drm/fb-helper: Stop using mode_config.mutex for internals

Those are now all protected using fb_helper->lock.

v2: We still need to hold mode_config.mutex right around calling
connector->fill_modes.

v3: I forgot to hold mode_config.mutex while looking at
connector->status and the mode list. Also, we need to patch up the
i915 ->initial_config callback to grab the locks it needs to inspect
the modeset state recovered from the fw.

v4: Don't reorder the probe too much (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705045629.31265-1-daniel.vetter@ffwll.ch

drm/fb-helper: Push locking into restore_fbdev_mode_atomic|legacy

Same game as with the panning function, use drm_modeset_lock_all for
legacy paths, and a proper acquire ctx w/w mutex dance for atomic.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-8-daniel.vetter@ffwll.ch

drm/fb-helper: Push locking into pan_display_atomic|legacy

For the legacy path we'll keep drm_modeset_lock_all, for the atomic
one we drop the use of the magic implicit context and wire it up
properly.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-7-daniel.vetter@ffwll.ch

drm/fb-helper: Drop locking from the vsync wait ioctl code

Like with the drm-native vblank wait ioctl we can entirely rely on the
spinlocks in drm_vblank.c, no need at all to take expensive mutexes.
The only reason we had to take mode_config.mutex was to protect the
fbdev helper's data-structures, but that's now done by
fb_helper->lock.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-6-daniel.vetter@ffwll.ch

drm/fb-helper: Push locking in fb_is_bound

That function only needs to take the individual crtc locks, not all
the kms locks. Push down the locking and then minimize it.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-5-daniel.vetter@ffwll.ch

drm/fb-helper: Add top-level lock

Introduce a new top-level lock for the FB helper code. This will allow
better locking granularity and avoid the need to abuse modeset locking
for this purpose instead.

This patch just adds the new lock everywhere we currently grab
mode_config->mutex (explicitly, or through drm_modeset_lock_all).
Follow-up patches will push the kms locking down into only the places
that need it.

v2:
- use lockdep_assert_held
- use drm_fb_helper_for_each_connector where possible
- use the new top-level lock consistently, i.e. in all the places
  we're currently acquiring mode_config.mutex.
- small polish to the kerneldoc

Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-4-daniel.vetter@ffwll.ch

drm/i915: Drop FBDEV #ifdev in mst code

Since

commit a03fdcb1863297481a4b817c2a759cafcbdfa0ae
Author: Archit Taneja <architt@codeaurora.org>
Date:   Wed Aug 5 12:28:57 2015 +0530

    drm: Add top level Kconfig option for DRM fbdev emulation

this is properly handled using dummy functions. This essentially
undoes

commit 7296c849bf2eca2bd7d34a4686a53e3089150ac1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 22 20:10:28 2014 +1000

    drm/i915: fix build without fbde

v2: We also need to drop the #ifdef from headers. Seems like a small
price to pay for slightly cleaner code.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-3-daniel.vetter@ffwll.ch

drm/fb-helper: Push down modeset lock into FB helpers

Move the modeset locking from drivers into FB helpers.

v2: Also handle intel_connector_add_to_fbdev.

v3: Prevent race in intel_dp_mst with ->detect (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-2-daniel.vetter@ffwll.ch

drm: Remove pending_read_domains and pending_write_domain

The last user of these (i915.ko) no longer does. We can slim down the
core GEM object by removing the unused 8 bytes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705154900.28697-1-chris@chris-wilson.co.uk

drm/atomic-helper: Realign function parameters

Too jarring.

Fixes: f869a6ecf254 ("drm/atomic: Add target_vblank support in atomic helpers (v2)")
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627145936.18983-14-daniel.vetter@ffwll.ch

drm/fb-helper: Remove drm_mode_config_fb.

Remove drm_mode_config_fb, I don't see the point of it.
To make it clear that it's ok to use plane->fb directly,
move up drm_drv_uses_atomic_modeset so the code is skipped for atomic
drivers that require plane_state->fb.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170703115106.18783-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bochs: switch fb_ops over to use drm_fb_helper_cfb helpers

The current drm_fb_helper_sys helpers referenced in fb_ops assume that the
video memory is in system RAM. This is not the case for sparc which uses direct
physical memory accesses for IO memory and causes the bochs_drm module to panic
immediately upon startup as it tries to initialise the framebuffer.

