Staging: sm750fb: Fixed indent of switch-case

Fixed indent of switch-case by adding space using tabs.
Problem found using checkpatch.pl
ERROR: space required after that ';' (ctx:VxV)

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: Fix C99 Comments

Used C89 instead of C99 Comment and removed C99 comments performing prints only.
Problem found using checkpatch.pl
ERROR: do not use C99 // comments

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi_apci_1564: Delete a tap

Fix the checkpatch.pl WARNING: line over 80 characters

Signed-off-by: Charlie Wong Super <1213charlie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: prevent underflows in lnet_parse_reply()

I don't know if "hdr->payload_length;" can really be negative, but if so
then we shouldn't allow it.  Do the comparison as an unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: integer overflow in ioctl

hdr->ioc_len is a user controlled u32 so the addition can overflow,
especially on 32 bit systems.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: brw_test.c: remove unneeded return statement

Remove an unneeded return statement in this file

Signed-off-by: Achille Aknin <achille.aknin@ens.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ping_test.c : remove space after function names

remove space between function names and open parentheses as reported by
checkpatch.pl.

Signed-off-by: Auguste Olivry <auguste.olivry@ens.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lov_io.c: remove useless unary pluses

Replace two occurrences of "+1" with simply "1".

Signed-off-by: Luca Wehrstedt <luca.wehrstedt@ens.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: ltr501: Powerdown device on error

Power down device when an error occurs  in order to avoid wasting
power. Move powerdown function up to be seen by the new call and
align parameters for the ltr501_write_contr() call.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc_sysfs: Replace printk(KERN_ERR ) with pr_err()

Fix the following checkpatch warning:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Mark internal functions static in llog_cat.c

This patch marks functions llog_cat_set_first_idx and cat_cancel_cb
static as these are used only within this file. Also since cat_cancel_cb
is made static do not export it.

This eliminates the following sparse warning:
warning: symbol * was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Mark internal functions as static

This patch makes functions mgc_logname2resid, mgc_set_info_async
and mgc_init static as these are only used internally.

This also eliminates sparse warnings of the type:
warning: symbol * was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Include header file that declares lprocfs_mdc_init_vars

This patch includes the header file mdc_internal.h that declares the
function lprocfs_mdc_init_vars.

This also eliminates the sparse warning:
warning: symbol 'lprocfs_mdc_init_vars' was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Include header for functions prototypes

This patch includes the header lustre/include/lclient.h that declares
the functions lov_lsm_put and lov_read_and_clear_async_rc defined in
lov_object.c.

This eliminates warnings reported by sparse:
warning: symbol was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Add header that declares function lprocfs_lmv_init_vars

This patch includes the header file lmv_internal.h that declares
the function lprocfs_lmv_init_vars defined in lproc_lmv.c.

This eliminates the sparse warning:
warning: symbol 'lprocfs_lmv_init_vars' was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Make obd_proc_version_seq_show static

The function obd_proc_version_seq_show is only used in this
file, so make it static.

This eliminates the following sparse warning:
warning: symbol 'obd_proc_version_seq_show' was not declared. Should it be static?

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Add function prototypes in console.h

Sparse reported the following warnings:
warning: symbol 'lstcon_console_init' was not declared. Should it be static?
warning: symbol 'lstcon_console_fini' was not declared. Should it be static?
warning: symbol 'lstcon_ioctl_entry' was not declared. Should it be static?

However since these functions are used in other files,
they cannot be made static, so add protoypes for the same in console.h.

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Remove zero-testing pointer typed value

Removes variable comparison with 0 by using !. Done using following
coccinelle script.

