GitHub/mt8127/android_kernel_alcatel_ttab.git
17 years ago[MAC80211]: rename ieee80211_cfg.h to cfg.h
Michael Wu [Tue, 18 Sep 2007 21:29:21 +0000 (17:29 -0400)]
[MAC80211]: rename ieee80211_cfg.h to cfg.h

Might as well rename ieee80211_cfg.h to cfg.h to keep things consistent.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: kill vlan_id
Johannes Berg [Tue, 18 Sep 2007 21:29:21 +0000 (17:29 -0400)]
[MAC80211]: kill vlan_id

Each station has a vlan_id that is useless. Remove it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: kill IE parse typedef
Johannes Berg [Tue, 18 Sep 2007 21:29:21 +0000 (17:29 -0400)]
[MAC80211]: kill IE parse typedef

The parse result typedef isn't needed.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: rename ieee80211_cfg.c to cfg.c
Johannes Berg [Tue, 18 Sep 2007 21:29:20 +0000 (17:29 -0400)]
[MAC80211]: rename ieee80211_cfg.c to cfg.c

It's just painful to have the extra ieee80211_ prefix.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: print out wiphy name instead of master device
Johannes Berg [Tue, 18 Sep 2007 21:29:20 +0000 (17:29 -0400)]
[MAC80211]: print out wiphy name instead of master device

This makes mac80211 print out the wiphy name instead of the
master device name where appropriate.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: remove tx info sw_retry_attempt member
Johannes Berg [Tue, 18 Sep 2007 21:29:20 +0000 (17:29 -0400)]
[MAC80211]: remove tx info sw_retry_attempt member

This is unused.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: fix warnings introduced by the doc patches
Johannes Berg [Tue, 18 Sep 2007 21:29:20 +0000 (17:29 -0400)]
[MAC80211]: fix warnings introduced by the doc patches

This fixes a warning about NUM_IEEE80211_MODES missing
in a switch statement. Intentionally do not add a default
case so we get warnings at these places if we need to add
new modes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: yet more documentation
Johannes Berg [Tue, 18 Sep 2007 21:29:20 +0000 (17:29 -0400)]
[MAC80211]: yet more documentation

Add more mac80211 documentation.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: remove IEEE80211_CONF_SSID_HIDDEN
Johannes Berg [Mon, 17 Sep 2007 05:29:26 +0000 (01:29 -0400)]
[MAC80211]: remove IEEE80211_CONF_SSID_HIDDEN

The IEEE80211_CONF_SSID_HIDDEN setting is not useful for any driver
we have and should be a per-interface setting anyway. Remove it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: remove key threshold stuff
Johannes Berg [Mon, 17 Sep 2007 05:29:25 +0000 (01:29 -0400)]
[MAC80211]: remove key threshold stuff

This patch removes the key threshold stuff from mac80211.
I have patches for later that add it as a per-key setting
to nl/cfg80211.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: allow drivers to indicate failed FCS/PLCP checksum
Johannes Berg [Mon, 17 Sep 2007 05:29:22 +0000 (01:29 -0400)]
[MAC80211]: allow drivers to indicate failed FCS/PLCP checksum

This patch allows drivers to indicate bad FCS/PLCP CRC to the stack and
have the stack drop packets like that except for monitor interfaces.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[LIBERTAS]: fix oops on the blackfin architecture
Vladimir Davydov [Fri, 7 Sep 2007 01:45:36 +0000 (21:45 -0400)]
[LIBERTAS]: fix oops on the blackfin architecture

Fixing memory alignment problems on the blackfin architecture (maybe on the
ARM also)

Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[LIBERTAS]: fix oops on the blackfin architecture
Vladimir Davydov [Fri, 7 Sep 2007 01:41:02 +0000 (21:41 -0400)]
[LIBERTAS]: fix oops on the blackfin architecture

Reserve two bytes to align pointer to the IP header.

Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[LIBERTAS]: fix interrupts in CF driver
Ryan Mallon [Fri, 7 Sep 2007 01:32:42 +0000 (21:32 -0400)]
[LIBERTAS]: fix interrupts in CF driver

The following patch fixes the tx transmit timeout problem, which is
caused by the interrupts being incorrectly check and masked. The patch
moves the interrupt masking code so that interrupts are enabled only
when the driver is registered and only disabled when the driver is
unregistered.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[LIBERTAS]: set dnld_sent correctly for CF parts
Ryan Mallon [Fri, 7 Sep 2007 01:30:32 +0000 (21:30 -0400)]
[LIBERTAS]: set dnld_sent correctly for CF parts

Corrects a minor bug with priv->dnld_sent being set incorrectly in
if_cs_host_to_card.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43LEGACY]: Change the hardware radio enable logic and cleanup code
Larry Finger [Fri, 21 Sep 2007 01:10:07 +0000 (20:10 -0500)]
[B43LEGACY]: Change the hardware radio enable logic and cleanup code

This change cleans up the radio-related messages in several ways.