Switching fb_ops over to use the drm_fb_helper_cfb helpers ensures that the
correct accesses are used on sparc, fixing the panic and allowing the
bochs_drm module to function under qemu-system-sparc64.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1499032363-8290-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: qxl: constify ttm_place structures.

ttm_place are not supposed to change at runtime. All functions
working with ttm_place provided by <drm/ttm/ttm_placement.h> work
with const ttm_place. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   3485     184     264    3933     f5d drivers/gpu/drm/qxl/qxl_ttm.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   3501     152     264    3917     f4d drivers/gpu/drm/qxl/qxl_ttm.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4f21d3bd2497129f084b8055ecf27f0d3ff1bba.1499013516.git.arvind.yadav.cs@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: ttm: virtio-gpu: dma-buf: Constify ttm_place structures.

ttm_place are not supposed to change at runtime. All functions
working with ttm_place provided by <drm/ttm/ttm_placement.h> work
with const ttm_place. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   2315     184       0    2499     9c3 drivers/gpu/drm/virtio/virtgpu_ttm.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   2347     152       0    2499     9c3 drivers/gpu/drm/virtio/virtgpu_ttm.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/25a189402a516a0142d9a4412da0a597c660a96a.1498981093.git.arvind.yadav.cs@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/udl: dma-buf: Constify dma_buf_ops structures.

dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   2002     112       0    2114     842 drivers/gpu/drm/udl/udl_dmabuf.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   2114       0       0    2114     842 drivers/gpu/drm/udl/udl_dmabuf.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/cb4dfac90e85e2270779331f8cb10b635042bad7.1498912415.git.arvind.yadav.cs@gmail.com

drm: armada: Constify drm_prop_enum_list structures.

drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   3594     176       0    3770     eba drivers/gpu/drm/armada/armada_overlay.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   3722      48       0    3770     eba drivers/gpu/drm/armada/armada_overlay.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dbeb176765bda8eaa9efdaa2dcd14c7bbae39cfa.1498905467.git.arvind.yadav.cs@gmail.com

drm: armada: constify drm_prop_enum_list structures.

drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   9629     744       0   10373    2885 drivers/gpu/drm/armada/armada_crtc.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   9757     616       0   10373    2885 drivers/gpu/drm/armada/armada_crtc.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d2344c4dc40238cfe48fa6d917767df0f053150a.1498902844.git.arvind.yadav.cs@gmail.com

drm/atomic: initial support for asynchronous plane update

In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.

This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.

For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.

v6: - move check code to drm_atomic_helper.c (Daniel Vetter)

v5:
- improve comments (Eric Anholt)

v4:
- fix state->crtc NULL check (Archit Taneja)

v3:
- fix iteration on the wrong crtc state
- put back code to forbid updates if there is a queued update for
the same plane (Ville Syrjälä)
- move size checks back to drivers (Ville Syrjälä)
- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)

v2:
- allow updates even if there is a queued update for the same
plane.
        - fixes on the documentation (Emil Velikov)
        - unconditionally call ->atomic_async_update (Emil Velikov)
        - check for ->atomic_async_update earlier (Daniel Vetter)
        - make ->atomic_async_check() the last step (Daniel Vetter)
        - add ASYNC_UPDATE flag (Eric Anholt)
        - update state in core after ->atomic_async_update (Eric Anholt)
- update docs (Eric Anholt)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v5)
Acked-by: Eric Anholt <eric@anholt.net> (v5)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630180322.29007-2-gustavo@padovan.org

drm/atomic: Drop helper include from drm_atomic.c

Core code should never have to look at helper stuff, to make sure that
all helper code is 100% optional and can be overriden.

Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630073921.2345-1-daniel.vetter@ffwll.ch

drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()

The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com

drm: Add old state pointer to CRTC .enable() helper function

The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com

dma-buf/sw-sync: Use an rbtree to sort fences in the timeline

Reduce the list iteration when incrementing the timeline by storing the
fences in increasing order.

v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk

dma-buf/sw-sync: Fix locking around sync_timeline lists

The sync_pt were not adding themselves atomically to the timeline lists,
corruption imminent.  Only a single list is required to track the
unsignaled sync_pt, so reduce it and rename the lock more appropriately
along with using idiomatic names to distinguish a list from links along
it.

v2: Prevent spinlock recursion on free during create (next patch) and
fixup crossref in kerneldoc

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629210532.5617-1-chris@chris-wilson.co.uk

dma-buf/sw-sync: sync_pt is private and of fixed size

Since sync_pt is only allocated from a single location and is no longer
the base class for fences (that is struct dma_fence) it no longer needs
a generic unsized allocator.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-5-chris@chris-wilson.co.uk

dma-buf/sw-sync: Reduce irqsave/irqrestore from known context

If we know the context under which we are called, then we can use the
simpler form of spin_lock_irq (saving the save/restore).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-4-chris@chris-wilson.co.uk

dma-buf/sw-sync: Prevent user overflow on timeline advance

The timeline is u32, which limits any single advance to INT_MAX so that
we can detect all fences that need signaling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-3-chris@chris-wilson.co.uk

dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound

Use the canonical __dma_fence_is_later() to compare the fence seqno
against the timeline seqno to check if the fence is signaled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-2-chris@chris-wilson.co.uk

dma-buf/dma-fence: Extract __dma_fence_is_later()

Often we have the task of comparing two seqno known to be on the same
context, so provide a common __dma_fence_is_later().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-1-chris@chris-wilson.co.uk

drm/gma500: remove an unneeded NULL check

"connector" is the list iterator and it can't be NULL.  It causes a
static checker warning because we dereference the iterator to get the
next item in the list.  Let's remove this check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628124100.3pw2gyitsfopaib5@mwanda

drm: vmwgfx: Replace CRTC .commit() helper operation with .enable()