@ disable is_zero,isnt_zero @
expression *E;
expression E1,f;
@@

E = f(...)
<...
(
- E == 0
+ !E
|
- E != 0
+ E
|
- 0 == E
+ !E
|
- 0 != E
+ E
)
...>
?E = E1

@ disable is_zero,isnt_zero @
expression *E;
@@

(
  E ==
- 0
+ NULL
|
  E !=
- 0
+ NULL
|
- 0
+ NULL
  == E
|
- 0
+ NULL
  != E
)

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Remove duplicated argument to |

Delete duplicated argument to | for the state argument in
the _clr_fwstate_() function call as it is redundant.
Detected with coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Use memdup_user() instead of copy_from_user()

Use memdup_user() to avoid its duplicated implementation and simplify
code. memdup_user() uses GFP_KERNEL instead of GFP_ATOMIC,
which is valid because copy_from_user() might sleep and it's useless
to make the allocation atomic. Found with coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: magnetometer: mag3110: Place driver on standby on error

Place driver on standby mode on error in order to prevent wasting
power. Move standby function above to be seen by the new call.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: accel: Remove explicit NULL comparison

This patch removes explicit NULL comparison and writes it in its
equivalent shorter form. Done with coccinelle.

@replace_rule@
expression e;
@@

-e == NULL
+ !e

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: adc: Remove explicit NULL comparison

This patch removes explicit NULL comparison and writes it in its
shorter form. Detected with coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: impedance-analyzer: Remove explicit NULL comparison

This patch removes explicit NULL comparison and replaces it with
its shorter form. Detected with coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: trigger: Remove explicit NULL comparison

This patch removes explicit NULL comparison and replaces it
with its shorter form. Detected with coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: meter: Remove explicit NULL comparison

This patch removes explicit NULL comparison and replaces it with
its shorter form. Detected with coccinelle.

@replace_rule@
expression e;
@@

-e == NULL
+ !e

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: iio_simple_dummy: Remove explicit NULL comparison

This patch removes explicit NULL comparison and writes it in its
simpler form. Done with coccinelle:

@replace_rule@
expression e;
@@

-e == NULL
+ !e

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: iio_dummy_evgen: Simplify NULL comparison

Remove explicit NULL comparison and write it in its simpler form.
Replacement done with coccinelle:

@replace_rule@
expression e;
@@

-e == NULL
+ !e

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Add error check on iio_register_device()

This patch checks if an error occurred on probe and stops the
device in order to avoid wasting power.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.1b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new devices, functionality and cleanup for IIO in the 4.1 cycle.

New Functionality
* Watermark logic for buffers.  Allows for blocking reads to block until
  their requested amount is available - previously they only blocked until
  a single scan of data was available.  Also allows for polling for a
  watermark amount of data to be available.  This feature was first proposed
  some time ago to good responses, but not taken further by the original author
  Octavian has picked up the gauntlet and taken it through
  to merging (along with the hardware fifo support that follows).
* New approach to hardware fifo handling - in particular handling the
  interaction of a hardware fifo feeding into a software fifo and their
  watershed events.  We don't have every possible case well covered yet,
  but this is certainly a good, flexible starting point.  This will replace
  the previous approach used in ancient drivers (sca3000) where we just
  exposed the hardware buffer directly to userspace.  Very few pieces of
  hardware have sufficiently long buffers for that to be an adequate solution.
* bmc150_accel - hardware fifo support.
* mlx90614 - support dual IR sensor devices + some refactoring to clean up the
  code and allow some other functionality currently under review.
* L3GD20H gyroscope support added to the st_gyro driver.
* lis3lv02d accelerometer added to the st_gyro driver. Note this part is
  also supported by the older lis3 driver under misc.  A lengthy discussion
  took place and concluded that holding parts out on the basis that whole
  driver would be subsumed into this one was counter productive.  Better
  to add part support and add additional features as people need them.
  Basically there was not advantage in not merging the support.
* max517 driver gains support for MAX520 and MAX521 DACs.

Documentation
* 3.20 -> 4.0 renaming for recent docs. Whilst technically a fix, I think
  people will cope until the next merge merge window.
* An ABI typo hat -> What:  More ABIs should have hats.
* Document in_rot_offset, illuminance_raw and illuminance_scale.

Cleanups
* Fix a scale extraction bug in generic_buffer.c example.
* Constify a load of device tree related structures.

iio: Documentation: fix kernel version for 4.0 new ABI

Kernel version for new ABI in 4.0 has been documented
as 3.20, since the changes have been merged before the kernel
version number change.