(1) The state of the rfkill switch is assumed to be on, rather than
    tested. Now, any user without such a switch will not see any
    messages. For devices with such a switch, a message will be
    logged only if the initial state is off, or if the switch is toggled.
(2) The routine for testing the switch state is no longer inline.
(3) The LED handling routine is simplified.
(4) The "Radio turned off" message that has confused some users has been
    changed to "Radio initialized".

This patch is patterned after a similar change to b43 by Michael Buesch.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43LEGACY]: Support for turning the radio off from software.
Larry Finger [Fri, 21 Sep 2007 02:11:02 +0000 (21:11 -0500)]
[B43LEGACY]: Support for turning the radio off from software.

This adds support for turning the radio off in software.
That's useful in environments, where you don't want the RF
to radiate any signals, but don't want to bring the interface down.

This patch is based on a similar patch of b43 by Michael Buesch.

Signed-off-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: Support for turning the radio off from software.
Michael Buesch [Thu, 20 Sep 2007 20:14:18 +0000 (22:14 +0200)]
[B43]: Support for turning the radio off from software.

This adds support for turning the radio off in software.
That's useful in environments, where you don't want the RF
to radiate any signals, but don't want to bring the interface down.

Cc: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: Remove the "radio hw enabled" message on startup.
Michael Buesch [Thu, 20 Sep 2007 20:12:58 +0000 (22:12 +0200)]
[B43]: Remove the "radio hw enabled" message on startup.

This message is useless. Only report state changes.

Cc: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[MAC80211]: Add support for setting TX power and radio status
Michael Buesch [Thu, 20 Sep 2007 20:06:39 +0000 (22:06 +0200)]
[MAC80211]: Add support for setting TX power and radio status

This adds support for disabling the radio and setting the TXpower
through wext.
This also fixes the prism TXpower ioctl (It always overwrote the TXpower
value in ieee80211_hw_config())

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IEEE80211]: Fix softmac lockdep reports.
Johannes Berg [Thu, 4 Oct 2007 01:14:23 +0000 (18:14 -0700)]
[IEEE80211]: Fix softmac lockdep reports.

It seems I was actually able to hit this deadlock, on my quad G5 softmac
locks up more often than not. This fixes it by using an own workqueue
that can safely be flushed under RTNL.

Not sure if the patch is correct with the workqueue naming. And don't
think with the patch it doesn't continually lock up. It still does, just
doesn't invoke lockdep warnings all the time.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: Change loglevel of radio-enable message.
Michael Buesch [Wed, 19 Sep 2007 17:10:08 +0000 (19:10 +0200)]
[B43]: Change loglevel of radio-enable message.

Also cleanup the code a bit and remove the inline.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SSB]: Sparse fixes.
Michael Buesch [Wed, 19 Sep 2007 16:55:12 +0000 (18:55 +0200)]
[SSB]: Sparse fixes.

This fixes all Sparse warnings in SSB.
No semantics change.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SSB]: Use ioreadX() and iowriteX() for PCI.
Michael Buesch [Wed, 19 Sep 2007 16:53:44 +0000 (18:53 +0200)]
[SSB]: Use ioreadX() and iowriteX() for PCI.

On a PCI bus use ioreadX() and iowriteX().
We map the I/O space with pci_iomap(), so we must use the correct
accessor functions, too.
readX() and writeX() are not guaranteed to accept the cookie returned
from pci_iomap() (though, it currently works on most architectures).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: Don't lock irq_lock in debugfs txpower adjust
Michael Buesch [Wed, 19 Sep 2007 16:51:38 +0000 (18:51 +0200)]
[B43]: Don't lock irq_lock in debugfs txpower adjust

It's not required and the txpower adjustment must not be in atomic.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[P54PCI]: terminate pci table
Andrew Morton [Sun, 16 Sep 2007 22:08:37 +0000 (15:08 -0700)]
[P54PCI]: terminate pci table

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[ZD1211RD]: add USB id for Telegent TG54USB WLAN adapter
Ulrich Kunitz [Sat, 1 Sep 2007 21:40:32 +0000 (22:40 +0100)]
[ZD1211RD]: add USB id for Telegent TG54USB WLAN adapter

Reinhard Speyerer reported at 2007-08-10 a new device.