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. Replace the .commit() helper operation
with .enable() in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-6-laurent.pinchart+renesas@ideasonboard.com

drm: vmwgfx: Remove unneeded CRTC .prepare() helper operation

The CRTC .prepare() helper operation is part of the legacy helpers and
is deprecated in favour of the .disable() helper operation. As the
vmwgfx driver provides a .disable() helper operation, and as the
.prepare() helper operation implementation is empty, we can remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-5-laurent.pinchart+renesas@ideasonboard.com

drm: qxl: Replace CRTC .commit() helper operation with .enable()

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. Replace the .commit() helper operation
with .enable() in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-4-laurent.pinchart+renesas@ideasonboard.com

drm: qxl: Remove unused CRTC .dpms() helper operation

The CRTC .dpms() helper operation is called by the atomic helpers only
when no .prepare(), .atomic_disable() or .disable() operation is
provided. As the qxl driver provides a .disable() operation, the .dpms()
operation is unused and can be removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-3-laurent.pinchart+renesas@ideasonboard.com

drm: arcpgu: Remove CRTC .prepare() helper operation

The CRTC helper .prepare() operation is legacy code, the atomic helpers
prefer the .disable() operation. As the arcpgu driver implements the
.disable() and .prepare() operations identicallly, .prepare() can be
removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-2-laurent.pinchart+renesas@ideasonboard.com

drm: arcpgu: Remove CRTC .commit() helper operation

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. As the arcpgu driver implements the
.enable() operation, .commit() is never used and can be removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-1-laurent.pinchart+renesas@ideasonboard.com

drm/vblank: Unexport drm_vblank_cleanup

There's no reason for drivers to call this, and all the ones I've
removed looked very fishy:
- Proper quiescenting of the vblank machinery should be done by
  calling drm_crtc_vblank_off(), which is best done by shutting down
  the entire display engine with drm_atomic_helper_shutdown.

- Releasing of allocated memory is done by the core already, it calls
  drm_vblank_cleanup as a fallback.

- drm_vblank_cleanup also has checks for drivers which forget to clean
  up vblank interrupts.

This essentially reverts

commit e77cef9c2d87db835ad9d70cde4a9b00b0ca2262
Author: Jerome Glisse <jglisse@redhat.com>
Date:   Thu Jan 7 15:39:13 2010 +0100

    drm: Avoid calling vblank function is vblank wasn't initialized

which was done to fix a bug in radeon code with msi interrupts:

commit 003e69f9862bcda89a75c27750efdbc17ac02945
Author: Jerome Glisse <jglisse@redhat.com>
Date:   Thu Jan 7 15:39:14 2010 +0100

    drm/radeon/kms: Don't try to enable IRQ if we have no handler installed

Afaict from digging around in old code, this was needed to avoid
blowing up in the ums fallback, and has stopped serving it's purpose
long ago - if irq init fails, the driver fails to load, and there's
really no way to blow up anymore.

Long story short, this was most likely a small ums compat/fallback
hack that became a thing of it's own and got cargo-cult duplicated all
over the drm codebase for essentially no gain at all.

v2: Mention that for drivers with a ->release callback cleanup is
handled by drm_dev_fini() (Thierry).

Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626161949.25629-2-daniel.vetter@ffwll.ch

drm/hdlcd: remove drm_vblank_cleanup, rise of the zoombies edition

This was accidentally restored in

commit de5cc8155cd250a31da67dea49aff7637ce98887
Author: Liviu Dudau <Liviu.Dudau@arm.com>
Date:   Tue Jun 6 15:05:21 2017 +0100

    drm/arm: hdlcd: Set the CRTC's port before binding the encoder

Fixes: de5cc8155cd2 ("drm/arm: hdlcd: Set the CRTC's port before binding the encoder.")
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628091141.14539-1-daniel.vetter@ffwll.ch

drm/core: Fail atomic IOCTL with no CRTC state but with signaling.

Problem : While running IGT kms_atomic_transition test suite i encountered
a hang in drmHandleEvent immediately following  an atomic_commit.
After dumping the atomic state I relized that in this case there was
not even one CRTC attached to the state and only disabled
planes. This probably due to a commit which hadn't changed any property
which would require attaching crtc state. This means drmHandleEvent
will never wake up from read since without CRTC in atomic state
the event fd will not be signaled.

Fix: Protect against this issue by failing atomic_commit early in
drm_mode_atomic_commit where such probelm can be identified.

v2:
Fix typos and extra newlines.

Change-Id: I3ee28ffae35fd1e8bfe553146c44da53da02e6f8
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497981426-27203-1-git-send-email-Andrey.Grodzovsky@amd.com

Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next

Required for Daniel's drm_vblank_cleanup cleanup

drm/atomic-helper: Simplify commit tracking locking

The crtc->commit_lock only protects commit_list and commit_entry. If
we chase the pointer from the drm_atomic_state update structure, then
we don't need any locks (since we hold a reference already).

