drm: Automatically register/unregister all connectors

As the drm_connector is now safe for multiple calls to
register/unregister, automatically perform a registration on all known
connectors drm drv_register (and unregister from drm_drv_unregister).
Drivers can still call drm_connector_register() and
drm_connector_unregister() individually, or defer as required.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-2-git-send-email-chris@chris-wilson.co.uk

drm: Minimally initialise drm_dp_aux

When trying to split up the initialisation phase and the registration
phase, one immediate problem encountered is trying to use our own i2c
devices before registration with userspace (to read EDID during device
discovery). drm_dp_aux in particular only offers an interface for setting
up the device *after* we have exposed the connector via sysfs. In order
to break the chicken-and-egg problem, export drm_dp_aux_init() to
minimally prepare the i2c device for internal use before
drm_connector_register().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
[danvet: Amend kerneldoc slightly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-3-git-send-email-chris@chris-wilson.co.uk

drm: Pass the drm_dp_aux->hw_mutex to i2c for its locking

Rather than have both drm_dp_aux lock within its transfer, and i2c to
lock around the transfer, use the same lock by filling in the locking
callbacks that i2c wants to use. We require our own hw_mutex as we
bypass i2c_transfer for drm_dp_dpcd_access().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-2-git-send-email-chris@chris-wilson.co.uk

drm/sti: Don't call drm_helper_disable_unused_functions

Atomic drivers are supposed to do hw/sw state reset with the
drm_mode_config_reset() call right above it.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-38-git-send-email-daniel.vetter@ffwll.ch

drm: Automatically unregister the connector during cleanup

As we now can call drm_connector_unregister() multiple times, provide a
failsafe unregister for a connector when cleaning it up.

v2: Add a WARN to catch any connectors that are still visible to
userspace when we come to destoy them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-5-git-send-email-chris@chris-wilson.co.uk

drm: Make drm_connector_register() safe against multiple calls

Protect against drivers that may try to register the connector more
than once, or who try to unregister it multiple times.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-4-git-send-email-chris@chris-wilson.co.uk

drm: Add a callback from connector registering

If a driver wants to more precisely control its initialisation and in
particular, defer registering its interfaces with userspace until after
everything is setup, it also needs to defer registering the connectors.
As some devices need more work during registration, add a callback so
that drivers can do additional work if required for a connector.

Correspondingly, we also require an unregister callback.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: go ocd and remvoe unecessary empty kerneldoc line.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-3-git-send-email-chris@chris-wilson.co.uk

drm: Export drm_dev_init() for subclassing

In order to allow drivers to pack their privates and drm_device into one
struct (e.g. for subclassing), export the initialisation routines for
struct drm_device.

v2: Missed return ret. That error path had only one job to do!
v3: Cross-referencing drm_dev_init/drm_dev_alloc in kerneldoc, fix
missed error code for goto err_minors.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-2-git-send-email-chris@chris-wilson.co.uk

drm: rockchip: select DRM_GEM_CMA_HELPER

The rockchip drm driver started using drm_gem_cma_vm_ops, but that might
not be part of the kernel, causing the link to fail:

drivers/gpu/built-in.o:(.data+0xb234): undefined reference to `drm_gem_cma_vm_ops'

This adds a Kconfig 'select' statement to enable it like the other
user do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 80f67cd80add ("drm/rockchip: Use cma gem vm ops")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160616122800.1174015-1-arnd@arndb.de

drm: Extract drm_master_relase

Like with drm_master_open protect it with a check for primary_client
to make it clear that this can't happen on render/control nodes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-7-git-send-email-daniel.vetter@ffwll.ch

drm: Extract drm_master_open

And pull out the primary_client check to make it really obvious that
this can't happen on control/render nodes. Bonus that we can avoid the
master lock in this case.

v2: Don't leak locks on error path (and simplify control flow while
at it), reported by Julia.

Cc: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-6-git-send-email-daniel.vetter@ffwll.ch

drm: Move master functions into drm_auth.c

For modern drivers pretty much the only thing drm_master does is
handling authentication for the primary/legacy drm_minor node. Instead
of having it all over drm files, move it all together into drm_auth.c.

This patch just does code-motion, follow up patches will also extract
the master logic from file open&release paths.

Reviewed-by: Chris Wilson Mchris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-5-git-send-email-daniel.vetter@ffwll.ch

drm: Link directly from drm_master to drm_device

Master-based auth only exists for the legacy/primary drm_minor, hence
there can only be one per device. The goal here is to untangle the
epic dereference games of minor->master and master->minor which is
just massively confusing.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-4-git-send-email-daniel.vetter@ffwll.ch

drm: Hide hw.lock cleanup in filp->release better

A few things:
- Rename the cleanup function from drm_master_release to
  drm_legacy_lock_release. It doesn't relase any master stuff, but
  just the legacy hw lock.
- Hide it in drm_lock.c, which allows us to make a few more functions
  static in there. To avoid forward decl we need to shuffle the code a
  bit though.
- Push the check for ->master into the function itself.
- Only call this for !DRIVER_MODESET.

End result: Another place that takes struct_mutex gone for good for
modern drivers.

v2: Remove leftover comment.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-3-git-send-email-daniel.vetter@ffwll.ch

drm: Nuke legacy maps debugfs files

GEM stopped using those a while ago, and no one should ever
need to use them again to debug legacy horror show drivers.