Here are the information strings.

Product: Telegent TG54USB WLAN Adapter
USB ID: 129b:1666
Chip ID: zd1211 chip 129b:1666 v4330 high 00-01-36 RF2959_RF pa0 -----
FCC ID: N89-UW620Z

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BCM43XX]: Change radio hardware switch status printk from debug to regular
Larry Finger [Sun, 16 Sep 2007 22:26:49 +0000 (17:26 -0500)]
[BCM43XX]: Change radio hardware switch status printk from debug to regular

Some distros ship bcm43xx with debugging printout disabled. For those
BCM43xx devices with radio on/off switches, this makes it impossible
to know if the radio is on or off. This patch changes a pair of debug
printk's into ordinary printk's. It also changes the message that
prints when the radio is initialized to the off state as the old message
seems to confuse users.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[ZD1211RW]: Don't needlessly initialize variable to NULL in zd_chip
Jesper Juhl [Thu, 30 Aug 2007 22:30:31 +0000 (00:30 +0200)]
[ZD1211RW]: Don't needlessly initialize variable to NULL in zd_chip

No need to initialize to NULL when variable is never used before
it's assigned the return value of a kmalloc() call.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NET]: note that NETIF_F_LLTX is deprecated
Christian Borntraeger [Wed, 26 Sep 2007 02:42:02 +0000 (19:42 -0700)]
[NET]: note that NETIF_F_LLTX is deprecated

Am Freitag, 21. September 2007 schrieb Herbert Xu:
> Please don't use LLTX in new drivers.  We're trying to get rid
> of it since it's
>
> 1) unnecessary;
> 2) causes problems with AF_PACKET seeing things twice.

I suggest to document that LLTX is deprecated.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IWLWIFI]: remove per-file CFLAGS for IWL define
Zhu Yi [Wed, 26 Sep 2007 02:34:09 +0000 (19:34 -0700)]
[IWLWIFI]: remove per-file CFLAGS for IWL define

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NET_SCHED]: explict hold dev tx lock
Jamal Hadi Salim [Wed, 26 Sep 2007 02:27:13 +0000 (19:27 -0700)]
[NET_SCHED]: explict hold dev tx lock

For N cpus, with full throttle traffic on all N CPUs, funneling traffic
to the same ethernet device, the devices queue lock is contended by all
N CPUs constantly. The TX lock is only contended by a max of 2 CPUS.
In the current mode of operation, after all the work of entering the
dequeue region, we may endup aborting the path if we are unable to get
the tx lock and go back to contend for the queue lock. As N goes up,
this gets worse.

The changes in this patch result in a small increase in performance
with a 4CPU (2xdual-core) with no irq binding. Both e1000 and tg3
showed similar behavior;

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NET]: Dynamically allocate the loopback device, part 2.
Daniel Lezcano [Wed, 26 Sep 2007 02:18:04 +0000 (19:18 -0700)]
[NET]: Dynamically allocate the loopback device, part 2.

Doing this makes loopback.c a better example of how to do a
simple network device, and it removes the special case
single static allocation of a struct net_device, hopefully
making maintenance easier.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-By: Kirill Korotaev <dev@sw.ru>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
17 years ago[NET]: Dynamically allocate the loopback device, part 1.
Daniel Lezcano [Wed, 26 Sep 2007 02:16:28 +0000 (19:16 -0700)]
[NET]: Dynamically allocate the loopback device, part 1.

This patch replaces all occurences to the static variable
loopback_dev to a pointer loopback_dev. That provides the
mindless, trivial, uninteressting change part for the dynamic
allocation for the loopback.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-By: Kirill Korotaev <dev@sw.ru>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NL80211]: add netlink interface to cfg80211
Johannes Berg [Thu, 20 Sep 2007 17:09:35 +0000 (13:09 -0400)]
[NL80211]: add netlink interface to cfg80211

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Minor coding style fixup.
David S. Miller [Thu, 20 Sep 2007 18:40:37 +0000 (11:40 -0700)]
[TCP]: Minor coding style fixup.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Avoid clearing sacktag hint in trivial situations
Ilpo Järvinen [Thu, 20 Sep 2007 18:37:19 +0000 (11:37 -0700)]
[TCP]: Avoid clearing sacktag hint in trivial situations