Simplify the locking accordingly.

Noticed while reviewing a patch from Boris.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621091627.30837-1-daniel.vetter@ffwll.ch

drm/vmwgfx: Drop drm_vblank_cleanup

Again stopping the vblank before uninstalling the irq handler is kinda
the wrong way round, but the fb_off stuff should take care of
disabling the dsiplay at least in most cases. So drop the
drm_vblank_cleanup code since it's not really doing anything, it looks
all cargo-culted.

v2: Appease gcc better.

v3: Simplify code (Sean Paul)

Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626161949.25629-1-daniel.vetter@ffwll.ch

Backmerge tag 'v4.12-rc7' into drm-next

Linux 4.12-rc7

Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7

drm/udl: Drop drm_vblank_cleanup

udl doesn't shut down the display, so stopping the vblank isn't going
to do much good either. Just drop it.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-11-daniel.vetter@ffwll.ch

drm/rockchip: Drop drm_vblank_cleanup

Either not relevant (in the load error paths) or done better already
(in the unload code, by calling drm_atomic_helper_shutdown). Drop it.

Cc: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-9-daniel.vetter@ffwll.ch

drm/nouveau: Drop drm_vblank_cleanup

nouveau_display_vblank_fini is called in the load error path (where it
doesn't matter) and module unload (where vblanks have been shut down
correctly already through drm_vblank_off), we can drop it.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-8-daniel.vetter@ffwll.ch

drm/mtk: Drop drm_vblank_cleanup

Seems entirely cargo-culted.

Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-6-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-7-daniel.vetter@ffwll.ch

drm/i915: Drop drm_vblank_cleanup

On the load error path we can't have pending vblank interrupts, and on
unload we already call drm_atomic_helper_shutdown beforehand! So all
good to nuke it.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-5-daniel.vetter@ffwll.ch

drm/kirin: Drop drm_vblank_cleanup

Again we probably want a drm_atomic_helper_shutdown somewhere, but
that's a bit more analysis.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-4-daniel.vetter@ffwll.ch

drm/hibmc: Drop drm_vblank_cleanup

So this seems to be the first driver that does it the right way round,
so fix it up by calling drm_atomic_helper_shutdown instead. We need to
do that before the last kms user is gone (fbdev emulation), but before
we start shutting down hw stuff like interrupts.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-3-daniel.vetter@ffwll.ch

Linux 4.12-rc7

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "A single fix to unbreak the vdso32 build for 64bit kernels caused by
  excess #includes in the mshyperv header"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mshyperv: Remove excess #includes from mshyperv.h

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timekeeping and timers:

   - Plug a subtle race due to a missing READ_ONCE() in the timekeeping
     code where reloading of a pointer results in an inconsistent
     callback argument being supplied to the clocksource->read function.

   - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
     time keeping core code, to prevent a possible discontuity.

   - Apply a similar fix to the arm64 vdso clock_gettime()
     implementation

   - Add missing includes to clocksource drivers, which relied on
     indirect includes which fails in certain configs.

   - Use the proper iomem pointer for read/iounmap in a probe function"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
  time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
  time: Fix clock->read(clock) race around clocksource changes
  clocksource: Explicitly include linux/clocksource.h when needed
  clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "Three fixlets for perf:

   - Return the proper error code if aux buffers for a event are not
     supported.

   - Calculate the probe offset for inlined functions correctly

   - Update the Skylake DTLB load/store miss event so it can count 1G
     TLB entries as well"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Fix probe definition for inlined functions
  perf/x86/intel: Add 1G DTLB load/store miss support for SKL
  perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
 "A single fix for the MIPS GIC to prevent ftrace recursion"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Mark count and compare accessors notrace

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a quirk to i8042 to ignore timeout bit on Lifebook AH544

 - a fixup to Synaptics RMI function 54 that was breaking some Dells

 - a fix for memory leak in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - only read the F54 query registers which are used
  Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
  Input: soc_button_array - fix leaking the ACPI button descriptor buffer

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the target-pending fixes for v4.12-rc7 that have been queued
  up for the last 2 weeks. This includes:

   - Fix a TMR related kref underflow detected by the recent refcount_t
     conversion in upstream.

   - Fix a iscsi-target corner case during explicit connection logout
     timeout failure.

   - Address last fallout in iscsi-target immediate data handling from
     v4.4 target-core now allowing control CDB payload underflow"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Reject immediate data underflow larger than SCSI transfer length
  iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
  target: Fix kref->refcount underflow in transport_cmd_finish_abort

Merge tag 'kbuild-fixes-v4.12-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
 "Nothing scary, just some random fixes:

   - fix warnings of host programs

   - fix "make tags" when COMPILED_SOURCE=1 is specified along with O=

   - clarify help message of C=1 option

   - fix dependency for ncurses compatibility check

   - fix "make headers_install" for fakechroot environment"

* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix sparse warnings in nconfig
  kbuild: fix header installation under fakechroot environment
  kconfig: Check for libncurses before menuconfig
  Kbuild: tiny correction on `make help`
  tags: honor COMPILED_SOURCE with apart output directory
  genksyms: add printf format attribute to error_with_pos()

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull timer fix from Eric Biederman:
 "This fixes an issue of confusing injected signals with the signals
  from posix timers that has existed since posix timers have been in the
  kernel.

