 instead of
LEN0068 on those machines, and the MHKV is 0x200 instead of
0x100. So adding the new ID into the driver.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lyude [Fri, 11 Nov 2016 20:15:03 +0000 (15:15 -0500)]
platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode
For whatever reason, the X1 Yoga doesn't support the normal method of
querying for tablet mode. Instead of providing the MHKG method under the
hotkey handle, we're instead given the CMMD method under the EC handle.
Values on this handle are either 0x1, laptop mode, or 0x6, tablet mode.
Tested-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Lyude <lyude@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lyude [Fri, 11 Nov 2016 20:15:02 +0000 (15:15 -0500)]
platform/x86: thinkpad_acpi: Move tablet detection into separate function
The hotkey events and ACPI handles used for detecting tablet mode on a
few of the newer thinkpad models (Yoga X1 and the Yoga 260 specifically)
have been changed around, so unfortunately this means we're definitely
going to need to probe for multiple types of tablet mode support. Since
the hotkey_init() is already a lot larger than it should be, let's split
up this detection into its own function to make things a little easier
to read.
As well, since we're going to have multiple types of tablet modes, make
hotkey_tablet into an enum so we can also use it to indicate the type of
tablet mode reporting the machine supports.
Suggested by Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Daniel Martin <consume.noise@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Marcos Paulo de Souza [Wed, 30 Nov 2016 01:23:06 +0000 (23:23 -0200)]
platform/x86: asus-nb-wmi.c: Add X45U quirk
Without this patch, the Asus X45U wireless card can't be turned
on (hard-blocked), but after a suspend/resume it just starts working.
Following this bug report[1], there are other cases like this one, but
this Asus is the only model that I can test.
[1] https://ubuntuforums.org/showthread.php?t=
2181558
Cc: stable@vger.kernel.org # 4.4.x-
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Marcos Paulo de Souza [Wed, 30 Nov 2016 01:08:49 +0000 (23:08 -0200)]
platform/x86: asus-nb-wmi: Make use of dmi->ident
Make use of dmi->ident as other drivers do, like fujitsu, intel,
hp and samsung.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Kai-Chuan Hsieh [Thu, 1 Sep 2016 15:55:55 +0000 (23:55 +0800)]
platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
The bluetooth adapter Atheros AR3012 can't be enumerated
and make the bluetooth function broken.
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3362 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
The error is:
usb 2-6: device not accepting address 7, error -62
usb usb2-port6: unable to enumerate USB device
It is caused by adapter's connected port is mapped to xHC
controller, but the xHCI is not supported by the usb device.
The output of 'sudo lspci -nnxxx -s 00:14.0':
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)
00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00
10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00
50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00
60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00
d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00
e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00
f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00
By referencing Intel Platform Controller Hub(PCH) datasheet,
the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h
decides the setting of mapping the port to EHCI controller or
xHC controller. And the port mapped to xHC will enable xHCI
during bus resume.
The setting of disabling bluetooth adapter's connected port is
0x000001D9. The value can be obtained by few times 1 bit flip
operation. The suited configuration should have the 'lsusb -t'
result with bluetooth using ehci:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
|__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[andy: resolve merge conflict in asus-wmi.h]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Borislav Petkov [Sat, 26 Nov 2016 16:01:51 +0000 (17:01 +0100)]
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
Fix:
drivers/platform/x86/intel_mid_thermal.c:424:12: warning: ‘mid_thermal_resume’
defined but not used [-Wunused-function]
static int mid_thermal_resume(struct device *dev)
^
drivers/platform/x86/intel_mid_thermal.c:436:12: warning: ‘mid_thermal_suspend’
defined but not used [-Wunused-function]
static int mid_thermal_suspend(struct device *dev)
^
which I see during randbuilds here.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Axel Lin [Tue, 20 Sep 2016 09:01:24 +0000 (17:01 +0800)]
platform/x86: intel-vbtn: Switch to use devm_input_allocate_device
Use devm_input_allocate_device to simplify the error handling code.
This conversion also makes input_register_device() to be called after
acpi_remove_notify_handler. This avoid a small window that it's possible
to call notify_handler after unregister input device.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Axel Lin [Mon, 19 Sep 2016 01:33:51 +0000 (09:33 +0800)]
platform/x86: Use ACPI_FAILURE at appropriate places
Use ACPI_FAILURE() to replace !ACPI_SUCCESS(), this avoid !! operations.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Mario Limonciello [Thu, 28 Jul 2016 17:53:48 +0000 (12:53 -0500)]
platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s
The Dell Rugged 7202 has 3 programmable buttons (labeled P1, P2, P3)
and a detachable keyboard/mouse dock.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Mario Limonciello [Thu, 28 Jul 2016 17:53:47 +0000 (12:53 -0500)]
platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN
Wifi catcher is a slider switch, that when slid past the on position
will emit an event that is intended for launching a wifi application
or applet when the machine is turned on.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:17 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: Add KBL CPUID support
This patch adds Kabylake CPU support for pmc_core driver.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:16 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: Add LTR IGNORE debug feature
SPT LTR_IGN register provides a means to make the PMC ignore the LTR values
reported by the individual PCH devices.
echo <IP Offset> > /sys/kernel/debug/pmc_core/ltr_ignore.
When a particular IP Offset bit is set the PMC will ignore the LTR value
reported by the corresponding IP when the PMC performs the latency
coalescing.
IP Offset IP Name
0 SPA
1 SPB
2 SATA
3 GBE
4 XHCI
5 RSVD
6 ME
7 EVA
8 SPC
9 Azalia/ADSP
10 RSVD
11 LPSS
12 SPD
13 SPE
14 Camera
15 ESPI
16 SCC
17 ISH
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
[dvhart: pmc_core_ltr_ignore_write local declaration order cleanup]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:15 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: Add MPHY PLL clock gating status
ModPhy Common lanes can provide the clock gating status for the important
system PLLs such as Gen2 USB3PCIE2 PLL, DMIPCIE3 PLL, SATA PLL and MIPI
PLL.
On SPT, in addition to the crystal oscillator clock, the 100Mhz Gen2
USB3PCI2 PLL clock is used as the PLL reference clock and Gen2 PLL idling
is a necessary condition for the platform to go into low power states like
PC10 and S0ix.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:14 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: ModPhy core lanes pg status
The PCH implements a number of High Speed I/O (HSIO) lanes that are split
between PCIe*, USB 3.0, SATA, GbE, USB OTG and SSIC. This patch shows the
current power gating status of the available ModPhy Core lanes. This is
done by sending a message to the PMC (MTPMC) that contains the XRAM
register offset for the MPHY_CORE_STS_0 and MPHY_CORE_STS_1 and then by
reading the response sent by the PMC (MFPMC).
While enabling low power modes we often encounter situations when the
ModPhy lanes are not power gated and it becomes hard to debug which lane is
active and which is not in the absence of an external hardware debugger
(JTAG/ITP). This patch eliminates the dependency on an external hardware
debugger for reading the ModPhy Lanes power gating status.