There's no reason to clear the sacktag skb hint when small part
of the rexmit queue changes. Account changes (if any) instead when
fragmenting/collapsing. RTO/FRTO do not touch SACKED_ACKED bits so
no need to discard SACK tag hint at all.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Enable SACK enhanced FRTO (RFC4138) by default
Ilpo Järvinen [Thu, 20 Sep 2007 18:36:37 +0000 (11:36 -0700)]
[TCP]: Enable SACK enhanced FRTO (RFC4138) by default

Most of the description that follows comes from my mail to
netdev (some editing done):

Main obstacle to FRTO use is its deployment as it has to be on
the sender side where as wireless link is often the receiver's
access link. Take initiative on behalf of unlucky receivers and
enable it by default in future Linux TCP senders. Also IETF
seems to interested in advancing FRTO from experimental [1].

How does FRTO help?
===================

FRTO detects spurious RTOs and avoids a number of unnecessary
retransmissions and a couple of other problems that can arise
due to incorrect guess made at RTO (i.e., that segments were
lost when they actually got delayed which is likely to occur
e.g. in wireless environments with link-layer retransmission).
Though FRTO cannot prevent the first (potentially unnecessary)
retransmission at RTO, I suspect that it won't cost that much
even if you have to pay for each bit (won't be that high
percentage out of all packets after all :-)). However, usually
when you have a spurious RTO, not only the first segment
unnecessarily retransmitted but the *whole window*. It goes like
this: all cumulative ACKs got delayed due to in-order delivery,
then TCP will actually send 1.5*original cwnd worth of data in
the RTO's slow-start when the delayed ACKs arrive (basically the
original cwnd worth of it unnecessarily). In case one is
interested in minimizing unnecessary retransmissions e.g. due to
cost, those rexmissions must never see daylight. Besides, in the
worst case the generated burst overloads the bottleneck buffers
which is likely to significantly delay the further progress of
the flow. In case of ll rexmissions, ACK compression often
occurs at the same time making the burst very "sharp edged" (in
that case TCP often loses most of the segments above high_seq
=> very bad performance too). When FRTO is enabled, those
unnecessary retransmissions are fully avoided except for the
first segment and the cwnd behavior after detected spurious RTO
is determined by the response (one can tune that by sysctl).

Basic version (non-SACK enhanced one), FRTO can fail to detect
spurious RTO as spurious and falls back to conservative
behavior. ACK lossage is much less significant than reordering,
usually the FRTO can detect spurious RTO if at least 2
cumulative ACKs from original window are preserved (excluding
the ACK that advances to high_seq). With SACK-enhanced version,
the detection is quite robust.

FRTO should remove the need to set a high lower bound for the
RTO estimator due to delay spikes that occur relatively common
in some environments (esp. in wireless/cellular ones).

[1] http://www1.ietf.org/mail-archive/web/tcpm/current/msg02862.html

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: Update sysctl documentation
Ilpo Järvinen [Thu, 20 Sep 2007 18:35:26 +0000 (11:35 -0700)]
[TCP] FRTO: Update sysctl documentation

Since the SACK enhanced FRTO was added, the code has been
under test numerous times so remove "experimental" claim
from the documentation. Also be a bit more verbose about
the usage.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: Improve interoperability with other undo_marker users
Ilpo Järvinen [Thu, 20 Sep 2007 18:34:38 +0000 (11:34 -0700)]
[TCP] FRTO: Improve interoperability with other undo_marker users

Basically this change enables it, previously other undo_marker
users were left with nothing. Reverse undo_marker logic
completely to get it set right in CA_Loss. On the other hand,
when spurious RTO is detected, clear it. Clearing might be too
heavy for some scenarios but seems safe enough starting point
for now and shouldn't have much effect except in majority of
cases (if in any).