Change kernel version from 3.20 to 4.0.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation/ABI:iio:fix typo

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: mlx90614: Support devices with dual IR sensor

The model is detected by reading the EEPROM configuration during
probing.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: mlx90614: Add symbols for accessible registers

Add symbols for all accessible RAM and EEPROM registers, as well as the
sleep command and timings defined in the datasheet.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: bmc150_accel: add support for hardware fifo

We only advertise hardware fifo support if the I2C bus supports full
I2C or smbus I2C block data reads since it is mandatory to read the
full frame in one read (otherwise the rest of the frame is discarded).

The hardware fifo is enabled only when triggers are not active because:

(a) when using the any-motion trigger the user expects to see samples
based on ROC events, but the fifo stores samples based on the sample
frequency

(b) the data-ready trigger is waking the CPU for for every sample, so
using the hardware fifo does not have any benefit

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: add support for hardware fifo

Some devices have hardware buffers that can store a number of samples
for later consumption. Hardware usually provides interrupts to notify
the processor when the FIFO is full or when it has reached a certain
watermark level. This helps with reducing the number of interrupts to
the host processor and thus it helps decreasing the power consumption.

This patch enables usage of hardware FIFOs for IIO devices in
conjunction with software device buffers. When the hardware FIFO is
enabled the samples are stored in the hardware FIFO. The samples are
later flushed to the device software buffer when the number of entries
in the hardware FIFO reaches the hardware watermark or when a flush
operation is triggered by the user when doing a non-blocking read
on an empty software device buffer.

In order to implement hardware FIFO support the device drivers must
implement the following new operations: setting and getting the
hardware FIFO watermark level, flushing the hardware FIFO to the
software device buffer. The device must also expose information about
the hardware FIFO such it's minimum and maximum watermark and if
necessary a list of supported watermark values. Finally, the device
driver must activate the hardware FIFO when the device buffer is
enabled, if the current device settings allows it.

The software device buffer watermark is passed by the IIO core to the
device driver as a hint for the hardware FIFO watermark. The device
driver can adjust this value to allow for hardware limitations (such
as capping it to the maximum hardware watermark or adjust it to a
value that is supported by the hardware). It can also disable the
hardware watermark (and implicitly the hardware FIFO) it this value is
below the minimum hardware watermark.

Since a driver may support hardware FIFO only when not in triggered
buffer mode (due to different semantics of hardware FIFO sampling and
triggered sampling) this patch changes the IIO core code to allow
falling back to non-triggered buffered mode if no trigger is enabled.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: add watermark logic to iio read and poll

Currently the IIO buffer blocking read only wait until at least one
data element is available.
This patch makes the reader sleep until enough data is collected before
returning to userspace. This should limit the read() calls count when
trying to get data in batches.

Co-author: Yannick Bedhomme <yannick.bedhomme@mobile-devices.fr>
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
[rebased and remove buffer timeout]
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

IIO: Add support for L3GD20H gyroscope

It can be used exactly like L3GD20 but it has a different WhoAmI
register value.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

tools: iio: generic_buffer: Fix generic scale extraction

When using generic_buffer to read data, the scale is not properly
detected for scale shared by type. This is caused by a problem
with the generation of generic name out of the full name.
E.g.: for current->name in_accel_z, the extracted generic name
is "in" (when it should be "in_accel"). This is used in generic_buffer
to generate scale and offset paths (in_accel_scale).

Consider the in_ or out_ prefix when extracting the generic name
from the full name.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add ABI documentation for in_rot offset value

This patch adds ABI documentation entries for in_rot_offset.
At least one user for these is present that is the  HID Sensors Driver.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: max517: Add support for MAX520 and MAX521 chips.

MAX520 and MAX521 are protocol-compatible with the already supported
chips, just have more channels.

Signed-off-by: Antonio Fiol <antonio@fiol.es>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: constify of_device_id array

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add ABI documentation for illuminance raw and scale values in light

This patchset adds ABI documentation for the following attributes:

in_illuminance_scale, used atleast once in al3320a staging/iio/light/
in_illuminance_calibscale, used atleast once in cm32181
in_illuminance_input, used in cm3232 at least once
in_illuminance_raw used atleast once in al3320a
in_illuminance_clear_raw and in_illuminance_ir_raw exposed by
gp2ap020a00f with modifiers IIO_MOD_LIGHT_CLEAR and
IIO_MOD_LIGHT_IR respectively.