This patch requires PMC_READ_DISABLE setting to be disabled in the platform
bios.
cat /sys/kernel/debug/pmc_core/mphy_lanes_power_gating_status
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:13 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
This patch adds the support for reading the power gating status of various
devices present on Sunrise Point PCH. This is intended to be used for
debugging purpose while tuning the platform for power optimizations and
also to understand which devices (on PCH) are blocking the system to enter
a low power state.
Power Management Controller on Sunrise Point PCH provides access to "PGD
PFET Enable Ack Status Registers (ppfear)". This patch reads and decodes
this register and dumps the output in formatted manner showing various
devices present on the PCH and their "Power Gating" status.
Further documentation can be found in Intel 7th Gen Core family mobile u/y
processor io datasheet volume 2.
Sample output (stripped and not in order):
cat /sys/kernel/debug/pmc_core/pch_ip_power_gating_status
PMC State: Not Power gated
OPI-DMI State: Not Power gated
XHCI State: Power gated
LPSS State: Power gated
CSME_PSF State: Not power gated
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Rajneesh Bhardwaj [Fri, 7 Oct 2016 10:31:12 +0000 (16:01 +0530)]
platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
On Sunrise Point PCH, the Power Management Controller provides 4K bytes of
memory space for various power management and debug registers. This fix is
needed to access power management & debug registers that are mapped at a
higher offset.
Also, this provides a fix for correctly masking the PWRMBASE as the initial
bits (0-11) are reserved.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lee, Chun-Yi [Tue, 1 Nov 2016 04:30:58 +0000 (12:30 +0800)]
platform/x86: acer-wmi: Only supports AMW0_GUID1 on acer family
The AMW0_GUID1 wmi is not only found on Acer family but also other
machines like Lenovo, Fujitsu and Medion. In the past, acer-wmi handled
those non-Acer machines by quirks list.
But actually acer-wmi driver was loaded on any machine that had
AMW0_GUID1. This behavior is strange because those machines should be
supported by appropriate wmi drivers. e.g. fujitsu-laptop,
ideapad-laptop.
This patch adds the logic to check the machine that has AMW0_GUID1
should be in Acer/Packard Bell/Gateway white list. But, it still keeps
the quirk list of those supported non-acer machines for backward
compatibility.
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Vadim Pasternak [Thu, 20 Oct 2016 16:28:01 +0000 (16:28 +0000)]
platform/x86: Introduce support for Mellanox hotplug driver
Enable system support for the Mellanox Technologies hotplug platform
driver, which provides support for the next Mellanox basic systems:
"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
"msb7800", "msn2740", "msn2100" and also various number of derivative
systems from the above basic types.
This driver handles hot-plug events for the power suppliers, power
cables and fans for the above systems.
The Kconfig currently controlling compilation of this code is:
driver/platform/x86:config MLX_CPLD_PLATFORM
tristate "Mellanox platform hotplug driver support"
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Linus Torvalds [Wed, 19 Oct 2016 18:45:06 +0000 (11:45 -0700)]
Merge tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix a Kconfig issue leading potential link failure, and add a DMI
match for an existing quirk.
asus-wmi:
- add SERIO_I8042 dependency
ideapad-laptop:
- Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list"
* tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: asus-wmi: add SERIO_I8042 dependency
platform/x86: ideapad-laptop: Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
Linus Torvalds [Wed, 19 Oct 2016 18:21:06 +0000 (11:21 -0700)]
Merge tag 'sh-for-4.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Minor changes to improve J2 support and match Kconfig expectations of
other subsystems"
* tag 'sh-for-4.9' of git://git.libc.org/linux-sh:
sh: add earlycon support to j2_defconfig
sh: add Kconfig option for J-Core SoC core drivers
sh: support CPU_J2 when compiler lacks -mj2
Linus Torvalds [Wed, 19 Oct 2016 17:03:55 +0000 (10:03 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"This fixes a group scheduling related performance/interactivity
regression introduced in v4.8, which affects certain hardware
environments where cpu_possible_mask != cpu_present_mask"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix incorrect task group ->load_avg
Linus Torvalds [Wed, 19 Oct 2016 16:56:57 +0000 (09:56 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- hid-dr regression fix for certain dragonrise gamepads (device ID
0079:0006), from Ioan-Adrian Ratiu
- dma-on-stack fix for hid-led driver, from Heiner Kallweit
- quirk for Akai MIDImix device
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: add quirk for Akai MIDImix.
Revert "HID: dragonrise: fix HID Descriptor for 0x0006 PID"
HID: hid-dr: add input mapping for axis selection
HID: hid-led: fix issue with transfer buffer not being dma capable
Linus Torvalds [Wed, 19 Oct 2016 16:17:29 +0000 (09:17 -0700)]
Merge tag 'pinctrl-v4.9-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull first round of pin control fixes from Linus Walleij:
- a bunch of barnsjukdomar/kinderkrankheiten/maladie infantile in the
Aspeed driver. (Why doesn't English have a word for this?)
[ Maybe "teething problems" is the closest English idiom? - Linus T ]
- fix a lockdep bug on the Intel BayTrail.
- fix a few special laptop issues on the Intel pin controller solving
suspend issues.
* tag 'pinctrl-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Only restore pins that are used by the driver
pinctrl: baytrail: Fix lockdep
pinctrl: aspeed-g5: Fix pin association of SPI1 function
pinctrl: aspeed-g5: Fix GPIOE1 typo
pinctrl: aspeed-g5: Fix names of GPID2 pins
pinctrl: aspeed: "Not enabled" is a significant mux state
Linus Torvalds [Wed, 19 Oct 2016 16:11:24 +0000 (09:11 -0700)]
printk: suppress empty continuation lines
We have a fairly common pattern where you print several things as
continuations on one single line in a loop, and then at the end you do
printk(KERN_CONT "\n");
to flush the buffered output.
But if the output was flushed by something else (concurrent printk
activity, or just system logging), we don't want that final flushing to
just print an empty line.
So just suppress empty continuation lines when they couldn't be merged
into the line they are a continuation of.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 Oct 2016 15:39:47 +0000 (08:39 -0700)]
Merge branch 'gup_flag-cleanups'
Merge the gup_flags cleanups from Lorenzo Stoakes:
"This patch series adjusts functions in the get_user_pages* family such
that desired FOLL_* flags are passed as an argument rather than
implied by flags.
The purpose of this change is to make the use of FOLL_FORCE explicit
so it is easier to grep for and clearer to callers that this flag is
being used. The use of FOLL_FORCE is an issue as it overrides missing
VM_READ/VM_WRITE flags for the VMA whose pages we are reading
from/writing to, which can result in surprising behaviour.
The patch series came out of the discussion around commit
38e088546522
("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"),
which addressed a BUG_ON() being triggered when a page was faulted in
with PROT_NONE set but having been overridden by FOLL_FORCE.
do_numa_page() was run on the assumption the page _must_ be one marked
for NUMA node migration as an actual PROT_NONE page would have been
dealt with prior to this code path, however FOLL_FORCE introduced a
situation where this assumption did not hold.