By adding a new FLAG_ we avoid looping through write_queue when
RTO occurs.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Cleanup tcp_tso_acked and tcp_clean_rtx_queue
Ilpo Järvinen [Thu, 20 Sep 2007 18:33:43 +0000 (11:33 -0700)]
[TCP]: Cleanup tcp_tso_acked and tcp_clean_rtx_queue

Implements following cleanups:
- Comment re-placement (CodingStyle)
- tcp_tso_acked() local (wrapper-like) variable removal
  (readability)
- __-types removed (IMHO they make local variables jumpy looking
  and just was space)
- acked -> flag (naming conventions elsewhere in TCP code)
- linebreak adjustments (readability)
- nested if()s combined (reduced indentation)
- clarifying newlines added

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Move accounting from tso_acked to clean_rtx_queue
Ilpo Järvinen [Tue, 9 Oct 2007 08:28:45 +0000 (01:28 -0700)]
[TCP]: Move accounting from tso_acked to clean_rtx_queue

The accounting code is pretty much the same, so it's a shame
we do it in two places.

I'm not too sure if added fully_acked check in MTU probing is
really what we want perhaps the added end_seq could be used in
the after() comparison.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: clear_all_retrans_hints prefixed by tcp_
Ilpo Järvinen [Thu, 20 Sep 2007 18:30:48 +0000 (11:30 -0700)]
[TCP]: clear_all_retrans_hints prefixed by tcp_

In addition, fix its function comment spacing.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
17 years ago[TCP]: Make fackets_out accurate
Ilpo Järvinen [Tue, 9 Oct 2007 08:24:15 +0000 (01:24 -0700)]
[TCP]: Make fackets_out accurate

Substraction for fackets_out is unconditional when snd_una
advances, thus there's no need to do it inside the loop. Just
make sure correct bounds are honored.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Maintain highest_sack accurately to the highest skb
Ilpo Järvinen [Thu, 20 Sep 2007 18:28:05 +0000 (11:28 -0700)]
[TCP]: Maintain highest_sack accurately to the highest skb

In general, it should not be necessary to call tcp_fragment for
already SACKed skbs, but it's better to be safe than sorry. And
indeed, it can be called from sacktag when a DSACK arrives or
some ACK (with SACK) reordering occurs (sacktag could be made
to avoid the call in the latter case though I'm not sure if it's
worth of the trouble and added complexity to cover such marginal
case).

The collapse case has return for SACKED_ACKED case earlier, so
just WARN_ON if internal inconsistency is detected for some
reason.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: Fix sparse warnings.
Michael Buesch [Thu, 20 Sep 2007 18:13:40 +0000 (11:13 -0700)]
[B43]: Fix sparse warnings.

The remaining warning in phy.c will be fixed later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agocxgb3: trivial endianness annotations
Al Viro [Thu, 23 Aug 2007 07:04:12 +0000 (03:04 -0400)]
cxgb3: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago3c509: endianness
Al Viro [Thu, 23 Aug 2007 07:03:51 +0000 (03:03 -0400)]
3c509: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodrivers/net/appletalk: endianness
Al Viro [Thu, 23 Aug 2007 07:03:13 +0000 (03:03 -0400)]
drivers/net/appletalk: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotms380tr: trivial endianness annotations
Al Viro [Thu, 23 Aug 2007 06:57:00 +0000 (02:57 -0400)]
tms380tr: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agopppoe: endianness
Al Viro [Thu, 23 Aug 2007 06:55:33 +0000 (02:55 -0400)]
pppoe: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agovia-rhine: endianness
Al Viro [Thu, 23 Aug 2007 06:33:30 +0000 (02:33 -0400)]
via-rhine: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agor8169: endianness
Al Viro [Thu, 23 Aug 2007 06:30:16 +0000 (02:30 -0400)]
r8169: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agostarfire: trivial endianness annotations
Al Viro [Thu, 23 Aug 2007 06:29:45 +0000 (02:29 -0400)]
starfire: trivial endianness annotations

Note: we still have several fishy areas - mcast filter
and vlan handling.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodrivers/net/irda: endianness, NULL noise
Al Viro [Thu, 23 Aug 2007 04:54:10 +0000 (00:54 -0400)]
drivers/net/irda: endianness, NULL noise