Nuke it all. Aside: It would kinda be nice if we'd have some
generic debugfs dumps for at least kms ...

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-2-git-send-email-daniel.vetter@ffwll.ch

Merge tag 'topic/drm-misc-2016-06-15' of git://anongit.freedesktop.org/drm-intel into drm-next

- best_encoder cleanup from Boris.
- drm_simple_display_pipe helpers from Noralf. Looks really neat imo, and
  there's 2-3 in-flight drivers which look like they could/should use it.
  Anyway, with this we have now helpers and everything in place to write
  drivers for simple hw with fewer complexity in the driver than what
  fbdev would need. That was the last complaint I've heard from embedded
  folks after we made atomic happen. Mission accomplished!
- nonblocking commit helpers for atomic, plus a bunch of driver patches
  for that.
- Prep patch from Laurent for cleaned up pixel format functions.
- More of Gustavo's cleanup for drm vblank functions.
- and a few oddball things in between

Plus the merge of docs-next to prep the docbook->sphinx conversion as
discussed. Jon cc'ed as fyi.

* tag 'topic/drm-misc-2016-06-15' of git://anongit.freedesktop.org/drm-intel: (108 commits)
  drm/atomic-helpers: Clear up cleanup_done a bit
  drm/atomic-helpers: Stall on the right commit
  drm/vmwgfx: use *_32_bits() macros
  drm/virtio: Don't reinvent a flipping wheel
  drm/i915: Fix missing unlock on error in i915_ppgtt_info()
  drm/gma500: use drm_crtc_vblank_{on,off}()
  drm/radeon: use crtc directly in drm_crtc_vblank_put()
  drm/amdgpu: use crtc directly in drm_crtc_vblank_put()
  drm/radeon: use drm_crtc_vblank_{on,off}()
  drm/amdgpu: use drm_crtc_vblank_{on,off}()
  drm: make drm_vblank_{get,put}() static
  drm: remove legacy drm_arm_vblank_event()
  drm: remove legacy drm_send_vblank_event()
  drm/nouveau: replace legacy vblank helpers
  drm/prime: fix error path deadlock fail
  drm/dsi: Add uevent callback
  drm: fb: cma: fix memory leak
  drm: i915: Rely on the default ->best_encoder() behavior where appropriate
  drm: Add helper for simple display pipeline
  drm/bridge: dw-hdmi: Use drm_atomic_helper_best_encoder()
  ...

drm/atomic-helpers: Clear up cleanup_done a bit

It's not obvious at first sight that this is a fastpath, make that
clearer with a goto. Fallout from a discussion with Liviu on irc.

v2: Drop bogus hunks that crept in.

v3: Make it compile.

Cc: Liviu.Dudau@arm.com
Acked-by: Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465986266-2831-1-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helpers: Stall on the right commit

stall_checks carefully picked out the right commit to stall on, then
promptly used the wrong variable. Due to the break in the next loop
iteration this could be the 3rd commit, or if the list only has 2
entries commit would now point into the struct drm_crtc itself, at
some offset. Hilarity eventually ensues.

For added safety, also break right away instead of iterating once
more, but the real fix is waiting on stall_commit instead of commit.

Reported-and-tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465926658-10110-1-git-send-email-daniel.vetter@ffwll.ch

drm/vmwgfx: use *_32_bits() macros

Use the upper_32_bits() macro instead of the four line equivalent that
triggers a GCC warning on 32 bits x86:
    drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c: In function 'vmw_cmdbuf_header_submit':
    drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c:297:25: warning: right shift count >= width of type [-Wshift-count-overflow]
       val = (header->handle >> 32);
                             ^

And use the lower_32_bits() macro instead of and-ing with a 32 bits
mask.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457000770-2317-1-git-send-email-pebolle@tiscali.nl

Merge tag 'sphinx-4.8' of git://git.lwn.net/linux into topic/drm-misc

Stable tag for sphinx work

Pull current state of the sphinx rework from Jonathan into drm-misc so
that we can start converting gpu.tmpl.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/virtio: Don't reinvent a flipping wheel

Now that the core helpers support nonblocking atomic commits there's
no need to invent that wheel separately (instead of fixing the bug in
the atomic implementation of virtio, as it should have been done!).

v2: Rebased on top of

commit e7cf0963f816fa44190caaf51aeffaa614c340c6
Author: Gerd Hoffmann <kraxel@redhat.com>
Date:   Tue May 31 08:50:47 2016 +0200

virtio-gpu: add atomic_commit function

Cc: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465510073-20951-1-git-send-email-daniel.vetter@ffwll.ch

drm/i915: Fix missing unlock on error in i915_ppgtt_info()

Add the missing unlock before return from function i915_ppgtt_info()
in the error handling case.

Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com

Merge branch 'topic-arcpgu-sim' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next

Add support for arcgpu on the sim platform.