See
https://marc.info/?l=linux-mm&m=
147585445805166
for the patch proposal"
Additionally, there's a fix for an ancient bug related to FOLL_FORCE and
FOLL_WRITE by me.
[ This branch was rebased recently to add a few more acked-by's and
reviewed-by's ]
* gup_flag-cleanups:
mm: replace access_process_vm() write parameter with gup_flags
mm: replace access_remote_vm() write parameter with gup_flags
mm: replace __access_remote_vm() write parameter with gup_flags
mm: replace get_user_pages_remote() write/force parameters with gup_flags
mm: replace get_user_pages() write/force parameters with gup_flags
mm: replace get_vaddr_frames() write/force parameters with gup_flags
mm: replace get_user_pages_locked() write/force parameters with gup_flags
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
mm: remove write/force parameters from __get_user_pages_unlocked()
mm: remove write/force parameters from __get_user_pages_locked()
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:20 +0000 (01:20 +0100)]
mm: replace access_process_vm() write parameter with gup_flags
This removes the 'write' argument from access_process_vm() and replaces
it with 'gup_flags' as use of this function previously silently implied
FOLL_FORCE, whereas after this patch callers explicitly pass this flag.
We make this explicit as use of FOLL_FORCE can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:19 +0000 (01:20 +0100)]
mm: replace access_remote_vm() write parameter with gup_flags
This removes the 'write' argument from access_remote_vm() and replaces
it with 'gup_flags' as use of this function previously silently implied
FOLL_FORCE, whereas after this patch callers explicitly pass this flag.
We make this explicit as use of FOLL_FORCE can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:18 +0000 (01:20 +0100)]
mm: replace __access_remote_vm() write parameter with gup_flags
This removes the 'write' argument from __access_remote_vm() and replaces
it with 'gup_flags' as use of this function previously silently implied
FOLL_FORCE, whereas after this patch callers explicitly pass this flag.
We make this explicit as use of FOLL_FORCE can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:17 +0000 (01:20 +0100)]
mm: replace get_user_pages_remote() write/force parameters with gup_flags
This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:16 +0000 (01:20 +0100)]
mm: replace get_user_pages() write/force parameters with gup_flags
This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:15 +0000 (01:20 +0100)]
mm: replace get_vaddr_frames() write/force parameters with gup_flags
This removes the 'write' and 'force' from get_vaddr_frames() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:14 +0000 (01:20 +0100)]
mm: replace get_user_pages_locked() write/force parameters with gup_flags
This removes the 'write' and 'force' use from get_user_pages_locked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vincent Guittot [Wed, 19 Oct 2016 12:45:23 +0000 (14:45 +0200)]
sched/fair: Fix incorrect task group ->load_avg
A scheduler performance regression has been reported by Joseph Salisbury,
which he bisected back to:
3d30544f0212 ("sched/fair: Apply more PELT fixes)
The regression triggers when several levels of task groups are involved
(read: SystemD) and cpu_possible_mask != cpu_present_mask.
The root cause is that group entity's load (tg_child->se[i]->avg.load_avg)
is initialized to scale_load_down(se->load.weight). During the creation of
a child task group, its group entities on possible CPUs are attached to
parent's cfs_rq (tg_parent) and their loads are added to the parent's load
(tg_parent->load_avg) with update_tg_load_avg().
But only the load on online CPUs will then be updated to reflect real load,
whereas load on other CPUs will stay at the initial value.
The result is a tg_parent->load_avg that is higher than the real load, the
weight of group entities (tg_parent->se[i]->load.weight) on online CPUs is
smaller than it should be, and the task group gets a less running time than
what it could expect.
( This situation can be detected with /proc/sched_debug. The ".tg_load_avg"
of the task group will be much higher than sum of ".tg_load_avg_contrib"
of online cfs_rqs of the task group. )
The load of group entities don't have to be intialized to something else
than 0 because their load will increase when an entity is attached.
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org> # 4.8.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joonwoop@codeaurora.org
Fixes:
3d30544f0212 ("sched/fair: Apply more PELT fixes)
Link: http://lkml.kernel.org/r/1476881123-10159-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rich Felker [Tue, 18 Oct 2016 22:54:56 +0000 (18:54 -0400)]
sh: add earlycon support to j2_defconfig
Signed-off-by: Rich Felker <dalias@libc.org>
Rich Felker [Thu, 13 Oct 2016 19:51:47 +0000 (15:51 -0400)]
sh: add Kconfig option for J-Core SoC core drivers
Signed-off-by: Rich Felker <dalias@libc.org>
Linus Torvalds [Tue, 18 Oct 2016 21:15:23 +0000 (14:15 -0700)]
Merge tag 'for-f2fs-4.9-rc2' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs bugfix from Jaegeuk Kim:
"This fixes a bug which referenced the wrong pointer, sum_page, in
f2fs_gc. It was newly introduced in 4.9-rc1.
* tag 'for-f2fs-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix wrong sum_page pointer in f2fs_gc
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:13 +0000 (01:20 +0100)]
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
This removes the 'write' and 'force' use from get_user_pages_unlocked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:12 +0000 (01:20 +0100)]
mm: remove write/force parameters from __get_user_pages_unlocked()
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_unlocked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:11 +0000 (01:20 +0100)]
mm: remove write/force parameters from __get_user_pages_locked()
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_locked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 13 Oct 2016 20:07:36 +0000 (13:07 -0700)]
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
This is an ancient bug that was actually attempted to be fixed once
(badly) by me eleven years ago in commit
4ceb5db9757a ("Fix
get_user_pages() race for write access") but that was then undone due to
problems on s390 by commit
f33ea7f404e5 ("fix get_user_pages bug").
In the meantime, the s390 situation has long been fixed, and we can now
fix it by checking the pte_dirty() bit properly (and do it better). The
s390 dirty bit was implemented in
abf09bed3cce ("s390/mm: implement
software dirty bits") which made it into v3.9. Earlier kernels will
have to look at the page state itself.
Also, the VM has become more scalable, and what used a purely
theoretical race back then has become easier to trigger.
To fix it, we introduce a new internal FOLL_COW flag to mark the "yes,
we already did a COW" rather than play racy games with FOLL_WRITE that
is very fundamental, and then use the pte dirty flag to validate that
the FOLL_COW flag is still valid.