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoixgb: endianness
Al Viro [Thu, 23 Aug 2007 04:47:03 +0000 (00:47 -0400)]
ixgb: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agopcnet32: endianness
Al Viro [Thu, 23 Aug 2007 04:45:46 +0000 (00:45 -0400)]
pcnet32: endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotyphoon: trivial endianness annotations
Al Viro [Thu, 23 Aug 2007 04:44:39 +0000 (00:44 -0400)]
typhoon: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotulip: endianness annotations
Al Viro [Thu, 23 Aug 2007 04:43:22 +0000 (00:43 -0400)]
tulip: endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoarcnet endianness annotations
Al Viro [Thu, 23 Aug 2007 02:59:11 +0000 (22:59 -0400)]
arcnet endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoamd8111e big-endian fix
Al Viro [Thu, 23 Aug 2007 01:42:28 +0000 (21:42 -0400)]
amd8111e big-endian fix

amd8111e_calc_coalesce() ends up with insane values of tx_data_rate since
->tx_bytes increments missing conversion from little- to host-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoamd8111e: trivial endianness annotations, NULL noise removal
Al Viro [Thu, 23 Aug 2007 01:37:46 +0000 (21:37 -0400)]
amd8111e: trivial endianness annotations, NULL noise removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago3c59x: trivial endianness annotations, NULL noise removal
Al Viro [Thu, 23 Aug 2007 01:34:46 +0000 (21:34 -0400)]
3c59x: trivial endianness annotations, NULL noise removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agofix vlan in 8139cp on big-endian
Al Viro [Thu, 23 Aug 2007 01:18:56 +0000 (21:18 -0400)]
fix vlan in 8139cp on big-endian

Layout of opts2 is
: MSB(vlan_tag) : LSB(vlan_tag) : flags : 0 :
regardless of the host endianness.  On little-endian
the current code ends up with the right values, but
on big-endian it blows.  In r8169.c the same bug
had been fixed in commit d35da12a40426184b1d0844104b1d464753eba19
(r8169: endianness fixes).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoendianness annotations drivers/net/bonding/
Al Viro [Thu, 23 Aug 2007 00:06:58 +0000 (20:06 -0400)]
endianness annotations drivers/net/bonding/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agos390 networking MAINTAINERS
Ursula Braun [Wed, 19 Sep 2007 11:09:02 +0000 (13:09 +0200)]
s390 networking MAINTAINERS

maintainer change for s390 networking

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoFS_ENET: Add polling support
Vitaly Bordug [Tue, 18 Sep 2007 16:05:35 +0000 (20:05 +0400)]
FS_ENET: Add polling support

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoFS_ENET: TX stuff should use fep->tx_lock, instead of fep->lock.
Vitaly Bordug [Tue, 18 Sep 2007 16:05:27 +0000 (20:05 +0400)]
FS_ENET: TX stuff should use fep->tx_lock, instead of fep->lock.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNET_SB1250_MAC: Rename to SB1250_MAC
Maciej W. Rozycki [Fri, 14 Sep 2007 11:05:00 +0000 (12:05 +0100)]
NET_SB1250_MAC: Rename to SB1250_MAC

 Rename NET_SB1250_MAC to SB1250_MAC to follow the convention.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNET_SB1250_MAC: Update Kconfig entry
Maciej W. Rozycki [Fri, 14 Sep 2007 10:57:33 +0000 (11:57 +0100)]
NET_SB1250_MAC: Update Kconfig entry

 The SB1250 network interfaces are Gigabit Ethernet ones.  Move the
Kconfig entry to the appropriate section and add some help text.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonetxen: ethtool fixes
Dhananjay Phadke [Mon, 3 Sep 2007 05:03:35 +0000 (10:33 +0530)]
netxen: ethtool fixes

Resubmitting the patch.

This patch improves ethtool support for printing correct ring statistics,
segmentation offload status, etc.

Signed-off by: Dhananjay Phadke <dhananjay@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoDevice tree aware EMAC driver
David Gibson [Thu, 23 Aug 2007 03:56:01 +0000 (13:56 +1000)]
Device tree aware EMAC driver

Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs.  The
same ASIC is also found in the Axon bridge chip.  This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.

This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac).  The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).

This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging.  Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices.  The dependencies here between
EMAC, MAL, ZMII etc. make this complicated.  At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago8139cp: trivial endianness annotations
Al Viro [Thu, 23 Aug 2007 01:31:17 +0000 (02:31 +0100)]
8139cp: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoBlackfin EMAC driver: add a select for the PHYLIB of this driver
Bryan Wu [Wed, 19 Sep 2007 15:37:41 +0000 (23:37 +0800)]
Blackfin EMAC driver: add a select for the PHYLIB of this driver

Since we are adding requirement for the PHYLIB for this driver, there should be a select for that

Cc: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoBlackfin EMAC driver: Add phy abstraction layer supporting in bfin_emac driver
Bryan Wu [Wed, 19 Sep 2007 15:37:36 +0000 (23:37 +0800)]
Blackfin EMAC driver: Add phy abstraction layer supporting in bfin_emac driver