* 'topic-arcpgu-sim' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platforms
  ARCv2: [vdk] Enable ARC PGU on HS38 VDK
  drm/arcpgu: Make ARC PGU usable on simulation platforms

drm/gma500: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-7-git-send-email-gustavo@padovan.org

drm/radeon: use crtc directly in drm_crtc_vblank_put()

We don't need to use &radeon_crtc->base there as crtc is available
in the function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-10-git-send-email-gustavo@padovan.org

drm/amdgpu: use crtc directly in drm_crtc_vblank_put()

We don't need to use &amdgpu_crtc->base there as crtc is available
in the function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-9-git-send-email-gustavo@padovan.org

drm/radeon: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-8-git-send-email-gustavo@padovan.org

drm/amdgpu: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-6-git-send-email-gustavo@padovan.org

drm: make drm_vblank_{get,put}() static

As they are not used anywhere outside drm_irq.c make them static.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-4-git-send-email-gustavo@padovan.org

drm: remove legacy drm_arm_vblank_event()

We don't have any user of this function anymore, let's remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-3-git-send-email-gustavo@padovan.org

drm: remove legacy drm_send_vblank_event()

We don't have any user of this function anymore, let's remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-2-git-send-email-gustavo@padovan.org

drm/nouveau: replace legacy vblank helpers

Replace the legacy drm_send_vblank_event(), drm_arm_vblank_event() and
drm_vblank_{get,put}() with the new helper functions.

v2: add crtc to nouveau_page_flip_state (comment from Mario Kleiner)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-1-git-send-email-gustavo@padovan.org

ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platforms

With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in nSIM OSCI virtual platforms
with modern Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

ARCv2: [vdk] Enable ARC PGU on HS38 VDK

With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in HS38 VDK with modern
Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

drm/arcpgu: Make ARC PGU usable on simulation platforms

In case of simulation there's no real encoder/transmitter device
because in the model's virtual LCD  we're rendering whatever
appears in frame-buffer memory.

Signed-off-by: Ruud Derwig <rderwig@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/prime: fix error path deadlock fail

There were a couple messed up things about this fail path.
(1) it would drop object_name_lock twice
(2) drm_gem_handle_delete() (in drm_gem_remove_prime_handles())
    needs to grab prime_lock

Reported-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465500559-17873-1-git-send-email-robdclark@gmail.com

drm/dsi: Add uevent callback

Implement a uevent callback for devices on the MIPI DSI bus. This
callback will append MODALIAS information to the uevent and allow
modules to be loaded when devices are added to the bus.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm: fb: cma: fix memory leak

We may have a situation that the memory allocation for fbdefio fails
and then the allocation for fbops may succeed as some memory has been
freed somewhere. Lets free fbops also to face these rare situtation.
Since kfree can handle arguments as NULL, there should not be any
problem in calling both the kfree().

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Fixes: 199c77179c87 ("drm/fb-cma-helper: Add fb_deferred_io support")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465743836-6228-1-git-send-email-sudipm.mukherjee@gmail.com

drm: i915: Rely on the default ->best_encoder() behavior where appropriate

For all outputs except dp_mst, we have a 1:1 relationship between
connectors and encoders and the driver is relying on the atomic helpers:
we can drop the custom ->best_encoder() implementation and let the core
call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-7-git-send-email-boris.brezillon@free-electrons.com

drm: Add helper for simple display pipeline

Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.

Changes since v4:
- Remove drm_connector_register() call
- Forgot to assign pipe->connector

Changes since v3:
- (struct drm_simple_display_pipe *)->funcs should be const

Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation

Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
  "This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()

Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465570559-14238-1-git-send-email-noralf@tronnes.org

drm/bridge: dw-hdmi: Use drm_atomic_helper_best_encoder()

We have a 1:1 relationship between connectors and encoders, which means
we can rely on the drm_atomic_helper_best_encoder() behavior.

We still have to explicitly assign ->best_encoder() to
drm_atomic_helper_best_encoder(), because the automated fallback to
drm_atomic_helper_best_encoder() when ->best_encoder() is NULL is only
available when the DRM device is using the atomic helpers, and this bridge
is compatible with non-atomic and atomic devices.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-21-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: ps8622: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-20-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: ptn3460: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-19-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: anx78xx: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-18-git-send-email-boris.brezillon@free-electrons.com

drm: omap: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-17-git-send-email-boris.brezillon@free-electrons.com

drm: virtgpu: Rely on the default ->best_encoder() behavior

The virtgpu output exposes a 1:1 relationship between connectors and
encoders and the driver is relying on the atomic helpers: we can drop
the custom ->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-16-git-send-email-boris.brezillon@free-electrons.com

drm: vc4: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders and
the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-15-git-send-email-boris.brezillon@free-electrons.com

drm: tegra: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-14-git-send-email-boris.brezillon@free-electrons.com

drm: sun4i: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-13-git-send-email-boris.brezillon@free-electrons.com

drm: rockchip: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations  and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-11-git-send-email-boris.brezillon@free-electrons.com
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-12-git-send-email-boris.brezillon@free-electrons.com

drm: rcar-du: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders,
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-10-git-send-email-boris.brezillon@free-electrons.com

drm: fsl-dcu: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-6-git-send-email-boris.brezillon@free-electrons.com

drm: exynos: Rely on the default ->best_encoder() behavior

We have 1:1 relationship between connectors and encoders and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder()
implementations and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com

drm: atmel-hlcdc: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-4-git-send-email-boris.brezillon@free-electrons.com

drm: arc: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder(), and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-3-git-send-email-boris.brezillon@free-electrons.com

drm: Fix comment making reference to non-existing function

Documentation for drm_atomic_crtc_for_each_plane() makes reference to
a function called drm_crtc_for_each_pending_plane(). I've guessed that
the actual function name is drm_atomic_crtc_state_for_each_plane() as
that matches best the intent of the comment.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465571005-3877-1-git-send-email-Liviu.Dudau@arm.com

drm/rockchip: Resume DP early

The DP needs to have resumed once the DRM driver calls
drm_atomic_helper_resume, otherwise the DP clock is still disabled when
the DRM core enables the DP bridge.