Reported-and-tested-by: Phil "not Paul" Oester <kernel@linuxace.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 18 Oct 2016 16:59:04 +0000 (09:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes, plus hw-enablement changes:
- fix persistent RAM handling
- remove pkeys warning
- remove duplicate macro
- fix debug warning in irq handler
- add new 'Knights Mill' CPU related constants and enable the perf bits"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add Knights Mill CPUID
perf/x86/intel/rapl: Add Knights Mill CPUID
perf/x86/intel: Add Knights Mill CPUID
x86/cpu/intel: Add Knights Mill to Intel family
x86/e820: Don't merge consecutive E820_PRAM ranges
pkeys: Remove easily triggered WARN
x86: Remove duplicate rtit status MSR macro
x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()
Linus Torvalds [Tue, 18 Oct 2016 16:57:12 +0000 (09:57 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixlet from Ingo Molnar:
"Remove an unused variable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Remove unused but set variable
Linus Torvalds [Tue, 18 Oct 2016 16:53:59 +0000 (09:53 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a crash that can trigger when racing with CPU hotplug: we didn't
use sched-domains data structures carefully enough in select_idle_cpu()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix sched domains NULL dereference in select_idle_sibling()
Linus Torvalds [Tue, 18 Oct 2016 16:30:18 +0000 (09:30 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU
driver fix/cleanup"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf jit: Fix build issue on Ubuntu
perf jevents: Handle events including .c and .o
perf/x86/intel: Remove an inconsistent NULL check
kprobes: Unpoison stack in jprobe_return() for KASAN
kprobes: Avoid false KASAN reports during stack copy
perf header: Set nr_numa_nodes only when we parsed all the data
perf top: Fix refreshing hierarchy entries on TUI
Linus Torvalds [Tue, 18 Oct 2016 16:04:17 +0000 (09:04 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Two fixes:
- a file locks fix (missing critical section, bug introduced in this
merge window)
- an x86 down_write() stack frame annotation"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking, fs/locks: Add missing file_sem locks
locking/rwsem/x86: Add stack frame dependency for ____down_write()
Linus Torvalds [Tue, 18 Oct 2016 16:01:22 +0000 (09:01 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Three irqchip driver fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gicv3: Handle loop timeout proper
irqchip/jcore: Fix lost per-cpu interrupts
irqchip/eznps: Acknowledge NPS_IPI before calling the handler
Linus Torvalds [Tue, 18 Oct 2016 15:35:07 +0000 (08:35 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull misc fixes from Ingo Molnar:
"A CPU hotplug debuggability fix and three objtool false positive
warnings fixes for new GCC6 code generation patterns"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Use distinct name for cpu_hotplug.dep_map
objtool: Skip all "unreachable instruction" warnings for gcov kernels
objtool: Improve rare switch jump table pattern detection
objtool: Support '-mtune=atom' stack frame setup instruction
Linus Torvalds [Tue, 18 Oct 2016 15:28:08 +0000 (08:28 -0700)]
Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire fixlet from Stefan Richter:
"IEEE 1394 subsystem patch: catch an initialization error in the packet
sniffer nosy"
* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: do not ignore errors in ioremap_nocache()
Linus Torvalds [Tue, 18 Oct 2016 15:05:29 +0000 (08:05 -0700)]
Merge tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just had a couple of amdgpu fixes and one core fix I wanted to get out
early to fix some regressions.
I'm sure I'll have more stuff this week for -rc2"
* tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits)
drm: Print device information again in debugfs
drm/amd/powerplay: fix bug stop dpm can't work on Vi.
drm/amd/powerplay: notify smu no display by default.
drm/amdgpu/dpm: implement thermal sensor for CZ/ST
drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
drm/amdgpu: disable smu hw first on tear down
drm/amdgpu: fix amdgpu_need_full_reset (v2)
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amdgpu: potential NULL dereference in debugfs code
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: clarify UVD/VCE special handling for CG
drm/amd/amdgpu: enable clockgating only after late init
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
drm/amdgpu/gfx8: fix CGCG_CGLS handling
drm/radeon: fix modeset tear down code
...
Mika Westerberg [Mon, 10 Oct 2016 13:39:31 +0000 (16:39 +0300)]
pinctrl: intel: Only restore pins that are used by the driver
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend
to explicitly disable USB touchscreen interrupt. This is done to prevent
situation where the lid is closed the touchscreen is left functional.
The pinctrl driver (wrongly) assumes it owns all pins which are owned by
host and not locked down. It is perfectly fine for BIOS to use those pins
as it is also considered as host in this context.
What happens is that when the lid of Dell XPS 13 is closed, the BIOS
configures CPU_GP_1 low disabling the touchscreen interrupt. During resume
we restore all host owned pins to the known state which includes CPU_GP_1
and this overwrites what the BIOS has programmed there causing the
touchscreen to fail as no interrupts are reaching the CPU anymore.
Fix this by restoring only those pins we know are explicitly requested by
the kernel one way or other.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ville Syrjälä [Mon, 3 Oct 2016 14:56:55 +0000 (17:56 +0300)]
pinctrl: baytrail: Fix lockdep
Initialize the spinlock before using it.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.
1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014
0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000
0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002
ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0
Call Trace:
[<
ffffffff8133d597>] dump_stack+0x67/0x90
[<
ffffffff810cfb9e>] register_lock_class+0x52e/0x540
[<
ffffffff810d2081>] __lock_acquire+0x81/0x16b0
[<
ffffffff810cede1>] ? save_trace+0x41/0xd0
[<
ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0
[<
ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70
[<
ffffffff810d3b1a>] lock_acquire+0xba/0x220
[<
ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80
[<
ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60
[<
ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80
[<
ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80
[<
ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0
[<
ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70
[<
ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620
[<
ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0
...
Based on the diff it looks like the problem was introduced in
commit
71e6ca61e826 ("pinctrl: baytrail: Register pin control handling")
but I wasn't able to verify that empirically as the parent commit
just oopsed when I tried to boot it.
Cc: Cristina Ciocan <cristina.ciocan@intel.com>
Cc: stable@vger.kernel.org
Fixes:
71e6ca61e826 ("pinctrl: baytrail: Register pin control handling")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andrew Jeffery [Tue, 27 Sep 2016 14:50:16 +0000 (00:20 +0930)]
pinctrl: aspeed-g5: Fix pin association of SPI1 function
The SPI1 function was associated with the wrong pins: The functions that
those pins provide is either an SPI debug or passthrough function
coupled to SPI1. Make the SPI1 mux function configure the relevant pins
and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins
that were already defined.
The notation used in the datasheet's multi-function pin table for the SoC is
often creative: in this case the SYS* signals are enabled by a single bit,
which is nothing unusual on its own, but in this case the bit was also
participating in a multi-bit bitfield and therefore represented multiple
functions. This fact was overlooked in the original patch.
Fixes:
56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andrew Jeffery [Tue, 27 Sep 2016 14:50:15 +0000 (00:20 +0930)]
pinctrl: aspeed-g5: Fix GPIOE1 typo
This prevented C20 from successfully being muxed as GPIO.
Fixes:
56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andrew Jeffery [Tue, 27 Sep 2016 14:50:14 +0000 (00:20 +0930)]
pinctrl: aspeed-g5: Fix names of GPID2 pins
Fixes simple typos in the initial commit. There is no behavioural
change.
Fixes:
56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
Reported-by: Xo Wang <xow@google.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andrew Jeffery [Tue, 27 Sep 2016 14:50:13 +0000 (00:20 +0930)]
pinctrl: aspeed: "Not enabled" is a significant mux state
Consider a scenario with one pin P that has two signals A and B, where A
is defined to be higher priority than B: That is, if the mux IP is in a
state that would consider both A and B to be active on P, then A will be
the active signal.