 - add MDIO functions and register mdio bus
 - add phy abstraction layer (PAL) functions and use PAL API
 - test on STAMP537 board

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoBlackfin EMAC driver: add power management interface and change the bf537mac_reset...
Bryan Wu [Wed, 19 Sep 2007 15:37:14 +0000 (23:37 +0800)]
Blackfin EMAC driver: add power management interface and change the bf537mac_reset to bf537mac_disable

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoBlackfin EMAC driver: add function to change the MAC address
Alex Landau [Wed, 19 Sep 2007 15:14:18 +0000 (23:14 +0800)]
Blackfin EMAC driver: add function to change the MAC address

Alex Landau writes in the forums:
 Previously, changing the MAC address (e.g. via ifconfig) resulted
 in a generic function to be called that only changed a variable in
 memory. This patch also updated the Blackfin MAC address registers
 to filter the correct new MAC.

Signed-off-by: Alex Landau <lirsb@yahoo.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Updating transceiver information in ethtool function
Sivakumar Subramani [Fri, 14 Sep 2007 11:43:16 +0000 (07:43 -0400)]
S2io: Updating transceiver information in ethtool function

- Update transceiver information in ethtool function

Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Added support set_mac_address driver entry point
Sivakumar Subramani [Fri, 14 Sep 2007 11:39:19 +0000 (07:39 -0400)]
S2io: Added support set_mac_address driver entry point

- Added set_mac_address driver entry point
- Copying permanent mac address to dev->perm_addr
- Incorporated following review comments from Jeff
     - Converted the macro to a function and removed call to memset
     - regarding function naming convention, for all callbacks and entry points
       will have 's2io_' prefix and helper functions will have 'do_s2io_' prefix.

Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Removed unused feature - bimodal interrupts
Sivakumar Subramani [Tue, 18 Sep 2007 22:14:20 +0000 (18:14 -0400)]
S2io: Removed unused feature - bimodal interrupts

Removed bimodal interrupt support - unused feature

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
[also, trim trailing whitespace]

17 years agoS2io: Change kmalloc+memset to k[zc]alloc
Sivakumar Subramani [Fri, 14 Sep 2007 11:28:50 +0000 (07:28 -0400)]
S2io: Change kmalloc+memset to k[zc]alloc

- Changed kmalloc+memset to k[zc]alloc as per Mariusz's patch
  <m.kozlowski@tuxland.pl>

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count
Jeff Garzik [Thu, 4 Oct 2007 01:07:32 +0000 (18:07 -0700)]
[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count

These have been superceded by the new ->get_sset_count() hook.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B44]: port to native ssb support
Michael Buesch [Wed, 19 Sep 2007 21:20:30 +0000 (14:20 -0700)]
[B44]: port to native ssb support

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[P54]: add mac80211-based driver for prism54 softmac hardware
Michael Wu [Wed, 26 Sep 2007 01:11:01 +0000 (18:11 -0700)]
[P54]: add mac80211-based driver for prism54 softmac hardware

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()
Joe Perches [Thu, 4 Oct 2007 00:59:30 +0000 (17:59 -0700)]
[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()

This is nicer than the MAC_FMT stuff.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[RT2x00]: add driver for Ralink wireless hardware
Ivo van Doorn [Wed, 26 Sep 2007 00:57:13 +0000 (17:57 -0700)]
[RT2x00]: add driver for Ralink wireless hardware

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IWLWIFI]: add iwlwifi wireless drivers
Zhu Yi [Wed, 26 Sep 2007 00:54:57 +0000 (17:54 -0700)]
[IWLWIFI]: add iwlwifi wireless drivers

This patch adds the mac80211 based wireless drivers for the Intel
PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi
Link AGN (4965) adapters.

[ Move driver into it's own directory -DaveM ]

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices
Larry Finger [Tue, 25 Sep 2007 23:46:54 +0000 (16:46 -0700)]
[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[B43]: add mac80211-based driver for modern BCM43xx devices
Michael Buesch [Tue, 18 Sep 2007 19:39:42 +0000 (15:39 -0400)]
[B43]: add mac80211-based driver for modern BCM43xx devices

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SSB]: add Sonics Silicon Backplane bus support
Michael Buesch [Tue, 18 Sep 2007 19:12:50 +0000 (15:12 -0400)]
[SSB]: add Sonics Silicon Backplane bus support

SSB is an SoC bus used in a number of embedded devices.  The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well.  The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.