Would be nice to use device_pm_wait_for_dev to synchronize these
devices, but the DRM device doesn't know what specific implementation
this bridge has.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Caesar Wang <wxt@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224813-7359-2-git-send-email-tomeu.vizoso@collabora.com

drm/rockchip: Use atomic PM helpers

This driver was still using the old legacy helpers and that caused a few
NULL dereferences when trying to call empty callbacks.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Caesar Wang <wxt@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224813-7359-1-git-send-email-tomeu.vizoso@collabora.com

drm/rockchip: Nuke pending event handling in preclose

This is now handled by the core, drivers can totally ignore lifetime
issues of drm events.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-11-git-send-email-daniel.vetter@ffwll.ch

drm/rockchip: convert to helper nonblocking atomic commit

With the various bits fixed rockchip now has an atomic compliant
handling/signalling of crtc_state->event, which means we can just
switch over to the new nonblocking helpers and remove some code.

v2: Fixes from Tomeu.

v3: Send out vblank events correctly when shutting down a crtc for
good. This is part of the atomic interface contract.

v4: Properly protect vop->event.

v5: Add more WARN_ON to check vop->event isn't clobbered.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/rockchip: Fix crtc_state->event signalling

It's not permissible to look at plane->state from interrupt context,
since doing that would need the irq handler to acquire the
plane->mutex lock.

The other problem is that if we pipeline updates using the new
nonblocking atomic helpers new state gets commit before the irq
handler fires, resulting in a lost event.

Fix both issues by caching the necessary values in vop_win, protected
by dev->event_lock.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-19-git-send-email-daniel.vetter@ffwll.ch

drm/rockchip: Disarm vop->is_enabled

With atomic helpers there's no need to track the enabled state of a pipe
any more, because atomic helpers track this accurately already.

Just disable the early returns, since the debug checks might be useful.

v2: Don't call drm_helper_disable_unused_functions, it blows up
without this check. At least explains why rockchip still needed this
old legacy-style state tracing - to work around issues from calling
other legacy style functions!

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-18-git-send-email-daniel.vetter@ffwll.ch

drm/hdlcd: Use helper support for nonblocking commits

With the fixed up drm event handling for crtc_state->event we can just
use the helper support for nonblocking commits.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-12-git-send-email-daniel.vetter@ffwll.ch

drm/arc: Implement nonblocking commit correctly

Committing with block it is not.

Thanks to the fixed up vblank event handling we can just use the
helper support for nonblocking commits now.

Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-11-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helper: nonblocking commit support

Design ideas:

- split up the actual commit into different phases, and have
  completions for each of them. This will be useful for the future
  when we want to interleave phases much more aggressively, for e.g.
  queue depth > 1. For not it's just a minimal optimization compared
  to current common nonblocking implementation patterns from drivers,
  which all stall for the entire commit to complete, including vblank
  waits and cleanups.

- Extract a separate atomic_commit_hw hook since that's the part most
  drivers will need to overwrite, hopefully allowing even more shared
  code.

- Enforce EBUSY seamntics by attaching one of the completions to the
  flip_done vblank event. Side benefit of forcing atomic drivers using
  these helpers to implement event handlign at least semi-correct. I'm
  evil that way ;-)

- Ridiculously modular, as usual.

- The main tracking unit for a commit stays struct drm_atomic_state,
  and the ownership rules for that are unchanged. Ownership still
  gets transferred to the driver (and subsequently to the worker) on
  successful commits. What is added is a small, per-crtc, refcounted
  structure to track pending commits called struct drm_crtc_commit.
  No actual state is attached to that though, it's purely for ordering
  and waiting.

- Dependencies are implicitly handled by assuming that any CRTC part
  of &drm_atomic_state is a dependency, and that the current commit
  must wait for any commits to complete on those CRTC. This way
  drivers can easily add more depencies using
  drm_atomic_get_crtc_state(), which is very natural since in most
  case a dependency exists iff there's some bit of state that needs to
  be cross checked.

  Removing depencies is not possible, drivers simply need to be
  careful to not include every CRTC in a commit if that's not
  necessary. Which is a good idea anyway, since that also avoids
  ww_mutex lock contention.

- Queue depth > 1 sees some prep work in this patch by adding a stall
  paramater to drm_atomic_helper_swap_states(). To be able to push
  commits entirely free-standing and in a deeper queue through the
  back-end the driver must not access any obj->state pointers. This
  means we need to track the old state in drm_atomic_state (much
  easier with the consolidated arrays), and pass them all explicitly
  to driver backends (this will be serious amounts of churn).

