Yogesh Ashok Powar [Fri, 8 Jul 2011 00:37:09 +0000 (17:37 -0700)]
mwifiex: 4-byte alignment in mwifiex_process_sta_txpd()
In XMIT path, the skb that we get from the kernel itself is not
aligned with 4-byte boundary on some embedded platforms.
Had it not been the presence of tx_pkt_offset field in txpd, 4 byte
memory alignment was not possible without memmove of entire skb.
And that would have increased MIPS instead of reducing.
With this patch few memory cycles can be saved while fetching
interface header and txpd structure because of 4 bytes memory
alignment.
Reported-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Tested-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Fri, 8 Jul 2011 00:33:20 +0000 (17:33 -0700)]
mwifiex: fix minor issue in debugfs command 'info'
Debugfs command 'info' shows wrong interface type. The regression
occurred due to commit
eecd8250e (mwifiex: remove MWIFIEX_BSS_MODE_
macros) in which we replaced MWIFIEX_BSS_MODE_* macros by
NL80211_IFTYPE_*, for example,
MWIFIEX_BSS_MODE_IBSS (2) --> NL80211_IFTYPE_ADHOC (1)
The issue is fixed by swapping static character array used to
display interface type information.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Fri, 8 Jul 2011 00:33:19 +0000 (17:33 -0700)]
mwifiex: fix regression in WEP security mode
Htcapinfo is unnecessarily sent in assoc request in WEP security due
to a regression introduced by commit
2be50b8df53 (mwifiex: remove
redundant encryption_mode mapping).
The issue is fixed in this patch.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:14:25 +0000 (18:14 -0400)]
ath5k: read sc->imask with sc->irqlock held
Signed-off-by: Pavel Roskin <proski@gnu.org>
sc->imask may change if ath5k_set_current_imask() races against itself.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:14:19 +0000 (18:14 -0400)]
ath5k: use kstrtoint() to parse numbers coming from sysfs
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:14:13 +0000 (18:14 -0400)]
ath5k: fix formatting errors found by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:14:07 +0000 (18:14 -0400)]
ath5k: fix misplaced or extraneous braces found by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:14:01 +0000 (18:14 -0400)]
ath5k: use parentheses around macro definitions
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:55 +0000 (18:13 -0400)]
ath5k: don't use volatile, it's not needed
Signed-off-by: Pavel Roskin <proski@gnu.org>
The reg variable is only used by __raw_writel() and __raw_readl(), which
should guarantee memory access in the right order.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:48 +0000 (18:13 -0400)]
ath5k: use more readable way to clear MAC address
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:42 +0000 (18:13 -0400)]
ath5k: use DEFINE_PCI_DEVICE_TABLE in led.c, mark users with __devinit
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:36 +0000 (18:13 -0400)]
ath5k: use KERN_WARNING in ATH5K_PRINTF
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:30 +0000 (18:13 -0400)]
ath5k: remove unneeded parentheses after return
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:24 +0000 (18:13 -0400)]
ath5k: replace spaces with tabs as suggested by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 7 Jul 2011 22:13:17 +0000 (18:13 -0400)]
ath5k: remove PRIV_ENTRY and PRIV_ASSIGN macros, they obfuscate the code
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 7 Jul 2011 21:01:25 +0000 (23:01 +0200)]
carl9170: Implement tx_frames_pending mac80211 callback function
Implementing this callback function will cause mac80211 refrain from
going to powersave state when there are still untransmitted TX frames
in the queues.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sebastian Andrzej Siewior [Thu, 7 Jul 2011 19:58:10 +0000 (21:58 +0200)]
net/b43: don't return IRQ_HANDLED if nothing was done
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 7 Jul 2011 18:06:56 +0000 (20:06 +0200)]
b43: HT-PHY: define dummy TX power functions
Without them we get Oops with NULL pointer
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Thu, 7 Jul 2011 18:03:39 +0000 (23:33 +0530)]
mac80211: Restart STA timers only on associated state
A panic was observed when the device is failed to resume properly,
and there are no running interfaces. ieee80211_reconfig tries
to restart STA timers on unassociated state.
Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Thu, 7 Jul 2011 18:03:38 +0000 (23:33 +0530)]
ath9k_htc: do not configure filter before driver is started
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 7 Jul 2011 16:58:25 +0000 (18:58 +0200)]
b43: LCN-PHY: include new PHY in common code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 7 Jul 2011 16:58:24 +0000 (18:58 +0200)]
b43: define firmwares for HT and LCN PHYs
We were uploading different firmwares to the hardware until finding
responding one.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Thu, 7 Jul 2011 16:58:01 +0000 (18:58 +0200)]
mac80211: allow driver to generate P1K for IV32
In order to support pre-populating the P1K cache in
iwlwifi hardware for WoWLAN, we need to calculate
the P1K for the current IV32. Allow drivers to get
the P1K for any given IV32 instead of for a given
packet, but keep the packet-based version around as
an inline.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Thu, 7 Jul 2011 16:58:00 +0000 (18:58 +0200)]
mac80211: allow drivers to access key sequence counter
In order to implement GTK rekeying, the device needs
to be able to encrypt frames with the right PN/IV and
check the PN/IV in RX frames. To be able to tell it
about all those counters, we need to be able to get
them from mac80211, this adds the required API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Thu, 7 Jul 2011 16:45:03 +0000 (18:45 +0200)]
mac80211: simplify RX PN/IV handling
The current rx->queue value is slightly confusing.
It is set to 16 on non-QoS frames, including data,
and then used for sequence number and PN/IV checks.
Until recently, we had a TKIP IV checking bug that
had been introduced in 2008 to fix a seqno issue.
Before that, we always used TID 0 for checking the
PN or IV on non-QoS packets.
Go back to the old status for PN/IV checks using
the TID 0 counter for non-QoS by splitting up the
rx->queue value into "seqno_idx" and "security_idx"
in order to avoid confusion in the future. They
each have special rules on the value used for non-
QoS data frames.
Since the handling is now unified, also revert the
special TKIP handling from my patch
"mac80211: fix TKIP replay vulnerability".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 7 Jul 2011 13:25:27 +0000 (15:25 +0200)]
b43: LCN-PHY add place for new PHY support
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 6 Jul 2011 20:02:14 +0000 (22:02 +0200)]
mac80211: use AES_BLOCK_SIZE
mac80211 has a defnition of AES_BLOCK_SIZE and
multiple definitions of AES_BLOCK_LEN. Remove
them all and use crypto/aes.h.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 18:27:25 +0000 (20:27 +0200)]
b43: read radio ID on new cores
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 18:27:24 +0000 (20:27 +0200)]
b43: use radio ID reading code to older cores only
Newer ones need separated way
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 16:05:14 +0000 (18:05 +0200)]
b43: select BLOCKIO for BCMA
We want PIO as fallback for BCMA as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 15:41:55 +0000 (17:41 +0200)]
b43: change selecting ucode for newer cores
Older cores had unique PHY. This is not true anymore for newer ones.
For example core rev 16 can be LP, SSLPN or N (PHY).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 13:45:28 +0000 (15:45 +0200)]
b43: bus: add helpers for getting/setting wldev from/in bus core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 13:45:27 +0000 (15:45 +0200)]
b43: handle BCMA in bus switches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 13:45:26 +0000 (15:45 +0200)]
b43: use switches for SSB specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 6 Jul 2011 20:00:35 +0000 (22:00 +0200)]
mac80211: fix CMAC races
Just like TKIP and CCMP, CMAC has the PN race.
It might not actually be possible to hit it now
since there aren't multiple ACs for management
frames, but fix it anyway.