To instead configure B as the active signal we must configure the mux so
that A is inactive. The mux state for signals can be described by
logical operations on one or more bits from one or more registers (a
"signal expression"), which in some cases leads to aliased mux states for
a particular signal. Further, signals described by multi-bit bitfields
often do not only need to record the states that would make them active
(the "enable" expressions), but also the states that makes them inactive
(the "disable" expressions). All of this combined leads to four possible
states for a signal:
1. A signal is active with respect to an "enable" expression
2. A signal is not active with respect to an "enable" expression
3. A signal is inactive with respect to a "disable" expression
4. A signal is not inactive with respect to a "disable" expression
In the case of P, if we are looking to activate B without explicitly
having configured A it's enough to consider A inactive if all of A's
"enable" signal expressions evaluate to "not active". If any evaluate to
"active" then the corresponding "disable" states must be applied so it
becomes inactive.
For example, on the AST2400 the pins composing GPIO bank H provide
signals ROMD8 through ROMD15 (high priority) and those for UART6 (low
priority). The mux states for ROMD8 through ROMD15 are aliased, i.e.
there are two mux states that result in the respective signals being
configured:
A. SCU90[6]=1
B. Strap[4,1:0]=100
Further, the second mux state is a 3-bit bitfield that explicitly
defines the enabled state but the disabled state is implicit, i.e. if
Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not
considered active. This requires the mux function evaluation logic to
use approach 2. above, however the existing code was using approach 3.
The problem was brought to light on the Palmetto machines where the
strap register value is 0x120ce416, and prevented GPIO requests in bank
H from succeeding despite the hardware being in a position to allow
them.
Fixes:
318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Peter Zijlstra [Sat, 8 Oct 2016 08:12:28 +0000 (10:12 +0200)]
locking, fs/locks: Add missing file_sem locks
I overlooked a few code-paths that can lead to
locks_delete_global_locks().
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bruce Fields <bfields@fieldses.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 13 Oct 2016 21:26:15 +0000 (16:26 -0500)]
locking/rwsem/x86: Add stack frame dependency for ____down_write()
Arnd reported the following objtool warning:
kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup
The warning means gcc placed the ____down_write() inline asm (and its
call instruction) before the frame pointer setup in
down_write_killable(), which breaks frame pointer convention and can
result in incorrect stack traces.
Force the stack frame to be created before the call instruction by
listing the stack pointer as an output operand in the inline asm
statement.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Junjie Mao [Mon, 17 Oct 2016 01:20:25 +0000 (09:20 +0800)]
btrfs: assign error values to the correct bio structs
Fixes:
4246a0b63bd8 ("block: add a bi_error field to struct bio")
Signed-off-by: Junjie Mao <junjie.mao@enight.me>
Acked-by: David Sterba <dsterba@suse.cz>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Mon, 17 Oct 2016 20:57:09 +0000 (13:57 -0700)]
x86, pkeys: remove cruft from never-merged syscalls
pkey_set() and pkey_get() were syscalls present in older versions
of the protection keys patches. The syscall number definitions
were inadvertently left in place. This patch removes them.
I did a git grep and verified that these are the last places in
the tree that these appear, save for the protection_keys.c tests
and Documentation. Those spots talk about functions called
pkey_get/set() which are wrappers for the direct PKRU
instructions, not the syscalls.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: mgorman@techsingularity.net
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Fixes:
f9afc6197e9bb ("x86: Wire up protection keys system calls")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Mon, 17 Oct 2016 15:18:15 +0000 (08:18 -0700)]
generic syscalls: kill cruft from removed pkey syscalls
pkey_set() and pkey_get() were syscalls present in older versions
of the protection keys patches. They were fully excised from the
x86 code, but some cruft was left in the generic syscall code. The
C++ comments were intended to help to make it more glaring to me to
fix them before actually submitting them. That technique worked,
but later than I would have liked.
I test-compiled this for arm64.
Fixes:
a60f7b69d92c0 ("generic syscalls: Wire up memory protection keys syscalls")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-arch@vger.kernel.org
Cc: mgorman@techsingularity.net
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Mon, 17 Oct 2016 14:49:16 +0000 (16:49 +0200)]
Merge tag 'perf-urgent-for-mingo-
20161017' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix handling of NUMA nodes in perf.data files (Jiri Olsa)
- Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim)
- Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard)
- Fix handling of events including .c and .o, that were being treated as
BPF scripts instead of vendor ones (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Anton Blanchard [Thu, 13 Oct 2016 02:20:43 +0000 (13:20 +1100)]
perf jit: Fix build issue on Ubuntu
When building on Ubuntu 16.04, I get the following error:
Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop.
The problem is that update-java-alternatives has multiple spaces between
fields, and cut treats each space as a new delimiter:
java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el
Fix this by using awk, which handles this fine.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 8 Oct 2016 04:16:25 +0000 (04:16 +0000)]
perf jevents: Handle events including .c and .o
This patch helps with Sukadev's vendor event tree where such events can happen.
>From Andi Kleen:
Any event including a .c/.o/.bpf currently triggers BPF compilation or loading
and then an error. This can happen for some Intel vendor events, which cannot
be used.
This patch fixes this problem by forbidding BPF file patch containing '{', '}'
and ',', make sure flex consumes the leading '{', instead of matching it using
a BPF file path.
Tested result:
$ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000
invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}'
Run 'perf list' for a list of valid events
(as expected, interperted as event)
$ perf stat -e 'aaa.c' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
(as expected, interpreted as BPF source)
$ perf stat -e 'aaa.ccc' -a -I 1000
invalid or unsupported event: 'aaa.ccc'
(as expected, interpreted as event)
$ perf stat -e '{aaa.c}' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
event syntax error: '{aaa.c}'
<SKIP>
(as expected, interpreted as BPF source)
$ perf stat -e '{cycles,aaa.c}' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
event syntax error: '{cycles,aaa.c}'
(as expected, interpreted as BPF source)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tobias Klauser [Mon, 17 Oct 2016 09:47:02 +0000 (11:47 +0200)]
alarmtimer: Remove unused but set variable
Remove the set but unused variable base in alarm_clock_get to fix the
following warning when building with 'W=1':
kernel/time/alarmtimer.c: In function ‘alarm_timer_create’:
kernel/time/alarmtimer.c:545:21: warning: variable ‘base’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20161017094702.10873-1-tklauser@distanz.ch
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Sun, 16 Oct 2016 16:17:05 +0000 (18:17 +0200)]
Merge branch 'mm/pkeys' into x86/urgent, to pick up pkeys fix
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Piotr Luc [Wed, 12 Oct 2016 18:27:58 +0000 (20:27 +0200)]
perf/x86/intel/uncore: Add Knights Mill CPUID
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161012182758.2925-1-piotr.luc@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Piotr Luc [Wed, 12 Oct 2016 18:27:25 +0000 (20:27 +0200)]
perf/x86/intel/rapl: Add Knights Mill CPUID
Add Knights Mill (KNM) to the list of CPUIDs supported by rapl.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161012182725.2701-1-piotr.luc@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Piotr Luc [Wed, 12 Oct 2016 18:26:34 +0000 (20:26 +0200)]
perf/x86/intel: Add Knights Mill CPUID
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161012182634.2462-1-piotr.luc@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Piotr Luc [Wed, 12 Oct 2016 18:05:20 +0000 (20:05 +0200)]
x86/cpu/intel: Add Knights Mill to Intel family
Add CPUID of Knights Mill (KNM) processor to Intel family list.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161012180520.30976-1-piotr.luc@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Vetter [Thu, 13 Oct 2016 14:13:44 +0000 (16:13 +0200)]
drm: Print device information again in debugfs
I was a bit over-eager in my cleanup in
commit
95c081c17f284de50eaca60d4d55643a64d39019
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jun 21 10:54:12 2016 +0200
drm: Move master pointer from drm_minor to drm_device
Noticed by Chris Wilson.