  This patch is slightly simpler than my earlier version of this patch
  as I discovered in testing that I had misspelled "#ifdef
  CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
  setting of resched_timer uncondtional.

  I have tested this and verified that without this patch there is a
  nasty hang that is easy to trigger, and with this patch everything
  works properly"

Thomas Gleixner dixit:
 "It fixes the problem at hand and covers the ptrace case as well, which
  I missed.

Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Only reschedule timers on signals timers have sent

x86/mshyperv: Remove excess #includes from mshyperv.h

A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.

The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.

Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.

Remove the includes and unbreak the build.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'powerpc-4.12-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.12. Most of these actually came in last
  week but got held up for some more testing.

   - three fixes for kprobes/ftrace/livepatch interactions.

   - properly handle data breakpoints when using the Radix MMU.

   - fix for perf sampling of registers during call_usermodehelper().

   - properly initialise the thread_info on our emergency stacks

   - add an explicit flush when doing TLB invalidations for a process
     using NPU2.

  Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
  Bangoria, Masami Hiramatsu"

* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Initialise thread_info for emergency stacks
  powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
  powerpc/perf: Fix oops when kthread execs user process
  powerpc/64s: Handle data breakpoints in Radix mode
  powerpc/kprobes: Skip livepatch_handler() for jprobes
  powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
  powerpc/kprobes: Pause function_graph tracing during jprobes handling

Merge tag 'acpi-4.12-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "This fixes the ACPI-based enumeration of some I2C and SPI devices
  broken in 4.11.

  Specifics:

   - I2C and SPI devices are expected to be enumerated by the I2C and
     SPI subsystems, respectively, but due to a change made during the
     4.11 cycle, in some cases the ACPI core marks them as already
     enumerated which causes the I2C and SPI subsystems to overlook
     them, so fix that (Jarkko Nikula)"

* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Fix enumeration for special SPI and I2C devices

Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang.

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Use correct function to write to register

Merge tag 'gpio-v4.12-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
 "A single GPIO patch fixing the compatible string for the MVEBU PWM
  controller embedded in the GPIO controller before we release v4.12.
  Hopefully"

* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: change compatible string for PWM support

Merge tag 'sound-4.12-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing exciting here, just a few stable fixes:

   - suppress spurious kernel WARNING in PCM core

   - fix potential spin deadlock at error handling in firewire

   - HD-audio PCI ID addition / fixup"

* tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Apply quirks to Broxton-T, too
  ALSA: firewire-lib: Fix stall of process context at packet error
  ALSA: pcm: Don't treat NULL chmap as a fatal error
  ALSA: hda - Add Coffelake PCI ID

Merge tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A varied bunch of fixes, one for an API regression with connectors.

  Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
  ones being the most important"

* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm: Fix GETCONNECTOR regression
  drm/radeon: add a quirk for Toshiba Satellite L20-183
  drm/radeon: add a PX quirk for another K53TK variant
  drm/amdgpu: adjust default display clock
  drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
  drm/amdgpu: add Polaris12 DID
  drm/i915: Don't enable backlight at setup time.
  drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
  drm/i915: Fix deadlock witha the pipe A quirk during resume
  drm/i915: Remove __GFP_NORETRY from our buffer allocator
  drm/i915: Encourage our shrinker more when our shmemfs allocations fails
  drm/i915: Differentiate between sw write location into ring and last hw read

Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random

Pull random fixes from Ted Ts'o:
 "Fix some locking and gcc optimization issues from the most recent
  random_for_linus_stable pull request"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: silence compiler warnings and fix race

Merge tag 'for-4.12/dm-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - a revert of a DM mirror commit that has proven to make the code prone
   to crash

 - a DM io reference count fix that resolves a NULL pointer seen when
   issuing discards to a DM mirror target's device whose mirror legs do
   not all support discards

 - a couple DM integrity fixes

* tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm io: fix duplicate bio completion due to missing ref count
  dm integrity: fix to not disable/enable interrupts from interrupt context
  Revert "dm mirror: use all available legs on multiple failures"
  dm integrity: reject mappings too large for device

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  fs/exec.c: account for argv/envp pointers
  ocfs2: fix deadlock caused by recursive locking in xattr
  slub: make sysfs file removal asynchronous
  lib/cmdline.c: fix get_options() overflow while parsing ranges
  fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
  autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
  mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
  mm, thp: remove cond_resched from __collapse_huge_page_copy

fs/exec.c: account for argv/envp pointers

When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included.  This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.

For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).

The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely.  Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).