Also move scratch buffers onto the stack.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 6 Jul 2011 19:59:39 +0000 (21:59 +0200)]
mac80211: fix CCMP races
Since we can process multiple packets at the
same time for different ACs, but the PN is
allocated from a single counter, we need to
use an atomic value there. Use atomic64_t to
make this cheaper on 64-bit platforms, other
platforms will support this through software
emulation, see lib/atomic64.c.
We also need to use an on-stack scratch buf
so that multiple packets won't corrupt each
others scratch buffers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Thu, 7 Jul 2011 20:28:01 +0000 (22:28 +0200)]
mac80211: fix TKIP races, make API easier to use
Our current TKIP code races against itself on TX
since we can process multiple packets at the same
time on different ACs, but they all share the TX
context for TKIP. This can lead to bad IVs etc.
Also, the crypto offload helper code just obtains
the P1K/P2K from the cache, and can update it as
well, but there's no guarantee that packets are
really processed in order.
To fix these issues, first introduce a spinlock
that will protect the IV16/IV32 values in the TX
context. This first step makes sure that we don't
assign the same IV multiple times or get confused
in other ways.
Secondly, change the way the P1K cache works. I
add a field "p1k_iv32" that stores the value of
the IV32 when the P1K was last recomputed, and
if different from the last time, then a new P1K
is recomputed. This can cause the P1K computation
to flip back and forth if packets are processed
out of order. All this also happens under the new
spinlock.
Finally, because there are argument differences,
split up the ieee80211_get_tkip_key() API into
ieee80211_get_tkip_p1k() and ieee80211_get_tkip_p2k()
and give them the correct arguments.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 6 Jul 2011 17:03:46 +0000 (19:03 +0200)]
b43: implement BCMA bus ops
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 5 Jul 2011 21:54:07 +0000 (23:54 +0200)]
b43: make b43_wireless_init bus generic
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 8 Jul 2011 15:05:20 +0000 (11:05 -0400)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Arik Nemtsov [Thu, 7 Jul 2011 11:25:23 +0000 (14:25 +0300)]
wl12xx: start/stop queues according to global per-AC counters
Split tx_queue_count to count per-AC skb's queued, instead of relying on
the skb-queue len. The skb queues used were only valid in STA-mode, as
AP-mode uses per-link queues.
This fixes a major regression in AP-mode, caused by the patch
"wl12xx: implement Tx watermarks per AC". With that patch applied, we
effectively had no regulation of Tx queues in AP-mode. Therefore a
sustained high rate of Tx could cause exhaustion of the skb memory pool.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 21:00:21 +0000 (23:00 +0200)]
rt2x00: Implement tx_frames_pending mac80211 callback function.
Implementing this callback function will cause mac80211 refrain from
going to powersave state when there are still untransmitted TX frames
in the queues.
This would exactly mimic the behaviour of the legacy vendor driver which
also doesn't go in powersave mode if there are still TX frames that are not
transmitted.
This should make powersaving and rt2x00 a better couple.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:59:19 +0000 (22:59 +0200)]
rt2x00: Properly identify rt2800usb devices.
Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset.
Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:58:55 +0000 (22:58 +0200)]
rt2x00: Add device ID for RT539F device.
Reported-by: Wim Vander Schelden <wim@fixnum.org>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:37 +0000 (22:57 +0200)]
rt2x00: Reduce window of a queue's tx lock.
Currently a lot of actions that can be done without the queue's tx lock
being held are done inside the locked area.
Move them out to have a leaner and meaner code that operates while the
tx lock is being held.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:00 +0000 (22:57 +0200)]
rt2x00: Don't use queue entry as parameter when creating TX descriptor.
The functions that create the tx descriptor structure do not operate on
a queue entry at all. Signal this fact in the code by not providing a
queue entry as a parameter, but the rt2x00 device structure and the skb
directly.
This patch is a preparation for reducing the time a queue is locked for
a tx operation.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:56:24 +0000 (22:56 +0200)]
rt2x00: Serialize TX operations on a queue.
The rt2x00 driver gets frequent occurrences of the following error message
when operating under load:
phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the
non-full queue 2.