Fixes:
95c081c17f28 ("drm: Move master pointer from drm_minor to drm_device")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 16 Oct 2016 23:31:52 +0000 (09:31 +1000)]
Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
Fixes for radeon and amdgpu for 4.9:
- allow an additional reg in the SI reg checker
- fix thermal sensor readback on CZ/ST
- misc bug fixes
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amd/powerplay: fix bug stop dpm can't work on Vi.
drm/amd/powerplay: notify smu no display by default.
drm/amdgpu/dpm: implement thermal sensor for CZ/ST
drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
drm/amdgpu: disable smu hw first on tear down
drm/amdgpu: fix amdgpu_need_full_reset (v2)
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amdgpu: potential NULL dereference in debugfs code
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: clarify UVD/VCE special handling for CG
drm/amd/amdgpu: enable clockgating only after late init
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
drm/amdgpu/gfx8: fix CGCG_CGLS handling
drm/radeon: fix modeset tear down code
drm/radeon: fix up dp aux tear down (v2)
...
Dan Carpenter [Fri, 14 Oct 2016 07:29:08 +0000 (10:29 +0300)]
perf/x86/intel: Remove an inconsistent NULL check
Smatch complains that we don't check "event->ctx" consistently. It's
never NULL so we can just remove the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 16 Oct 2016 09:31:39 +0000 (11:31 +0200)]
Merge tag 'v4.9-rc1' into x86/urgent, to pick up updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan Williams [Wed, 12 Oct 2016 18:01:48 +0000 (11:01 -0700)]
x86/e820: Don't merge consecutive E820_PRAM ranges
Commit:
917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation")
... fixed up the broken manipulations of max_pfn in the presence of
E820_PRAM ranges.
However, it also broke the sanitize_e820_map() support for not merging
E820_PRAM ranges.
Re-introduce the enabling to keep resource boundaries between
consecutive defined ranges. Otherwise, for example, an environment that
boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0
device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhang Yi <yizhan@redhat.com>
Cc: linux-nvdimm@lists.01.org
Fixes:
917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation")
Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Joonas Lahtinen [Wed, 12 Oct 2016 10:18:56 +0000 (13:18 +0300)]
cpu/hotplug: Use distinct name for cpu_hotplug.dep_map
Use distinctive name for cpu_hotplug.dep_map to avoid the actual
cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gautham R . Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry Vyukov [Fri, 14 Oct 2016 14:07:23 +0000 (16:07 +0200)]
kprobes: Unpoison stack in jprobe_return() for KASAN
I observed false KSAN positives in the sctp code, when
sctp uses jprobe_return() in jsctp_sf_eat_sack().
The stray 0xf4 in shadow memory are stack redzones:
[ ] ==================================================================
[ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr
ffff88005e48f480
[ ] Read of size 1 by task syz-executor/18535
[ ] page:
ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0
[ ] flags: 0x1fffc0000000000()
[ ] page dumped because: kasan: bad access detected
[ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28
[ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ ]
ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8
[ ]
ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000
[ ]
ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370
[ ] Call Trace:
[ ] [<
ffffffff82d2b849>] dump_stack+0x12e/0x185
[ ] [<
ffffffff817d3169>] kasan_report+0x489/0x4b0
[ ] [<
ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20
[ ] [<
ffffffff82d49529>] memcmp+0xe9/0x150
[ ] [<
ffffffff82df7486>] depot_save_stack+0x176/0x5c0
[ ] [<
ffffffff817d2031>] save_stack+0xb1/0xd0
[ ] [<
ffffffff817d27f2>] kasan_slab_free+0x72/0xc0
[ ] [<
ffffffff817d05b8>] kfree+0xc8/0x2a0
[ ] [<
ffffffff85b03f19>] skb_free_head+0x79/0xb0
[ ] [<
ffffffff85b0900a>] skb_release_data+0x37a/0x420
[ ] [<
ffffffff85b090ff>] skb_release_all+0x4f/0x60
[ ] [<
ffffffff85b11348>] consume_skb+0x138/0x370
[ ] [<
ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180
[ ] [<
ffffffff8676ae88>] sctp_chunk_free+0x58/0x70
[ ] [<
ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0
[ ] [<
ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0
[ ] [<
ffffffff8677f2c1>] sctp_inq_push+0x131/0x190
[ ] [<
ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20
[ ... ]
[ ] Memory state around the buggy address:
[ ]
ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ]
ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] >
ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ^
[ ]
ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ]
ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ==================================================================
KASAN stack instrumentation poisons stack redzones on function entry
and unpoisons them on function exit. If a function exits abnormally
(e.g. with a longjmp like jprobe_return()), stack redzones are left
poisoned. Later this leads to random KASAN false reports.
Unpoison stack redzones in the frames we are going to jump over
before doing actual longjmp in jprobe_return().
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: kasan-dev@googlegroups.com
Cc: surovegin@google.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry Vyukov [Tue, 11 Oct 2016 12:13:38 +0000 (14:13 +0200)]
kprobes: Avoid false KASAN reports during stack copy
Kprobes save and restore raw stack chunks with memcpy().
With KASAN these chunks can contain poisoned stack redzones,
as the result memcpy() interceptor produces false
stack out-of-bounds reports.
Use __memcpy() instead of memcpy() for stack copying.
__memcpy() is not instrumented by KASAN and does not lead
to the false reports.
Currently there is a spew of KASAN reports during boot
if CONFIG_KPROBES_SANITY_TEST is enabled:
[ ] Kprobe smoke test: started
[ ] ==================================================================
[ ] BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0x17c/0x280 at addr
ffff88085259fba8
[ ] Read of size 64 by task swapper/0/1
[ ] page:
ffffea00214967c0 count:0 mapcount:0 mapping: (null) index:0x0
[ ] flags: 0x2fffff80000000()
[ ] page dumped because: kasan: bad access detected
[...]
Reported-by: CAI Qian <caiqian@redhat.com>
Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kasan-dev@googlegroups.com
[ Improved various details. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 13 Oct 2016 21:22:53 +0000 (16:22 -0500)]
objtool: Skip all "unreachable instruction" warnings for gcov kernels
Recently objtool has started reporting a few "unreachable instruction"
warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually
this warning means there's some new control flow that objtool doesn't
understand. But in this case, objtool is correct and the instructions
really are inaccessible. It's an annoying quirk of gcov, but it's
harmless, so it's ok to just silence the warnings.