[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix deadlock caused by recursive locking in xattr

Another deadlock path caused by recursive locking is reported.  This
kind of issue was introduced since commit 743b5f1434f5 ("ocfs2: take
inode lock in ocfs2_iop_set/get_acl()").  Two deadlock paths have been
fixed by commit b891fa5024a9 ("ocfs2: fix deadlock issue when taking
inode lock at vfs entry points").  Yes, we intend to fix this kind of
case in incremental way, because it's hard to find out all possible
paths at once.

This one can be reproduced like this.  On node1, cp a large file from
home directory to ocfs2 mountpoint.  While on node2, run
setfacl/getfacl.  Both nodes will hang up there.  The backtraces:

On node1:
  __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
  ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
  ocfs2_write_begin+0x43/0x1a0 [ocfs2]
  generic_perform_write+0xa9/0x180
  __generic_file_write_iter+0x1aa/0x1d0
  ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2]
  __vfs_write+0xc3/0x130
  vfs_write+0xb1/0x1a0
  SyS_write+0x46/0xa0

On node2:
  __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
  ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
  ocfs2_xattr_set+0x12e/0xe80 [ocfs2]
  ocfs2_set_acl+0x22d/0x260 [ocfs2]
  ocfs2_iop_set_acl+0x65/0xb0 [ocfs2]
  set_posix_acl+0x75/0xb0
  posix_acl_xattr_set+0x49/0xa0
  __vfs_setxattr+0x69/0x80
  __vfs_setxattr_noperm+0x72/0x1a0
  vfs_setxattr+0xa7/0xb0
  setxattr+0x12d/0x190
  path_setxattr+0x9f/0xb0
  SyS_setxattr+0x14/0x20

Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is
exported by commit 439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic
to avoid recursive cluster lock").

Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com
Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Eric Ren <zren@suse.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make sysfs file removal asynchronous

Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from
sysfs_slab_remove()") made slub sysfs file removals synchronous to
kmem_cache shutdown.

Unfortunately, this created a possible ABBA deadlock between slab_mutex
and sysfs draining mechanism triggering the following lockdep warning.

  ======================================================
  [ INFO: possible circular locking dependency detected ]
  4.10.0-test+ #48 Not tainted
  -------------------------------------------------------
  rmmod/1211 is trying to acquire lock:
   (s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40

  but task is already holding lock:
   (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (slab_mutex){+.+.+.}:
 lock_acquire+0xf6/0x1f0
 __mutex_lock+0x75/0x950
 mutex_lock_nested+0x1b/0x20
 slab_attr_store+0x75/0xd0
 sysfs_kf_write+0x45/0x60
 kernfs_fop_write+0x13c/0x1c0
 __vfs_write+0x28/0x120
 vfs_write+0xc8/0x1e0
 SyS_write+0x49/0xa0
 entry_SYSCALL_64_fastpath+0x1f/0xc2

  -> #0 (s_active#120){++++.+}:
 __lock_acquire+0x10ed/0x1260
 lock_acquire+0xf6/0x1f0
 __kernfs_remove+0x254/0x320
 kernfs_remove+0x23/0x40
 sysfs_remove_dir+0x51/0x80
 kobject_del+0x18/0x50
 __kmem_cache_shutdown+0x3e6/0x460
 kmem_cache_destroy+0x1fb/0x2d0
 kvm_exit+0x2d/0x80 [kvm]
 vmx_exit+0x19/0xa1b [kvm_intel]
 SyS_delete_module+0x198/0x1f0
 entry_SYSCALL_64_fastpath+0x1f/0xc2

  other info that might help us debug this:

   Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
    lock(slab_mutex);
 lock(s_active#120);
 lock(slab_mutex);
    lock(s_active#120);

   *** DEADLOCK ***

  2 locks held by rmmod/1211:
   #0:  (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80
   #1:  (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0

  stack backtrace:
  CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48
  Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
  Call Trace:
   print_circular_bug+0x1be/0x210
   __lock_acquire+0x10ed/0x1260
   lock_acquire+0xf6/0x1f0
   __kernfs_remove+0x254/0x320
   kernfs_remove+0x23/0x40
   sysfs_remove_dir+0x51/0x80
   kobject_del+0x18/0x50
   __kmem_cache_shutdown+0x3e6/0x460
   kmem_cache_destroy+0x1fb/0x2d0
   kvm_exit+0x2d/0x80 [kvm]
   vmx_exit+0x19/0xa1b [kvm_intel]
   SyS_delete_module+0x198/0x1f0
   ? SyS_delete_module+0x5/0x1f0
   entry_SYSCALL_64_fastpath+0x1f/0xc2

It'd be the cleanest to deal with the issue by removing sysfs files
without holding slab_mutex before the rest of shutdown; however, given
the current code structure, it is pretty difficult to do so.

This patch punts sysfs file removal to a work item.  Before commit
bf5eb3de3847, the removal was punted to a RCU delayed work item which is
executed after release.  Now, we're punting to a different work item on
shutdown which still maintains the goal removing the sysfs files earlier
when destroying kmem_caches.

Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org
Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline.c: fix get_options() overflow while parsing ranges

When using get_options() it's possible to specify a range of numbers,
like 1-100500.  The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/dax.c: fix inefficiency in dax_writeback_mapping_range()

dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing.  Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks.  Update index properly.

Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes: 9973c98ecfda3 ("dax: add support for fsync/sync")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return

   ERR_PTR(status)

with that status to follow_automount(), which will then dereference an
invalid pointer.

So treat a positive status the same as zero, and map to ENOENT.

See comment in systemd src/core/automount.c::automount_send_ready().

Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings

Existing code that uses vmalloc_to_page() may assume that any address
for which is_vmalloc_addr() returns true may be passed into
vmalloc_to_page() to retrieve the associated struct page.

This is not un unreasonable assumption to make, but on architectures
that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need
to ensure that vmalloc_to_page() does not go off into the weeds trying
to dereference huge PUDs or PMDs as table entries.

Given that vmalloc() and vmap() themselves never create huge mappings or
deal with compound pages at all, there is no correct answer in this
case, so return NULL instead, and issue a warning.

When reading /proc/kcore on arm64, you will hit an oops as soon as you
hit the huge mappings used for the various segments that make up the
mapping of vmlinux.  With this patch applied, you will no longer hit the
oops, but the kcore contents willl be incorrect (these regions will be
zeroed out)

We are fixing this for kcore specifically, so it avoids vread() for
those regions.  At least one other problematic user exists, i.e.,
/dev/kmem, but that is currently broken on arm64 for other reasons.

Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: remove cond_resched from __collapse_huge_page_copy

This is a partial revert of commit 338a16ba1549 ("mm, thp: copying user
pages must schedule on collapse") which added a cond_resched() to
__collapse_huge_page_copy().

On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in
atomic context and thus scheduling is not possible.  This is only a
possible config on arm and i386.

Although need_resched has been shown to be set for over 100 jiffies
while doing the iteration in __collapse_huge_page_copy, this is better
than doing

if (in_atomic())
cond_resched()

to cover only non-CONFIG_HIGHPTE configs.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.

  The driver already prints a warning message, there's no need to panic
  users by printing something that looks like an oops as well"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Remove WARN_ON from clear task context.
  scsi: qedi: Remove WARN_ON for untracked cleanup.

Merge tag 'xfs-4.12-fixes-5' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "I have one more bugfix for you for 4.12-rc7 to fix a disk corruption
  problem:

   - don't allow swapon on files on the realtime device, because the
     swap code will swap pages out to blocks on the data device, thereby
     corrupting the filesystem"

* tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't allow bmap on rt files

drm/vgem: Pin our pages for dmabuf exports

When the caller maps their dmabuf and we return an sg_table, the caller
doesn't expect the pages beneath that sg_table to vanish on a whim (i.e.
under mempressure). The contract is that the pages are pinned for the
duration of the mapping (from dma_buf_map_attachment() to
dma_buf_unmap_attachment). To comply, we need to introduce our own
vgem_object.pages_pin_count and elevate it across the mapping. However,
the drm_prime interface we use calls drv->prime_pin on dma_buf_attach
and drv->prime_unpin on dma_buf_detach, which while that does cover the
mapping is much broader than is desired -- but it will do for now.

v2: also hold the pin across prime_vmap/vunmap

Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Testcase: igt/gem_concurrent_blit/*swap*vgem*
Fixes: 5ba6c9ff961a ("drm/vgem: Fix mmaping")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # needs a backport
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622134617.17912-1-chris@chris-wilson.co.uk

drm: arcpgu: arc_pgu_crtc_mode_valid() can be static

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170623095418.GA68865@lkp-sbx04

drm/mxsfb: Drop drm_vblank_cleanup

Almost right but still racy, it's called before the interrupts are
uninstalled. So let's just drop it.

Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-7-daniel.vetter@ffwll.ch

drm/amd|radeon: Drop drm_vblank_cleanup

Both drivers shut down all crtc beforehand already, which will shut up
any pending vblank (the only thing vblank_cleanup really does is
disable the disable timer). Hence we don't need this here and can
remove it.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-2-daniel.vetter@ffwll.ch

drm/qxl: move extern variable declaration header file

Flagged by sparse.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620113916.6967-4-kraxel@redhat.com

drm/qxl: declare a bunch of functions as static

Flagged by sparse.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620113916.6967-3-kraxel@redhat.com

drm/qxl: fix __user annotations

Drop them from u64 fields, tag local variables correctly instead.
While being at it switch the code to use u64_to_user_ptr().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620113916.6967-2-kraxel@redhat.com

Merge tag 'perf-urgent-for-mingo-4.12-20170622' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull 'perf probe' fix from Arnaldo Carvalho de Melo:

 - Do not double the offset of inline expansions when using
   'perf probe' on inlined functions (Björn Töpel)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Input: synaptics-rmi4 - only read the F54 query registers which are used

The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.

Previous issues with the I2C controller or touchpad were addressed in:
commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report")

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'hdlcd-for-v4.13-v3' of git://linux-arm.org/linux-ld into drm-next

hdlcd fixes.