This is caused by simultaneous attempts from mac80211 to send a frame via
rt2x00, which are not properly serialized inside rt2x00queue_write_tx_frame,
causing the second frame to fail sending with the above mentioned error
message.
Fix this by introducing a per-queue spinlock to serialize the TX operations
on that queue.
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 5 Jul 2011 17:48:26 +0000 (19:48 +0200)]
bcma: detect PCI core working in hostmode
We must not init it like clientmode one, it would break device (tested
by Hauke on BCM4718). Add stub hostmode driver for now.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Wed, 6 Jul 2011 01:01:11 +0000 (18:01 -0700)]
mwifiex: modify SDIO aggregation Tx/Rx buffer size
The SDIO aggregation buffer size has been modified to an optimum
value which gives good throughput results.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jean Delvare [Tue, 5 Jul 2011 22:27:06 +0000 (00:27 +0200)]
ipw2100: Fix command list for debugging
There is a stray "undefined" string in the array, get rid of it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:41 +0000 (16:35 +0200)]
mac80211: support GTK rekey offload
This adds the necessary mac80211 APIs to support
GTK rekey offload, mirroring the functionality
from cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:40 +0000 (16:35 +0200)]
cfg80211/nl80211: support GTK rekey offload
In certain circumstances, like WoWLAN scenarios,
devices may implement (partial) GTK rekeying on
the device to avoid waking up the host for it.
In order to successfully go through GTK rekeying,
the KEK, KCK and the replay counter are required.
Add API to let the supplicant hand the parameters
to the driver which may store it for future GTK
rekey operations.
Note that, of course, if GTK rekeying is done by
the device, the EAP frame must not be passed up
to userspace, instead a rekey event needs to be
sent to let userspace update its replay counter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:39 +0000 (16:35 +0200)]
mac80211: allow driver to iterate keys
When in suspend/wowlan, devices might implement crypto
offload differently (more features), and might require
reprogramming keys for the WoWLAN (as it is the case
for Intel devices that use another uCode image). Thus
allow the driver to iterate all keys in this context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jon Mason [Thu, 30 Jun 2011 15:42:47 +0000 (10:42 -0500)]
iwlwifi: remove unnecessary read of PCI_CAP_ID_EXP
The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 6 Jul 2011 19:03:16 +0000 (15:03 -0400)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Sergei Shtylyov [Fri, 1 Jul 2011 18:34:42 +0000 (22:34 +0400)]
ssb: use pci_dev->subsystem_{vendor,device}
The SSB code reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Fri, 1 Jul 2011 18:33:08 +0000 (22:33 +0400)]
ssb: use pci_dev->revision
The SSB code reads PCI revision ID from the PCI configuration register while
it's already stored by the PCI subsystem in the 'revision' field of 'struct
pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Büsch [Mon, 4 Jul 2011 17:51:11 +0000 (19:51 +0200)]
b43: Add RX side DMA memory barrier
This adds a memory barrier to ensure the writes to the ring memory
are committed before the DMA ring pointer is updated.
We do a similar thing on the TX side already.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:38 +0000 (19:31 -0300)]
NFC: add Documentation/networking/nfc.txt
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:37 +0000 (19:31 -0300)]
NFC: pn533: add NXP pn533 nfc device driver
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:36 +0000 (19:31 -0300)]
NFC: add the NFC socket raw protocol
This socket protocol is used to perform data exchange with NFC
targets.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:35 +0000 (19:31 -0300)]
NFC: add NFC socket family
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:34 +0000 (19:31 -0300)]
NFC: add nfc generic netlink interface
The NFC generic netlink interface exports the NFC control operations
to the user space.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:33 +0000 (19:31 -0300)]
NFC: add nfc subsystem core
The NFC subsystem core is responsible for providing the device driver
interface. It is also responsible for providing an interface to the control
operations and data exchange.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 1 Jul 2011 22:02:01 +0000 (00:02 +0200)]
mac80211: allow driver to impose WoWLAN restrictions
If the driver can't support WoWLAN in the current
state, this patch allows it to return 1 from the
suspend callback to do the normal deconfiguration
instead of using suspend/resume calls. Note that
if it does this, resume won't be called.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Fri, 1 Jul 2011 18:35:28 +0000 (22:35 +0400)]
ssb: PCI revision ID register is 8-bit wide
The SSB code reads PCI revision ID register as 16-bit entity while the register
is actually 8-bit only (the next 8 bits are the programming interface register).
Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well,
to match the register size.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Fri, 1 Jul 2011 13:56:11 +0000 (08:56 -0500)]
rtlwifi: rtl8192de: Fix error exit from hw_init
In routine rtl92de_hw_init(), there are two places where a failure is
not handled correctly.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Fri, 1 Jul 2011 13:50:48 +0000 (08:50 -0500)]
rtlwifi: rtl8192de: Replace loops calling udelay with single mdelay
There are a number of loops to implement delays. These are replaced with
single calls to mdelay().
The need for a fix was noted by Andrew Morton <akpm@linux-foundation.org>.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Fri, 1 Jul 2011 13:28:22 +0000 (15:28 +0200)]
carl9170: use carl9170 queue enums
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 30 Jun 2011 21:47:11 +0000 (16:47 -0500)]
rtlwifi: rtl8192de: Remove comparison of boolean with true
Tests of a boolean against "true" are not needed as non-zero is sufficient..
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mike McCormack [Thu, 30 Jun 2011 21:46:14 +0000 (16:46 -0500)]
rtlwifi: rtl8192{ce,cu,se} Remove irq_enabled
This should be unnecessary if synchronize_irq is used.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 30 Jun 2011 21:44:47 +0000 (16:44 -0500)]
rtlwifi: rtl8192de: Remove irq_enabled boolean
Prepare rtl8192de for the removal of irq_enaqbled.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andrew Morton [Thu, 30 Jun 2011 21:28:50 +0000 (16:28 -0500)]
drivers/net/wireless/rtlwifi/rtl8192de/phy.c: fix udelay() usage
ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko] undefined!
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 19:08:43 +0000 (21:08 +0200)]
mac80211: fix smatch complains
mlme.c
l.757 ieee80211_dynamic_ps_enable_work(11)
variable dereferenced before check 'sdata'
mesh_pathtbl.c
l.650 mesh_path_del(20) double lock 'bottom_half'
l.663 mesh_path_del(33) double unlock 'bottom_half'
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:34:54 +0000 (20:34 +0200)]
carl9170: allow PSM if the 5 GHz band is selected
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:31:34 +0000 (20:31 +0200)]
carl9170: enable IEEE80211_HW_NEED_DTIM_PERIOD
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:27:47 +0000 (20:27 +0200)]
carl9170: import 1.9.4 firmware headers
This patch imports all shared header changes
from carl9170fw.git.
* update copyright boilerplate
* add some more strategic __aligned(4).
* WoWLAN
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jesper Juhl [Wed, 29 Jun 2011 20:49:33 +0000 (22:49 +0200)]
net, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()
If the 'driver_initiated' function argument to
__cfg80211_stop_sched_scan() is not 0 then we'll return an
uninitialized 'err' from the function.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 28 Jun 2011 13:11:37 +0000 (18:41 +0530)]
mac80211: Skip tailroom reservation for full HW-crypto devices with race fix
Based on inputs from Johannes Berg <johannes@sipsolutions.net>
from http://article.gmane.org/gmane.linux.kernel.wireless.general/68193
and http://article.gmane.org/gmane.linux.kernel.wireless.general/71702
In xmit path, devices that do full hardware crypto (including
MMIC and ICV) need no tailroom. For such devices, tailroom
reservation can be skipped if all the keys are programmed into
the hardware (i.e software crypto is not used for any of the
keys) and none of the keys wants software to generate Michael
MIC and IV.
v2: Added check for IV along with MMIC.