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st-sensors: add support for lis3lv02d accelerometer

This adds support for the LIS3LV02 accelerometer found in the
ST Microelectronics Nomadik board series.

Cc: devicetree@vger.kernel.org
Cc: Denis CIOCCA <denis.ciocca@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: sm750fb: Change "foo * bar" style to "foo *bar"

This patch fixes the checkpatch.pl error:

ERROR: "foo * bar" should be "foo *bar"
+int ddk750_initHw(initchip_param_t * pInitParam)

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Move switch case trailing statment

This patch fixes the checkpatch.pl error:

ERROR: trailing statements should be on next line

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Add spaces after ','

This patch fixes the checkpatch.pl error:

ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Add space before switch statement

This patch fixes the checkpatch.pl warnings:

ERROR: space required before the open parenthesis '('
+               switch(divisor) {

ERROR: space required before the open parenthesis '('
+               switch(divisor) {

ERROR: space required before the open parenthesis '('
+       switch(reg) {

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Add space before if statement

This patch fix the checkpatch.pl warning:

ERROR: space required before the open parenthesis '('

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Fix for statement style

This patch fixes the checkpatch.pl warnings:

ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '<=' (ctx:VxV)
ERROR: spaces required around that '>' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: space required after that ';' (ctx:VxV)

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Fix if/else/for/switch braces style

This patch fixes the checkpatch.pl errors:

ERROR: that open brace { should be on the previous line
ERROR: else should follow close brace '}'
WARNING: braces {} are not necessary for single statement blocks
ERROR: space required before the open brace '{'

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Add space after struct definition

This patch fixes checkpatch.pl warning:

WARNING: missing space after struct definition
+typedef struct _pllcalparam{

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: Remove redundant and disabled code block

Removing code guarded by undefined macro SLIC_TRACE_DUMP_ENABLED

Signed-off-by: Niranjan Dighe <niranjan.dighe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove comparison

the comparison is always true as the dev_t has been initialized in the
init function and we are sending that initialized dev_t to the
cleanup().

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove global dev_t

the global variable majordev is no longer required, as it is not being
used anywhere.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: use local variable in cleanup

the dev_t was being stored in visorchipset_platform_device.dev.devt
while initializing the module. so pass that value as an argument to
cleanup() so that it can use this local variable instead of the global
variable.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: use local variable

we are getting dev_t as an argument in the function, so use the local
variable instead of the global variable "majordev".
this global variable will be removed in one of the next patch of the
series.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove redundant variable

remove the variable "registered", which was used in the cleanup() to
detect if the driver has successfully initialized. the cleanup()
is called from module_exit, so its obvious that the module has
successfully initialized. if the initialization had failed, then
we will never be in the cleanup().

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Remove RTSX_READ_REG and RTSX_WRITE_REG macros

Macros with hidden flow control are bad form as the code path
taken can be unexpected for the reader.

Expand these in-place and remove the macros.

Done with coccinelle script:

@@
expression chip;
expression arg1;
expression arg2;
expression arg3;
@@

- RTSX_WRITE_REG(chip, arg1, arg2, arg3);
+ retval = rtsx_write_register(chip, arg1, arg2, arg3);
+ if (retval) {
+ rtsx_trace(chip);
+ return retval;
+ }

@@
expression chip;
expression arg1;
expression arg2;
@@

- RTSX_READ_REG(chip, arg1, arg2);
+ retval = rtsx_read_register(chip, arg1, arg2);
+ if (retval) {
+ rtsx_trace(chip);
+ return retval;
+ }

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Remove TRACE_RET and TRACE_GOTO macros

Remove these flow hiding macros.

Miscellanea:

o Add a macro and function to replace a large inline
o Simplify #includes
o Add trace.c and update Makefile
o Remove static inline filename function and use kbasename instead

This reduces object size quite a lot: ~350KB (x86-64 allyesconfig)

$ size drivers/staging/rts5208/built-in.o*
   text    data     bss     dec     hex filename
 248385   36728   77888  363001   589f9 drivers/staging/rts5208/built-in.o.new
 506691   83352  115896  705939   ac593 drivers/staging/rts5208/built-in.o.old

Done via coccinelle script and some typing.