  Once that's done stall can be set to false in swap_states.

v2: Dont ask for flip_done signalling when the CRTC is off and stays
off: Drivers don't handle events in that case. Instead complete right
away. This way future commits don't need to have special-case logic,
but can keep blocking for the flip_done completion.

v3: Tons of fixes:
- Stall for preceeding commit for real, not the current one by
  accident.
- Add WARN_ON in case drivers don't fire the drm event.
- Don't double-free drm events.

v4: Make legacy cursor not stall.

v5: Extend the helper hook to cover the entire commit tail. Some
drivers need special code for cleanup and vblank waiting, this makes
it a bit more useful. Inspired by the rockchip driver.

v6: Add WARN_ON to catch drivers who forget to send out the
drm event.

v7: Fixup the stalls in swap_state for real!!

v8:
- Fixup trailing whitespace, spotted by Maarten.
- Actually wait for flip_done in cleanup_done, like the comment says
  we should do. Thanks a lot for Tomeu for helping with debugging this
  on.

v9: Now with awesome kerneldoc!

v10: Split out drm_crtc_commit tracking infrastructure.

v:
- Add missing static (Gustavo).
- Split out the sync functions, only do the actual nonblocking
  logic in this patch (Maarten).

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: igt/kms_flip/*
Testcase: igt/kms_cursor*
Testcase: igt/kms*plane*
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-10-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helper: roll out commit synchronization

To facilitate easier reviewing this is split out from the overall
nonblocking commit rework. It just rolls out the helper functions
and uses them in the main drm_atomic_helper_commit() function
to make it clear where in the flow they're used.

The next patch will actually split drm_atomic_helper_commit() into
2 pieces, with the tail being run asynchronously from a worker.

v2: Improve kerneldocs (Maarten).

v3: Don't convert ERESTARTSYS to EINTR (Maarten). Also don't fail if
the wait succeed in stall_check - we need to convert that case (it
returns the remaining jiffies) to 0 for success.

v4: Switch to long for wait_for_completion_timeout return value
everywhere (Maarten).

v5: Fix miscaped function in kerneldoc (Maarten).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465398936-22305-1-git-send-email-daniel.vetter@ffwll.ch

drm/atomic: Add struct drm_crtc_commit to track async updates

Split out from my big nonblocking atomic commit helper code as prep
work. While add it, also add some neat asciiart to document how it's
supposed to be used.

v2: Resurrect misplaced hunk in the kerneldoc.

v3: Wording improvements from Liviu.

Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-8-git-send-email-daniel.vetter@ffwll.ch

drm/sun4i: Implement some semblance of vblank event handling

atomic_flush seems to be the right place, right after we commit the
plane updates. Again use the fullproof version, since the pipe might
be off.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-6-git-send-email-daniel.vetter@ffwll.ch

drm/arc: Actually bother with handling atomic events.

The drm core has a nice ready-made helper for exactly the simple case
where it should fire on the next vblank.

Note that arming the vblank event in _begin is probably too early, and
might easily result in the vblank firing too early, before the new set
of planes are actually disabled. But that's kinda a minor issue
compared to just outright hanging userspace.

v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.

v3: Just unconditionally send out the event directly, for safety -
arcpgu doesn't even have vblank support ...

Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-3-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-4-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helper: Massage swap_state signature somewhat

- dev is redundant, we have state->atomic
- add stall parameter, which must be set when swapping needs to stall
  for preceeding commits to stop looking at ->state pointers. Currently
  all drivers need this to be, just prep work for a glorious future.

v2: Rebased on top of

commit e7cf0963f816fa44190caaf51aeffaa614c340c6
Author: Gerd Hoffmann <kraxel@redhat.com>
Date:   Tue May 31 08:50:47 2016 +0200

    virtio-gpu: add atomic_commit function

Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch

drm/rockchip: Drop drm_driver.load/unload callbacks

They are deprecated and by moving their implementations to bind/unbind
we can call drm_connector_register_all instead of open-coding it.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465557253-10670-1-git-send-email-tomeu.vizoso@collabora.com

drm/rockchip: fix compile warnings for 64-bit

Rockchip DRM does not yet build properly for ARM64, but we might as well
get the printf formatting correct now, to avoid the following warnings:

drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c: In function 'rockchip_drm_fbdev_create':
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:111:2: warning: format '%d' expects argument of type 'int', but argument 8 has type 'size_t' [-Wformat=]
  DRM_DEBUG_KMS("FB [%dx%d]-%d kvaddr=%p offset=%ld size=%d\n",
  ^

drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function 'rockchip_gem_alloc_buf':
drivers/gpu/drm/rockchip/rockchip_drm_gem.c:41:3: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'size_t' [-Wformat=]
   DRM_ERROR("failed to allocate %#x byte dma buffer", obj->size);
   ^

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465494392-92489-1-git-send-email-briannorris@chromium.org

drm/exynos: use logical AND in exynos_drm_plane_check_size()

The current bitwise AND should result in the same assembler
but this is what the code is actually supposed to do.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464179407-9004-1-git-send-email-tjakobi@math.uni-bielefeld.de

docs: kernel-doc: Add "example" and "note" to the magic section types

Lots of kerneldoc entries use "example:" or "note:" as section headers.
Until such a time as we can make them use proper markup, make them work as
intended.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: self-protection: rename "leak" to "exposure"

The meaning of "leak" can be both "untracked resource allocation" and
"memory content disclosure". This document's use was entirely of the
latter meaning, so avoid the confusion by using the Common Weakness
Enumeration name for this: Information Exposure (CWE-200). Additionally
adds a section on structure randomization.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge branch 'sphinx-for-docs-next' into doc/4.8

Jani Nikula says:

Jon, this is v2 of [1] and [2], with a considerable amount of polish and
fixes added. We started dogfooding this within drm-intel, and Daniel has
reviewed the lot and contributed a number of fixes, most notably
accurate file and line number references from Sphinx build
errors/warnings to the kernel-doc comments in source code.