With older versions of GCC, it was relatively easy to detect
gcov-specific instructions and to skip any unreachable warnings produced
by them. But GCC 6 has gotten craftier.
Instead of continuing to play whack-a-mole with gcov, just use a bigger,
more permanent hammer and disable unreachable warnings for the whole
file when gcov is enabled. This is fine to do because a) unreachable
warnings are usually of questionable value; and b) gcov isn't used for
production kernels and we can relax the checks a bit there.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 13 Oct 2016 21:22:52 +0000 (16:22 -0500)]
objtool: Improve rare switch jump table pattern detection
GCC 6 added a new switch statement jump table optimization which makes
objtool's life harder. It looks like:
mov [rodata addr],%reg1
... some instructions ...
jmpq *(%reg1,%reg2,8)
The optimization is quite rare, but objtool still needs to be able to
identify the pattern so that it can follow all possible control flow
paths related to the switch statement.
In order to detect the pattern, objtool starts from the indirect jump
and scans backwards through the function until it finds the first
instruction in the pattern. If it encounters an unconditional jump
along the way, it stops and considers the pattern to be not found.
As it turns out, unconditional jumps can happen, as long as they are
small forward jumps within the range being scanned.
This fixes the following warnings:
drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 15 Oct 2016 19:17:50 +0000 (12:17 -0700)]
Linux 4.9-rc1
Linus Torvalds [Sat, 15 Oct 2016 19:09:13 +0000 (12:09 -0700)]
Merge tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs
Pull befs fixes from Luis de Bethencourt:
"I recently took maintainership of the befs file system [0]. This is
the first time I send you a git pull request, so please let me know if
all the below is OK.
Salah Triki and myself have been cleaning the code and fixing a few
small bugs.
Sorry I couldn't send this sooner in the merge window, I was waiting
to have my GPG key signed by kernel members at ELCE in Berlin a few
days ago."
[0] https://lkml.org/lkml/2016/7/27/502
* tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits)
befs: befs: fix style issues in datastream.c
befs: improve documentation in datastream.c
befs: fix typos in datastream.c
befs: fix typos in btree.c
befs: fix style issues in super.c
befs: fix comment style
befs: add check for ag_shift in superblock
befs: dump inode_size superblock information
befs: remove unnecessary initialization
befs: fix typo in befs_sb_info
befs: add flags field to validate superblock state
befs: fix typo in befs_find_key
befs: remove unused BEFS_BT_PARMATCH
fs: befs: remove ret variable
fs: befs: remove in vain variable assignment
fs: befs: remove unnecessary *befs_sb variable
fs: befs: remove useless initialization to zero
fs: befs: remove in vain variable assignment
fs: befs: Insert NULL inode to dentry
fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect
...
Linus Torvalds [Sat, 15 Oct 2016 17:03:15 +0000 (10:03 -0700)]
Merge tag 'gcc-plugins-v4.9-rc1' of git://git./linux/kernel/git/kees/linux
Pull gcc plugins update from Kees Cook:
"This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot
time as possible, hoping to capitalize on any possible variation in
CPU operation (due to runtime data differences, hardware differences,
SMP ordering, thermal timing variation, cache behavior, etc).
At the very least, this plugin is a much more comprehensive example
for how to manipulate kernel code using the gcc plugin internals"
* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
latent_entropy: Mark functions with __latent_entropy
gcc-plugins: Add latent_entropy plugin
Linus Torvalds [Sat, 15 Oct 2016 16:26:12 +0000 (09:26 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main MIPS pull request for 4.9:
MIPS core arch code:
- traps: 64bit kernels should read CP0_EBase 64bit
- traps: Convert ebase to KSEG0
- c-r4k: Drop bc_wback_inv() from icache flush
- c-r4k: Split user/kernel flush_icache_range()
- cacheflush: Use __flush_icache_user_range()
- uprobes: Flush icache via kernel address
- KVM: Use __local_flush_icache_user_range()
- c-r4k: Fix flush_icache_range() for EVA
- Fix -mabi=64 build of vdso.lds
- VDSO: Drop duplicated -I*/-E* aflags
- tracing: move insn_has_delay_slot to a shared header
- tracing: disable uprobe/kprobe on compact branch instructions
- ptrace: Fix regs_return_value for kernel context
- Squash lines for simple wrapper functions
- Move identification of VP(E) into proc.c from smp-mt.c
- Add definitions of SYNC barrierstype values
- traps: Ensure full EBase is written
- tlb-r4k: If there are wired entries, don't use TLBINVF
- Sanitise coherentio semantics
- dma-default: Don't check hw_coherentio if device is non-coherent
- Support per-device DMA coherence
- Adjust MIPS64 CAC_BASE to reflect Config.K0
- Support generating Flattened Image Trees (.itb)
- generic: Introduce generic DT-based board support
- generic: Convert SEAD-3 to a generic board
- Enable hardened usercopy
- Don't specify STACKPROTECTOR in defconfigs
Octeon:
- Delete dead code and files across the platform.
- Change to use all memory into use by default.
- Rename upper case variables in setup code to lowercase.
- Delete legacy hack for broken bootloaders.
- Leave maintaining the link state to the actual ethernet/PHY drivers.
- Add DTS for D-Link DSR-500N.
- Fix PCI interrupt routing on D-Link DSR-500N.
Pistachio:
- Remove ANDROID_TIMED_OUTPUT from defconfig
TX39xx:
- Move GPIO setup from .mem_setup() to .arch_init()
- Convert to Common Clock Framework
TX49xx:
- Move GPIO setup from .mem_setup() to .arch_init()
- Convert to Common Clock Framework
txx9wdt:
- Add missing clock (un)prepare calls for CCF
BMIPS:
- Add PW, GPIO SDHCI and NAND device node names
- Support APPENDED_DTB
- Add missing bcm97435svmb to DT_NONE
- Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
- Add DT examples for BCM63268, BCM3368 and BCM6362
- Add support for BCM3368 and BCM6362
PCI
- Reduce stack frame usage
- Use struct list_head lists
- Support for CONFIG_PCI_DOMAINS_GENERIC
- Make pcibios_set_cache_line_size an initcall
- Inline pcibios_assign_all_busses
- Split pci.c into pci.c & pci-legacy.c
- Introduce CONFIG_PCI_DRIVERS_LEGACY
- Support generic drivers
CPC
- Convert bare 'unsigned' to 'unsigned int'
- Avoid lock when MIPS CM >= 3 is present
GIC:
- Delete unused file smp-gic.c
mt7620:
- Delete unnecessary assignment for the field "owner" from PCI
BCM63xx:
- Let clk_disable() return immediately if clk is NULL
pm-cps:
- Change FSB workaround to CPU blacklist
- Update comments on barrier instructions
- Use MIPS standard lightweight ordering barrier
- Use MIPS standard completion barrier
- Remove selection of sync types
- Add MIPSr6 CPU support
- Support CM3 changes to Coherence Enable Register
SMP:
- Wrap call to mips_cpc_lock_other in mips_cm_lock_other
- Introduce mechanism for freeing and allocating IPIs
cpuidle:
- cpuidle-cps: Enable use with MIPSr6 CPUs.