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Fabio Rossi <rossi.f@inwind.it>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Cc: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
v3: Fixing races to avoid WARNING: at net/mac80211/wpa.c:397
ccmp_encrypt_skb+0xc4/0x1f0
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
v4: Added links with message ID
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Mon, 27 Jun 2011 19:06:34 +0000 (22:06 +0300)]
wl12xx: always initialize AP-mode max power level
Sometimes we only get the Tx power level via op->config when the FW is
off. Record the received power level when this happens and use it to
initialize the firmware during boot.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Mon, 27 Jun 2011 19:06:33 +0000 (22:06 +0300)]
wl12xx: initialize max_power levels for 11a channels
Set the maximum FW supported power levels for 11a channels.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:45 +0000 (13:06 +0300)]
wl12xx: implement cancel_hw_scan() callback
After implementing cancel_hw_scan(), there is no more need to
flush scan_complete_work on suspend.
scan_complete_work enqueues a new scan_work, that might lead
to the following warning (if the device was already suspended):
WARNING: at drivers/mmc/core/core.c:169 mmc_wait_for_req+0x1ac/0x2c8()
Backtrace:
[<
c004b50c>] (dump_backtrace+0x0/0x110)
[<
c04fda50>] (dump_stack+0x0/0x1c)
[<
c008f700>] (warn_slowpath_common+0x0/0x6c)
[<
c008f76c>] (warn_slowpath_null+0x0/0x2c)
[<
c034b058>] (mmc_wait_for_req+0x0/0x2c8)
[<
c034f804>] (mmc_io_rw_extended+0x0/0x1e4)
[<
c0350b5c>] (sdio_io_rw_ext_helper+0x0/0x1ac)
[<
c0350e00>] (sdio_memcpy_fromio+0x0/0x2c)
[<
bf194464>] (wl1271_sdio_raw_read+0x0/0x1bc [wl12xx_sdio])
[<
bf15ac14>] (wl1271_cmd_wait_for_event_or_timeout+0x0/0x19c [wl12xx])
[<
bf15adb0>] (wl1271_cmd_wait_for_event+0x0/0x30 [wl12xx])
[<
bf15b7dc>] (wl1271_cmd_disconnect+0x0/0x14c [wl12xx])
[<
bf158fd0>] (wl1271_unjoin+0x0/0x48 [wl12xx])
[<
bf159070>] (wl1271_op_config+0x0/0x490 [wl12xx])
[<
bf105084>] (ieee80211_hw_config+0x0/0x14c [mac80211])
[<
bf113120>] (ieee80211_recalc_idle+0x0/0x4c [mac80211])
[<
bf109a70>] (__ieee80211_scan_completed+0x0/0x1ac [mac80211])
[<
bf109fd4>] (ieee80211_scan_work+0x0/0x484 [mac80211])
[<
c00a197c>] (worker_thread+0x0/0x1e8)
[<
c00a5874>] (kthread+0x0/0x90)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:44 +0000 (13:06 +0300)]
wl12xx: add stop_scan command
define wl1271_scan_stop() to cancel an ongoing hw scan.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:43 +0000 (13:06 +0300)]
wl12xx: configure suspend/resume only if associated/started
Configure the device (to wowlan) only if the sta/ap
is associated/started.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Ohad Ben-Cohen [Sun, 26 Jun 2011 15:00:11 +0000 (18:00 +0300)]
wl12xx: one SDIO initialization is enough
Skip manual device power on in case runtime PM is enabled for
our device.
This eliminates a secondary & redundant SDIO init sequence.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Fri, 24 Jun 2011 10:03:37 +0000 (13:03 +0300)]
wl12xx: implement Tx watermarks per AC
Each AC is stopped when its queue is filled up to the high watermark,
and restarted when its queue it lower than the low watermark. This
ensures congested ACs are not able to starve other ACs.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Ido Yariv [Fri, 24 Jun 2011 10:03:36 +0000 (13:03 +0300)]
wl12xx: Increase low & high TX watermarks
The current TX watermark settings cause the driver to stop queues too
frequently. Among other things, this can have a negative impact on WMM
prioritization, since mac80211 sorts pending packets by their ACs.