We believe this is now in good shape for merging for v4.8. It's all in
my sphinx-for-docs-next branch that you've already looked at; pull
details below.

When this lands in docs-next and we can backmerge to drm, we'll plunge
ahead and convert gpu.tmpl to rst, and have that ready for v4.8. We
think it's best to contribute that via the drm tree, as it'll involve
splitting up the documentation and likely numerous updates to kernel-doc
comments.

I plan to update Documentation/kernel-doc-nano-HOWTO.txt for Sphinx and
rst, obviously converting it to rst while at it.

drm: Move format-related helpers to drm_fourcc.c

The drm_crtc.c file is a mess, making the ABI documentation confusing
since all functions are in the same bag. Split the format-related
helpers to a new drm_fourcc.c file.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465466048-2020-1-git-send-email-laurent.pinchart@ideasonboard.com

drm/atomic: kerneldoc for drm_atomic_crtc_needs_modeset

Just a bit of drive-by ocd.

v2: Improve per Liviu's feedback.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-7-git-send-email-daniel.vetter@ffwll.ch

drm/hisilicon: Implement some semblance of vblank event handling

atomic_flush seems to be the right place, but I'm not entirely sure
whether this will catch them all. It could be that when disabling the
crtc we'll miss the vblank.

While at it nuke the dummy functions.

v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-5-git-send-email-daniel.vetter@ffwll.ch

drm/fsl-du: Implement some semblance of vblank event handling

No idea how exactly fsl-du commits hw state changes, but here in flush
is probably the safest place.

While at it nuke the dummy functions.

v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.

Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-4-git-send-email-daniel.vetter@ffwll.ch

drm/arc: Nuke event_list

This is just used for cleanup in preclose, and with the reworked event
handling code this is now done properly by the core.

Nuke it!

But it also shows that arc totally fails at sending out drm events for
flips. Next patch will hack that up.

v2: Rebase it!

Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch

drm: Replace fb_helper->atomic with mode_config->atomic_commit

Drivers transitioning to atomic might not yet want to enable full
DRIVER_ATOMIC support when it's not entirely working. But using atomic
internally makes a lot more sense earlier.

Instead of spreading such flags to more places I figured it's simpler
to just check for mode_config->funcs->atomic_commit, and use atomic
paths if that is set. For the only driver currently transitioning
(i915) this does the right thing.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-23-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helper: Annotate a bunch more RETURNS: sections

kernel-doc wants a : at the end.

Acked-by: jani.nikula@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-27-git-send-email-daniel.vetter@ffwll.ch

drm: sti: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-12-git-send-email-boris.brezillon@free-electrons.com

drm: msm: Rely on the default ->best_encoder() behavior where appropriate

For all outputs except DSI we have a 1:1 relationship between connectors
and encoders and the driver is relying on the atomic helpers: we can
drop the custom ->best_encoder() and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-9-git-send-email-boris.brezillon@free-electrons.com

drm: mediatek: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-8-git-send-email-boris.brezillon@free-electrons.com

drm: Remove dev_pm_ops from drm_class

The PM core introduced the ability to keep devices runtime suspended
during the entire system suspend/resume process with commit aae4518b3124
("PM / sleep: Mechanism to avoid resuming runtime-suspended devices
unnecessarily"). Before this so-called "direct-complete" procedure was
introduced, devices were always runtime resumed only to be immediately
put to sleep again using their ->suspend hook. Direct-complete is
enabled by returning a positive value from the ->prepare hook. The PCI
core usually does this automatically.

Direct-complete is only available for a device if all children use it as
well. Currently we cannot support direct-complete for DRM drivers
because the DRM core automatically registers multiple DRM minors which
belong to device class drm_class, and drm_class uses a struct dev_pm_ops
which lacks the ->prepare callback.

While this could be solved by adding the missing ->prepare callback,
closer inspection shows that there are no DRM drivers left which declare
the legacy ->suspend and ->resume callbacks in their drm_driver struct.
The last ones to remove them were i915 with commit 1751fcf9f92e
("drm/i915: Fix module initialisation, v2.") and exynos with commit
e7fefb1d5af5 ("drm/exynos: remove legacy ->suspend()/resume()").