SEAD3:
- Rewrite to use DT and generic kernel feature.
USB:
- host: ehci-sead3: Remove SEAD-3 EHCI code
FBDEV:
- cobalt_lcdfb: Drop SEAD3 support
dt-bindings:
- Document a binding for simple ASCII LCDs
auxdisplay:
- img-ascii-lcd: driver for simple ASCII LCD displays
irqchip i8259:
- i8259: Add domain before mapping parent irq
- i8259: Allow platforms to override poll function
- i8259: Remove unused i8259A_irq_pending
Malta:
- Rewrite to use DT
of/platform:
- Probe "isa" busses by default
CM:
- Print CM error reports upon bus errors
Module:
- Migrate exception table users off module.h and onto extable.h
- Make various drivers explicitly non-modular:
- Audit and remove any unnecessary uses of module.h
mailmap:
- Canonicalize to Qais' current email address.
Documentation:
- MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
Loongson1C:
- Add CPU support for Loongson1C
- Add board support
- Add defconfig
- Add RTC support for Loongson1C board
All this except one Documentation fix has sat in linux-next and has
survived Imagination's automated build test system"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
MIPS: ptrace: Fix regs_return_value for kernel context
MIPS: VDSO: Drop duplicated -I*/-E* aflags
MIPS: Fix -mabi=64 build of vdso.lds
MIPS: Enable hardened usercopy
MIPS: generic: Convert SEAD-3 to a generic board
MIPS: generic: Introduce generic DT-based board support
MIPS: Support generating Flattened Image Trees (.itb)
MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
MIPS: Print CM error reports upon bus errors
MIPS: Support per-device DMA coherence
MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
MIPS: Sanitise coherentio semantics
MIPS: PCI: Support generic drivers
MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
MIPS: PCI: Inline pcibios_assign_all_busses
MIPS: PCI: Make pcibios_set_cache_line_size an initcall
MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
MIPS: PCI: Use struct list_head lists
...
Linus Torvalds [Sat, 15 Oct 2016 16:20:54 +0000 (09:20 -0700)]
Merge tag 'sound-fix-4.9-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few trivial small fixes"
* tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: line6: fix a crash in line6_hwdep_write()
ALSA: seq: fix passing wrong pointer in function call of compatibility layer
ALSA: hda - Fix a failure of micmute led when having multi adcs
ALSA: line6: Fix POD X3 Live audio input
Dave Jones [Fri, 14 Oct 2016 18:26:24 +0000 (14:26 -0400)]
pkeys: Remove easily triggered WARN
This easy-to-trigger warning shows up instantly when running
Trinity on a kernel with CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS disabled.
At most this should have been a printk, but the -EINVAL alone should be more
than adequate indicator that something isn't available.
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: torvalds@linux-foundation.org
Cc: akpm@linux-foundation.org
Cc: mgorman@techsingularity.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Sat, 15 Oct 2016 01:19:05 +0000 (18:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull more misc uaccess and vfs updates from Al Viro:
"The rest of the stuff from -next (more uaccess work) + assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
score: traps: Add missing include file to fix build error
fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
fs/super.c: fix race between freeze_super() and thaw_super()
overlayfs: Fix setting IOP_XATTR flag
iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
blackfin: no access_ok() for __copy_{to,from}_user()
arm64: don't zero in __copy_from_user{,_inatomic}
arm: don't zero in __copy_from_user_inatomic()/__copy_from_user()
arc: don't leak bits of kernel stack into coredump
alpha: get rid of tail-zeroing in __copy_user()
Linus Torvalds [Sat, 15 Oct 2016 00:47:31 +0000 (17:47 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Including:
- nine bug fixes for stable. Some of these we found at the recent two
weeks of SMB3 test events/plugfests.
- significant improvements in reconnection (e.g. if server or network
crashes) especially when mounted with "persistenthandles" or to
server which advertises Continuous Availability on the share.
- a new mount option "idsfromsid" which improves POSIX compatibility
in some cases (when winbind not configured e.g.) by better (and
faster) fetching uid/gid from acl (when "cifsacl" mount option is
enabled). NB: we are almost complete work on "cifsacl" (querying
mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is
not included in this set.
- improved handling for SMB3 "credits" (even if server is buggy)
Still working on two sets of changes:
- cifsacl enablement for SMB3
- cleanup of RFC1001 length calculation (so we can handle encryption
and multichannel and RDMA)
And a couple of new bugs were reported recently (unrelated to above)
so will probably have another merge request next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
CIFS: Retrieve uid and gid from special sid if enabled
CIFS: Add new mount option to set owner uid and gid from special sids in acl
CIFS: Reset read oplock to NONE if we have mandatory locks after reopen
CIFS: Fix persistent handles re-opening on reconnect
SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup
SMB2: Separate Kerberos authentication from SMB2_sess_setup
Expose cifs module parameters in sysfs
Cleanup missing frees on some ioctls
Enable previous version support
Do not send SMB3 SET_INFO request if nothing is changing
SMB3: Add mount parameter to allow user to override max credits
fs/cifs: reopen persistent handles on reconnect
Clarify locking of cifs file and tcon structures and make more granular
Fix regression which breaks DFS mounting
fs/cifs: keep guid when assigning fid to fileinfo
SMB3: GUIDs should be constructed as random but valid uuids
Set previous session id correctly on SMB3 reconnect
cifs: Limit the overall credit acquired
Display number of credits available
Add way to query creation time of file via cifs xattr
...
Linus Torvalds [Sat, 15 Oct 2016 00:44:56 +0000 (17:44 -0700)]
Merge branch 'for-linus-4.9' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Some fixes from Omar and Dave Sterba for our new free space tree.
This isn't heavily used yet, but as we move toward making it the new
default we wanted to nail down an endian bug"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: tests: uninline member definitions in free_space_extent
btrfs: tests: constify free space extent specs
Btrfs: expand free space tree sanity tests to catch endianness bug
Btrfs: fix extent buffer bitmap tests on big-endian systems
Btrfs: catch invalid free space trees
Btrfs: fix mount -o clear_cache,space_cache=v2
Btrfs: fix free space tree bitmaps on big-endian systems
Al Viro [Sat, 15 Oct 2016 00:42:44 +0000 (20:42 -0400)]
Merge branch 'work.uaccess' into for-linus
Guenter Roeck [Wed, 12 Oct 2016 20:42:23 +0000 (13:42 -0700)]
score: traps: Add missing include file to fix build error
score images fail to build as follows.
arch/score/kernel/traps.c: In function 'show_stack':
arch/score/kernel/traps.c:55:3: error:
implicit declaration of function '__get_user'
__get_user() is declared in asm/uaccess.h, which was previously included
through asm/module.h.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes:
88dd4a748da7 ("score: separate extable.h, switch module.h to it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log