Fix this by increasing the high watermark to 256 packets. Increase the
low watermark to 32 to minimize periods with queues being stopped.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Fri, 24 Jun 2011 10:03:35 +0000 (13:03 +0300)]
wl12xx: schedule TX packets according to FW occupancy
When selecting packets for transmission, prefer the ACs that are least
occupied in the FW. When packets for multiple ACs are present in the FW,
it decides which to transmit according to WMM QoS parameters.
With these changes, lower priority ACs should not be starved when higher
priority traffic is present.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Sun, 26 Jun 2011 07:36:04 +0000 (10:36 +0300)]
wl12xx: use 802.11 header location after relocation to frame start
When operating with TKIP encryption, the function wl1271_tx_fill_hdr()
relocates the 802.11 header to the start of the frame, and leaves room
for the security header.
Some functions in the Tx path rely on the location of the header,
namely, for purposes of roaming in STA mode and connecting new stations
in AP mode. Call these functions only after the header is relocated.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Sun, 26 Jun 2011 07:36:03 +0000 (10:36 +0300)]
wl12xx: AP mode - support FW TX inactivity triggers
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events.
Both are reported to the upper layers as a TX failure in the offending
stations.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Oz Krakowski [Sun, 26 Jun 2011 07:36:02 +0000 (10:36 +0300)]
wl12xx: fix Tx security sequence number handling
Do not reset the security sequence number when issuing a join command or
interface is removed. Instead, reset the counter only during the unjoin
command.
Added the notion of counter wrap-around to the LSB number in
wl1271_tx_complete_packet.
Added post recovery padding to adjust for potential security number
progress during the recovery process by the firmware and avoid
potential interop issues in encrypted networks.
Signed-off-by: Oz Krakowski <ozk@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Emmanuel Grumbach [Tue, 28 Jun 2011 20:13:59 +0000 (13:13 -0700)]
iwlagn: remove the indirection for the rx write pointer
Not needed since the driver split.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 1 Jul 2011 14:59:26 +0000 (07:59 -0700)]
iwlagn: remove hcmd ops
All "agn" devices use the same hcmd functions, no need to call indirectly.
remove hcmd_ops
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Tue, 28 Jun 2011 18:46:28 +0000 (11:46 -0700)]
iwlagn: call bt_coex directlly
Call the 2-wire and advanced bt-coex function directly to avoid mistake
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Tue, 28 Jun 2011 15:01:12 +0000 (08:01 -0700)]
iwlagn: scd memory boundary
Assign memory boundary for SCD context, tx status and translation table
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 28 Jun 2011 15:58:41 +0000 (08:58 -0700)]
iwlagn: move the tx allocation funcs to the transport layer
These functions allocate all the Tx context. Only the simple tx_init is exported as API.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 21 Jun 2011 11:25:45 +0000 (14:25 +0300)]
iwlagn: add rx_free to transport layer
The transport layer ness to release all rx ressources. This function is an API for it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 14 Jun 2011 07:13:24 +0000 (10:13 +0300)]
iwlagn: introduce transport layer and implement rx_init
The transport layer is responsible for all the queues, DMA rings etc...
This is the beginning of the separation of all the code that is tighly
related to HW design to the aforementioned transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Sat, 25 Jun 2011 16:17:41 +0000 (09:17 -0700)]
iwlagn: add module parameter to disable stuck queue watchdog timer
Add the parameter to disable stuck queue watchdog timer, different platforms
might have different timing. Provide the option to disable the timer to prevent
un-necessary firmware reload.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 1 Jul 2011 14:47:59 +0000 (07:47 -0700)]
iwlagn: add correct firmware name for 135 series
135 series are WiFi/BT combo and require different uCode from 105 series.
[A
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log