Consequently the struct dev_pm_ops of drm_class is now dead code. Remove
it. If no dev_pm_ops is declared for a device, the PM core automatically
enables direct-complete for it, thereby making that mechanism available
to the parent DRM PCI devices.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/da848fcd5ca72a35d9a722e644719977a47bb7ba.1465382836.git.lukas@wunner.de

Merge tag 'omapdrm-4.8' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 4.8

* Update MAINTAINERS file for omapdrm and tilcdc
* PLL refactoring to allow versatile use of the PLL clocks
* Public omapdss header refactoring to separate omapfb and omapdrm
* Gamma table support
* Support reset GPIO and vcc regulator in omapdrm's panel-dpi
* Minor cleanups

* tag 'omapdrm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits)
  drm/omapdrm: Implement gamma_lut atomic crtc properties
  drm/omapdrm: Workaround for errata i734 (LCD1 Gamma) in DSS dispc
  drm/omapdrm: Add gamma table support to DSS dispc
  drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt()
  drm/omap: rename panel/encoder Kconfig names
  drm: omapdrm: add DSI mapping
  drm: omapdrm: Remove unused omap_framebuffer_bo function
  drm: omapdrm: Remove unused omap_gem_tiled_size function
  drm: omapdrm: panel-lgphilips-lb035q02: Remove unused backlight GPIO
  drm/omap: panel-dpi: implement support for a vcc regulator
  drm/omap: panel-dpi: make (limited) use of a reset gpio
  devicetree/bindings: add reset-gpios and vcc-supply for panel-dpi
  MAINTAINERS: Add maintainer for TI LCDC DRM driver
  MAINTAINERS: Add maintainer for OMAP DRM driver
  drm/omap: fix pitch round-up
  drm/omap: remove align_pitch()
  drm/omap: remove unnecessary pitch round-up
  drm/omap: remove unneeded gpio includes
  drm/omap: Remove the video/omapdss.h and move it's content to local header file
  [media] omap_vout: Switch to use the video/omapfb_dss.h header file
  ...

Merge branch 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux into drm-next

Virtio-gpu updates

* 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux:
  virtio-gpu: use src not crtc
  virtio-gpu: pick up hotspot from framebuffer
  add cursor hotspot to drm_framebuffer
  virtio-gpu: switch to atomic cursor interfaces
  virtio-gpu: add atomic_commit function
  virtio-gpu: fix output lookup

Merge tag 'drm-intel-next-2016-06-06' of git://anongit.freedesktop.org/drm-intel into drm-next

- some polish for the guc code (Dave Gordon)
- big refactoring of gen9 display clock handling code (Ville)
- refactoring work in the context code (Chris Wilson)
- give encoder/crtc/planes useful names for debug output (Ville)
- improvements to skl/kbl wm computation code (Mahesh Kumar)
- bunch of smaller improvements all over as usual

* tag 'drm-intel-next-2016-06-06' of git://anongit.freedesktop.org/drm-intel: (64 commits)
  drm/i915: Update DRIVER_DATE to 20160606
  drm/i915: Extract physical display dimensions from VBT
  drm/i915: Silence "unexpected child device config size" for VBT on 845g
  drm/i915/skl+: Use scaling amount for plane data rate calculation (v4)
  drm/i915/skl+: calculate plane pixel rate (v4)
  drm/i915/skl+: calculate ddb minimum allocation (v6)
  drm/i915: Don't try to calculate relative data rates during hw readout
  drm/i915: Only ignore eDP ports that are connected
  drm/i915: Update GEN6_PMINTRMSK setup with GuC enabled
  drm/i915: kill STANDARD/CURSOR plane screams
  drm/i915: Give encoders useful names
  drm/i915: Give meaningful names to all the planes
  drm/i915: Don't leak primary/cursor planes on crtc init failure
  drm/i915: Set crtc->name to "pipe A", "pipe B", etc.
  drm/i915: Use plane->name in debug prints
  drm/i915: Use crtc->name in debug messages
  drm/i915: Reject modeset if the dotclock is too high
  drm/i915: Fix NULL pointer deference when out of PLLs in IVB
  drm/i915/ilk: Don't disable SSC source if it's in use
  drm/i915/bxt: Sanitize CDCLK to fix breakage during S4 resume
  ...

Merge tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel into drm-next

As promised, piles of prep work all around:
- drm_atomic_state rework, prep for nonblocking commit helpers
- fence patches from Gustavo and Christian to prep for atomic fences and
  some cool work in ttm/amdgpu from Christian
- drm event prep for both nonblocking commit and atomic fences
- Gustavo seems on a crusade against the non-kms-native version of the
  vblank functions.
- prep work from Boris to nuke all the silly ->best_encoder
  implementations we have (we really only need that for truly dynamic
  cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on
  intel)
- prep work from Laurent to rework the format handling functions
- and few small things all over

* tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits)
  drm/dsi: Implement set tear scanline
  drm/fb_cma_helper: Implement fb_mmap callback
  drm/qxl: Remove useless drm_fb_get_bpp_depth() call
  drm/ast: Remove useless drm_fb_get_bpp_depth() call
  drm/atomic: Fix remaining places where !funcs->best_encoder is valid
  drm/core: Change declaration for gamma_set.
  Documentation: add fence-array to kernel DocBook
  drm/shmobile: use drm_crtc_vblank_{get,put}()
  drm/radeon: use drm_crtc_vblank_{get,put}()
  drm/qxl: use drm_crtc_vblank_{get,put}()
  drm/atmel: use drm_crtc_vblank_{get,put}()
  drm/armada: use drm_crtc_vblank_{get,put}()
  drm/amdgpu: use drm_crtc_vblank_{get,put}()
  drm/virtio: use drm_crtc_send_vblank_event()
  drm/udl: use drm_crtc_send_vblank_event()
  drm/qxl: use drm_crtc_send_vblank_event()
  drm/atmel: use drm_crtc_send_vblank_event()
  drm/armada: use drm_crtc_send_vblank_event()
  drm/doc: Switch to sphinx/rst fixed-width quoting
  drm/doc: Drop kerneldoc for static functions in drm_irq.c
  ...