* tag 'hdlcd-for-v4.13-v3' of git://linux-arm.org/linux-ld:
  drm/arm: hdlcd: remove unused variables
  drm/arm: hdlcd: Use CMA helper for plane buffer address calculation
  drm/arm: hdlcd: Set the CRTC's port before binding the encoder.

powerpc/64: Initialise thread_info for emergency stacks

Emergency stacks have their thread_info mostly uninitialised, which in
particular means garbage preempt_count values.

Emergency stack code runs with interrupts disabled entirely, and is
used very rarely, so this has been unnoticed so far. It was found by a
proposed new powerpc watchdog that takes a soft-NMI directly from the
masked_interrupt handler and using the emergency stack. That crashed
at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be
garbage.

To fix this, zero the entire THREAD_SIZE allocation, and initialize
the thread_info.

Cc: stable@vger.kernel.org
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move it all into setup_64.c, use a function not a macro. Fix
      crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

UAPI Changes:
- drm: Fix regression in GETCONNECTOR ioctl returning stale properties (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc:
  drm: Fix GETCONNECTOR regression

drm/rockchip: dw_hdmi: introduce the pclk for grf

For RK3399's GRF module, if we want to operate the graphic related grf
registers, we need to enable the pclk_vio_grf which supply power for VIO
GRF IOs, so it's better to introduce an optional grf clock in driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

drm/rockchip: dw_hdmi: introduce the VPLL clock setting

For RK3399 HDMI, there is an external clock need for HDMI PHY,
and it should keep the same clock rate with VOP DCLK.

VPLL have supported the clock for HDMI PHY, but there is no
clock divider bewteen VPLL and HDMI PHY. So we need to set the
VPLL rate manually in HDMI driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

drm/rockchip: dw_hdmi: add RK3399 HDMI support

RK3399 and RK3288 shared the same HDMI IP controller, only some light
difference with GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

kconfig: fix sparse warnings in nconfig

Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):

../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer

nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

drm: atmel-hlcdc: add support for 8-bit color lookup table mode

All layers of all supported chips support this, the only variable is the
base address of the lookup table in the register map.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-3-git-send-email-peda@axentia.se

drm: atmel-hlcdc: add missing .set_property helper to the crtc

The default implementation should be used.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-2-git-send-email-peda@axentia.se

perf probe: Fix probe definition for inlined functions

In commit 613f050d68a8 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.

Prior this patch:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626

After:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665

Committer testing:

Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:

  # pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
  __ew32
  e1000_regdump
  e1000e_dump_ps_pages
  e1000_desc_unused
  e1000e_systim_to_hwtstamp
  e1000e_rx_hwtstamp
  e1000e_update_rdt_wa
  e1000e_update_tdt_wa
  e1000_put_txbuf
  e1000_consume_page

Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:

  $ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
  <SNIP>
  <1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
    <13e27c>   DW_AT_name        : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
    <13e287>   DW_AT_low_pc      : 0x17a30
  <3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e6f0>   DW_AT_abstract_origin: <0x13ed2c>
    <13e6f4>   DW_AT_low_pc      : 0x17be6
  <SNIP>
  <1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
     <13ed2e>   DW_AT_name        : (indirect string, offset: 0xa54c3): e1000_consume_page

So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:

  0x17be6 - 0x17a30 = 438

but above we have 876, which is twice as much.

Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

  <3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e86f>   DW_AT_abstract_origin: <0x13ed2c>
    <13e873>   DW_AT_low_pc      : 0x17d21

  0x17d21 - 0x17a30 = 753

So we where adding it at twice the offset from the containing function as we
should.

And then after this patch:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
  #

Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:

  readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
   673: 0000000000017a30  1626 FUNC    LOCAL  DEFAULT    2 e1000_clean_jumbo_rx_irq
   674: 0000000000018090  2013 FUNC    LOCAL  DEFAULT    2 e1000_clean_rx_irq_ps

This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

   <3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13ec78>   DW_AT_abstract_origin: <0x13ed2c>
    <13ec7c>   DW_AT_low_pc      : 0x17f79

  0x17f79 - 0x17a30 = 1353

 So:

   0x17a30 + 2 * 1353 = 0x184c2

  And:

   0x184c2 - 0x18090 = 1074

Which explains the bogus third expansion for e1000_consume_page() to end up at:

   p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

All fixed now :-)

[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 613f050d68a8 ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Various small fixes for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix some return values in case of error in 'crypt_message'
  cifs: remove redundant return in cifs_creation_time_get
  CIFS: Improve readdir verbosity
  CIFS: check if pages is null rather than bv for a failed allocation
  CIFS: Set ->should_dirty in cifs_user_readv()

drm/vc4: Remove dead vc4_event_pending().

It is no longer used as of commit 34c8ea400ff6 ("drm/vc4: Mimic
drm_atomic_helper_commit() behavior")

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-4-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm/vc4: Use the atomic state's commit workqueue.

Now that we're using the atomic helpers for fence waits, we can use
the same codepath as drm_atomic_helper_commit() does for async,
getting rid of our custom vc4_commit struct.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-3-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>