@@
expression chip;
expression ret;
@@

- TRACE_RET(chip, ret);
+ rtsx_trace(chip);
+ return ret;

@@
expression chip;
identifier label;
@@

- TRACE_GOTO(chip, label);
+ rtsx_trace(chip);
+ goto label;

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: replace kzalloc and memcpy by kmemdup

This was generated by 'make coccicheck' using scripts at
scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Niranjan Dighe <niranjan.dighe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Update RT_TRACE macro and uses

Create an rt_trace function using %pV to reduce overall code size.
Update the macro uses to remove unnecessary and now harmful parentheses.

Miscellanea around these changes:

o Coalesce formats
o Realign arguments
o Remove commented-out RT_TRACE uses
o Spelling fixes in formats
o Add missing newlines to formats
o Remove multiple newlines from formats
o Neaten formats where noticed
o Use %pM in one instance

Reduces code size ~20KB

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192 Clean up function definition

Change function definition to match its prototype declaration. This
fixes the following warning generated by sparse:

drivers/staging/rtl8192u/r8192U_core.c:1970:6: warning: symbol
'rtl8192_update_ratr_table' was not declared. Should it be static?

Signed-off-by: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix static decleration sparse warning.

The function 'ieee80211_check_auth_response' is used only in this
file, so make it static. This patch fixes the following sparse
warning.

'ieee80211_check_auth_response' was not declared. Should it be static?

Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: implement error handling in ozwpan_init()

Errors are correctly handled in oz_cdev_register() and oz_protocol_init(),
but then they are ignored in ozwpan_init().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: remove dead code

The condition pxmitpriv->hwxmit_entry == 5 is always false because
HWXMIT_ENTRY is always 4.

Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove uses of MAC_FMT and MAC_ARG

Use the standard vsprintf kernel extension to format
mac addresses.

This reduces object code size a bit.

Miscellanea:

o Coalesce formats
o Realign arguments
o Remove the now unused MAC_FMT and MAC_ARG #defines

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Fix typo in fbtft

This patch fix spelling typo in comment and printk within fbtft

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fb_pcd8544: Fix comments style

This patch fixes the following errors by refactoring the comments'
style:

WARNING: line over 80 characters
ERROR: code indent should use tabs where possible

Signed-off-by: Cláudio Maia <crrm@isep.ipp.pt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fb_pcd8544: Fix warning line over 80 characters

This patch fixes the following checkpatch warning:

WARNING: line over 80 characters

Signed-off-by: Cláudio Maia <crrm@isep.ipp.pt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add support for ili9163 controller

Driver for ili9163-based displays (for example: Nokia 5110)

Signed-off-by: Kozhevnikov Anatoly <shilo.xyz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove spinlock helper function

This patch removes the unnecessary spinlock helper function and instead
calls spin_lock and spin_unlock directly.

This does *not* resolve sparse warnings about context imbalances but these are
spurious.

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Fix __iomem pointer types

This patch annotates pointers as referring to I/O mapped memory where they ought
to be, removes now unnecessary ugly casts, eliminates an incorrect deref on I/O
mapped memory by using iowrite16 instead, and updates the pointer arithmetic
accordingly to take into account that the pointers are now byte-sized. This
fixes the following sparse warnings:-

drivers/staging/sm750fb/sm750_cursor.c:113:19: warning: cast removes address space of expression
drivers/staging/sm750fb/sm750_cursor.c:204:19: warning: cast removes address space of expression

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove unused function

This patch removes the unused hw712_fillrect function. This patch fixes
the following sparse warning:-

drivers/staging/sm750fb/sm750_accel.c:95:5: warning: symbol 'hw712_fillrect' was not declared. Should it be static?