Merge tag 'topic/lockless-gem-bo-freeing-2016-06-01' of git://anongit.freedesktop.org/drm-intel into drm-next

lockless gem bo freeing patches (and the oddball related patch) for all
the drivers who's maintainers are asleep at the helm - includes you ;-)

I based this on top of drm-fixes to include Chris' fix for the cma issue.

* tag 'topic/lockless-gem-bo-freeing-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits)
  drm/arcpgu: Use lockless gem BO free callback
  drm/sun4i: Use lockless gem BO free callback
  drm/omapdrm: Nuke dummy fb->dirty callback
  drm/msm: Nuke dummy fb->dirty callback
  drm/rockchip: Use cma gem vm ops
  drm/sti: Use lockless gem BO free callback
  drm: sti: remove useless call to dev->struct_mutex
  drm/virtio: Use lockless gem BO free callback
  drm/tilcdc: Use lockless gem BO free callback
  drm/shmob: Use lockless gem BO free callback
  drm/rockchip: Use lockless gem BO free callback
  drm/rcar-du: Use lockless gem BO free callback
  drm/qxl: Use lockless gem BO free callback
  drm/nouveau: Use lockless gem BO free callback
  drm/mga200g: Use lockless gem BO free callback
  drm/fls-dcu: Use lockless gem BO free callback
  drm/cirrus: Use lockless gem BO free callback
  drm/bochs: Use lockless gem BO free callback
  drm/atmel: Use lockless gem BO free callback
  drm/ast: Use lockless gem BO free callback
  ...

Backmerge tag 'v4.7-rc2' into drm-next

Daniel has a pull request that relies on stuff in fixes that are in rc2.

drm/dsi: Implement set tear scanline

Provide a small convenience wrapper that transmits
a set_tear_scanline command.

v2:
  * helper function suggested by Thierry
    for set_tear_scanline
  * Also includes small build fixes from Sumit Semwal.

v3: one scanline parameter suggested by jani

v4: passing the payload properly as suggested by jani

Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465285532-12676-1-git-send-email-simhavcs@gmail.com

drm/fb_cma_helper: Implement fb_mmap callback

In the absence of an fb_mmap callback, the fbdev code falls back to a
naive implementation which relies upon the DMA address being the same
as the physical address, and the buffer being physically contiguous
from there. Whilst this often holds for standard CMA allocations via
the platform's regular DMA ops, if the allocation is provided by an
IOMMU then such assumptions can fall apart spectacularly.

To resolve this, reroute the fb_mmap call to the appropriate DMA API
implementation, as per the other cma_helper calls.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8fd95ac1440e0f01daad6d4380be3a4c8fa61055.1465301219.git.robin.murphy@arm.com

drm/qxl: Remove useless drm_fb_get_bpp_depth() call

The function has no side effect and its returned values are ignored,
don't call it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465236891-11773-1-git-send-email-laurent.pinchart@ideasonboard.com

drm/ast: Remove useless drm_fb_get_bpp_depth() call

The function has no side effect and its returned values are ignored,
don't call it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465236852-11710-1-git-send-email-laurent.pinchart@ideasonboard.com

drm/atomic: Fix remaining places where !funcs->best_encoder is valid

Adapt drm_pick_crtcs() and update_connector_routing() to fallback to
drm_atomic_helper_best_encoder() if funcs->best_encoder() is NULL so
that DRM drivers can leave this hook unassigned if they know they want
to use drm_atomic_helper_best_encoder().

Update the vtables documentation accordingly.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-2-git-send-email-boris.brezillon@free-electrons.com

drm/omapdrm: Implement gamma_lut atomic crtc properties

Implement gamma_lut atomic crtc properties, set crtc gamma size to 256
for all crtcs and use drm_atomic_helper_legacy_gamma_set() as
gamma_set func. The tv-out crtc has 1024 element gamma table (with
10bit precision) in HW, but current Xorg server does not accept
anything else but 256 elements so that is used for all CRTCs. The dss
dispc API converts table of any length for HW and uses linear
interpolation in the process. The default gamma table is restored
if gamma_lut property is deleted.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omapdrm: Workaround for errata i734 (LCD1 Gamma) in DSS dispc

Workaround for errata i734 in DSS dispc
 - LCD1 Gamma Correction Is Not Working When GFX Pipe Is Disabled

For gamma tables to work on LCD1 the GFX plane has to be used at least
once after DSS HW has come out of reset. The workaround sets up a
minimal LCD setup with GFX plane and waits for one vertical sync irq
before disabling the setup and continuing with the context
restore. The physical outputs are gated during the operation.

For details see:
OMAP543x Multimedia Device Silicon Revision 2.0 Silicon Errata
Literature Number: SWPZ037E
Or some other relevant errata document for the DSS IP version.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>