This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Return useful listenq info in tcp_info and INET_DIAG_INFO.
Rick Jones [Tue, 18 Sep 2007 20:26:31 +0000 (13:26 -0700)]
[TCP]: Return useful listenq info in tcp_info and INET_DIAG_INFO.

Return some useful information such as the maximum listen backlog and
the current listen backlog in the tcp_info structure and
INET_DIAG_INFO.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETNS]: Cleanup list walking in setup_net and cleanup_net
Pavel Emelyanov [Tue, 18 Sep 2007 20:20:41 +0000 (13:20 -0700)]
[NETNS]: Cleanup list walking in setup_net and cleanup_net

I proposed introducing a list_for_each_entry_continue_reverse macro
to be used in setup_net() when unrolling the failed ->init callback.

Here is the macro and some more cleanup in the setup_net() itself
to remove one variable from the stack :) The same thing is for the
cleanup_net() - the existing list_for_each_entry_reverse() is used.

Minor, but the code looks nicer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NET]: Add Tehuti network driver.
Andy Gospodarek [Tue, 18 Sep 2007 01:50:36 +0000 (18:50 -0700)]
[NET]: Add Tehuti network driver.

[ Ported to napi_struct changes... -DaveM ]

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPG]: add IP1000A driver to kernel tree
Francois Romieu [Tue, 18 Sep 2007 00:13:55 +0000 (17:13 -0700)]
[IPG]: add IP1000A driver to kernel tree

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Tie ADD-IP and AUTH functionality as required by spec.
Vlad Yasevich [Mon, 17 Sep 2007 02:35:39 +0000 (19:35 -0700)]
[SCTP]: Tie ADD-IP and AUTH functionality as required by spec.

ADD-IP spec requires AUTH. It is, in fact, dangerous without AUTH.
So, disable ADD-IP functionality if the peer claims to support
ADD-IP, but not AUTH.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: API updates to suport SCTP-AUTH extensions.
Vlad Yasevich [Mon, 17 Sep 2007 02:34:00 +0000 (19:34 -0700)]
[SCTP]: API updates to suport SCTP-AUTH extensions.

Add SCTP-AUTH API.  The API implemented here was
agreed to between implementors at the 9th SCTP Interop.
It will be documented in the next revision of the
SCTP socket API spec.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Implement the receive and verification of AUTH chunk
Vlad Yasevich [Thu, 4 Oct 2007 00:51:34 +0000 (17:51 -0700)]
[SCTP]: Implement the receive and verification of AUTH chunk

This patch implements the receive path needed to process authenticated
chunks.  Add ability to process the AUTH chunk and handle edge cases
for authenticated COOKIE-ECHO as well.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Enable the sending of the AUTH chunk.
Vlad Yasevich [Mon, 17 Sep 2007 02:32:45 +0000 (19:32 -0700)]
[SCTP]: Enable the sending of the AUTH chunk.

SCTP-AUTH, Section 6.2:

   Endpoints MUST send all requested chunks authenticated where this has
   been requested by the peer.  The other chunks MAY be sent
   authenticated or not.  If endpoint pair shared keys are used, one of
   them MUST be selected for authentication.

   To send chunks in an authenticated way, the sender MUST include these
   chunks after an AUTH chunk.  This means that a sender MUST bundle
   chunks in order to authenticate them.

   If the endpoint has no endpoint pair shared key for the peer, it MUST
   use Shared Key Identifier 0 with an empty endpoint pair shared key.
   If there are multiple endpoint shared keys the sender selects one and
   uses the corresponding Shared Key Identifier

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Implete SCTP-AUTH parameter processing
Vlad Yasevich [Mon, 17 Sep 2007 02:32:11 +0000 (19:32 -0700)]
[SCTP]: Implete SCTP-AUTH parameter processing

Implement processing for the CHUNKS, RANDOM, and HMAC parameters and
deal with how this parameters are effected by association restarts.
In particular, during unexpeted INIT processing, we need to reply with
parameters from the original INIT chunk.  Also, after restart, we need
to update the old association with new peer parameters and change the
association shared keys.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Implement SCTP-AUTH initializations.
Vlad Yasevich [Mon, 17 Sep 2007 02:31:35 +0000 (19:31 -0700)]
[SCTP]: Implement SCTP-AUTH initializations.

The patch initializes AUTH related members of the generic SCTP
structures and provides a way to enable/disable auth extension.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>