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Make internal functions static

This patch declares externally unavailable functions static. This fixes
the following sparse warnings:-

drivers/staging/sm750fb/ddk750_hwi2c.c:63:6: warning: symbol 'hwI2CWaitTXDone' was not declared. Should it be static?
drivers/staging/sm750fb/ddk750_hwi2c.c:93:14: warning: symbol 'hwI2CWriteData' was not declared. Should it be static?
drivers/staging/sm750fb/ddk750_hwi2c.c:160:14: warning: symbol 'hwI2CReadData' was not declared. Should it be static?

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Use memset_io instead of memset

This patch takes into account that cursor->vstart, crtc->vScreen and
share->pvMem are pointers to memory-mapped I/O and thus we should use memset_io
to make this explicit. In addition, some architectures require special treatment
of memory-mapped I/O so the previous code could actually break without this
change.

This fixes the following sparse warnings:-

drivers/staging/sm750fb/sm750.c:489:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:490:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:501:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:502:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:833:5: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:1154:9: warning: incorrect type in argument 1 (different address spaces)

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: add MODULE_DEVICE_TABLE

add MODULE_DEVICE_TABLE to support hot-plugging.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/xattr: xattr data may be gone with lock held

Xattr cached data may be gone, but lock still held, in this case,
refetch xattr from server, otherwise client will return error.

Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-on: http://review.whamcloud.com/12952
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: update timestamps after buiding rpc

The mtime/atime/ctime in the write RPC has to be updated after
the RPC is built (where xid is generated), otherwise, it could
race with the setattr and updating wrong timestamps on OST side.

Seems this regression was introduced when landing clio code.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/13261
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5951
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: glimpse the inode before doing fiemap

For a new inode, the i_size is 0 until a stat, which will yield
an empty fiemap result.
Fix the issue by glimpsing the size before doing fiemap.

Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13439
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6091
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: fix import state during replay

Client doesn't restore import state correctly
on reconnect during replay. It resends lock replay
when final ping was queued by server.
Server fails with "target_queue_recovery_request())
ASSERTION( req->rq_export->exp_lock_replay_needed ) failed"

Add imp_replay_state to store last replay state.
imp_state is restored from imp_replay_state
during reconnect.

Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Xyratex-bug-id: MRP-2022
Reviewed-on: http://review.whamcloud.com/12163
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5651
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: don't crash accessing LOV object with FID{0, 0}

Some object maybe has a corrupted LOV EA or a hole in
LOV EA. We should not crash client in such case.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/12740
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4958
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: detach MGC dev on error

lustre_start_mgc() creates MGC device, if error happens later on
ll_fill_super(), this device is still attached, and later mount
fails by keep complaining that the MGC device's already in the
client node.

It turns out that the device was referenced by mgc config llog data
which is arranged in the mgc lock requeue thread re-trying to get its
mgc lock, and in normal case, this llog reference only released in
mgc_blocking_ast() when the system is umount.

This patch make mgc_precleanup() to wake up requeue thread to handle
the config llog data.

This patch also makes mgc_setup() wait for mgc_requeue_thread() start
before moving on.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/11765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4943
Reviewed-by: Ryan Haasken <haasken@cray.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: check the import stat for lprocfs

in lprocfs_mgc_rd_ir_state, the import state should be checked
the validity before doing further work.

Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/12896
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5650
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: false alarm in AT network latency measuring

If early reply of client RPC is lost and client RPC is expired and
resent, server will drop the resent RPC because it's already in
processing, server may also send reply or early reply to client,
which can still match reply buffer of the original request.
In this case, client is measuring time from resent time, but server
is reporting service time of original RPC, which is longer than
the time measured by client.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/12855
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5545
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: Handle empty but non-zero acl xattr

We have found that posix_acl_access can have a value
of \002\000\000\000.  In that case body->aclsize is
non-zero, but the there are no actuall acls stored
in the xattr.

In mdc_unpack_acl(), it only checks IS_ERR() on the
pointer returned by posix_acl_from_xattr(), it does not
check for NULL.  Because of the above situation, the
xattr aclsize can be non-zero, but posic_acl_from_xattr()
still returns NULL.  Passing NULL to posix_acl_valid()
crashes the kernel.

We add a check to properly handle the NULL return value.

Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/11989
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5150
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: shorten IO calling path

By using osc_io_unplug_aync() for osc_queue_sync_pages() to shorten
the IO calling path, to reduce the chance of stack overflow.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-on: http://review.whamcloud.com/11612
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3188
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ft1000-pcmcia: ft1000_hw.c: code refactoring: add ft1000_read_dsp_timer()

Add new function ft1000_read_dsp_timer() replacing recurring code block for
reading DSP timer. Such code refactoring solves all remaining "line over 80
characters" warnings reported by checkpatch.pl.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ft1000-pcmcia: ft1000_hw.c: fix style issues not requiring code refactoring

Fix all the trivial style issues (as reported by checkpatch.pl) not requiring
code refactoring. A following patch is expected to fix the remaining issues by
performing some code refactoring.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: fix lcd type

the lcd type as defined in the Kconfig is not matching in the code.
as a result the rs, rw and en pins were getting interchanged.
Kconfig defines the value of PANEL_LCD to be 1 if we select custom
configuration but in the code LCD_TYPE_CUSTOM is defined as 5.

my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it
as pins of LCD_TYPE_OLD, and it was not working.
Now values are corrected with referenece to the values defined in
Kconfig and it is working.
checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration.

Cc: <stable@vger.kernel.org> # 2.6.32+
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: sync: Fix memory corruption in sync_timeline_signal().

The android_fence_release() function checks for active sync points
by calling list_empty() on the list head embedded on the sync
point. However, it is only valid to use list_empty() on nodes that
have been initialized with INIT_LIST_HEAD() or list_del_init().

Because the list entry has likely been removed from the active list
by sync_timeline_signal(), there is a good chance that this
WARN_ON_ONCE() will be hit due to dangling pointers pointing at
freed memory (even though the sync drivers did nothing wrong)
and memory corruption will ensue as the list entry is removed for
a second time, corrupting the active list.

This problem can be reproduced quite easily with CONFIG_DEBUG_LIST=y
and fences with more than one sync point.

Signed-off-by: Alistair Strachan <alistair.strachan@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Colin Cross <ccross@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon: Remove extern from .c file

This patch fixes the checkpatch.pl warning:

WARNING: externs should be avoided in .c files
+extern void octeon_mdiobus_force_mod_depencency(void);

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i2o: Remove indentation of labels

This patch fixes the checkpatche.pl warnings:

WARNING: labels should not be indented
+      context_remove:

WARNING: labels should not be indented
+      nop_msg:

WARNING: labels should not be indented
+      exit:

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove do {} while(0) in single statement macro

This patch fixes the checkpatch.pl warning:

WARNING: Single statement macros should not use a do {} while (0) loop
+#define write_reg(par, ...)                                              \
+do {                                                                     \
+       par->fbtftops.write_register(par, NUMARGS(__VA_ARGS__), __VA_ARGS__); \
+} while (0)

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add space around '='

This patch fixes the checkpatch.pl error:

ERROR: spaces required around that '=' (ctx:VxV)
+                       sdev->bits_per_word=9;
                                           ^

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: use the BIT macro in adc

This patch replaces bit shifting on:
0,1,2, and 3 with the BIT(x) macro.
Issue addressed by checkpatcg.pl.
This was done with the help of Coccinelle:

@r1@
identifier x;
constant int g;
@@

(
0<<\(x\|g\)
|
1<<\(x\|g\)
|
2<<\(x\|g\)
|
3<<\(x\|g\)
)

@script:python b@
g2 <<r1.g;
y;
@@
coccinelle.y = int(g2) + 1

@c@
constant int r1.g;
identifier b.y;
@@
(
-(1 << g)
+BIT(g)
|
-(0 << g)
+ 0
|
-(2 << g)
+BIT(y)
|
-(3 << g)
+(BIT(y)| BIT(g))
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Add braces on all arms of if statement

The following patch adds braces on all arms of if statement.
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: add blank line after function declaration

This patch adds blank line after function declaration.
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: remove multible blank lines

This patch removes extra blank lines to address checkpatch.pl warnings
regarding that.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Adjust alignment for function parameters

This patch adjust parameters alignment in functions to match
open parenthesis. Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>